success lighting catalogue_1, ‘13.09
2014 series
ind
ust
ria
l lig
hti
ng
• c
om
me
rcia
l lig
hti
ng
• i
nd
ust
ria
l lig
hti
ng
• c
om
me
rcia
l lig
hti
ng
• i
nd
ust
ria
l lig
hti
ng
• c
om
me
rcia
l lig
hti
ng
• i
nd
ust
ria
l
Success Electronics & Transformer Manufacturer Sdn Bhd (200853-k)A wholly owned subsidiary of Success Transformer Corporation Berhad.
Headquarters:No. 3,5 & 7 Jalan TSB 8, Taman Industri Sungai Buloh, 47000 Sungai Buloh, Selangor Darul Ehsan, West Malaysia.t: +603-6157 2788/ 2785/ 2787 f:+603-6157 2722 / 2723 e: [email protected] w: www.success.com.my
Australia sales office (ABN:80143481958)
Nikkon Lighting Pty. Ltd.Unit 3013 Artisan Road, Seven Hills 2147 NSW, Australiat: +61296209036, +61296245845 f: +61296209037 e: [email protected] w: www.nikkonlighting.com.au
Kenya sales office:Nikkon Success Kenya Ltd.P.O. Box 27803-00100 Nairobi, Alpha Centre, Mombasa Road, Godown No. 40, Kenyat: +25420-820015 +25457-2515275 f: + 25420-820025 e: [email protected] w: www.nsk.co.ke
Singapore sales office:Nikkon Lighting & Electrical Pte. Ltd. (201117228-C)
No. 7, Kaki Bukit Road 1, #03-15 Eunos Technolink, Singapore 415937t: +6567424377 f: +6567424366 e: [email protected]
Indonesia sales office:PT Boxon Nikkon JayaindoJL Madu No. 1 Mangga Besar, Taman Sari, Jakarta 11180, Indonesiat: +62-21 6250961 f: +62-21 6250962 e: [email protected] w: www.nikkonlighting.co.id
Thailand sales office:Nikkon Lighting (Thailand) Co., Ltd317 Kamolsukosol Building, Unit 8E, 8Fl, Silom Rod, Khet Bangrak, Bangkoke: [email protected] w: www.nikkonlighting.co.th
2014 series
one way track to success
page 3
why choose Success? First class manufacturing facilities and resources. We invest considerable amount of money upgrading equipments and laboratory testing facilities, enabling us to better test the performance of our lighting and design products before releasing them into the market. In this way we ensure, and maintain quality of the highest standard. The laboratory is equipped with Goniophotometric and Spectroradiometric systems that enable us to fully test energy efficient lighting in order to comply with the GREEN ENERGY product category standard. The laboratory also has a dust chamber, water-proof tester, humidity tester and salt fog corrosion tester. Products are constantly upgraded, and new products innovated, to offer customers a wider range of lighting. The research and development team is currently looking into renewable (such as solar, pico hydro and wind) energy products and energy efficient industrial lighting products.
We are a one-stop lighting manufacturer that can provide custom-made energy efficient luminaire designs, using the skills of our well experienced staff and full state-of-the-art testing lab facilities. We use this expertise and top of the range software and equipment to provide comprehensive lighting design simulations for our customers or lighting consultants, according to their specific needs. We can simulate all kinds of designs for all kinds of situations producing lifelike renderings so that customers can see as realistically as possible what the design or area looks like.
We are an Original Design Manufacturer (ODM) – we design and manufacture products for customers under their own brands. We are an Original Equipment Manufacturer (OEM) – we manufacture products for customers according to their designs, under their own brands.
Success Electronics and Transformer Manufacturer Sdn Bhd is highly respected in the marketplace with an exemplary track record. We are committed to our customers.
Knowledgeable and professional sales team providing good customer support and after-sales service.
about us
Success Electronics & Transformer Manufacturer (SUCCESS) is a well known lighting and low-voltage transformer manufacturer based in Malaysia. It is wholly owned by Success Transformer Corporation Bhd, which is listed on Malaysia’s securities exchange, Bursa Malaysia. The company was established since 1980, with the accreditations of ISO9001:2008 Quality Management System Standards certification.
SUCCESS is the specialist in both lighting and transformers, in which the expertise lies in the design, integration, manufacture and supply of the premium quality products. Currently, SUCCESS has over 1000 distributors throughout Malaysia and export to more than 50 countries around the world. It is our intention to continue expanding our role as a reliable, dynamic and important player both in Malaysia and overseas.
We have a committed and dynamic workforce. From management through technical and Research & Development (R&D) engineers to sales and support staff, we all work as one team with the same goal in mind: Customer satisfaction. This has engendered a loyal customer base. Many of our customers are longstanding indeed, having continued doing business with us since the 1980s. Constantly forging ahead, we are dedicated to improving our products and customer service.
contentsindustrial lighting
floodlight S1500 pg 08S1501 pg 10S2000 pg 12S2019 pg 14S1538 & S2038 pg 16S2098 pg 18S2030 pg 20S3000 pg 22S3319 pg 24S4030 pg 26S7019 pg 28S8019 pg 30
highbay & lowbaySaturn series highbay pg 34DS series highbay pg 36AL series highbay pg 38AL 01000 series highbay pg 40S6128 highbay pg 42Premium T5 highbay pg 44NL series lowbay pg 46SMS IP rated lowbay pg 48
street lightingS419 pg 52S412 pg 54S438-N pg 56S159 pg 58
architectural lightingSuria wall light S1070 pg 62T8 IP65 weather proof fitting pg 64T5 IP65 weather proof fitting pg 66T8 IP66 stainless steel fluorescent fitting pg 68
lighting accessoriesHID lamp ballast pg 72Ignitor (nylon casing) pg 74Superimposed ignitor (aluminium casing) pg 76IP rated remote control gear pg 78Remote control gear pg 80Indoor remote control gear pg 82Emergency lighting module (power pack) pg 84
commercial lighting
light cast recessed luminaires-HID ME series pg 90 SO series pg 92FA series pg 93
light cast recessed luminaries- CFLPA series pg 94TE series pg 100ET series pg 102
modular recessed luminaires MA series pg 104MA spot head series pg 105
ceiling mounted KR series pg 107TA series pg 109 IS series pg 110IR series pg 112
track light and accessories XE series pg 113LE series pg 116 MO series pg 118
pendant luminaires CO series pg 120
outdoor commercial lighting
galileo landscape lightinggalileo L130701 pg 126galileo L130702 pg 127galileo L130703 pg 128galileo L130704 pg 129galileo L130705 pg 130galileo L130706 pg 131brentano bollardbrento B140802 pg 133brento B140803 pg 134brento B140804 pg 135brento B140805 pg 136
horeca, elano, calvary, fagon wall washerhoreca W100101 pg 138elano W100201, W100202 & W100203 pg 139calvary W100301 pg 139calvary W100302 pg 141fagon W100501 pg 142fagon W100502 pg 143fagon W100503 pg 144
anglo portable garden spotlightanglo P110402 & P110403 (with glare shield) pg 146
bulbous underground lightingbulbous G120601 & G20606 pg 148bulbous G120602 & G20607 pg 149bulbous G120603 & G20608 pg 150bulbous G120604 & G20609 pg 151bulbous G120605 & G20610 pg 152
lamp table pg 153
industrial lighting
page 7
S1500
order code
model lamp type lamp holder order code
S1500 SY MH 70W tubular / bulb / double ended E27 / RX7s S1500-M0070S1500 SY MH 150W tubular / bulb / double ended E27 / RX7s S1500-M0150S1500 SY HPS 70W tubular / bulb E27 S1500-S0070S1500 SY HPS 150W tubular / bulb E40 S1500-S0150
note : specifications are subject to change without prior notice
page 9
features electrical system• built-in control gear suitable for HID lamps
from 70W - 150W housing• high pressure aluminium die-cast housing reflector• high purity anodized hammered finish
aluminium reflector glass• thermal resistant tempered glass mounting bracket• steel mounting bracket coated with epoxy
powder compliance and approvals• degree of protection IEC60529:2001
dimension
photometric curve
key for standard order coding
technical data
ingress protection • IP65voltage • 220 - 240 Vac 50 / 60Hzlamp wattage • 70W - 150Wholder type • E27, E40 and RX7s ceramic lamp holdermaximum weight • 5.50kgcolour of housing • black
200292
80
364
242
ø14
ø11
820
1640
2460
3280
4100
note : photometric result tested based on 14000lm MH 150W coated bulb
0
±180
-90 90
C90
C180
C270
C0
S1500 - M 0150 capacity code : example = 150W
lamp type : S = high pressure sodium
: M = metal halide
casing model
S1501
order code
model lamp type lamp holder order code
S1501 MH 70W double ended RX7s S1501-M0070S1501 MH 150W double ended RX7s S1501-M0150S1501 HPS 70W double ended RX7s S1501-S0070S1501 HPS 150W double ended RX7s S1501-S0150
note : specifications are subject to change without prior notice* casing available in black and white colour.
page 11
85 230
430
ø10
110
dimension
photometric curve
key for standard order coding
features electrical system• built-in control gear suitable for HID lamps
from 70W - 150W housing• high pressure aluminium die-cast housing
with AKzo Nobel Interpon outdoor epoxy powder coating
reflector• high purity anodized hammered finish
aluminium reflector glass• thermal resistant tempered glass mounting bracket• steel mounting bracket coated with epoxy
powder compliance and approvals• degree of protection IEC60529:2001
technical data
ingress protection • IP65voltage • 220 - 240 Vac 50 / 60Hzlamp wattage • 70W - 150Wholder type • RX7s ceramic lamp holdermaximum weight • 5 kgcolour of housing • white & black
note : photometric result tested based on 11000lm MH 150W double ended tube
0
±180
-90
C90
C180
C270
C0
90
3180
4240
5300
S1501 - S 0150 capacity code : example = 150W
lamp type : S = high pressure sodium
: M = metal halide
casing model
S2000
order code
model lamp type lamp holder order code
S2000 SY MH 250W (2.1A) tubular E40 S2000-M0250S2000 SY MH 400W tubular E40 S2000-M0400S2000 SY HPS 250W tubular E40 S2000-S0250S2000 SY HPS 400W tubular E40 S2000-S0400
note : S2000 asymmetrical type floodlight is available upon request • specifications are subject to change without prior notice
page 13
dimension
photometric curve
key for standard order coding
features electrical system• built-in control gear suitable for HID lamps
from 250W - 400W housing• high pressure aluminium die-cast housing with AKzo Nobel Interpon outdoor epoxy
powder coating reflector• high purity anodized hammered finish
aluminium reflector glass• thermal resistant tempered glass mounting bracket• steel mounting bracket coated with epoxy
powder compliance and approvals• degree of protection IEC60529:2001
technical data
ingress protection • IP65voltage • 220 - 240 Vac 50 / 60Hzlamp wattage • 250W - 400Wholder type • E40 ceramic lamp holdermaximum weight • 9 kgcolour of housing • black
note : photometric result tested based on 32000lm MH 400W clear tube
0
±180
-90
C90
C180
C270
C0
902421.88
4343.61
7265.40
9687.20
12109.00
145420
200
500
295
ø10
S2000 Sy - M 0400 capacity code : example = 400W
lamp type : S = high pressure sodium
: M = metal halide
reflector model : Sy = symmetrical
: Asy = asymmetrical
casing model
order code
model lamp type lamp holder order code
S2019 SY MH 250W (2.1A) tubular E40 S2019-M0250S2019 SY MH 400W tubular E40 S2019-M0400S2019 SY HPS 250W tubular E40 S2019-S0250S2019 SY HPS 400W tubular E40 S2019-S0400
note : S2019 asymmetrical type floodlight is available upon request • specifications are subject to change without prior notice
S2019
page 15
dimension
photometric curve
key for standard order coding
features electrical system• built-in control gear suitable for HID lamps
from 250W - 400W housing• high pressure aluminium die-cast housing
with AKzo Nobel Interpon outdoor epoxy powder coating
reflector• high purity anodized hammered finish
aluminium reflector glass• frameless thermal resistant tempered glass mounting bracket• steel mounting bracket coated with epoxy
powder
technical data
ingress protection • IP65voltage • 220 - 240 Vac 50 / 60Hzlamp wattage • 250W - 400Wholder type • E40 ceramic lamp holdermaximum weight • 9.5 kgcolour of housing • black
145420
200
500
295
ø10
note : photometric result tested based on 32000lm MH 400W clear tube
0
±180
-90
C90
C180
C270
C0
902421.88
4343.61
7265.40
9687.20
12109.00
S2019 Sy - M 0400 capacity code : example = 400W
lamp type : S = high pressure sodium
: M = metal halide
reflector model : Sy = symmetrical
: Asy = asymmetrical
casing model
S1538 & S2038
order code
model lamp type lamp holder order code
S1538 Sy MH 70W double ended RX7s S1538 Sy-M0070S1538 Sy MH 150W double ended RX7s S1538 Sy-M0150S1538 Sy HPS 70W double ended RX7s S1538 Sy-S0070S1538 Sy HPS 150W double ended RX7s S1538 Sy-S0150 S1538 Asy MH 70W double ended RX7s S1538 Asy-M0070S1538 Asy MH 150W double ended RX7s S1538 Asy-M0150S1538 Asy HPS 70W double ended RX7s S1538 Asy-S0070S1538 Asy HPS 150W double ended RX7s S1538 Asy-S0150 S2038 Sy MH 250W tubular E40 S2038 Sy-M0250S2038 Sy MH 400W tubular E40 S2038 Sy-M0400S2038 Sy HPS 250W tubular E40 S2038 Sy-S0250S2038 Sy HPS 400W tubular E40 S2038 Sy-S0400 S2038 Asy MH 250W tubular E40 S2038 Asy-M0250S2038 Asy MH 400W tubular E40 S2038 Asy-M0400S2038 Asy HPS 250W tubular E40 S2038 Asy-S0250S2038 Asy HPS 400W tubular E40 S2038 Asy-S0400
note : specifications are subject to change without prior notice • Asy - asymmetrical reflector • Sy - symmetrical* for S1538 model, E27 lamp holder only available upon request.
S2038
S1538
page 17
dimension
photometric curve
key for standard order coding
features housing• high pressure aluminium die-cast housing
with AKzo Nobel Interpon outdoor epoxy powder coating
reflector• high purity anodized hammered aluminium
reflector glass• thermal resistant tempered glass mounting bracket• steel mounting bracket coated with epoxy
powder colour of housing• MAT RAL 9006 (Akzo Nobel) compliance and approvals• sirim general requirement & test
IEC60598-1:2003• sirim particular requirement (floodlight) IEC60598-2-5:2006
technical data
ingress protection • IP66voltage • 220 - 240 Vac 50 / 60Hzlamp wattage • 70W - 150W • 250W - 400Wholder type • RX7s / E40maximum weight • 6 kg (S1538) • 10.5kg (S2038)
128
35 110
3 x Ø11
274
S1538
255
386446
-90
note : photometric result tested based on 13500lm MH150w tube
0
±180S1538 - Sy
90 90
note : photometric result tested based on 32000lm MH400w tube
0
±180S2038 - Asy
-90
12638.26
10110.61
7582.96
5055.30
2527.65
4442.64
3554.11
2665.58
1777.06
888.53
C90
C180
C270
C0
419
S2038
399
499434
141
3818080
4 x Ø10.5Ø15
S1538 Asy - M 0070 capacity code : example = 70W
lamp type : S = high pressure sodium
: M = metal halide
reflector model : Sy = symmetrical
: Asy = asymmetrical
casing model
order code
model lamp type lamp holder order codeS2098 SY MH 250W Tubular E40 S2098 SY – M0250S2098 SY MH 400W Tubular E40 S2098 SY – M0400S2098 SY HPS 250W Tubular E40 S2098 SY – S0250S2098 SY HPS 400W Tubular E40 S2098 SY – S0400S2098 ASY MH 250W Tubular E40 S2098 ASY – M0250S2098 ASY MH 400W Tubular E40 S2098 ASY – M0400S2098 ASY HPS 250W Tubular E40 S2098 ASY – S0250S2098 ASY HPS 400W Tubular E40 S2098 ASY – S0400
note : specifications are subject to change without prior notice • Asy - asymmetrical reflector • Sy - symmetrical
S2098 - SYM
S2098
page 19
dimension
S2098
photometric curve
S2098 - sym
key for standard order coding
technical data
ingress protection • IP66 voltage • 220 - 240 Vac 50 /60Hz lamp wattage • 250W - 400W lamp holder • E40 maximum weight • 12.5 kg
features housing• High pressure aluminium die-cast housing
with AKZO Nobel Interpon outdoor epoxy powder coating.
reflector• High purity anodized polished hammered
aluminium reflector. glass• Thermal resistant tempered glass mounting bracket • Steel mounting bracket coated with epoxy
powder colour of housing• MAT RAL 9006 (Akzo Nobel) compliance and approvals• sirim general requirement & test
IEC60598-1:2003• sirim particular requirement (floodlight) IEC60598-2-5:2006
435
483
234
542469
60°90
180
3 x Ø12
58
note : photometric result tested based on 6600lm MH 70W G12 tube
±180
0
-90 902762.21
5524.42
8286.63
11048.84
13811.05
S2098 SY - M 0250 capacity code : example = 250W
lamp type : S = high pressure sodium
: M = metal halide
reflector model : Sy = symmetrical
casing model : Asy = asymmetrical
S2030
order code
model lamp type lamp holder order code
S2030 MH 250W (2.1A) tubular E40 S2030 - M0250S2030 MH 400W tubular E40 S2030 - M0400 S2030 HPS 250W tubular E40 S2030 - S0250S2030 HPS 400W tubular E40 S2030 - S0400 S2030 HPMV 250W bulb E40 S2030 - H0250S2030 HPMV 400W bulb E40 S2030 - H0400
note : specifications are subject to change without prior notice
page 21
features housing• high pressure aluminium die-cast housing
with AKzo Nobel Interpon outdoor epoxy powder coating
reflector• high purity anodized hammered aluminium
reflector glass• thermal resistant tempered glass mounting bracket• steel mounting bracket coated with epoxy
powder colour of housing• black compliance and approvals• degree of protection IEC60529:2001
technical data
ingress protection • IP65voltage • 220 - 240 Vac 50 / 60 Hzlamp wattage • 250W - 400Wholder type • E40 maximum weight • 10.0 kg
note : photometric result tested based on 32000lm MH 400W clear tube
0
±180
-90 90
note : photometric result tested based on 32000lm MH 400W clear tube
0
±180
-90 90
7046.95
9395.94
2348.98
4697.97
11744.92
S2030 - Wide beam
C90
C180
C270
C0
S2030 - Narrow beam
C90
C180
C270
C0
6786.17
9048.22
2263.06
4524.11
11310.28
452
306
405 267
150
2 x Ø10.5
Ø13
S2030
dimension
photometric curve
key for standard order coding
S2030 - S 0250 capacity code
lamp type
casing model
: example = 250W
: S = high pressure sodium: M = metal halide: H = mecury vapor
S3000
order code
model lamp type lamp holder order code
S3000 MH 1000W tubular E40 S3000-M1000S3000 HPS 1000W tubular E40 S3000-S1000accessories housing material IP rated order code
remote control gear (MH 1000W) steel c/w epoxy powder IP43 S5100 UC-M1000remote control gear (HPS 1000W) steel c/w epoxy powder IP43 S5100 UC-S1000remote control gear (MH 1000W) die-cast aluminium IP65 S5100 UA-M1000remote control gear (HPS 1000W) die-cast aluminium IP65 S5100 UA-S1000
note : specifications are subject to change without prior notice
page 23
dimension
photometric curve
accessories
key for standard order coding
IP43 IP65
features housing• high pressure aluminium die-cast housing with AKzo Nobel Interpon outdoor epoxy powder coating reflector• high purity anodized hammered finish aluminium reflector glass• thermal resistant tempered glass mounting bracket• steel mounting bracket coated with epoxy powder lamp holder• E40 lamp holder conforming to EN / VDE
standard compliance and approvals• degree of protection IEC60529:2001
technical data
ingress protection • IP65 (lamp fitting)voltage • 220 - 240 Vac 50 / 60Hzlamp wattage • MH 1000W & HPS 1000Wholder type • E40 ceramic lamp holderfloodlight maximum weight • 11.6 kgcontrol gear maximum weight • S5100-M1000 : 14 kg / S5100-S1000 : 15.5 kgcolour of housing • black
200585
380
540 ø16M8 x 20
180
360
260 180
300
S5100-UC S5100-UA
147 265
ø8 x 15 (mm) slot
232 250
180
ø10
200
363
0
±180
-90 90
C90
C180
C270
C0
7989.69
15979.38
23969.08
31958.77
39948.46
note : photometric result tested based on 85000lm MH 1000W clear tube
S3000 - S 1000 capacity code : example = 1000W
lamp type : S = high pressure sodium
: M = metal halide
casing model
S3319
order code
model lamp type lamp holder order code
S3319 MH 1000W tubular E40 S3319-M1000S3319 HPS 1000W tubular E40 S3319-S1000accessories housing material IP rated order code
remote control gear (MH 1000W) die-cast aluminium IP65 S5100 UA-M1000remote control gear (HPS 1000W) die-cast aluminium IP65 S5100 UA-S1000
note : specifications are subject to change without prior notice
page 25
note : photometric result tested based on 85000lm MH 1000W - BH / 67 clear tube
C0 C180
C90
C270 0
±180
-90 90
40079.97
8015.99
16031.99
24047.98
32063.98
dimension
photometric curve
accessories
key for standard order coding
features body frame / colour• deep draw with high purity aluminium sheet• dark grey colour reflector• high purity anodized polished aluminium
deep draw reflector glass• fixed thermal resistant tempered glass mounting bracket• steel mounting bracket coated with epoxy
powder attached with rotatable mounting bracket
lamp holder• E40 lamp holder conforming to EN / VDE
standard compliance and approvals• sirim general requirement & test
IEC60598-1:2003• sirim particular requirement (floodlight)
IEC60598-2-5:2006
technical data
ingress protection • IP66 (lamp fitting)voltage • 220 - 240 Vac 50 / 60Hzlamp wattage • MH 1000W & HPS 1000Wholder type • E40 ceramic lamp holderfloodlight maximum weight • 11 kgcontrol gear maximum weight • S5100 UA-M : 14kg / S5100 UA-S : 15.5kg
S5100-UA
232 250
180
ø10
200
363
589
520
623
576
595
45º
188180
1563
R70 R55
S3319 - M 1000 capacity code : example = 1000W
lamp type : S = high pressure sodium
: M = metal halide
casing model
S4030
order code
model lamp type lamp holder order code
S4030 MH 2000W tubular E40 S4030-M2000accessories housing material IP rated order code
remote control gear die-cast aluminium IP65 S5200 UA-M2000
note : S4030 ASY 100W is available upon request • specifications are subject to change without prior notice
page 27
dimension
photometric curve
accessories
key for standard order coding
technical data
ingress protection • IP65 (lamp fitting)voltage • 220 - 240 Vac 50 / 60Hzlamp wattage • MH 2000Wholder type • E40 ceramic lamp holderfloodlight maximum weight • 12 kgcontrol gear weight • 19.5 kgcolour of housing • black
features housing• high pressure aluminium die-cast housing with AKzo Nobel Interpon outdoor epoxy powder coating reflector• high purity anodized hammered finish aluminium reflector glass• frameless thermal resistant tempered glass mounting bracket• steel mounting bracket coated with epoxy powder rear cover• easy access to the lamp from rear without removing the front glass lamp holder• E40 lamp holder conforming to EN / VDE standard compliance and approvals• degree of protection IEC60529:2001
290510
540
490495ø16
300
S5200-UA
232 250
180
ø10
200
363
note : photometric result tested based on 180000lm MH 2000W E40 clear tube
0
±180
-90 90
20000
4000
8000
12000
16000
C90
C180
C270
C0
S4030 - M 2000 capacity code : example = 2000W
lamp type : S = high pressure sodium
: M = metal halide
casing model
S7019
order code
model lamp type lamp holder order code
S7019 MH 1000W tubular E40 S7019-M1000S7019 HPS 1000W tubular E40 S7019-S1000accessories housing material IP rated order code
remote control gear (MH 1000W) die-cast aluminium IP65 S5100 UA-M1000remote control gear (HPS 1000W) die-cast aluminium IP65 S5100 UA-S1000
note : specifications are subject to change without prior notice
page 29
dimension
photometric curve
accessories
key for standard order coding
features body frame / colour• f ull aluminium extruded through high pressure die-cast with AKzo Nobel Interpon
outdoor epoxy powder coating• dark grey colour reflector• high purity anodized polished aluminium
deep draw reflector glass• fixed thermal resistant tempered glass mounting bracket• steel mounting bracket coated with epoxy
powder attached with rotatable mounting bracket
rear cover• easy access to the lamp from the rear of the
fitting lamp holder• E40 lamp holder conforming to EN / VDE
standard compliance and approvals• sirim general requirement & test
IEC60598-1:2003• sirim particular requirement (floodlight)
IEC60598-2-5:2006
technical data
ingress protection • IP66 (lamp fitting)voltage • 220 - 240 Vac 50 / 60Hzlamp wattage • MH 1000W & HPS 1000Wholder type • E40 ceramic lamp holderfloodlight maximum weight • 11 kgcontrol gear weight • S5100-UA : 14.5 kg
S5100-UA
232 250
180
ø10
200
363
458
330
45º
ø587
623
R64
18
155163
54
R46
0
±180
-90 90
350038.18
7007.64
140015.27
210022.91
280030.54
note : photometric result tested based on 85000lm MT 1000A - BH / 67 clear tube
C0 C180
C90
C270
S7019 - S 1000 capacity code : example = 1000W
lamp type : S = high pressure sodium
: M = metal halide
casing model
S8019
order code
model lamp type lamp holder order code
S8019 MH 2000W tubular E40 S8019-M2000accessories housing material IP rated order code
remote control gear (MH 2000W) die-cast aluminium IP65 S5200 UA-M2000
note : specifications are subject to change without prior notice
page 31
features body frame / colour• full aluminium extruded through high pres-
sure die-cast with AKzo Nobel Interpon outdoor epoxy powder coating
• dark grey color reflector• high purity anodized polished aluminium
deep draw reflector glass• fixed thermal resistant tempered glass mounting bracket• steel mounting bracket coated with epoxy
powder attached with rotable mounting bracket
rear cover• easy access to the lamp from the rear of the
fitting lamp holder• E40 lamp holder conforming to EN / VDE
standard
dimension
photometric curve
accessories
key for standard order coding
technical data
ingress protection • IP66 (lamp fitting)voltage • 220 - 240 Vac 50 / 60Hzlamp wattage • MH 2000Wholder type • E40 ceramic lamp holderfloodlight maximum weight • 12 kgcontrol gear weight • 19.5 kg
518
372
45º
ø587
666
R64
18
155163
54
R46
S5200-UA
232 250
180
ø10
200
363
0
±180
-90 90
1143057.10
228611.42
457222.84
685834.26
914445.68
note : photometric result tested based on 180000lm MH 2000W clear tube
C0 C180
C90
C270
S8019 - M 2000 capacity code : example = 2000W
lamp type : S = high pressure sodium
: M = metal halide
casing model
highbay & lowbay
page 33
order code
model lamp type lamp holder order code
saturn 1 HID / CFL E27 saturn 1saturn 3 HID / CFL E27 saturn 3remote control gear lamp wattage lamp type order code
S5007-IC 70W MH / HPS S5007-ICS5008-IC 80W HPMV S5008-ICS5010-IC 100W HPS S5010-ICS5012-IC 125W HPMV S5012-ICS5015-IC 150W MH / HPS S5015-IC
note : specifications are subject to change without prior notice
saturn series
page 35
features control gear housing• high quality cold rolled steel with epoxy
powder coating reflector• polycarbonate reflector for uniform light
distribution others• E27 / E40 ceramic lamp holder
dimension
photometric curve
accessories
key for standard order coding
technical data
voltage • 220 - 240 Vac 50 / 60Hzlamp wattage • 70W - 150Wcontrol gear • MH 70W - 150W • HPS 70 - 150W • HPMV 80 - 125Wcolour of housing • light grey (control gear)
note : photometric result tested based on 13500lm MH 150W coated bulb complete with 12” PC reflector
0
±180
-90 90
5700
3420
4560
1148
2230
saturn 1 with 12” PC Reflector saturn 3 with 16” PC Reflector
ø317 ø406
±770
194
66
±901
325
66
130
saturn 2 lamp holder remote control gear
260
105
8810
219
57
12
ø5 ø8
Saturn 1 - M 070 - S5007 - IC remote control gear
capacity code : example = 70W
lamp type : S = high pressure sodium
: M = metal halide
casing model
reflector & diffuser matching table
casing model reflector type lamp type diffuser order code metal halide high pressure sodium mercury vapor 70W 150W 250W 400W 70W 150W 250W 400W 80W 125W 250W 400W
DS70150 12” PC • • • • • • - DS70150
16” PC • • • - 19” PC • • • •DS25400 22” PC • • • • DS25400 22” PC • • • -
note : others matching are available upon request • specifications are subject to change without prior notice • PC : polycarbonate - : not matching • : matching
DS series highbay
page 37
dimension
key for standard order coding
technical data
voltage • 220 - 240 Vac 50 / 60Hzlamp wattage • 70W - 400Wholder type • E27 & E40 ceramic lamp holdercolour of housing • light grey
features control gear housing• high quality cold rolled steel with epoxy
powder coating power factor correction capacitor• 100˚C aluminium casing self healing
capacitor with overpressure break action mechanism
reflector• polycarbonate reflector for uniform light
distribution polycarbonate diffuser• optional diffuser can be mounted onto the
reflector to give better luminance control others• ceramic lamp holder and thermal resistant
fibre glass wire
photometric curve
installation diagram
note : photometric result tested based on 36000lm MH 400W coated bulb come with 22” PC refractor
0
±180
-90 90
9417.75
5650.65
7534.20
1883.55
3767.10
Refractor & diffuser type: 12 = 12” PC reflector without diffuser 22d = 22” PC reflector with diffuser
capacity code : example = 250W
lamp type : M = metal halide S = high pressure sodium
H = mercury vapor
casing model
DS70150
b
a
c
DS25400
a b
c
de
f
thumb screw
12” PC Prismatic Reflector 16” PC Prismatic Reflector 19” PC Prismatic Reflector 22” PC Prismatic Reflector
ø80
ø110
ø5 ø9
26
16”, 19” & 22” refractor mounting hole
a : close the front cover b : tighten 4 of the pan head screw c : tighten 3 of the pan head screw and let it until 1/4 finish d : fix the reflector to the highbay e : rotate the reflector properly f : tighten the mounting screw to secure the reflector
a : close the front cover b : tighten 4 of the pan head screw c : tighten 3 of the pan head screw and let it until 1/4 finish d : fix the reflector to the highbay e : rotate the reflector properly f : tighten the mounting screw to secure the reflector
matching table
casing model reflector type lamp type visor guard metal halide high pressure sodium mercury vapor 70W 150W 250W 400W 70W 150W 250W 400W 80W 125W 250W 400W
N412G • • • • • • • • • • • N712G • • • • • 6407 • • • • • • • • • - •
AL70150 / RAL8718 • • • • • AL25400
RAL15MFWR • • • • • • • • • • • RAL18MFWR • • • • •
note : specifications are subject to change without prior notice - : not matching • : matching
attachment
visormodel dimension (mm) weight (kg) thickness (mm) order code
N412G glass visor ø380 0.45 5 N412G glassN712G glass visor ø465 2.20 5 N712G glassRAL8718 glass visor ø465 2.20 5 VGAL8718RAL15MFWR glass visor ø401 1.70 5 VGAL15MFWR RAL18MFWR glass visor ø476 2.40 5 VGAL18MFWR
AL series highbay
page 39
dimension
reflectormodel dimension (mm) weight (kg) a bN412G 315 ø390 0.4N712G 405 ø465 0.76407 245 ø400 0.4RAL8718 335 ø470 0.6RAL15MFWR 286 ø401 0.5RAL18MFWR 335 ø476 0.8
key for standard order coding
technical data
voltage • 220 - 240 Vac 50 / 60Hzlamp wattage • 70W - 400Wholder type • E27 & E40 ceramic lamp holdercolour of housing • light grey
features control gear housing• high quality cold rolled steel with epoxy
powder coating power factor correction capacitor• 100˚C aluminium casing self healing
capacitor with overpressure break action mechanism
reflector• high purity anodized polished aluminium
reflector tempered glass / safety guard• optional visor and guard can be mounted
onto the reflector for safety purposes others
• ceramic lamp holder and thermal resistant fibre glass wire
photometric curve
installation diagram
a : close the front coverb : tighten 4 of the pan head screw c : fix the ripper with the reflectord : rotate the ripper properly to secure the reflector
a : close the front coverb : tighten the thumb screwc : fix the ripper with the reflectord : rotate the ripper properly to secure the reflector
d
c
b
a
AL70150Refractor & diffuser type: 12 = 12” PC reflector without diffuser 22d = 22” PC reflector with diffuser
capacity code : example = 250W
lamp type : M = metal halide S = high pressure sodium
H = mercury vapor
casing model
8718 + VGAL 8718
order code
casing model lamp wattage lamp type weight (kg) order code
AL 01000 highbay MH 700W bulb 12.5 AL 01000 - M0700
AL 01000 highbay MH 1000W bulb 14.0 AL 01000 - M1000
AL 01000 highbay HPMV 700W bulb 12.0 AL 01000 - H0700
AL 01000 highbay HPMV 1000W bulb 13.5 AL 01000 - H1000reflector model weight (kg) order code
AL reflector RAL22MFWR 1.5 RAL22MFWRattachment dimension (mm) thickness (mm) weight (kg) order code
Tempered glass visor ø570 5 3.2 VGAL22MFW
note : specifications are subject to change without prior notice
AL 01000 series highbay
page 41
dimension
photometric curve
key for standard order coding
technical data
voltage • 220 - 240 Vac 50 Hz / 60Hzlamp wattage • 700W - 1000Wholder type • E40 ceramic lamp holdercolour of housing • light grey
features control gear housing• high quality cold rolled steel complete with
epoxy powder coating reflector• high purity anodized polished aluminium
reflector tempered glass• optional visor can be mounted onto the
reflector for safety purposes others• ceramic lamp holder and thermal resistant
fiber glass wire
installation diagram
428
ø 579
ø71
ø89
ø6 ø12
27
180 180 180
460 460
180
RAL 22MFWR 22” AL reflector
reflector mounting hole
AL 01000 casing
0
±180
-90 903601.43
7202.86
10804.29
14405.72
18007.15
note : photometric result tested based on 87000lm MH 1000W coated bulb c/w RAL22MFWR 22” Aluminium Reflector
A
B
c
D
F
E
A. close the front cover
B. tighten the cover screw
C. tighten the mounting screw to allow spacing to fix the reflector
D & E : fix and turn the reflector to the highbay casing
F: tighten the screw to secure the reflector
AL01000 - M 1000 - RAL22MFWR + VGAL22MFWattachment (visor model)
reflector model
capacity code : example = 1000W
lamp type : S = high pressure sodium
: M = metal halide
: H = mercury vapor
casing model
S6128
order code
description weight (kg) order code
housing COPA - ST 1 x MH 250W 5.1 COPA-STM25 COPA - ST 1 x MH 400W 6.1 COPA-STM40 COPA - ST 1 x HPS 250W 6.1 COPA-STS25 COPA - ST 1 x HPS 400W 7.2 COPA-STS40 COPA - ST 1 x HPMV 250W 5.1 COPA-STH25 COPA - ST 1 x HPMV 400W 5.6 COPA-STH40
reflectors 16” PC prismatic reflector 1.1 RPC16 22” PC prismatic reflector 2.0 RPC22 15” AL multi facet wide beam reflector 0.5 RAL15MFW 18” AL multi facet wide beam reflector 0.8 RAL18MFW
attachments 16” PC prismatic diffuser 0.5 DPC16 22” PC prismatic diffuser 1.2 DPC22 15” AL multi facet wide beam reflector glass cover 1.7 VGAL15MFW 18” AL multi facet wide beam reflector glass cover 2.4 VGAL18MFW
note : additional safety guard is available upon request • specifications are subject to change without prior notice • PC : Polycarbonate • AL : Aluminium
page 43
features gear box• high pressure aluminium die-cast housing
with AKzo Nobel Interpon outdoor epoxy powder coating
reflector• high purity aluminium reflector or polycar-
bonate reflector diffuser / visor / safety guard• optional PC diffuser, tempered glass visor and guard can be mounted onto the reflector for safety purpose installation / mounting• suitable for single point suspension on
wire and chain compliance and approvals• sirim general requirement & test
IEC60598-1:2003• sirim particular requirement
IEC60598-2-5:2006
dimension
accessories
photometric curve
key for standard order coding
technical data
ingress protection(IP) • IP23 matching with PC refractor • IP65 matching with AL reflector & visorvoltage • 220 - 240 Vac 50 / 60 Hzlamp wattage • 250W - 400Wholder type • E27 & E40 ceramic lamp holdercolour of housing • dark grey
128
64
ø8
copa - ST highbay housing
note : copa - MB highbay is available upon request ST : standard MB : matching bracket
copa - MB highbay housing
168230204
253
note : photometric result tested based on 19000lm MH 250W coated bulb complete with 15” AL reflector
45 45
320
90 90
240
cd / 1000klm
80
160
ø476ø401
335286
18” wide beam multi facet AL reflector15” wide beam multi facet AL reflector
16” PC Prismatic reflector 22” PC Prismatic reflector
ø406 ø568
325418
COPA - STM25 - M 0250 - RPC16 + DPC16attachment (visor model)
reflector model
capacity code : example = 250W
lamp type : S = high pressure sodium
: M = metal halide
: H = mercury vapor
casing model
premium T5 highbay
order code
casing model lamp type lamp holder weight order code
T5 654 fluorescent highbay 6 x T5 54W HO constant G5 7.6 kg T5 654 6 x 54WT5 654 fluorescent highbay 4 x T5 54W HO constant G5 7.4 kg T5 654 4 x 54W T5 454 fluorescent highbay 4 x T5 54W HO constant G5 4.6 kg T5 454 4 x 54WT5 454 fluorescent highbay 2 x T5 54W HO constant G5 4.4 kg T5 454 2 x 54Wattachment wattage dimension weight order code
T5 654 acrylic cover 6 x 54W 456 x 1222 mm 2.0 kg 654 6 x 54W acrylic coverT5 654 acrylic cover 4 x 54W 456 x 1222 mm 2.0 kg 654 4 x 54W acrylic coverT5 454 acrylic cover 4 x 54W 250 x 1222 mm 1.2 kg 454 4 x 54W acrylic coverT5 454 acrylic cover 2 x 54W 250 x 1222 mm 1.2 kg 454 2 x 54W acrylic cover
page 45
features housing• 0.5mm iron sheet with high quality powder
coated end cap• 0.8mm iron sheet with quality powder
coated reflector• Alanod specular MIRO04 with 95%
reflection lamp holder• G5 lamp holder conforming to EN / VDE
standard Osram Luminax T5
• fluorescent lamps provide unbeatable amounts of light and save enormous amount of money and electricity
Osram Quicktronic• electronic control gear provide more stable
& powerful output heat resistant cable• increase the T5 highbay quality protective cover• optional transparent lens
applications warehouse• excellent lumen maintenance prevents
light levels from dropping to unsafe or unacceptable levels and higher lumens per watt lower energy costs
industrial environment• industrial suspended luminaires for
applications where the mounting height exceeds 5.5m. An energy efficient replacement for the discharge highbay that suits most applications where large areas are lit
manufacturing areas• provides significant energy savings,
improved color recognition and longer maintenance cycles for manufacturer facilities. Improvements in lamp and ballast technology create a better alternative to HID systems
hangers• high fixture efficiency and optical control
deliver the peak candlepower needed to produce desired illumination levels from high mounting heights.
dimension
photometric curve
key for standard order coding
technical data
voltage • 220 - 240 Vac 50 / 60 Hzlamp wattage • 2 x 54W • 4 x 54W • 6 x 54Wholder type • G5colour of housing • white
T5 654 - 6 x 54W
lamp type
casing model
matching table
model lamp type metal halide high pressure sodium mercury vapor 70W 150W 250W 400W 70W 150W 250W 400W 80W 125W 250W 400W
NL 150-RMS • • • • • •NL 400-RMS • • • • • •NL 150-SMS • • • • • •NL 400-SMS • • • • • •NL 150-SMR • • • • • •NL 400-SMR • • • • • •
RMS : recessed mount square • SMS : surface mount square • SMR : surface mount rectangularnote : specifications are subject to change without prior notice
NL series lowbay
page 47
features electrical system• built-in control gear suitable for HID lamp
from 70W - 400W with well ventilated control gear compartment
reflector• high purity aluminium reflector with
hammered / clear polished surface glass• thermal resistant tempered glass others• ceramic lamp holder and thermal resistant
fibre glass wire
0
±180
-90 901280
2520
3280
5040
5300
note : photometric result tested based on 19000lm MH 250W coated bulb
NL400 RMS - M 0250capacity code : example = 250W
lamp type : M = metal halide S = high pressure sodium H = mercury vapor
model
dimension
model width depth height opening holeNL 150-RMS 400 mm 150 mm 400 mm 345 x 345 mmNL 400-RMS 500 mm 230 mm 500 mm 420 x 420 mmNL 150-SMS 345 mm 150 mm 345 mm -NL 400-SMS 420 mm 230 mm 420 mm -NL 150-SMR 250 mm 150 mm 430 mm -NL 400-SMR 320 mm 195 mm 600 mm -
photometric curve
key for standard order coding
technical data
voltage • 220 - 240 Vac 50 / 60Hzlamp wattage • 70W - 400Wholder type • E27 / E40 ceramic lamp holdercolour of housing • white
w
NL SERIES SMS NL SERIES RMS NL SERIES SMR
w wd d d
h h h
SMS IP rated Lowbay
order code
casing model lamp type lamp holder order codeSMS IP Lowbay MH 250W Tubular E40 SMS IP Lowbay – M0250SMS IP Lowbay MH 400W Tubular E40 SMS IP Lowbay – M0400SMS IP Lowbay HPS 250W Tubular E40 SMS IP Lowbay – S0250SMS IP Lowbay HPS 400W Tubular E40 SMS IP Lowbay – S0400SMS IP Lowbay HPMV 250W Bulb E40 SMS IP Lowbay – H0250SMS IP Lowbay HPMV 400W Bulb E40 SMS IP Lowbay – H0400
note : specifications are subject to change without prior notice
page 49
dimensions
photometric
key standard for order coding:
technical data
Ingress protection (IP) • IP 65 voltage • 220 ~ 240 Vac 50 / 60Hz lamp wattage • 250 ~ 400W holder type • E40 colour of housing • white
features:
material• high quality cold rolled steel with epoxy
powder coating electrical system• built – in control gear suitable for HID lamp
from 250W – 400W reflector• high purity aluminium reflector with
hammered surface glass• thermal resistant tempered glass gasket• high durability silicon gasket other• ceramic lamp holder and thermal resistant fibre glass wire
dimension :
420
420
271
236
key for standard order coding : SMS IP LOWBAY - M 0400
lamp type : M = metal halide S = high pressure sodium H = mecury vapor
casing model
capacity code : example = 400W
0
±180
-90 902041.43
4082.87
6124.30
8165.73
10207.16
`
note : photometric result tested based on 36000lm MH 400W tubular
street lighting
page 51
matching table
housing model lamp type lamp holder casing dimension (mm) weight (kg) order code high pressure sodium a b c d 70W 150W 250W 400W
S419-70 • E27 500 200 136 50 5.0 S419-70-S0070
S419-150 • • E27&E40 639 269 170 50 7.5 S419-150-S0150
S419-250 • • E40 764 302 189 65 10.5 S419-250-S0250
S419-400 • • E40 880 354 260 65 15.5 S419-400-S0400
note:metalhalide&mercuryvaporstreetlanternareavailableuponrequest•specificationsaresubjecttochangewithoutpriornotice
S419
page 53
dimension
photometric curve
key for standard order coding
technical data
ingressprotection•IP66(lampcompartment)&IP66(gearcompartment)insulationclass•classI(note:classIIisavailableuponrequest)voltage•220-240Vac50/60Hzlampwattage•70W-400Wholdertype•E27&E40ceramicholdermaximumweight•15.5kgdesignedstandards•IEC60598-2-3spigotsize•ø50mm-S419-70&S419-150 ø65mm-S419-250&S419-4000
posttop sideentry
features electrical system•built-incontrolgearsuitableforHIDlampsfrom70W-400W
housing•fullaluminiumextrudedthroughhighpressuredie-castwithAKzo Nobel Interpon outdoor
epoxypowdercoating glass bowl•thermalresistanttemperedglassbowl reflector•deepdrawhighpurityanodizedaluminiumreflector spigot•standardspigot:7°suitableforsideentrymounting&post-topmounting(uponrequest)
•customizedspigot:0°(UponRequest)onlysuitableforsideentrymounting compliance and approvals•sirimgeneralrequirement&test IEC60598-1:2003•sirimparticularrequirement (streetlantern) IEC60598-2-3•TUVphotometryCIE121:1996 CIE70:1987•CEmarking•TUVtypetest EN55015:2006+A12007 EN61547:1995+A1:2000EN61000-3-2:2006 (classc) EN61000-3-3:1995 +A1,:2001+A2,:2005 IEC60598-2-3:2002 EN60598-2-3:2003
a
d
bc
C0 C180
C90
C270 Polar diagram : cd / 1000 lumens
0
-90 90
89.15
178.30
267.44
356.59
445.74
note : photometric result tested based on 48000lm HPS 400W clear tube
capacity code : example = 150W
lamp type : S = high pressure sodium
housing model
matching table
casing model lamp type lamp holder order code
S412-150 HPS 70W tubular E27 S412-150-S0070S412-150 HPS 100W tubular E40 S412-150-S0100S412-150 HPS 150W tubular E40 S412-150-S0150S412-150 MH 70W tubular E27 S412-150-M0070S412-150 MH 150W tubular E27 S412-150-M0150S412-250 HPS 250W tubular E40 S412-250-S0250 S412-250 MH 250W tubular E40 S412-250-M0250
note:specificationsaresubjecttochangewithoutpriornotice
S412
page 55
dimension
photometric curve
key for standard order coding
technical data
ingressprotection•IP66(lampcompartment)&IP54(gearcompartment)insulationclass•classIvoltage•220-240Vac50/60Hzlampwattage•70W-250Wholdertype•E27&E40ceramiclampholdermax.weight•S412-150(6.5kg)•S412-250(8.80kg)designedstandard•IEC60598-2-3spigotsize•S412-150(ø42-ø50mm)•S412-250(ø48-ø60mm)
features electrical system•built-incontrolgearsuitablefor HIDlampfrom70W-250W body frame•fullaluminiumextrudedthrough highpressuredie-castwithAKzo Nobel Interponoutdoorepoxypowdercoating glass bowl•thermalresistanttemperedglassbowl reflector•deepdrawhighpurityanodized aluminiumreflector spigot•suitableforsideentrymounting epoxy paint•lightgrey compliance•IEC60598-2-3:1997 •IEC60598-1:2003
C0 C180
C90
C270
note : photometric result tested based on 27500lm HPS 250w Clear Tube
note : photometric result tested based on 14500lm HPS / MH 150w Clear Tube
0
±180
-90 903064.62
6129.24
9193.85
12258.47
15323.09
0
±180
-90 901533.46
3066.95
4600.39
6133.86
7667.32
capacity code
lamp type : S = high pressure sodium
: example = 150w
M = metal halide
casing model
S412-150-S 0150
200
697 590
327
S412-250W
172
557 465
200
S412-150W
S438-N
matching table
housing model lamp type lamp holder order codeS438-N HPS 150W tubular E40 S438-N-S0150S438-N HPS 250W tubular E40 S438-N-S0250S438-N MH 250W tubular E40 S438-N-M0250
note:specificationsaresubjecttochangewithoutpriornotice
page 57
features electrical system•built-incontrolgearsuitableforHIDlampsfrom150W-250W
body frame•fullaluminiumextrudedthroughhighpressuredie-castwithAKzo Nobel Interpon outdoorepoxypowdercoating
glass bowl•thermalresistanttemperedglassbowl reflector•deepdrawhighpurityanodizedaluminiumreflector
spigot•suitableforsideentrymounting compliance and approvals•sirimgeneralrequirement&testIEC60598-1
•sirimparticularrequirement(streetlantern)IEC60598-2-3
ø52
660
300 180
dimension
photometric curve
key for standard order coding
technical data
ingressprotection•IP66(lampcompartment)&IP54(gearcompartment)insulationclass•class1voltage•220-240Vac50/60Hzlampwattage•150W-250Wholdertype•E27&E40ceramicholdermaximumweight•8.8kgdesignedstandards•IEC60598-2-3spigotsize•ø42mm-ø48mm
capacity code : example = 150W
lamp type : M = metal halide
S = high pressure sodium
H = mercury vapor
housing model
note : photometric result tested based on 27000lm HPS 250W clear tube
C0 C180
C90
C270 0
±180
-90 903541.92
7083.84
10625.77
14167.69
17709.61
order code
casing model lamp type lamp holder order code
S159 MH 70W tubular / bulb E27 S159-M0070S159 MH 150W tubular / bulb E27 S159-M0150S159 HPS 70W tubular / bulb E27 S159-S0070S159 HPS 150W tubular E40 S159-S0150S159 HPMV 125W bulb E27 S159-H0125
note:specificationsaresubjecttochangewithoutpriornotice
S159
page 59
features electrical system•built-incontrolgearsuitablefor HIDlampsfrom70W-150W housing•fullaluminiumextrudedthrough highpressuredie-castwithAKzo Nobel Interponoutdoorepoxypowdercoating glass bowl•thermalresistantglassbowl reflector•anodizedaluminiumreflector spigot•suitableforsideentrymounting
dimension
photometric curve
key for standard order coding :
technical data
ingressprotection•IP66(lampcompartment)&IP54(gearcompartment)insulationclass•classIvoltage•220-240Vac50/60Hzlampwattage•70W-150Wholdertype•E27&E40ceramiclampholdermaximumweight•5.5kgdesignedstandards•IEC60598-2-3spigotsize•ø50mm
0
±180
-90 901424.21
2848.42
4272.63
5696.84
7121.05
note : photometric result tested based on 14500lm HPS 150W clear tube
C0 C180
C90
C270
529 245
242
3 4
1 Ø50
capacity code
lamp type : M = metal halide
: example = 70W
S = high pr essur e sodium H = mer cury vapor
casing mode l
architectural lighting
page 61
order codes
model lamp type lamp holder ordering code
S1070 empty body E27 S1070-EB S1070 MH70W tubular/bulb E27 S1070-M-0070 S1070 HPS 70W tubular/bulb E27 S1070-S-0070 S1070 HPMV 80W bulb E27 S1070-H-0080 S1070 HPMV 125W bulb E27 S1070-H-0125S1070 CFL 2 x 26W tubular G24d-3 S1070-C-0226S1070 CFL 2 x 18W tubular G24d-2 S1070-C-0218
note:•EB=emptybody•specificationsaresubjecttochangewithoutpriornotice
suria wall light S1070
page 63
features Body is made of die - cast aluminium. The diffuseris made of clear injection moulded
polycarbonate with computer designed internal prism to provide a uniform light distribution in all directions. Via stainless steel screws system, the diffuser can be opened, but remains hingedon the body. The reflector is made of high purity anodized aluminium in order to maximize light output and efficiency.
application •parkinglot•shoppingcenter•parks•exteriorwallofbuildingsandanycommercialofarchitecturalwalls
dimension
front view side view back view
photometric curve
key for standard order coding
technical data
ingressprotection•IP65voltage•220-240Vac50/60Hzlamptype•CFLlamp&HIDlamp
capacity code : example = 125W
lamp type : M = metal halide : S = high pressure sodium : H = mercury vapor : C = compact fluorescent
casing model
S1070 H - 0125
note : photometric result tested based on 5800lm HPS 70w coated bulb
0
±180
-90 90
914.04
182.81
365.62
548.42
731.23
265 200185
310 239
order codes
model no. of lamp fitting dimension carton dimension weight (kg) qty/carton l lf w h l w h
N118 1x18W 660 445 100 107 690 230 450 12.4 10N218 2x18W 660 445 150 107 690 340 360 13.5 8N136 1x36W 1265 835 100 107 1290 230 275 13.5 6N236 2x36W 1265 835 150 107 1300 340 350 12.6 4
note:IP65weatherprooffittingwithfluorescentlamp58Wisavailableuponrequest•specificationaresubjecttochangewithputpriornotice•lf:mountingholepitch
T8 IP65 weather proof fitting
page 65
l w
lf
h
features housing•manufacturedwithstrongpolycarbonatebodyandinjectedtransparentpolycarbonatediffuser
reflector•steelplatecoatedwithepoxypowder fastening latch•stainlesssteelclip gasket•highqualityinsulationrubbergasketfor watertightsealpurpose IP rating•gearcompartment•lampcompartment compliance and approvals•sirimgeneralrequirement&test IEC60598-2-1:1997•sirimparticularrequirement IEC60598-1:2006
application •parkinglot•shoppingcenter•parks•exteriorwallofbuildingsandanycommercialofarchitecturalwalls
photometric curve
dimension
note : photometric result tested based on 2 x 36w fluorescent tube
0
±180
-90 90147.95
295.90
443.86
591.81
739.76
T5 IP65 weather proof fitting
page 67
photometric curve
dimension
model no. of lamp fitting dimension (mm) carton dimension (mm) weight l w h l w h
N114 1x14W 608 100 80 623 105 87 0.9N214 2x14W 608 100 80 623 105 87 1.0N128 1x28W 1208 57 80 1223 64 85 1.2N228 2x28W 1208 100 80 1223 105 87 1.8
note:specificationsaresubjecttochangewithoutpriornotice
0
±180
-90 9029.13
58.25
87.38
116.50
145.63
note : photometric result tested based on 1200lm 14W T5 flourescent lamp
h
h h
h
l
l w
l
l w
N114 / N214
N128 / N228
features housing•polycarbonate diffuser•injectedtransparentpolycarbonatediffuser reflector•steelplatecoatedwithwhiteepoxypowder fastening latch•stainlesssteelclip
applications
•distillationplants•boilerrooms•coldstoragerooms•residentialareas•garages
T8 IP66 stainless steel fluorescent fitting
page 69
features housing•304stainlesssteel 306stainlesssteelavailableuponrequest diffuser•thermalresistanttemperedglass fastening latch•stainlesssteelclip
application •parkinglot•shoppingcenter•parks•exteriorwallofbuildingsandanycommercialofarchitecturalwalls
model no. of lamp fitting dimension carton dimension weight (kg) l lf w h l w h
S8118 1x18W 705 495 135 75 770 160 140 2.5S8218 2x18W 705 495 195 75 770 220 140 5.0S8136 1x36W 1305 1095 135 75 1365 160 140 3.5S8236 2x36W 1305 1095 195 75 1365 220 140 6.5
note:IP66stainlesssteelfluorescentfittingwithfluorescentlamp58Wisavailableuponrequest•specificationsaresubjecttochangewithputpriornotice•lf:mountingholepitch
l
lf
top view
front view
top view
S8118 / S8218
S8236 / S8136
front view
l
lf
w
w
h
h
photometric curve
dimension
note : photometric result tested based on 2 x 36w fluorescent tube
0
±180
-90 90149.72
299.44
449.17
598.89
748.61
lighting accessories
page 71
HID lamp ballast
page 73
features rate supply voltage•220V-240V/415V50Hz/60Hz max. permissible temperature rise (∆t)•70-85ºC(∆t) rated max. operation temperature (tw)•130ºC insulation class•classF manufacturing standard•IEC61347-2-9:2003,IEC61347-1:2003 &IEC60923:2008 accreditations and certifications•international:CEmarking•domestic:SIRIM,TNB,JKR,SESCO
dimension
wiring diagram
L
REDIGNITOR YEL
BLK
3 terminal ballast (MH & SON)pulse ignitor
zH05
V042 - V022
PM
AL
N
C
BALLASTzH05
V042 - V022
L
REDIGNITOR YEL
BLK
2 & 3 Terminal Ballast (MH & SON)superimposed ignitor
PM
AL
N
C
BALLASTzH05
V042 - V022
L
2 terminal ballast (HPMV Only)
PM
AL
N
C
BALLAST
technical data
model capacity load power tw (ºC) t (ºC) capacitor watt dimension type weight (W) current factor (µF) loss (mm) (kg) (A) (pf.) (W) a b c d e
sodium/ 70 0.98 0.38 130 70 10 12 96 87 56 70 70 A 1.40metalhalide 100 1.20 0.43 130 70 15/16 15 96 87 56 70 70 A 1.45 150(LT) 1.80 0.40 130 70 20 18 120 106 56 70 70 A 2.39 250 3.00 0.42 130 70 30 25 110 102 82 99 85 A 3.88sodium 400 4.40 0.44 130 70 50 30 142 132 82 99 93 A 4.30 1000 10.30 0.42 130 70 100 74 218 158 95 133 114 B 12.0metalhalide 250 2.13 0.52 130 70 20 22 120 106 56 70 70 A 2.45 400 3.50 0.51 130 70 30 30 110 102 82 99 85 A 3.72 1000 9.00 0.52 130 70 70 53 185 177 82 100 93 A 10.80 2000 15.60 0.52 130 85 115 122 190 160 112 152 130 C 14.72 2000(415V) 9.50 0.49 130 75 50 130 190 160 112 152 130 C 15.2mercury 80 0.80 0.48 130 70 10 10 96 87 56 70 70 A 1.32 125 1.15 0.54 130 70 10 15 96 87 56 70 70 A 1.40 250 2.15 0.54 130 70 15/16 22 110 102 82 99 85 A 2.72 400 3.25 0.54 130 70 25/30 24 110 102 82 99 85 A 3.28 700 5.60 0.50 130 70 50 35 185 177 82 100 93 A 6.40 1000 7.00 0.60 130 75 50 37 185 177 82 100 93 A 7.52
note:specificationsaresubjecttochangewithoutpriornotice
a
a
a b
side view
type A
type C
type B
top view
side view top view
side view top view
b
b
e
e
c
c
d e d
d
ignitor (nylon casing)
order code
model ignitor type lamp type order code
9000PI pulse MH 250 - 2000W / HPS 150 - 1000W 9000PISP 9003 superimposed MH / HPS 70W - 400W SP 9003SP 9006 superimposed MH / HPS 70W - 150W SP9006
for domestic marketorder code
model ignitor type lamp type order code
SQ 9003 superimposed MH / HPS 70W - 400W SQ 9003
note:specificationsaresubjecttochangewithoutpriornotice
page 75
features main voltage•220V-240V50Hz/60Hz single point fixing•nyloncasingwithM8fastening maintenance free•fullyelectroniccontrol manufacturing standard•MSIEC61347-1:2003,MSIEC61347- 2-1:2003&MSIEC60927:2003 accreditations and certifications•international:CEmarking•domestic:SIRIM
dimension
wiring diagram
technical data
model input voltage (V) frequency ignition voltage max housing weight (kg) min operating temperature temperature
9000PI 220-240 50/60Hz 4.0-5.0KV 90ºC 0.076 -30ºCSP9003 220-240 50/60Hz 3.5-4.5KV 85ºC 0.13 -30ºCSP9006 220-240 50/60Hz 3.5-3.8KV 90ºC 0.06 -30ºC
for domestic marketmodel input voltage (V) frequency ignition voltage max housing weight (kg) min operating temperature temperature
SQ9003 220-240 50/60Hz 3.5-4.5KV 85ºC 0.130 -30ºC
32 36 46
30
64 74 92
33 39
SP9006 SP9003 / SQ9003 9000PI
BALLAST
L
CB
N
LpSUPER IMPOSED IGNITOR
Superimposed ignitor
SP9003 / SP9006 / SQ9003 9000PI
LAM
P
LAM
P
N
Pulse ignitor
BALLAST
L
CB
N
N
PULSEIGNITOR
order code
model ignitor type timer protection suitable lamp type IP rated order code
SP 9008 superimposed - MH & HPS 100W - 400W IP65 SP 9008SP 9008T superimposed cut off MH & HPS 100W - 400W IP65 SP 9008TSP 9009 superimposed - HPS 1000W & MH 1000W - 2000W IP65 SP 9009SP 9011 superimposed - HPS 1000W & MH 1000W - 2000W IP65 SP 9011
note:specificationsaresubjecttochangewithoutpriornotice
superimposed ignitor (aluminium casing)
page 77
dimension
wiring diagram
features main voltage•220V-240V50Hz/60Hz single point fixing•aluminiumcasingwithM8fastening maintenance free•fullyelectroniccontrol timer cut-off•abletodetectlampfailureorendof lamplife manufacturing standard•IEC60926&IEC60927 accreditations and certifications•international:CEmarking•domestic:SIRIM,TNB,JKR,SESCO
b
M8 x 10
top view
bottom viewfront view
a
Superimposed ignitor
240V
BALLAST
LL
CB
N
LpIGNITOR
PM
AL
N
technical data
ignitor model input frequency ignition voltage max housing min operating weight (kg) diameter length voltage (V) temperature temperature b a
SP9008 220-240 50/60Hz 2.8-5.0KV 105ºC -30ºC 0.14 36mm 95mmSP9008T 220-240 50/60Hz 2.8-5.0KV 105ºC -30ºC 0.14 36mm 120mmSP9009 220-240 50/60Hz 3.0-4.0KV 105ºC -30ºC 0.45 55mm 120mmSP9011 380-415 50/60Hz 4.0-5.0KV 105ºC -30ºC 0.32 55mm 92mm
IP rated remote control gear
order code
model lamp watt lamp type IP rated order code
S5100 - UA 1000W MH / HPS / HPMV IP65 S5100 - UAS5150 - UA 1500W MH IP65 S5150 - UAS5200 - UA 2000W MH IP65 S5200 - UA
note:specificationsaresubjecttochangewithoutpriornotice
page 79
features housing•highpressurealuminiumdie-casthousing withAKzo Nobel Interponoutdoorepoxy powdercoating
dimension
key for standard order coding
technical data
ingressprotection•IP65voltage•220-240Vac50Hz/60Hzlampwattage•1000W-2000Wcolourofhousing•black
capacity code : example = 2000W
lamp type : M = metal halide : S = high pressure sodium : H = mercury vapor
housing material : A = die-cast aluminium : C = cold rolled steel
usage : U = universal
casing model
S5200 U A -M 2000
S5100-UA - S5200-UA
232 250
180
ø10
200
363
remote control gear
order code
model lamp watt lamp type IP rated order code
S5100 - UC 1000W MH / HPS / HPMV IP43 S5100 - UCS5025 - OC 250W MH / HPS / HPMV IP43 S5025 - OCS5040 - OC 400W MH / HPS / HPMV IP43 S5040 - OC
note:specificationsaresubjecttochangewithoutpriornotice
page 81
features housing•highqualitycoldrolledsteelcompletewithepoxycoating
dimension
key for standard order coding
technical dataingressprotection•IP43voltage•220-240Vac50Hz/60Hzlampwattage•250W-1000Wcolourofhousing•S5100-UC-black S5025/S5040-lightgrey
capacity code : example = 1000W
lamp type : M = metal halide : S = high pressure sodium : H = mercury vapor
housing material : A = high pressure die-cast aluminium : C = cold rolled steel
usage : O = outdoor : U = universalcasing model
S5100 U C -M 1000
S5100-UC S5025 - S5040 -OC
260 180
300
315
350
147 140 140265
ø8 x 15 (mm) slot
order code
model lamp watt lamp type order code
S5035 - IC 35W MH / HPS / HPMV S5035 - IC
S5007 - IC 70W MH / HPS / HPMV S5007 - IC
S5015 - IC 150W MH / HPS / HPMV S5015 - IC
note:specificationsaresubjecttochangewithoutpriornotice
indoor remote control gear
page 83
dimension
applicable lamp type
brand lamp typePhilips CDM Master Color E27 par bulb, G12 single ended, RX7s double endedGE Constant Color E27 par bulb, G12 single ended, RX7s double endedOsram POWERBALL E27 par bulb, G12 single ended, RX7s double endedEYE CERA ARC / COLOR ARC E27 par bulb, G12 single ended, RX7s double ended
key for standard order coding
technical data
voltage•220-240Vac50/60Hzlampwattage•HID35W-150Wcolourofhousing•lightgrey
features electrical system•remotecontrolgearsuitableforceramicHIDlampsfrom35W-150Wwithventilatedcontrolcompartment
housing•epoxypowdercoatedbodytoincreasethereliabilityoftheenclosure
remote control gear
10
105
57
12
270
219
88
ø5
ø8
capacity code : example = 150W
lamp type : M = metal halide : S = high pressure sodium : H = mercury vapor
housing material : C = cold rolled steel
usage : U = universal
casing model
S5035 I C - M 0150
emergency lighting module (power pack)
order code
model lamp type emergency duration battery rating weight (kg)
ELM PLCE PLCE 18W & below 1 - 3 hours 6V 4.5AH sealed lead acid 1.4ELM 718 (PLC) PLC 18W & below 2 - 3 hours 6V 4.5AH sealed lead acid 1.4ELM 726 NC (PLC) PLC 26W & below 1 - 3 hours 6V 4.0AH nickel cadmium 1.5(nickel - cadmium)
note:specificationsaresubjecttochangewithoutpriornotice
page 85
dimension
model dimension (mm) a b c d eELM PLCE 74 221 52 187 10ELM 718 (PLC) 74 221 52 187 10ELM726NC (PLC) 74 285 39 248 10(nickel-cadmium)
wiring diagram
technical data
voltage•220-240Vac50Hzbatterylife•500cyclesonstandbychargingtime:24hoursafterinstallationoremergencyused
features installation•installinminutes.nospecialhardwareortoolsisrequired
battery unit•overchargeprotectionprovidedbycircuitchargerforextendedbatterylife
•longlifesealedleadacidbattery/nickel-cadmiumbattery
housing•coldrolledsteelcompletewithepoxypowdercoatedpaint
manufacturing standard•MS619:Part:102:SECT102.221985(P)
b
d
e
ac
LN
PLCE Lamp
Model : ELM PLCERated Voltage : 220V - 240VACFrequency : 50Hz - 60HzEmer Duration : 2-3hrsCharging : 24hrsLamp : PLC 7W-18W (PHILIPS) From switch live
Switch
PLC Lamp
Switch
L
ELM PLCE ELM 718 PLC ELM 726NC (PLC)(nickel - cadmium)
N
UNSWITCHED SUPPLY
Model : ELM718Rated Voltage : 220V - 240VACFrequency : 50Hz - 60HzEmer Duration : 2-3hrsCharging : 24hrsLamp : PLC 7W-18W From switch live
UNSWITCHED SUPPLY
LN
Ballast
Model : ELM726NCRated Voltage : 220V ~ 240VacFrequency : 50Hz ~ 60HzEmer Duration : 1 ~ 3hrsCharging : 24hrsLamp : PLC 7W ~ 26W
From switch live
UNSWITCHED SUPPLY
PLC Lamp
Switch
commercial lighting
With Lighting Tools into the Future
Thoughts are created in heads, are formulated into ideas and grow to become solutions. The more heads used and the more knowledge, experience, creativity and passion brought into these processes, the better the result. Together we have a rich source of experience gained from countless successfully.
Whether your project is at the initial planning stage or in the final stages of completion, we can offer professional light planning and technical backup service using the latest lighting design software, DIALux, to verify the lighting level as it is fundamental to obtain correct illumination for different task areas.
From projects as large as lighting the streets of a city, factory or warehouse down to interior spaces, DIALux can produce accurate results in the horizontal, vertical or any object surfaces, taking into account reflections, shading, from partitions or objects.
Our design team is able to work out a complete design and simulation of a light system from consulting, idea drafting, visualization, up to final presentation of a lighting project.
ME series [ Light cast recessed luminaires-HID ]ME S15118ME S15121ME S15124ME S15127
ME S15118 - adjustable projector
Colour Model Lamp holder Weight (kg)
White ME S15118 G12 1.05
ME S15121- adjustable projector
Colour Model Lamp holder Weight (kg)
White ME S15121 E27 1.05
page 91
Dimension
ME S15118 ME S15121
ME S15124 & ME S15127
Description
Housing Material : Die-cast aluminiumTrim Material : Die-cast aluminiumReflector : High purity anodized
aluminiumLamp Type : CDM-T / CDM- R PAR 30Wattage : 35W & 70WFinishing : Epoxy powder coatingLamp Holder : G12 & E27 Lamp holder
conforming to EN/VDE standard
CDM-7-70W/842 G12
ME S15124 / ME 15127- fixed projector
Colour Model fix projector (degree) Lamp holder Weight (kg)
White ME S15124 / ME S15127 10 / 45 G12 1.05
SO series [ Light cast recessed luminaires-HID ]
Dimension
SO S10109 SO S10112
Description
Housing Material : Cold roll steelTrim Material : Die-cast aluminiumReflector : High purity anodized
aluminium Lamp Type : CDM-T / CDM-R PAR 30Wattage : 35W, 70W, & 150WFinishing : Epoxy powder coatingLamp Holder : G12 & E27 Lamp holder
conforming to EN/VDE standard
SO S10109
Colour Model Lamp holder Weight (kg)
White SO S10109 G12 0.63
SO S10112
Colour Model Lamp holder Weight (kg)
White SO S10112 E27 0.53
page 93
FA series [ Light cast recessed luminaires-HID ]
FA S15112
Colour Model Lamp holder Weight (kg)
White FA S15112 G12 0.70
FA S15115
Colour Model Lamp holder Weight (kg)
White FA S15115 E27 0.70
Dimension
FA S15112 FA S15115
143 143
155 155
143 143
155 155
Description
Housing Material : Die-cast aluminiumTrim Material : Die-cast aluminiumReflector : High purity anodized
aluminiumLamp Type : CDM-T / CDM- R PAR 30Wattage : 35W & 70WFinishing : Epoxy powder coatingLamp Holder : G12 & E27 Lamp holder
conforming to EN/VDE standard
PA S10115 (18W max 2 x G24d-2)
PA S10175 (18W max 2 x G24d-2)
PA S10133 (26W max 2 x G24d-3)
PA S10178 (26W max 2 x G24d-3)
TE S10151 (18W max 2 x G24d-2)
TE S10163 (26W max 2 x G24d-3)
PA series [ Light cast recessed luminaires-CFL ]
page 95
108
189
Dimension
PA S10115 & PA S10175
PA S10115 (max 2 x 18W)
Colour Model Lamp holder Weight (kg)
White PA S10115 G24d-2 / G24q-2 0.8
C/W beehive reflector match with PA S10118, PA S10121 & PA S10124
PA S10175 (max 2 x 18W)
Colour Model Lamp holder Weight (kg)
White PA S10175 G24d-2 / G24q-2 0.71
C/W clear anodized reflector match with PA S10127 & PA S10130
accesories– PA S10118 trim type
Colour Model Lamp holder Weight (kg)
White PA S10118 6 ” open trim 0.12
Example :
PA S10115 + PA S10124
housing code
housing model
trim type code
Order code
For open trim, semi frosted glass trim andfrosted glass trim (PA S10115) is the housing code. You need to complete the ordering code with the type of trims.
For turbo trim and cross trim (PA S10175) is the housing code. You need to complete the ordering code with the type of trims.
108
189
page 97
Lamp Type : 2 x PLC lampsWattage : Max 18WFinishing : Epoxy powder coatingLamp Holder : G24d-2 / 2 pin for magnetic ballast G24q-2 / 4 pin for electronic ballast
Description
Housing Material : Cold roll steelTrim Material : Die-cast aluminiumReflector : High purity anodized
aluminium
accesories– PA S10121 trim type
Colour Model Description Weight (kg)
White PA S10121 6 ” trim with frosted glass 0.27
accesories– PA S10124 trim type
Colour Model Description Weight (kg)
White PA S10124 6 ” trim with semi-frosted glass 0.27
accesories– PA S10127 trim type
Colour Model Description Weight (kg)
White PA S10127 6 ” trim with turbo 0.28
accesories– PA S10130 trim type
Colour Model Description Weight (kg)
White PA S10130 6 ” trim with cross 0.25
45º 45º
30º 15º 0º 15º 30º
90º 90º
105º 105º
75º 75º
200
250
300
15060º 60º 100
cd/klm C0-C180 C90-C270
2 x FDX13/840-2P PLC LAMP
45º 45º
30º 15º 0º 15º 30º
90º 90º
105º 105º
75º 75º
200
250
300
15060º 60º 100
cd/klm C0-C180 C90-C270
2 x FDX13/840-2P PLC LAMP
45º 45º
30º 15º 0º 15º 30º
90º 90º
105º 105º
75º 75º
200
250
300
15060º 60º 100
cd/klm C0-C180 C90-C270
2 x FDX13/840-2P PLC LAMP
45º 45º
30º 15º 0º 15º 30º
90º 90º
105º 105º
75º 75º
200
250
300
15060º 60º 100
cd/klm C0-C180 C90-C270
2 x FDX13/840-2P PLC LAMP
133
Dimension
PA S10133 & PA S10178
PA S10133 (max 2 x 26W)
Colour Model Lamp holder Weight (kg)
White PA S10133 G24d-3 / G24q-3 0.92
C/W beehive reflector match with PA S10136, PA S10139 & PA S10142
PA S10178 (max 2 x 26W)Colour Model Lamp holder Weight (kg)
White PA S10178 G24d-3 / G24q-3 0.76
C/W clear anodized reflector match with PA S10145 & PA S10148
accesories– PA S10136 trim type
Colour Model Lamp holder Weight (kg)
White PA S10136 8 ” open trim 0.14
Example :
PA S10133 + PA S10136
housing codehousing model
trim type code
PA series [ Light cast recessed luminaires-CFL ]
Order code
For open trim, semi frosted glass trim andfrosted glass trim (PA S10133) is the housing code. You need to complete the ordering code with the type of trims.
For turbo trim and cross trim (PA S10178) is the housing code. You need to complete the ordering code with the type of trims.
133
page 99
accesories– PA S10139 trim type
Colour Model Description Weight (kg) White PA S10139 8 ” trim with frosted glass 0.36
accesories– PA S10142 trim type
Colour Model Description Weight (kg)
White PA S10142 8 ” trim with semi-frosted glass 0.36
accesories– PA S10145 trim type
Colour Model Description Weight (kg)
White PA S10145 8 ” trim with turbo 0.33
accesories– PA S10148 trim type
Colour Model Description Weight (kg)
White PA S10148 8 ” trim with cross 0.29
Lamp Type : 2 x PLC lampsWattage : Max 26WFinishing : Epoxy powder coatingLamp Holder : G24d-3 / 2 pin for magnetic ballast G24q-3 / 4 pin for elctronic ballast
Description
Housing Material : Cold roll steelTrim Material : Die-cast aluminiumReflector : High purity anodized
aluminium
Dimension
TE S10151
TE S10151 (max 2x 18W)
Colour Model Lamp holder Weight (kg)
White TE S10151 * G24d-2 / G24q -2 0.73
* G 24d - 2 for magnet ballast G 24q - 2 for electronics ballast
accesories– TE S10154 reflector
Model Description Weight (kg)
TE S10154 Clear anodized aluminium reflector 0.08
accesories– TE S10157 reflector
Model Description Weight (kg)
TE S10157 Matt finished aluminium reflector 0.08
accesories– TE S10160 reflector
Model Description Weight (kg)
TE S10160 Beehive aluminium reflector 0.08
Order code
TE S10151 is the housing code. Youneed to complete the ordering code withthe type of reflectors. Example :TE S10151 + TE S10157
housing codehousing model reflector code
TE series [ Light cast recessed luminaires-CFL ]
Description
Housing Material : Cold roll steelTrim Material : Cold roll steelReflector : High purity anodized
aluminium Lamp Type : 2 x PLC lampsWattage : Max 18WFinishing : Epoxy powder coatingLamp Holder : G24d-2 / 2 pin G24q-2 / 4 pin
190
190
page 101
TE S10163 (max 2 x 26W)
Colour Model Lamp holder Weight (kg)
White TE S10163 * G24d-3 / G24q - 3 0.85
* G 24d - 3 for magnet ballast G 24q - 3 for electronics ballast
accesories– TE S10166 reflector
Model Description Weight (kg)
TE S10166 Clear anodized aluminium reflector 0.13
accesories– TE S10169 reflector
Model Description Weight (kg)
TE S10169 Matt finished aluminium reflector 0.13
accesories– TE S10172 reflector
Model Description Weight (kg)
TE S10172 Beehive aluminium reflector 0.13
Order code
TE S10163 is the housing code. Youneed to complete the ordering code withthe type of reflectors. Example :TE S10163 + TE S10169
housing codehousing model reflector code
TE series [ Light cast recessed luminaires-CFL ]
Dimension
TE S10163
Description
Housing Material : Cold roll steelTrim Material : Cold roll steelReflector : High purity anodized
aluminium Lamp Type : 2 x PLC lampsWattage : Max 26WFinishing : Epoxy powder coatingLamp Holder : G24d-3 / 2 pin G24q-3 / 4 pin
ET S10181 Beehive reflector
ET S10184 Matt anodised reflector
ET S10187 Sand blasted + clear anodised reflector
ET S10190 Beehive reflector + semi frosted glass
ET series [ Light cast recessed luminaires-CFL ]
page 103
ET S10181 Beehive reflector
ET S10184 Matt anodised reflector
ET S10187 Sand blasted + clear anodised reflector
ET S10190 Beehive reflector + semi frosted glass
ET S10181 - Beehive reflector
Colour Model Lamp holder Weight (kg)
White ET S10181 G24d-3 0.80
ET S10184 - Matt anodised reflector
Colour Model Lamp holder Weight (kg)
White ET S10184 G24d-3 0.80
ET S10187 - Sand blasted + clear anodised reflector
Colour Model Lamp holder Weight (kg)
White ET S10187 G24d-3 0.80
ET S10190 - Beehive reflector + semi-frosted glass
Colour Model Lamp holder Weight (kg)
White ET S10190 G24d-3 0.80
Dimension
ET S10181, ET S10184,ET S10187 & ET S10190
228
190
228
190
228
190
Description
Housing Material : Cold roll steelTrim Material : Cold roll steel & die-cast aluminiumReflector : High purity anodized
aluminiumLamp Type : 1x PLC lampWattage : Max 26WFinishing : Epoxy powder coatingLamp Holder : G24d-3 / 2 pin
MA spot head series [ modular recessed luminaires ]
Order code
MA S17106 is the housing code. You needto complete the ordering code with thehousing and spot heads. Example :
MA S17109 + MA S17118 + S17121
housing code another spot
housing model head code spot head code
MA series housing model description
Housing Material : Cold roll steelTrim Material : Cold roll steelReflector : High purity anodized
aluminium Lamp Type : AR111, CDM-T & CDM-R PAR 30Wattage : Max 35W – 150WFinishing : Epoxy powder coatingLamp Holder : G53 & G12 & E27 Lamp
holder conforming to EN/VDE standard
page 105
Dimension
MA S17106 MA S17109 MA S17112
MA S17106
Colour Model Weight (kg)
White MA S17106 1.15
MA S17109
Colour Model Weight (kg)
White MA S17109 1.9
MA S17112
Colour Model Weight (kg)
White MA S17112 2.6
Dimension
MA S17118 CDM-T (35W / 70W / MA S17121 PAR30 / CDM-R (35W / 70W150W 1 x G12) max 1 x E27)
MA S17118 CDM-T (35W / 70W / 150W max 1 x G12)
Colour Model Lamp holder Weight (kg)
White MA S17118 G12 0.36
MA S17121 PAR30 / CDM-R (35W / 70W max 1 x E27)
Colour Model Lamp holder Weight (kg)
White MA S17121 E27 0.24
MA spot head series description
MA Spot Head Series – S17118 Trim Material : Die – Cast AluminiumReflector : High purity anodized
aluminiumLamp Type : CDM-TWattage : Max 35W – 150WFinishing : Epoxy powder coatingLamp Holder : G12 Lamp holder conforming to EN/VDE
standard
MA Spot Head Series – S17121Trim Material : Die – Cast AluminiumLamp Type : CDM-R PAR30Wattage : Max 35W – 70WFinishing : Epoxy powder coatingLamp Holder : E27a Lamp holder conforming to EN/VDE
standard
page 107
KR series [ ceiling mounted luminaires ]
Dimension
KR S12118
KR S12118
Colour Model Lamp holder Weight (kg)
White KR S12118 G12 2.0
Description
Housing Material : High heat resistance polypropyleneReflector : High purity anodized
aluminiumGear : Electronic ballast Lamp Type : CDM-T Wattage : 35W & 70WFinishing : Epoxy powder coatingLamp Holder : G12 Lamp holder conforming to EN/VDE
standard
35W
35W
page 109
TA S12100 (PLCE 26W max 1 x E27)
TA series [ ceiling mounted luminaires ]
Dimension
TA S12100
Description
TA Series Housing Material : Cold roll steelReflector : High purity anodized
aluminiumLamp Type : PLCE lampWattage : Max 26WFinishing : Epoxy powder coatingLamp Holder : E27 Lamp holder conforming to EN/VDE
standard
TA S12100 (PLCE 26W max 1 x E27)
Colour Model Lamp holder Weight (kg)
White TA S12100 E27 1.4
298
195
298
195
page 111
298
195
Dimension
IS S12103 (PLCE 20W max 1 x E27)
Description
IS Series Housing Material : Cold roll steelReflector : High purity anodized
aluminiumLamp Type : PLCE lampWattage : Max 20WFinishing : Epoxy powder coatingLamp Holder : E27 Lamp holder conforming to EN/VDE
standard
IS S12103 (PLCE 20W max 1 x E27) beehive and frosted facet projector
Colour Model Lamp holder Weight (kg)
White IS S12103 E27 0.95
IS series [ ceiling mounted luminaires ]
Dimension
IR S12106 (PLCE 26W max 1 x E27) IR S12109 (PLC 18W max 2 x G24d-2)
IR S12106 (PLCE 26W max 1 x E27)
Colour Model Lamp holder Weight (kg)
White IR S12106 E27 0.9
IR S12109 (PLC 18W max 2 x G24d-2)
Colour Model Lamp holder Weight (kg)
White IR S12109 G24d-2 1.15
* Black and silver available upon request
IR series [ ceiling mounted luminaires ]
Description
IR Series – S12106Housing Material : Cold roll steelReflector : High purity anodized
aluminiumLamp Type : PLCE lampWattage : Max 26WFinishing : Epoxy powder coatingLamp Holder : E27 Lamp holder conforming to EN/VDE
standard
IR Series – S12109Housing Material : Cold roll steelReflector : High purity anodized
aluminiumLamp Type : 2 x PLC lampsWattage : Max 18WFinishing : Epoxy powder coatingLamp Holder : G24d-2 / 2 pin
page 113
XE S12112
XE S12115
XE S13106
XE S13109
XE series [ track light and accessories ]
XE S12112 (surface mounted)
Colour Model Lamp holder Weight (kg)
White XE S12112 E27 1.25
XE S13106 (3-phase track mounted)
Colour Model Lamp holder Weight (kg)
White XE S13106 E27 1.25
Dimension
XE S12112 XE S13106
193
115 115187217
207
193
115 115187217
207
193
115 115187217
207
193
115 115187217
207
Description
XE Series – S12112 & S13106Housing Material : Die – Cast AluminiumReflector : High purity anodized
aluminiumMounting Method : Surface & 3 phase trackLamp Type : CDM-R PAR30Wattage : 35W & 70WFinishing : Epoxy powder coatingLamp Holder : E27 Lamp holder conforming to EN/VDE
standard
page 115
Dimension
XE S12115 XE S13109
193
115 115187217
207
193
115 115187217
207
Description
XE Series – S12115 & S13109Housing Material : Die – Cast AluminiumReflector : High purity anodized
aluminiumMounting Method : Surface & 3 phase trackLamp Type : CDM-TWattage : 35W & 70WFinishing : Epoxy powder coatingLamp Holder : G12 Lamp holder conforming to EN/VDE
standard
XE S12115 (surface mounted)
Colour Model Lamp holde Weight (kg)
White XE S12115 G12 1.25
XE S13109 (3-phase track mounted)
Colour Model Lamp holder Weight (kg)
White XE S13109 G12 1.25
LE S13100 20 degree reflector
LE S13103 45 degree reflector
LE series [ track light and accessories ]
page 117
Dimension
LE S13100 20 degree reflector & LE S13103 45 degree reflector
Description
LE Series – S13100Housing Material : Die – Cast AluminiumReflector : 20° & 45° High purity
anodized aluminiumMounting method : 3 phase trackLamp Type : CDM-TWattage : Max 70WFinishing : RAL 9016 Epoxy powder coatingLamp Holder : G12 Lamp holder conforming to EN/VDE
standard
LE S13100 20 degree reflector (3-phase track mounted)
Colour Model Lamp holder Weight (kg)
White LE S13100 G12 1.10
LE S13103 45 degree reflector (3-phase track mounted)
Colour Model Lamp holder Weight (kg)
White LE S13103 G12 1.10
* Black and silver available upon request
accessories – MO S18100
Colour Description
White 3 circuit trunking rail 1000 mm without power connector and end cap
accessories – MO S18103
Colour Description
White 3 circuit trunking rail 2000 mm without power connector and end cap
accessories – MO S18106
Colour Description
White 3 circuit trunking rail 3000 mm without power connector and end cap
MO series [ track light and accessories ]
Description
MO three-circuit system lets you select the style of lighting that’s right for the being lit.
Thanks to the system’s three built-in independently controlled circuits, a twist of the dial lets you switch circuits, makes it easy to control lightings to match changes in time of day, furnishing and decorations, and other characteristics of the area being lit. This multiple-circuit system makes a convenient addition to spaces ranging from department stores to art museums. Its refined design ensures that even long duct runs will have a beautiful, finished appearance.
page 119
accessories – MO S19100
Colour Description
White 3 circuit trunking rail power connector
accesories– MO S20100
Colour Description
White 3 circuit trunking rail end capTec
accessories – MO S19103
Colour Description
White 3 circuit trunking rail series T type connector (right)
accessories – MO S19106
Colour Description
White 3 circuit trunking rail series T type connector (left)
accessories – MO S19109
Colour Description
White 3 circuit trunking rail series L type connector (right)
accessories – MO S19112
Colour Description
White 3 circuit trunking rail series L type connector (left)
CO S14100
CO S14103
CO series [ pendant luminaires ]
page 121
CO S14100
Model Description Weight (kg)
CO S14100 16” PC refractor & AL pendant head 1.50
* PC diffuser is available
CO S14103
Model Description Weight (kg)
CO S14103 14” AL reflector & AL pendant head 1.70
Dimension
CO S14100 CO S14103
Description
CO Series – S14100Head Material : Extruded aluminiumReflector : Polycarbonate Diffuser : Polycarbonate Lamp Type : HID & PLCE lampWattage : Max 150WFinishing : Epoxy powder coatingLamp Holder : E27
CO Series – S14103Head Material : Extruded aluminiumReflector : 2mm Thick 99.9% super
purity aluminium Glass Visor : Sand blasted tempered
glassClip : Technopolymer latchLamp Type : HID & PLCE lampWattage : Max 150WFinishing : Epoxy powder coatingLamp Holder : E27
outdoor commercial lighting
page 123
galileo
page 125
dimension photometric
galileo L130701
90
note : photometric result tested based on 6000lm HPS70w tube
0
±180
-90
317.80
494.24
370.68
247.12
123.56
Ø738
note: standard 3m pole comes with the luminaire. Other pole height is available upon request.
3400
3000
features •���elegance�lighting�system�designed�for�discharge�lamps.The�system�is�designed�for�efficiently�illuminating�the�desired�areas.
•���corrosion�resistant�die-cast��aluminium�optical�housing�with weather�resistant�epoxy�powder��coating�and�stainless�steel�screws�to�provide�the�superior�quality�finish�for�all�weather�conditions.
•��closed�by�opal�UV�stabilized�PMMA�diffuser,�provide�soft�light�with�a�large�illumination�area�suitable�for�external�applications.
•��poles�are�available�in�galvanised�steel�with�primary�powder�coating�for�high�corrosion�resistance�on�request.
technical specification input voltage220�-�240Vac
lamp typeHID�lamp
wattage35w�-�70w
lamp holderE27
spigot sizeø76mm
insulation classclass�1
ingress protectionIP54
maximum weight6.0�kg�(without�pole�and�gear)
order code
model lamp type lamp holder order code
GALILEO�L130701�MH35w�w/o�pole�� tubular�/�bulb� E27� GALILEO�L130701-M0035GALILEO�L130701�MH70w�w/o�pole�� tubular�/�bulb� E27� GALILEO�L130701-M0070GALILEO�L130701�MH35w�c/w�pole�� tubular�/�bulb� E27� GALILEO�L130701-M0035-PGALILEO�L130701�MH70w�c/w�pole�� tubular�/�bulb� E27� GALILEO�L130701-M0070-PGALILEO�L130701�HPS70w�w/o�pole� tubular�/�bulb� E27� GALILEO�L130701-S0070 GALILEO�L130701�HPS70w�c/w�pole� tubular�/�bulb� E27� GALILEO�L130701-S0070-P
note : specifications are subject to change without prior notice *M: Metal halide S: Sodium P: Pole
application •�residential�&�commercial�areas•�parks•�city�centers•�car�parks•�public�&�private�areas•�pedestrian�precincts
base dimension
page 127
galileo L130702
Ø738
3400
3000
note: standard 3m pole comes with the luminaire. Other pole height is available upon request.
dimension
application •�residential�&�commercial�areas•�parks•�city�centers•�car�parks•�garden•�pedestrian�precincts
features •��elegance�lighting�system�designed�for�discharge�lamps.�The�system�is�designed�for�efficiently�illuminating�the�desired�areas.
•��corrosion�resistant�die-cast aluminium�optical�housing�with��weather�resistant�epoxy�powder��coating�and�stainless�steel�screws�to�provide�the�superior�quality�finish�for�all�weather�conditions.
•��the�optical�system�used�in��conjunction�with�the�UV-stabilized�transparent�PMMA�diffuser�version�consists�of�an�aluminium�louver�system�providing�glare�control.�
•��poles�are�available�in�galvanised��steel�with�primary�powder�coating�for�high�corrosion�resistance�on�request.
technical specification input voltage220�-�240Vac
lamp typeHID�lamp
wattage35w�-�70w
lamp holderE27
spigot sizeø76mm
insulation classclass�1
ingress protectionIP54
maximum weight6.0�kg�(without�pole�and�gear)
90
note : photometric result tested based on 6000lm HPS70w tube
0
±180
-90
606.57
485.26
363.94
242.63
121.31
photometric
order code
model lamp type lamp holder order code
GALILEO�L130702�MH35w�w/o�pole�� tubular�/�bulb� E27� GALILEO�L130702-M0035GALILEO�L130702�MH70w�w/o�pole�� tubular�/�bulb� E27� GALILEO�L130702-M0070GALILEO�L130702�MH35w�c/w�pole�� tubular�/�bulb� E27� GALILEO�L130702-M0035-PGALILEO�L130702�MH70w�c/w�pole�� tubular�/�bulb� E27� GALILEO�L130702-M0070-PGALILEO�L130702�HPS70w�w/o�pole� tubular�/�bulb� E27� GALILEO�L130702-S0070 GALILEO�L130702�HPS70w�c/w�pole� tubular�/�bulb� E27� GALILEO�L130702-S0070-P
note : specifications are subject to change without prior notice *M: Metal halide S: Sodium P: Pole
base dimension
galileo L130703
90
note : photometric result tested based on 6000lm HPS70w tube
0
±180
-90
599.19
479.35
359.51
239.68
119.84
Ø730
Ø140
3500
3000
note: standard 3m pole comes with the luminaire. Other pole height is available upon request.
dimension
technical specification input voltage220�-�240Vac
lamp typeHID�lamp
wattage35w�-�70w
lamp holderE27
spigot sizeø76mm
insulation classclass�1
ingress protectionIP54
maximum weight6.0�kg�(without�pole�and�gear)
application •�residential�&�commercial�areas•�parks•�city�centers•�car�parks•�hotel•�pedestrian�precincts
features •��elegance�lighting�system�designed�for�discharge�lamps.�The�system�is�designed�for�efficiently�illuminating�the�desired�areas.
•���corrosion�resistant�die-cast��aluminium�optical�Canopy�surface�and�mast�mounting�element�coated�in�high-grade,�weather�resistant�epoxy�powder�provide�the�superior�quality�finish�for�all�weather�conditions.
•��t�he�optical�system�used�� �in�conjunction�with�the�transparent�PMMA�diffuser�version�consists�of�an�aluminium�louver�system�providing�glare�control.�
•��poles�are�available�in�galvanised� �steel�with�primary�powder�coating��for�high�corrosion�resistance�on�request.
photometric
order code
model lamp type lamp holder order code
GALILEO�L130703�MH35w�w/o�pole�� tubular�/�bulb� E27� GALILEO�L130703-M0035GALILEO�L130703�MH70w�w/o�pole�� tubular�/�bulb� E27� GALILEO�L130703-M0070GALILEO�L130703�MH35w�c/w�pole�� tubular�/�bulb� E27� GALILEO�L130703-M0035-PGALILEO�L130703�MH70w�c/w�pole�� tubular�/�bulb� E27� GALILEO�L130703-M0070-PGALILEO�L130703�HPS70w�w/o�pole� tubular�/�bulb� E27� GALILEO�L130703-S0070 GALILEO�L130703�HPS70w�c/w�pole� tubular�/�bulb� E27� GALILEO�L130703-S0070-P
note : specifications are subject to change without prior notice *M: Metal halide S: Sodium P: Pole
base dimension
page 129
galileo L130704
90
note : photometric result tested based on 6000lm HPS70w tube
0
±180
-90
1161.82
929.46
697.09
464.73
232.36
Ø738
3500
3000
note: standard 3m pole comes with the luminaire. Other pole height is available upon request.
dimension
application •�residential�&�commercial�areas•�parks•�city�centers•�car�parks•�garden•�pedestrian�precincts
photometric
features •��elegance�lighting�system�designed�for�discharge�lamps.�The�system�is�designed�for�efficiently�illuminating�the�desired�areas.
•��corrosion�resistant�die-cast�� ��aluminium�optical�housing�with �weather�resistant�epoxy�powder���coating�and�stainless�steel�screws�to�provide�the�superior�quality�finish�for�all�weather�conditions.
•��poles�are�available�in�galvanised���steel�with�primary�powder�coating�for�high�corrosion�resistance�on�request.
technical specification input voltage220�-�240Vac
lamp typeHID�lamp
wattage70w�-�150w (250w�is�available�upon�request)
lamp holderE27�/�E40
spigot sizeø76mm
insulation classclass�1
ingress protectionIP54
maximum weight10.5�kg�(complete�with�gear�but�without�pole)
order code
model lamp type lamp holder order code
GALILEO�L130704�MH70w�w/o�pole�� tubular�/�bulb� E27� GALILEO�L130704-M0070GALILEO�L130704�MH150w�w/o�pole� tubular�/�bulb� E27�� GALILEO�L130704-M0150GALILEO�L130704�MH70w�c/w�pole�� tubular�/�bulb� E27� GALILEO�L130704-M0070-PGALILEO�L130704�MH150w�c/w�pole� tubular�/�bulb� E27� GALILEO�L130704-M0150-PGALILEO�L130704�HPS70w�w/o�pole� tubular�/�bulb� E27� GALILEO�L130704-S0070 GALILEO�L130704�HPS150w�w/o�pole� tubular�/�bulb� E27�/�E40� GALILEO�L130704-S0150 GALILEO�L130704�HPS70w�c/w�pole� tubular�/�bulb� E27� GALILEO�L130704-S0070-P GALILEO�L130704�HPS150w�c/w�pole� tubular�/�bulb� E27�/�E40� GALILEO�L130704-S0150-P
note�:�specifications�are�subject�to�change�without�prior�notice���*M:�Metal�halide���S:�Sodium���P:�Pole
base dimension
galileo L130705
3800
note: standard 3m pole comes with the luminaire. Others pole height is available upon request.
870
dimension
technical specification input voltage220�-�240Vac
lamp typeHID�lamp
wattage35w�-�150w
lamp holderG12
spigot sizeø114mm
insulation classclass�1
ingress protectionIP65
maximum weight10.5�kg�(without�pole�and�gear)
application •�residential�&�commercial�areas•�parks•�city�centers•�car�parks•�hotel•�pedestrian�precincts
features •��corrosion�resistant�die-cast�aluminium�optical�housing�with weather-resistant�epoxy�powder�coating�and�stainless�steel�screws�to�provide�the�superior�quality�finish�for�all�weather�conditions.
•��closed�by�a�toughened�glass�
and�durable�silicone�rubber�gaskets.�
•��high�polymer�composite�
canopy�for�secondary�reflector�technology�suitable�for�outdoor�use.�
•��special�mirror�coating�on�
the�secondary�reflector�to withstand�extremely�bad�weather,�provide�soft�light�with�a�large�illumination�area.
photometric
90
note : photometric result tested based on 6700lm MH70w tube
0
±180
-90
6671.98
5337.58
4003.19
2668.79
1334.40
order code
model lamp type lamp holder order code
GALILEO�L130705�MH35w�w/o�pole� tubular�� � G12� GALILEO�L130705-M0035GALILEO�L130705�MH70w�w/o�pole� tubular� � G12� GALILEO�L130705-M0070GALILEO�L130705�MH150w�w/o�pole� tubular� � G12� GALILEO�L130705-M0150GALILEO�L130705�MH35w�c/w�pole� tubular� � G12� GALILEO�L130705-M0035-PGALILEO�L130705�MH70w�c/w�pole� tubular� � G12� GALILEO�L130705-M0070-P GALILEO�L130705�MH150w�c/w�pole� tubular� � G12� GALILEO�L130705-M0150-P
note : specifications are subject to change without prior notice *M: Metal halide P: Pole
base dimension
page 131
galileo L130706
90
note : photometric result tested based on 12700lm MH150w tube
0
±180
-90
4689.63
3751.70
2813.78
1875.85
937.93
Ø800
Ø140
3400
note: standard 3m pole comes with the luminaire. Other pole height is available upon request.
dimension
application •�residential�&�commercial�areas•�parks•�city�centers•�car�parks•�garden•�pedestrian�precincts
technical specification input voltage220�-�240Vac
lamp typeHID�lamp
wattage35w�-�150w
lamp holderG12
spigot sizeø76mm
insulation classclass�1
ingress protectionIP65
maximum weight12.5�kg�(complete�with�gear�but�without�pole)
features •�corrosion�resistant�die-cast��� aluminium�optical�housing�with � �weather-resistant�epoxy�powder��coating�and�stainless�steel�screws��to�provide�the�superior�quality�finish�for�all�weather�conditions.
•�closed�by�a�toughened�glass�and��� durable�silicone�rubber�gaskets.�
•��metal�canopy�for�secondary�reflector�technology�� �suitable�for�outdoor�use.�
•��special�mirror�coating�on�the�
secondary�reflector�withstand�extremely�bad�weather,�provide�soft�light�with�a�large�illumination�area.
photometric
order code
model lamp type lamp holder order code
GALILEO�L130706�MH35w�w/o�pole� tubular� � G12� GALILEO�L130706-M0035GALILEO�L130706�MH70w�w/o�pole� tubular� � G12� GALILEO�L130706-M0070GALILEO�L130706�MH150w�w/o�pole� tubular� � G12� GALILEO�L130705-M0150GALILEO�L130706�MH35w�c/w�pole� tubular� � G12� GALILEO�L130705-M0035-PGALILEO�L130706�MH70w�c/w�pole� tubular� � G12� GALILEO�L130706-M0070-P GALILEO�L130706�MH150w�c/w�pole� tubular� � G12� GALILEO�L130706-M0150-P
note : specifications are subject to change without prior notice *M: Metal halide P: Pole
base dimension
brentano
page 133
brentano B140802
90
note : photometric result tested based on PLCE 20w lamp
0
±180
-90
47.63
38.10
28.58
19.05
9.53
200
230
600
130
4-Ø12
application •�gardens•�residential�areas•�walkways•�hotel�premises•�parks•�cycle�tracks
photometric
technical specification input voltage220�-�240Vac
lamp typeenergy�saving�lamp
wattagePLCE�18-26w
lamp holderE27
insulation classclass�1
ingress protectionIP55
maximum weight6.8�kg
dimension
features •��elegance�lighting�system�designed�for�energy�saving�lamps.The�system��is�designed�for�efficiently�illuminating�the�desired�areas.
•��high�quality�cold�roll�steel�optical���housing�with�weather�resistant���epoxy�powder�coating�and�stainless�steel�screws�to�provide�the�superior�quality�finish�for�all�weather�conditions.
order code
model lamp type lamp holder order code
BRENTANO�B140802� energy�saving� E27� � BRENTANO�B140802 � lamp�PLCE � 18-26w note�:�specifications�are�subject�to�change�without�prior�notice
220
900
3-Ø12
260
brentano B140803 application •�gardens•�residential�areas•�pathways•�hotel�premises•�parks•�cycle�tracks
photometric
technical specification input voltage220�-�240Vac
lamp typeenergy�saving�lamp
wattagePLCE�18-26w
lamp holderE27
insulation classclass�1
ingress protectionIP55
maximum weight5.6�kg
dimension
features •��elegance�lighting�system�designed�for�energy�saving�lamps.The�system�is�designed�for�efficiently�illuminating�the�desired�areas.
•��corrosion�resistant�die-cast�� ��aluminium�optical�housing�with �weather�resistant�epoxy�powder���coating�and�stainless�steel�screws�to�provide�the�superior�quality�finish�for�all�weather�conditions.
•��closed�by�heat�resistant�polycarbonate�providing�rotationally�symmetrical�light�distribution�with�glare-free�lighting�design.
90
note : photometric result tested based on PLCE 24w lamp
0
±180
-90
64.47
51.58
38.68
25.79
12.89
order code
model lamp type lamp holder order code
BRENTANO�B140803� energy�saving�� E27� � BRENTANO�B140803 � � lamp�PLCE � � 18-26w
note�:�specifications�are�subject�to�change�without�prior�notice
page 135
550
160
4-Ø12
230
160
brentano B140804 application •�gardens•�residential�areas•�driveways•�hotel�premises•�parks•�cycle�tracks
photometric
technical specification input voltage220�-�240Vac
lamp typeenergy�saving�lamp
wattagePLCE�18-26w
lamp holderE27
insulation classclass�1
ingress protectionIP55
maximum weight7.2�kg
dimension
features •���elegance�lighting�system�designed�for�energy�saving�lamps.�These�architecturally�designed�bollards�are�providing�a�pleasant�light�distribution.
•��corrosion�resistant�die-cast�� ��aluminium�optical�housing�with �weather�resistant�epoxy�powder���coating�and�stainless�steel�screws�to�provide�the�superior�quality�finish�for�all�weather�conditions.
90
note : photometric result tested based on PLCE 24w lamp
0
±180
-90
49.72
39.78
29.83
19.89
9.94
order code
model lamp type lamp holder order code BRENTANO�B140804� energy�saving�� � E27� BRENTANO�B140804 � � lamp�PLCE � � 18-26w
note�:�specifications�are�subject�to�change�without�prior�notice
850
3-Ø12
Ø219
Ø140
brentano B140805
application • gardens• residential areas• walkways• hotel premises• parks• cycle tracks
photometric
technical specification input voltage220 - 240Vac
lamp typeHID lamp
wattage70W
lamp holderE27
insulation classclass 1
ingress protectionIP55
maximum weight13.8 kg (complete with gear)
dimension
features • elegance lighting system
designed for discharge lamps.The system is designed for efficiently illuminating the desired areas.
• corrosion resistant die-cast aluminium optical housing with weather resistant epoxy powder coating and stainless steel screws to provide the superior quality finish for all weather conditions.
• closed by milk-white UV-stabilized PMMA diffuser polycarbonate providing rotationally symmetrical light distribution with glare free lighting.
90
note : photometric result tested based on 6000lm MH70w bulb
0
±180
-90
271.05
216.84
162.63
108.42
54.21
order code
model lamp type lamp holder order code
BRENTANO B140805 MH 70w tubular / bulb E27 BRENTANO B140805-M0070 BRENTANO B140805 HPS 70w tubular / bulb E27 BRENTANO B140805-S0070
note : specifications are subject to change without prior notice *M: Metal halide S: Sodium
page 137
horeca, elano, cavalry, fagon
horeca W100101
90
note : photometric result tested based on 12500lm MH150w Rx7S
0
±180
-90
1996.78
1597.42
1198.07
798.71
399.36
365
177
180
dimension
features •��surface�washers�with�efficient�up�down�light�distribution�for�discharge�lamps�providing�direct�illumination�which�suitable�for�the�in-depth�illumination�of�surfaces�for�the�purposes�of �visual�continuity�and�highlighting �the�areas.
•��these�new�designed�wall�recessed�luminaires�are�technically�and�decoratively�developed�with�a�high�ingress�protection�IP65�particularly�� �in�corrosive�environmental �conditions.
•��body�component�are�constructed�from�corrosion�resistant�die-cast�aluminium�and�coating�with�weather-resistant�epoxy�powder.�Heat�resistant�toughened�tempered�� �glass�cover.
technical specification input voltage220�-�240Vac
lamp typedouble�ended�HID�lamp
wattage70w�-�150w
lamp holder1�x�Rx7S
insulation classclass�1
ingress protectionIP65
maximum weight5.5�kg�(complete�with�gear)
photometric
application •�historical�buildings•�churches•�theatres•�museums•�passageways•�corridors�areas•�exhibitions�halls
order code
model lamp type lamp holder order code
HORECA�W100101�MH70w� double�ended� Rx7S� � HORECA�W100101-M0070HORECA�W100101�MH150w� double�ended� Rx7S� � HORECA�W100101-M0150HORECA�W100101�HPS70w� double�ended� Rx7S� � HORECA�W100101-S0070 HORECA�W100101�HPS150w� double�ended� Rx7S� � HORECA�W100101-S0150
note�:�specifications�are�subject�to�change�without�prior�notice���*M:�Metal�halide���S:�Sodium
page 139
elano W100201, W100202 & W100203
90
note : photometric result tested based on 5500lm MH70w Rx7S
0
±180
-90
2370.48
1896.38
1422.29
948.19
474.10
115 210
177
dimension
features •����surface�washers�with�efficient �light�distribution�for�discharge�lamps�providing�direct�illumination�which�suitable�for�the�in-depth�illumination�of�surfaces�for�the�purposes�of�visual�continuity�and�highlighting�the�areas.
•��these�new�designed�wall�recessed�luminaires�are�technically�and�decoratively�developed�with�a�high�� �ingress�protection�IP65�particularly�in�corrosive�environmental�conditions.
•��body�component�are�constructed�from�corrosion�resistant�die-cast�aluminium�and�coating�with�weather��resistant�epoxy�powder.�Heat���resistant�toughened�tempered���glass�cover.
technical specification input voltage220�-�240Vac
lamp typedouble�ended�HID�lamp
wattage70w�-�150w
lamp holder1�x�Rx7S
insulation classclass�1
ingress protectionIP65
maximum weight6.3�kg�(complete�with�gear)
photometric
application •�historical�buildings•�churches•�theatres•�museums•�passageways•�corridors�areas•�exhibitions�halls
order code
model lamp type lamp no up beam wide up beam narrow up beam
ELANO�W100201�MH70w� double�ended� Rx7S� ELANO�W100201-M0070� ELANO�W100202-M0070� ELANO�W100203-M0070ELANO�W100201�MH150w� double�ended� Rx7S� ELANO�W100201-M0150� ELANO�W100202-M0150� ELANO�W100203-M0150ELANO�W100201�HPS70w� double�ended� Rx7S� ELANO�W100201-S0070� ELANO�W100202-S0070� ELANO�W100203-S0070ELANO�W100201�HPS150w� double�ended� Rx7S� ELANO�W100201-S0150� ELANO�W100202-S0150� ELANO�W100203-S0150
note�:�specifications�are�subject�to�change�without�prior�notice���*M:�Metal�halide���S:�Sodium
cavalry W100301
90
note : photometric result tested based on 2x 100w PAR30 Halogen E27
0
±180
-90
8630.27
6904.22
5178.16
3452.11
1726.05148
341 221
dimension
features •��ideally�designed�to�illuminate�the�wall�and�column�on�vertical�surfaces�with�beam�distribution�upward�and�downward�light�source.
•��high�corrosion�resistance�die-cast�and�extrusion�aluminium�housing�with�clear�heat�resistant�tempered�glass.
•��stainless�steel�screws�and�durable��silicone�rubber�gasket�to�enhance�the�ingress�protection�of�the�luminaire�against�all�weather�conditions.
•��anodised�high�purity�� �aluminium�reflector�design�for�two�directional’s�up�and�down�light�distribution�use�two�lamps.
technical specification input voltage220�-�240Vac
lamp type2�x�PAR�30�Halogen�lamp
wattagemax�100w
lamp holder2�x�E27
insulation classclass�1
ingress protectionIP65
maximum weight6.5�kg
photometric
application •�architectural�structures•�condominiums•�theatres•�museums•�corridors�areas•�exhibitions�halls
order code
model lamp type lamp holder order code
CAVALRY�W100301� Halogen�/�PAR30� E27� � CAVALRY�W100301
note�:�specifications�are�subject�to�change�without�prior�notice�
page 141
cavalry W100302
90
note : photometric result tested based on 2x 3500lm MH35w tube
0
±180
-90
2089.80
1671.84
1253.88
835.92
417.96
dimension
features •��ideal�is�designed�to�illuminate�the�wall�and�column�on�vertical�surfaces�with�beam�distribution�upward�and�downward�light�source.
•��high�corrosion�resistance�die-cast�and�extrusion�aluminium�housing�with�clear�heat�resistant�tempered�glass.
•��stainless�steel�screws�and�durable�silicone�rubber�gasket�to�enhance�the�ingress�protection�of�the�luminaire�� �against�all�weather�conditions.
•��two�pieces�anodised�high�purity���aluminium�reflector�design�for�two�directional’s�up�and�down�light�distribution�use�two�lamps.
technical specification input voltage220�-�240Vac
lamp type2�x�HID�lamp
wattage35w
lamp holder2�x�G12
insulation classclass�1
ingress protectionIP65
maximum weight7.5�kg�(complete�with�gear)
photometric
application •�architectural�structures•�condominiums•�theatres•�museums•�corridors�areas•�exhibitions�halls
order code
model lamp type lamp holder order code
CAVALRY�W100302�MH35w� tubular� � G12� CAVALRY�W100302-M0035
note�:�specifications�are�subject�to�change�without�prior�notice����*M:�Metal�halide
148
510 221
fagon W100501 (recessed�mounted)
90
note : photometric result tested based on 1800lm PLC26w
0
±180
-90
68.32
54.66
40.99
27.33
13.66
265
120
107
dimension
features •��this�wall�recessed�unit�provides�the�most�pleasing�and�even�light�distribution�which�facilitates�safe�pedestrian�traffic�amongst�walkways�and�stairways�by�creating�visual�continuity�and�highlighting�the�walkways.
•��the�energy�saving�bulb�have�� �significantly�reduced�the�power���consumption�of�the�luminaires�thus�reducing�the�heat�generated�and�the�associated�running�costs.
•��corrosion�resistant�die-cast�aluminium�body�and�frosted�glass�lens.
technical specification input voltage220�-�240Vac
lamp typePLC�lamp
wattagemax.�26W
lamp holderG24D-3
insulation classclass�1
ingress protectionIP44
maximum weight1.5�kg�(complete�with�gear)
photometric
application •�historical�buildings•�churches•�theatres•�museums•�passageways•�corridors�areas•�exhibitions�halls
order code
model lamp type lamp holder order code
FAGON�W100501�PLC18w� PLC18w� G24d-3� FAGON�W100501-PLC0018 FAGON�W100501�PLC26w� PLC26w� G24d-3� FAGON�W100501-PLC0026
note�:�specifications�are�subject�to�change�without�prior�notice
page 143
fagon W100502 (surface�mounted)
90
note : photometric result tested based on 1800lm PLC26w
0
±180
-90
68.32
54.66
40.99
27.33
13.66
dimension
features •��this�wall�surface�unit�provides�the���most�pleasing�and�even�light�� �distribution�which�facilitates�safe �pedestrian�traffic�amongst�walkways�and�stairways�by�creating�visual�continuity�and�highlighting�the�walkways.
•���the�energy�saving�bulb�have�� ��significantly�reduced�the�power�consumption�of�the�luminaires�thus�reducing�the�heat�generated�and�the�associated�running�costs.
•��corrosion�resistant�die-cast�aluminium�body�and�frosted�glass�lens.
technical specification input voltage220�-�240Vac
lamp typePLC�lamp
wattagemax.�26W
lamp holderG24D-3
insulation classclass�1
ingress protectionIP44
maximum weight1.7�kg�(complete�with�gear)
photometric
application •�historical�buildings•�churches•�theatres•�museums•�passageways•�corridors�areas•�exhibitions�halls
order code
model lamp type lamp holder order code
FAGON�W100502�PLC�18w� PLC18w� G24d-2� FAGON�W100502-PLC0018 FAGON�W100502�PLC�26w� PLC26w� G24d-3� FAGON�W100502-PLC0026
note�:�specifications�are�subject�to�change�without�prior�notice
265
120
99
fagon�W100503 (recessed�mounted)
90
note : photometric result tested based on 1800lm PLC26w
0
±180
-90
104.89
83.91
62.93
20.98
41.96
dimension
features •��this�wall�washer�unit�provides�the�most�pleasing�and�even�light�distribution�which�facilitates�safe�pedestrian�traffic�amongst�walkways��and�stairways�by�creating�visual�continuity�and�highlighting�the���walkways.
•��the�energy�saving�bulb�have�� �significantly�reduced�the�power�consumption�of�the�luminaires�thus�reducing�the�heat�generated�and�the�associated�running�costs.
•��corrosion�resistant�die-cast�aluminium�body�and�frosted�glass�lens.
technical specification input voltage220�-�240Vac
lamp typePLC�lamp
wattagemax.�26W
lamp holderG24D-3
insulation classclass�1
ingress protectionIP44
maximum weight3.2�kg�(complete�with�gear)
photometric
application •�historical�buildings•�churches•�theatres•�museums•�passageways•�corridors�areas•�exhibitions�halls
order code
model lamp type lamp holder order code
FAGON�W100503�PLC18w� PLC18w� G24d-2� FAGON�W100503-PLC0018 FAGON�W100503�PLC26w� PLC26w� G24d-3� FAGON�W100503-PLC0026
note�:�specifications�are�subject�to�change�without�prior�notice
245 106
260
page 145
anglo
order code
model lamp type lamp holder order code
ANGLO�P110402� Halogen�MR16�max.�50w� GU5.3� ANLGO�P110402�Halogen�/�LED� � LED�MR16�3W-6WANGLO�P110403� Halogen�MR16�max.�50w� GU5.3� ANLGO�P110403�Halogen� � /� LED � � LED�MR16�3W-6W� �
note�:�specifications�are�subject�to�change�without�prior�notice
anglo P110402 & P110403 (with�glare�shield) features •��a�portable�garden�light�ground�spike�symmetrical�light�distribution�with�full�shielded�light�source�providing�glare�free.
•��extruded�aluminium�column. �Die-cast�aluminium�housing�with �high�corrosion�resistance.Stainless�steel�screws.�Durable�siliconerubber�gasket.�Clear�tempered�glass�visor.�Epoxy�Powder�paint�with�high�corrosion�resistance�and�protection.
•��this�popular�garden�spike�
spotlight�offers�a�comprehensive�range�of�lighting�options.�The�small�unobtrusive�exterior�fitting�offers�complete�vertical�and�horizontal�adjustment�and�has�been�designed�to�operate�with�GU5.3�Halogen�lamps�or�GU5.3�LED�lamps.
technical specification input voltage220�-�240Vac
lamp typeMR16�Halogen�lamp�&�MR16�LED�lamp�(available�upon�request)
wattagemax.�50W
lamp holderGU5.3
insulation classclass�1
ingress protectionIP65
maximum weight0.65�kg��P1104021.2�kg��P110403
application •�gardens•�residential�areas•�resorts•�hotel�premises•�parks•�bushes
90
note : photometric result tested based on 50w MR16 Halogen lamp
0
±180
-90
915.79
732.63
549.47
366.32
183.16
dimension photometric
100
100 136
525
100 136
P110402 P110403
P110403
P110402
page 147
bulbous
bulbous G120601 & G120606
Ø220 Ø220
Ø157
267
43
dimension
features •��this�ground�recesses�luminaires �with�symmetrical�light�distribution �is�designed�for�high�intensity����discharge�lamps.
•��the�symmetrical�reflector�is�
made�of�anodized�high�purity�aluminium.
•��the�thermal�shock�resistant�safety��stepped�glass�lens�sealed�with�weatherproof�and�durable�molded�silicone�rubber�gasket.
•��corrosion�resistant�die-cast �aluminium�optical�housing�with �weather�resistant�epoxy�powder��coating�and�stainless�steel�screws�to�provide�the�superior�quality�finish�for�all�weather�conditions.
•��weatherproof�and�durable�
silicone�rubber�gasket�used�to�achieve�IP67�ingress�protection.
technical specification input voltage220�-�240Vac
lamp typeHID�lamp
wattage35w�-�70w
lamp holderG8.5
insulation classclass�1
ingress protectionIP67
maximum weight5.0�kg�(complete�with�gear)
photometric
application •�building�facades•�parks•�bushes•�garden•�passageways•�walkways
order code
model housing colour lamp type lamp holder order code
BULBOUS�G120601�MH35w� black� tubular� G8.5� BULBOUS�G120601-M0035 BULBOUS�G120601�MH70w� black� tubular� G8.5� BULBOUS�G120601-M0070BULBOUS�G120606�MH35w� grey� tubular� G8.5� BULBOUS�G120606-M0035BULBOUS�G120606�MH70w� grey� tubular� G8.5� BULBOUS�G120606-M0070
note�:�specifications�are�subject�to�change�without�prior�notice���*M:�Metal�halide
page 149
dimension
features •��this�ground�recesses�luminaires�with�symmetrical�light�distribution�is�designed�for�high�intensity����discharge�lamps.
•��the�symmetrical�reflector�is�made�of�anodized�high�purity�aluminium.
•��the�thermal�shock�resistant�safety�stepped�glass�lens�sealed�with�weatherproof�and�durable�molded��silicone�rubber�gasket.
•��corrosion�resistant�die-cast �aluminium�optical�housing�with �weather�resistant�epoxy�powder���coating�and�stainless�steel�screws�to�provide�the�superior�quality�finish�for�all�weather�conditions.
•�weatherproof�and�durable�silicone��� rubber�gasket�used�to�achieve��� IP67�ingress�protection.
technical specification input voltage220�-�240Vac
lamp typeHID�lamp
wattage35w�-�70w
lamp holderG8.5
insulation classclass�1
ingress protectionIP67
maximum weight5.0�kg�(complete�with�gear)
photometric
application •�building�facades•�parks•�bushes•�garden•�passageways•�walkways
order code
model housing colour lamp type lamp holder order code
BULBOUS�G120602�MH35w� black� tubular� G8.5� BULBOUS�G120602-M0035 BULBOUS�G120602�MH70w� black� tubular� G8.5� BULBOUS�G120602-M0070BULBOUS�G120607�MH35w� grey� tubular� G8.5� BULBOUS�G120607-M0035 BULBOUS�G120607�MH70w� grey� tubular� G8.5� BULBOUS�G120607-M0070
note�:�specifications�are�subject�to�change�without�prior�notice���*M:�Metal�halide
Ø220 Ø220
Ø157
267
43bulbous G120602 & G120607
bulbous G120603 & G120608
dimension
features •��this�ground�recesses�luminaires�with�symmetrical�light�distribution�is�designed�for�high�intensity����discharge�lamps.
•��the�symmetrical�reflector�is�made�of�anodized�high�purity�aluminium.
•��the�thermal�shock�resistant�safety���stepped�glass�lens�sealed�with���weatherproof�and�durable�molded��silicone�rubber�gasket.
•��corrosion�resistant�die-cast�aluminium�optical�housing�with�weather�resistant�epoxy�powder�coating�and�stainless�steel�screws�to�provide�the�superior�quality�finish�for�all�weather�conditions.
•�weatherproof�and�durable�silicone��� rubber�gasket�used�to�achieve��� IP67�ingress�protection.
technical specification input voltage220�-�240Vac
lamp typeHID�lamp
wattage35w�-�70w
lamp holderG8.5
insulation classclass�1
ingress protectionIP67
maximum weight5.0�kg�(complete�with�gear)
photometric
application •�building�facades•�parks•�bushes•�garden•�passageways•�walkways
order code
model housing colour lamp type lamp holder order code
BULBOUS�G120603�MH35w� black� tubular� G8.5� BULBOUS�G120603-M0035 BULBOUS�G120603�MH70w� black� tubular� G8.5� BULBOUS�G120603-M0070BULBOUS�G120608�MH35w� grey� tubular� G8.5� BULBOUS�G120608-M0035 BULBOUS�G120608�MH70w� grey� tubular� G8.5� BULBOUS�G120608-M0070
note�:�specifications�are�subject�to�change�without�prior�notice���*M:�Metal�halide
Ø220 Ø220
Ø157
267
43
page 151
bulbous G120604 & G120609
dimension
features •��this�ground�recesses�luminaires�with�symmetrical�light�distribution�is�designed�for�high�intensity����discharge�lamps.
•��the�symmetrical�reflector�is�made�of�anodized�high�purity�aluminium.
•��the�thermal�shock�resistant�safety�stepped�glass�lens�sealed�with�weatherproof�and�durable�molded�silicone�rubber�gasket.
•��corrosion�resistant�die-cast �aluminium�optical�housing�with �weather�resistant�epoxy�powder���coating�and�stainless�steel�screws�to�provide�the�superior�quality�finish�for�all�weather�conditions.
•��weatherproof�and�durable�silicone�rubber�gasket�used�to�achieve���IP67�ingress�protection.
technical specification input voltage220�-�240Vac
lamp typeHID�lamp
wattage35w�-�70w
lamp holderG8.5
insulation classclass�1
ingress protectionIP67
maximum weight5.3�kg�(complete�with�gear)
photometric
application •�building�facades•�parks•�bushes•�garden•�passageways•�walkways
order code
model housing colour lamp type lamp holder order code
BULBOUS�G120604�MH35w� black� tubular� G8.5� BULBOUS�G120604-M0035 BULBOUS�G120604�MH70w� black� tubular� G8.5� BULBOUS�G120604-M0070BULBOUS�G120609�MH35w� grey� tubular� G8.5� BULBOUS�G120609-M0035 BULBOUS�G120609�MH70w� grey� tubular� G8.5� BULBOUS�G120609-M0070
note�:�specifications�are�subject�to�change�without�prior�notice���*M:�Metal�halide
230
Ø213
280
62
bulbous G120605 & G120610
90
note : photometric result tested based on 6300lm MH70w
0
±180
-90
692.86
554.29
415.72
277.14
138.57
dimension
features •��this�ground�recesses�luminaires�with�symmetrical�light�distribution�is�designed�for�high�intensity����discharge�lamps.
•��the�symmetrical�reflector�is�made�of�anodized�high�purity�aluminium.
•��the�thermal�shock�resistant�safety�stepped�glass�lens�sealed�with�weatherproof�and�durable�molded�silicone�rubber�gasket.
•��corrosion�resistant�die-cast �aluminium�optical�housing�with �weather�resistant�epoxy�powder���coating�and�stainless�steel�screws�to�provide�the�superior�quality�finish�for�all�weather�conditions.
•�weatherproof�and�durable�silicone��� rubber�gasket�used�to�achieve��� IP67�ingress�protection.
technical specification input voltage220�-�240Vac
lamp typeHID�lamp
wattage35w�-�70w
lamp holderG8.5
insulation classclass�1
ingress protectionIP67
maximum weight5.3�kg�(complete�with�gear)
photometric
application •�building�facades•�parks•�bushes•�garden•�passageways•�walkways
order code
model housing colour lamp type lamp holder order code
BULBOUS�G120605�MH35w� black� tubular� G8.5� BULBOUS�G120605-M0035 BULBOUS�G120605�MH70w� black� tubular� G8.5� BULBOUS�G120605-M0070BULBOUS�G120610�MH35w� grey� tubular� G8.5� BULBOUS�G120605-M0035 BULBOUS�G120610�MH70w� grey� tubular� G8.5� BULBOUS�G120605-M0070
note�:�specifications�are�subject�to�change�without�prior�notice���*M:�Metal�halide
230
Ø213
280
62
page 153
lamp table Lamps are subject to constant technical development and improvement. Therefore we expressly advise you to consult the latest technical
data sheets issued by the lamp manufacturers. This applies in particular to data relating to the burning position, operating current and starting
characteristics of the lamp manufacturers. We assume no liability for its completeness and validity. ]
Halogen-lamps
Wattage�(W)� Socket� Voltage�(V)� Half�Peak�� Correlated�colour�� Colour�rendering�� Luminous� Diameter� Lenght�� Av.life��������������������
Value�(�˚�)���� temperature�(k)� index�(ra)� flux�(lm)
(mm)
(mm)
(h)
25� GY6.35� 12� �—� 3000� 100� 500� 12� 44� 4000
35� GY6.35� 12� —� 3000� 100� 900� 12� 44� 4000�
50� GY6.35� 12� —� 3000� 100� 1250� 12� 44� 4000
10� G4� 12� —� 3000� 100� 130� 9� 33� 4000�
20� G4� 12� —� 3000� 100� 320� 9� 33� 4000�
35� GY6.35� 12� —� 3000� 100� 600� 12� 44� 4000
50� GY6.35� 12� —� 3000� 100� 910� 12� 44� 4000�
75� GY6.35� 12� —� 3000� 100� 1450� 12� 44� 4000
90� GY6.35� 12� —� 3000� 100� 1800� 12� 44� 4000
150� B15d� 240� —� 2900� 100� 2500� 18� 86� 2000�
250� B15d� 240� —� 2900� 100� 4350� 18� 98� 2000
300� R7s� 240� —� 3000� 100� 5300� 12� 114� 2000
500� R7s� 240� —� 3000� 100� 9500� 12� 114� 2000�
1000� R7s� 240� —� 3000� 100� 22000� 12� 186� 2000
Halogen-lamps
Wattage�(W)� Socket� Voltage�(V)� Half�Peak�� Correlated�colour�� Colour�rendering�� Luminous� Diameter� Lenght�� Av.life��������������������
Value�(�˚�)�� temperature�(k)� index�(ra)� flux�(lm)
(mm)
(mm)
(h)
20� GU4� 12� 10� 3200� 100� 4800� 35� 37� 4000�
20� GU4� 12� 30� 3200� 100� 800� 35� 37� 4000�
35� GU5.3� 12� 10� 3000� 100� 12500� 51� 45� 4000
35� GU5.3� 12� 24� 3000� 100� 4400� 51� 45� 4000
35� GU5.3� 12� 38� 3000� 100� 2200� 51� 45� 4000
35� GU5.3� 12� 60� 3000� 100� 1100� 51� 45� 4000�
50� GU5.3� 12� 10� 3000� 100� 15000� 51� 45� 4000
50� GU5.3� 12� 24� 3000� 100� 5700� 51� 45� 4000
50� GU5.3� 12� 38� 3000� 100� 2850� 51� 45� 4000
50� GU5.3� 12� 60� 3000� 100� 1430� 51� 45� 4000
20� BA15d� 12� 8� 3000� 100� 7700� 70� 50� 3000
20� BA15d� 12� 24� 3000� 100� 900� 70� 50� 3000�
50� BA15d� 12� 8� 3000� 100� 12500� 70� 50� 3000
50� BA15d� 12� 24� 3000� 100� 2600� 70� 50� 3000
Fluorescent - lamps
Wattage�(W)� Socket� Voltage�(V)� Half�Peak�� Correlated�colour�� Colour�rendering�� Luminous� Diameter� Lenght�� Av.life��������������������
Value�(�˚�)���� temperature�(k)� index�(ra)� flux�(lm)
(mm)
(mm)
(h)
24� G5� —� —� �3000� 80...90� 1750� —� 549� 20000
24� G5� —� —� 4000� 80...90� 1750� —� 549� 20000�
54� G5� —� —� 3000� 80...90� 4450� —� 1149� 20000�
54� G5� —� —� 4000� 80...90� 4450� —� 1149� 20000�
Metal-halide-lamps / High pressure sodium lamps
Wattage�(W)� Socket� Voltage�(V)� Half�Peak�� Correlated�colour�� Colour�rendering�� Luminous� Diameter� Lenght�� Av.life��������������������
Value�(�˚�)���� temperature�(k)� index�(ra)� flux�(lm)
(mm)
(mm)
(h)
20� PGJ5� —� —� 3000� 85� 1615� 17.3� 52� 4000� �
35� G8.5� —� —� 3000� 81� 3300� 14� 85� 9000�
35� G8.5� �—� —� 4200� 85� 3200� 14.5� 85� 6000�
70� G8.5� —� —� 3000� 83� 6600� 14� 85� 6000
70� G8.5� —� —� 4200� 90� 6000� 14.5� 85� 6000
35� G12� —� —� 3000� 81� 3300� 20� 100� 12000
70� G12� —� —� 3000� 81� 6600� 20� 100� 12000
70� G12� —� —� 4200� 92� 6600� 20� 100� 12000�
150� G12� —� —� 3000� 85� 14000� 20� 110� 12000
150� G12� —� —� 4200� 96� 12700� 20� 110� 9000
250� G12� —� —� 3000� 89� 23000� 20� 135� 11000
250� E40� —� —� 4500� 65� 19000� 47� 257� —�
400� E40� —� —� 4200� 65� 35000� 47� 286� —
150� RX7s-24� —� —� 3000� 88� 13250� 24� 135.4� 16000
150� RX7s-24� —� —� 4200� 96� 14200� 24� 135.4� 16000�
250� Fc2� —� —� 3000� 80� 20000� 25� 63� 6000
250� Fc2� —� —� 4200� 85� 20000� 25� 63� 6000
400� Fc2� —� —� 5600� 85� 28000� 31� 206� 6000
250� E40� —� —� 2000� —� 33000� 46� 257� —�
400� E40� —� —� 2000� —� 55000� 46� 285� —
Compact fluorescent-lamps
Wattage�(W)� Socket� Voltage�(V)� Half�Peak�� Correlated�colour�� Colour�rendering�� Luminous� Diameter� Lenght�� Av.life��������������������
Value�(�˚�)���� temperature�(k)� index�(ra)� flux�(lm)
(mm)
(mm)
(h)
18� GX24d-2� —� —� 2700� 85� 1200� —� 116� 10000
18� GX24d-2� —� —� 3000� 85� 1200� —� 116� 10000
18� GX24d-2� —� —� 4000� 85� 1200� —� 116� 10000
26� GX24d-3� —� —� 2700� 85� 1800� —� 131� 10000
26� GX24d-3� —� —� 3000� 85� 1800� —� 131� 10000
26� GX24d-3�� —� —� 4000� 85� 1800� —� 131� 10000�
32� GX24d-3� —� —� 2700� 85� 2400� —� 147� 10000
32� GX24d-3� —� —� 3000� 85� 2400� —� 147� 10000
32� GX24d-3� —� —� 4000� 85� 2400� —� 147� 10000
42� GX24d-4� —� —� 2700� 85� 3200� —� 168� 10000
42� GX24d-4� —� —� 3000� 85� 3200� —� 168� 10000
42� GX24d-4� —� —� 4000� 85� 3200� —� 168� 10000
page 155
accreditations & certifications
CE marking for ignitor
JKR Approval
CE marking for ballast
TNB Approval
ISO9001 : 2008 BV
ISO9001 : 2008 Standard Malaysia
InternationalISO�9001:2008�Quality�Management�System�Standards�certified�by�Bureau�Veritas�Certification�(BVC)�for�design,�development�and�manufacture�of�HID�ballast,�ignitor,�industrial�lightings�and�LED�lightings,�low�voltage�transformer�and�current�transformer�since�2004.Certificate�of�Type�Test�by�ASTA�Certificate�Services�(2002)�CE�Marking�on�products�for�street�lantern,�ballast,�ignitor,�isolating�transformer�and current�transformers�(2005)
DomesticISO�9001:2008�Quality�Management�System�since�1998SIRIM�Product�Type�Test�Certification�for�ballast,�ignitor,�street�lighting�and�floodlights�(1998)�JKR�approval�of�products�for�ballast�and�ignitor�(2005),�street�lighting�(2006)�TNB�approval�on�products�for�ballast�and�ignitor�(2006)�Superbrands�status�(2006)�
CE marking foe street lantern
Sirim Certificate
For�LED�products�&�Transformer�products�information,�kindly�refer�to�www.success.com.my�or�email�to�[email protected]
success lighting catalogue_1, ‘13.09
2014 series
ind
ust
ria
l lig
hti
ng
• c
om
me
rcia
l lig
hti
ng
• i
nd
ust
ria
l lig
hti
ng
• c
om
me
rcia
l lig
hti
ng
• i
nd
ust
ria
l lig
hti
ng
• c
om
me
rcia
l lig
hti
ng
• i
nd
ust
ria
l
Success Electronics & Transformer Manufacturer Sdn Bhd (200853-k)A wholly owned subsidiary of Success Transformer Corporation Berhad.
Headquarters:No. 3,5 & 7 Jalan TSB 8, Taman Industri Sungai Buloh, 47000 Sungai Buloh, Selangor Darul Ehsan, West Malaysia.t: +603-6157 2788/ 2785/ 2787 f:+603-6157 2722 / 2723 e: [email protected] w: www.success.com.my
Australia sales office (ABN:80143481958)
Nikkon Lighting Pty. Ltd.Unit 3013 Artisan Road, Seven Hills 2147 NSW, Australiat: +61296209036, +61296245845 f: +61296209037 e: [email protected] w: www.nikkonlighting.com.au
Kenya sales office:Nikkon Success Kenya Ltd.P.O. Box 27803-00100 Nairobi, Alpha Centre, Mombasa Road, Godown No. 40, Kenyat: +25420-820015 +25457-2515275 f: + 25420-820025 e: [email protected] w: www.nsk.co.ke
Singapore sales office:Nikkon Lighting & Electrical Pte. Ltd. (201117228-C)
No. 7, Kaki Bukit Road 1, #03-15 Eunos Technolink, Singapore 415937t: +6567424377 f: +6567424366 e: [email protected]
Indonesia sales office:PT Boxon Nikkon JayaindoRuko B-6, Kav. Angkasa, Jl. Kemayoran, Mega Blok Super No.19, E Blok
t: +62-21 29070438 Line) (Hunting f: +62-21 29070439 e: [email protected] w: www.nikkonlighting.co.id
Thailand sales office:Nikkon Lighting (Thailand) Co., Ltd317 Kamolsukosol Building, Unit 8E, 8Fl, Silom Rod, Khet Bangrak, Bangkoke: [email protected] w: www.nikkonlighting.co.th
2014 series
Kota Indonesia. 10610, Pusat Jakarta Kemayoran, Bandar Baru