+ All Categories
Home > Documents > New this year is an expanded and highly detailed · • ICBO recognized for seismic zones...

New this year is an expanded and highly detailed · • ICBO recognized for seismic zones...

Date post: 18-Aug-2018
Category:
Upload: hoangdang
View: 214 times
Download: 0 times
Share this document with a friend
16
Transcript

Our Product and Resource Book is not just a catalog of the quality

Red Head Anchoring Systems so many of you have come to rely on,

but a resource guide to give you the information you need to help you

work better, faster and easier.

New this year is an expanded and highly detailed

Application Section. This new section allows you

to look up your trade or specialty, view a variety

of practical applications and receive detailed

product recommendations. Along with the

product recommendations you’ll notice page numbers for easy reference

to the product selection and specifications pages.

Another “new” item this year is the consolidation of our Adhesive

Anchoring System under the Red Head brand name. The old Epcon

name may be gone, but the versatile adhesive anchoring products

and formulas remain.

As always this Product and Resource Book continues to provide a

wealth of valuable information including: product approvals/listings,

applications, selection charts, performance tables and installation steps.

Remember, if you ever need more information about ITW Ramset/Red

Head products, technology and service, contact your local distributor, or

look on the back cover for a complete listing of ITW Ramset/Red Head

facilities. We welcome your calls and feedback, and look forward to

answering any questions you might have.

Welcome to the Red Head Product & Resource Book

Table of Contents

Anchoring Systems

Fastening Applications Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Electrical Contractor Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Mechanical Contractor Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Drywall Contractor and Carpenter Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Acoustical Ceiling Installer Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Steel Erector & Curtain Wall Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Concrete and Masonry Contractor Applications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Water & Waste Water Treatment Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Highway and Bridge Contractor Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

General Contractor Applications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Material Handing Applications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Specialty Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Anchoring Working Principles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Red Head Adhesive Anchoring Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Adhesive Anchoring Selection Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

A7 Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

C6 Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

NEW G5 Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Umbrella Inserts and Stubby Screens . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

Screen Tubes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

Maxima 7 Capsules. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

Impact Capsules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

Accessories and Tool Repair Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

Red Head Mechanical Anchoring Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57

Anchoring Selection Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

Trubolt Wedge Anchors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62

Large Diameter Tapcon (LDT™) Anchors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68

Multi-Set II Drop-in Anchors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73

Dynabolt Gold . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78

Dynabolt Sleeve Anchors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82

Stud Anchors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86

Redi-Drive Anchors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88

Tapcon Anchors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92

E-Z Ancor Anchors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97

Hammer-Set Anchors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99

Nylon Drive Anchors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101

Poly-Set Anchors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102

Carbide Bits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103

1�

Call our toll free number 800-899-7890 or visit our web site for the most current product and technical information at www.ramset-redhead.com

Trubolt LDT Dynabolt Dynabolt StudGold

Redi-Drive

Tapcon

Nylon-DriveMulti-Set

New Products

| S TA I N L E S S S T E E L L DT

S E E PAG E 6 8

The Large Diameter Tapcon (LDT™),

the high performance anchor that

cuts its own threads into concrete, is

now available in 410 stainless steel.

| S TA I N L E S S S T E E L TA P CO N

S E E PAG E 9 2

Also available new this year is

Tapcon, the “original masonry

anchor” in 410 stainless steel.

| DYN A B O LT GO L D

S E E PAG E 7 8

Our new heavy duty sleeve

anchor has a unique expansion

sleeve designed to pull down

uneven base plates with

tremendous holding power.Stainless Steel Dynabolt Gold available December 2002

| NYLO N D R I V E A N C H O R S

S E E PAG E 1 0 1

These anchors, made from

Polyamide 6.6, a highly durable

nylon formulation, are a fast

and removable solution for all

types of masonry.Nylon Drive Anchors available November 2002

| N E W G 5S E E PAG E 4 0

This new formulation combines the

best attributes in one epoxy—an

extended working time (15 minutes)

AND a fast cure time (2 hours).

Fastening Applications Guide

While these are not to be considered complete, they willgive you an idea of how contractors use our products.

For example, on the Electrical Contractor page, you will find applications, such as junction box/panel boards and

suspended lighting. Next to the diagrams are the productname(s) and page number in this catalog where you willfind complete information on these products needed forthat particular application.

This section highlights a variety of trade applications and providesinformation that will assist you inselecting the best fastening systemfor your application.

ADHESIVE ANCHORING SYSTEMS

4 Call our toll free number 800-899-7890 or visit our web site for the most current product and technical information at www.ramset-redhead.com

Electrical ContractorApplications

TransformersSwitch GearElectrical Enclosures

LightStandardsPoles

Junction Box/Panel Boards

Suspended Pipeor Conduit

Conduit Clip

SuspendedLighting

Unistrut-CableTray/Conduit

Wall Mounted Lighting

REDI-DRIVE

MULTI-SET

TRUBOLT

TRUBOLT

DYNABOLT GOLD

C6 ADHESIVE

MULTI-SET

PIPE DRIVE• Available in carbon, hot

dipped galvanized, 304 and 316 stainless steel

• ICBO recognized for seismic zones

• Finished head style• Removable• For use in concrete,

brick or block

• Available in special 3/8"version for precast planks

• Available in sizes 1/4" to 3/4"internal thread diameters

• Simple to install• Drill hole, hammer

Redi-Drive into hole• Available in several

head styles and lengths

• Available in special 3/8" version for precast planks

• Available in sizes 1/4" to 3/4"internal thread diameters

• Single piece anchors (no couplers!)

• Drill hole, hammer in• 1/4" and 3/8" internally

threaded inserts

• Used with rod coupler• 1/4" to 1-1/4" diameters• ICBO recognized for seismic zones

• Simple to install• Drill hole, hammer

Redi-Drive into hole• Available in several

head styles and lengths

Pg. 62

Pg. 88

Pg. 78

• “Stress Free” anchor–can be used close to edges or in close spacing pattern

Pg. 34

Pg. 73

Pg. 73

Pg. 62

Pg. 88

Pg. 88

REDI-DRIVE

5Call our toll free number 800-899-7890 or visit our web site for the most current product and technical information at www.ramset-redhead.com

Mechanical ContractorApplications

Pumps

Heavy-Duty Pipe Support

Ductwork/HVAC

Pipe Support,Fire Sprinkler

Machinery and Equipment

Pipe/StrutAttachment

REDI-DRIVE

LDT

PIPE DRIVE

MULTI-SET

TRUBOLT

C6 ADHESIVE

C6 ADHESIVE

• 1-piece design (no couplers!)• Drill hole, hammer in• 1/4" and 3/8" internal threads

Pg. 88

• ICBO recognized for seismic zones

• Carbon, hot dipped galvanized, 304 and 316stainless steel

• 1/4" to 1-1/4" diameters

Pg. 62

• High load capacity• Corrosion resistant• NSF Approved

Pg. 34

• Available in special 3/8" versionfor prestressed concrete

• Available in 1/4" and 3/4" internal thread diameters

Pg. 73

• Simple to install–drill holeand hammer in

• Fire resistant

• Vibration resistant• Removable• 3/8" and 1/2" diameters

• Corrosion resistant• Vibration resistant• NSF Approved

Pg. 88

Pg. 68

Pg. 34

Drywall Contractor &Carpenter Applications

Window andDoor Frames

Furring Strips

Framing

Framing

Drywall Track

CeilingTrack

Floor Track

REDI-DRIVEPg. 88

REDI-DRIVE

• Ideal for fastening to concrete or block

• Simple to use–drill hole and hammer in

• Setting tool (RDST) available for tight spaces

Pg. 88

REDI-DRIVE

• Simple to use–drill holeand hammer in

• Setting tool (RDST) available for tight spaces

• Simple to use–drill hole and hammer in

• Setting tool (RDST) available for tight spaces

Pg. 88

TRUBOLT

• Full threaded for maximum versatility

• ICBO recognized for seismic zones

• Metro-Dade Approved• Other approvals on page 62

Pg. 62

LDT

• Drill hole, drive in byhand or impact wrench

• ICBO recognized for seismic zones

• Available in 3/8" and1/2" diameters

Pg. 68

DYNABOLT

• Counter sunk and thresholdhead styles

• Work in concrete, block and brick

Pg. 82

6 Call our toll free number 800-899-7890 or visit our web site for the most current product and technical information at www.ramset-redhead.com

7Call our toll free number 800-899-7890 or visit our web site for the most current product and technical information at www.ramset-redhead.com

Acoustical Ceiling InstallerApplications

Acoustical Ceiling

REDI-DRIVE

• Redi-Drive used with angle clip• Simple to use, drill hole and

hammer inPg. 88

TIE WIRE WEDGE

• Single piece design• Drill hole, hammer wedge

into hole, pull down withclaw hammer

Pg. 88

REDI-DRIVETIE DRIVE

• Simple to use–drill holeand hammer in

• Single piece design• Fewest steps of any system

Pg. 88

MAXIMA CAPSULES

• High load capacity

Pg. 53

Steel Beams/Columns

A7 ADHESIVE

• Ideal for closely spacedgroups of anchors

Pg. 22

LDT

• Design allows for expansion andcontraction of the frame

• Finished head• Works in multiple base materials

Pg. 68

Steel Erector & Curtain Wall Applications

Ornamental Iron

Stairs andLadders

CurtainWall

Protective Railingsand Fencing

Support Anglesand Ledgers

Hand Railings

DYNABOLT

TRUBOLT

• Fully threaded for maximum versatility• Carbon steel, hot dipped galvanized or

stainless steel available

Pg. 62

TRUBOLT

• Fully threaded for maximum versatility

• Available in carbon steel,hot dipped galvanized orstainless steel

Pg. 62

• Multiple head styles• Ideal for concrete, brick and block• Carbon and stainless steel

Pg. 82

DYNABOLT

• Multiple head styles• Ideal for concrete, brick and block• Carbon and stainless steel

Pg. 82

DYNABOLT GOLD

• Finished head• Removable• Ideal in concrete block

Pg. 78

LDT

• Finished head• Removable• For use in concrete

Pg. 68

8 Call our toll free number 800-899-7890 or visit our web site for the most current product and technical information at www.ramset-redhead.com

9Call our toll free number 800-899-7890 or visit our web site for the most current product and technical information at www.ramset-redhead.com

Concrete & MasonryContractor Applications

Concrete FormworkStone Attachment

Concrete Block Reinforcement

Rebar Doweling

Ledger AngleAttachment

Stone Attachment

A7 ADHESIVE WITHUMBRELLA

COIL THREAD DROP-IN ANCHOR

TRUBOLT

A7 ADHESIVE

• Fast curing adhesive–ideal for moderate tocold climates

Pg. 22

NEW G5 ADHESIVE

• Fast curing adhesive–ideal for moderate tohot climates

A7 ADHESIVE

• Compact space• No-drip–

no sag formula• Easy clean up

Pg. 22

A7 ADHESIVE

• Fast curing adhesivefor rebar doweling

Pg. 22

• Fully threaded for maximum versatility• Available in carbon, hot dipped galvanized

and stainless steel

Pg. 62

Pg. 22

• Designed for 1/2" and 3/4" coil rods• Ideal for 1-sided forming

• High load capacity inconcrete block

• No drip–no sag formula• Easy clean up

Pg. 73

Pg. 40

Brick Pinning

10 Call our toll free number 800-899-7890 or visit our web site for the most current product and technical information at www.ramset-redhead.com

Water & Waste WaterTreatment Applications

PUMPS

Weirs and Gates

Bar Screens

Railings and LaddersWear Strip

Conveyors

Covers andDomes

Instrumentation and Controls

Diffusers

PipeSupports

C6 ADHESIVE

• NSF Approved• Vibration resistant• Corrosion resistant

Pg. 34

C6 ADHESIVE

• NSF Approved• Vibration resistant• Corrosion resistant

Pg. 34

C6 ADHESIVE

• NSF Approved• Vibration resistant• Corrosion resistant• Can be installed

underwater

Pg. 34

C6 ADHESIVE

• NSF Approved• Vibration resistant• Corrosion resistant

Pg. 34

C6 ADHESIVE

• NSF Approved• Vibration resistant• Corrosion resistant

Pg. 34

TRUBOLT

• Multiple head styles• Heavy duty• 360˚ hole contact• 304 and 316 stainless steel

Pg. 62

TRUBOLT

• Fully threaded for maximum versatility

• Available in 304 and 316stainless steel and galvanized

Pg. 62

TRUBOLT

• Multiple head styles• Heavy duty• 360˚ hole contact• 304 and 316

stainless steel

Pg. 62

3/8" LDT

• Finished head• Removable• Install by hand or

with impact wrench

Pg. 68

MULTI-SET

• Special 3/8" version for prestressed concrete• Available in 1/4" – 3/4" internal diameters• Stainless steel available

Pg. 73

11Call our toll free number 800-899-7890 or visit our web site for the most current product and technical information at www.ramset-redhead.com

Highway & BridgeContractor Applications

▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲

▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲

▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲

▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲

▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲

▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲

▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲

▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲

▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲

▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲

▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲

▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲

▲ ▲ ▲ ▲ ▲ ▲

▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲

▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲

Concrete Pavement Lane Addition and

Joint Repair

SuspendedConduit

Steel Guard RailPost Attachment

to Concrete

DownSpouts

Mile MarkersWireLoops

GlareScreens

Guard RailAttachments to

Bridges

Temporary Fastening of Jersey Barriers to Concrete

Bridge MountedSigns

RebarDoweling

“J” Bolt

Some states do not maintain an approval list for adhesive anchoring systems. For approvals contact local engineering on a per project basis.For the most current D.O.T. approval information contact our Technical Services Department at 1-800-899-7890

A7

C6NEW G5ImpactMaxima 7

Department of Transportation Approvals & Listings

Adhesive Products

Cartr

idge

sCa

psul

es

MAXIMA CAPSULES

• Vibration resistant• Corrosion resistant

Pg. 53

MAXIMA CAPSULES

• Impact resistant• Ideal for use in

bolt pattern

Pg. 53

MAXIMA CAPSULES

• Impact resistant• Ideal for use in

bolt pattern

Pg. 53

TRUBOLT

• Carbon, hot dippedgalvanized, 304 or316 stainless steel

Pg. 62

5/8" MULTI-SET

• Lipped anchor–remains flush with face of concrete

Pg. 73

A7 ADHESIVE

• Fast dispensing, fastcuring adhesive

• Works with epoxycoated dowels

Pg. 22

A7 ADHESIVE

• Fast curing• Can be used in damp

or water filled holes

Pg. 22

A7 ADHESIVE

• Fast curing• Can be used in damp

or water filled holes

Pg. 22

A7 ADHESIVE

• Fast curing

Pg. 22

Alab

ama

Alas

kaAr

izona

Arka

nsas

Calif

orni

aCo

lora

doCo

nnec

ticut

Delaw

are

Florid

aGe

orgi

aHa

waii

Idah

oIll

inoi

sIn

dian

aIo

waKe

ntuc

kyLo

uisia

naM

aine

Mar

yland

Mas

sach

uset

tsM

ichig

anM

inne

sota

Miss

issip

piM

issou

riM

onta

naNe

bras

kaNe

vada

New

Ham

pshi

reNe

w Je

rsey

New

Mex

icoNe

w Yo

rkNo

rth Ca

rolin

aNo

rth D

akot

aOh

ioOk

lahom

aOr

egon

Penn

sylva

nia

Rhod

e Isla

ndSo

uth

Caro

lina

Sout

h Da

kota

Tenn

esse

eTe

xas

Utah

Verm

ont

Virg

inia

Was

hing

ton

Wes

t Virg

inia

Wisc

onsin

Wyo

min

gPo

rt Au

thor

ity of

NY

& NJ

Wes

t Palm

Bea

ch

REDI-DRIVE

• Tamper proof• Simple to use

Pg. 88

REDI-DRIVE

• Tamper proof• Simple to use

Pg. 88

12 Call our toll free number 800-899-7890 or visit our web site for the most current product and technical information at www.ramset-redhead.com

General ContractorApplications

Replacement of MisplacedAnchors

Tilt Wall Anchorage

Seismic Hold Downs

Replacement ofDamaged Anchors

Cast-In-Place Bolt inWrong Location

Damaged Cast-In-Place Anchor

TRUBOLT

• Available in 3/4" x 7"• Drill hole deeper than anchor

length, pound into hole after use

Pg. 62

A7 ADHESIVE

• Can be used in 1/16" oversized or1/8" oversized holes

• ICBO recognized for seismic zones

Pg. 22

A7 ADHESIVE

• Can be used in 1/16" oversized or1/8" oversized holes

• ICBO recognized for seismic zones

Pg. 22

NEW G5 ADHESIVE

• Ideal for hot climates–extendedworking time formula

Pg. 40

NEW G5 ADHESIVE

• Extended workingtime–ideal for warmto hot climates

Pg. 40

A7 ADHESIVE

• Can be used in 1/16"oversized or 1/8"oversized holes

• ICBO recognized forseismic zones

Pg. 22

NEW G5 ADHESIVE

• Extended working time–idealfor warm to hot climates

Pg. 40

1/2" LDT

• ICBO recognized forseismic zones

• 1/2" and 3/8"diameters available

Pg. 68

REPLACE WITH

13Call our toll free number 800-899-7890 or visit our web site for the most current product and technical information at www.ramset-redhead.com

OverheadDoors

Dock Bumpers

Shelving

Rails

Racks

Conveyors

3/8" LDT

• Hand installationblock or concrete

Pg. 68

Pg. 22

A7 ADHESIVE WITHUMBRELLA

• High load in hollowblock or concrete

1/2" LDT

• Finished head• Removable• Installs with impact wrench• Single piece design

Pg. 68

LDT

• Finished head• Removable• 3/8" to 5/8" diameters

Pg. 68

LDT

• Finished head• Removable• Installs with impact wrench

Pg. 68

Pg. 68

1/2" DYNABOLT

• Finished head• Removable

Pg. 82

3/8" LDT

• Finished head• Removable• Installs with impact wrench• Single piece design

Pg. 68

3/8" DYNABOLT GOLD

• Finished head• Removable

Pg. 78

5/8" DYNABOLT GOLD

• Finished head• Removable

Pg. 78

A7 ADHESIVE

• Fast curing• Impact resistant• Non-sag formula

Pg. 22

Material Handling Applications

LDT

• Removable• Easy to install• Single piece design

14 Call our toll free number 800-899-7890 or visit our web site for the most current product and technical information at www.ramset-redhead.com

Specialty Applications

Underwater Installation

Stadium Seating

Basement Wrap

Flooring Systems

For installation guidelines for your application, please contact our Technical Services Department at 1-800-899-7890.

Expansion Joints

REDI-DRIVE

• Simple to use–drillhole and hammer in

• Large diameter headsecurely fastens basement wrap

Pg. 88

REDI-DRIVE

• Simple to use–drillhole and hammer in

• Setting tool availablefor tight locations

Pg. 88

A7 ADHESIVE

• ICBO recognized forseismic zones

Pg. 22

NEW G5 ADHESIVE

• High load capacity• Suitable for use

close to edge of slab

Pg. 40

A7 ADHESIVE

• Corrosion resistant• Normal weight or

lightweight concrete• Used in major stadiums

across the country

Pg. 22

TRUBOLT

• Corrosion resistant• Normal weight or

lightweight concrete• Used in major stadiums

across the country• Immediate loading

Pg. 62

LDT

• Finished head• Removable• Installs by hand or

with impact wrench

Pg. 68


Recommended