Multi-turn gearboxes

Spur gearboxes GSTI 25.1 – GSTI 40.1

for use in nuclear power plants

Outside and Inside Containment

Torques up to 16,000 Nm

Product description

2 |

Applications

AUMA GSTI multi-turn gearboxes are used in nuclear

power plants for the automation of gate valves and globe

valves with high torque requirements. For this purpose

they are combined with an AUMA SAN or SAI actuator or

with any other multi-turn actuator which has been quali-

fied accordingly.

The gearboxes are certified according to IEEE 382-1996.

They are qualified for use in outside and inside contain-

ment applications.

The GSTI gearbox range is ideally adapted to AUMA

SAN and SAI multi-turn actuators. By combining the

multi-turn actuators with a GSTI gearbox, the maximum

torque range is expanded from a maximum of 1,600 Nm

for SAN or 1,000 Nm for SAI to up to 16,000 Nm.

| 3

Solutions for a world in motion

Subject to change without notice.The product features and technical data provided do not express or imply any warranty.

This brochure will provide both the beginner and the

expert with an overview of the functions and applications

of AUMA GSTI multi-turn gearboxes. It can be used as the

basis to determine whether a device is suitable for the

chosen application.

For detailed product selection refer to the separate data

sheets and price lists. On request, AUMA engineers within

field service and within our subsidiaries can help you find

the correct device for the application.

Since the mid-1970s, AUMA has been producing

devices for the use in nuclear power plants which have

provided long-term operational reliability in this field.

GSTI multi-turn gearboxes are based on the GST

multi-turn gearbox whose first generation was introduced

to the market as early as 1970. Ever since the gearboxes

have been continuously improved. A sophisticated design

and the use of first grade materials ensure long-term and

virtually maintenance-free operation.

The latest detailed information on the GSTI multi-turn

gearboxes can be found on the Internet under

www.auma.com. All documents, including dimensional

drawings, wiring diagrams and final inspection records for

supplied gearboxes are available on the Internet in digital

form.

Table of contents

Modular design/versions 4

Summary of applications,

functions, and equipment 6

Design principle 7

Service conditions 8

Functions 10

Valve attachment 11

Technical data 12

Certificates 13

Quality is not just a matter of trust 14

The actuator specialist 15

Literature 16

Index 17

AUMA worldwide 18

2011

-01-

26

4 |

Modular design/versions

Modular concept – different applicationsValves in nuclear power plants are used in areas with dif-

ferent safety relevance (outside containment and inside con-

tainment) but also in conventional areas. They are available in

many designs and different sizes. Gate valves and globe

valves with diameters ranging from a few centimetres to sev-

eral metres are to be opened and closed electrically.

AUMA meets the various requirements with their modular

product range. GST and GSTI multi-turn gearboxes are central

elements of this product range. The GST range is suitable for

use in conventional applications and is described in a sepa-

rate brochure.

The GSTI range is qualified for inside containment and

therefore also for outside containment. It can be adapted to

various valve requirements. Due to the possible combinations

with AUMA SAN or SAI actuators, available in a number of

sizes and versions, various solutions for the automation of

gate and globe valves can be found. Combinations with

multi-turn actuators from the SAN range are approved for

use outside containment, combinations with SAI multi-turn

actuators are for inside containment.

Large gate and globe valves within a nuclear power plant

can be automated using these combinations. The largest

combinations provide torques up to 16 000 Nm.

For information on the SAN and SAI multi-turn actuators

refer to the brochures below:

■ Product description

Electric multi-turn actuators

for the automation of valves

inside containment

in nuclear power plants

SAI 6 – SAI 100

SARI 6 – SARI 100

■ Product description

Electric multi-turn actuators

for the automation of valves

outside containment

in nuclear power plants

SAN 07.1 – SAN 25.1

SARN 07.1 – SARN 25.1

Shutting off and positioning

The duty type is an important selection condition for gear-

boxes used in combination with a multi-turn actuator. Is the

valve to be used as a shut-off device (open-close duty )or is

the valve to be positioned in mid-travel (positioning mode)?

AUMA GSTI multi-turn gearboxes are suitable for

open-close duty and positioning mode.

| 5

[1] GSTI spur gearboxes

The designation spur gearbox refers to thegearbox design principle.

[2] Multi-turn actuator/spur gearboxcombinations SAN/GSTI

Torques up to 16,000 NmMulti-turn actuators SAN 07.1 – SAN 25.1

are approved for outside containment use. Thecombination of SAN multi-turn actuators andGSTI gearboxes are therefore suitable for useoutside containment.

The multi-turn actuator is mounted with ascrew connection to the flange for actuator ofthe gearbox which can easily be removed formaintenance purposes. The flange connectionbetween multi-turn actuator and gearboxmeets the requirements of EN ISO 5210or DIN 3210 as an alternative.

[3] Multi-turn actuator/spur gearboxcombinations SAI/GSTI

Torques up to 16,000 NmMulti-turn actuators SAI 6 – SAI 100 for

open-close duty are approved for inside con-tainment use.The combination of SAI multi-turn actuatorsand GSTI gearboxes are therefore suitable forinside containment use .

The connection between actuator and gear-box is identical to the connection used forSAN/GSTI combinations.

[4] Stem protection tube

Gate valves often have rising stems. Youmay equip the gearbox with a stem protectiontube. The tube protects the stem from soilingand climatic influences and avoids any dangerof injury.Stem protection tubes are available in differentlengths up to a maximum of 1,000 mm.

[2]

[3]

[1]

[4]

6 |

Summary of applications, functions, and equipment

Standard ●

Option ■ GSTI 25.1 – GSTI 40.1 Page

Applications/duty types

Open-close duty ● 4

Positioning duty ● 4

Service conditions

Enclosure protection IP 68-6 ● 8

Corrosion protection KI ● 9

Resistant to DBE temperature ● 9

Vibration resistance ● 9

Radiation resistance ● 8

Functions

Reduction of input torques ● 10

Valve attachment according to EN ISO 5210/DIN 3210

Output drive types B, B1 ● 11

A, B2, B3, B4, E ■ 11

Special output drives ■ 11

| 7

Design principle

[1]

[2]

[3] Spur gear

This gear type is easy to install and of ro-bust and cost-effective design. The reductionratio extends the torque range of the multi-turnactuator. You have to make sure that the re-duced running speed caused by the gear reduc-tion is still sufficient for your individualapplication.

[4]

[5] Screw plug

The screw plug prevents the ingress of dustand humidity. For rising stems with large thrust,the screw plug is replaced by a stem protectiontube (refer to page 5).

[6]

HousingThe housing is made of spheroidal cast iron

GJS-400-15. This material is resistant to extremevibrations caused e.g. by an earthquake or anairplane crash.

[5]

Valve attachmentThe mounting flange is according to

EN ISO 5210 or DIN 3210.Various output drive types are available. There-fore it is possible to adapt to different types ofvalves. For further information refer to page 11.

[3] [4]

Flange for mounting a multi-turn actua-tor

The flange sizes are according toEN ISO 5210 (optional DIN 3210).The combination between spur gearbox andmulti-turn actuator offers a space-saving advan-tage as the actuator mounting position can beshifted by the distance between gearbox inputflange and output drive flange. Providing a so-lution for your specific installation requirements.

Free shaft endIn case of unfavourable space conditions

where direct mounting of the multi-turn actua-tor is not possible, the input torque may alsobe supplied via a shaft with universal joint atthe free shaft end.

[1]

[2]

[6]

8 |

Service conditions

Devices for use in nuclear power plants have to remain

fully operable, not only under normal operation, but also

under DBE conditions.

During comprehensive testing the devices have to with-

stand the most extreme loads and conditions.

Vibration test of an AUMA GSTI multi-turn gearbox with mountedmulti-turn actuator during qualification for use in nuclear power plants.

Qualification of the gearboxes in accordancewith IEEE 382-1996

The following test was performed and passed. Functional

tests are performed between the individual test stages.

Test steps

Thermal ageing

700 h at 100 °C

Mechanical ageing

OPEN-CLOSE duty2,000 cycles with a load profile inaccordance with KTA 3504-9/88

Normal radiation ageing test

Dose: 700 kGy

Pressurisation cycle test

1 x 5.5 bar for 10 min; 14 x 5.5 bar for 3 min

Vibration tests GSTI gearbox with suitable multi-turn actuator

Simulation of inducedvibrations

5 – 200 Hz with 0.75 g per axis

OBE (Operating BasisEarthquake)1

2 – 35 – 2 Hz with 3 g

SSE (Safe ShutdownEarthquake)2

2 – 35 – 2 Hz with 4.5 g

Airplane crash 5 – 100 Hz with 5 g

Mechanical lifetime

OPEN-CLOSE duty3,000 cycles with a load profile inaccordance with KTA 3504-9/88

Temperature test

185 °C over a period of one hour

Radiation (DBE conditions)

Dose: 1.2 x 106 Gy; rate: 5 kGy/h

Temperature test

185 °C over a period of one hour

1 An earthquake which could reasonably be expected to affect theplant site during the operating life of the plant without interruptingthe operation of the plant.

2 An earthquake which produces the maximum vibratory ground mo-tion. The capability to shut down the reactor and maintain it in safeshutdown condition must be ensured.

| 9

Corrosion protection/ColourCorrosion protection KI

This corrosion protection was specially developed for

AUMA devices used in nuclear power plants.

All outside parts as well as the coatings are free from alu-

minium. Housing parts are sandblasted before painting. A

primer coating and two intermediate coats are applied to this

surface before finish coating.

A decontaminable two-component paint is used for finish

coating.

The total film thickness is at least 280 μm.

Colour

The standard colour of the finish coating is silver-grey

(RAL 7001). Other colours are available on request.

Enclosure protectionIP 68-6

According to EN 60 529, the conditions to fulfil enclosure

protection IP 68 are not defined. In the basic version the GSTI

gearboxes are supplied in enclosure protection IP 68-6.

IP 68-6 means protection against ingress of water during sub-

mersion up 6 m head of water.

Ambient temperaturesThe specified values are also valid for high humidity

(> 95 %).

Normal operation■ – 25 °C to + 80 °C

DBE conditions■ up to + 185 °C for a short period

10 |

Functions

The basic function of the GSTI multi-turn gearboxes

is described as follows: Decrease of the input torque required

at the valve by means of a reduction ratio.

The demands on the device are high and clearly stipulated

in the corresponding standards, e.g. IEEE 382. The gearboxes

have to operate reliably over the entire planned operation

time of the power plant and even under DBE conditions.

Furthermore installation and commissioning should be easy

and the maintenance requirements low. Revision work and

inspections can be quickly and easily performed and therefore

downtimes are considerably reduced.

The high demands on availability and ease of maintenance

can only be met by a sophisticated design. The GSTI gearbox

range is an excellent example of this.

Reduction of input torquesThe maximum torque of the SAN multi-turn actuator range

is 1,600 Nm and of the SAI range, 1,000 Nm. However, this

is not sufficient for some valves. In these cases, the actuators

are combined with a GSTI gearbox. Large valves with torque

requirements up to 16 000 Nm can be operated with AUMA

actuator/gearbox combinations.

The increased operating time caused by the reduction ratio

can be compensated for by using multi-turn actuators with

higher output speeds. This has to be observed when sizing

the actuator.

Output torques of up to 16,000 Nm can be achievedby combining a multi-turn gearbox GSTI 40.1 (16:1) with an SAN 25.1multi-turn actuator …

or a multi-turn gearbox GSTI 40.1 (22:1) with an SAI 100 multi-turn actu-ator.

| 11

Valve attachment

The gearboxes are mounted to the valve using a mounting

flange standardised according to EN ISO 5210 or DIN 3210.

The output drive types are also manufactured according to

these standards. They establish the mechanical connection

between the output drive of the gearbox and the valve stem

or the valve shaft. The torque is transmitted from the gearbox

to the valve using this connection. There are various output

drive types available for different valve types.

[1] Output drive types B1, B2(EN ISO 5210), or B (DIN 3210)

This output drive is integrated into the hol-low shaft of the gearbox. The torque is trans-mitted via a parallel key. Low radial loads canbe accepted.

[2] Output drive types B3 or B4(EN ISO 5210), or E (DIN 3210)

The torque is transmitted via a parallel key.By using a plug sleeve, output drive type B1can easily be converted to output drivetypes B3 or B4.

[3] Output drive type A(EN ISO 5210/DIN 3210)

Stem nut for rising and non-rotating valvestem. The mounting flange together with thestem nut and thrust bearings form an assembly,which is suitable for accepting thrust. The unitis screwed to the gearbox. Output drive type Acannot accept any radial loads.

[4] Output drive type AF(EN ISO 5210/DIN 3210)

Spring-loaded stem nut for rising andnon-rotating valve stems. The springs compen-sate for dynamic thrust at high speeds or evenfor thermal expansion of the valve stem. Thetorque transmission is supplied via internalteeth.

[1] [2]

[3]

[4]

12 |

Technical data

Spur gearboxes GSTI 25.1 – GSTI 40.1For detailed data refer to the separate technical data sheets.

Type Output torque Reduction ratio Input torque Valve attachment

Nominal torquemax. [Nm]

Nominal torque[Nm]

StandardEN ISO 5210

OptionDIN 3210

GSTI 25.1 2,0004 : 15.6 : 18 : 1

556397278

F25 G4

GSTI 30.1 4,0005.6 : 18 : 111 : 1

794556404

F30 G5

GSTI 35.1 8,0008 : 111 : 116 : 1

1,111808556

F35 G6

GSTI 40.1 16,00011 : 116 : 122 : 1

1,6161,111808

F40 G71

1 without spigot ring

Possible combinations with multi-turn actuatorsFor detailed data refer to the separate technical data sheets.

GSTI spur gearboxes with SAI multi-turn actuators

Gearbox Suitable AUMA multi-turn actuator

GSTI 25.1 SAI 50

GSTI 30.1 SAI 50; SAI 100

GSTI 35.1 SAI 100

GSTI 40.1 SAI 100

GSTI spur gearboxes with SAN multi-turn actuators

Gearbox Suitable AUMA multi-turn actuator

GSTI 25.1 SAN 14.5

GSTI 30.1 SAN 14.5; SAN 16.1

GSTI 35.1 SAN 14.5; SAN 16.1

GSTI 40.1 SAN 16.1; SAN 25.1

Lifetime of the gearboxes5,000 operating cycles with a load profile in accordance

with KTA 3504-9/88.

| 13

Certificates

Declaration of incorporationDeclaration of incorporation in accordance with

Machinery Directive

According to this EU directive, AUMA actuators, actuator

controls and valve gearboxes are not complete machines. This

means that a Declaration of conformity in accordance with

the Machinery Directive cannot be issued by AUMA. AUMA’s

Declaration of Incorporation confirms that during the design

stage of the devices, the standards mentioned in the Machin-

ery Directive were applied. The Declarations of Incorporation

are included in the operation instructions of the devices.

Only by mounting the devices to other components

(valves, pipelines etc.) a ‘machine’ within the meaning of the

directive is formed. Before commissioning this machine a Cer-

tificate of Conformity must be issued.

Compulsory marking with CE mark

AUMA products meet the requirements of the mentioned

EU directives. The name plate is therefore marked with the

CE mark.

Final inspection recordAfter assembly all gearboxes are thoroughly tested accord-

ing to AUMA’s inspection specification. The procedure is

recorded on the final inspection record.

Where can I get the certificates?All certificates and records are provided by AUMA on

request either as a hard or digital copy.

The documents can be downloaded from the AUMA

website around the clock; some of them are password pro-

tected.

■ www.auma.com

Test certificateThe test authority confirms the successful performance of

the type tests in accordance with IEEE 382-1996 with a test

certificate.

14 |

Quality is not just a matter of trust

Actuators must be reliable and dependable. They deter-

mine the cycle of accurately defined work processes.

But reliability does not begin during commissioning. It

begins with a well thought out design and careful selection

of materials. This continues with conscientious production

using ultra-modern machinery in clearly controlled and super-

vised steps, while keeping in mind the environment.

At AUMA, quality management is monitored on a daily

basis. Numerous customer and independent audits, backed

by ISO 9001 and ISO 14001 certification confirm these high

standards.

| 15

The actuator specialist

At AUMA, everything revolves around the electric actuator.

In a world where industrial processes have become increas-

ingly complex, concentration is an asset – while still being

able to see the bigger picture.

AUMA has to cope with a multitude of requirements from

the most different applications and from every corner of the

world - this is our daily business. We rise to this challenge by

pursuing a clear but flexible product policy – supplying the

ideal actuator to every customer.

For this purpose, you have to know your markets. Thinking

globally means acting regionally. A comprehensive worldwide

sales and service network ensures that there is a competent

local contact for every customer.

Since 1964, AUMA has established an excellent brand

name in the world of actuators. Reliability and innovation are

concepts which are closely linked with AUMA. This is above

all to be credited to AUMA’s dedicated employees who work

devotedly on the future of the actuator.

16 |

Literature

Further literatureBrochures■ Product description

Electric multi-turn actuators

for the automation of valves

outside containment

in nuclear power plants

SAN 07.1 – SAN 25.1

SARN 07.1 – SARN 25.1

■ Product description

Electric multi-turn actuators

for the automation of valves

inside containment

in nuclear power plants

SAI 6 – SAI 100

SARI 6 – SARI 100

■ Product description

Multi-turn gearboxes

for the operation or automation

of gate and globe valves

GK 10.2 – GK 40.2

GST 10.1 – GST 40.1

Technical data■ Spur gearboxes

for use in nuclear power plants

inside/outside containment

in accordance with IEEE 382-1996

GSTI 25.1 – GSTI 40.1

■ Furthermore, there are dimension sheets available.

The latest issues of all documentation can be downloaded

as PDF files from www.auma.com.

| 17

Index

A

Ambient temperatures 9

C

CE mark 13

Certificates 13

Colour 9

Corrosion protection 9

E

Enclosure protection IP 9

EU directives 13

F

Functional test 13

H

Housing 7

L

Lifetime 8

Literature 16

M

Multi-turn actuator 7

O

OBE (Operating Basis Earthquake) 8

Output drive type 11

P

Painting 9

Plug sleeve 11

Q

Qualification 8

R

Radiation 8

S

Screw plug 7

Spur gear 7

SSE (Safe Shutdown Earthquake) 8

Stem protection tube 5

T

Temperatures 8 - 9

V

Valve attachment 7,11

Vibrations 8

18 |

AUMA worldwide

EuropeAUMA Riester GmbH & Co. KGPlant MüllheimDE-79373 MüllheimTel +49 7631 809 - 0riester@auma.comwww.auma.comPlant Ostfildern-NellingenDE-73747 OstfildernTel +49 711 34803 - 0riester@wof.auma.comService Center CologneDE-50858 KölnTel +49 2234 2037 - 9000Service@sck.auma.comService Center MagdeburgDE-39167 NiederndodelebenTel +49 39204 759 - 0Service@scm.auma.comService Center BavariaDE-85386 EchingTel +49 81 65 9017- 0Riester@scb.auma.com

AUMA Armaturenantriebe GmbHAT-2512 TribuswinkelTel +43 2252 82540office@auma.atwww.auma.at

AUMA (Schweiz) AGCH-8965 BerikonTel +41 566 400945RettichP.ch@auma.com

AUMA Servopohony spol. s.r.o.CZ-250 01 Brandýs n.L.-St.BoleslavTel +420 326 396 993auma-s@auma.czwww.auma.cz

OY AUMATOR ABFI-02230 EspooTel +358 9 5840 22auma@aumator.fiwww.aumator.fi

AUMA France S.A.R.L.FR-95157 Taverny CedexTel +33 1 39327272info@auma.frwww.auma.fr

AUMA ACTUATORS Ltd.GB- Clevedon North Somerset BS21 6THTel +44 1275 871141mail@auma.co.ukwww.auma.co.uk

AUMA ITALIANA S.r.l. a socio unicoIT-20023 Cerro Maggiore (MI)Tel +39 0331 51351info@auma.itwww.auma.it

AUMA BENELUX B.V.NL-2314 XT LeidenTel +31 71 581 40 40office@benelux.auma.comwww.auma.nl

AUMA Polska Sp. z o.o.PL-41-219 SosnowiecTel +48 32 783 52 00biuro@auma.com.plwww.auma.com.pl

OOO PRIWODY AUMARU-141400 Khimki, Moscow regionTel +7 495 221 64 28aumarussia@auma.ruwww.auma.ru

ERICHS ARMATUR ABSE-20039 MalmöTel +46 40 311550info@erichsarmatur.sewww.erichsarmatur.se

GRØNBECH & SØNNER A/SDK-2450 København SVTel +45 33 26 63 00GS@g-s.dkwww.g-s.dk

IBEROPLAN S.A.ES-28027 MadridTel +34 91 3717130iberoplan@iberoplan.com

D. G. Bellos & Co. O.E.GR-13673 Acharnai AthensTel +30 210 2409485info@dgbellos.gr

SIGURD SØRUM A. S.NO-1300 SandvikaTel +47 67572600post@sigurd-sorum.no

INDUSTRAPT-2710-297 SintraTel +351 2 1910 95 00industra@tyco-valves.com

MEGA Endüstri Kontrol Sistemieri Tic. Ltd. Sti.TR-06810 AnkaraTel +90 312 217 32 88megaendustri@megaendustri.com.trwww.megaendustri.com.tr

AfricaAUMA South Africa (Pty) Ltd.ZA-1560 SpringsTel +27 11 3632880aumasa@mweb.co.za

Solution Technique Contrôle CommandeDZ- Bir Mourad Rais AlgiersTel +213 21 56 42 09/18stcco@wissal.dz

A.T.E.C.EG- CairoTel +20 2 23599680 - 23590861atec@intouch.com

| 19

AmericaAUMA Automação do Brazil ltda.BR- Sao PauloTel +55 11 4612-3477contato@auma-br.com

AUMA ACTUATORS INC.US-PA 15317 CanonsburgTel +1 724-743-AUMA (2862)mailbox@auma-usa.comwww.auma-usa.com

AUMA Chile Representative OfficeCL-9500414 BuinTel +56 2 821 4108aumachile@adsl.tie.cl

LOOP S. A.AR-C1140ABP Buenos AiresTel +54 11 4307 2141contacto@loopsa.com.ar

TROY-ONTOR Inc.CA-L4N 8X1 Barrie OntarioTel +1 705 721-8246troy-ontor@troy-ontor.ca

Ferrostaal de Colombia Ltda.CO- Bogotá D.C.Tel +57 1 401 1300dorian.hernandez@ferrostaal.comwww.ferrostaal.com

PROCONTIC Procesos y Control AutomáticoEC- QuitoTel +593 2 292 0431info@procontic.com.ec

Corsusa International S.A.C.PE- Miralflores - LimaTel +511444-1200 / 0044 / 2321corsusa@corsusa.comwww.corsusa.com

PASSCO Inc.PR-00936-4153 San JuanTel +1 787 620-8785jgarcia@passcoinc.net

SuplibarcaVE- Maracaibo Estado, ZuliaTel +58 261 7 555 667suplibarca@intercable.net.ve

AsiaAUMA Actuators Middle East W.L.L.BH-Salmabad 704Tel + 97 3 17896585Naveen.Shetty@auma.com

AUMA Actuators (Tianjin) Co., Ltd.CN-300457 TianjinTel +86 22 6625 1310mailbox@auma-china.comwww.auma-china.com

AUMA (INDIA) PRIVATE LIMITEDIN-560 058 BangaloreTel +91 80 2839 4656info@auma.co.inwww.auma.co.in

AUMA JAPAN Co., Ltd.JP-210-0848 Kawasaki-ku,Kawasaki-shi KanagawaTel +81 44 329 1061mailbox@auma.co.jpwww.auma.co.jp

AUMA ACTUATORS (Singapore) Pte Ltd.SG-569551 SingaporeTel +65 6 4818750sales@auma.com.sgwww.auma.com.sg

Al Ayman Industrial. EqptsAE- DubaiTel +971 4 3682720auma@emirates.net.ae

PERFECT CONTROLS Ltd.HK- Tsuen Wan, KowloonTel +852 2493 7726joeip@perfectcontrols.com.hk

DW Controls Co., Ltd.KR-153-702 Gasan-dong,GeumChun-Gu, SeoulTel +82 2 2624 3400import@actuatorbank.comwww.actuatorbank.com

Al-Arfaj Engineering Co WLLKW-22004 SalmiyahTel +965-24817448info@arfajengg.comwww.arfajengg.com

Petrogulf W.L.LQA- DohaTel +974 4350 151pgulf@qatar.net.qa

Sunny Valves and Intertrade Corp. Ltd.TH-10120 Yannawa BangkokTel +66 2 2400656sunnyvalves@inet.co.thwww.sunnyvalves.co.th/

Top Advance Enterprises Ltd.TW- Jhonghe City Taipei Hsien (235)Tel +886 2 2225 1718support@auma-taiwan.com.twwww.auma-taiwan.com.tw

AustraliaBARRON GJM Pty. Ltd.AU-NSW 1570 ArtarmonTel +61 294361088info@barron.com.auwww.barron.com.au

AUMA Riester GmbH & Co. KG

[1] [2] [3]

[4] [5]

[6] [7] [8]

[1] Multi-turn actuatorsSA 07.2 – SA 16.2/SA 25.1 – SA 48.1Torques from 10 to 32,000 NmOutput speeds from 4 to 180 rpm

[2] Multi-turn actuators SA/SARwith controls AUMATICTorques from 10 to 1,000 NmOutput speeds from 4 to 180 rpm

[3] Linear actuators SA/LECombination of multi-turn actuator SAwith linear thrust unit LEThrusts from4 kN to 217 kNStrokes up to 500 mmLinear speedsfrom 20 to 360 mm/min

[4] Part-turn actuatorsSG 05.1 – SG 12.1Torques from 100 to 1,200 NmOperating times for 90° from 4 to 180 s

[5] Part-turn actuators SA/GSCombination of multi-turn actuator SA withpart-turn gearbox GSTorques up to 675,000 Nm

[6] Bevel gearboxesGK 10.2 – GK 40.2Torques up to 16,000 Nm

[7] Spur gearboxesGST 10.1 – GST 40.1Torques up to 16,000 Nm

[8] Worm gearboxes with base and leverGF 50.3 – GF 250.3Torques up to 32,000 Nm

Subject to change without notice.The product features and technical data provided do not express or imply any warranty.Y004.418/002/en/1.10Certificate Registration No.

12 100/104 4269

P.O.Box 1362

D-79379 Muellheim

Tel +49 7631-809-0

Fax +49 7631-809-1250

riester@auma.com

For detailed information about AUMA products refer to the Internet: www.auma.com