publib.boulder.ibm.compublib.boulder.ibm.com/tividd/td/opc/eqqx0mst/en... · Notices Trademarks The...

TME 10 Operations Planning and Control IBM

Master IndexVersion 2 Release 1

SH19-4375-00

Note

Before using this information and the product it supports, be sure to read the general information under “Notices” on page 5.

ISO 9001 Certification

This product was developed using an ISO 9001 certified quality system.

Certification has been awarded by the Italian quality system certification group, CSQ (Certification No. CISQ/CSQ 9151.IBM1).

CSQ is a member of the mutually recognized organization of European assessors, ITQS, which assesses and certifies quality systems in thefield of information technology enterprises.

First Edition (March 1997)

This edition applies to Version 2 Release 1 of TME 10 Operations Planning and Control, Program Number 5697-OPC, and toall subsequent releases and modifications until otherwise indicated in new editions. Make sure you are using the correct editionfor the level of the product.

Order publications through your IBM representative or the IBM branch office serving your locality. Publications are not stockedat the address below.

IBM welcomes your comments. A form for readers' comments appears at the back of this publication. If the form has beenremoved, address your comments to:

TME 10 OPC Information DevelopmentRome Tivoli LaboratoryIBM SEMEA S.p.A.Via Sciangai, 5300144 RomeItaly Fax Number (+39) 6 5966 2077 Internet ID: ROMERCF at VNET.IBM.COM

When you send information to IBM, you grant IBM a nonexclusive right to use or distribute the information in any way itbelieves appropriate without incurring any obligation to you.

Copyright International Business Machines Corporation 1991, 1997. All rights reserved.Note to U.S. Government Users — Documentation related to restricted rights — Use, duplication or disclosure is subject torestrictions set forth in GSA ADP Schedule Contract with IBM Corp.

Contents

Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5Trademarks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

Copyright IBM Corp. 1991, 1997 3

4 TME 10 OPC Master Index

Notices

References in this publication to IBM products, programs, or services do not imply thatIBM intends to make these available in all countries in which IBM operates. Anyreference to an IBM product, program, or service is not intended to state or imply thatonly IBM’s product, program, or service may be used. Subject to IBM's valid intellectualproperty or other legally protectable rights, any functionally equivalent product, program,or service may be used instead of the IBM product, program, or service. The evaluationand verification of operation in conjunction with other products, except those expresslydesignated by IBM, is the user’s responsibility.

IBM may have patents or pending patent applications covering subject matter in thisdocument. The furnishing of this document does not give you any license to these patents.You can send license inquiries, in writing, to:

IBM Director of LicensingIBM Corporation500 Columbus AvenueThornwood, New York 10594USA

Licensees of this program who wish to have information about it for the purpose ofenabling: (i) the exchange of information between independently created programs andother programs (including this one) and (ii) the mutual use of the information which hasbeen exchanged, should contact:

IBM CorporationP.O. Box 121953039 CornwallisResearch Triangle Park, NC 27709-2195USA

Such information may be available, subject to appropriate terms and conditions, includingin some cases, payment of a fee.


Notices

TrademarksThe following terms are trademarks of the IBM Corporation in the United States or othercountries or both:

The following names are trademarks or service marks of others:

DEC Digital Equipment CorporationHewlett-Packard Hewlett-Packard Corp.HP-UX Hewlett-Packard Corp.Solaris Sun Microsystems, Inc.SPARC SPARC International, Inc.SPARCstation SPARC International, Inc.Sun Sun Microsystems, Inc.SunOS Sun Microsystems, Inc.Tivoli Tivoli, IncorporatedTME Tivoli, IncorporatedTME 10 Tivoli, IncorporatedVMS Digital Equipment Corporation

Microsoft, Windows, and the Windows 95 Logo are trademarks or registered trademarks ofMicrosoft Corporation.

UNIX is a registered trademark in the United States and other countries licensedexclusively through X/Open Company Limited.

Other company, product, and service names may be trademarks or service marks of others.

ACF/VTAM AIXAIX/6000 AS/400BookManager CICSDATABASE 2 DB2DFSMS/MVS DFSMShsmDFSORT Extended Services for OS/2GDDM HiperbatchHiperspace IBMIBMLink IMSLoadLeveler MVS/DFPMVS/ESA MVS/SPMVS/XA NetViewOPC Operating System/2OS/2 OS/390OS/400 Personal System/2PS/2 RACFRISC System/6000 RS/6000SAA Sysplex TimerSystems Application Architecture VM/ESAVTAM Workplace Shell


Introduction

This book contains the TME 10 IBM Operations Planning and Control (TME 10 OPC)master index. The master index consists of the combined indexes of the followingpublications:

TME 10 Operations Planning and Control:

General Information, GH19-4372-00

Getting Started, SH19-4481-00 SH19-4486-00

Installation Guide, SH19-4379-00

Customization and Tuning, SH19-4380-00

Planning and Scheduling the Workload, SH19-4376-00

Controlling and Monitoring the Workload, SH19-4377-00

Programming Interfaces, SH19-4378-00

Getting Started with the GUI for Application Description,

Workload Monitor/2 User's Guide, SH19-4482-00

Tracker Agent for OS/400 Installation and Operation, SH19-4484-00

Tracker Agents for AIX/UNIX/VMS Platforms Installation and Operation,SH19-4485-00

Tracker Agents for OS/2 and Windows NT Platforms Installation and Operation,SH19-4483-00

Diagnosis Guide and Reference, LY19-6405-00

The entries in this index contain the following abbreviations that identify the book inwhich the entry can be found:

Abbr. Book

GI General Information

GS Getting Started

IG Installation Guide

CT Customization and Tuning

PSW Planning and Scheduling the Workload

CMW Controlling and Monitoring the Workload

PI Programming Interfaces

GUI Getting Started with the GUI for Application Description

WMUG Workload Monitor/2 User's Guide

T4 Tracker Agent for OS/400 Installation and Operation

UX Tracker Agents for AIX/UNIX/VMS Platforms Installation and Operation

OW Tracker Agents for OS/2 and Windows NT Platforms Installation and Operation

DGR Diagnosis Guide and Reference


Index

Special Characters? (question mark) variablesPSW:267* (asterisk) global search characterPSW:294* (asterisk) operation status codePSW:323, CMW :101* (asterisk) Ready, status for operationsWMUG :44* (asterisk) use in generic search argumentsCMW :14*, use in generic search argumentsGS:9& (ampersand) variablesPSW:265% (percent) global search characterPSW:294% (percent) use in generic search argumentsCMW :14% (percent) variablesPSW:266%, use in generic search argumentsGS:9= (equals) ISPF quick return commandCMW :12=, ISPF quick return commandGS:7

AA extended status codePSW:324, CMW :102A operation status codePSW:323, CMW :101A4 (APPC tracker router) subtaskDGR:43abend codes DGR:205

grouping together PSW:251ABEND keyword DGR:11ABENDU keyword DGR:12access code, IBM DGR:5ACCESS keyword of AUDIT CT:13access to TME 10 OPC dialogsCT:102ACTION keyword PSW:130, PSW:138, PSW:144ACTIVATE parameter of SETROPTS, RACFCT:94activating

API (application programming interface)IG :82NCF IG :79server IG :86subtasks IG :5

activating automatic recoveryPSW:252activating event-triggered tracking (ETT)PSW:195,

PSW:256activating JCL variable substitutionPSW:264activating job submissionPSW:193active

application status PSW:73actual quantity CMW :88actual start date and timeWMUG :4actual workstation resource report in DPDGR:74AD (application description) databasePSW:120, DGR:28AD NOT FOUND ON AD FILE messagePSW:168AD record

deleting PI:13format PI:69high date considerationsPI:9inserting PI:21

AD record(continued)replacing PI:39selecting PI:45

AD segmentreplacing PI:40

ADCOM segmentlisting PI:28record format PI:69selecting PI:45

add_agent commandUX:15, OW:12ADDEP PSW:143ADDEP batch-loader control statementPSW:143ADDEP segment

record format PI:73Adding an Application to the Current Plan panelCMW :46Adding an Occurrence Group to the CP panelCMW :52adding and deleting operationsCMW :58adding applications to the current planGS:57Adding Applications to the Current Plan panelCMW :45adding dependenciesCMW :49adding users to a groupUX:18ADDR keyword of APPCROUT CT:9, T4:9ADGROUPID keyword PSW:128ADID keyword PSW:128, PSW:146adjusted quantity CMW :88ADKEY segment

listing PI:28record format PI:70

administrator user ID UX:18ADOP batch-loader control statementPSW:136ADOP segment

record format PI:72ADOPPWTO keyword PSW:140ADR (application description) layoutDGR:69ADRROUT PI:9ADRULE batch-loader control statementPSW:132ADRUN batch-loader control statementPSW:129ADRUN segment

ADRVALT field PI:9record format PI:70

ADSR batch-loader control statementPSW:123, PSW:141ADSR segment

record format PI:73ADSTART batch-loader control statementPSW:127ADTYPE keyword PSW:128ADVALFROM keyword PSW:128advanced program-to-program communication

(APPC) GI :29, PI:53, DGR:27, DGR:42AEC keyword PSW:138AIX

sample tracker CT:264


AIX requirements, hardware and softwareUX:109AIX/6000

software requirements for controlled systemGI :52,IG :180

AIX/6000 workloadmanaging GI :13

alert messageOperation List object

saving WMUG :61Plan object WMUG :17

alert when deadline passesPSW:99alerts

general description WMUG :5monitoring WMUG :55NetView generic alert vectorsCT:249Operations List object WMUG :56

receiving WMUG :60selecting statusesWMUG :57stopping WMUG :60

Plan object WMUG :11receiving WMUG :16specifying settings WMUG :15specifying several WMUG :17

threshold WMUG :15ALERTS initialization statement CT:6

example of CT:8GENALERT keyword CT:6MLOG keyword CT:6RECEIVERID keyword CT:6WTO keyword CT:7

Alerts pageOperations List object WMUG :56Plan object WMUG :15

alerts, passing to NetViewGI :26all dependencies of an operationGS:49All Dependencies of an Operation panelCMW :38All Open Time Intervals panelPSW:34all workstations closed PSW:374all-days cyclic periods PSW:58allocated special resourcesCMW :91allocation status of special resourcesGS:20, PSW:47ALPHA value in variable validation PSW:278altering dependenciesCMW :57altering resources CMW :93alternate current plan (CP2)DGR:30alternate current plan dataset (EQQCP2DS)PSW:186,

DGR:29alternate workstationsPSW:24, CMW :65, WMUG :2

automatic recovery PSW:233automatic rerouting to PSW:97recovery with catalog managementPSW:227

AMOUNT keyword of AUDIT CT:13ampersand (&) variablesPSW:265AOC/MVS PSW:51AOC/MVS (Automated Operations Control/MVS)GI :3

AOC/MVS OPC Automation FeatureGI :3APAR (authorized program analysis report)DGR:7

closing DGR:9collecting documentation forDGR:7mailing DGR:8, DGR:9process DGR:7tape function PSW:195

API (application programming interface)GI :29, PI:53—68,DGR:42

activating support for IG :49, IG :82APPC PI:53application transaction program (ATP)PI:53buffer layouts PI:55

APP section PI:56APPDAT section PI:61APPFLD section PI:61APPOBJ section PI:58APPSEL section PI:59APPVAL section PI:60

communication, establishingPI:53CPI-C verbs PI:54

CMACCP PI:54CMALLC PI:54CMCFMD PI:54CMINIT PI:54CMRCV PI:54CMSED PI:54CMSERR PI:54CMSLD PI:54CMSTPN PI:55

EBCDIC to ASCII code conversionPI:54objects PI:62

BACKUP_EVENT fields PI:113CP_OPEN_INTERVAL fields PI:108CP_OPER_EVENT fields PI:109CP_OPERATION fields PI:101CP_OPINFO_EVENT fields PI:111CP_RESOURCE fields PI:105CP_SR_EVENT fields PI:112CP_STATUS fields PI:100CP_WORK_STATION fields PI:106CP_WS_EVENT fields PI:114selecting instancesPI:63selection field types PI:64

partner transaction programPI:54reason codes PI:65return codes PI:65samples PI:116security CT:96, PI:67

APPC/MVS and RACF CT:96TME 10 OPC and RACF CT:97

selection criteria, specifyingPI:64send/receive buffer formatsPI:55transaction program (TP) namesPI:53, PI:55, PI:67

APP (fixed section)description PI:56


APP (fixed section)(continued)record format PI:56

APP buffer section, EQQUSINdescription CT:152record format CT:152

APPCcontrolling access from CT:96

APPC (advanced program-to-programcommunication) GI :29, PI:53, DGR:27, DGR:42

APPC controller description, creatingT4:27APPC device description, verifyingT4:37APPC keyword of ROUTOPTSCT:72, T4:8APPC line description, displayingT4:26APPC tracker router (A4) subtaskDGR:43APPC/MVS

options, updating in SYS1.PARMLIB IG :49, IG :85,IG :89, T4:14

APPC/MVS (PP) subtaskDGR:42APPCPMnn member of SYS1.PARMLIBIG :49, IG :85,

IG :89APPCROUT initialization statementCT:9, T4:9

ADDR keyword CT:9, T4:9example of CT:9WORKSTATIONS keyword CT:9, T4:9

APPCTASK keyword of OPCOPTSCT:57APPDAT (data section)

description PI:61record format PI:61

APPDAT buffer section, EQQUSINdescription CT:157record format CT:157updating objects

CP_OPER_EVENT CT:161CP_OPINFO_EVENT CT:163CP_SR_EVENT CT:162CP_WS_EVENT CT:163

APPFLD (field section)description PI:61record format PI:61

APPFLD buffer section, EQQUSINdescription CT:156record format CT:156updating objects

CP_OPER_EVENT CT:161CP_OPINFO_EVENT CT:163CP_SR_EVENT CT:162CP_WS_EVENT CT:163

APPLresource class IG :54statements

API (application programming interface)IG :83local LU for the server, defining IG :87local LU, defining IG :83NCF IG :79, IG :81

APPL statementsdefining local LU T4:13

APPL statements(continued)defining SNA resourcesT4:12

applicationbatch loading of GI :46definition of GI :14

application description WMUG :3copying GUI :37creating GUI :27dataset (EQQADDS) recoveryCT:199deleting GUI :37feedback algorithms CT:43feedback exit (EQQUX003) CT:118modifying GUI :37viewing GUI :23

application description (ADR) layoutDGR:69application description databaseDGR:28

input to current plan PSW:175application description dataset (EQQADDS)IG :57

considerations when allocatingIG :60Application Description dialog PSW:69application description notebookGUI :23application details pageGUI :24application groups

adding to the current planCMW :44guidelines PSW:68specifying PSW:71

application listsapplying a layout to GUI :21creating GUI :16details view GUI :17icon view GUI :19purpose GUI :14refreshing GUI :19

application node definitions, NCFIG :79application programmer GI :38application programming interface (API)GI :29, PI:53—68,

DGR:42activating support for IG :49, IG :82APPC PI:53application transaction program (ATP)PI:53buffer layouts PI:55


communication, establishingPI:53CPI-C verbs PI:54

CMACCP PI:54CMALLC PI:54CMCFMD PI:54CMINIT PI:54CMRCV PI:54CMSED PI:54CMSERR PI:54CMSLD PI:54

Index 5

application programming interface (API)(continued)CPI-C verbs(continued)

CMSTPN PI:55EBCDIC to ASCII code conversionPI:54objects PI:62

BACKUP_EVENT fields PI:113CP_OPEN_INTERVAL fields PI:108CP_OPER_EVENT fields PI:109CP_OPERATION fields PI:101CP_OPINFO_EVENT fields PI:111CP_RESOURCE fields PI:105CP_SR_EVENT fields PI:112CP_STATUS fields PI:100CP_WORK_STATION fields PI:106CP_WS_EVENT fields PI:114selecting instancesPI:63selection field types PI:64

partner transaction programPI:54reason codes PI:65return codes PI:65samples PI:116security CT:96, PI:67

APPC/MVS and RACF CT:96TME 10 OPC and RACF CT:97

selection criteria, specifyingPI:64send/receive buffer formatsPI:55transaction program (TP) namesPI:53, PI:55, PI:67

application transaction program (ATP)PI:53, DGR:42applications PSW:65—113

adding to the current planGS:57, CMW :44application description GS:23

defining GS:24priority, specifying GS:24

common data PSW:377considerations PSW:65creating GS:24, PSW:12cross-reference list PSW:380cross-references of job names and active

applications PSW:375excluding CMW :52group definition GS:23ID PSW:67, PSW:73, WMUG :3in the long-term plan PSW:171internal operation logic reportPSW:378JCL variable tables PSW:262job description GS:23mass update reportPSW:382naming standardsPSW:67operation data PSW:378operations GS:28operations using particular workstations reportPSW:379run cycles GS:26scheduling PSW:74specifying PSW:71status GS:24, PSW:73types GS:23

applications (continued)updating in batch PSW:115valid-from date GS:24, PSW:73valid-to date PSW:73

APPLID keyword of DBCSOPTS CT:23applying a layout to a list GUI :21applying the fix DGR:9APPN configuration list

changing T4:25checking T4:24

APPOBJ (object section)description PI:58record format PI:58

APPOBJ buffer section, EQQUSINdescription CT:153record format CT:154specifying an object nameCT:154

APPQ DGR:43APPSEL (selection section)

description PI:59record format PI:59

APPSEL buffer section, EQQUSINdescription CT:155record format CT:155selecting objects CT:157

BACKUP_EVENT CT:160CP_OPER_EVENT CT:157CP_OPINFO_EVENT CT:159CP_SR_EVENT CT:158CP_WS_EVENT CT:160

APPVAL (selection value section)description PI:60record format PI:60

APPVAL buffer section, EQQUSINdescription CT:156record format CT:156selecting objects


APRIL keyword PSW:134AR (automatic recovery) subtaskDGR:44, DGR:47ARC row command PSW:249, CMW :80AROPTS initialization statementCT:10, PSW:194

AUTHUSER keyword CT:10, PSW:249ENDTIME keyword CT:10, PSW:239example of CT:11EXCLUDECC keyword CT:11EXCLUDERC keyword CT:11PREDWS keyword CT:11, PSW:247STARTTIME keyword CT:11, PSW:239USERREQ keyword CT:11, PSW:249

ARPARM keyword of OPCOPTS CT:57


arrival timespecifying GS:32, PSW:101

Arriving, status for operation alertsWMUG :57Arriving, status for operationsWMUG :44AS/400


AS/400 workloadmanaging GI :13, GI :42

ASCII PI:54associating variable tables with applicationsPSW:262asterisk (*) global search characterPSW:294asterisk (*) operation status codePSW:323, CMW :101ATP (application transaction program)PI:53, DGR:42ATTR command CMW :16attributes

reporting, for workstations PSW:29AUDIT initialization statement CT:12

ACCESS keyword CT:13AMOUNT keyword CT:13example of CT:13FILE keyword CT:13

audit trail of failed jobs PSW:250audit trail of recovery actionsPSW:250audit trails

report PSW:182audit-trail facility GI :36auditing

sample audit packageCT:265statements relating toCT:81

AUGUST keyword PSW:134AUTHCMD statement, updating for TME 10 OPC TSO

commands IG :48AUTHDEF initialization statement CT:14

CLASS keyword CT:14example of CT:15LISTLOGGING keyword CT:15security PSW:249SUBRESOURCES keywordCT:15TRACE keyword CT:15

authority checking GI :36authority group ID PSW:72authority requirements T4:15, T4:32, T4:36authority to use dialogsCT:102authority, problem determination proceduresIG :100authorization

and batch programsPSW:330authorized program analysis report (APAR)DGR:7

closing DGR:9collecting documentation forDGR:7mailing DGR:8process DGR:7tape function PSW:195

AUTHTSF statement, updating for EQQMINORIG :48AUTHUSER keyword of AROPTS CT:10, PSW:249

Automated Operations Control/MVS (AOC/MVS)GI :3automatic

job submission GI :25, PSW:96reporting attribute PSW:30restart CMW :80status checking GI :28status reporting GI :29

automatic job and started-task recoveryGI :26—28,PSW:231—253

activating PSW:194deactivating PSW:194examples PSW:20

automatic job recoveryexit CT:144statements relating toCT:84

automatic recoveryconsiderations PSW:210

automatic recovery (AR) subtaskDGR:44, DGR:47automatic recovery case code listDGR:78automatic startup UX:66, OW:41automatic-recovery-procedure library (EQQPRLIB)IG :62

considerations when allocatingIG :68automation GI :4automation options PSW:95automation using ETT PSW:259availability GI :9, CMW :83

controlling with NetView PSW:51controlling with RODM PSW:51intervals CMW :88special resourcesPSW:39, PSW:313

and LOOKAHEAD PSW:51workstation PSW:33

Availability of a Workstation panel PSW:33avoiding loops in variable substitutionPSW:298AWSCL record

deleting PI:13AWSCL segment

listing PI:28record format PI:74selecting PI:45

Bbackup and recovery of datasetsCT:193—206BACKUP command IG :48, CT:41, CT:44

description PSW:302backup event (EXE) layoutDGR:126backup event (EXH) layout DGR:126BACKUP keyword of JTOPTS CT:41, PSW:189, PSW:302backup system GI :27backup workstation PSW:24, PSW:233BACKUP_EVENT object

field names PI:113BACKUP_EVENT object, EQQUSIN CT:160backward references in JCLPSW:253

Index 7

Batch Command Interface Tooldescription PI:119

batch jobssecurity IG :51to update the LTP PSW:164userid of TME 10 OPC submitted jobsIG :51

batch loader GI :46, PSW:69, PSW:119control statements PSW:121

syntax and constructionPSW:124error messagesPSW:150reasons for using PSW:115

batch programs CMW :19, DGR:33EQQADCOP PSW:332EQQADDEP PSW:333EQQADMUP PSW:334EQQADPRT PSW:335EQQADXRF PSW:337EQQAXR00 PSW:338EQQBATCH PSW:329EQQCLPRC PSW:339EQQCLPRP PSW:340EQQDNTOP PSW:341EQQDOTOP PSW:344EQQDRTOP PSW:346EQQDTTOP PSW:348EQQEVPGM PSW:350EQQJVPRT PSW:351EQQLTCRE PSW:352EQQLTMOA PSW:353EQQLTMOO PSW:356EQQLTPRT PSW:357EQQLTTRY PSW:359EQQOIBAT PSW:361EQQOIBLK PSW:362EQQPURGE PSW:365EQQRCSIM PSW:368EQQWSPRT PSW:369EQQYLTOP PSW:369

batch-jobsgenerating skeleton JCLIG :37

BATCHOPT initialization statementCT:16CALENDAR keyword CT:16CHECKSUBSYS keyword CT:17CONTROLLERTOKEN keyword CT:17DATEFORM keyword CT:17DB2AVAIL keyword CT:17DB2SYSTEM keyword CT:17DPALG keyword CT:17DPROUT keyword CT:18DYNAMICADD keyword CT:18, PSW:52example of CT:22HDRS keyword CT:18LOGID keyword CT:18LTPDEPRES keyword CT:19NCPTROUT keyword CT:19OCPTROUT keyword CT:19

BATCHOPT initialization statement(continued)OPERDALL keyword CT:19OPERHISTORY keyword CT:20OPERIALL keyword CT:20PAGESIZE keyword CT:20PLANHOUR keyword CT:20, PSW:180PREDWS keyword CT:20PREVRES keyword CT:20, PSW:180RETAINOPER keyword CT:20, CT:21SUBSYS keyword CT:21SUCCWS keyword CT:21VALEACTION keyword CT:21

beep alert WMUG :15BEGIN JCL directive PSW:290benefits of GUI GI :6benefits of TME 10 OPC GI :1—11BIB block DGR:17bibliography GUI :55BIT value in variable validation PSW:278blank, extended status codePSW:324, CMW :102books, OPC GUI :55boot startup UX:66, OW:41broadcasting eventsCT:157—172, PI:64, PI:110browsing an occurrenceGS:41browsing application occurrencesGS:46browsing dependenciesGS:41Browsing General Current Plan Information panelCMW :40browsing most critical occurrencesGS:50Browsing Most Critical Occurrences panelCMW :37browsing operation dataGS:42Browsing Operation Input/Output Stream panelCMW :75Browsing Summary of Activities at a Workstation

panel CMW :39browsing system informationCMW :39, CMW :67browsing the job log CMW :73buffer layouts (API) PI:55


BUILDSSX keyword of OPCOPTS CT:57business processing cycleGI :20buttons, mouse settingsWMUG :9

CC extended status codePSW:324, CMW :102C occurrence status codePSW:323, CMW :101C operation status codePSW:323, CMW :101C row command CMW :56, CMW :72C32 subdirectory WMUG :91

updating the CONFIG.SYS fileWMUG :92calendar CMW :10

creating GS:18, PSW:10


calendar (continued)default in dialog GS:7defining PSW:55—58definition of GI :19extra PSW:58for variable substitution PSW:299free days GS:18general description GS:18general information reportPSW:372period characteristics reportPSW:373search order PSW:55specific dates reportPSW:372specifying PSW:72status of days reportPSW:372work days GS:18work-day end time GS:18, PSW:10

calendar and workstation dataset (EQQWSDS)IG :58calendar databaseDGR:28CALENDAR keyword PSW:128CALENDAR keyword of BATCHOPT CT:16calendar layout DGR:74CALLnn keyword of EXITS CT:28CAN error code PSW:325, CMW :103CANCEL command GS:5, PSW:25CANCEL command, MVS/ESA PSW:320, CMW :98case code list layoutDGR:78case code macro (EQQCASEC)DGR:45case codes PSW:251case-code-definition module (EQQCASEM)CT:11, CT:188case-code-list definition macro (EQQCASEC)CT:11,

CT:188, CT:255CAT row command CMW :73CATACT keyword of OPCOPTS CT:58, PSW:225catalog managementGI :27, PSW:223—229, CMW :73,

CMW :79considerations PSW:210delete datasetsPSW:223ECSA (extended common service area), use ofIG :43keywords, used by

CATACT CT:58CATMCLAS CT:36CATMDISP CT:36CATMGT CT:58CHSMWAIT CT:37DESTID CT:72JOBLOGDEST CT:60JOBLOGRETRIEVAL CT:37MAXNUMUSYS CT:39STORELOG CT:62SYSID CT:73

on a TME 10 OPC tracker subsystemPSW:227pre-catalog-management exit (EQQUX008)CT:129rerunning occurrencesCMW :55sample configurations, descriptionIG :163, IG :166specifying for an operationPSW:96statements relating toCT:83

catalog management(continued)status codes PSW:326, CMW :104uncatalog datasetsPSW:223

catalog management (DC) subtaskDGR:45catalog management event (EXC) layoutDGR:123CATMCLAS keyword of JOBOPTS CT:36, PSW:209CATMDISP keyword of JOBOPTS CT:36CATMGT keyword of OPCOPTS CT:58CB (network communication function) subtaskDGR:46,

DGR:56CCUN error code PSW:325, CMW :103CD-ROM, publications on GUI :55CDATE, JCL variable PSW:271CDAY, JCL variable PSW:270CDD, JCL variable PSW:270CDDD, JCL variable PSW:270CDDMMYY, JCL variable PSW:270CDRSC statements

API IG :85NCF IG :79

change team DGR:4CHANGED MANUALLY (ONLINE) message PSW:168changing an application descriptionGUI :37changing application descriptions in batchPSW:115changing color in graphic viewsWMUG :73changing dependencies in the current planCMW :57changing dependencies in the LTPPSW:172changing error-list layoutsCMW :72changing fonts in graphic viewsWMUG :75changing group definitionsPSW:116changing occurrences added to the current planCMW :53changing operation statusPSW:38, WMUG :48changing operations in the current planGS:59, CMW :58changing operator instructionsPSW:116changing resource availabilityCMW :63, CMW :89changing resourcesCMW :93changing startup optionsT4:34changing system valuesT4:36changing the current planPSW:179, CMW :43, CMW :45changing the schedulePSW:161changing the scope of restartPSW:229changing views of Workstations List objectWMUG :71changing workstation availabilityCMW :64changing workstation detailsCMW :65CHECK keyword PSW:126checking current plan statusCMW :40checking dependenciesGS:49, CMW :38checking if a job has failedPSW:215checking JCL variable substitutionPSW:278checking occurrencesGS:46, CMW :36checking operations GS:48, CMW :38checking the APPN configuration listT4:24checking the configuration parameter fileUX:75checking the job namePSW:104checking workstation statusCMW :39

Index 9

checklist for installing IG :20checkpoint dataset (EQQCKPT)IG :62, PSW:186, DGR:29,

DGR:30, DGR:57considerations when allocatingIG :63error recovery PSW:241recovery CT:203

checkpoint file T4:45, UX:56, UX:74, UX:100, OW:29,OW:33, OW:66

CHECKSUBSYS keyword of BATCHOPT CT:17CHGNETA command T4:27CHGOPC command T4:34CHH, JCL variable PSW:270CHHMM, JCL variable PSW:270CHHMMSSX, JCL variable PSW:270CHKCLASS keyword of JCCOPTSCT:33CHSMWAIT keyword of JOBOPTS CT:37, PSW:226CICS GI :3

tracking jobs submitted byPSW:257CL record

deleting PI:14format PI:75selecting PI:45

CL-job streams T4:51class descriptor tableIG :53CLASS keyword of AUTHDEF CT:14class of service tableIG :82CLCOM segment

listing PI:28record format PI:75selecting PI:45

cleaning up log files T4:46CLEAR command PSW:116clipboard, used to copy graphic viewsWMUG :78CLIST library IG :74CLNUPOPC command T4:45, T4:46closing down online systemsPSW:106closing workstations PSW:35CLSD segment

record format PI:75CLWD segment

record format PI:76CMM, JCL variable PSW:270CMMYY, JCL variable PSW:270CODEPAGE keyword of ROUTOPTSCT:72, UX:9, OW:7codepage tablesUX:107codes PSW:323

catalog managementPSW:326, CMW :104error PSW:325, CMW :103extended status codesPSW:324, CMW :102job log retrieval PSW:327, CMW :105status codes for occurrencesPSW:323, CMW :101status codes for operationsPSW:323, CMW :101

coding JCL variables PSW:264COFDLFnn member of SYS1.PARMLIBIG :49collection kit, OPC publicationsGUI :55

color and highlight attributes for panelsCMW :10color, changing in graphic viewsWMUG :73command delimiter, specifyingCMW :11command input streamsT4:45commands

CANCEL GS:5CHGNETA T4:27CHGOPC T4:34CLNUPOPC T4:45, T4:46CPYFRMTAP T4:20CRTCTLAPPC T4:28CRTCTLHOST T4:27CRTDEVAPPC T4:25CRTMODD T4:29CRTPF T4:17, T4:20CRTSAVF T4:16CRTUSRPRF T4:30DLTF T4:22DLTLIB T4:38DSPLIB T4:22DSPLIND T4:26DSPNETA T4:27DSPOBJAUT T4:36DSPSAVF T4:23ENDOPC T4:44LOCATE GS:11MVS IG :194MVS/ESA

CANCEL PSW:320, CMW :98MODIFY PSW:320, CMW :98START PSW:319, CMW :97STOP PSW:319, CMW :97

RSTLIB T4:17, T4:19, T4:22SNDNETF T4:18, T4:21SORT GS:10STROPC T4:31STRSBS T4:43TSAVE GS:17TSO PSW:301

BACKUP IG :48event reporting CT:149OPINFO IG :48OPSTAT IG :48SRSTAT IG :48WSSTAT IG :48

utility OW:63WRKACTJOBS T4:46WRKCFGL T4:24WRKCFGSTS T4:47WRKDIR T4:16WRKJOBD T4:35WRKLIND T4:26WRKNETF T4:16, T4:18, T4:21WRKOPC T4:41WRKSYSVAL T4:36


commands, concatenatingGS:7, CMW :12commands, ISPF in dialogCMW :13comments in LTP reportsPSW:168COMMNDnn member of SYS1.PARMLIB IG :49Common Programming Interface for Communications

(CPI-C) GI :29, PI:53, PI:54, DGR:42common version and level requirementWMUG :87Communicating with Workstations menuCMW :21communication, checkingWMUG :101communication, configuring WMUG :96communications

checking UX:25checking on OS/2 OW:19checking on Windows NT OW:21

Communications Managerconfiguring GUI :39password GUI :51requirements GUI :1testing configuration GUI :52

Communications Manager passwordWMUG :104communications side information objectT4:38COMP keyword on JCL directivesPSW:294compatibility with OPC/A GI :47compatibility with OPC/ESA Release 3GI :47compatibility, software GI :55, IG :183COMPLETE status PSW:160Complete, status for operation alertsWMUG :57Complete, status for operationsWMUG :44, WMUG :46completed applications

daily planning report PSW:180, PSW:395error statistics (daily planning report)PSW:396summary of, daily planning reportPSW:394

completed/deleted application report record in DPDGR:75completing an ended-in-error operationCMW :72completing an occurrenceCMW :56completion codes PSW:213completion-only reporting attributePSW:30compound variables PSW:266computer workstations WMUG :2

alternate PSW:23, PSW:24job statements PSW:103job type PSW:23started task (STC) typePSW:24using PSW:23

concatenating commandsCMW :12CONFIG.SYS file, updating WMUG :92CONFIG.SYS update GUI :4configuration file

creating UX:50, OW:30configuration parameters

controller UX:9, OW:7Job Scheduler UX:14, OW:11

configuration statusviewing T4:47

configuration, statements relating toCT:80

configurations GI :41catalog management, descriptionIG :163, IG :166connecting TME 10 OPC systemsIG :10cross-system coupling facility (XCF)IG :11description IG :4event dataset IG :9examples

introduction IG :13, IG :149NCF connection IG :159, IG :160OPC/A Release 2 systemIG :162, IG :165shared DASD connectionIG :13, IG :150, IG :152single address spaceIG :18sysplex IG :155TME 10 OPC PLEX IG :157VTAM connection IG :15, IG :159, IG :160XCF connection IG :16, IG :155

MAS (Multi-Access Spool) restrictionsIG :12Multi-Access Spool (MAS) restrictionsIG :12NCF (network communication function)IG :11planning IG :9shared DASD IG :10VTAM IG :11workload restart

description IG :12examples IG :151, IG :153, IG :156, IG :159, IG :161,

IG :163, IG :166workstation destination IG :11XCF (cross-system coupling facility)IG :11

configuring Communications ManagerGUI :39configuring for communication WMUG :96configuring for communication, common

mistakes WMUG :103Confirm Restart of an Operation panelCMW :73confirming changes WMUG :52confirming rerun of an occurrenceGS:64connected workstationsCMW :83, CMW :95connections, SNA GUI :45considerations for creating plansPSW:160console messages

routing CT:183console operator GI :38CONTENTIONTIME keyword of RESOPTSCT:64control option

for workstation fixed resourcesPSW:37control statements for batch loaderPSW:121controlled AS/400 systemsGI :13, GI :42controlled MVS/ESA systems

TME 10 OPC GI :41controlled shutdown PSW:35controlled systems

description IG :4OPC/A GI :43software requirementsGI :51, IG :179

controlled UNIX systems GI :13, GI :42controlled workstations GI :13, GI :42

Index 11

controllercase-code-definition module (EQQCASEM)CT:11,

CT:188checking the message logIG :98description IG :4, T4:1, UX:1, OW:1exits CT:111IBMOPC resource classIG :53introduction PSW:1loading national language support (NLS) softwareIG :31loading software IG :30parameters UX:9, OW:7RACF IG :51, IG :53software requirementsGI :51, IG :179started task datasetsIG :71, IG :72tuning CT:239verifying installation IG :97

controller IP address parameterUX:54, OW:31controller port number parameterUX:54, OW:31controller subtasks DGR:40controller_ipaddr UX:54, OW:31controller_portnr UX:54, OW:31controller_type UX:54, OW:31CONTROLLERTOKEN keyword of BATCHOPT CT:17CONTROLLERTOKEN keyword of OPCOPTSCT:59controlling operations

special resourcesand LOOKAHEAD PSW:51

controlling systemdescription GI :41, IG :4recovery of GI :27

controlling workstations PSW:38conversion

from OPC/A GI :48from OPC/ESA Release 3GI :48

copying an application descriptionGUI :37copying graphic views WMUG :78copying objects WMUG :9COS table IG :82Country Settings WMUG :32COUPLEnn member of SYS1.PARMLIBIG :47CP (current plan) CMW :2

See also current planCP_OPEN_INTERVAL object

field names PI:108CP_OPER_EVENT object

field names PI:109CP_OPER_EVENT object, EQQUSINCT:157, CT:161CP_OPERATION object

field names PI:101CP_OPINFO_EVENT object

field names PI:111CP_OPINFO_EVENT object, EQQUSINCT:159, CT:163CP_RESOURCE object

field names PI:105CP_SR_EVENT object

field names PI:112

CP_SR_EVENT object, EQQUSINCT:158, CT:162CP_STATUS object

field names PI:100CP_WORK_STATION object

field names PI:106CP_WS_EVENT object

field names PI:114CP_WS_EVENT object, EQQUSINCT:160, CT:163CP1 (primary current plan)DGR:30CP2 (alternate current plan)DGR:30CPI-C (Common Programming Interface for

Communications) GI :29, PI:53, PI:54, DGR:42CPI-C information

updating T4:38CPI-C side information GUI :50CPICREXX command WMUG :101CPIVL

record format PI:85CPLREC01 (current plan record type 1) layoutDGR:78CPLREC02 (current plan record type 2) layoutDGR:80CPLREC04 (current plan record type 4) layoutDGR:83CPLREC05 (current plan record type 5) layoutDGR:86CPLREC06 (current plan record type 6) layoutDGR:87CPLREC07 (current plan record type 7) layoutDGR:88CPLREC08 (current plan record type 8) layoutDGR:89CPLREC09 (current plan record type 9) layoutDGR:90CPLREC10 (current plan record type 10) layoutDGR:90CPLREC11 (current plan record type 11) layoutDGR:91CPLREC12 (current plan record type 12) layoutDGR:91CPLREC13 (current plan record type 13) layoutDGR:92CPLREC14 (current plan record type 14) layoutDGR:96CPLREC3C (current plan record type 3C) layoutDGR:98CPLREC3P (current plan record type 3P) layoutDGR:100CPOC record

deleting PI:14format PI:76inserting PI:22listing PI:29modifying PI:33selecting PI:45

CPOP recorddeleting PI:14format PI:78inserting PI:22modifying PI:33selecting PI:46

CPOPCOM segmentlisting PI:29record format PI:78selecting PI:46

CPPRE segmentdeleting PI:14inserting PI:23record format PI:80

CPSR segmentdeleting PI:14


CPSR segment(continued)inserting PI:24record format PI:81

CPST recordformat PI:82selecting PI:44

CPSUC segmentrecord format PI:80

CPWS recordformat PI:83modifying PI:34selecting PI:46

CPWSCOM segmentlisting PI:29record format PI:83selecting PI:46

CPYFRMTAP command T4:20creating

administrator user ID UX:18directory UX:21group ID (GID) UX:18objects with templatesWMUG :9Operations List object WMUG :24, WMUG :55Plan object WMUG :11user ID UX:18Workstations List object WMUG :64

Creating a Calendar panelPSW:56Creating a Calendar Period panelPSW:59Creating a Dependency in the Current Plan panelCMW :50Creating a JCL Variable Table panelPSW:273Creating a Job panelPSW:110Creating a Ready List Layout panelCMW :24Creating a Special Resource panelPSW:47creating a user profile T4:30Creating an Application panelPSW:72Creating an Error List Layout panelCMW :71Creating an Operator Instruction panelPSW:102creating applications PSW:12, PSW:65, PSW:71creating calendarsPSW:10, PSW:55creating dependenciesGS:39, CMW :49creating error list layouts CMW :72Creating General Information about a Workstation

panel PSW:28creating intervals when resources are availablePSW:49creating job descriptionsPSW:109, PSW:110creating occurrencesGS:38creating operations PSW:87creating periods PSW:58creating plans PSW:18creating ready list layoutsCMW :23creating resources dynamicallyPSW:52creating rules PSW:74creating run cycles PSW:74creating sample JCL IG :34creating special resourcesPSW:8, PSW:43

creating temporary variablesPSW:287creating the APPC controller descriptionT4:27creating the current planGS:43, DGR:30creating the long-term planGS:35, GS:36, PSW:156,

DGR:32Creating the Long-Term Plan panelPSW:165creating the QEQQ Save fileT4:16creating workstations PSW:5, PSW:23criteria for lists GS:8, CMW :14critical path CMW :37cross reference

application descriptions PSW:380job names and active applicationsPSW:375, PSW:376

cross-domain resource definitionsAPI IG :85NCF IG :80

cross-system coupling facility (XCF)GI :26—28, GI :41,PSW:231

groups IG :78including IG :78initialization statements IG :79MVS/ESA initialization options IG :47run time options IG :79

CRTCTLAPPC command T4:28CRTCTLHOST command T4:27CRTDEVAPPC command T4:25CRTMODD command T4:29CRTPF command T4:17, T4:20CRTSAVF command T4:16CRTUSRPRF commandT4:30CSI object T4:38CTIME, JCL variable PSW:271current plan GI :23, PSW:155, PSW:175—191, CMW :2

alerts WMUG :11alerts settings WMUG :15alternate (CP2) DGR:30analyzing problems PSW:183automatic backup processPSW:189backup record DGR:55catch up PSW:190changing GS:57, PSW:184, CMW :41checking occurrencesGS:46, CMW :36checking status of WMUG :11—21creation date and timeCMW :40description of DGR:30details WMUG :19end date and timeCMW :40event-triggered tracking PSW:258execute (EX) function DGR:65extension (CX) DGR:30files currently in use CMW :40first logged event after last backupCMW :40general description GS:43, WMUG :1integrity PSW:186last backup CMW :40manual hold (MH) function DGR:64

Index 13

current plan(continued)manual release (MR) functionDGR:64NCP takeover PSW:190new (NCP) PSW:190, DGR:30, DGR:58new extension (NCX) DGR:30new plan in production CMW :40on-request BACKUP PSW:302organization PSW:186primary (CP1) DGR:30receiving alerts WMUG :16record type 1 (CPLREC01) layoutDGR:78record type 10 (CPLREC10) layoutDGR:90record type 11 (CPLREC11) layoutDGR:91record type 12 (CPLREC12) layoutDGR:91record type 13 (CPLREC13) layoutDGR:92record type 14 (CPLREC14) layoutDGR:96record type 2 (CPLREC02) layoutDGR:80record type 3C (CPLREC3C) layoutDGR:98record type 3C (CPLREC3P) layoutDGR:100record type 4 (CPLREC04) layoutDGR:83record type 5 (CPLREC05) layoutDGR:86record type 6 (CPLREC06) layoutDGR:87record type 7 (CPLREC07) layoutDGR:88record type 8 (CPLREC08) layoutDGR:89record type 9 (CPLREC09) layoutDGR:90recovery CT:194—198

from LTP CT:201from new current plan CT:202refresh function CT:201

recreating PSW:179replanning CMW :63reports PSW:180specifying several alertsWMUG :17statistics WMUG :18statistics settings WMUG :18status CMW :40trial PSW:179turnover PSW:190, DGR:30, DGR:57

current plan and status inquiryGS:45Current Plan and Status Inquiry menuPSW:185, CMW :35current plan dataset (EQQCPnDS)IG :57

considerations when allocatingIG :60current plan extension (CX)DGR:30current plan extension dataset (EQQCXDS)PSW:186,

DGR:29CURRPLAN keyword of JTOPTS CT:41Customer Engineering Program SupportDGR:4—4customer number, IBM DGR:5customers, queries fromGI :39customizing

case-code-definition module (EQQCASEM)CT:188dataset deletion utility (EQQDELDS)CT:189ended-in-error-list layout tableCT:185Hiperbatch support CT:185messages CT:183miscellaneous CT:183—189

customizing (continued)panels CT:184ready-list layout table CT:185RODM (Resource Object Data Manager)CT:186

customizing for APPC communicationsT4:24cutover IG :132, IG :133CWBASE keyword of INIT CT:29CWW, JCL variable PSW:271CWWD, JCL variable PSW:271CX (current plan extension)DGR:30cycle specification

for rules GS:28, PSW:77cyclic periods PSW:58CYMD, JCL variable PSW:271CYY, JCL variable PSW:271CYYDDD, JCL variable PSW:271CYYMM, JCL variable PSW:271CYYMMDD, JCL variable PSW:271CYYYY, JCL variable PSW:271CYYYYMM, JCL variable PSW:271

DD occurrence status codePSW:323, CMW :101D operation status codePSW:323, CMW :101D row command CMW :57, CMW :58, CMW :92daily operating plan report record in DP (DAIOP)DGR:106daily plan

report on completed applicationsPSW:180daily plan actual workstation resource reportDGR:74daily plan completed/deleted application report

record DGR:75daily plan header report record (DPH)DGR:111daily plan report record DGR:113daily plan summary of completed/deleted applications

report DGR:105daily planning PSW:175

analyzing problems PSW:183completed applications reportPSW:395error statistics on completed applicationsPSW:396missed feedback reportPSW:397new current plan processPSW:190operation in error report PSW:397reports

actual resource utilizationPSW:398general information reportPSW:388operating plan PSW:389parallel operations, daily planning reportPSW:391plan for work station PSW:390planned resource utilizationPSW:393resource 1, daily planning reportPSW:392summary of completed applications reportPSW:394workstation resource utilization reportsPSW:392workstation utilization reports PSW:391

Daily Planning dialog WMUG :7


daily planning job DGR:58daily planning report exit (EQQDPUE1)CT:146DASD keyword of ROUTOPTS CT:72data area (PIF), format ofPI:6data areas

acutal workstation resource report in DPDGR:74ADR (application description) DGR:69calendar DGR:74case code list DGR:78completed/deleted application report record in

DP DGR:75CPLREC01 (current plan record type 1)DGR:78CPLREC02 (current plan record type 2)DGR:80CPLREC04 (current plan record type 4)DGR:83CPLREC05 (current plan record type 5)DGR:86CPLREC06 (current plan record type 6)DGR:87CPLREC07 (current plan record type 7)DGR:88CPLREC08 (current plan record type 8)DGR:89CPLREC09 (current plan record type 9)DGR:90CPLREC10 (current plan record type 10)DGR:90CPLREC11 (current plan record type 11)DGR:91CPLREC12 (current plan record type 12)DGR:91CPLREC13 (current plan record type 13)DGR:92CPLREC3C (current plan record type 3C)DGR:98CPLREC3P (current plan record type 3P)DGR:100CPLREV14 (current plan record type 14)DGR:96daily operating plan report record in DP

(DAIOP) DGR:106daily plan actual workstation resource reportDGR:74daily plan completed/deleted application report

record DGR:75daily plan summary of completed/deleted applications

report DGR:105DOA (dynamic operation area)DGR:108DPH (daily plan report header record)DGR:111DPIN or DPUT (report record in DP)DGR:113DQE (data queue element)DGR:114EMP (event manager parameter area)DGR:117EPR (event dataset positions)DGR:119EQE (event queue element)DGR:121error statistics report record in DPDGR:120ESP (event split record)DGR:119ETC (ETT criteria record) DGR:121EVT (event and SUBREL dataset record)DGR:122EXC (catalog management event)DGR:123EXE (backup event) DGR:126EXH (backup event) DGR:126EXI (initialization event) DGR:127EXJ (job-log-retrieval event) DGR:129EXO (on/off line event) DGR:130EXR (exit record) DGR:131EXS (resource event)DGR:133EXSA (resource event extension)DGR:133EXT (ready to receive event)DGR:134EXU (user event record)DGR:135EXW (workstation status event)DGR:135

data areas(continued)EXX (Tracker Agent event record)DGR:136ID (Tracker identification record) DGR:137JCLREC (fixed part of JCL record)DGR:140JSLOG (job-log record in EQQxJSDS)DGR:141JV (JCL variable table) DGR:142LTP (long-term plan) DGR:144MCA (main communication area)DGR:147MFB (missed feedback record in DP)DGR:151MT0 track information entry DGR:156MTD track information DGR:152NJE (JES NJE record)DGR:160NMM (normal mode manager parameters)DGR:161NNN (node name record)DGR:161OPC (status record)DGR:165OPERR (Ops in error report record in DP)DGR:165OPI (operator instruction) DGR:168OPT (subsystem options)DGR:169PER (period layout) DGR:173REL (job release record)DGR:173RSR (special resource record)DGR:174RSRR (special resource report record)DGR:179SSX (subsystem communication vector table

extension) DGR:180summary of completed/deleted applications report in

DP DGR:105TOC (table of contents for DP report)DGR:183TRL (job-tracking and audit record)DGR:184WAP (workstation analyzer parameters)DGR:191WQA (workstation queue area)DGR:192WSD (workstation description record)DGR:194WSN (workstation resource report record in

DP) DGR:197WSP (workstation plan report record in DP)DGR:198

Data Facility Hierarchical Storage Manager (DFSHM)GI :3data lookaside facility (DLF) IG :49, CT:185, PSW:53data queue element (DQE)DGR:114data router (DX) subtaskDGR:47data security CT:98data, things to check for if not receivingWMUG :109database

application description PSW:120, DGR:28calendar DGR:28job descriptions DGR:28operator instruction PSW:120, DGR:28period DGR:29side information DGR:29special resourcesDGR:29variable table DGR:29workstation DGR:29

Database dialog WMUG :7databases WMUG :2databases, migratingIG :127, IG :131, IG :132dataset backup and recoveryCT:193—206dataset on MVS GUI :2

Index 15

dataset triggering PSW:54implementing IG :50

dataset triggering selection table macro (EQQLSENT)invoking IG :173syntax IG :173

datasetsallocating IG :56—69

non-VSAM IG :61—69VSAM IG :57

considerations when allocatingapplication description (EQQADDS)IG :60automatic-recovery-procedure library

(EQQPRLIB) IG :68checkpoint (EQQCKPT) IG :63current plan (EQQCPnDS)IG :60diagnostic (EQQDUMP) IG :64diagnostic message and trace (EQQDMSG)IG :64dual job-tracking log (EQQDLnn) IG :67dump (SYSMDUMP) IG :64event (EQQEVDS) IG :64general IG :56JCC incident log IG :66JCC incident work (EQQINCWK) IG :67JCC message table (EQQJCLIB)IG :66JCL repository (EQQJSnDS)IG :61job library (EQQJBLIB) IG :66job-tracking archive (EQQJTARC)IG :67job-tracking log (EQQJTnn) IG :67message log (EQQMLOG)IG :68parameter library (EQQPARM) IG :68PIF parameter dataset (EQQYPARM)IG :68started-task submit (EQQSTC)IG :69submit/release (EQQSUDS)IG :69

EQQAD2DS PSW:149EQQADDS PSW:149EQQDUMP PSW:149EQQJBLIB PSW:200EQQMLIB PSW:149EQQMLOG PSW:149EQQOIDS PSW:149EQQOIPDS PSW:149EQQSTC PSW:200EQQWSDS PSW:149for long-term plan PSW:164in TME 10 OPC procedure JCL

optional IG :72required IG :71

ISPF profile IG :74JCL repository (EQQJSnDS)PSW:200migrating IG :127, IG :131, IG :132security IG :52SYSUDUMP PSW:149TME 10 OPC dialog IG :76

datespecifying format GS:6, CMW :8

Date fields, influenced by Country SettingsWMUG :32date formats in TME 10 OPCDGR:68date-related supplied variablesPSW:270date, internal CT:32DATEFORM keyword of BATCHOPT CT:17DAY keyword PSW:134day specification

for rules GS:28, PSW:77day status PSW:56DB2 CMW :59DB2 database

creating IG :74using PSW:211

DB2 tablesEQQHI13 DGR:201EQQHI14 DGR:202EQQHI3C DGR:202EQQHI3P DGR:203EQQHIMN DGR:201

DB2AVAIL keyword of BATCHOPT CT:17DB2SYSTEM keyword of BATCHOPT CT:17DB2SYSTEM keyword of OPCOPTSCT:59DBCS (double-byte character set)CMW :15

and job descriptions PSW:66, PSW:110DBCSOPTS initialization statementCT:22

APPLID keyword CT:23example of CT:23OWNERID keyword CT:23SORTORDER keyword CT:23

DC (catalog management) subtaskDGR:45ddnames being usedCMW :40deactivating automatic recoveryPSW:252deactivating event-triggered tracking (ETT)PSW:256deactivating job submissionPSW:193deactivating variable substitutionPSW:264, PSW:281deadline WMUG :3

specifying GS:26, PSW:76DEADLINE - START > 24 HRS messagePSW:168deadline date CMW :46DEADLINE WTO option PSW:98deallocating a resourceCMW :89DEC Open/VMS


DEC Open/VMS requirements, hardware andsoftware UX:117

DECEMBER keyword PSW:134default calendar PSW:10, CMW :10default date PI:8default installation directory GUI :4default time for an operationPSW:33defining a subsystemT4:31defining applications PSW:12, PSW:65, PSW:71defining calendars PSW:10, PSW:55Defining Dependencies in the Current Plan panelCMW :51


defining ETT criteria PSW:256defining JCL variable tablesPSW:60defining job descriptions PSW:109defining local LU T4:13defining operations PSW:87defining periods PSW:58defining predecessorsPSW:88defining reporting attributesPSW:29defining resource usagePSW:92defining rules PSW:74defining run cycles PSW:74defining SNA resourcesT4:12defining special resourcesPSW:8, PSW:43defining subsystem nameT4:32defining workstations PSW:5, PSW:23deinstallation GUI :8delaying operations CMW :31delays CMW :34DELETE command WMUG :47DELETE request (PIF) PI:11Deleted, status for operationsWMUG :44deleting a subsystemT4:38deleting an application descriptionGUI :37deleting completed occurrences from the LTPPSW:156deleting datasets

for job recovery PSW:223deleting dependenciesCMW :49deleting log files T4:46deleting occurrencesCMW :57deleting operations CMW :59DEP primary command CMW :57dependencies PSW:68, WMUG :3

adding CMW :49changing CMW :57changing in the LTP PSW:172checking GS:49, CMW :38defining GI :16displaying graphically

with GRAPH command CMW :13graphic display of GI :18in AD database PSW:120in the long-term plan PSW:165long-term plan default PSW:170resolving PSW:91, PSW:182specifying PSW:88, CMW :48

dependencies, creatingGUI :31DEPENDENCY CHANGED messagePSW:168dependency loop PSW:183dependency resolution with ETTPSW:256dependent variablePSW:275DESCR keyword PSW:131, PSW:138, PSW:144deselecting WMUG :29DESTID keyword of ROUTOPTS CT:72DESTINATION keyword of RODMOPTS CT:68destination name, symbolic

associating with a workspaceGUI :10

destination name, symbolic(continued)setting in Communications ManagerGUI :50

destination of workstationsPSW:32DETAILS command PSW:110Details view

Operations List object WMUG :39Plan object WMUG :19

General page WMUG :16specifying settings WMUG :18using WMUG :18

Workstations List object WMUG :80details view, list GUI :17details, application GUI :24determining the success or failure of a jobPSW:215

statements relating toCT:82deviation CMW :90

changing CMW :93of special resourcesPSW:39, PSW:314

DFHSM PSW:226DFHSM (Data Facility Hierarchical Storage Manager)GI :3diagnosing problems UX:71, OW:45diagnostic dataset

EQQDMSG IG :62, IG :64EQQDUMP IG :62, IG :64, IG :82, PI:2SYSMDUMP IG :46, IG :62, IG :64

dialogaccess to CT:102choosing Workload Monitor/2 or ISPFWMUG :7commands, ISPF in dialogCMW :13description IG :7entering IG :76EQQMINOR, authorizing IG :48GUI DGR:27initializing IG :74introduction GS:5, CMW :7ISPF DGR:25ISPF command tableIG :75main menu, panel EQQOPCAPCMW :7modify current plan GS:57, CMW :41options, setting GS:5, CMW :8overview GS:5, CMW :7parameters, settingGS:5, CMW :8problem determination proceduresIG :100query current plan GS:45, CMW :35Ready List CMW :21security IG :54, CT:102workload monitor/2 DGR:27

differences in translated versionsprinted page WMUG :83RECEIVE command WMUG :89screen display WMUG :9

directives in JCL PSW:283directories UX:21directory structure UX:21, UX:59, OW:27, OW:28directory, installation GUI :4

Index 17

disabling variable substitutionPSW:264, PSW:281disaster recovery planning (DRP)CT:207—215

designing a plan CT:207—209environment considerationsCT:208secondary-center optionsCT:207

implementing recovery CT:209—215point-of-failure CT:213predefined point CT:211start-of-day CT:209

discarding actions CMW :79disk requirements GUI :1dispatching priority IG :49display requirements GUI :1displaying List view WMUG :35displaying object authority T4:36displaying the APPC line descriptionT4:26displaying the trace log T4:50displaying the tracker files T4:44displaying workstations WMUG :68distribution media UX:3, OW:2distribution tape IG :7, T4:3DLDAY keyword PSW:131DLF (data lookaside facility) IG :49, CT:185, PSW:53DLTF command T4:22DLTIME keyword PSW:131DLTLIB command T4:38DNS server OW:15DOC (documentation) keywordDGR:12documentation

APAR box DGR:8DOC keyword DGR:12for APAR DGR:7general DGR:8mailing DGR:8sending to change teamDGR:8sending via a communications linkDGR:8

double-byte character set (DBCS)CMW :15and job descriptions PSW:66, PSW:110

downloading the file from tapeT4:19downloading the GUI GUI :2downloading the installation programWMUG :88downloading the OS/400 Tracker

from tape T4:19using FTP T4:17using NJE T4:16

DPALG keyword of BATCHOPT CT:17DPH (daily plan header) report recordDGR:111DPIN (daily planner) report record in DPDGR:113DPROUT keyword of BATCHOPT CT:18DPUT (daily planner) report record in DPDGR:113DQE (data queue element)DGR:114DRP

Seedisaster recovery planning (DRP)DSNAME value in variable validationPSW:278DSPLIB command T4:22

DSPLIND command T4:26DSPNETA command T4:27DSPOBJAUT command T4:36DSPSAVF command T4:23dual job-tracking-log dataset (EQQDLnn)PSW:186DUAL keyword of JTOPTS CT:41dummy application CMW :44dummy operation PSW:27dummy workstation PSW:27dump content definitions IG :46dump dataset (SYSMDUMP)IG :46, IG :62, IG :64, DGR:16duplicate occurrencesPSW:165duration GS:17, PSW:33

feedback PSW:99DURATION keyword PSW:138duration per workstation reportPSW:387DX (data router) subtaskDGR:47dynamic dataset allocationPSW:227dynamic exits (PROGnn) IG :44, IG :45dynamic inclusion of JCL PSW:261dynamic operation area (DOA)DGR:108dynamic resource creationPSW:52dynamic-format supplied variablesPSW:271, PSW:285DYNAMICADD keyword of BATCHOPT CT:18, PSW:52DYNAMICADD keyword of RESOPTS CT:64, PSW:52

EE extended status codePSW:324, CMW :102E occurrence status codePSW:323, CMW :101E operation status codePSW:323, CMW :101EBCDIC PI:54ECB list DGR:42, DGR:43ECSA (extended common service area)IG :42Editing JCL for an MVS Job panelPSW:221, CMW :78,

CMW :80editing JCL for an operationGS:55, CMW :28Editing JCL for an Operation panelCMW :28, CMW :30editing JCL variable tablesPSW:273EIADAYS keyword PSW:131EM (event manager) subtaskDGR:48embedded blanks in JCL variablesPSW:282

with COMP keyword PSW:295EMR (event manager parameter area)DGR:117enabler support

loading for the OS/400 TrackerT4:7loading for the Tracker AgentUX:7, OW:6

enabling JCL variable substitutionPSW:264END command PSW:25END JCL directive PSW:290end time

of a work day PSW:57end users, queries fromGI :39ended-in-error list

layout CMW :70sample to view output CT:268


ended-in-error operationsGS:61, PSW:214, CMW :69ended-in-error statusCMW :27ended-in-error-list layout tableIG :75, CT:185ending the OS/400 TrackerT4:44ENDNET file WMUG :98ENDNONET file WMUG :98ENDOPC command T4:44ENDSDLC file WMUG :98ENDTIME keyword of AROPTS CT:10, PSW:239ENTERED MANUALLY (ONLINE) message PSW:168Enterprise Performance Data Manager (EPDM)GI :3entry-point tracker

description T4:11subsystem definition T4:32

ENUM value in variable validation PSW:278environment variable

EQQHOME UX:50, OW:30EQQINSTANCE UX:50, OW:30PATH UX:50, OW:30

EPDM (Enterprise Performance Data Manager)GI :3EPR (event dataset positions) layoutDGR:119EQE (event queue element) layoutDGR:121EQQ4LOG T4:45, T4:54EQQA4TOP DGR:39EQQACGPP panel PSW:72EQQACMDS DGR:26EQQAD2DS dataset PSW:149EQQADCOP DGR:33EQQADCOP batch programPSW:332EQQADDEP DGR:33EQQADDEP batch programPSW:333EQQADDS DGR:28EQQADDS (application description dataset)IG :57,

PSW:149considerations when allocatingIG :60recovery CT:199

EQQADMUP DGR:33EQQADMUP batch program PSW:334EQQADPRT DGR:33EQQADPRT batch programPSW:335EQQADXRF DGR:33EQQADXRF batch program PSW:337EQQAMFBP panel PSW:99EQQAMJBP panel PSW:95EQQAMODE panel PSW:102EQQAMOPL panel PSW:87EQQAMOSL panel PSW:89EQQAMPDL panel PSW:91EQQAMRNL panel PSW:81EQQAMRPL panel PSW:76EQQAMSDP panel PSW:90, PSW:113EQQAMSRL panel PSW:92EQQAMTMP panel PSW:101EQQAMWRP panel PSW:94EQQARTOP DGR:40

EQQAUFIP panel PSW:118EQQAUPDL panel PSW:116EQQAUUGL panel PSW:117EQQAXMDL DGR:26EQQAXR00 DGR:33EQQAXR00 batch programPSW:338EQQBATCH DGR:33EQQBATCH program PSW:329EQQBRDS (internal reader dataset)IG :63EQQCASEC (case-code-list definition macro)CT:11,

CT:188, CT:255, PSW:251, DGR:45EQQCASEM (case-code-definition module)CT:11, CT:188EQQCBTOP DGR:39EQQCKPT T4:45EQQCKPT (checkpoint dataset)IG :62, PSW:186, DGR:29

considerations when allocatingIG :63recovery CT:203

eqqclean script UX:69EQQCLPRC batch programPSW:339EQQCLPRP DGR:33EQQCLPRP batch programPSW:340EQQCLPRT DGR:33EQQCP1DS (primary current plan dataset)PSW:186,

DGR:29recovery CT:194—198

from LTP CT:201from new current plan CT:202

EQQCP2DS (alternate current plan dataset)PSW:186,DGR:29

recovery CT:194—198from LTP CT:201from new current plan CT:202

EQQCPnDS (current plan dataset)IG :57considerations when allocatingIG :60

EQQCXDS (current plan extension dataset)PSW:186,DGR:29

recovery CT:194—198from new current plan CT:202

EQQDCTOP DGR:39EQQDELDS (deleting datasets)

sample CT:270eqqdelete script UX:68EQQDFLT.LYT file GUI :19EQQDLFX exit sample PSW:53EQQDLnn (dual job-tracking-log dataset)IG :62, PSW:186


EQQDMSG (diagnostic message and trace dataset)IG :62considerations when allocatingIG :64

EQQDNTOP DGR:33EQQDNTOP batch programPSW:341EQQDOTOP DGR:33EQQDOTOP batch programPSW:344EQQDPCOP DGR:33EQQDPLNP panel PSW:177

Index 19

EQQDPUE1 (daily planning report exit)CT:146eqqdr_retry UX:54, OW:31EQQDRTOP DGR:33EQQDRTOP batch programPSW:346EQQDTTOP DGR:33EQQDTTOP batch programPSW:348EQQDUMP (diagnostic dataset)IG :62, IG :82, PSW:149,

DGR:8, DGR:16, DGR:20considerations when allocatingIG :64

EQQDUMP dataset PI:2EQQDXTOP DGR:39EQQELDEF DGR:26EQQELDEF member CMW :72EQQELOUT member CMW :72EQQELYCL panel CMW :71EQQELYLL panel CMW :71EQQEMTOP DGR:40EQQERTOP DGR:39EQQEVDnn (event dataset for an event reader)IG :62

calculating optimum LRECL IG :65considerations when allocatingIG :64

EQQEVDS (event dataset)IG :62, DGR:29calculating optimum LRECL IG :65considerations when allocatingIG :64recovery CT:204

EQQEVENT T4:45, T4:54EQQEVERT DGR:26EQQEVPGM DGR:33EQQEVPGM batch programPSW:301, PSW:350

changing operation statusPSW:25, PSW:38in event-triggered trackingPSW:255

EQQEWTOP DGR:39EQQEXIT DGR:35EQQEXIT (event-tracking-code generation macro)

in JES exits IG :40, IG :169in SMF exits IG :40, IG :169invoking IG :169syntax IG :170

EQQEXTOP DGR:40eqqfilespace UX:54, OW:31EQQGJCCT (JCC general message table)CT:174EQQGSBEX DGR:40EQQGSTOP DGR:40EQQHI13 DB2 table DGR:201EQQHI14 DB2 table DGR:202EQQHI3C DB2 table DGR:202EQQHI3P DB2 table DGR:203EQQHIMN DB2 table DGR:201EQQHIPUP panel CMW :61EQQHISTL panel CMW :60EQQHOME variable UX:50, OW:30EQQICTOP DGR:33EQQINCWK (JCC incident work dataset)IG :62

considerations when allocatingIG :67eqqinit UX:101

EQQINITA IG :42, DGR:34EQQINSTANCE variable UX:50, OW:30EQQJBLIB (job library dataset) IG :62, PSW:12, PSW:103,

PSW:200, PSW:249considerations when allocatingIG :66

EQQJCCT (JCC message-table macro)CT:176, CT:255creating a general message table, exampleCT:180examples of coding CT:177how to use CT:176

EQQJCGPP panelPSW:110EQQJCLIB (JCC message table dataset)IG :62, CT:174

considerations when allocatingIG :66EQQJCTOP DGR:39EQQJLTOP DGR:40EQQJMTCL panel PSW:256EQQJOBS installation aid

creating sample JCL IG :34description IG :33generating TME 10 OPC batch-job skeletonsIG :37setting up IG :33

EQQJS1DS DGR:29, DGR:31EQQJS2DS DGR:29, DGR:31EQQJSnDS (JCL repository dataset)IG :57, PSW:12,

PSW:103, PSW:172considerations when allocatingIG :61recovery CT:200

EQQJSUBP panel PSW:109EQQJTARC (job-tracking-archive dataset)IG :62, PSW:186,

DGR:29, DGR:31, DGR:55considerations when allocatingIG :67recovery CT:203

EQQJTnn (job-tracking-log dataset)IG :62, PSW:186considerations when allocatingIG :67recovery CT:202

EQQJVDVL panel PSW:275EQQJVMAP menu PSW:272EQQJVPRT DGR:33EQQJVPRT batch programPSW:351EQQJVTML panel PSW:273EQQJVVCL panel PSW:273EQQJVVEP panel PSW:278EQQJVVMP panel PSW:274EQQLBATP panel PSW:164EQQLBDWP panel PSW:170EQQLCDPL panel PSW:173EQQLCHGP panel PSW:173EQQLCREP panel PSW:165EQQLDDS (long-term plan work dataset)IG :57, PSW:164EQQLEXTP panel PSW:166EQQLPRAP panel PSW:167EQQLSENT (dataset triggering selection table macro)

invoking IG :173syntax IG :173

EQQLSTAP panel PSW:170EQQLSTOL panel PSW:172


EQQLTBKP (long-term-plan backup dataset)IG :57,PSW:164

use in recovery CT:194, CT:200EQQLTCRE DGR:33EQQLTCRE batch programPSW:352EQQLTDS (long-term plan dataset)IG :57, PSW:164

recovery CT:200EQQLTEXP panel PSW:169EQQLTMOA DGR:33EQQLTMOA batch program PSW:353EQQLTMOO DGR:33EQQLTMOO batch program PSW:356EQQLTOPP panel PSW:163EQQLTPRT DGR:33EQQLTPRT batch programPSW:357EQQLTTRY DGR:33EQQLTTRY batch program PSW:359EQQLUDEF DGR:26EQQMAADL panel CMW :46EQQMAAGL panel CMW :52EQQMADDP panel CMW :45EQQMAJOR DGR:36, DGR:39EQQMAMOL panel CMW :53EQQMAOCP panel CMW :46EQQMCMDL panel CMW :80EQQMEP1L panel CMW :69EQQMERRP panel CMW :70EQQMERSL panel PSW:217, CMW :74EQQMERTP panel CMW :73EQQMINOR, authorizing for TSO IG :48EQQMJCLE panel PSW:221, CMW :78, CMW :80EQQMLIB dataset PSW:149, PI:2EQQMLOG

checking at the controller IG :98checking at the serverIG :99

EQQMLOG (message log dataset)IG :62, PSW:149, PI:2,DGR:8, DGR:20

considerations when allocatingIG :68EQQMMADP panel CMW :50EQQMMDLL panel CMW :51EQQMMODP panel CMW :50EQQMMOPL panel CMW :49EQQMOCLL panel CMW :54EQQMOPRL panel CMW :59EQQMOSTL panel CMW :56EQQMROCL panel CMW :55eqqmsgq UX:54, OW:31EQQMTOPP menu CMW :43EQQMTOPP panel PSW:184EQQMWSOL panel CMW :67EQQMWSRP panel CMW :65EQQMWSVP panel CMW :66EQQNCPDS (new current plan dataset)IG :57, PSW:186,

DGR:29recovery

from LTP CT:201

EQQNCPDS (new current plan dataset)(continued)use in recovery CT:194—198, CT:202

EQQNCXDS (new current plan extension dataset)IG :58,PSW:186, DGR:29

recoveryfrom LTP CT:201

use in recovery CT:194—198, CT:202EQQNMTOP DGR:40EQQODBSP menu PSW:46EQQOIBAT DGR:33EQQOIBAT batch program PSW:361EQQOIBLK DGR:33EQQOIBLK batch program PSW:362EQQOIDS (operator instruction dataset)IG :58, PSW:149

recovery CT:199EQQOIPDS datasetPSW:149EQQPARM (parameter library) IG :62

considerations when allocatingIG :68creating the statementsCT:3identifying related statementsCT:79

auditing CT:81automatic job recovery CT:84catalog managementCT:83configuration CT:80determining success or failure of a jobCT:82output processing CT:87performance CT:85recovery CT:83reporting CT:86RODM CT:86security CT:80workload restart CT:84

overview CT:4selecting statementsCT:4storing the statementsCT:4

EQQPDLF DGR:33EQQPHAPP DGR:41EQQPHTOP DGR:41EQQPPTOP DGR:39EQQPRLIB (automatic-recovery-procedure library)IG :62

considerations when allocatingIG :68EQQPURGE DGR:33EQQPURGE batch programPSW:365EQQQ515W special resource contention messageCT:64EQQQDCRP panel PSW:47EQQQDIML panel PSW:48, CMW :94EQQQDLSL panel PSW:46EQQQDTOP menu PSW:46EQQQDWML panel PSW:49, CMW :95EQQQMIML panel CMW :91EQQQMLSL panel CMW :90EQQQMMOP panel CMW :93EQQQMSEP panel CMW :89EQQQMWML panel CMW :92EQQRCSIM DGR:34

Index 21

EQQRCSIM batch programPSW:368EQQRCSIM procedure CMW :76EQQRDDS DGR:28EQQRDDS (resource description dataset)IG :58

recovery CT:199EQQRJCLE panel CMW :28, CMW :30EQQRLDEF DGR:26EQQRLOUT DGR:26EQQRLRLM panel CMW :25EQQRLVAL panel CMW :29EQQRLYCL panel CMW :24EQQRLYLL panel CMW :23EQQRMTOP DGR:39EQQROUTER (focal-point communications router)T4:53EQQRSRLP panel CMW :22EQQRTOPP panel CMW :21EQQRULEP panel PSW:77EQQRULSL panel PSW:78EQQSAOSP panel CMW :36EQQSERVR DGR:41EQQSGCPP panelCMW :40eqqshell UX:54eqqshmkey UX:54, OW:31EQQSIDS (side information dataset)IG :58, PSW:186,

DGR:29recovery CT:200

EQQSJCLB panel CMW :75EQQSMC1P panel CMW :37EQQSOPSP panelCMW :34, CMW :38EQQSPG1L panel CMW :38EQQSSCMA DGR:34EQQSTC (started-task-submit dataset)IG :62, PSW:24,

PSW:200considerations when allocatingIG :69

EQQSTOPP panel PSW:185, CMW :35EQQSUBMIT (submittor task) T4:54EQQSUDS (submit/release dataset)IG :10, IG :62


EQQSUTOP DGR:39EQQSWAUP program CMW :76EQQSWSSP panelCMW :39EQQTATOP DGR:39EQQTCCAL panel PSW:56EQQTCRPL panel PSW:59EQQTPERL panel PSW:59eqqtr_retry UX:54, OW:31EQQTRACE T4:45, T4:50EQQTROUT (tracklog dataset)IG :68, PSW:182, DGR:31,

DGR:55eqqtw_retry UX:54, OW:31EQQUSIN subroutine CT:151—164, PSW:203, PSW:255,

CMW :64, DGR:52APP buffer section CT:152APPDAT buffer section CT:157APPFLD buffer section CT:156

EQQUSIN subroutine(continued)APPOBJ buffer section CT:153APPSEL buffer section CT:155APPVAL buffer section CT:156buffer sections CT:151changing operation statusPSW:25, PSW:38reason codes CT:164return codes CT:164samples of CT:258selecting objects


updating objectsCP_OPER_EVENT CT:161CP_OPINFO_EVENT CT:163CP_SR_EVENT CT:162CP_WS_EVENT CT:163

EQQUSINB subroutine CT:165, PSW:203, DGR:52EQQUSINO subroutine CT:166, PSW:203, DGR:52EQQUSINS subroutine CT:167, PSW:203, DGR:52EQQUSINT subroutine CT:168, PSW:203, DGR:52

changing operation statusPSW:308EQQUSINW subroutine CT:170, PSW:203, DGR:52EQQUTOPP menu PSW:193EQQUX000 (start/stop exit) CT:112

sample of CT:259EQQUX001 (job-submit exit) CT:113

sample of CT:259EQQUX002 (job library read exit) PSW:249EQQUX002 (job-library-read exit) CT:115

sample of CT:259EQQUX003 (application-description-feedback exit)CT:118EQQUX004 (event filtering exit) PSW:224, DGR:47EQQUX004 (event-filtering exit) CT:120, CT:175

sample of CT:260EQQUX005 (SYSOUT archiving exit) CT:122

sample of CT:260EQQUX006 (incident-record-create exit)CT:124, CT:176

sample of CT:260EQQUX007 (operation-status-change exit)

interface to Information/ManagementCT:126interface to NetView CT:126sample of CT:261

EQQUX008 (pre-catalog-management exit)CT:129,PSW:224, DGR:47

EQQUX009 (Operation-initiation exit) CT:132heterogeneous systems, controllingCT:219sample of CT:261

EQQUX010 (Job-log-retrieval exit)CT:134, DGR:47sample of CT:262

eqqverify UX:75EQQWATOP DGR:40


EQQWCGEP panel PSW:28EQQWMACL panel PSW:36EQQWMATL panel PSW:34EQQWMAVL panel PSW:33EQQWMLSL panel PSW:28EQQWMOTL panel PSW:33EQQWMREP panel PSW:37EQQWRITER (event writer task)T4:54EQQWSDS DGR:28EQQWSDS (workstation and calendar dataset)IG :58,

PSW:149recovery CT:199

EQQWSPRT DGR:33EQQWSPRT batch programPSW:369EQQXSUBP panel PSW:119, CMW :19EQQXVART DGR:26EQQYCOM subroutine (PIF) PI:1, PI:69EQQYLTOP DGR:33EQQYLTOP batch programPSW:369EQQYLTOP program PSW:148EQQYPARM PI:8EQQYPARM (parameter dataset)PI:2

considerations when allocatingIG :68EQQYPARM (parameter library CT:4EQQYPARM (PIF parameter dataset)IG :62EQQYTOPX DGR:33ER (event reader) subtaskDGR:50ERDROPTS initialization statementCT:23

ERSEQNO keyword CT:24ERWAIT keyword CT:24example of CT:24RELDDNAME keyword CT:24

ERDRPARM keyword of OPCOPTSCT:59ERDRTASK keyword of OPCOPTSCT:59ERROR CODE = xxxx messagePSW:168error codes PSW:325, CMW :103

catalog managementPSW:326, CMW :104from completion codes PSW:213job log retrieval PSW:327, CMW :105set by TME 10 OPC PSW:213specifying CMW :47treating as normal completion codesCT:31, CT:45,

CT:54error list GS:61, CMW :69error messagesWMUG :53

application programming interfacePI:65batch loader PSW:150generated in long-term plan reportsPSW:168program interface PI:2

error statistics on completed applicationsPSW:180,PSW:396

error statistics report record in DPDGR:120ERROR TRACKING option PSW:96Error, status for operation alertsWMUG :57Error, status for operationsWMUG :44, WMUG :47

errors from jobs UX:65, OW:42errors in variable substitutionPSW:280errors, debugging UX:71ERRRES keyword of JTOPTSCT:42, PSW:215ERSEQNO keyword of ERDROPTSCT:24ERWAIT keyword of ERDROPTS CT:24ESP (event split record) layoutDGR:119estimated duration WMUG :3, WMUG :63

feedback PSW:99ETC (ETT criteria record) layoutDGR:121ETT criteria record (ETC) layoutDGR:121ETT dialog PSW:256ETT keyword of JTOPTS CT:42, PSW:195, PSW:256ETT record

deleting PI:14selecting PI:46

ETT segmentlisting PI:30selecting PI:46

ETTRCY1 period IG :129, IG :136ETTRCY1 period use by ETTPSW:259event and SUBREL dataset record (EVT) layoutDGR:122event control block (ECB) DGR:42event dataset

description IG :9for an event reader (EQQEVDnn)IG :62for an event writer (EQQEVDS) IG :62for submit checkpointing IG :9, IG :62recovery CT:204time zones PSW:205verify IG :94

event dataset positions (EPR) layoutDGR:119event datasetsDGR:30event log file T4:45, T4:54event logfile UX:54, UX:55, UX:74, UX:100, OW:29,

OW:45, OW:66event manager (EM) subtaskDGR:48event manager parameter area (EMP)DGR:117event queue element (EQE) layoutDGR:121event reader (ER) subtaskDGR:50event reporting CT:149—172

broadcasting CT:157—172description CT:149heterogeneous systems, controllingCT:220subroutines

EQQUSIN CT:151EQQUSINB CT:165EQQUSINO CT:166EQQUSINS CT:167EQQUSINT CT:168EQQUSINW CT:170general information CT:150

TSO commandsdescription CT:149

VM, controlling CT:221

Index 23

event split record (ESP) layoutDGR:119event types IG :93event writer

using with event reader functionIG :19event writer (EW) subtaskDGR:50event writer task (EQQWRITER)T4:54event-filtering exit (EQQUX004) CT:120event-tracking-code generation macro (EQQEXIT)

in JES exits IG :40, IG :169in SMF exits IG :40, IG :169invoking IG :169syntax IG :170

event-triggered tracking (ETT)PSW:255—260activating PSW:195adding an occurrence to the current planPSW:258and the SUBMIT option CT:51deactivating PSW:195period ETTRCY1 PSW:259

event_logsize UX:54, OW:31events DGR:48

how they are generatedPSW:203triggered by availability changesPSW:54

events, broadcastingPI:64, PI:110EVERY

in rules GS:28, PSW:77EVERY keyword PSW:133EVT (event and SUBREL dataset record) layoutDGR:122EW (event writer) subtaskDGR:50ew_check_file UX:54, OW:31EWSEQNO keyword of EWTROPTSCT:25EWTROPTS initialization statementCT:24

EWSEQNO keyword CT:25, DGR:50EWWAIT keyword CT:25example of CT:28HOLDJOB DGR:49HOLDJOB keyword CT:25PRINTEVENTS keyword CT:27RETCODE keyword CT:27, PSW:213, PSW:215SKIPDATE keyword CT:27SKIPTIME keyword CT:27STEPEVENTS keyword CT:27, PSW:215SUREL keyword CT:27

EWTRPARM keyword of OPCOPTSCT:59EWTRTASK keyword of OPCOPTSCT:59EWWAIT keyword of EWTROPTS CT:25EX (external router) subtaskDGR:53EX command CMW :59example of batch loader statementsPSW:122examples of job recoveryPSW:243EXC (catalog management event) layoutDGR:123EXCLUDECC keyword of AROPTS CT:11EXCLUDERC keyword of AROPTS CT:11excluding applications CMW :52excluding JCL PSW:283exclusion rule PSW:76

EXE (backup event) layoutDGR:126EXE file, GUI GUI :2EXECUTE command PSW:198, CMW :33, WMUG :47EXECUTE request (PIF) PI:17

updating the current planPI:6, PI:17EXH (backup event) layout DGR:126EXI (initialization event) layout DGR:127exit codes UX:72exit record (EXR) layout DGR:131exits

application description feedback (EQQUX003)CT:118automatic job recovery CT:144daily planning report CT:146event filtering (EQQUX004) CT:120, CT:175event tracking IG :40incident record create (EQQUX006)CT:124, CT:176JCL imbed CT:140JCL variable substitution CT:142job library read (EQQUX002) CT:115job submit (EQQUX001) CT:113Job-log-retrieval exit (EQQUX010)CT:134Job-Tracking log write CT:138operation status change (EQQUX007)CT:126Operation-initiation exit (EQQUX009) CT:132

heterogeneous systems, controllingCT:219pre-catalog-management (EQQUX008)CT:129sample CT:259start/stop (EQQUX000) CT:112SYSOUT archiving (EQQUX005) CT:122

exits for catalog managementPSW:224EXITS initialization statement CT:28, DGR:66

CALLnn keyword CT:28example of CT:29LOADnn keyword CT:28

EXJ (job-log-retrieval event) DGR:129EXO (on/off line event) layout DGR:130exporting graphic views WMUG :78EXR (exit record) layout DGR:131EXS (resource event) layoutDGR:133EXSA (resource event extension) layoutDGR:133EXT (ready to receive event) layoutDGR:134extended common service area (ECSA)IG :42extended status codesPSW:324, CMW :102extending plans CMW :2extending the current planPSW:178extending the long-term planPSW:166Extending the Long-Term Plan panelPSW:166external dependenciesPSW:68, PSW:88, WMUG :3external dependencies in the LTPPSW:165external predecessorsGS:32

resolving PSW:91external router (EX) subtaskDGR:53EXU (user event record) layoutDGR:135EXW (workstation status event) layoutDGR:135EXX (Tracker Agent event record) layoutDGR:136


Ffailed job recovery PSW:20failed jobs

planning PSW:207FAILED workstation status CMW :64failure or success of a jobPSW:215failures and problemsUX:71fallback IG :135fast path GS:7, GS:8, CMW :12, CMW :14, CMW :43features, SNA GUI :48FEBRUARY keyword PSW:134feedback algorithms

limit for feedback PSW:101smoothing factor CT:48, PSW:100

feedback options PSW:99Feedback Options panelPSW:99feedback report PSW:182feedback, missed (daily planning report)PSW:397FETCH JCL directive PSW:293fields

choosing for Operations List objectWMUG :28choosing for Workstations List objectWMUG :66limitations for graphic views of Workstations List

object WMUG :67ordering in Operations List objectWMUG :28

fields in graphic views of Workstations Listobject WMUG :71

Fields pageOperations List object WMUG :26Workstations List object WMUG :66

FILE keyword of AUDIT CT:13files

planning UX:21Tracker Agent OW:28

files currently in use CMW :40filter characters GS:9, CMW :14FILTER keyword of RESOURCE CT:67filter panel PSW:118, CMW :14, CMW :43filters GUI :17Find Window WMUG :37finding a workstation WMUG :70finding an item in the List view WMUG :37finding data in a list GS:11, CMW :16fixed part of JCL record (JCLREC) layoutDGR:140fixed resources PSW:36, PSW:39, PSW:93fixed resources, securityCT:94, CT:102fixing problems UX:71focal-point communications router (EQQROUTER)T4:53focal-point tracker

description T4:10subsystem definition T4:32

folders in Workload Monitor/2 WMUG :8fonts, changing in graphic viewsWMUG :75FORM NUMBER option PSW:98

free days GS:18, PSW:35, PSW:56free-day rule GS:26

selecting PSW:81FREEDAY keyword PSW:134freeing a resource on errorCMW :83frequency specification

for rules GS:28, PSW:77FRIDAY keyword PSW:134FTP, using to download the OS/400 TrackerT4:17function keys CMW :17functions of TME 10 OPC

security CT:98subtasks, activating IG :5

GGDDM IG :75, CMW :16

attributes, settingATTR command CMW :13

command CMW :13GDG recovery PSW:252GENALERT keyword of ALERTS CT:6GENDAYS command GS:28, PSW:78general information report

calendars PSW:372daily planning PSW:388long-term plan PSW:384

General page WMUG :15Plan object WMUG :16

general service (GS) subtaskDGR:54general workstations WMUG :2

defining PSW:25job setup type PSW:25

preparing JCL PSW:104WTO type PSW:25

issuing operations PSW:105general-service executor tasksDGR:54generating eventsPSW:203Generating JCL for a Batch Job panelPSW:119, CMW :19generating TME 10 OPC batch-job skeletonsIG :37generation data group (GDG)

catalog management actionsPSW:226recovery PSW:252

generic alert vectorsCT:249generic search argumentsGS:9, CMW :14global change to application definitionsPSW:117global JCL variable table PSW:262, PSW:280global search charactersPSW:294GMT (Greenwich Mean Time) PSW:205GMTOFFSET keyword of OPCOPTSCT:59grand total for period, long-term plan reportPSW:387GRAPH command PSW:89, CMW :13, CMW :16Graph view

compared with Graphs viewWMUG :82graph view, operation GUI :26

Index 25

graphic display of dependenciesGI :18graphic views of Workstations List objectWMUG :6

changing color WMUG :73changing fonts WMUG :75considerations when using graphsWMUG :77copying WMUG :78exporting WMUG :78positioning labels WMUG :77positioning legends WMUG :77tailoring graphs WMUG :73

graphical attribute table IG :75Graphical Data Display Manager, see GDDMgraphical user interface (GUI)GI :6graphically displaying data in a listCMW :16graphs

fields for WMUG :67Graph view of a workstation objectWMUG :82Graphs view of Workstations List objectWMUG :71Merged graph of Workstations List objectWMUG :79printing WMUG :85

group applicationsspecifying PSW:71

group definitionsadding an occurrence to a groupCMW :51adding to the current planCMW :44, CMW :52guidelines PSW:66, PSW:68in the long-term plan PSW:156, PSW:163introduction PSW:12

group ID (GID) UX:18GROUP keyword PSW:128GROUP keyword of XCFOPTSCT:78grouping return codesPSW:251GS (general service) queueDGR:43GS (general service) subtaskDGR:54GSTASK keyword of OPCOPTSCT:59GTABLE keyword of OPCOPTS CT:60, PSW:280GUI GI :6, DGR:27GUI for Application Description

downloading from MVS GUI :2hardware requirementsGUI :1help GUI :6installing GUI :3loading software IG :32multiple instances GUI :12overview GUI :1software requirementsGI :51, IG :179, GUI :1starting GUI :5uninstalling GUI :8

Hhandling operations ended in errorGS:62Handling Operations Ended in Error panelCMW :69hardware requirementsGI :49hardware requirements for AIXUX:109

hardware requirements for DEC Open/VMSUX:117hardware requirements for HP-UXUX:111hardware requirements for OS/2OW:67hardware requirements for Pyramid MIPS ABIUX:119hardware requirements for SolarisUX:113hardware requirements for SunOSUX:115hardware requirements for Windows NTOW:69HDRS keyword of BATCHOPT CT:18HELLO command WMUG :101HELLO program GUI :52help GUI :6HELP command GS:8helpdesk GI :39heterogeneous systems, controllingCT:220

introduction CT:219operation-initiation exit (EQQUX009) CT:219VM, event reporting CT:221

HEX value in variable validation PSW:278high date PI:8HIGHDATE keyword of INIT CT:30HIGHEST RETURNCODE option PSW:96, PSW:111highlight attributes, on panelCMW :10HIGHRC keyword of JTOPTS CT:42, PSW:138, PSW:214Hiperbatch PSW:53

sample CT:269Hiperbatch support

COFDLFnn, updating IG :49installing CT:185

HIST command CMW :59histogram showing workstation utilizationPSW:168history database CMW :25, CMW :59history function CMW :59

installing IG :74using PSW:211

HOLD status PSW:198HOLD/RELEASE option PSW:98holding operations CMW :31HOLDJOB keyword of EWTROPTS CT:25home directory UX:21, OW:28

setting UX:50, OW:30host names UX:23, OW:15HOSTCON keyword of TRROPTSCT:77hot standby GI :27, IG :19how to install fixes on non-AIX tracker machineUX:121HP-UX


HP-UX requirements, hardware and softwareUX:111

II operation status codePSW:323, CMW :101I row command CMW :58IADAYS keyword PSW:131IATIME keyword PSW:131


IBMaccess code DGR:5customer number DGR:5program support DGR:4support center DGR:4

IBMEQQ directory GUI :4IBMOPC resource classIG :53ICHRFR01 IG :53ICHRIN03 IG :51ICHRRCDE IG :53icon

Operations List object WMUG :25Plan object WMUG :12Workstations List object WMUG :65

icon view, list GUI :19Icons view

Operations List object WMUG :58Workstations List object WMUG :63

ID (Tracker identification record) layoutDGR:137Identifying related initialization-statement parametersCT:79IEFUJI DGR:46IKJTSOnn member of SYS1.PARMLIB

AUTHCMD statement, updating for TME 10 OPC TSOcommands IG :48

AUTHTSF statement, updating for EQQMINORIG :48imbedded blanks in JCL variablesPSW:282

with COMP keyword PSW:295implementation GI :46—46implementing TME 10 OPC PSW:1IMS GI :3

tracking jobs submitted byPSW:257in-effect dates PSW:84in-progress operationPSW:304in-use list CMW :91inactive workstation

effect on operations PSW:97INCDSN keyword of JCCOPTSCT:34incident log (JCC)

considerations when allocatingIG :66incident logging, function of JCCCT:176incident-record-create exit (EQQUX006)CT:124, CT:176INCLUDE initialization statement CT:31

NOERROR keyword CT:31Include window

Operations List object WMUG :30, WMUG :31,WMUG :59

Workstations List object WMUG :68including dependenciesCMW :48including JCL PSW:283, PSW:293including objects

effect of security accessWMUG :30, WMUG :58,WMUG :69

operations in Operations List objectWMUG :30,WMUG :58

specifying include criteria WMUG :31, WMUG :32,WMUG :59, WMUG :69

including objects(continued)workstations in Workstations List objectWMUG :68

including operationsin Operations List object WMUG :30

incorrect output (INCORROUT) keywordDGR:12INCORROUT (incorrect output) keywordDGR:12independent variablePSW:275INFO/MAN (Information/Management) GI :3information about jobs CMW :27Information/Management

interface via EQQUX007 CT:126Information/Management (INFO/MAN) GI :3INIT initialization statement CT:29, PI:8

CWBASE keyword CT:29example of CT:30HIGHDATE keyword CT:30SUBSYS keyword CT:30TRACE keyword CT:30

INIT request (PIF) PI:18beginning a communication sessionPI:6

initial library list T4:35initialization event (EXI) layout DGR:127initialization statements

ALERTS CT:6example of CT:8GENALERT keyword CT:6MLOG keyword CT:6RECEIVERID keyword CT:6WTO keyword CT:7

APPCROUT CT:9, T4:9ADDR keyword CT:9example of CT:9WORKSTATIONS keyword CT:9

AROPTS CT:10AUTHUSER keyword CT:10ENDTIME keyword CT:10example of CT:11EXCLUDECC keyword CT:11EXCLUDERC keyword CT:11PREDWS keyword CT:11STARTTIME keyword CT:11USERREQ keyword CT:11

AUDIT CT:12ACCESS keyword CT:13AMOUNT keyword CT:13example of CT:13FILE keyword CT:13

AUTHDEF CT:14CLASS keyword CT:14example of CT:15LISTLOGGING keyword CT:15SUBRESOURCES keywordCT:15TRACE keyword CT:15

BATCHOPT CT:16CALENDAR keyword CT:16CHECKSUBSYS keyword CT:17CONTROLLERTOKEN keyword CT:17

Index 27

initialization statements(continued)BATCHOPT (continued)

DATEFORM keyword CT:17DB2AVAIL keyword CT:17DB2SYSTEM keyword CT:17DPALG keyword CT:17DPROUT keyword CT:18DYNAMICADD keyword CT:18example of CT:22HDRS keyword CT:18LOGID keyword CT:18LTPDEPRES keyword CT:19NCPTROUT keyword CT:19OCPTROUT keyword CT:19OPERDALL keyword CT:19OPERHISTORY keyword CT:20OPERIALL keyword CT:20PAGESIZE keyword CT:20PLANHOUR keyword CT:20PREDWS keyword CT:20PREVRES keyword CT:20RESGLOBAL keyword CT:20RETAINOPER keyword CT:21SUBSYS keyword CT:21SUCCWS keyword CT:21VALEACTION keyword CT:21

creating the statementsCT:3DBCSOPTS CT:22

APPLID keyword CT:23example of CT:23OWNERID keyword CT:23SORTORDER keyword CT:23

defining IG :73determining success or failure of a jobPSW:215ERDROPTS CT:23

ERSEQNO keyword CT:24ERWAIT keyword CT:24example of CT:24RELDDNAME keyword CT:24

EWTROPTS CT:24EWSEQNO keyword CT:25EWWAIT keyword CT:25example of CT:28HOLDJOB keyword CT:25PRINTEVENTS keyword CT:27RETCODE keyword CT:27SKIPDATE keyword CT:27SKIPTIME keyword CT:27STEPEVENTS keyword CT:27SUREL keyword CT:27

EXITS CT:28, DGR:66CALLnn keyword CT:28example of CT:29LOADnn keyword CT:28

guide CT:79—87INCLUDE CT:31

NOERROR keyword CT:31

initialization statements(continued)INIT CT:29

CWBASE keyword CT:29example of CT:30HIGHDATE keyword CT:30LUNAME keyword CT:30SUBSYS keyword CT:30TRACE keyword CT:30

INTFOPTS CT:31example of CT:33PIFCWB keyword CT:32PIFHD keyword CT:32

JCCOPTS CT:33CHKCLASS keyword CT:33example of CT:35INCDSN keyword CT:34JCCQMAX keyword CT:34JCWAIT keyword CT:34MAXDELAY keyword CT:34SYSOUTDISP keyword CT:34UMAXLINE keyword CT:34USYSOUT keyword CT:35

JOBOPTS CT:35CATMCLAS keyword CT:36CATMDISP keyword CT:36CHSMWAIT keyword CT:37example of CT:39JOBLOGRETRIEVAL keyword CT:37MAXNUMUSYS keyword CT:39

JTOPTS CT:39BACKUP keyword CT:41CURRPLAN keyword CT:41DUAL keyword CT:41ERRRES keyword CT:42ETT keyword CT:42example of CT:53HIGHRC keyword CT:42, PSW:96JOBCHECK keyword CT:42JOBSUBMIT keyword CT:43, PSW:96JTLOGS keyword CT:43LIMFDBK keyword CT:43MAXJSFILE keyword CT:44NEWOILIMIT keyword CT:44NOERROR keyword CT:45, PSW:96OFFDELAY keyword CT:46OPINFOSCOPE keyword CT:46OPREROUTEDEFAULT keyword CT:46OPRESTARTDEFAULT keyword CT:47OUTPUTNODE keyword CT:47OVERCOMMIT keyword CT:47PLANSTART keyword CT:48PRTCOMPLETE keyword CT:48QUEUELEN keyword CT:48SHUTDOWNPOLICY keyword CT:48SMOOTHING keyword CT:48STATMSG keyword CT:49SUBFAILACTION keyword CT:50


initialization statements(continued)JTOPTS (continued)

SUPPRESSACTION keywordCT:50, PSW:106SUPPRESSPOLICY keywordCT:50, PSW:106TRACK keyword CT:51WSFAILURE keyword CT:52, PSW:97WSOFFLINE keyword CT:52, PSW:97

NOERROR CT:54LIST keyword CT:55

OPCOPTS CT:56APPCTASK keyword CT:57ARPARM keyword CT:57BUILDSSX keyword CT:57CATACT keyword CT:58CATMGT keyword CT:58CONTROLLERTOKEN keyword CT:59DB2SYSTEM keyword CT:59ERDRPARM keyword CT:59ERDRTASK keyword CT:59EWTRPARM keyword CT:59EWTRTASK keyword CT:59example of CT:63GMTOFFSET keyword CT:59GSTASK keyword CT:59GTABLE keyword CT:60JCCPARM keyword CT:60JCCTASK keyword CT:60JOBLOGDEST keyword CT:60NCFAPPL keyword CT:60NCFTASK keyword CT:60OPCHOST keyword CT:60OPERHISTORY keyword CT:61RECOVERY keyword CT:61RODMPARM keyword CT:61RODMTASK keyword CT:61SERVERS keyword CT:61SSCMNAME keyword CT:61STORELOG keyword CT:62VARSUB keyword CT:62

parameter library (EQQPARM)CT:4parameter library (EQQYPARM) CT:4reference CT:3—78related

auditing CT:81automatic job recovery CT:84catalog managementCT:83configuration CT:80determining success or failure of a jobCT:82identifying CT:79—87output processing CT:87performance CT:85recovery C

Date post:	23-Oct-2020
Category:	Documents
Upload:	others
View:	6 times
Download:	0 times

publib.boulder.ibm.compublib.boulder.ibm.com/tividd/td/opc/eqqx0mst/en... · Notices Trademarks The...

Documents