Multiple Variety of Electric Screwdriver

Method for changing the bit with an Electric Screwdriver :

As the most common industrial quality gadget in business assembly, the screwdriver bit is a loss gadget. Because it has been rubbed with the screw, it requires to be changed after a period of use.

There are 5 actions, the actions are as follows:

• Prepare one Electric Screwdriver as well as one φ4 bit. 4 indicates the manager of the batch head is a 4mm outer round handle.

• Push down the shaft cap of the Electric Screwdriver with the female finger, to make sure that the steel round of the card starter recovers and the shaft core leakages out.

• Put the screwdriver head down on the card positioning and also launch the shaft cap.

• Draw the puller to evaluate whether it is installed in place.

• Make certain to install the OKAY and after that power on the Electric Screwdriverto lock the screw.

Contact UsAddress: 709-710, GD-ITL Towers, B-8, Netaji Subhash Place,

Pitampura, New Delhi, India

Email: ajay@advinancetech.co.in

Phone:9599592692

Website : http://www.advancetech.co.in