Thermo Scientific NIST Traceable Particle Size Standards 3000, 4000, 8000, 9000 Series Thermo Scientific NIST Traceable Particle Size Standards are traceable to the Standard Meter through the National Institute of Standards and Technology (NIST). This enables laboratories to demonstrate the traceability of their analytical methods as required by ISO 9000, ISO 10012, ANSI/NCSL Z540, GMP/ GLP and other standards and regulations. Applications include microscopy, light scattering and colloidal systems, and checking bacterial, viral, ribosomal and other sub-cellular components. • NIST traceability enables instrument calibration with very narrow standard deviations • Solves real-world analytical problems by validating product performance and results • NIST traceable mean diameter provides objective evidence of diameter calibration during audits of your measurement systems • Superior particle diameter uniformity ensures tight size distribution of the particle population to provide more exact calibration points when setting the calibration curve • Excellent product stability results in confident instrument performance and compliance with most QC programs Thermo Scientific NIST Traceable Particle Size Standards provide third party traceability of calibration procedures to national and international agencies through an unbroken chain of measurements with specified uncertainties. The particles are also used to develop and test analytical instruments for particle size characterization of materials. Available as uniform spheres in a range of discrete sizes from 20 nm to 2000 µm, these uniformly shaped particles minimize the response of analytical systems to shape effects. Each package of standards contains a Certificate of Calibration and Traceability to NIST, as well as a Material Safety Data Sheet (MSDS) with handling and disposal instructions. All packages are lot numbered for convenient after-the-sale technical service and support. Product Specifications 3000 Series Nanosphere Size Standards come in optimized concentrations for easy dispersal and colloidal stability 4000 Series Monosized Polymer Particles are excellent calibration materials with narrow diameter standard deviations 8000 Series Silica Particles have a higher mechanical and thermal stability than polystyrene microparticles 9000 Series Glass Particles are suitable for a wide variety of particle measurement applications
Transcript
Thermo ScientificNIST Traceable Particle Size Standards3000, 4000, 8000, 9000 Series
Thermo Scientific NIST Traceable Particle Size Standards are traceable to the Standard Meter through the National Institute of Standards and Technology (NIST). This enables laboratories to demonstrate the traceability of their analytical methods as required by ISO 9000, ISO 10012, ANSI/NCSL Z540, GMP/GLP and other standards and regulations. Applications include microscopy, light scattering and colloidal systems, and checking bacterial, viral, ribosomal and other sub-cellular components.
