Nitson Kymore CPP ERECTION DEVIATION

1 .

document.xls : Annex-II - Supply AAA/ ELEC 29.12.2005

ANNEXURE-II

Item Description Units Qty.

SUPPLY

TOTAL

1.0.0 EQUIPMENT

1.1.0 LT Switchgear and Panels

1.1.1

1) No. 1 140,000 140,000

2) No. 1

310,000 310,000

3) Nos. 4

22,300 89,200

1.2.0 Local Control Stations -

1.2.1

-

1) -

a) with 200 -- 1200A Nos 3 4000 12,000

b) with 125 -- 750A Nos 1 4000 4,000

c) with 20 -- 120 A Nos 5 4000 20,000

d) with 30 -- 180A Nos 7 4000 28,000

e) with 60 -- 360A Nos 5 4000 20,000

f) with 250 -- 1500A Nos U/R 4000

g) with 75 -- 450A Nos U/R 4000

h) with 400 - 2400A Nos. 3 4000 12,000

2) Nos. 15 2150 32,250

Schedule of Quantities and Rates of Erection Material for Electrical Jobs at Kymore 25MW CPP Project

Sl. No.

UNIT RATE(in

Rs)

Supply of LT switchboards - as follows:-Main Lighting DB as per attached single line diagram.(rev-R0), Dwg.No.00-6454-E-201 I/C 250A 2No.s with El;ectrucal & Mechanical DC starter resistance panel for 15 KW 110V DC motor (3 steps with timer, including resistance box) for EOP.

24V AC DB which includes 240V/ 24V AC,500VA,control transformer with 1 no. 10A SPN MCB for Trf I/C and 32A SPN MCB for Trf O/G and 4nos. 10A 24V AC socket outlet with MCB's.(for hand lights)

Supply of industrial type Local Control Stations (push button stations) on steel structures/concrete column/wall excluding supply of steel structure supports but including necessary hardwares, painting with supply of paints, all labour and materials complete as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.

Industrial weather proof Start & Stop (Stayput type) PBS with ammeter with canopy (Type A)

Industrial weatherproof start & stop (Stayput type) PBS without ammeter with canopy (Type B)

2 .



SUPPLY

TOTALSl. No.

UNIT RATE(in

Rs)3) Nos. 10

2650 26,500

4) Nos. 5 1950 9,750

5) Nos. U/R

10300

6) Nos. U/R

5400

7) Nos. 15

3400 51,000

1.3.0 Welding and Industrial Receptacles -

1.3.1

-

1) 81410 11,280

2) 101410 14,100

3) 8 8150 65,200

4) U/R8150

5) 8 1500 12,000

6) 16A MCB with sheet steel enclosure 12 1170 14,040

7) U/R 1410

1.4.0 Junction Boxes -

Industrial type forward, reverse and stop (Stayput type) PBS without ammeter without canopy (Type C)Mushroom type emergency stop PB without ammeter (Type-D)Industial weatherproof P.B.station with 1nos. forward P.B.,1nos reverse P.B., 2nos. gate open and 2nos. gate close P.B., and 1no mushroomhead type P.B. (press to stop & turn to release) and 1 no. spring return PB. ( Type -E)

Industrial weatherproof start, stop (stay put type) and emergency stop PB with ammeter with canopy. (F- type)

Industrial weatherproof start, stop (stay put type), raise, lower PB without ammeter with canopy.( G - type )

Supply of industrial / weatherproof metal clad SPN / TP+E socket outlet with chained plug top and MCB in sheet steel enclosure with earth connection, provision of necessary hardwares, carrying out civil works, all labour and materials complete as per approved drawings, specifications of this tender and directions of Engineer-in-Charge

Industrial type single phase 10 A sockets with 10 A SPN MCB with decorative face plate (RB-1).

Nos.

Industrial type single phase 16A sockets with 16A SP MCB. RB2

Nos.

Industrial type TP + E 63 A sockets with 63 A TP MCB (RC-1)

No.

Industrial weather proof TP + E 63 A sockets with 63 A SPN MCB. (RC2)

No.

10A SP industrial switch in sheet steel enclosure (for lighting control)

No.

No.

Industrial type weather proof 16A socket with 16A SPN MCB (RB3)

No.

3 .



SUPPLY

TOTALSl. No.

UNIT RATE(in

Rs)

-

1.4.1 Nos.4 1400 5,600

1.4.2 No. U/R 2000

1.4.3 Nos. 4 2000 8,000

1.4.4 No. U/R 3500

1.4.5 Nos.

4 1200 4,800

1.5.0 Canopies -

1.5.1 kg U/R90

1.6.0 Safety Equipment -

1.6.1 -

1) Nos. 8 600 4,800

2) Nos.6 600 3,600

3) Nos. 2550 1,250

4) Hand-gloves Pairs 12 300 3,600

5) Earthing Rod Nos. 2 1000 2,000

6) Fire Extinguisher of different types -

a) No.s 5 800 4,000

b) Co2 type Nos. 10 5500 55,000

c) Dry Chemical type Nos. 10 3000 30,000

Supply of weather proof junction boxes in sheet steel housing with canopy (2.5 mm thick) for PVC armoured control cables suitable for outdoor location painted with aproved shade supply of paints complete with power/ control terminals suitable for following sizes of conductor as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.

Type JB-1 with 30 Nos. control terminals for 1.5 sq.mm, Cu

Type JB-2 with 45 Nos. Control terminals for 1.5 sq.mm, Cu.Type JB-3 with 50 Nos. Control terminals for 1.5 sq.mm, Cu.Type JB-4 with 100 Nos. Control terminals for 1.5 sq.mm, Cu.Type JB-5 with 16 Nos power terminals suitable for 1No 4cx10 sq.mm AL XLPE cable for I/c and 3 Nos 4c x 10 sq. mm AL XLPE o/g cables.

Supply of 2 mm sheet steel for fabrication of canopies or control/PB stations as per approved drawings, specifications of this tender and

Supply of following safety equipment as per directions of Engineer-in-ChargeShock hazard charts complete with frame and glassFirst aid boxes with requisite Medicines as per standards

Caution boards as per IS:2251 including supply of necessary clamps, bolts and other hardware

Fire sand Buckets with stand (4 Buckets in each Stand)

4 .



SUPPLY

TOTALSl. No.

UNIT RATE(in

Rs)1.6.2

-

1) M U/R 1190

2) M 25 1190 29,750

3) M 50 550 27,500

1.7.0 Termination Kits -

1.7.1

-

1) 1C x 630 sq.mm, XLPE, Cu Nos. 56 3200 179,200

3) 3C x 300 sq.mm Nos. 9 11500 103,500 1.7.2

-

1 3C x300sq.mm, XLPE, Al Nos. 4 7870 31,480

2 1C x 630 sq.mm, XLPE, Al Nos. 2 5380 10,760

1.8.0 Straight through joints -

1.8.1

-

-

1) Nos. U / R 560

2) Nos. U / R 850

3) Nos. U / R 1035

4) Nos. U / R 2440

1.8.2

-

11 kV, Power cable -

1 1C x 630 sq.mm Cu Nos. 38 16500 627,000

2 3C x 300 sq.mm Al Nos. U/R 32000

Supply of ISI marked 900 mm wide, rubber floor mats required for maintenance of panels as required as per directions of Engineer-in-Charge For HT panels -20mm thick (6.6 kV Grade)For HT panels -20mm thick (11kV Grade)For LT panels - 6mm thick (1.1kV Grade)

Supply of 11kV heat shrinkable indoor type Raychem / Mahindra (M - seal) termination kits (type as per tender spec.), as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.

Supply of 6.6 kV indoor type Raychem / Mahindra (M - seal) termination kits (type as per tender spec.), as per approved drawings,

Supply of Raychem / Mahindra make staight through jointing kits and accessories for LT Power Cables of the following sizes as per approved drawings, specifications of this tender and directions of Engineer-in-Charge

LT Power Cable (1100 V grade XLPE)Cables upto 3 cores and from 10 to 25 sq.mmCables upto 3 cores and from 35 to 70 sq.mmCables upto 3 cores and from 95 to 150 sq.mmCables upto 3 cores and from 185 to 400 sq.mmSupply of Raychem / Mahindra (M - seal) jointing kit for following sizes as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. (All straight

5 .



SUPPLY

TOTALSl. No.

UNIT RATE(in

Rs)1.8.3

-

6.6 kV Power Cables -

1 3C x 300 sq.mm, XLPE, Al U/R 21750

2 1C x 630 sq.mm, XLPE, Al U/R 10900

1.9.0 G.I. Pipes / Conduit -

1.9.1 -

1) 19 mm NB M U/R 100

2) 40 mm NB M U/R 190

3) 65 mm NB M U/R 350

4) 100 mm NB M 40 700 28,000

5) 150 mm NB M U/R 1050

2.0.0 Structural Steel -

2.1.0

-

1) ISMC 150 kg U/R 35

2) ISMC 100 kg 6000 35 210,000

3) ISA 65 kg 7600 35 266,000

4) ISA 50 kg 6000 35 210,000

5) chequered plate 6 mm Thk. MS kg 3000 40 120,000

3.0.0 Cable Trays -

3.1.1

-

1 150 mm wide (Ladder type) M 100 530 53,000

Supply of 6.6 kV straight through joints for 6.6 kV (UE) grade cables of the following sizes including all labour and materials complete as per approved drawings, specifications of

Supply of follow-ing sizes of class B GI pipe as per approved drawings, specifica-tions of this tender and direction of Engineer-in-Charge

Supply of Rolled sections (Angles, Channels, I Beams), Flats & Plates, MS Pipes & Sleeves for switchgear, push buttons and brackets for miscellaneous electrical equipment, cable and cable tray supports as per approved drawings, specifica-tions of this tender and directions of Engineer-in-Charge. (Any item weighing upto 1 Kg or less shall neither be measured nor paid)

Supply of pre-fabricated ladder/perforated hot dip galvanised steel channel type cable trays with fittings such as tees, bends (horizontal & vertical) cross etc. including transportation, all labour and materials complete as per drawings, specifications and directions of Engineer-in-Charge

6 .



SUPPLY

TOTALSl. No.

UNIT RATE(in

Rs)2 300 mm wide(Ladder type) M 2400 550 1,320,000

3 450 mm wide (Ladder type) M 500 630 315,000

4 600 mm wide (Ladder type) M 3200 660 2,112,000

5 750 mm wide(Ladder type) M U / R 780

6 150 mm wide(perforated type) M 35 300 10,500

7 300 mm wide(perforated type) M 700 445 311,500

B)

-

1) M 100 430 43,000

2) M 100 260 26,000

3) M 50 540 27,000

4) M 125 1000 125,000

5) M 395 1320 521,400

6) M 550 1110 610,500

3.1.2 Cable tray Accessories -

1 Nos. 75 1485 111,375

2 Nos. 3 1650 4,950

3 Nos. 50 1485 74,250

4 Nos. U/R 1650

5 Horizontal 600W 30 deg. Bend Nos. U/R 1485

6 Nos. 60 1240 74,400

7 Nos. U/R 1240

8 Nos. 4 1000 4,000

9 Nos. U/R 1000

10 Nos. 3 1125 3,375

11 Nos. U/R 1125

12 Nos. U/R 1125

13 Tee 600W Nos. U/R 1980

Supply of prefabricated FRP cable trays, ladder / perforated type complete with all necessary accessories such as coupler plates, nuts, bolts, washers, clamps, horizontal/vertical bends, horizontal/vertical tees, reducers, etc., including all labour and

100 mm wide FRP cable tray (perforated type)50 mm wide FRP cable tray (perforated type)150 mm wide FRP cable tray (perforated type)150 mm wide FRP cable tray (ladder type)600 mm wide FRP cable tray (ladder type)300 mm wide FRP cable tray (ladder type)

Horizontal 600W 90 deg. Bend (R-600)Horizontal 600W 90 deg. Bend (R-1050)Horizontal 600W 45 deg. Bend ( R-600)Horizontal 600W 45 deg. Bend ( R-1050)

Horizontal 300W 90 deg. Bend (R-600)Horizontal 300W 45 deg. Bend (R-600) Horizontal 300W 45 deg. Bend (R-600) Perforated TypeHorizontal 300W 30 deg. Bend

Horizontal 150W 90 deg. Bend (R-600)Horizontal 150W 45 deg. Bend

Horizontal 150W 30 deg. Bend

7 .



SUPPLY

TOTALSl. No.

UNIT RATE(in

Rs)14 Tee 300W Nos. U/R 1650

15 Tee 150W Nos. U/R 1500

16 Nos. 10 1650 16,500

17 Nos. 40 1980 79,200

18 Nos. 90 1485 133,650

19 Nos. 50 1240 62,000

20 Nos. 7 1000 7,000

21 Nos. 5 1650 8,250

22 2 1125 2,250

23 Nos. 15 1650 24,750

24 Nos. 50 1485 74,250

25 Nos. U/R 1485

26 Nos. 45 1240 55,800

27 Nos. U/R 1240

28 Reducer 600-300 Nos. 5 400 2,000

29 Reducer 600-150 Nos. U/R 360

30 Reducer 300-150 Nos. U/R 400

31 Reducer 600-450 Nos. U/R 430

32 FRP vertical 45° 150 mm wide Nos. 4 760 3,040

33 Nos. 10 800 8,000

34 Nos. 10 450 4,500

35 Nos. 10 800 8,000

36 Nos. 10 450 4,500

37 Nos. 15 3450 51,750

38 Nos. 5 4700 23,500

39 Nos. 10 2600 26,000

40 Nos. 25 2850 71,250

41 Nos. 5 2100 10,500

Horizontal Tee 300 mm Wide ladder type (R-600)Horizontal 90° Tee 600 mm wide(R-600)External Vertical 600W 90 deg. Bend (R-600)External Vertical 300W 90 deg. Bend (R-600)External Vertical 300W 90 deg. Bend (R-600) Perforated TypeExternal Vertical 600W 90 deg. Bend (R-1050)External Vertical 150W 90 deg. Bend (R-600)External Vertical 600W 45 deg. Bend ( R-1050)External Vertical 600W 45 deg. Bend (R-600)External Vertical 600W 30 deg. Bend

External Vertical 300W 45 deg. Bend (R-600)External Vertical 300W 30 deg. Bend

FRP 90° bend (inner) for 100 mm wide trayFRP 90° bend (inner) for 50 mm wide trayFRP 90° bend (Outer) for 100 mm wide trayFRP 90° bend (Outer) for 50 mm wide trayHorizontal 600W 90 deg. Bend (R-600) (FRP)Horizontal 600W 90 deg. Bend (R-1050) (FRP)Horizontal 600W 45 deg. Bend (R-600) (FRP)Horizontal 300W 90 deg. Bend (R-600) (FRP)Horizontal 300W 90 deg. Bend (R-300) (FRP)

8 .



SUPPLY

TOTALSl. No.

UNIT RATE(in

Rs)42 Nos. 60 2150 129,000

43 Horizontal 300W 30 deg. Bend (FRP) Nos. U/R 1650

44 Nos. 10 2540 25,400

45 Nos. 5 1900 9,500

46 Nos. 5 1950 9,750

47 Nos. 35 3450 120,750

48 Nos. 5 4600 23,000

49 Nos. 5 3450 17,250

50 Nos. 35 2600 91,000

51 Nos. 5 2850 14,250

52 Nos. 14 2100 29,400

53 Nos. 60 2150 129,000

54 Nos. 8 1650 13,200

55 Nos. 6 1420 8,520

56 Reducer 600-300 (FRP) Nos. 4 2300 9,200

KG U/R

90

4.0.0 Cable Glands -

4.1.0

-

2) 3C x 300 sq.mm Al Nos 12 800 9,600

3) 1C x 630 sq.mm Cu Nos 56 195 10,920

Horizontal 300W 45 deg. Bend (R-600) (FRP)

Horizontal 150W 90 deg. Bend (R-600) (FRP)Horizontal 150W 90 deg. Bend (R-300) (FRP)Horizontal 150W 45 deg. Bend (R-600) (FRP)External Vertical 600W 90 deg. Bend (R-600) (FRP)External Vertical 600W 90 deg. Bend (R-1050) (FRP)External Vertical 600W 45 deg. Bend ( R-1050) (FRP)External Vertical 600W 45 deg. Bend (R-600) (FRP)External Vertical 300W 90 deg. Bend (R-600) (FRP)External Vertical 300W 90 deg. Bend (R-300) (FRP)External Vertical 300W 45 deg. Bend (R-600) (FRP)External Vertical 300W 45 deg. Bend (R-300) (FRP)External Vertical 150W 45 deg. Bend (R-300) (FRP)

Supply of 1.6 mm GI sheet removable covers for cables and vertical cable trays including necessary hardwares and civil work including all labour and materials complete as per approved drawings, specifications of this tender and directions of Engineer-in-Charge

Supply of nickel-plated single compression type brass cable glands suitable for termination of 11 KV armoured XLPE cables of following sizes complete as per approved drawings, specifications of this tender and instructions of Engineer-in-Charge

9 .



SUPPLY

TOTALSl. No.

UNIT RATE(in

Rs)4.1.2

-

1) 3 C x 300 sq.mm, Al Nos. U/R 590

2) 1C x 630 sq.mm, Al Nos. U/R 1504.1.3

-

i) -

1 4C x 25 sq.mm, Al. No. 18 50 900

2 4C x 10 sq.mm, Al. Nos. U/R 40

3 4C x 16 sq.mm, Al Nos. U/R 50

4 3 C x 400 sq.mm, Al. Nos. 20 215 4,300

5 3 C x 300 sq.mm, Al. Nos. U/R 180

6 3 C x 120 sq.mm, Al. No. U/R 95

7 3 C x 185 sq.mm, Al. No. U/R 125

8 3 C x 95 sq.mm, Al. No. 4 70 280

9 3 C x 70 sq.mm, Al. No. 8 60 480

10 3 C x 35 sq.mm, Al. No. 8 50 400

11 3 C x 25 sq.mm, Al. No. 4 40 160

12 3 C x 16 sq.mm, Al. No. U/R 40

13 3 C x 10 sq.mm, Al. No. 2 30 60

14 2C x 50 sq.mm Al. No. U/R 50

15 3.5C x 35 sq.mm, Al. Nos. U/R 60

16 3C x 150 sq.mm, Al. Nos. U/R 125

17 3 C x 6 sq.mm, Cu. Nos. 8 30 240

18 3 C x 16 sq.mm Al Nos. U/R 40

Supply of nickel-plated single compression type brass cable glands suitable for termination of 6.6 KV armoured XLPE cables of following sizes complete as per approved drawings, specifications of this tender and instructions of Engineer-in-Charge

Supply of nickel-plated single compression type (for indoor equipment ends) and double compression type (for outdoor equipment & motor ends) brass cable glands suitable for terminations of armoured PVC cables of following sizes complete as per approved drawings, specifications of this tender and instructions of Engineer-in-Charge

XLPE LT Power Cables (Single Compression Type)

10 .



SUPPLY

TOTALSl. No.

UNIT RATE(in

Rs)

19 3 C x 4 sq.mm, Cu. Nos. U/R 30

20 3 C x 2.5 sq.mm, Cu Nos. 60 20 1,200

21 3 C x 185 sq.mm, Al. Nos. U/R 125

23 2C x 4 sq.mm Cu Nos. U/R 20

24 2C x 6 sq.mm, Cu Nos. U/R 30

27 3.5C x 70 sq mm,Al Nos. U/R 125

28 4C x 35 sq mm Cu Nos. U/R 70

29 4C x4 sq mm Cu Nos. U/R 30

30 4C x 2.5sq mm Cu Nos. U/R 30

31 4C x 25sq mm Al Nos. 15 50 750

32 4C x 50 sq mm Al Nos. U/R 70

33 4C x 120 sq mm Al Nos. 3 125 375

-

ii) -

1 2 C x 2.5 sq.mm,Cu. Nos. 50 15 750

2 2 C x 1.5 sq.mm Cu. Nos. U/R 15

3 4 C x 1.5 sq.mm, Cu. Nos. U/R 20

4 7 C x 1.5 sq.mm, Cu. Nos. 100 30 3,000

5 10 C x 1.5 sq.mm, Cu. Nos. U/R 40

6 12C x 1.5 sq.mm, Cu. Nos. U/R 40

7 19C x 1.5 sq.mm, Cu. Nos. U/R 50

8 24C x 1.5 sq.mm, Cu. Nos. U/R 60

9 27C x 1.5 sq.mm, Cu. Nos. U/R 60

10 37C x 1.5 sq.mm, Cu. Nos. U/R 95

11 4C x 2.5 sq mm, Cu. Nos. U/R 30

12 10C x 2.5 sq.mm Cu Nos. 50 50 2,500

13 5Cx 1.5 sq.mm Cu Nos. 52 30 1,560

iii) -

1 4C x 25 sq.mm, Al. No. 18 120 2,160

2 4C x 10 sq.mm, Al. Nos. U/R 95

3 4C x 16 sq.mm, Al Nos. U/R 95

4 3 C x 400 sq.mm, Al. Nos. 20 550 11,000

Control Cables (Single Compression Type)

XLPE LT Power Cables (Double Compression Type)

11 .



SUPPLY

TOTALSl. No.

UNIT RATE(in

Rs)

5 3 C x 300 sq.mm, Al. Nos. U/R 530

6 3 C x 120 sq.mm, Al. No. U/R 250

7 3 C x 185 sq.mm, Al. No. U/R 350

8 3 C x 95 sq.mm, Al. No. 4 230 920

9 3 C x 70 sq.mm, Al. No. 8 180 1,440

10 3 C x 35 sq.mm, Al. No. 8 115 920

11 3 C x 25 sq.mm, Al. No. 4 95 380

12 3 C x 16 sq.mm, Al. No. U/R 95

13 3 C x 10 sq.mm, Al. No. 2 95 190

14 2C x 50 sq.mm Al. No. U/R 95

15 3.5C x 35 sq.mm, Al. Nos. U/R 120

16 3C x 150 sq.mm, Al. Nos. U/R 300

17 3 C x 6 sq.mm, Cu. Nos. 8 78 624

18 3 C x 16 sq.mm Al Nos. U/R 95

19 3 C x 4 sq.mm, Cu. Nos. U/R 80

20 3 C x 2.5 sq.mm, Cu Nos. 60 70 4,200

21 3 C x 185 sq.mm, Al. Nos. U/R 350

23 2C x 4 sq.mm Cu Nos. U/R 80

24 2C x 6 sq.mm, Cu Nos. U/R 80

27 3.5C x 70 sq mm,Al Nos. U/R 200

28 4C x 35 sq mm Cu Nos. U/R 120

29 4C x4 sq mm Cu Nos. U/R 80

30 4C x 2.5sq mm Cu Nos. U/R 80

31 4C x 25sq mm Al Nos. 15 120 1,800

32 4C x 50 sq mm Al Nos. U/R 180

33 4C x 120 sq mm Al Nos. 3 300 900

iv) -

1 2 C x 2.5 sq.mm,Cu. Nos. 100 70 7,000

2 2 C x 1.5 sq.mm Cu. Nos. U/R 70

3 4 C x 1.5 sq.mm, Cu. Nos. U/R 70

4 7 C x 1.5 sq.mm, Cu. Nos. 150 80 12,000

5 10 C x 1.5 sq.mm, Cu. Nos. U/R 100

Control Cables (Double Compression Type)

12 .



SUPPLY

TOTALSl. No.

UNIT RATE(in

Rs)

6 12C x 1.5 sq.mm, Cu. Nos. U/R 100

7 19C x 1.5 sq.mm, Cu. Nos. U/R 140

8 24C x 1.5 sq.mm, Cu. Nos. U/R 140

9 27C x 1.5 sq.mm, Cu. Nos. U/R 170

10 37C x 1.5 sq.mm, Cu. Nos. U/R 200

11 4C x 2.5 sq mm, Cu. Nos. U/R 80

12 10C x 2.5 sq.mm Cu Nos. U/R 100

13 5Cx 1.5 sq.mm Cu Nos. 52 70 3,640

5.0.0 Cable Lugs -

5.1.1

-

I) Power Cable Lugs -

1 2.5 sq.mm, Cu. Nos. 600 2 1,200 2 4 sq.mm, Cu. Nos. U/R 43 6 sq.mm, Cu. Nos. U/R 54 10 sq.mm, Cu. Nos. U/R 55 16 Sq.mm, Cu. Nos. 20 6 120 6 35 Sq.mm, Cu. Nos. U/R 157 16 sq.mm, Al. Nos. U/R 38 25 sq.mm, Al. . Nos. 150 3 450 9 35 Sq.mm, Al. Nos. U/R 310 50 Sq.mm, Al. Nos. U/R 511 70 Sq.mm, Al. Nos. 10 7 70 12 95 sq.mm, Al. Nos. U/R 1013 120 Sq.mm, Al. Nos. 24 12 288 14 150 Sq.mm, Al. Nos U/R 1714 185 sq.mm, Al. Nos. U/R 2015 240 sq.mm, Al. Nos. U/R 3016 300 sq.mm, Al. Nos. 6 40 240 17 400 sq.mm, Al. Nos. 10 60 600

5.1.2 II) Control Cables -

1 2.5 sq.mm Cu. Nos. 4000 2 8,000

2 1.5 sq.mm Cu Nos. 6000 2 12,000

-

6.0.0 Cable Markers / Clamps -

Supply of crimping type tinned copper lugs /aluminium for following conductor sizes (excluding all labour and materials etc.) complete as per approved drawings, specifications of this tender & directions of Engineer-in-Charge

13 .



SUPPLY

TOTALSl. No.

UNIT RATE(in

Rs)6.1.0 Nos. U/R

250

6.1.2 Nos. U/R

250

6.1.3 Trefoil Cable Clamps -

Nos. 3900 15 58,500

6.1.4 Anchor fasteners -

-

1) M6 x 50mm Nos. U/R 8

2) M8 x 50mm Nos. U/R 12

3) M10 x 75mm Nos. U/R 20

4) M12 x 100mm Nos. U/R 27

-

7.0.0 LIGHTING - 7.1.1 Lighting Poles -

-

-

Supply of cable markers for underground cable runs as per approved drawings inclusive of providing and fixing supports on 18 SWG enamelled steel plate engraved with white letters "BURIED ELECTRIC CABLES" on jade green background.

Supply of cable markers for cable joints for underground cable runs inclusive of providing and fixing supports on 18 SWG enamelled steel plate engraved with white letters "HT CABLE JOINT" or "LT CABLE JOINT" or CONTROL CABLE JOINT as the case may be, on jade green background.

Supply of cable binder (FRP) for 11kV, 1C x 630sq.mm Al, armoured cable approximately at every 1 m.Supply, of metallic anchor fasteners for supporting cable trays of following sizes including labour and materials. Complete as approved by Engineer-in-

Supply of street lighting poles / flood lighting towers including of marshalling box (LM-6 type) and necessary wire / cable running from marshalling box to the lighting fixture, requisite brass double compression cable glands and tinned copper lugs (excluding supply of wire/cable & glands), cable termination and connection, necessary excavation, providing

concrete foundation, disposal of surplus earth, providing shoring, strutting, shuttering and dewatering if required and other civil works as required and including painting supply and fixing of 40 mm dia GI pipes, base plates, earthing material, all labour and materials as per specifications of this tender and directions of Engineer-in-Charge.

14 .



SUPPLY

TOTALSl. No.

UNIT RATE(in

Rs)1 Nos. 12 2900 34,800

2 2.2 M high lighting pole (P-1) Nos. 10 2300 23,000 3 2.2 M high lighting pole (Type W-1) Nos. 10 2300 23,000

7.2.0 Lighting Fixtures - 7.2.1

-

1 Nos. 10 1600 16,000

2 Nos. 145 1900 275,500

3 Nos. U/R

2250

4 Nos. U/R1000

5 Nos. 601280 76,800

6 Nos. 12 3600 43,200

7 Nos. U/R 2900

8 Nos. U/R regret

9 Nos. U/R 3840

10 Nos. 25 3520 88,000

11 Nos. 10 3000 30,000

12 Nos. 90 2200 198,000

13 Nos. 10 2840 28,400

14 Type-EL: Battery back-up ( 2 x 20W) Nos. 15 2200 33,000

15 Nos. 6 445 2,670

8.0.0 Switchboards / Boxes -

3 M high lighting pole with JB (Type P-4)

Supply of following lighting fixtures and connecting to point wiring junction box by directly cleating to the wall/ceiling complete with lamps and necessary control gear, glands, lugs including supply of all connected materials like clamps, ceiling rose, downrods, supports etc., as required, all labour and materials complete as per approved drawings, specifica-tions of this tender and directions of Engineer-in-Charge

Type-A1:Lighting with TH 1 x 40W FluorescentType-A2 : Lighting Fixture with 2 x 40 W fluorescent LampType-A3 : Lighting Fixture 4 x 20 W Fluorescent tube light, decorative type recess mounted for false ceiling (for Control room)

Type-B1 : Lighting Fixture with 1 x 40W Fluorescent Lamp decorating type.Type-B2 : Lighting Fixture with 1 x 40W Fluorescent Lamp decorating type.Type-C1: Industrial High Bay Fixture 1 x 250 W HPSVType-C2: Industrial High Bay Fixture 1 x 250 W HPMVType-C3: Industrial High Bay Fixture 1 x 500 W GLSType-D1 : Industrial medium bay Fixture 1 x 150 W HPSVType-D2 : Industrial medium bay Fixture 1 x 250 W HPMVType-E : Industrial Low bay Fixture ( 1 x 125W) HPMVType-M: Industrial Integral wellglass fixture (HPSV / HPMV Lamp)Type-H1: Street Lighting Fixture / Building periphery Lighting Fixture ( 1 x 70) HPSV

Type- K : Bulk head fitting (1 x 40 W GLS Lamp)

15 .



SUPPLY

TOTALSl. No.

UNIT RATE(in

Rs)8.1.0

-

1) SSB-1 Nos. U/R 385

2) SSB-2 Nos. U/R 510

3) SSB-3 Nos. U/R 590

4) SSB-4 Nos. U/R 720

5) SSB-5 Nos. U/R 790

8.2.0 -

1) FSB-3 Nos. U/R 590

2) FSB-4 Nos. 4 720 2,880

3) FSB-5 Nos. U/R 790

8.3.0 Lighting Panels -

8.3.1

-

1) Nos. 410500 42,000

2) Nos. 217850 35,700

-

9.0.0 EARTHING -

9.1.1 Earth Electrodes -

9.2.0 Nos. 30

1200 36,000

1 M 150 56 8,400

Supply of following types of surface mounted switchboards / boxes complete as per approved drawings, specifications of this tender and

Supply of following types of flush mounted switchboards/boxes as per approved drawings, specifications of this tender and direction and

Procurment,Installation, testing and commissioning of lighting transformer and lighting panels, including MLDB in dust tight (with hinged cover) sheet steel enclosure having Nos.CB/ELCB/Switch fuse units with complete wiring, all labour, materials as per approved drawings, specification of this tender and directions of Engineer-in-Charge. The Spec of Lighting transformer is given in Annexure I0

6 way (single phase) with 16 A SPN MCB and 63 A incoming 4-pole MCB & 30mA ELCB suitable for indoor installations.15 way (single phase) with 16A SPN MCB O/Gs and 63A incoming 4-pole MCB &30 mA ELCB I/C (suitable for indoor installations)

Supply of following GI earthing strip along cable trenches or cable trays or fixing to walls or structures or buried individually in paved/unpaved areas including welding at joints, providing anti-corrosive paint or bitumen clamping and necessary hardware for connecting, excluding excavation & refilling etc. including all labour and materials complete as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.

25 x 6 mm GI flat(LPs,DBs,motor 30KW to 90KW)

16 .



SUPPLY

TOTALSl. No.

UNIT RATE(in

Rs)2 25 x 3 mm GI flat M 40 28 1,120

3 M 80 112 8,960

4 50 x 10 mm GI flat M 150 190 28,500

5 M 1800 280 504,000

6 8 SWG (upto 7.5 KW) M 50 4 200

7 50 x 6 mm Cu flat kg 50 330 16,500

8 10 SWG (upto 30 KW) M 100 3 300

9.3.0 1)

-

1) Nos. 2 1800 3,600

2) Nos. 3 1800 5,400

9.4.0 Nos. 35140 4,900

9.5.0 Lightning Protection -

-

1) Test link box (150 x 150 x 100) Nos. 7 500 3,500 2) 50 x 6 mm GI flat M U / R 1123) Nos. 4 300 1,200

4) Nos. U / R 30

5) M 400 72 28,800

6) D.E. Electrode Nos. 7 1200 8,400

-

MISCELLANEOUS ITEMS -

-

1) 300 mm dia Nos. U/R 2100

2) 450 mm dia Nos. U/R 5560

3) 750 mm dia Nos. U/R 12000

Nos. U/R 5600

Nos. U/R 1700

Nos. U/R6100

Total 11,669,167

50 x 6 mm GI flat (HT motors, LT motors above 90KW)

75 x 10 mm GI flat(trays,switchgears,structures etc.)

Supply of 10 mm thick GI earth plate on steel/RCC structure / brick wall as per approved drawing specifications of this tender and direction of Engineer-in-charge.

12 way earth pad for instrument earthing (IEP)12 way earth pad for electrical earthing (EEP)Supply of 500 mm long 75 x 10 mm GI earth bus with 10 nos. holes suitable for 10 SWG wire.

Supply of following items for lightning protection system.

Vertical air termination (40 mm dia, 3 M long GS rod)Horizontal air termination (25 x 3 mm GI flat) 32 x 6mm GI flat (STG BLDG & CHIMNEY)

10.0.0

10.1.0

Supply of Crompton make following Single phase Exaust fans.

10.1.1

Supply of motor operated industrial siren of range 1 kilo meter

10.1.2

Supply of 300mm dia 240V,AC ceiling fan.

10.1.3

Supply of fire sealing compound for sealing of cut-outs arise due to cable entry points in floor/ wall etc.

17

ANNEXURE-I

Schedule of Quantities & Rates for Supply of Erection Material for Instrumentation Jobs of Kymore 25MW CPP Project

Sl. No. Part No. Description Size & Rating Material Qty. Unit Qty. Unit Total Price

23 SS Tubing ½" OD x 0.065" thk. SS 316 200 mtrs 200 Mtrs 95 19000(RB 72 - 75)

21 Male Connector ½" NPT (M) x SS 316 150 Nos. 150 Nos. 210 31500½" OD 3000 #

22 Union Tee ½" OD 3000 # SS 316 35 Nos. 35 Nos. 545 1907525 Globe Valve ½" NPT (F) 3000 # SS 316 25 Nos. 25 Nos. 2680 6700028 Tube Plug ½" OD 3000 # SS 316 30 Nos. 30 Nos. 210 63001 SMLS Nipple 6" Long ½" NPT (M) 3000 # ASTM A 105 130 Nos. 130 Nos. 250 325002 ½" NPT (F) 3000 # ASTM A 105 45 Nos. 45 Nos. 145 6525

4 Copper Tubing ¼" OD 250 mtrs 250 Mtrs 100 25000

5 Male Connector ¼" NPT (M) x Brass 65 Nos. 65 Nos. 22 1430¼" OD 3000 #

11 Inst. Support with Base 2" NB Sch 40 CS 40 Nos. 40 Nos. 800 32000

1.5 mtr. Long

30 ½" NPT (F) 3000 # ASTM A 105/ 13%Cr 55 Nos. 55 Nos. 295 16225

40 Pipe Union ½" NPT (F) 3000 # ASTM A 105 45 Nos. 45 Nos. 205 922542 Union ½" OD x ½” OD SS 316 20 Nos. 20 Nos. 260 5200

3000 # 51 Pipe ½" Sch. 80 ASTM A335 P11 110 mtrs 110 Mtrs 340 3740052 ½" SW 3000# ASTM 182 Gr. F11 15 Nos. 15 Nos. 790 1185053 Globe Valve ½" SW 1500# ASTM 182 Gr. F11 15 Nos. 15 Nos. 1100 1650054 Equal Tee ½" SW 3000# ASTM A 182 Gr. F11 15 Nos. 15 Nos. 1060 15900

55 Nipple ASTM A 335 Gr. P11 15 Nos. 15 Nos. 300 4500

56 Cap ½" NPT (F) ASTM A 182 Gr. F11 15 Nos. 15 Nos. 130 19503000#

57 Dilo Coupling ½" 3000# ASTM A 182 Gr. F11 30 Nos. 30 Nos. 100 3000

59 Adaptor ASTM A 182 Gr. F11 15 Nos. 15 Nos. 800 12000

60 Reducer ½" x ¾ SW 3000# ASTM A 182 Gr. F11 20 Nos. 20 Nos. 442 884061 Pipe ½" Sch. 80 ASTM A 106 Gr. B 60 mtrs 60 Mtrs 300 1800062 ½" SW 3000# ASTM A 105 15 Nos. 15 Nos. 95 142563 Globe Valve ½" SW 1500# ASTM A 105/13% Cr 10 Nos. 10 Nos. 2680 2680064 Equal Tee ½" SW 3000# ASTM 10 Nos. 10 Nos. 120 1200

A 10565 Nipple ½" SW / ½" NPT (M) ASTM A 106 Gr. B 10 Nos. 10 Nos. 300 3000

Sch. 8066 Cap ½" NPT (F) ASTM 15 Nos. 15 Nos. 35 525

3000# A 105 67 Dilo Coupling ½" 3000# ASTM 15 Nos. 15 Nos. 100 1500

A 105

69 Adaptor ASTM A 105 10 Nos. 10 Nos. 800 8000

70 Reducer ½" x ¾ SW 3000# ASTM A 105 15 Nos. 15 Nos. 60 900

225 Male Connector Brass 15 Nos. 15 Nos. 40 600

5 Male Connector ½” NPT (M) x ½” OD, Brass 45 Nos. 45 Nos. 45 2025

3 Cable Gland Nickel Plated Brass 175 Nos. 175 Nos. 100 17500

Cable Gland Nickel Plated Brass 125 Nos. 125 Nos. 120 15000

216 Cable Gland Nickel Plated Brass 375 Nos. 375Nos.

120 45000


215 Cable Gland Nickel Plated Brass 150 Nos. 150Nos.

180 27000

Unit Price

1.

2.

3. 4. 5. 6. 7. 900 Elbow

8. Copper + PVC Coated

9.

10.

11. Needle Valve with Vent / Drain Plug

12. 13.

14. 15. Elbow -900

16. 17.

18. ½" SW / ½" NPT (M) Sch. 80

19.

20.

21. ½" SW/½" NPT (M) 3000#

22. 23. 24. Elbow -900

25. 26.

27.

28.

29.

30. ½" SW/½" NPT (M) 3000#

31.

32. ½” NPT (M) x ¼” OD, 3000#

33.

34. ½" NPT (M) Double Compression type

35. ¾" NPT (M) Double Compression type

36. ¾" ET (M) with Check

Nut Double Compression type

37. 1" NPT (M) Double Compression type

38. 1" ET (M) with Check

Nut Double Compression type

18

Sl. No. Part No. Description Size & Rating Material Qty. Unit Qty. Unit Total PriceUnit Price


Cable Gland Nickel Plated Brass 85 Nos. 85Nos.

435 36975

Cable Gland Nickel Plated Brass 30 Nos 30 Nos. 435 13050

2" Sch 40 with GI 5 Nos. 5 Nos. 500 2500

6 nos. of outlets a. Perforated Trays 50 (W) x 25 (H) x GI 500 mtrs 500 Mtrs 115 57500

2 (T) mm b. “ 100 (W) x 25 (H) x GI 300 mtrs 300 Mtrs 175 52500

2 (T) mm

Structural Steel MS 2.0 tons 2 Tons 35000 70000

GI Flat 26 x 6 (T) mm GI 50 mtrs 50 Mtrs 60 3000 GI Wire 8 SWG GI 200 mtrs 200 Mtrs 5 1000

Steel 350 Nos. 350

Nos.

20 7000

48 Junction Box

a) 20 terminals Steel 15 Nos. 15Nos.

800 12000

b) 30 terminals Steel 5 Nos.5 Nos.

950 4750

c) 50 terminals Steel 10 Nos.10 Nos.

1400 14000

d) 60 terminals Steel 3 Nos.3 Nos.

1750 5250

49 6 Snubber ½” NPT (M) x F SS 316 11 Nos. 11 Nos. 550 6050

50 15 Air Filter Regulator ½” NPT (F) 10 Nos.10 Nos.

100 1500

Total 853170

39. 1¼" ET (M) Double Compression type

40. 1½" ET (M) with

Check Nut Double Compression type

41. 1½" NPT (M) Double Compression type

42. Air Manifold with ¼

Needle Valve & 1 No Drain valve.

43.

44. Angle / Channel / Plate etc.

45. 46.

47. Anchor fasteners (For Instrument stanchion support)

Suitable for mounting JBs & Instruments stanchion supports

Refer data sheet (Doc. No. 6454-CI-SPC-384-016, R1)




Al. Body Filter Element Sintered

Bronze

Page 19 of 41

ANNEXURE-IIIORDERED QTY ACTUL PAYMENT RECD BALANCE

ITEM DESCRIPTION QTY AMOUNT QTY AMOUNT QTY AMOUNT

1.0.0 EQUIPMENT1.1.0 Transformers1.1.1 Installation, testing and commissioning of …….

1) Nos. 3 15000 45000 3 45000 3 45000 0 02) No. 1 140000 140000 1 140000 1 140000 0 03 ) No. 1 17000 17000 1 17000 1 17000 0 0

4 ) Filtration of transformer oil … 0 0 0 0No. 1 70000 70000 1 70000 0 0 1 70000No. 3 5000 15000 3 15000 0 0 3 15000No. 1 7000 7000 1 7000 0 0 1 7000

L. T. Bus Duct 0 0 0 0

3 sets 3 110000 330000 3 330000 1 1100002

220000

H. T. Bus Duct 0 0 0 0

1 Set 1 110000 110000 2 220000 0 02

220000

1 Set 1 140000 140000 1 140000 0 01

140000

1.1.2 6.6 kV Switchgear 0 0 0 0

0 0 0 0

i) 6.6 kV Switchgear set 1 40000 40000 1 40000 0 0 1 40000

ii) No. 1 24000 240001

24000 0 01

24000

1.1.3 11 K V Switchgear 0 0 0 0

No. 1 64000 64000 1 64000 0 0 1 64000

i) 11 kV Switchgear set 1 80000 80000 1 80000 1 80000 0 0

0 0 0 0

II) No. 1 8000 8000 2 16000 1 8000 1 8000

NITSON AND AMITSU PRIVATE LIMITED

Fabrication,Erection, No-Load & Load Trialsof Electrical Equipment of Kymore 25MW CPP

Sl. No.

ORDERED QTY

UNIT RATE (in

Rs)

ORDERED AMOUNT

11 kV / 0.433kV, 2.0MVA Oil Type Aux. transformer 11kV / 6.6 kV, 31.5 MVA Oil Type Gen.transformer 11 KV/ 6.6 KV 2 MVA Station Auxiliary transformer

i) 31.5 MVA, 11 kV / 6.6 kV, Generator transformerii) 2.0 MVA,11kV / .433 kV Auxiliary transformersiii) 2.0 MVA, 11 KV/ 6.6 KV Station Auxiliary transformer

Installation of 415V, 3200 A non-phase segregated bus ducts from Aux.trf. to 415V PCC ( approx. 37 mtrs(total). including bends & straight runs)

I) Installation, testig and commissioning of 11 KV,2000 A, Phase segregated Bus duct from Turbo generator to 11 KV SWGR ( approx.28 metres ).

I) Installation, testig and commissioning of 6.6 KV,3000 A, Phase segregated Bus duct from Turbo generator to 6.6 KV SWGR at LC2 ( approx.35 metres ).

Installation, testing and commissioning of 6.6 kV switchgear .....................

6.6 K V Switchgear 3 cubicales of same size (W x H) as above in line with Existing switchgear at LC-2 make ABB

Installation, testing and commissioning of 11 kV switchgear …………………...

No. of panels in the Switchboard = 2 I/C & 8 Nos.outgoings,1 Nos.Bus PTs 1 No. Transformer PT

One 11 KV bkr panel adjacent to existing 11kv switchboard (on the LHS to the HTB) room L 800 x D 1750 x H 2450

Page 20 of 41





Sl. No.

ORDERED QTY

UNIT RATE (in

Rs)

ORDERED AMOUNT

III) No. 1 8000 8000 2 16000 0 0 2 16000

1.2.0 LT Switchgear and Panels 0 0 0 01.2.0 0 0 0 0

I) 415 PMCC (15000 (L) x 11034(W) x 2400 (H) mm) No. 1 85000 85000 1 85000 1 85000 0 0

II) 0 00

0

1) STG MCC (5687 L x 850 D x 2400H ) No. 1 30000 30000 1 30000 1 30000 0 0

2) No. 1 18000 18000 1 18000 0 0 1 18000

3) BOP MCC ( 3272 L x 850 D x 2400 H) No. 1 18000 18000 1 18000 0 0 1 180004) Emergency MCC (4882 x 850 x 2400) No. 1 27000 27000 1 27000 1 27000 0 05) VENT & AC MCC (1662 x 850 D x 2400) No. 1 9000 9000 1 9000 1 9000 0 06) MLDB (2500 x 300 x 2150) No. 1 12000 12000 1 12000 0 0 1 12000

7) No. 1 12000 12000 2 24000 1 12000 1 12000

8) STG AVR Panel (1150 x 1150 x 2300) No. 1 7000 7000 1 7000 0 0 1 7000

9) No. 1 8000 8000 1 8000 0 0 1 8000

10) Turbine Control Panel (1600 x 900 x 2325) No. 1 9000 9000 1 9000 0 0 1 900011) Fire detection panel (600 x 400 x 600) No. U/R 1500 0 1 1500 0 0 1 150012) Lighting panels (1000 x 400 x 1000 each) Nos. 2 1500 3000 4 6000 2 3000 2 300013) 6.6 kV NGRs ( 1180 x 700 x 1325) Nos. 2 6000 12000 3 18000 0 0 3 1800014) 110V DC DB (1000 x 500 x 2000 ) Nos. 1 4000 4000 2 8000 0 0 2 800016) No. 4 2000

8000

5

10000

0

0

5

10000

17) AC panel board (4000 x 600 x 2400) No. U/R 20000 0 1 20000 0 0 1 200001.3.0 Battery Sets 0 0 0 01.3.1 Installation, testing and commissioning of battery sets ……. 0 0 0 0

Battery Set - 1 (for plant DC system) set 1 16000 16000 1 16000 0 0 1 160001.4.0 Local Control Stations 0 0 0 01.4.1 0 0 0 0

One 11 KV bkr panel at LC-2 switchgear room L 800 x D 1750 x H 2450

Installation, testing and com-missioning of LT switchboards ……........................................

Motor Control Centres, Aux. DBS, Relay/Control Panels, UPS & Battery Charges Panels etc.(with approximate dimensions in mm)

Water Treatment Plant+ Raw water MCC (3272 L x 1000 D x 2400H)

110 V Battery Charger Panel (1000 x 850 x 2000) & DCDB (1200 x 400 x 2000)

STG Control, relay and Sync panel (1050 x 915 x 2312) & (900x915x2312)

24V AC DB which includes 240V/ 24V AC,500VA,control transformer with 1 no. 10A SPN MCB for Trf. I/C and 32A SPN MCB for Trf O/G and 4nos. 10A 24V AC socket outlet with MCB's.(for hand lights)

Installation, testing and commissioning of industrial type Local Control Stations (push button stations)……

Page 21 of 41





Sl. No.

ORDERED QTY

UNIT RATE (in

Rs)

ORDERED AMOUNT

1) 0 0 0 0

a) with 200 -- 1200A Nos 3 200 600 6 1200 0 0 6 1200b) with 125 -- 750A Nos 1 200 200 1 200 0 0 1 200c) with 20 -- 120 A Nos 5 200 1000 8 1600 0 0 8 1600d) with 30 -- 180A Nos 7 200 1400 10 2000 0 0 10 2000e) with 60 -- 360A Nos 5 200 1000 5 1000 5 1000 0 0f) with 250 -- 1500A Nos U/R 200 0 0 0 0 0 0 0g) with 75 -- 450A Nos U/R 200 0 0 0 0 0 0 0h) with 400 - 2400A Nos. 3 200 600 5 1000 0 0 5 10002) Nos. 15 200 3000 20 4000 0 0 20 4000

3) Nos. 10 300 3000 15 4500 0 0 15 4500

4) Mushroom type emergency stop PB without ammeter (Type-D) Nos. 5 200 1000 5 1000 0 0 5 1000

5) Nos. U/R500 0

00

00

00

6) Nos. U/R 500 0 0 0 0 0 0 0

7) Nos. 15 500 7500 20 10000 0 0 20 10000

1.5.0 Welding and Industrial Receptacles 0 0 0 01.5.1

0 00

0

1) Industrial type single phase 10 A sockets…... (RB-1). 8 300 2400 8 2400 0 0 8 24002) Industrial type single phase 16A sockets…..RB2 10 300 3000 10 3000 0 0 10 30003) Industrial type TP + E 63 A sockets with 63 A TP MCB (RC-1) 8 400 3200 8 3200 0 0 8 32004) U/R 400 0 0 0 0 0 0 0

5) 8 300 2400 8 2400 0 0 8 2400

6) 16A MCB with sheet steel enclosure 12 300 3600 12 3600 0 0 12 36007) 6 300 1800 6 1800 0 0 6 1800

1.6.0 Junction Boxes 0 0 0 0

Industrial weather proof Start & Stop (Stayput type) PBS with ammeter with canopy (Type A)

Industrial weatherproof start & stop (Stayput type) PBS without ammeter with canopy (Type B)Industrial type forward, reverse and stop (Stayput type) PBS without ammeter without canopy (Type C)

Industial weatherproof P.B.station with 1nos. forward P.B.,1nos reverse P.B……….. ( Type -E)

Industrial weatherproof start, stop (stay put type) and emergency stop PB with ammeter with canopy. (F- type)Industrial weatherproof start, stop (stay put type), raise, lower PB without ammeter with canopy.( G - type )

Installation, connection, testing and commissioning of industrial / weatherproof metal clad SPN / TP+E socket outlet ................

Industrial weather proof TP + E 63 A sockets with 63 A SPN MCB. (RC2)10A SP industrial switch in sheet steel enclosure (for lighting control)

Industrial type weather proof 16A socket with 16A SPN MCB (RB3)

Page 22 of 41





Sl. No.

ORDERED QTY

UNIT RATE (in

Rs)

ORDERED AMOUNT

Installation of following weather proof junction boxes .... 0 0 0 01) Type JB-1 with 30 Nos. control terminals for 1.5 sq.mm Cu. Nos. 4 300 1200 4 1200 0 0 4 12002) Type JB-2 with 45 Nos. Control terminals for 1.5 sq.mm, Cu. Nos. U/R 400 0 0 0 0 0 0 03) Type JB-3 with 50 Nos. Control terminals for 1.5sq.mm, Cu. Nos. 4 400 1600 4 1600 0 0 4 1600

4) Type JB-4 with 100 Nos. Control terminals for 1.5 sq.mm, Cu. Nos. U/R 800 0 0 0 0 0 0 0

5) Nos. 4 3001200

41200

00

41200

1.7.0 Canopies 0 0 0 01.7.1 Nos. U / R 22 0 0 0 0 0 0 0

1.8.0 Safety Equipment 0 0 0 0a) Installation of the following safety equipment, ……… 0 0 0 01) Shock hazard charts complete with frame and glass Nos. 8 100 800 8 800 0 0 8 8002) First aid boxes with requisite Medicines as per standards Nos. 6 100 600 6 600 0 0 6 600

3) Nos. 25 50 1250 25 1250 0 0 25 1250

4) Fire extinguishers of assorted types 0 0 0 0 0a) Fire sand Buckets with stand (4 Buckets in each Stand) Nos. 5 1200 6000 5 6000 0 0 5 6000b) Co2 type Nos. 10 100 1000 10 1000 0 0 10 1000c) Dry chemical powder Nos. 10 100 1000 10 1000 0 0 10 1000b) Laying of ISI marked 900 mm wide, rubber floor mats….. 0 0 0 0 01) For HT panels -20mm thick (6.6 kV Grade) M U/R 20 0 0 0 0 0 0 02) For HT panels -20mm thick (11 kV Grade) M 25 20 500 25 500 0 0 25 5003) For LT panels - 6 mm thick (1.1 kV Grade) M 50 20 1000 50 1000 0 0 50 1000

2.0.0 CABLES 0 0 0 0 02.1.0 Laying of cables 0 0 0 0 02.1.1 0 0 0 0 0

a HT Power Cable (6.6 kV (UE) grade, XLPE) 0 0 0 0 01 3C x 300 sq.mm Al, XLPE M 225 60 13500 40 2400 0 0 40 2400

2 M U/R 40 0 0 0 0 0 0 0

0 0 0 0 0

b HT Power cable Cu/Al 11 KV UE grade, XLPE 0 0 0 0 0

Type JB-5 with 16nos power terminals suitable for 1no 4C X 10 sq mm Al XLPE I/C cable and 3Nos 4C X 10 sq mm Al XLPE cables.

Fabrication & erection of canopies for miscellaneous outdoor equipment........

Caution boards as per IS:2251 including supply of necessary clamps, bolts and other hardware

Horizontal and vertical laying of cables of different voltage grade and types of the following sizes……………..

1C x 630 sq.mm Cu, XLPE (trefoil clamps are covered separately )Horizontal and vertical laying of cables of different voltage grade and types of the following sizes..........................

Page 23 of 41





Sl. No.

ORDERED QTY

UNIT RATE (in

Rs)

ORDERED AMOUNT

1 3C x 300 sq.mm Al, XLPE M 275 70 19250 240 16800 160 11200 80 5600

2 M 9500 50 475000 9000 450000 4765 238250 4235 211750

c LT Power Cables (1100 V XLPE Al/ Cu. Cables) 0 0 0 0 01 4 C x 25 sq.mm, Al. M 175 20 3500 0 0 0 0 0 02 4 C x 10 sq.mm, Al. M U/R 16 0 0 0 0 0 0 03 4 C x 16 sq.mm, Al M U/R 18 0 0 0 0 0 0 04 3 C x 400 sq.mm, Al. M 1500 55 82500 2400 132000 867 47685 1533 843155 3 C x 300 sq.mm, Al. M U/R 50 0 0 0 0 0 0 06 3 C x 240 sq.mm, Al. M 2000 40 80000 1300 52000 0 0 1300 520007 3 C x 150 sq.mm, Al. M 100 36 3600 0 0 0 0 0 08 3 C x 120 sq.mm, Al. M 500 32 16000 1150 36800 262 8384 888 284169 3 C x 185 sq.mm, Al. M U/R 38 0 0 0 0 0 0 0

10 3 C x 95 sq.mm, Al. M U/R 28 0 400 11200 0 0 400 1120011 3 C x 70 sq.mm, Al. M 925 26 24050 400 10400 0 0 400 1040012 3 C x 50 sq.mm, Al. M U/R 24 0 0 0 0 0 0 013 3 C x 35 sq.mm, Al. M 400 22 8800 400 8800 0 0 400 880014 3 C x 25 sq.mm, Al. M 225 18 4050 850 15300 0 0 850 1530015 3 C x 16 sq.mm, Al. M 1000 16 16000 1000 16000 0 0 1000 1600016 3 C x 10 sq.mm, Al. M 100 14 1400 0 0 0 0 0 017 3 C x 6 sq.mm, Cu. M 600 12 7200 700 8400 540 6480 160 192018 3 C x 4 sq.mm, Cu. M U/R 12 0 750 9000 0 0 750 900019 3 C x 2.5 sq.mm, Cu M 8200 10 82000 9000 90000 143 1430 8857 8857020 3.5C x 70 sq.mm, Al M 200 26 5200 0 0 0 0 0 021 3.5C x 35 sq. mm, Al M 350 22 7700 800 17600 440 9680 360 792022 4C x 4sq mm, Cu M 600 12 7200 600 7200 440 5280 160 192023 4C x 2.5sq mm, Cu M 950 12 11400 1000 12000 0 0 1000 1200024 4C x 35sq mm, Al M U/R 24 0 0 0 0 0 0 025 4C x 50sq mm, Al M U/R 26 0 0 0 0 0 0 026 3 1/2C x 95sq mm, Al M 100 28 2800 520 14560 0 0 520 1456027 4C x 120sq mm, Al M U/R 34 0 0 0 0 0 0 028 4C x 150 sq mm, Al M U/R 38 0 0 0 0 0 0 029 4C x 240 sq mm, Al M U/R 44 0 0 0 0 0 0 0d Control Cables (1100 V PVC Cu. Cables) 0 0 0 0 01 2 C x 2.5 sq.mm, Cu. M 3600 8 28800 4000 32000 2715 21720 1285 102802 2 C x 1.5 sq.mm, Cu. M 3000 8 24000 2000 16000 0 0 2000 160003 4 C x 1.5 sq.mm, Cu. M 5600 8 44800 4000 32000 1515 12120 2485 19880

1C x 630 sq.mm Cu, XLPE (trefoil clamps are covered separately )

Page 24 of 41





Sl. No.

ORDERED QTY

UNIT RATE (in

Rs)

ORDERED AMOUNT

4 7 C x 1.5 sq.mm, Cu. M 6800 10 68000 5000 50000 677 6770 4323 432305 10 C x 1.5 sq.mm, Cu. M 1000 12 12000 1000 12000 0 0 1000 120006 12C x 1.5 sq.mm, Cu. M 5200 14 72800 2000 28000 0 0 2000 280007 19C x 1.5 sq.mm Cu. M U/R 16 0 2500 40000 0 0 2500 400008 24C x 1.5 sq.mm,Cu. M U/R 17 0 0 0 0 0 0 09 27C x 1.5 sq.mm, Cu. M 1500 17 25500 1400 23800 1090 18530 310 5270

10 37C x 1.5 sq.mm, Cu. M U/R 20 0 0 0 0 0 0 011 4C x 2.5 sq mm, Cu M U/R 12 0 0 0 0 0 0 012 5C x 1.5 sq.mm, Cu M U/R 12 0 2000 24000 0 0 2000 2400013 7C x 2.5 sq.mm,Cu M U/R 12 0 0 0 0 0 0 0

2.2.0 End Terminations 0 0 0 0 02.2.1 0 0 0 0 0

a) LT Power Cables (XLPE Al/Cu) 0 0 0 0 01 4C x 25 sq.mm, Al. No. 35 90 3150 0 0 0 0 0 02 4C x 10 sq.mm, Al. Nos. U/R 65 0 0 0 0 0 0 03 4C x 16 sq.mm, Al Nos. U/R 80 0 0 0 0 0 0 04 3 C x 400 sq.mm, Al. Nos. 20 500 10000 36 18000 0 0 36 180005 3 C x 240 sq.mm, Al. Nos. 12 370 4440 6 2220 0 0 6 22206 3 C x 300 sq.mm, Al. Nos. U/R 450 0 0 0 0 0 0 07 3 C x 120 sq.mm, Al. No. U/R 180 0 38 6840 0 0 38 68408 3 C x 185 sq.mm, Al. No. U/R 240 0 0 0 0 0 0 09 3 C x 95 sq.mm, Al. No. 10 150 1500 8 1200 0 0 8 1200

10 3 C x 70 sq.mm, Al. No. 16 120 1920 10 1200 0 0 10 120011 3 C x 35 sq.mm, Al. No. 16 80 1280 16 1280 0 0 16 128012 3 C x 25 sq.mm, Al. No. 8 80 640 40 3200 0 0 40 320013 3 C x 16 sq.mm, Al. No. U/R 70 0 34 2380 0 0 34 238014 3 C x 10 sq.mm, Al. No. 4 65 260 0 0 0 0 0 015 2C x 50 sq.mm Al. No. U/R 80 0 0 0 0 0 0 016 3.5C x 35 sq.mm, Al. Nos. U/R 80 0 24 1920 0 0 24 192017 3C x 150 sq.mm, Al. Nos. U/R 200 0 0 0 0 0 0 018 3 C x 6 sq.mm, Cu. Nos. 14 50 700 14 700 0 0 14 70019 3 C x 16 sq.mm Al Nos. U/R 70 0 16 1120 0 0 16 112020 3 C x 4 sq.mm, Cu. Nos. U/R 50 0 30 1500 0 0 30 150021 3 C x 2.5 sq.mm, Cu Nos. 120 45 5400 600 27000 0 0 600 2700022 3 C x 185 sq.mm, Al. Nos. 16 240 3840 0 0 0 0 0 023 2C x 4 sq.mm Cu Nos. U/R 45 0 0 0 0 0 0 0

Termination of XLPE / PVC insulated armoured cables (upto 1100 V grade) ...................

Page 25 of 41





Sl. No.

ORDERED QTY

UNIT RATE (in

Rs)

ORDERED AMOUNT

24 2C x 6 sq.mm, Cu Nos. U/R 45 0 0 0 0 0 0 025 3.5C x 70 sq mm,Al Nos. U/R 120 0 0 0 0 0 0 026 4C x 35 sq mm Cu Nos. U/R 90 0 0 0 0 0 0 027 4C x4 sq mm Cu Nos. U/R 50 0 8 400 0 0 8 40028 4C x 2.5sq mm Cu Nos. U/R 50 0 16 800 0 0 16 80029 4C x 25sq mm Al Nos. 30 80 2400 0 0 0 0 0 030 4C x 50 sq mm Al Nos. U/R 100 0 0 0 0 0 0 031 4C x 120 sq mm Al Nos. 6 200 1200 0 0 0 0 0 0b Control Cables (PVC Cu.) 0 0 0 0 01 2 C x 2.5 sq.mm,Cu. Nos. 656 45 29520 350 15750 0 0 350 157502 2 C x 1.5 sq.mm Cu. Nos. 2300 45 103500 400 18000 0 0 400 180003 4 C x 1.5 sq.mm, Cu. Nos. 1400 50 70000 100 5000 0 0 100 50004 7 C x 1.5 sq.mm, Cu. Nos. 1800 70 126000 700 49000 0 0 700 490005 10 C x 1.5 sq.mm, Cu. Nos. 1100 120 132000 250 30000 0 0 250 300006 12C x 1.5 sq.mm, Cu. Nos. 2000 40 80000 600 24000 0 0 600 240007 19C x 1.5 sq.mm, Cu. Nos. U/R 180 0 400 72000 0 0 400 720008 24C x 1.5 sq.mm, Cu. Nos. U/R 240 0 0 0 0 0 0 09 27C x 1.5 sq.mm, Cu. Nos. 1500 280 420000 500 140000 0 0 500 140000

10 37C x 1.5 sq.mm, Cu. Nos. U/R 350 0 0 0 0 0 0 011 4C x 2.5 sq mm, Cu. Nos. U/R 50 0 20 1000 0 0 20 100012 10C x 2.5 sq.mm Cu Nos. U/R 120 0 50 6000 0 0 50 600013 5Cx 1.5 sq.mm Cu Nos. 104 60 6240 250 15000 0 0 250 15000

2.2.2 a) 0 0 0 0 06.6 kV Power Cables (XLPE) 0 0 0 0 0

1 3C x 300 sq.mm, XLPE, Al Nos. 10 1800 18000 6 10800 2 3600 4 72002 1C x630 sq.mm, XLPE, Al Nos. 2 1400 2800 4 5600 0 0 4 5600

2.2.3 a) 0 0 0 0 011 kV Power Cables (XLPE) 0 0 0 0 0

1 3C x 300 sq.mm Al, XLPE Nos. 8 2200 17600 8 17600 8 17600 0 0

2 Nos. 56 1600 89600 54 86400 0 0 54 86400

2.3.0 0 0 0 0 0

LT Power Cable (1100 V grade XLPE) 0 0 0 0 01) Cables upto 3 cores and from 10 to 25 sq.mm Nos. U/R 160 0 0 0 0 0 0 02) Cables upto 3cores and from 35 to 70 sq.mm Nos. U/R 240 0 0 0 0 0 0 03) Cables upto 3 cores and from 95 to 150 sq.mm Nos. U/R 400 0 0 0 0 0 0 0

Termination of 6.6 kV grade cables.....................

Termination of 11 kV grade cables...............

1C x 630 sq.mm Cu, XLPE (trefoil clamps are covered separately )Making straight through joints for LT Power Cables of the following sizes ……………..

Page 26 of 41





Sl. No.

ORDERED QTY

UNIT RATE (in

Rs)

ORDERED AMOUNT

4) Cables upto 3 cores and from 185 to 400 sq.mm Nos. U/R 750 0 2 1500 0 0 2 15002.3.1 0 0 0 0 0

1 3C x 300 sq.mm,XLPE, Al Nos. U/R 2400 0 0 0 0 0 0 0

0 0 0 0 0

2 Nos. 9 2600 23400 9 23400 0 0 9 23400

2.4.0 G.I. Pipes / Conduit 0 0 0 0 0a) Laying of follow-ing sizes of class B GI pipe……… 0 0 0 0 01) 19 mm NB M U/R 30 0 300 9000 0 0 300 90002) 40 mm NB M U/R 50 0 0 0 0 0 0 03) 65 mm NB M U/R 80 0 0 0 0 0 04) 100 mm NB M 40 120 4800 42 5040 0 0 42 50405) 150 mm NB M U/R 200 0 0 0 0 0 0 0

2.5.0 Structural Steel 0 0 0 0 02.5.1 Fabrication and erection of steel structural work………….. 0 0 0 0 0

1) ISMC 150 kg 5000 14 70000 2000 28000 0 0 2000 280002) ISMC 100/75 kg 6000 14 84000 34000 476000 10000 140000 24000 3360003) ISA 65 kg 7600 14 106400 18000 252000 12632 176848 5368 751524) ISA 50/40 kg 6000 14 84000 10000 140000 4470 62580 5530 77420

5) chequered plate kg 3000 18 54000 10000 180000 4500 81000 5500 990002.6.0 Cable Trays 0 0 0 0 02.6.1 0 0 0 0 0

1 150 mm wide (Ladder type) M 100 20 2000 300 6000 0 0 300 60002 300 mm wide(Ladder type) M 2400 25 60000 2000 50000 522.5 13062.5 1477.5 36937.53 450 mm wide (Ladder type) M 500 30 15000 450 13500 30 900 420 126004 600 mm wide (Ladder type) M 3200 40 128000 3300 132000 2650 106000 650 260005 750 mm wide(Ladder type) M U / R 50 0 0 0 0 0 0 06 150 mm wide(perforated type) M 35 20 700 1050 21000 194 3880 856 171207 300 mm wide(perforated type) M 700 25 17500 1800 45000 1175 29375 625 15625

B FRP TRAY 0 0 0 0 01 100MM PERFORATED FRP TRAY M 100 20 2000 20 400 0 0 20 4002 50MM PERFORATED FRP TRAY M 100 20 2000 20 400 0 0 20 4003 150MM PERFORATED FRP TRAY M 50 25 1250 20 500 0 0 20 5004 150MM LADDER TYPE FRP TRAY M 125 35 4375 0 0 0 0 0 0

6.6 kV straight through joints for 6.6 kV (UE) grade cables of the following sizes………………………………

11 kV straight through joints for 11 kV (UE) grade cables of the following sizes ………………………1C x 630 sq.mm Cu, XLPE (trefoil clamps are covered separately )

Erection of pre-fabricated ladder/perforated hot dip galvanised steel channel type cable trays...........................

Page 27 of 41





Sl. No.

ORDERED QTY

UNIT RATE (in

Rs)

ORDERED AMOUNT

5 600MMLADDER TYPE FRP TRAY M 395 30 11850 0 0 0 0 0 06 300MM LADDER TYPE FRP TRAY M 550 25 13750 0 0 0 0 0 0

2.6.2 Fabrication and erection of 1.6 mm GI sheet ……… Sq,M U/R 200 0 0 0 0 0 0 02.7.0 Cable Glands 0 0 0 0 02.7.1 0 0 0 0 0

2) 3C x 300 sq.mm Nos 10 50 500 10 500 0 0 10 5003) 1C x 630 sq.mm Nos 58 30 1740 58 1740 0 0 58 1740

2.7.2 0 0 0 0 0

1) 3 C x 300 sq.mm, Al Nos. 10 40 400 10 400 0 0 10 4002) 1C x 630 sq.mm, Cu Nos. 0 25 0 0 0 0 0 0 0

2.7.30 0 0

00

i) XLPE LT Power Cables (Single Compression Type) 0 0 0 0 01 4C x 25 sq.mm, Al. No. 18 30 540 0 0 0 0 02 4C x 10 sq.mm, Al. Nos. U/R 15 0 0 0 0 0 0 03 4C x 16 sq.mm, Al Nos. U/R 25 0 0 0 0 0 0 04 3 C x 400 sq.mm, Al. Nos. 20 150 3000 20 3000 0 0 20 30005 3 C x 300 sq.mm, Al. Nos. U/R 120 0 0 0 0 0 0 06 3 C x 120 sq.mm, Al. No. U/R 80 0 28 2240 0 0 28 22407 3 C x 185 sq.mm, Al. No. U/R 95 0 0 0 0 0 0 08 3 C x 95 sq.mm, Al. No. 4 50 200 8 400 0 0 8 4009 3 C x 70 sq.mm, Al. No. 8 60 480 8 480 0 0 8 480

10 3 C x 35 sq.mm, Al. No. 8 40 320 8 320 0 0 8 32011 3 C x 25 sq.mm, Al. No. 4 35 140 26 910 0 0 26 91012 3 C x 16 sq.mm, Al. No. U/R 25 0 18 450 0 0 18 45013 3 C x 10 sq.mm, Al. No. 2 15 30 0 0 0 0 0 014 2C x 50 sq.mm Al. No. U/R 40 0 0 0 0 0 0 015 3.5C x 35 sq.mm, Al. Nos. U/R 40 0 12 480 0 0 12 48016 3C x 150 sq.mm, Al. Nos. U/R 80 0 0 0 0 0 0 017 3 C x 6 sq.mm, Cu. Nos. 8 15 120 8 120 0 0 8 12018 3 C x 16 sq.mm Al Nos. U/R 25 0 8 200 0 0 8 20019 3 C x 4 sq.mm, Cu. Nos. U/R 15 0 16 240 0 0 16 24020 3 C x 2.5 sq.mm, Cu Nos. 120 15 1800 340 5100 0 0 340 510021 3 C x 185 sq.mm, Al. Nos. U/R 95 0 0 0 0 0 0 0

Installation of nickel-plated single compression type brass cable glands ……..................

Installation of nickel-plated single compression type brass cable glands ….......................

Installation of nickel-plated single compression type (for indoor equipment ends) and double compression type (for outdoor equipment & motor ends) brass cable glands ….

Page 28 of 41





Sl. No.

ORDERED QTY

UNIT RATE (in

Rs)

ORDERED AMOUNT

23 2C x 4 sq.mm Cu Nos. U/R 15 0 0 0 0 0 0 024 2C x 6 sq.mm, Cu Nos. U/R 15 0 0 0 0 0 0 027 3.5C x 70 sq mm,Al Nos. U/R 50 0 0 0 0 0 0 028 4C x 35 sq mm Cu Nos. U/R 40 0 0 0 0 0 0 029 4C x4 sq mm Cu Nos. U/R 15 0 8 120 0 0 8 12030 4C x 2.5sq mm Cu Nos. U/R 15 0 8 120 0 0 8 12031 4C x 25sq mm Al Nos. 15 40 600 0 0 0 0 0 032 4C x 50 sq mm Al Nos. U/R 60 0 0 0 0 0 0 033 4C x 120 sq mm Al Nos. 3 95 285 0 0 0 0 0 0ii) Control Cables (Single Compression Type) 0 0 0 0 01 2 C x 2.5 sq.mm,Cu. Nos. 50 15 750 100 1500 0 0 100 15002 2 C x 1.5 sq.mm Cu. Nos. U/R 15 0 50 750 0 0 50 7503 4 C x 1.5 sq.mm, Cu. Nos. U/R 15 0 50 750 0 0 50 7504 7 C x 1.5 sq.mm, Cu. Nos. 100 20 2000 125 2500 0 0 125 25005 10 C x 1.5 sq.mm, Cu. Nos. U/R 25 0 10 250 0 0 10 2506 12C x 1.5 sq.mm, Cu. Nos. U/R 25 0 20 500 0 0 20 5007 19C x 1.5 sq.mm, Cu. Nos. U/R 40 0 20 800 0 0 20 8008 24C x 1.5 sq.mm, Cu. Nos. U/R 60 0 0 0 0 0 0 09 27C x 1.5 sq.mm, Cu. Nos. U/R 80 0 16 1280 0 0 16 1280

10 37C x 1.5 sq.mm, Cu. Nos. U/R 110 0 0 0 0 0 0 011 4C x 2.5 sq mm, Cu. Nos. U/R 15 0 10 150 0 0 10 15012 10C x 2.5 sq.mm Cu Nos. 50 25 1250 20 500 0 0 20 50013 5Cx 1.5 sq.mm Cu Nos. 52 15 780 100 1500 0 0 100 1500iii) XLPE LT Power Cables (Double Compression Type) 0 0 0 0 01 4C x 25 sq.mm, Al. No. 18 45 810 0 0 0 0 0 02 4C x 10 sq.mm, Al. Nos. U/R 25 0 0 0 0 0 0 03 4C x 16 sq.mm, Al Nos. U/R 35 0 0 0 0 0 0 04 3 C x 400 sq.mm, Al. Nos. 20 160 3200 20 3200 0 0 20 32005 3 C x 300 sq.mm, Al. Nos. U/R 130 0 0 0 0 0 0 06 3 C x 120 sq.mm, Al. No. U/R 90 0 20 1800 0 0 20 18007 3 C x 185 sq.mm, Al. No. U/R 105 0 0 0 0 0 0 08 3 C x 95 sq.mm, Al. No. 4 75 300 4 300 0 0 4 3009 3 C x 70 sq.mm, Al. No. 8 70 560 8 560 0 0 8 560

10 3 C x 35 sq.mm, Al. No. 8 45 360 8 360 0 0 8 36011 3 C x 25 sq.mm, Al. No. 4 40 160 20 800 0 0 20 80012 3 C x 16 sq.mm, Al. No. U/R 30 0 18 540 0 0 18 54013 3 C x 10 sq.mm, Al. No. 2 20 40 0 0 0 0 0 0

Page 29 of 41





Sl. No.

ORDERED QTY

UNIT RATE (in

Rs)

ORDERED AMOUNT

14 2C x 50 sq.mm Al. No. U/R 60 0 0 0 0 0 0 015 3.5C x 35 sq.mm, Al. Nos. U/R 60 0 12 720 0 0 12 72016 3C x 150 sq.mm, Al. Nos. U/R 90 0 0 0 0 0 0 017 3 C x 6 sq.mm, Cu. Nos. 8 15 120 8 120 0 0 8 12018 3 C x 16 sq.mm Al Nos. U/R 30 0 8 240 0 0 8 24019 3 C x 4 sq.mm, Cu. Nos. U/R 15 0 16 240 0 0 16 24020 3 C x 2.5 sq.mm, Cu Nos. 60 15 900 300 4500 0 0 300 450021 3 C x 185 sq.mm, Al. Nos. U/R 105 0 0 0 0 0 0 023 2C x 4 sq.mm Cu Nos. U/R 15 0 0 0 0 0 0 024 2C x 6 sq.mm, Cu Nos. U/R 15 0 0 0 0 0 0 027 3.5C x 70 sq mm,Al Nos. U/R 70 0 0 0 0 0 0 028 4C x 35 sq mm Cu Nos. U/R 45 0 0 0 0 0 0 029 4C x4 sq mm Cu Nos. U/R 15 0 8 120 0 0 8 12030 4C x 2.5sq mm Cu Nos. U/R 15 0 8 120 0 0 8 12031 4C x 25sq mm Al Nos. 15 45 675 0 0 0 0 0 032 4C x 50 sq mm Al Nos. U/R 60 0 0 0 0 0 0 033 4C x 120 sq mm Al Nos. 3 95 285 0 0 0 0 0 0iv) Control Cables (Double Compression Type) 0 0 0 0 01 2 C x 2.5 sq.mm,Cu. Nos. 100 15 1500 100 1500 0 0 100 15002 2 C x 1.5 sq.mm Cu. Nos. U/R 15 0 50 750 0 0 50 7503 4 C x 1.5 sq.mm, Cu. Nos. U/R 15 0 50 750 0 0 50 7504 7 C x 1.5 sq.mm, Cu. Nos. 150 20 3000 100 2000 0 0 100 20005 10 C x 1.5 sq.mm, Cu. Nos. U/R 25 0 10 250 0 0 10 2506 12C x 1.5 sq.mm, Cu. Nos. U/R 25 0 20 500 0 0 20 5007 19C x 1.5 sq.mm, Cu. Nos. U/R 45 0 20 900 0 0 20 9008 24C x 1.5 sq.mm, Cu. Nos. U/R 65 0 0 0 0 0 0 09 27C x 1.5 sq.mm, Cu. Nos. U/R 90 0 16 1440 0 0 16 1440

10 37C x 1.5 sq.mm, Cu. Nos. U/R 120 0 0 0 0 0 0 011 4C x 2.5 sq mm, Cu. Nos. U/R 15 0 10 150 0 0 10 15012 10C x 2.5 sq.mm Cu Nos. U/R 25 0 20 500 0 0 20 50013 5Cx 1.5 sq.mm Cu Nos. 52 20 1040 100 2000 0 0 100 2000

2.8.0 Cable Lugs 0 0 0 0 02.8.1 0 0 0 0 0

I) Power Cable Lugs 0 0 0 0 01 2.5 sq.mm, Cu. Nos. 600 2 1200 1232 2464 0 0 1232 24642 4 sq.mm, Cu. Nos. U/R 2 0 160 320 0 0 160 3203 6 sq.mm, Cu. Nos. U/R 2 0 56 112 0 0 56 112

Page 30 of 41





Sl. No.

ORDERED QTY

UNIT RATE (in

Rs)

ORDERED AMOUNT

4 10 sq.mm, Cu. Nos. U/R 3 0 0 0 0 0 0 05 16 Sq.mm, Cu. Nos. 20 4 80 300 1200 0 0 300 12006 35 Sq.mm, Cu. Nos. U/R 6 0 194 1164 0 0 194 11647 16 sq.mm, Al. Nos. U/R 4 0 0 0 0 0 0 08 25 sq.mm, Al. Nos. 150 5 750 240 1200 0 0 240 12009 35 Sq.mm, Al. Nos. U/R 6 0 0 0 0 0 0 0

10 50 Sq.mm, Al. Nos. U/R 8 0 0 0 0 0 0 011 70 Sq.mm, Al. Nos. 10 8 80 30 240 0 0 30 24012 95 sq.mm, Al. Nos. U/R 10 0 90 900 0 0 90 90013 120 Sq.mm, Al. Nos. 24 10 240 120 1200 0 0 120 120014 150 Sq.mm, Al. Nos U/R 12 0 0 0 0 0 0 014 185 sq.mm, Al. Nos. U/R 15 0 0 0 0 0 0 015 240 sq.mm, Al. Nos. U/R 15 0 0 0 0 0 0 016 300 sq.mm, Al. Nos. 6 20 120 18 360 0 0 18 36017 400 sq.mm, Al. Nos. 10 25 250 110 2750 0 0 110 2750II) Control Cables 0 0 0 0 01 2.5 sq.mm Cu. Nos. 4000 2 8000 4000 8000 0 0 4000 80002 1.5 sq.mm Cu Nos. 6000 2 12000 6000 12000 0 0 6000 12000

2.9.0 Cable Markers / Clamps 0 0 0 0 02.10.0 Trefoil Cable Clamps 0 0 0 0 02.10.1 M 3900 20 78000 2900 58000 0 0 2900 58000

3.0.0 LIGHTING 0 0 0 0 03.1.0 Lighting Poles 0 0 0 0 03.1.1 Erection of street lighting poles / flood lighting towers........ 0 0 0 0 0

1 3 M high lighting pole with JB (Type P-4) Nos. 12 1500 18000 32 48000 0 0 32 480002 2.2 M high lighting pole (Type W-1) Nos. 10 1500 15000 10 15000 0 0 10 150003 2.2 M high lighting pole (Type P-1) Nos. 13 1500 19500 13 19500 0 0 13 19500

3.2.0 Lighting Fixtures 0 0 0 0 03.2.1 Installation of following lighting fixtures ................... 0 0 0 0 0

1 Type-A1:Lighting with TH 1 x 40W Fluorescent Nos. 10 150 1500 10 1500 0 0 10 15002 Type-A2 : Lighting Fixture with 2 x 40 W fluorescent Lamp Nos. 145 150 21750 80 12000 18 2700 62 93003 Nos. U/R

150 00

00

00

0

4 Nos. U/R 150 0 0 0 0 0 0 0

Installation of cable binder (FRP) for 11kV, 1C x 630sq.mm Al, armoured cable approximately at every 1 m.

Type-A3 : Lighting Fixture 4 x 20 W Fluorescent tube light, decorative type recess mounted for false ceiling (for Control room)Type-B1 : Lighting Fixture with 1 x 40W Fluorescent Lamp decorating type.

Page 31 of 41





Sl. No.

ORDERED QTY

UNIT RATE (in

Rs)

ORDERED AMOUNT

5 Nos. 60 150 9000 40 6000 0 0 40 6000

6 Type-C1: Industrial High Bay Fixture 1 x 250 W HPSV Nos. 12 350 4200 40 14000 12 4200 28 98007 Type-C2: Industrial High Bay Fixture 1 x 250 W HPMV Nos. U/R 350 0 0 0 0 0 0 09 Type-D1 : Industrial medium bay Fixture 1 x 150 W HPSV Nos. U/R 350 0 0 0 0 0 0 0

10 Type-D2 : Industrial medium bay Fixture 1 x 250 W HPMV Nos. 25 300 7500 15 4500 0 0 15 450011 Type-E : Industrial Low bay Fixture ( 1 x 125W) HPMV Nos. 10 250 2500 10 2500 0 0 10 250012 Nos. 90 150 13500 140 21000 85 12750 55 8250

13 Nos. 10 300 3000 30 9000 0 0 30 9000

14 Type-EL: Battery back-up ( 2 x 20W) Nos. 15 150 2250 15 2250 0 0 15 225015 Type- K : Bulk head fitting (1 x 40 W GLS Lamp) Nos. 6 80 480 6 480 0 0 6 480

3.3.0 Switchboards / Boxes 0 0 0 0 03.3.1 0 0 0 0 0

1) SSB-1 U/R 100 0 0 0 0 0 0 02) SSB-2 Nos. U/R 100 0 0 0 0 0 0 03) SSB-3 Nos. U/R 100 0 0 0 0 0 0 04) SSB-4 Nos. U/R 100 0 0 0 0 0 0 05) SSB-5 Nos. U/R 100 0 0 0 0 0 0 0

3.3.2 0 0 0 0 0

1) FSB-3 Nos. U/R 100 0 0 0 0 0 0 02) FSB-4 Nos. 4 100 400 4 400 0 0 4 4003) FSB-5 Nos. U/R 100 0 0 0 0 0 0 0

3.4.0 Lighting Panels 0 0 0 0 03.4.1 0 0 0 0 0

1) Nos. 41200 4800

89600

00

89600

2) Nos. 21200 2400

22400

00

22400

3.5.0 Laying of Lighting Cables 0 0 0 0 0

Type-B2 : Lighting Fixture with 1 x 40W Fluorescent Lamp decorating type.

Type-M: Industrial Integral wellglass fixture (HPSV / HPMV Lamp)Type-H1: Street Lighting Fixture / Building periphery Lighting Fixture ( 1 x 70) HPSV

Installation of following types of surface mounted switchboards /………………….

Installation of following types of flush mounted switchboards/………………..

Procurment,Installation, testing and commissioning of...............and directions of Engineer-in-Charge……………….6 way (single phase) with 16 A SPN MCB and 63 A incoming 4-pole MCB & 30mA ELCB suitable for indoor installations.

15 way (single phase) with 16A SPN MCB O/Gs and 63A incoming 4-pole MCB &30 mA ELCB I/C (suitable for indoor installations)

Page 32 of 41





Sl. No.

ORDERED QTY

UNIT RATE (in

Rs)

ORDERED AMOUNT

3.5.1 Horizontal/vertical laying of lighting cables .............................. 0 0 0 0 0

a) On Trays : 0 0 0 0 01) 3½C x 35 sq.mm, Al M 350 22 7700 0 0 0 0 0 02) 4 C x 25 sq.mm, Al M U/R 22 0 0 0 0 0 0 03) 3 C x 2.5 sq.mm, Cu. M U/R 8 0 2500 20000 1100 8800 1400 112004) 4 C x 16 sq.mm, Al M U/R 20 0 0 0 0 0 0 05) 3C x 1.5 sq.mm, Al M U/R 8 0 0 0 0 0 0 06) 3½C x 70 sq.mm, Al M 200 28 5600 0 0 0 0 0 0

0 0 0 0 0b) On Wall /Ceiling/Structure: 0 0 0 0 01) 3½C x 35 sq.mm, Al M U/R 26 0 0 0 0 0 0 02) 4 C x 25 sq.mm, Al M U/R 26 0 0 0 0 0 0 03) 4 C x 16 sq.mm Al M U/R 24 0 0 0 0 0 0 04) 3 C x 2.5 sq.mm, Cu. M 3000 12 36000 0 0 0 0 0 05) 3½C x 70 sq.mm, Al M U/R 32 0 0 0 0 0 0 0c) Buried : 0 0 0 0 01) 3½C x 35 sq.mm, Al M U/R 18 0 0 0 0 0 0 02) 4 C x 25 sq.mm, Al M U/R 18 0 0 0 0 0 0 03) 4 C x 16 sq.mm Al M U/R 16 0 0 0 0 0 0 04) 3 C x 2.5 sq.mm, Cu. M U/R 8 0 0 0 0 0 0 05) 4C x 10sq mm Al M 1200 12 14400 0 0 0 0 0 06) 3½C x 70 sq.mm, Al M U/R 24 0 0 0 0 0 0 0

4.0.0 MOTORS 0 0 0 0 0 Testing & Commissioning of motors…. 0 0 0 0 0

4.1.1 LT motors (415 V) 0 0 0 0 01) 0 - 5.5 kW U/R 400 0 45 18000 0 0 45 180002) 5.6 - 15 kW U/R 600 0 0 0 0 0 0 03) 15.1 - 30 kW U/R 900 0 4 3600 0 0 4 36004) 30.1 - 45 kW 5 1200 6000 6 7200 0 0 6 72005) 45.1 - 75 kW U/R 2000 0 0 0 0 0 0 06) 75.1 - 110 kW U/R 2600 0 6 15600 0 0 6 156007) 110.1 - 160 kW Nos. U/R 3500 0 0 0 0 0 0 08) 160.1 - 270 kW 3 4000 12000 3 12000 0 0 3 12000

4.1.3 HT motors (6.6 kV) 0 0 0 0 01) 300 kW 2 9000 18000 3 27000 0 0 3 27000

5.0.0 EARTHING 0 0 0 0 0

Nos. Nos. Nos. Nos. Nos. Nos.

Nos.

Nos.

Page 33 of 41





Sl. No.

ORDERED QTY

UNIT RATE (in

Rs)

ORDERED AMOUNT

5.1.0 Earth Electrodes Nos. 30 2500 75000 36 90000 0 0 36 900005.1.1 Installation of following GI earthing strip.......... 0 0 0 0 0

1 25 x 6 mm GI flat(LPs,DBs,motor 30KW to 90KW) M 150 20 3000 150 3000 0 0 150 30002 25 x 3 mm GI flat M 40 15 600 40 600 0 0 40 6003 50 x 6 mm GI flat (HT motors, LT motors above 90KW) M 80 25 2000 80 2000 0 0 80 20004 50 x 10 mm GI flat M 150 30 4500 150 4500 0 0 150 45005 75 x 10 mm GI flat(trays,switchgears,structures etc.) M 1800 35 63000 3800 133000 1419 49665 2381 833356 8 SWG (upto 7.5 KW) M 50 4 200 50 200 0 0 50 2007 50 x 6 mm Cu flat kg 50 35 1750 0 0 0 0 0 08 10 SWG (upto 30 KW) M 100 4 400 100 400 0 0 100 400

5.1.2 1)

0 0 0

0

0

1) 12 way earth pad for instrument earthing (IEP) Nos. 2 200 400 2 400 0 0 2 4002) 12 way earth pad for electrical earthing (EEP) Nos. 3 200 600 3 600 0 0 3 600

5.1.3 Nos. 35 200 7000 35 7000 0 0 35 7000

5.2.0 Lightning Protection 0 0 0 0 0Supply of following items for lightning protection system. 0 0 0 0 0

1) Test link box (150 x 150 x 100) Nos. 7 150 1050 7 1050 0 0 7 10502) 50 x 6 mm GI flat M U / R 25 0 0 0 0 0 0 03) Vertical air termination (40 mm dia, 3 M long GS rod) Nos. 4 350 1400 4 1400 0 0 4 14004) Horizontal air termination (25 x 3 mm GI flat) Nos. U / R 20 0 0 0 0 0 0 05) 32 x 6mm GI flat (STG BLDG) M 400 22 8800 400 8800 0 0 400 88006) D.E. Electrode Nos. 7 1500 10500 7 10500 0 0 7 10500

6.0.0 CIVIL WORKS 0 0 0 0 06.1.0 Excavation and Back Filling 0 0 0 0 06.1.1. Cu.M U/R 220 0 150 33000 0 0 150 33000

6.2.0 Spreading of Sand 0 0 0 0 06.2.1 Cu.M U/R 100 0 0 0 0 0 0 0

6.3.0 Laying of Bricks 0 0 0 0 06.3.1 U/R

20 00

00

00

0

Installation and connecting of 10 mm thick GI earth plate on steel/RCC structure / brick wall as per approved drawing specifications of this tender and direction of Engineer-in-charge.

Installation of 500 mm long 75 x 10 mm GI earth bus with 10 nos. holes suitable for 10 SWG wire.

Excavation and back filling of trenches ........................... & directions of Engineer-in-Charge

Spreading of approved fine river sand in cable trenches ……………. and direction of Engineer-in-Charge

Spreading of approved second class brick ........................... and directions of Engineer-in-Charge ……………

M 2

Page 34 of 41





Sl. No.

ORDERED QTY

UNIT RATE (in

Rs)

ORDERED AMOUNT

6.4.0 RCC Hume Pipes 0 0 0 0 06.4.1 0 0 0 0 0

1) 150 mm dia Nos. U/R 200 0 0 0 0 0 0 02) 300 mm dia Nos. U/R 350 0 0 0 0 0 0 0

7.0.0 MISCELLANEOUS ITEMS 0 0 0 0 07.1.0

0 0 00

0

1) 300 mm dia Nos. Nil 300 0 0 0 0 0 0 02) 450 mm dia Nos. Nil 450 0 0 0 0 0 0 0

7.2.0 Nos. U/R 1200 0 0 0 0 0 0 0

7.3.0 Installation of single phase 240V AC ceiling fan. Nos. U/R 150 0 0 0 0 0 0 07.4.0 sq.m U/R 500 0 0 0 0 0 0 0

7.5.0 Supply of labour rates -- 0 0 0 01 Sr.Engineer Day U/R 1500 0 0 0 0 0 02 Jr.Engineer/Supervisor Day U/R 950 0 0 0 0 0 03 Electrician Day U/R 380 0 150 57000 0 0 150 570004 Asst. Electrian Day U/R 250 0 200 50000 0 0 200 500005 Fitter Day U/R 380 0 0 0 0 0 0 06 Welder Day U/R 450 0 0 0 0 0 0 07 Gas Cutter Day U/R 450 0 0 0 0 0 0 08 Grinder Day U/R 380 0 0 0 0 0 0 09 Painter Day U/R 320 0 0 0 0 0 0 0

10 Rigger Day U/R 380 0 0 0 0 0 0 011 Cable Jointer Day U/R 550 0 0 0 0 0 0 012 Helper Day U/R 210 0 0 0 0 0 0 0

7.6.0 -- 1 200000 200000 1 200000 0 0 1 200000

7.7.0 Installation of anchor fastners 0 0 0 01) M 6 x 50 mm Nos. 1000 10 10000 0 0 0 0 0 02) M 8 x 50 mm Nos. U/R 10 0 500 5000 0 0 500 50003) M 10 x 75 mm Nos. U/R 12 0 0 0 0 0 0 04) M 12 x 100 mm Nos. U/R 15 0 1000 15000 0 0 1000 15000

NEW ITEMS 0 0 0 0 0

Laying of RCC hume pipes ……………….. and directions of Engineer-in-Charge.

Installation of Crompton make following Single phase exhaust fans……………….. and direction of Engineer-in-Charge

Installation of motor operated industrial siren of range 1 kilo meter

Installation of fire sealing compound for sealing the cut-outs arise due to cable entry in floor/wall.

Service charges for electrical inspectorate approval for all electrical installation and drawings

Page 35 of 41





Sl. No.

ORDERED QTY

UNIT RATE (in

Rs)

ORDERED AMOUNT

1 CABLE LAYING-3CX240 SQ MM 11 KV XLPE M 0 50 0 1100 55000 0 0 1100 550002 END TERMINATION- 3CX240 SQ MM 11 KV XLPE NOS 0 1800 0 14 25200 0 0 14 252003 STRAIGHT THROUGH JOINT-3CX240 SQ MM XLPE NOS 0 2600 0 2 5200 0 0 2 52004 INSTALLATION OF UPS DB NOS 0 1200 0 4 4800 0 0 4 48005 INSTALLATION OF 50 KVA LIGHTING TRANSFOEMER NOS 0 2000 0 4 8000 0 0 4 80006 100X100XD50 MM JB INSTALLATION NOS 0 100 0 300 30000 0 0 300 300007 0

350000 03

10500000

03

1050000

8 MODIFICATION OF 11 KV BUS DUCT SET 0 60000 0 1 60000 0 0 1 600009 INSTALLATION OF LA PT PANEL 11 KV NO 0 9000 0 1 9000 0 0 1 9000

10 DC STARTER PANEL NO 0 4000 0 1 4000 0 0 1 4000Total 7015210 1667490 5347721

ANNEXURE-IA1 Pressure Gauge Nos. 43 600 25800 70 42000 0 0 70 42000

Pressure Transmitter Nos. 12 2050 24600 22 45100 0 0 22 45100Pressure Switch Nos. 10 850 8500 18 15300 0 0 18 15300Diff. Pressure Indicator Nos. 1 1000 1000 6 6000 0 0 6 6000Diff. Pressure Switch Nos. 2 850 1700 8 6800 0 0 8 6800I/P Converter Nos. 11 600 6600 15 9000 0 0 15 9000Temperature Gauge Nos. 38 600 22800 50 30000 0 0 50 30000Temperature Elements Nos. 12 800 9600 18 14400 0 0 18 14400Temperature Switch Nos. 1 750 750 2 1500 0 0 2 1500Level Gauge Nos. 8 700 5600 8 5600 0 0 8 5600Displacer type Level Transmitter Nos. 1 1200 1200 8 9600 0 0 8 9600Level Switch – Top mounted & side mounted Nos. 20 1750 35000 28 49000 0 0 28 49000DP type Flow Transmitter Nos. 2 1200 2400 2 2400 0 0 2 2400Flow nozzle Nos. 1 800 800 1 800 0 0 1 800Orifice assembly Nos. 1 500 500 0 0 0 0 0 0Speed Probe Nos. 2 800 1600 2 1600 0 0 2 1600Vibration Probes with JB’s Nos. 5 950 4750 5 4750 0 0 5 4750Axial Displacement Probes with JB’s Nos. 2 1050 2100 2 2100 0 0 2 2100Radial Shaft Vibration Probes with JB’s Nos. 14 1050 14700 14 14700 0 0 14 14700Bearing Metal Temperature Probes Nos. 14 950 13300 14 13300 0 0 14 13300

PER MONTH RATE AFTER GRACE PERID KEEPING BASIC INFRA STRUCTURE WITH TOOLS AND TACKLES

PER MONTH

2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20.

Page 36 of 41





Sl. No.

ORDERED QTY

UNIT RATE (in

Rs)

ORDERED AMOUNT

Casing Expansion Probe with JB’s Nos. 1 1050 1050 1 1050 0 0 1 1050Proximitor with JB’s Nos. 60 900 54000 60 54000 0 0 60 54000Control Valves Nos. 9 1200 10800 15 18000 0 0 15 18000PRDS Nos. 1 1200 1200 2 2400 0 0 2 2400On / Off Valves Nos. 1 900 900 2 1800 0 0 2 1800Safety Valve Nos. 1 1200 1200 0 0 0 0 0 0Turbine Control Panel Nos. 1 9000 9000 1 9000 0 0 1 9000Control panel for Digital Automatic Voltage Regulator Panel Nos. 1 8000 8000 1 8000 0 0 1 800025MW, 11KV, STG Control & Synchronizing Panel (Simplex) Nos. 1 12000 12000 1 12000 0 0 1 1200025MW, 11KV, STG Relay Panel (Simplex – Swing Type) Nos. 1 22500 22500 1 22500 0 0 1 22500Junction box Nos. 45 150 6750 45 6750 0 0 45 6750Air pot Nos. 10 200 2000 10 2000 0 0 10 2000Air Filter Regulator Nos. 15 800 12000 20 16000 0 0 20 16000

44 Impulse Tubing Nos. 1000 30 30000 250 7500 0 0 250 750045 Impulse Piping Nos. 600 40 24000 200 8000 0 0 200 800046 Pneumatic Tubing Nos. 300 30 9000 200 6000 0 0 200 600047 Structural Steel Ton 4 14000 56000 6 84000 0 0 6 84000

TOTAL 443700 532950 0 0 0 0ANNEXURE-IB 0 0

I/P converter Nos 6 600 3600 8 4800 0 0 8 4800Safety Relief Valve Nos 1 1200 1200 0 0 0 0 0 0Vibration Monitoring System Nos 8 950 7600 8 7600 0 0 8 7600Target type level indicators Nos 1 1200 1200 2 2400 0 0 2 2400Target type level switch (top & side mounted) Nos 3 1750 5250 6 10500 0 0 6 10500Differential pressure type level transmitter Nos 1 1200 1200 2 2400 0 0 2 2400Displacer type level transmitter Nos 1 1200 1200 2 2400 0 0 2 2400Displacer type level switch top & side mounted Nos 9 1000 9000 9 9000 0 0 9 9000Pressure gauges Nos 22 600 13200 34 20400 0 0 34 20400Pressure transmitters with 3 Way Manifolds Nos 7 2100 14700 10 21000 0 0 10 21000Pressure switches Nos 11 850 9350 15 12750 0 0 15 12750Temperature gauges capillary type Nos 10 600 6000 15 9000 0 0 15 9000Temperature element (RTD) Nos 11 800 8800 15 12000 0 0 15 12000Temperature element (Thermocouple) Nos 4 850 3400 10 8500 0 0 10 8500Thermo well Nos 2 250 500 30 7500 0 0 30 7500Level gauges Nos 2 700 1400 2 1400 0 0 2 1400Control valves Nos 2 1200 2400 2 2400 0 0 2 2400On-Off Valves Nos 1 900 900 1 900 0 0 1 900

21. 22. 23. 24. 25. 26. 27. 28. 29. 30. 31. 32. 33.

1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18.

Page 37 of 41





Sl. No.

ORDERED QTY

UNIT RATE (in

Rs)

ORDERED AMOUNT

Ultrasonic Level Transmitter Nos 1 4500 4500 1 4500 0 0 1 4500Safety / Relief Valves Nos 1 1200 1200 1 1200 0 0 1 1200Junction box (20T, 30T, 50T & 60T) Nos 21 200 4200 25 5000 0 0 25 5000

Nos 6 7000 42000 7 49000 0 0 7 49000Nos 2 2500 5000 2 5000 0 0 2 5000

DOT matrix printer Nos 1 300 300 1 300 0 0 1 300Color desk jet type printer Nos 1 300 300 1 300 0 0 1 300Printer table Nos 2 500 1000 2 1000 0 0 2 1000Cbling Nos 0 0 0

29.1 Anoalog Nos 0 0 0Nos 1000 8 8000 2500 20000 0 0 2500 20000Nos 2500 10 25000 2500 25000 0 0 2500 25000Nos 2000 14 28000 3000 42000 0 0 3000 42000Nos 1500 15 22500 4000 60000 0 0 4000 60000

29.2 RTD Cables Nos 0 0Nos 2000 8 16000 1800 14400 0 0 1800 14400Nos 1200 18 21600 3000 54000 0 0 3000 54000Nos 0 0

29.3 Thermocouple cable Nos 0 0Nos 750 8 6000 600 4800 0 0 600 4800Nos 1500 14 21000 400 5600 0 0 400 5600

29.4 Digital & control cable NosNos 2300 8 18400 1500 12000 0 0 1500 12000Nos 600 8 4800 500 4000 0 0 500 4000Nos 1400 8 11200 1000 8000 0 0 1000 8000Nos 1800 12 21600 1000 12000 0 0 1000 12000Nos 1100 14 15400 500 7000 0 0 500 7000Nos 2000 14 28000 1000 14000 0 0 1000 14000Nos 1500 17 25500 500 8500 0 0 500 8500

29.5 Data highway cable (twisted/co-axial) Nos 200 8 1600 200 1600 0 0 200 160029.6 Gate way cable Nos 100 8 800 100 800 0 0 100 80029.7 Signal cables for TSI system Nos 100 8 800 100 800 0 0 100 80030.0 Cable Termination Nos30.1 Analog Nos

Nos 100 40 4000 100 4000 0 0 100 4000Nos 200 45 9000 200 9000 0 0 200 9000Nos 800 170 136000 600 102000 0 0 600 102000

19. 20. 21. 22.

DCS System Cabinets/ Marshalling / Opto coupling / Relay / ACDB/DCDB Cabinets (2100 ( hH) x 1200 ( L ) x 600 ( D ))23.

Operator stations ( shifting of existing US station and installation of GUS station )24.

25. 26. 27.

a) 1 P x 1.0 mm2

b) 4 P x 1.0 mm2

c) 10 P x 1.0 mm2

d) 12 P x 1.0 mm2

a) 2T/1 T x 1.5 mm2

b) 10 T x 1.5 mm2

a) 1 P Kx x 1.95 mm2

b) 10P Kx x 1.95 mm2

a) 2 C x 1.5 mm2

b) 2 C x 2.5 mm2

c) 4 C x 1.5 mm2 d) 7 C x 1.5 mm2 e) 10 C x 1.5 mm2 f) 12 C x 1.5 mm2 g) 27 C x 1.5 mm2

a) 1 P x 1.0 mm2

b) 4 P x 1.0 mm2 c) 10 P x 1.0 mm2

Page 38 of 41





Sl. No.

ORDERED QTY

UNIT RATE (in

Rs)

ORDERED AMOUNT

Nos 400 190 76000 400 76000 0 0 400 7600030.2 RTD Cables Nos

Nos 100 40 4000 100 4000 0 0 100 4000Nos 700 250 175000 400 100000 0 0 400 100000

30.3 Thermocouple cable NosNos 60 40 2400 60 2400 0 0 60 2400Nos 300 170 51000 80 13600 0 0 80 13600

30.4 Digital & control cable NosNos 1000 40 40000 400 16000 0 0 400 16000Nos 60 40 2400 100 4000 0 0 100 4000Nos 700 45 31500 200 9000 0 0 200 9000Nos 600 70 42000 300 21000 0 0 300 21000Nos 550 100 55000 200 20000 0 0 200 20000Nos 2500 120 300000 1500 180000 0 0 1500 180000Nos 2000 250 500000 500 125000 0 0 500 125000

30.5 Data highway cable Nos 16 50 800 16 800 0 0 16 80030.6 Gateway cable Nos 20 50 1000 20 1000 0 0 20 100031.0 Tubing / Piping Nos31.1 ½” SS tubing Nos 200 30 6000 200 6000 0 0 200 600031.2 ¼” PVC coated copper tubing Nos 150 30 4500 100 3000 0 0 100 300031.3 ½” Piping Nos 100 30 3000 100 3000 0 0 100 300032.0 Instrument air manifold Nos 4 500 2000 4 2000 0 0 4 200033.0 Structural steel Nos 1.5 14000 21000 2.5 35000 0 0 2.5 3500034.0 GI wire Nos 500 5 2500 500 2500 0 0 500 250035.0 GI flat Nos 50 15 750 50 750 0 0 50 75036.0 Nos UR 15 0 0 0 0 0 0 037.0 Nos UR 1000 0 0 0 0 0 0 0

TOTAL 0 1235800 0 0 0GRAND TOTAL 443700.0 0 1768750.0 0.0 1768750

d) 12 P x 1.0 mm2

a) 1 T x 1.5 mm2

b) 10 T x 1.5 mm2

c) 1 P Kx x 1.95 mm2

d) 10 P Kx

h) 2 C x 1.5 mm2

i) 2 C x 2.5 mm2

j) 4 C x 1.5 mm2 k) 7 C x 1.5 mm2 l) 10 C x 1.5 mm2 m) 12 C x 1.5 mm2 n) 27 C x 1.5 mm2

Providing / fixing equipment with anchor bolt / fastner in any concrete at all elevations.Chipping of existing brick work and finishing for providing opening for tray work (250 mm thick wall)

ANNEXURE-IA

Sl. No. Description Qty.

Unit Price

Units ErectionQTY. AMOUNT

Pressure Gauge 43 Nos. 600 25800Pressure Transmitter 12 Nos. 2050 24600Pressure Switch 10 Nos. 850 8500Diff. Pressure Indicator 1 Nos. 1000 1000Diff. Pressure Switch 2 Nos. 850 1700I/P Converter 11 Nos. 600 6600Temperature Gauge 38 Nos. 600 22800Temperature Elements 12 Nos. 800 9600Temperature Switch 1 Nos. 750 750Level Gauge 8 Nos. 700 5600

1 Nos. 1200 1200

20 Nos. 1750 35000DP type Flow Transmitter 2 Nos. 1200 2400Flow nozzle 1 Nos. 800 800Orifice assembly 1 Nos. 500 500Speed Probe 2 Nos. 800 1600Vibration Probes with JB’s 5 Nos. 950 4750

2 Nos. 1050 2100

14 Nos. 1050 14700

14 Nos. 950 13300

1 Nos. 1050 1050Proximitor with JB’s 60 Nos. 900 54000Control Valves 9 Nos. 1200 10800PRDS 1 Nos. 1200 1200On / Off Valves 1 Nos. 900 900Safety Valve 1 Nos. 1200 1200Turbine Control Panel 1 Nos. 9000 9000

1 Nos. 8000 8000

1 Nos. 12000 12000

1 Nos. 22500 22500Junction box 45 Nos. 150 6750Air pot 10 Nos. 200 2000Air Filter Regulator 15 Nos. 800 12000

44 Impulse Tubing 1000 Mtrs 30 3000045 Impulse Piping 600 Mtrs 40 2400046 Pneumatic Tubing 300 Mtrs 30 900047 Structural Steel 4 Tons 14000 56000

Total 443700

Schedule of Quantities & Rates for Fabrication, Erection, Checking, Calibration, Loop Checking, No-Load & Load Trials of Instrumentation Equipment of Kymore 25 MW CPP Project

Total Price(in

Rs)

Work done upto Jan 07'

Testing & Calibration

Loop Checking

Unit Price( in

Rs)1. 2. 3. 4. 5. 6. 7. 8. 9. 10.

11. Displacer type Level Transmitter

12. Level Switch – Top mounted & side mounted

13. 14. 15. 16. 17.

18. Axial Displacement Probes with JB’s

19. Radial Shaft Vibration Probes with JB’s

20. Bearing Metal Temperature Probes

21. Casing Expansion Probe with JB’s

22. 23. 24. 25. 26. 27.

28.

Control panel for Digital Automatic Voltage Regulator Panel

29.

25MW, 11KV, STG Control & Synchronizing Panel (Simplex)

30.

25MW, 11KV, STG Relay Panel (Simplex – Swing Type)

31. 32. 33.

ANNEXURE-IB

Sl. No. Description Qty

Unit Price

Units ErectionI/P converter 6 Nos 600 3600Safety Relief Valve 1 Nos 1200 1200Vibration Monitoring System 8 Nos 950 7600Target type level indicators 1 Nos 1200 1200

3 Nos 1750 5250

1 Nos 1200 1200Displacer type level transmitter 1 Nos 1200 1200

9 Nos 1000 9000Pressure gauges 22 Nos 600 13200

7 Nos 2100 14700Pressure switches 11 Nos 850 9350

10 Nos 600 6000Temperature element (RTD) 11 Nos 800 8800

4 Nos 850 3400Thermo well 2 Nos 250 500Level gauges 2 Nos 700 1400Control valves 2 Nos 1200 2400On-Off Valves 1 Nos 900 900Ultrasonic Level Transmitter 1 Nos 4500 4500Safety / Relief Valves 1 Nos 1200 1200

21 Nos 200 4200

6 Nos 7000 42000

2 Nos 2500 5000DOT matrix printer 1 Nos 300 500Color desk jet type printer 1 Nos 300 300Printer table 2 Nos 500 1000Cabling

29.1 Analog1000 Mtrs 8 80002500 Mtrs 10 250002000 Mtrs 14 280001500 Mtrs 15 22500

29.2 RTD Cables Mtrs2000 Mtrs 8 160001200 Mtrs 18 21600

29.3 Thermocouple cable Mtrs750 Mtrs 8 6000

1500 Mtrs 14 2100029.4 Digital & control cable

2300 Mtrs 8 24000600 Mtrs 8 4800

1400 Mtrs 8 200001800 Mtrs 12 18000

Schedule of Quantities & Rates for Fabrication, Erection, Checking, Calibration, Loop Checking, No-Load & Load Trials of Instrumentation Equipment of Kymore 25 MW CPP Project

Total Price(In Rs)

Testing & Calibration

Loop Checking

Unit Price (In

Rs)1. 2. 3. 4.

5. Target type level switch (top & side mounted)

6. Differential pressure type level transmitter

7.

8. Displacer type level switch top & side mounted

9.

10. Pressure transmitters with 3 Way Manifolds

11.

12. Temperature gauges capillary type

13.

14. Temperature element (Thermocouple)

15. 16. 17. 18. 19. 20.

21. Junction box (20T, 30T, 50T & 60T)

22.

DCS System Cabinets/ Marshalling / Opto coupling / Relay / ACDB/DCDB Cabinets (2100 ( hH) x 1200 ( L ) x 600 ( D ))

23.

Operator stations ( shifting of existing US station and installation of GUS station )

24. 25. 26. 27.

a) 1 P x 1.0 mm2

b) 4 P x 1.0 mm2

c) 10 P x 1.0 mm2

d) 12 P x 1.0 mm2

a) 1 T x 1.5 mm2

b) 10 T x 1.5 mm2

a) 1 P Kx x 1.95 mm2

b) 10P Kx x 1.95 mm2

a) 2 C x 1.5 mm2

b) 2 C x 2.5 mm2

c) 4 C x 1.5 mm2 d) 7 C x 1.5 mm2

Sl. No. Description Qty

Unit Price

Units ErectionTotal Price(In

Rs)Testing &

CalibrationLoop

Checking

Unit Price (In

Rs)1100 Mtrs 14 140002000 Mtrs 14 560001500 Mtrs 17 25500

29.5 200 Mtrs 8 160029.6 Gate way cable 100 Mtrs 8 80029.7 Signal cables for TSI system 100 Mtrs 8 800

30 Cable Termination30.1 Analog

100 Nos 40 4000200 Nos 45 9000800 Nos 170 136000400 Nos 190 76000

30.2 RTD Cables100 Nos 40 4000700 Nos 250 175000

30.3 Thermocouple cable Nos60 Nos 40 2400300 Nos 170 51000

30.4 Digital & control cable Nos1000 Nos 40 4000060 Nos 40 2400700 Nos 45 31500600 Nos 70 42000550 Nos 100 55000

2500 Nos 120 3000002000 Nos 250 500000

30.5 Data highway cable 16 Nos 50 80030.6 Gateway cable 20 Nos 50 1000

31 Tubing / Piping31.1 ½” SS tubing 200 Mtrs 30 600031.2 ¼” PVC coated copper tubing 150 Mtrs 30 450031.3 ½” Piping 100 Mtrs 30 3000

32 Instrument air manifold 4 Nos 500 200033 Structural steel 1.5 Tons 14000 2100034 GI wire 500 Mtrs 5 250035 GI flat 50 Mtrs 15 750

36 UR 15

37 UR 1000

Total 1,933,050

e) 10 C x 1.5 mm2 f) 12 C x 1.5 mm2 g) 27 C x 1.5 mm2 Data highway cable (twisted/co-axial)

a) 1 P x 1.0 mm2

b) 4 P x 1.0 mm2 c) 10 P x 1.0 mm2

d) 12 P x 1.0 mm2

a) 1 T x 1.5 mm2

b) 10 T x 1.5 mm2

c) 1 P Kx x 1.95 mm2

d) 10 P Kx

h) 2 C x 1.5 mm2

i) 2 C x 2.5 mm2

j) 4 C x 1.5 mm2 k) 7 C x 1.5 mm2 l) 10 C x 1.5 mm2 m) 12 C x 1.5 mm2 n) 27 C x 1.5 mm2

Providing / fixing equipment with anchor bolt / fastner in any concrete at all elevations.

Chipping of existing brick work and finishing for providing opening for tray work (250 mm thick wall)

Date post:	24-Nov-2014
Category:	Documents
Upload:	cvsrikala
View:	152 times
Download:	4 times

Nitson Kymore CPP ERECTION DEVIATION

Documents