Nice PPT of Actix Training in Details for Analyzing & Creating Report for New Actix User or Mid Lev...

8/10/2019 Nice PPT of Actix Training in Details for Analyzing & Creating Report for New Actix User or Mid Lev Users

1/69


2/69

*Part-2: SSV & Cluster Reports for 2G

*Part-3: SSV & Cluster Reports for 3G

* Part-1 : Customize Actix to prepare reports

*Part-4: Advance features of Post Processing by Actix


3/69


4/69

After installing & licensing actix then open the program from start menu, it will look like below picture


5/69

Create a site database in xcel single sheet containing all necessary site/cell info and

save it to text (Tab Delimited) format which is required to prepare cellrefs file for actix


6/69

Go to cell tab > Network Explorer > right click on network explorer > import> click to import from new

Template, select data file to import window will appear> select the text file which was saved in previous

page/step and click open


7/69

After opening text file from previous steps, import setting window will appear > put the template name > go

Next, column Setting window will appear > select the column for specific fields according to database that

we saved in test file in the previous steps. And go finish.

After click finish, another window will appear, selectYes and save it, restart actix, go view then new map


8/69

After creating cellrefs file, saved it and restart actix then go to view > Display new Map, then new map

window will appear.


9/69

Click to Cell-Site Tab > Select the fields that you want to display color for cell color and cell size and click OK.

To view the cell site layer go to layer control and select cell or site to make label or zoom options.

Layer control > Cell layer or site layer >

change the zoom, display and label

options

Remove the

tick from

Display

within Zoom

range to see

the cell in

the map

without map

area

limitations


10/69

Open Actix Analyzer > File > Open

Logfile or Press Ctrl+O

Then show the Log file that we need

for the report, for example I choose

coverage Log to see RSCP, PSC & EcNo

plots


11/69

After Open the Log files complete:

1. If you have more than one logs for getting same item; you need to merge the logs by super stream, go to Tools Tab >

Create Superstream > Select the MSs and Logs that you want to merge > you can also rename the super stream nameas you want > click OK and then you can see at the attribute Explorer inside the Superstream and all the items you can

find inside the super stream whatever available in that logs you have merged.


12/69

SSV & Cluster Reports for 2G


13/69

Basically we should check for 2G(GSM) SSV & Cluster reports:

1. Cross connection by Serving cell ID plots in Idle mode.

2. Signal strength of each sector by RxLev

3. Signal Quality of each cell by SQI & RxQual

4. GPRS/EDGE Throughput.

5. HO

6. Call statistics

etc.


14/69


15/69

Go to Attribute Explorer > Loaded data files >GSM > Downlink

Measurements > SerRxLevSub > Right Click and select Display on

map (or chart or Workbook ,if you want). or drag and drop into

opened map. RxLev sub will appear in the map.


16/69

Go to Attribute Explorer > Loaded data files >GSM > Downlink Measurements >

SerRxQualSub > Right Click and select Display on map (or chart or Workbook ,if you

want). or drag and drop into opened map. RxQual sub will appear in the map.


17/69

Go to Attribute Explorer > Loaded data files >GSM > Downlink Measurements >

Tems_SQI_Exp > Right Click and select Display on map (or chart or Workbook ,if

you want). or drag and drop into opened map. SQI will appear in the map.


18/69

Go to Attribute Explorer > Loaded data files >GSM > Event Data> Right Click and

select which you want to Display on map (or chart or Workbook ,if you want). or

drag and drop into opened map. Selected Event will appear in the map.


19/69

Go to Attribute Explorer > Loaded data files >select superstream or specific MS

in log folder > right click > select specific analysis or reports that could help you

to prepare 2G SSV or Cluster reports. Attached excel reports are 2 of them


20/69

SSV & Cluster Reports for 3G


21/69

Single site verification or check report means the graphical representation of

the field test that proves the site is working well at all the features

implemented according to the agreement between Vendor & Operator.

Basically we should check:

1. Cross connection by SC plots in Idle mode.

2. Signal strength of each sector by RSCP

3. Signal Quality of each cell by EcNo

4. HSDPA throughput in good radio environment like,

good RSCP, good EcNo, Good CQI.5.HSUPA Throughput in good radio environment.

6. Soft/softer HO.

7. IRAT HO, inter-freq HO etc..

8. Voice Call statistics

9. Video call statistics

etc.


22/69

After Opening the Log file and creating superstream in case of multiple logs, go to MSs that you want plot for lets say

RSCP, in the report for SSV for example I choose Idle mode coverage Log.

Go to Loaded data files in the attribute

Explorer > Specific Log file or stream > 3G

UMTS > Downlink measurements >

Uu_ActiveSet_RSCP_0 > right click and select

Display on Map if there is still no map yet,

if there is map window already opened then

just drag and drop it into map. After that RSCP

will appear in the map as shown here in left.

You can now take screen shot and paste it to

your excel or word format report.

Note: For RSCP in data mode Ue/MSyou have to get from calculated RSCP


23/69

Go to Loaded data files in the attribute Explorer > Specific Log file

or stream > 3G UMTS > Downlink measurements >

Uu_ActiveSet_EcNo_0 > right click and select Display on Map if

there is still no map yet, if there is map window already opened

then just drag and drop it into map. Then EcNo will appear in the

map as shown here at below . You can now take screen shot and

paste it into your excel or word format report.


24/69

Go to Loaded data files in the attribute Explorer > Specific Log file or

stream > 3G UMTS > Downlink measurements >

Uu_ActiveSet_EcNo_0 > right click and select Display on Map if

there is still no map yet, if there is map window already opened then

just drag and drop it into map. Then PSC will appear in the map as

shown here at below . You can now take screen shot and paste it

into your excel or word format report. Or you can check if there isany cross connection over the site by check the SCs according to their

3dB beam direction.


25/69

Go to the Layer that you want to modify legends, right click and

select modify ranges and you can change ranges, color and

update then click OK. Also there is another options if you right

click on specific Layer like changing the size of sample by clicking

attribute style.


26/69


27/69

Go 3G UMTS > UL Measurements > 3G HSUPA >

Ue_HSUPA_Throughput_MAC > right click and select

Display on chart(or select Display on map for plots). .

Similarly EcNo and AS SC just drag & drop on chart. Then

take screen shot & paste to report format


28/69

Go 3G UMTS > Event > right click on which you want in

plot and select Display on map for plots. Then take

screen shot & paste to report format


29/69

Cluster report means the graphical representation of the field test that shows

the network quality and features implemented according to the agreement

between Vendor & Operator.

Basically we should check:

1. Coverage distribution by SC plots by scanner data.

2. Signal strength of entire cluster by RSCP by scanner

MS or idle mode MS

3. Signal Quality of entire cluster.

4. HSDPA throughput.5.HSUPA Throughput.

6. Soft/softer HO.

7. IRAT HO, inter-freq HO etc..

8. Voice Call statistics

9. Video call statistics

etc.


30/69

Open any IE from GPS data like Speed

km/h into map > open layer control >

click export to KML > choose the IE

that opened on map > select location

for KML file > click OK. Open that

created KML file by google earth and

customize it by color & size suitable

with the report format


31/69

Go to superstream > 3G UMTS >

Downlink measurements >

Uu_Active_set_RSCP > Display on

map and click Display on chart for

the stat in Histogram. Similarly other IE

plots like EcNo, SC, HSDPA thrpt,

HSUPA thrpt, events etc you can get inreport format


32/69

Go to superstream > right click > Display form > UMTS AS and Monitor set or whatever you

want to see for analysis, for example there are some IE display form customized in the next

page for analysis purpose


33/69


34/69

Go to superstream > right click > there are some pre-installed reports by actix for statistical reports, for

example, click UMTS call statistics, then you can see details in the right side window and if you want to see in

excel format just click below report format and you can get it for your DT KPIs and event KPIs.


35/69


36/69

The purpose of using Network Image of Actix is for post processing a huge size of Log file specially for big cluster or city or

country wise data. Normally we cannot load more than 100 logs or more than 100 to 200 MB log files in Analyzer classic

mode of Actix. In that case we have use Network image to get the large amount of data into Actix for post processing.

Specially we use Network Image feature for creating the plots of various IE s of the drive test Logs like RxLev, RSCP, SQI, EcNo

Etc..thats are for binning data.

Lets say we have to create a report from a big cluster Logs . It must should have the following binned

data:

1. RxLev for GSM Network

2. RxQual for GSM Network

3. RSCP for WCDMA Network

4. EcNo for WCDMA Network

The Test was done by the following MS Configuration:

MS1= 2G Short Call

MS2= 3G Short voice Call


37/69


38/69

Step 2 for Choosing devices will appear. > Click Add > Add device Name and filter that Actix will load data from Only that

MS. In the filter option you must write exact name displaying left side of loaded data for 100% accuracy. > Click OK >

similarly add 2nddevice for MS2 like below: > after that in the right box the two device will appear like below picture: > then

click next. (for next step go next pages)


39/69


40/69


41/69

For 5thStep Select the Queries that if you prepared already before starting with Network Image. We will learn about Queries

after this chapter > If you dont need any queries then do not add any queries because adding any item will just increase the

time to load the log files into Actix for processing. Click Next. (for next step go next pages)


42/69

IN the final step to create a template of Network Image you can have overview the selections and you can go back to edit

the settings, then complete this wizard by clicking Finish After that you have to put the name of the template that you will

use later. I named it as below, Training 20110814. > save it . Now you can make a Network Image with this Template.

(go next pages to see how to create Network Image)


43/69


44/69


45/69

After logs loading complete the Network Image is ready . Also later you can use this Network Image without loading Logs or

you can add more logs if you want by same procedure. Now you can just get the attributes which you selected during the

Template wizard and plot them on map or drag and drop on map, take screen shot > paste it to report format or where ever

you want.


46/69

Using Analysis Manager we can Manage the Log processing according to the requirements of the report for both binning

data, cross Tab data, for Filtering, managing repository etc.

For Example we have a cluster Logs MS1 is for GSM short call & MS2 is for WCDMA short call, using this huge logs we will

prepare the following items in our report:

Plots for : 1. RSCP

2. EcNo

3. RxLev

4. RxQual

cell ID SC No. ofMOC CallOK No. of MTCCall OK call type Avg. CPICHEcNo Avg. CPICHRSCP Avg. Serving cellDistance Avg. Ue TxPower Avg. MOC Call Setup Time(ms)

U21_0150_1 499 0 0 0 -10.34 -91.33 33572.05137 -3.1

U21_1088_1 1 0 0 0 -5.25 -68.44 533.332361 -23.2

U21_1088_3 17 1 0 0 -5.29 -62.88 444.853331 -28.8 6070

Cell ID BCCH MOC Call OK MTC Call OK RxLev Sub RxQual Sub Serving cell Distance Call Setup Time(ms)

Site1088_DCS_1 766 1 0 -63 0 485.459823 2590

Site1153_DCS_1 784 1 0 -54 0 242.239167 2780

Site1158_DCS_3 786 1 0 -73 0 465.232265 2460

Site1160_DCS_1 776 1 0 -62 0 624.792008 3000

Site1166_DCS_1 789 1 0 -101 0 273.998467 2800

Site1167_DCS_1 1 0 -76 0 268.574801 3000


47/69

Using Analysis Manager we can Manage the Log processing according to the requirements of the report for both binning

data, cross Tab data, for Filtering, managing repository etc.

Click Tools> Click Analysis Manager or press Ctrl+A > Analysis Manager window will appear. There is some existing Queries and filters as

well, you can use those or edit or copy for creating new queries which can be used in analysis classic or network image or repository.


48/69


49/69

After filling those boxes and making filter if there is required then click OK, your Query will be appear in the query box, then click OK > it will

appear in the Loaded Log files Query folder at left side in attribute explorer. Right Click on it and get the workbook, you can see the statistics of

call in excel file.


50/69

Filter option can be helpful if you have big size of logs but , you need to see the specific cell or sites data on plot or on

histogram or on statistics.

Lets say we have a log file and the RxLev of that log file as below picture. And we need to see or plot only the RxLev from the

single site Site1340 to avoid redo drive test locking that site only.


51/69

GO to Tools > Analysis Manager > Click Filter>

Click New > Enter the name of the filter, for example

Filter Sector ID > Select the Attribute from the list by

which you want to filter but must be exist in the loaded

log file, for example we select Serving Sector ID and atthe bottom box put the name of the cell that you want to

see RxLev from , just write exact name of the cell

according to the cellrefs file. > Click OK > it will appear in

in the existing filters. Which is shown in next page.


52/69


53/69

We can see the RxLev only from the selected cell avoiding all other serving cell, we can now change the sell name from the

analysis manager > existing analysis > filters > edit that filter you created last time and just change the cell or sector name

at bottom box according to your requirements to see on map, but must be exact name as cellrefs file.


54/69

Click to Repository > Click Template Manager > Select New >. Repository Template Wizard will appear. Go next.


55/69

If you have more than one MS in the log file and you want to get Attributes separately than choose Separate data into

multiple logical devices. We also select this because we have 2 MS in our log file by which we are going to prepare report.

> Click Next> Select the devices that you have (better to choose a log file from the cluster logs that you are going to use

for automatic devices scanning by Actix) > after that existing MS configuration in the loaded log file will appear, you canedit them as well. I edited them as GSM & WCDMA . See next page:


56/69


57/69

Select the setting as you want, better is location as below settings. > Go Next > Click Add different Attributes for each

devices because we have GSM & WCDMA MS, so attributes must not be same. > go Next > see next page


58/69

Select the MS type, and then the attributes that we need to prepare report for both MS separately. It will look like below

picture at right side. > Click Next> see next page


59/69

Select Add different queries for each devices > Go next > Select the Queries for GSM (GSM call stat) And for WCMA (UMTS

call stat) which you created previously according to your report format requirements. > Go Next > see next page


60/69

Select Filters that you want or do not want. Here we choose no filter because we prepared queries according to our report

format and MS configuration already . GO Next > Have a overview to go back to edit or go Next to complete your repository

settings. > GO Next > Put a name to save the repository template and save it > see next page


61/69


62/69


63/69

Select the Log files from your Hard disk and in the repository you can select / add logs from different folders.. > after select

logs then click OK > Logs will be loaded at repository and you have to wait..until complete loading.


64/69


65/69


66/69

forPost Processing

by

Actix Analyzer


67/69

Most of the optimization engineer are looking for the IE s of TEMS in the actix. We can see some of the TEMS IE s which are

permitted by Actix. Lets see how can we check out the TEMS information Elements in Actix like interference , SQI etc.

Open Actix Analyzer > go

to Tools Tab > Click toPreferences > change

preferences window will

appear > go to General

Settings > TEMS > mark

the tab Allow Unfiltered

TEMS Attributes

And select the Attributes

that you want to see in

Actix Analyzer.

> After complete

preference changes click

OK> then Load the TEMS

Log files > go next page formore


68/69


69/69

Date post:	02-Jun-2018
Category:	Documents
Upload:	john-jacinto
View:	225 times
Download:	1 times

Nice PPT of Actix Training in Details for Analyzing & Creating Report for New Actix User or Mid Lev...

Documents