www.terrawave.com
TerraWave Solutions is a Cisco Solution Technology Integrator
Cisco Systems, Inc. and TerraWave Solutions
NEMA Enclosure Solutions for Cisco WLAN Deployments
Product Catalog
TABLE OF CONTENTS
Cisco Solutions, Inc. and TerraWave Solutions NEMA Enclosure Solutions for Cisco WLAN Deployments Product Catalog
About TerraWave Solutions and the Cisco Solutions Technology Agreement Page 17
Overview Page 2
(210) 375-8482 - www.terrawave.com Page 1
Enclosure Solutions for the Cisco Access Point 1231 Page 3 XHC1231 16x12x8 Heated/Cooled Enclosure—Includes the Cisco AP1231
TWSW1231 12x10x6 Steel Enclosure with a Window—Includes the Cisco AP1231 XSD1231 12x10x6 Steel Enclosure with Solid Door—Includes the Cisco AP1231 XPC1231 12x10x6 Polycarbonate Enclosure with a Clear Door—Includes the Cisco AP1231 XPS1231 12x10x6 Polycarbonate Enclosure with a Solid Door—Includes the Cisco AP1231 XSS1231 12x10x6 Stainless Steel Enclosure with a Solid Door—Includes the Cisco AP1231 XFW1231 12x10x6 Fiberglass Enclosure with a Window—Includes the Cisco AP1231
10x10x3.5 Steel Lockbox Enclosure with a Window and Lock—Includes the Cisco AP1231
XCT1231 Ceiling Tile Enclosure—Includes the Cisco AP1231
Enclosure Solutions for the Cisco Access Point 1232 Page 9 XHC1232 16x12x8 Heated/Cooled Enclosure—Includes the AP1232 XSW1232 12x10x6 Steel Enclosure with a Window—Includes the Cisco AP1232 XSD1232 12x10x6 Steel Enclosure with Solid Door—Includes the Cisco AP1232 XPC1232 12x10x6 Polycarbonate Enclosure with a Clear Door—Includes the Cisco AP1232 XPS1232 12x10x6 Polycarbonate Enclosure with a Solid Door—Includes the Cisco AP1232 XSS1232 12x10x6 Stainless Steel Enclosure with a Solid Door—Includes the Cisco AP1232 XFW1232 12x10x6 Fiberglass Enclosure with a Window—Includes the Cisco AP1232 XCT1232 Ceiling Tile Enclosure—Includes the Cisco AP1232
Enclosure Solutions for the Cisco Access Point 1131 Page 14 XPC1131 12x10x6 Polycarbonate Enclosure with a Clear Door—Includes the Cisco AP1131 XPS1131 12x10x6 Polycarbonate Enclosure with a Solid Door—Includes the Cisco AP1131
Enclosure Solutions for the Cisco Wireless Bridge 1310 Page 15
XPC1310 12x10x6 Polycarbonate Enclosure with a Clear Door and Vents—Includes the Cisco BR1310
XPS1310 12x10x6 Polycarbonate Enclosure with a Solid Door and Vents—Includes the Cisco BR1310
Please note that each enclosure solution is delivered with its select Cisco AP or bridge.
Enclosure Solutions for the Cisco Access Point 1242 Page 16
TerraWave Enclosure Solutions for Cisco Wireless Products
Overview
NEMA rated enclosures are commonly used in harsh environments or to protect wireless LAN equipment from tampering or theft. TerraWave’s custom NEMA solutions make it easy to mount and protect Cisco wireless products in most every vertical market. From basic to completely customized, TerraWave offers NEMA accessories for any Cisco wireless application. Select from more than twenty Cisco approved NEMA solutions, each delivered complete with a select Cisco Aironet® access point. TerraWave offers enclosure solutions in a number of different materials to address specific application needs. Enclosures are available with accessories including mounting solutions, locks, screw down covers and heating and cooling elements to meet the specifications of any Cisco wireless deployment.
Features and Benefits:
• Custom made for Cisco wireless products
• Cisco approved solutions
• Protects RF equipment from elements, theft and tampering
• Available in a variety of NEMA ratings
• A variety of custom options including heating and cooling elements
• Seams continuously welded and ground smooth
• Large opening simplifies component installation, maintenance or conversion
• Fastening holes on back of unit for direct Mounting
• Furnished hardware kit includes panel mounting screws and grounding hardware
• Diversity connections are included with all enclosures
• Additional accessories such as a thermostat, fan or heating unit are optional
• Create new deployment opportunities
• Excellent value. Superior performance at a competitive price
Customized Options
Polycarbonate Plastic Fiberglass Assembly Steel Assembly Stainless Steel Assembly
Thermostat Lightning Protection Power Source Antenna Splitter
Cooling Fan Heater External Mounts Key Lock
(210) 375-8482 - www.terrawave.com Page 2
www.terrawave.com
www.terrawave.com
Cisco 1231 AP—With simultaneous support for both 2.4 GHz and 5 GHz radios, the Cisco Aironet 1200 Series preserves existing IEEE 802.11b investments and provides a migration path to future IEEE 802.11a and IEEE 802.11g technologies. Its modular design supports single and dual-band configuration, plus the field upgradability to change these configurations as requirements change and technologies evolve.
TWSW1231 12x10x6 Steel Enclosure with Window
XHC1231 16x12x8 Heated/Cooled
Enclosure
XFW1231 12x10x6 Fiberglass Enclosure
with Window
XCT1231 Ceiling Tile Enclosure
XLB1231 10x10x3.5 Steel Enclosure with Window and Key Lock
XSS1231 12x10x6 Stainless Steel Enclosure
with Solid Door
(210) 375-8482 - www.terrawave.com Page 3
XPC1231 12x10x6 Polycarbonate Enclosure
with Clear Door
XPS1231 12x10x6 Polycarbonate Enclosure
with Solid Door
XSD1231 12x10x6 Steel Enclosure
with Solid Door
See the following pages for information on each NEMA solution
Enclosure Solutions for the Cisco 1231 Access Point (802.11 b/g)
Construction: - 1.4mm (16 gauge) steel - Seams continuously welded and ground smooth - Body flange trough prevents liquids and contaminants from entering the enclosure - Seamless foam-in-place gasket provides oil-tight and dust-tight seal against contaminants - Self-grounding latch system with double seal provides maximum protection against leakage
Finish: - Textured light gray polyester powder paint inside and out over phosphatized surfaces
Included Components: - Cisco AP1231 - 16”x12”x8” Heated/Cooled Enclosure for the AP1231 - Bulkhead Extender - RPTNC Right Angle Plug to RPTNC Bulkhead Jack
Construction: - 1.4 mm (16 gauge) steel - Seams continuously welded and ground smooth - Body flange trough prevents liquids and contaminants from entering enclosure opening - Large opening simplifies component installation, maintenance or conversion - Seamless foam-in-place gasket provides oil-tight and dust-tight seal against contaminants - M6 base flange grounding stud on body - M6 base flange bonding provision on cover or door Finish: - Textured light gray polyester powder paint covers inside and out over phosphatized surfaces. Included Components: - Cisco AP1231 - 12”x10”x6” Steel Enclosure with a Window for the AP1231 - Bulkhead Extender - RPTNC Plug to RPTNC Jack
www.terrawave.com
Enclosure Solutions for the Cisco 1231 Access Point (802.11 b/g)
For questions on this and other Wi-Fi solutions, contact a TerraWave account manager. (210) 375-8482 - www.terrawave.com Page 4
XHC1231 16”x12”x8” Heated/Cooled Enclosure—Includes the Cisco 1231 Access Point
The IP54 steel enclosure is perfect for indoor or outdoor use and protects the Cisco 1231 access point from the elements, theft or damage. The heated/cooled element is perfect for enabling 802.11 networks in harsh environments.
XSW1231 12”x10”x6” Steel Enclosure with a Window—Includes the Cisco 1231 Access Point
The NEMA 12 steel enclosure is perfect for indoor or outdoor use to help protect the Cisco 1231 access point from the elements, theft or damage. This enclosure, made of steel, is extremely durable and rugged. The window provides a clear view of the AP and indicator lights.
www.terrawave.com
Enclosure Solutions for the Cisco 1231 Access Point (802.11 b/g)
XSD1231 12”x10”x6” Steel Enclosure with a Solid Door—Includes the Cisco 1231 Access Point
The NEMA 12 steel enclosure is perfect for indoor or outdoor use to help protect the Cisco 1231 access point from the elements, theft or damage. This enclosure, made of steel, is extremely durable and rugged.
Construction: - 1.4 mm (16 gauge) steel - Seams continuously welded and ground smooth - Body flange trough prevents liquids and contaminants from entering enclosure opening - Large perimeter opening facilitates component installation, maintenance or conversion - Seamless foam-in-place gasket provides oil-tight and dust-tight seal against contaminants - M6 base flange grounding stud on body - M6 base flange bonding provision on cover or door
Finish: - Textured light gray polyester powder paint covers inside and out over phosphatized surfaces.
Included Components: - Cisco AP1231 - 12”x10”x6” Steel Enclosure with a Window for the AP1231 - Bulkhead Extender - RPTNC Plug to RPTNC Jack
XPC1231 12”x10”x6” Polycarbonate Enclosure with a Clear Door—Includes the Cisco 1231 Access Point
The 12”x10”x6” thermoplastic, NEMA 4X rated enclosure is designed for outdoor or indoor use to protect the Cisco 1231 AP. This enclosure, made from polycarbonate material is durable, extremely affordable and is the lightest weight enclosure solution TerraWave offers. The clear door provides an unobstructed view of the AP and indicator lights.
Features: - Constructed of thermoplastic material - UL Listed - Closes with stainless steel latches - Solid opaque covers - Color is light gray with a gloss finish Included Components: - Cisco AP1231 - 12”x10”x6” Polycarbonate Enclosure with a Clear Door for the AP 1231 - Bulkhead Extender—RPTNC Plug to RPTNC Jack
For questions on this and other Wi-Fi solutions, contact a TerraWave account manager. (210) 375-8482 - www.terrawave.com Page 5
www.terrawave.com
Enclosure Solutions for the Cisco 1231 Access Point (802.11 b/g)
Features: - Constructed of thermoplastic material - UL Listed - Closes with stainless steel latches - Solid opaque covers - Color is light gray with a gloss finish Included Components: - Cisco AP1231 - 12”x10”x6” Polycarbonate Enclosure with a Solid Door for the AP 1231 - Bulkhead Extender—RPTNC Plug to RPTNC Jack
XSS1231 12”x10”x6” Stainless Steel Enclosure with a Solid Door—Includes the Cisco 1231 Access Point
The NEMA 4X stainless steel enclosure is intended for outdoor use to protect the Cisco 1231 AP from corrosion, dust, rain, extreme temperatures and unauthorized access or inadvertent contact with the controls and wiring located inside the enclosure. This enclosure, made of stainless steel, is extremely durable and rugged.
Construction: - 1.4 mm (16 gauge) steel - Seams continuously welded and ground smooth - Body flange trough prevents liquids and contaminants from entering enclosure opening - Large perimeter opening facilitates component installation, maintenance or conversion - Seamless foam-in-place gasket provides oil-tight and dust-tight seal against contaminants - M6 base flange grounding stud on body - M6 base flange bonding provision on cover or door Finish: Enclosure is not painted. Cover and body have a smooth brushed finish. Included Components: - Cisco AP 1231 - 12”x10”x6” Stainless Steel Enclosure with a Solid Door for the AP 1231 - Bulkhead Extender—RPTNC Plug to RPTNC Jack
For questions on this and other Wi-Fi solutions, contact a TerraWave account manager. (210) 375-8482 - www.terrawave.com Page 6
XPS1231 12”x10”x6” Polycarbonate Enclosure with a Solid Door—Includes the Cisco 1231 Access Point
The 12”x10”x6” thermoplastic, NEMA 4X rated enclosure is intended for outdoor or indoor use to protect the Cisco 1231 AP. This enclosure, made from polycarbonate material, is durable, extremely affordable and is the lightest weight enclosure solution TerraWave offers.
www.terrawave.com
Enclosure Solutions for the Cisco 1231 Access Point (802.11 b/g)
Construction: - Made from corrosion-resistant hot compression molded fiberglass reinforced polyester - Windows are clear polycarbonate - Capable of withstanding continuous temperatures from -58°F up to 302°F
Finish: Textured light gray polyester powder paint covers enclosure inside and out.
Included Components: - Cisco AP 1231 - 12”x10”x8” Fiberglass Enclosure with a Window for the Cisco AP 1231 - Bulkhead Extender—RPTNC Plug to RPTNC Jack
XLB1231 10”x10”x3.5” Steel Enclosure with a Window and Lock—Includes the Cisco 1231 Access Point
The NEMA 1 rated enclosure is designed for indoor use to provide protection for the Cisco 1231 AP against theft or tampering or falling debris. This enclosure, made of steel, is extremely durable and rugged.
Construction: - Made from 16 gauge steel - Butt hinges - Mounting holes on back of enclosure - Window is clear polycarbonate - Key lock
Finish: - Textured off white polyester powder paint covers enclosure inside and out
Included Components: - Cisco AP 1231 - 10”x10”x3.5” Steel Enclosure with a Window and Lock for the Cisco AP 1231 - Bulkhead Extender—RPTNC Plug to RPTNC Jack
XFW1231 12”x10”x6” Fiberglass Enclosure with a Window—Includes the Cisco 1231 Access Point
The NEMA 4X fiberglass enclosure is intended for outdoor use to protect the Cisco 1231 AP from corrosion, dust, rain, extreme temperatures and unauthorized access or inadvertent contact with the controls and wiring located inside the enclosure. This fiberglass enclosure provides both a durable and lightweight solution. The window offers a clear view of the AP and indicator lights.
For questions on this and other Wi-Fi solutions, contact a TerraWave account manager. (210) 375-8482 - www.terrawave.com Page 7
TerraWave's Ceiling Tile Enclosure contains and protects the Cisco 1231 AP in an aesthetically pleasing and stealthy solution within a suspended ceiling. Suspended in a similar manner as the ceiling tile grid, this smart solution is suspended by wire to the roof structure. Required hardware is provided to hold the weight of this enclosure.
Installation requires cutting an existing ceiling tile from its original 2’ x 4’ size to 2’ x 3’. A two inch section of ceiling tile grid is provided to dress the installation. Antennas are mounted with no exposed cable. Once installed, the AP is protected and hidden from view, in a solution that is flush with the ceiling tile.
XCT1231 Ceiling Tile Enclosure—Includes the Cisco 1231 Access Point
For questions on this and other Wi-Fi solutions, contact a TerraWave account manager. (210) 375-8482 - www.terrawave.com Page 8
www.terrawave.com
Enclosure Solutions for the Cisco 1231 Access Point (802.11 b/g)
Cisco 1232 AP— With simultaneous support for both 2.4 GHz and 5 GHz radios, the Cisco Aironet 1200 Series preserves existing IEEE 802.11b investments and provides a migration path to future IEEE 802.11a and IEEE 802.11g technologies. Its modular design supports single- and dual-band configuration, plus the field upgradability to change these configurations as requirements change and technologies evolve.
XHC1232 16x12x8 Heated/Cooled
Enclosure
XCT1232 Ceiling Tile Enclosure
www.terrawave.com
Enclosure Solutions for the Cisco 1232 Access Point (802.11 a/g Dual Band)
(210) 375-8482 - www.terrawave.com Page 9
XFW1232 12x10x6 Fiberglass Enclosure
with Window
See the following pages for information on each NEMA solution
XPC1232 12x10x6 Polycarbonate Enclosure
with Clear Door
XSW1232 12x10x6 Steel Enclosure with Window
XSD1232 12x10x6 Steel Enclosure
with Solid Door
XPS1232 12x10x6 Polycarbonate Enclosure
with Solid Door
XSS1232 12x10x6 Stainless Steel Enclosure
with Solid Door
XHC1232 16”x12”x8” Heated/Cooled Enclosure—Includes the Cisco 1232 Access Point
The IP54 steel enclosure is perfect for indoor or outdoor use to help protect the Cisco 1232 access point from the elements, theft or damage. The heated/cooled element is perfect for enabling 802.11 networks in harsh environments.
Construction: - 1.4mm (16 gauge) steel - Seams continuously welded and ground smooth - Body flange trough prevents liquids and contaminants from entering the enclosure - Seamless foam-in-place gasket provides oil-tight and dust-tight seal against contaminants - Self-grounding latch system with double seal provides maximum protection against leakage
Finish: - Textured light gray polyester powder paint inside and out over phosphatized surfaces
Included Components: - Cisco AP1232 - 16”x12”x8” Heated/Cooled Enclosure for the AP1232 - Bulkhead Extender - RPTNC Right Angle Plug to RPTNC Bulkhead Jack
Construction: - 1.4 mm (16 gauge) steel - Seams continuously welded and ground smooth - Body flange trough prevents liquids and contaminants from entering enclosure opening - Large perimeter opening facilitates component installation, maintenance or conversion - Seamless foam-in-place gasket provides oil-tight and dust-tight seal against contaminants - M6 base flange grounding stud on body - M6 base flange bonding provision on cover or door Finish: - Textured light gray polyester powder paint covers inside and out over phosphatized surfaces. Included Components: - Cisco AP1232 - 12”x10”x6” Steel Enclosure with a Window for the AP1232 - Bulkhead Extender - RPTNC Plug to RPTNC Jack
XSW1232 12”x10”x6” Steel Enclosure with a Window—Includes the Cisco 1232 Access Point
This NEMA 12 enclosure is perfect for indoor or outdoor use to help protect the Cisco 1232 access point from the elements theft or damage. This enclosure, made of steel, is extremely durable and rugged. The window provides a clear view of the AP and indicator lights.
For questions on this and other Wi-Fi solutions, contact a TerraWave account manager. (210) 375-8482 - www.terrawave.com Page 10
www.terrawave.com
Enclosure Solutions for the Cisco 1232 Access Point (802.11 a/g Dual Band)
XSD1232 12”x10”x6” Steel Enclosure with a Solid Door– Includes the Cisco 1232 Access Point
This NEMA 12 steel enclosure is perfect for indoor or outdoor use to help protect the Cisco 1232 access point from the elements, theft or damage. This enclosure, made of steel, is extremely durable and rugged.
Construction: - 1.4 mm (16 gauge) steel - Seams continuously welded and ground smooth - Body flange trough prevents liquids and contaminants from entering enclosure opening - Large perimeter opening facilitates component installation, maintenance or conversion - Seamless foam-in-place gasket provides oil-tight and dust-tight seal against contaminants - M6 base flange grounding stud on body - M6 base flange bonding provision on cover or door Finish: - Textured light gray polyester powder paint covers inside and out over phosphatized surfaces. Included Components: - Cisco AP1232 - 12”x10”x6” Steel Enclosure with a Window for the AP1232 - Bulkhead Extender - RPTNC Plug to RPTNC Jack
XPC1232 12”x10”x6” Polycarbonate Enclosure with a Clear Door—Includes the Cisco 1232 Access Point
This 12”x10”x6” thermoplastic NEMA 4X rated enclosure is intended for outdoor or indoor use to protect the Cisco 1232 AP. The enclosure, made from polycarbonate material, is durable, extremely affordable and is the lightest weight enclosure solution TerraWave offers. The clear door provides an unobstructed view of the AP and indicator lights.
Features: - Constructed of thermoplastic material - UL Listed - Closes with stainless steel latches - Solid opaque covers - Color is light gray with a gloss finish Included Components: - Cisco AP1232 - 12”x10”x6” Polycarbonate Enclosure with a Clear Door for the AP 1232 - Bulkhead Extender—RPTNC Plug to RPTNC Jack
For questions on this and other Wi-Fi solutions, contact a TerraWave account manager. (210) 375-8482 - www.terrawave.com Page 11
www.terrawave.com
Enclosure Solutions for the Cisco 1232 Access Point (802.11 a/g Dual Band)
www.terrawave.com
Enclosure Solutions for the Cisco 1232 Access Point (802.11 a/g Dual Band)
XPC1232 12”x10”x6” Polycarbonate Enclosure with a Solid Door—Includes the Cisco 1232 Access Point
This 12”x10”x6” thermoplastic NEMA 4X rated enclosure is intended for outdoor or indoor use to protect the Cisco 1232 AP. The enclosure, made from polycarbonate material, is durable, extremely affordable and is the lightest weight enclosure solution TerraWave offers.
Features: - Constructed of thermoplastic material - UL Listed - Closes with stainless steel latches - Solid opaque covers - Color is light gray with a gloss finish Included Components: - Cisco AP1232 - 12”x10”x6” Polycarbonate Enclosure with a Solid Door for the AP 1232 - Bulkhead Extender—RPTNC Plug to RPTNC Jack
XSS1232 12”x10”x6” Stainless Steel Enclosure with a Solid Door—Includes the Cisco 1232 Access Point
This NEMA 4X rated stainless steel enclosure is intended for outdoor use to protect the Cisco 1232 AP from corrosion, dust, rain, extreme temperatures and unauthorized access or inadvertent contact with the controls and wiring located inside the enclosure. Constructed from stainless steel, this enclosure is extremely durable and rugged. Construction: - 1.4 mm (16 gauge) steel - Seams continuously welded and ground smooth - Body flange trough prevents liquids and contaminants from entering enclosure opening - Large perimeter opening facilitates component installation, maintenance or conversion - Seamless foam-in-place gasket provides oil-tight and dust-tight seal against contaminants - M6 base flange grounding stud on body - M6 base flange bonding provision on cover or door Finish: Enclosure is not painted. Cover and body have a smooth brushed finish. Included Components: - Cisco AP 1232 - 12”x10”x6” Stainless Steel Enclosure with a Solid Door for the AP 1232 - Bulkhead Extender—RPTNC Plug to RPTNC Jack
For questions on this and other Wi-Fi solutions, contact a TerraWave account manager. (210) 375-8482 - www.terrawave.com Page 12
Construction: - Made from corrosion-resistant hot compression molded fiberglass reinforced polyester - Window is clear polycarbonate - Capable of withstanding continuous temperatures from -58°F up to 302°F
Finish: Textured light gray polyester powder paint covers enclosure inside and out.
Included Components: - Cisco AP 1232 - 12”x10”x8” Fiberglass Enclosure with a Window for the Cisco AP 1232 - Bulkhead Extender—RPTNC Plug to RPTNC Jack
For questions on this and other Wi-Fi solutions, contact a TerraWave account manager. (210) 375-8482 - www.terrawave.com Page 13
www.terrawave.com
Enclosure Solutions for the Cisco 1232 Access Point (802.11 a/g Dual Band)
TerraWave's Ceiling Tile Enclosure contains and protects the Cisco 1232 AP in an aesthetically pleasing and stealthy solution within a suspended ceiling. Suspended in a similar manner as the ceiling tile grid, this smart solution is suspended by wire to the roof structure. Required hardware is provided to hold the weight of this enclosure.
Installation requires cutting an existing ceiling tile from its original 2’ x 4’ size to 2’ x 3’. A two inch section of ceiling tile grid is provided to dress the installation. Antennas are mounted with no exposed cable. Once installed, the AP is protected and hidden from view, in a solution that is flush with the ceiling tile.
XLP1232 Ceiling Tile Enclosure—Includes the Cisco 1232 Access Point
XFW1232 12”x10”x6” Fiberglass Enclosure with a Window—Includes the Cisco 1232 Access Point
This NEMA 4X rated fiberglass enclosure is intended for outdoor use to protect wireless equipment from corrosion, dust, rain, extreme temperatures and unauthorized access or inadvertent contact with the controls and wiring located inside the enclosure. May be used indoors if needed.
www.terrawave.com
Enclosure Solutions for the Cisco 1131 Access Point (802.11 a/g)
Cisco 1131 AP—Cisco Aironet 1130AG Series IEEE 802.11a/b/g access points provide high-capacity, high-security, enterprise-class features in an unobtrusive, office-class design. Delivering WLAN access with the lowest total cost of ownership, its dual IEEE 802.11a and 802.11g radios provide a combined capacity of up to 108 Mbps to meet the needs of growing WLANs.
TerraWave's 12x10x6 thermoplastic enclosure is NEMA 4X rated. It is intended for outdoor or indoor use to protect the Cisco 1131 AP from the elements and theft. This enclosure, made from polycarbonate material, is durable, extremely affordable and is the lightest weight enclosure solution TerraWave offers. The clear door provides an unobstructed view of the AP and indicator lights.
XPC1131 12x10x6 Polycarbonate Enclosure with Clear Door— Includes the Cisco 1131 Access Point
Features: - Constructed of thermoplastic material - UL Listed - Closes with stainless steel latches - Solid opaque covers - Color is light gray with a gloss finish
Included Components: - Cisco 1131 AP - 12”x10”x6” Polycarbonate Enclosure with a Clear Door - Universal Mounting Plate
XPS1131 12x10x6 Polycarbonate Enclosure with Solid Door—Includes the Cisco 1131 Access Point
TerraWave's 12x10x6 thermoplastic enclosure is NEMA 4X rated. It is intended for outdoor or indoor use to protect the Cisco 1131 AP from the elements and theft. This enclosure, made from polycarbonate material, is durable, extremely affordable and is the lightest weight enclosure solution TerraWave offers.
Features: - Constructed of thermoplastic material - UL Listed - Closes with stainless steel latches - Solid opaque covers - Color is light gray with a gloss finish Included Components: - Cisco 1131 AP - 12”x10”x6” Polycarbonate Enclosure with a Solid Door - Universal Mounting Plate
For questions on this and other Wi-Fi solutions, contact a TerraWave account manager.
(210) 375-8482 - www.terrawave.com Page 14
Cisco 1310 Wireless Bridge—The Cisco Aironet 1310 Outdoor Access Point/Bridge provides high speed and cost-effective wireless connectivity between multiple fixed or mobile networks and clients. The flexibility of the device allows it to operate as a wireless bridge, access point, or workgroup bridge. The 1310 access point/bridge provides 54-Mbps data rates with a proven, secure technology. Based on the Cisco IOS operating system, the 1310 access point/bridge includes advanced features such as Fast Secure Layer 2 Roaming, QoS, and VLANs.
Features: - Constructed of thermoplastic material - UL Listed - Closes with stainless steel latches - Color is light gray with a gloss finish
Included Components: - Cisco 1310 Wireless Bridge - 12”x10”x6” Polycarbonate Enclosure with a Clear Door and Vents - Universal Mounting Plate
XPS1310 12”x10”x6” Polycarbonate Enclosure with a Solid Door and Vents for the Cisco 1310 Wireless Bridge
TerraWave's 12”x10”x6” thermoplastic enclosure is NEMA 4X rated. It is intended for outdoor use to protect the Cisco 1310 wireless bridge from the elements and theft. This enclosure, made from polycarbonate material, is durable, extremely affordable and is the lightest weight enclosure solution TerraWave offers. The vents offer sufficient ventilation for the bridge in outdoor conditions .
Features: - Constructed of thermoplastic material - UL Listed - Closes with stainless steel latches - Color is light gray with a gloss finish Included Components: - Cisco 1310 Wireless Bridge - 12”x10”x6” Polycarbonate Enclosure with a Solid Door and Vents - Universal Mounting Plate
www.terrawave.com
Enclosure Solutions for the Cisco 1310 Wireless Bridge (802.11 b/g)
(210) 375-8482 - www.terrawave.com Page 15
For questions on this and other Wi-Fi solutions, contact a TerraWave account manager.
XPC1310 12”x10”x6” Polycarbonate Enclosure with a Clear Door and Vents—Includes the Cisco 1310 Wireless Bridge
TerraWave's 12”x10”x6” thermoplastic enclosure is NEMA 4X rated. It is intended for outdoor use to protect the Cisco 1310 wireless bridge from the elements and theft. This enclosure, made from polycarbonate mate-rial, is durable, extremely affordable and is the lightest weight enclosure solution TerraWave offers. The vents offer sufficient ventilation for the bridge in outdoor conditions and the clear door provides a perfect view of the bridge and indicator lights.
www.terrawave.com
Enclosure Solutions for the Cisco 1242 Access Point (802.11 a/b/g)
Enclosure solutions for the Cisco 1242 AP will soon be available. All enclosure solutions for the Cisco 1232 AP will be available for the Cisco 1242 AP in the coming days. Please call (210) 375-8482 x124 for an updated catalog.
For questions on this and other Wi-Fi solutions, contact a TerraWave account manager.
(210) 375-8482 - www.terrawave.com Page 16
Cisco 1242 AP—The Cisco Aironet 1240AG Series IEEE 802.11a/b/g access points deliver the versatility, high capacity, security, and enterprise-class features demanded by WLAN customers. It is designed specifically for challenging RF environments like factories, warehouses, and large retail establishments that require the antenna versatility associated with connectorized antennas, a rugged metal enclosure, and a broad operating temperature range.
About TerraWave Solutions and the Cisco Solutions Technology Agreement As a Cisco Solutions Technology Integrator (STI), TerraWave Solutions offers tailored NEMA rated enclosures to house Cisco wireless technology. TerraWave’s NEMA enclosures are specifically designed to protect Cisco’s Wireless LAN (WLAN) products from environmental threats such as heat, cold, dust and rain as well as theft and tampering. TerraWave’s Wi-Fi NEMA rated enclosures are used in vertical markets where the protection and enhancement of a Cisco 802.11 deployment is crucial including, education, government, military, healthcare, hospitality, transportation, retail, commercial, manufacturing, distribution and office buildings. TerraWave Solutions strength as an experienced Wi-Fi solution provider ensures that customers receive Cisco’s quality WLAN technologies along with TerraWave’s unrivaled value added consulting and support services.
About TerraWave Solutions TerraWave Solutions offers Wi-Fi accessories and infrastructure solutions to partners throughout the world. Focusing solely on 802.11 products, TerraWave manufactures, integrates and supplies Wi-Fi components based on the unique requirements of every client. Providing partners with custom Wi-Fi solutions that address every aspect of wireless LAN deployment in the enterprise, TerraWave’s unrivaled wireless networking knowledge and comprehensive line of leading-edge products means our partners receive complete solutions needed to deploy, manage and secure a wireless network. Additionally, TerraWave's engineers provide high-caliber tech support, consulting, training, integration, staging and set-up. Contact Us TerraWave's corporate headquarters are located in San Antonio, Texas. For more information on Cisco and TerraWave’s NEMA enclosures for Cisco WLAN deployment, go to www.terrawave.com, call 210.375.8482 or email [email protected].
www.terrawave.com
Page 17
TerraWave Solutions 10521 Gulfdale
San Antonio, Texas 78216