1
BLAST WHEELS Pangborn Corp. announced the release of its innovative Genesisfam- ily of wheels. The Genesis family of wheels offers high performance, bet- ter cleaning, and significantly lowers operating costs. The Genesis line includes high-speed, 14-18" diameter wheels with either single or double- sided runner heads. The low-speed, 19.5-26.5" diameter wheels provide reduced consumption of abrasives, better cleaning, and lower horsepower requirements. Pangborn's new Genesis blast wheels offer major improvements over traditional blast wheels, the company said. For more information, call (800) 638-3000 or visit www.pangborn.corn. Circle 408 on reader service card horsepower, come standard with a patented additional fluid flow path around the bushing. This additional path allows the process fluid, or air, to cool the bushing of the impeller from the outside, while continuing to offer the internal spiral cooling channel found on most magnetic- drive centrifugal pumps. This unique heat-dissipation technology prevents the heat build-up that so often dam- ages or completely disables the shaft bushing. For more information, call Krystal Jaekel at (909) 422-1700 or e- mail [email protected]. Circle 407 on reader service card MAG-DRIVE PUMPS Wilden, a worldwide provider of air- operated double-diaphragm pump technology, offers T-Mag Mag- Drive pumps that are ideally suited for use in cleaning caustic recircula- tion lines within aggressive environ- ments found in the metal plating and coatings manufacturing indus- try. Because vari- ous types of caustics are used in these types of facilities, it is imperative that the recirculation lines are entirely free of previous product to prevent cross-contami- nation. T-Mag Mag-Drive pumps, which are available in sizes from to 5 insulated, unheated entrance vestibule, a 144" long insulated heat zone with recirculated airflow, and a 24" long insulated, unheated exit vestibule. This oven is suspended from the factory ceiling and operated by a remote control panel. For more information on these and other mod- els, call (847) 546-8225, e-mail [email protected], or visit wu-w.gnevecorp.com. Circle 405 on reader service card Circle 406 on reader service card NEW PLATING LITERATURE A new brochure from Uyemura dis- cusses Umicore Galvanotechnik precious metal electrolytes for func- tional and decorative plating. Included are six Auruna processes, including fine, hard, immersion, and electroless golds, in addition to direct gold plating and Auruna- Color. Black and white rhodium elec- trolytes, Arguna hard and fine silver coatings, and four other white pre- cious metals (palladiums, platinum, and ruthenium) are also covered, along with Miralloy nickel alterna- tive. The brochure also discusses cus- tomized processes for high-speed deposition. For more information or to receive a copy of the brochure, call (860) 793-4011 or visit wu-w.uyemu- ra.com. Models such as No. 876, a 500°F gas-heated belt conveyor oven, are currently used for drying brass and aluminum parts at a customer's facility. The workspace dimensions of this unit measure 22"W x 126"0 x 15" H. The workload rides through an 18" long open belt loading zone, 126" long insulated heat zone with recirculated airflow, 6" long open zone, 72" long cooling zone, and a 12" long open unloading zone. Model No. 878 is a 350°F gas-heat- ed tunnel oven from Grieve that was recently installed for drying water from aluminum parts hung on a monorail pass-through conveyor. Workspace dimensions of this unit measure 30"W x 192"0 x 66"H. The workload passes through a 24" long INDUSTRIAL OVENS Grieve Corp., manufacturer of industrial ovens and furnaces, can custom-design models to meet near- ly all of your industrial needs. faces. The system requires no heat, no water usage, and creates no waste. CAL PREP OS products easily clean oils and greases, disperse particulate soils, and simultaneously deposit polymeric resins, adhesion promot- ers, and corrosion inhibitors on sub- strates for superior temporary unpainted corrosion protection and superior paint adhesion. For more information, call (513) 874-1113 or visit www.calvaryindusrries.com. Circle 404 on reader service card NEW proCJucts www.metalfinishing.com July/August 20091 metalflnlshing 157
