MULTI AND SINGLE SPINDLE BAR LOADER

®

MULTI LSMULTI L

1. Increase in lathe productivity by up 45% 2. Reduced loading time 3. Channel guide in material resistant to wearing 4. Removal of the lathe feeding system a. Increase of lathe capacity > Ø 5. Bar feeding in any position, also in multiple stations simultaneously 6. Removal of the complete lathe stock reel. 7. Compact and contained dimensions 8. Optional devices to contain vibrations a. Rotary centering device b. Automatic spring bushing c. Fork centering device d. Double Spring Bushing

TECHNICAL DATA

SpecificationsBar diameters Depending on lathe model (Standard min Ø5mm max Ø95mm)

Special Ø on demandBar length 3200mm - 3400mm - 3700mm (12ft) - 4300mm (14ft) - 5000mm (16ft)Bar Rack capacty Standard 500 – 750mm (20” – 30”)

Bundle loader capacity 1,2 t (Special capacity on demand)Bar feeding HydraulicBar change time 15 – 25 sec

Depending on bar length (3m/4m)

1. Increase in lathe productivity by up 45%2. Reduced loading time3. Channel guide in material resistant to wearing4. Removal of the lathe feeding system a. Increase of lathe capacity > Ø5. Bar feeding in any position, also in multiple stations simultaneously 6. Removal of the complete lathe stock reel.7. More compact and contained dimensions in comparison to the MULTI L8. Optional devices to contain vibrations a. Rotary centering device b. Automatic spring bushing c. Fork centering device d. Double Spring Bushing

MULTI LS

TECHNICAL DATA

SpecificationsBar diameters Depending on lathe model (Standard min Ø5mm max Ø95mm)

Special Ø on demand Bar length 3200mm - 3400mm - 3700mm (12ft) - 4300mm (14ft) - 5000mm (16ft)Bar feeding Standard 500 – 750mm (20” – 30”)

Bundle loader capacity 1,2 t (Special capacity on demand) Vorschub HydraulicBar change time 25 – 33 sec

Depending on bar length (3m/4m)

1. Increase in lathe productivity by up 45% 2. Reduced loading time 3. Channel guide in material resistant to wearing 4. Removal of the lathe feeding system a. Increase of lathe capacity > Ø 5. Bar feeding in any position, also in multiple stations simultaneously 6. Removal of the complete lathe stock reel. 7. Compact and contained dimensions 8. Optional devices to contain vibrations a. Rotary centering device b. Automatic spring bushing c. Fork centering device d. Double Spring Bushing

MULTI F

1. Increase in lathe productivity2. Reduced loading time3. Channel guide in material resistant to wearing 4. Guides lubrication 5. Quick channel change system6. Special channel segments for polygonal bars7. Sliding upper frame for easy access to the feed finger operation area8. Fast and precise bar insertion by means of an electric motor9. Removal of the complete lathe stock reel.10. Extremely compact design 11. Option to reduce vibrations a. Forks centering device

TECHNICAL DATASpecificationsBar diameters Depending on lathe model (Standard min Ø5mm max Ø80mm)

Special Ø on demand Bar Lenght 3200mm - 4000mmBar Rack capacity Standard 300 – 1000mm

Bundle capacity 1,2 to (Special capacity on demand)Bar feeding By the automatic latheBar change time Depending on bar length (3,3m/4m)

SINGLE SPINDLE BAR LOADERONE 42 AND ONE 42s

1. Increase of capacity2. Reduction of loading time3. Guide channel made of plastic segments resistant to wearing.4. Hydrodinamic guiding design5. Quick channel change system6. Insertion in the spindle corresponding to the bar diameter worked 7. Centralized adjustment of the diameter worked

Option . Teleservice. Bar feeding by means of linear axis

TECHNICAL DATASpecificationsBar diameters Depending on lathe model (Standard min Ø5mm max Ø42mm)

Special Ø on demand Bar Length 3200mm - 4000mmBar Rack capacity Standard 500 – 750mm (20‘‘ – 30‘‘)

Bundle capacity 1,2 to (Special capacity on demand)Bar feeding ElectricBar change time 15 - 24 sec

Depending on bar length (3,3m/4m)

PB 42Bar Length 3200mm - 4000mm

Total Length(L) 4500mm - 5300mm W - Width 650mmWF - Width with bundle 1550mmWeight 1300kg - 1450kg - (bundle 750kg)

TECHNICAL DATA

SINGLE SPINDLE BAR LOADER ONE 65

1. Increase of capacity2. Reduction of loading time3. Guide channel made of plastic segments resistant to wearing.4. Hydrodinamic guiding design5. Quick channel change system6. Insertion in the spindle corresponding to the bar diameter worked 7. Centralized adjustment of the diameter worked

Option . Teleservice. Bar feeding by means of linear axis

PB 65Bar Lenghth 3300mm - 3700mm - 4300mmTotal length (L) 4650mm - 5050mm - 5650mmW - Width 830mmWF - Width with bundle 1562mmWeight 1500kg - 1700kg - 2050kg

SpecificationsBar diameters Depending on lathe model (Standard min Ø 5mm max Ø 65 mm)

Special Ø on demand Bar Length 3200mm - 3700mm - 4000mmBar Rack capacity Standard 500 – 750mm (20‘‘ – 30‘‘)

Bundle capacity 1,2 to (Special capacity on demand)Bar feeding ElectricBar change time 25 - 30 sec

Depending on bar length (3,3m/4m)

1. Increase of capacity2. Reduction of loading time3. Guide channel made of plastic segments resistant to wearing.4. Hydrodinamic guiding design5. Quick channel change system6. Insertion in the spindle corresponding to the bar diameter worked 7. Centralized adjustment of the diameter worked

Option . Teleservice. Bar feeding by means of linear axis . Automatic bar discharge when the material change is needed. Automatic remnant removal by the loader

SINGLE SPINDLE BAR LOADERONE 92

SpecificationsBar diameters Depending on lathe model (Standard min Ø9mm max Ø92mm)

Special Ø on demand Bar length 3200mm - 3700mm - 4000mmBar Rack capacity Standard 500 – 750mm (20‘‘ – 30‘‘)

Bundle capacity 1,2 to (Special capacity on demand)Bar feeding ElettricoBar change time 30 - 40 sec

Depending on bar length (3,3m/4m)

PB 92Bar lenght 3300mm - 3700mm - 4300mmTotal length (L) 4650mm - 5050mm - 5650mmW - Width 1020mmWF - Width with bundle 1732mmWeight 2300kg - 2500kg - 2950kg

TECHNICAL DATA

BAR CENTERING AND CONTROL DEVICES OPTIONS FOR MULTI L/LS

1. Drum section and detail of the components making up the bar guide channel2. Detail of the fork centering device arranged along the length of the bar guide channel in accordance with the lathe model and bar length3. Rotary centering device

1

2 3

Functional principle of the automatic spring bushing

1. Basic position of the automatic spring bushing2. Pusher insertion and spring bushing closing

1 2

BAR CENTERING AND CONTROL DEVICES OPTIONS FOR MULTI L/LS

4

5 6

7

4. Automtic spring bushing, vibrations reduction in the lathe spindle5. Double spring bushing with sliding spring; additional vibrations reduction in the lathe spindle6. Lathe collet7. Bar being machined

3. Spring bushing completely closed4. Spring bushing completely forward

3 4

OPTIONAL LOADING DEVICES FOR MULTI L/LS/FLifter

1. Improved loading ergonomics by reducing the loading height position for loading operations without crane system2. Increase of bar units on the rack3. Affordable retrofit options for all the rack type loader

TECHNICAL DATA

SpecificationsBar diameters Depending on lathe model (Standard min Ø5mm max Ø95mm)

Special Ø on demand Bar length 3200mm - 3400mm - 3700mm (12ft) - 4300mm (14ft) - 5000mm (16ft)Loading capacity Up to 15 bars

OPTIONAL LOADING DEVICES FOR MULTI L/LS/F/ONEBundle loading system

1. Improvement of loading ergonomics, loading by crane or forklift2. Increase of bar units in the rack3. Retrofit option for all the rack type loader4. Available as fix or moving system

SpecificationsBar diameters Depending on lathe model (Standard min Ø9mm max Ø95mm)

Special Ø on demandBar length 3200mm - 3400mm - 3700mm (12ft) - 4300mm (14ft) - 5000mm (16ft)Loading capacity Bundle capacity 1,2 to (Special capacity on request)

TECHNICAL DATA

SPARE PARTS MULTI L/LS

Spare parts to be changed in accordance with the bar diameter: Collets Forks Spring bushing insert

Diameter range is adjustable

SPECIAL SOLUTIONS

Maxi-Loader from Ø25mm to Ø400mm

Loader Transfer machine

Loader for sawing machine

REFERENCES

marangonTORNERIA AUTOMATICA - PARTICOLARI A DISEGNO - RACCORDI PER RISCALDAMENTO LAVORAZIONI OTTONE

marangonTORNERIA AUTOMATICA - PARTICOLARI A DISEGNO - RACCORDI PER RISCALDAMENTO LAVORAZIONI OTTONE

marangonTORNERIA AUTOMATICA - PARTICOLARI A DISEGNO - RACCORDI PER RISCALDAMENTO LAVORAZIONI OTTONE

marangonTORNERIA AUTOMATICA - PARTICOLARI A DISEGNO - RACCORDI PER RISCALDAMENTO LAVORAZIONI OTTONE

SPARE PARTS CATALOGUE

Distributor

®

The information contained in this catalogue is of an advertising and promotional nature. The terms and conditions of sale of products and technical support are ruled by the company’s General Terms of Sales and by the order acknowledgement.The images published on this brochure are for explanatory purposes only.

The automatic bar loaders are sold by Cucchi BLT Srl Italy and the worldwide branches. They represent the corporate and product philosophy of the company Cucchi BLT, which focuses on quality, reliability, care in detail solutions as well as the alignment based on the requirements of the customer.

The sales and service network is constantly controlled by the headquarter, which serves the maintenance, deve-lopment, quality, service and standard worldwide. This results in an excellent Customer care.

Cucchi BLT srlVia dei Lavoratori 111

20092 Cinisello Balsamo (MI) - ItalyTel: +39 02 95 24 31 1 info@cucchi-blt.com

Cucchi BLT America, Inc.1520 Industrial Drive, Unit C

Lake in the Hills Illinois 60156 USA

inquiries@cucchi-blt.com

Cucchi BLT Deutschland GmbHHeiner-Fleischmann-Strasse 774172 NeckarsulmGermanyTel: +49 (0)71 32 95 17 10loader@cucchi-blt.com

www.cucchi-blt.com