+ All Categories
Home > Documents > Nanoled Stainless steel · 2019. 7. 1. · We recommend the useof 2 luminaires to illuminate...

Nanoled Stainless steel · 2019. 7. 1. · We recommend the useof 2 luminaires to illuminate...

Date post: 30-Jul-2021
Category:
Upload: others
View: 1 times
Download: 0 times
Share this document with a friend
10
92
Transcript
Page 1: Nanoled Stainless steel · 2019. 7. 1. · We recommend the useof 2 luminaires to illuminate properly the entire opening (see photo below)

92

Page 2: Nanoled Stainless steel · 2019. 7. 1. · We recommend the useof 2 luminaires to illuminate properly the entire opening (see photo below)

www.simes.it/nanoled

Ø 45mmØ 30mm Ø 60mm Ø 85mm

Ø 85mm

Ø 60mm

Ø 45mm

Ø 85mmØ 60mm

93

Nanoled Stainless steelWalk-over, wall recessed and downlight

Wall recessed

Walk-over

Downlight

Nanoled Stainless steel is a walk-over in-ground, wall recessed and ceiling luminaire providing either well defined accent lighting or evocative markers. The main feature of this in-ground luminaire is its extremely reduced dimensions (from 30mm to 85mm diameter versions). The lighting body is completely manufactured in 316L stainless steel to ensure an, increased corrosion resistance and has no visible screws. Reduced energy consumption and very high lighting performances accomplish the profile of this extraordinary recessed spotlight for the exterior.

Page 3: Nanoled Stainless steel · 2019. 7. 1. · We recommend the useof 2 luminaires to illuminate properly the entire opening (see photo below)

Bagers Bro - Malmö, Sweden © Lokal XXX Arkitekter, Fagerhult AB, ph. Björn Tegnell

94

Body made of AISI 316L monoblock stainless steel. Toughened trasparent or acid-etched glass.Luminaire hard wired with neoprene cable 5m with cable gland.Absence of screws (the luminaire is fixed to the recessing box with O-rings).Recessing box in polypropylene (walkover and wall recessed versions).

Maximum weight 500 Kg

Stainless steel (code 19)

Finishing:

NANOLED STAINLESS STEEL Walk-over

For the latest technical information and luminaire updates with LED technology please refer to www.simes.it

Protection class IP65 / IP67

Isolation class

CLASS III

Mechanical resistanceIK 08

Power supply not included.

Page 4: Nanoled Stainless steel · 2019. 7. 1. · We recommend the useof 2 luminaires to illuminate properly the entire opening (see photo below)

h(m) E(lx) 3000K E(lx) 4000K2.5 0.0 88° 0.0 88°2.0 0.0 0.01.5 0.0 0.01.0 0.5 0.50.5 1.5 2.0

0.1 m 0(m) 0(m)

h(m) E(lx) 3000K E(lx) 4000K5.0 0.0 9° 0.0 9°4.0 0.0 0.03.0 0.5 0.52.0 1.5 2.01.0 10.0 11.0

0.1 m 0(m) 0(m)

h(m) E(lx) 3000K E(lx) 4000K2.5 0.0 29° 0.0 29°2.0 0.0 0.01.5 0.5 0.51.0 2.5 3.00.5 16.0 18.0

0.1 m 0(m) 0(m)

88°

29°

Ø 30

125

Ø 125

h(m) E(lx) 3000K E(lx) 4000K2.5 0.0 88° 0.0 88°2.0 0.0 0.01.5 0.0 0.01.0 0.5 0.50.5 3.0 3.5

0.1 m 0(m) 0(m)

h(m) E(lx) 3000K E(lx) 4000K5.0 0.0 9° 0.0 9°4.0 0.5 0.53.0 1.0 1.02.0 3.0 3.51.0 19.0 20.0

0.1 m 0(m) 0(m)

h(m) E(lx) 3000K E(lx) 4000K2.5 0.0 29° 0.0 29°2.0 0.5 0.51.5 1.0 1.01.0 4.0 4.50.5 28.0 30.0

0.1 m 0(m) 0(m)

29°

88°

Ø 45

125

Ø 125

95

Acid - Etched Glass

Lens

NANOLED STAINLESS STEEL Walk-over Ø 30 mm

1 HIGH-POWER LED 3000K CRI90 31lm

1 HIGH-POWER LED 4000K CRI90 34lm

Computer-simulated photometricsRated input power 0,5W 24V DCRequire constant voltage remote power supply (page 468-469)

1 HIGH-POWER LED 3000K CRI90 31lm

1 HIGH-POWER LED 4000K CRI90 34lm

Computer-simulated photometricsRated input power 0,5W 24V DCRequire constant voltage remote power supply (page 468-469)

1 HIGH-POWER LED 3000K CRI90 31lm

1 HIGH-POWER LED 4000K CRI90 34lm

Computer-simulated photometricsRated input power 0,5W 24V DCRequire constant voltage remote power supply

Acid - Etched Glass

Lens

NANOLED STAINLESS STEEL Walk-over Ø 45 mm

1 HIGH-POWER LED 3000K CRI90 62lm

1 HIGH-POWER LED 4000K CRI90 68lm

Computer-simulated photometricsRated input power 1W 24V DCRequire constant voltage remote power supply (page 468-469)

1 HIGH-POWER LED 3000K CRI90 62lm

1 HIGH-POWER LED 4000K CRI90 68lm

Computer-simulated photometricsRated input power 1W 24V DCRequire constant voltage remote power supply (page 468-469)

1 HIGH-POWER LED 3000K CRI90 62lm

1 HIGH-POWER LED 4000K CRI90 68lm

Computer-simulated photometricsRated input power 1W 24V DCRequire constant voltage remote power supply

S.3301W.19

S.3301N.19

S.3306W.19

S.3306N.19

S.3305W.19

S.3305N.19

T 40°C

S.3330W.19

S.3330N.19

S.3364W.19

S.3364N.19

S.3340W.19

S.3340N.19

T 40°C

Page 5: Nanoled Stainless steel · 2019. 7. 1. · We recommend the useof 2 luminaires to illuminate properly the entire opening (see photo below)

h(m) E(lx) 3000K E(lx) 4000K2.5 0.0 88° 0.0 88°2.0 0.0 0.01.5 0.0 0.01.0 1.0 1.00.5 6.0 6.5

0.1 m 0(m) 0(m)

h(m) E(lx) 3000K E(lx) 4000K5.0 0.5 9° 0.5 9°4.0 1.0 1.03.0 2.0 2.52.0 6.0 7.01.0 36.0 40.0

0.1 m 0(m) 0(m)

h(m) E(lx) 3000K E(lx) 4000K2.5 0.5 29° 0.5 29°2.0 1.0 1.01.5 2.0 2.51.0 8.0 9.00.5 55.0 61.0

0.1 m 0(m) 0(m)

29°

88°

Ø 60

125

Ø 125

h(m) E(lx) 3000K E(lx) 4000K2.5 0.0 88° 0.0 88°2.0 0.0 0.01.5 0.5 0.51.0 1.5 2.00.5 13.0 14.0

0.1 m 0(m) 0(m)

h(m) E(lx) 3000K E(lx) 4000K5.0 1.5 9° 2.0 9°4.0 3.0 4.03.0 7.0 8.02.0 19.0 21.01.0 76.0 87.0

0.1 m 0(m) 0(m)

h(m) E(lx) 3000K E(lx) 4000K2.5 2.0 29° 2.5 29°2.0 4.0 4.51.5 9.0 10.01.0 32.0 34.00.5 168.0 185.0

0.1 m 0(m) 0(m)

h(m) E(lx) 3000K E(lx) 4000K2.5 1.5 34° 2.0 34°2.0 3.0 4.01.5 7.5 8.01.0 27.0 30.00.5 218.0 233.0

0.1 m 0(m) 0(m)

29°

34°

88°

Ø 85

125

Ø 125

96

Acid - Etched Glass

Lens

NANOLED STAINLESS STEEL Walk-over Ø 60 mm

1 HIGH-POWER LED 3000K CRI90 115lm

1 HIGH-POWER LED 4000K CRI90 127lm

Computer-simulated photometricsRated input power 2,2W 24V DCRequire constant voltage remote power supply (page 468-469)

1 HIGH-POWER LED 3000K CRI90 115lm

1 HIGH-POWER LED 4000K CRI90 127lm

Computer-simulated photometricsRated input power 2,2W 24V DCRequire constant voltage remote power supply (page 468-469)

1 HIGH-POWER LED 3000K CRI90 115lm

1 HIGH-POWER LED 4000K CRI90 127lm

Acid - Etched Glass

NANOLED STAINLESS STEEL Walk-over Ø 85 mm

1 HIGH-POWER LED 3000K CRI90 257lm

1 HIGH-POWER LED 4000K CRI90 283lm

Computer-simulated photometricsRated input power 4,5W 24V DCRequire constant voltage remote power supply

1 HIGH-POWER LED 3000K CRI90 257lm

1 HIGH-POWER LED 4000K CRI90 283lm

Computer-simulated photometricsRated input power 4,5W 24V DCRequire constant voltage remote power supply (page 468-469)

1 COB LED 3000K CRI90 350lm

1 COB LED 4000K CRI90 375lm

Rated input power 3,0W 24V DCRequire constant voltage remote power supply (page 468-469)

1 HIGH-POWER LED 3000K CRI90 257lm

1 HIGH-POWER LED 4000K CRI90 283lm

Lens

Reflector

S.3300W.19

S.3300N.19

S.3384W.19

S.3384N.19

S.3310W.19

S.3310N.19

T 40°C

S.3311W.19

S.3311N.19

S.3313W.19

S.3313N.19

S.3315W.19

S.3315N.19

S.3312W.19

S.3312N.19

T 40°C

Page 6: Nanoled Stainless steel · 2019. 7. 1. · We recommend the useof 2 luminaires to illuminate properly the entire opening (see photo below)

Ø 85

125

Ø 125

90°x6° 90°x6°

Walk over round Ø 85 mmBlade of light

1 HIGH-POWER LED 3000K CRI80 228lm

1 HIGH-POWER LED 4000K CRI80 238lm

Computer-simulated photometricsRated input power 2,5W 24V DCWith radial lens 90°x6°Requires a remote constant voltage driver (page 468-469)

NANOLED STAINLESS STEEL Walk-over Blade of light Ø 85 mm

We recommend the use of 2 luminaires to illuminate properly the entire opening (see photo below)

S.3316W.19

S.3316N.19

T 40°C

Page 7: Nanoled Stainless steel · 2019. 7. 1. · We recommend the useof 2 luminaires to illuminate properly the entire opening (see photo below)

Galerie Teplice, Czech Republic © EXX s.r.o. Praha, ph. Petr Janžura

98

Body made of AISI 316L monoblock stainless steel. Toughened trasparent with asimmetric comfort reflector with black painted finishing.Luminaire hard wired with neoprene cable 5m with cable gland.Absence of screws (the luminaire is fixed to the recessing box with O-rings).Recessing box in polypropylene.

Maximum weight 500 Kg

Stainless steel (code 19)

Finishing:

NANOLED STAINLESS STEEL Wall recessed

For the latest technical information and luminaire updates with LED technology please refer to www.simes.it

Protection class IP65

Isolation class

CLASS III

Mechanical resistanceIK 08

Power supply not included.

Page 8: Nanoled Stainless steel · 2019. 7. 1. · We recommend the useof 2 luminaires to illuminate properly the entire opening (see photo below)

C0 18°+19° C90 32°

=32°

Ø 4

5

95

Ø 32

luxH=0.2 m 3000K

4000K

C0 18°+19° C90 32°

=32°

luxH=0.2 m 3000K

4000K

Ø 6

0

110

Ø 32

C0 18°+19° C90 32°

=32°

Ø 8

5

125

Ø 32

luxH=0.2 m 3000K

4000K

99

NANOLED STAINLESS STEEL Wall recessed

Wall recessed Ø 45 mm

1 HIGH-POWER LED 3000K CRI90 62lm

1 HIGH-POWER LED 4000K CRI90 68lm

Computer-simulated photometricsRated input power 1W 24V DCRequire constant voltage remote power supply (page 468-469)

Wall recessed Ø 60 mm

1 HIGH-POWER LED 3000K CRI90 115lm

1 HIGH-POWER LED 4000K CRI90 127lm

Computer-simulated photometricsRated input power 2,2W 24V DCRequire constant voltage remote power supply (page 468-469)

Wall Recessed Ø 85 mm

1 HIGH-POWER LED 3000K CRI90 257lm

1 HIGH-POWER LED 4000K CRI90 283lm

Computer-simulated photometricsRated input power 4,5W 24V DCRequire constant voltage remote power supply (page 468-469)

S.3354W.19

S.3354N.19

S.3374W.19

S.3374N.19

S.3317W.19

S.3317N.19

Page 9: Nanoled Stainless steel · 2019. 7. 1. · We recommend the useof 2 luminaires to illuminate properly the entire opening (see photo below)

“Therasia Resort Sea & SPA”, Vulcano island, Italy © Simes

100

Body made of AISI 316L monoblock stainless steel. Toughened trasparent or acid-etched glass.Luminaire hard wired with neoprene cable 5m with cable gland.Supplied with two clips which allow for easy installation in plasterboard ceilings, thickness must be 15÷30mm (downlight versions).

Maximum weight 500 Kg

Stainless steel (code 19)

Finishing:

NANOLED STAINLESS STEEL Downlight

For the latest technical information and luminaire updates with LED technology please refer to www.simes.it

Protection class IP65

Isolation class

CLASS III

Mechanical resistanceIK 08

Power supply not included.

Page 10: Nanoled Stainless steel · 2019. 7. 1. · We recommend the useof 2 luminaires to illuminate properly the entire opening (see photo below)

29° 3000K 4000K h(m) Ø(m) E(lx) E(lx)

0.4 0.20 1153 1574 0.8 0.41 288 393 1.2 0.61 128 175 1.6 0.82 72 98 2.0 1.02 46 63

Ø 60

85

15÷

30

Ø 50

34°

29°

34° 3000K 4000K h(m) Ø(m) E(lx) E(lx)

0.4 0.25 4018 4299 0.8 0.49 1004 1075 1.2 0.74 446 478 1.6 0.98 251 269 2.0 1.23 161 172

Ø 85

85

15÷

30

Ø 60

101

NANOLED STAINLESS STEEL Dowlight

Ø 60 mm - Lens

1 HIGH-POWER LED 3000K CRI90 115lm

1 HIGH-POWER LED 4000K CRI90 127lm

Computer-simulated photometricsRated input power 2W 24V DCRequire constant voltage remote power supply (page 468-469)

1 COB LED 3000K CRI90 350lm

1 COB LED 4000K CRI90 375lm

Rated input power 3,0W 24V DCRequire constant voltage remote power supply (page 468-469)

Ø 85 mm - Reflector

S.3321W.19

S.3321N.19

S.3319W.19

S.3319N.19


Recommended