Nu Horizons releases its October 2011 Edition of Portal - your gateway to today’s leading technology products
32
October - December 2011 Americas Edition Gennum’s Latest SD/HD/3G-SDI Cable Equalizer Solutions See page 10 IN THIS ISSUE: Your Gateway to Today’s Leading Technology Products AUDIO/VIDEO Conexant Gennum BUS INTERFACE Pericom DEVELOPMENT TOOLS Lattice DISPLAYS Axiomtek LG Displays MEMORY ISSI MICROCONTROLLERS STMicroelectronics POWER MANAGEMENT Exar Linear Technology Micrel POWER SUPPLIES LHV Power PROGRAMMABLE LOGIC Lattice 15” EXTENDED TEMPERATURE FANLESS TOUCH PANEL COMPUTER See page 12
Come to our FREE half-day seminar and learn first hand from the program’s author, Mike Engelhardt.Become part of the phenomenon sweeping the engineering world and
join the largest independent users’ group of any SPICE program ever.
Don’t miss out - reserve your spot today.
www.nuhorizons.com/LTspice
Scan barcode for more information on the LTspice Seminar Series
Don't
miss
your
chan
ce to
regis
ter
for t
he las
t 5 ci
ties i
n
North
Am
erica
!
PO
RTA
L C
ON
TE
NT
S
Nu Horizons Electronics is a leading
distributor of advanced technology
semiconductor, display, illumination,
power, system and telecommunication
solutions to a wide variety of commercial
original equipment manufacturers
(OEMs) and electronic manufacturing
services providers (EMS).
With sales facilities in 45 locations
across North America and Asia and
regional logistics centers throughout
the globe, Nu Horizons partners with
a limited number of best-in-class
suppliers to provide in-depth product
development, custom logistics and
life-cycle support to its customers.
Need more information right away?
Just use your smartphone to scan the barcodes throughout this publication and you'll link to more detailed information.
Note: You will need a QR Code Reader downloaded to your phone (i-nigma is free).
All registered trademarks displayed in this publication constitute the intellectual property of their respective holders. The technical information within this publication has been provided by Nu Horizons' suppliers. Nu Horizons does not assume any liability for its accuracy. Prices are subject to change without notice.
APPLICATION NOTES
Atmel, Lattice Semiconductor, Murata Power Solutions
Using Lattice Platform Manager and MuRata DC-DC Converters to Create Power Subsystems for Embedded Applications
4
DEVELOPMENT TOOLSLattice Semiconductor Platform Manager Development Kit 5
Lattice Semiconductor Power Manager II Hercules Development Kit 5
Lattice Semiconductor ProcessorPM Development Kitt 6
DisplaysLG Displays — Broad Product Offering for Display Markets
13
MemoryISSI — Mobile SDRAMs for High Performance with Low Power
14
MicrocontrollersSTMicroelectronics — STM32 F4 Series High-Performance Cortex-M4 MCU
15
Power ManagementExar — Evolutionary Solutions forMulti-Channel Digital PWM Step Down Controllers
16
Power ManagementLinear Technology — LT6109 - High Side Current Sense Amplifier with Reference and Comparators
17
Power ManagementLinear Technology — LTC3618 - Dual 4MHz, ±3A Synchronous Buck Converter for DDR Termination
18
Power ManagementMicrel — Super Switcher II™ and Super Switcher IIG™ Regulators
19
Power Supplies LHV Power — Industrial Power Supplies 20
Programmable Logic Lattice Semiconductor — IP Suites for LatticeECP3™ 21
ADVERTISEMENTSLinear Technology Cooking with LTspice Seminar Series 2
Nu Horizons Microcontroller Matrix 22-23
Nu HorizonsBoard Level DC-DC Converters:Power Supplies / Modules Matrix
24
Nu Horizons Analog to Digital Converter Matrix 25
Nu Horizons Display Technologies Line Card 26
Nu Horizons Embedded Solutions / Single Board Computers 27
Nu Horizons Semiconductor Technologies Line Card 28-31
Nu HorizonsEnhance Your Design...With Nu Horizons Education and Development Solutions
32
Using Lattice Platform Manager and MuRata DC-DC Converters to Create Power Subsystems for Embedded Applications
Introduction
Increasing reliability and availability requirements of modern
embedded systems has put new demands on power subsystem designs.
For example, the traditional requirement for hot swap capabilities have now
grown to include advanced features like voltage scaling to save power and
improve reliability, complex fault detection and logging features to simplify
testing and field servicing. Advanced power system components, like the
Lattice Platform Manager and MuRata DC-DC converters can support the
growing need for advanced features in modern power subsystem designs.
This application note will use an example design, for the power
subsystem on a communications system monitor card, to describe the
key device selection and design considerations required for these types of
designs. Key features will include voltage scaling to save power during light
load conditions, increased supply accuracy to increase headroom needed
during high dI/dt loads, and fault logging to improve reliability and prevent
unanticipated down time.
Key components for the design will include the Lattice Platform
manager to sense and control the power subsystem, MuRata DC-DC
converters to source the power rails on the printed circuit board and Atmel
Serial Flash memory to store power fault information during data logging.
Topics in this application note are organized by design task and each
topic is a stand-alone section followed by specific design guidelines. The
topics covered in this application note include the following:
1) Application Description
2) Device Selection
a. Lattice Platform ManagerTM
i. Functional Overview
ii. Key Features
b. MuRata DC-DC Converters
i. Functional Overview
ii. Key Features
c. Atmel Serial Flash Memory
i. Functional Overview
ii. Pin Descriptions
3) Design Considerations
a. Power Sub-system Features
i. Trimming and Margining
ii. Fault Logging
4) Summary and References
A significant amount of supporting documentation is listed in the reference
section at the end of this application note, making it easy to locate
additional information. To download the complete application note, please
scan the barcode below or visit the application notes section of the Nu
Horizons website.
Scan barcode to access complete application note
4 Nu Horizons offers a wide range of application notes and white papers. For more information, please visit www.nuhorizons.com/application_notes
AP
PL
ICA
TIO
N N
OT
ES
Figure 1: Board Level Diagram of Example Communications System Monitor Card Power Subsystem
Power Manager II Hercules Development Kit The Power Manager II Hercules Development Kits are versatile, ready to use hardware platforms for evaluating and designing with Power Manager II devices. A Standard and Advanced Edition of each kit is available. Using the preloaded Board Digital Management design provided with the development kit, you can test within minutes power management functions such as power supply hot swap control, redundant supply selection and payload power management. You can then build your own designs using the free downloadable reference design source code, implementing these features in less than an hour.
Development Kit Contents:
The Standard Edition Hercules Development Kit features the following: Preloaded Board Digital Management demo Hercules Standard Edition evaluation board Power Manager II ispPAC-POWR1220AT8 and MachXO LCMXO2280 PLD
The Advanced Edition Hercules Development Kit features the following: Preloaded Board Digital Management demo Hercules Advanced Edition evaluation board with CompactPCI headers Power Manager II ispPAC-POWR1220AT8 and MachXO LCMXO2280 PLD Backplane accessory evaluation board and power supply for live hot-swap demonstrations AC adapter (international plugs) USB Connector Cable RoHS-compliant packaging and process
Nu Horizons offers a wide range of development / evaluation boards, tools and kits. For more information, please visit www.nuhorizons.com/development
Scan barcode for more information regarding the Power Manager II Hercules Development Kit
5
DE
VE
LO
PM
EN
T T
OO
LS
Platform Manager Development Kit The Platform Manager Development Kit is a versatile, ready to use hardware
platform for evaluating and designing with Platform Manager devices.
Using the preloaded Board Digital Management design provided with the
development kit, you can test within minutes power management functions such
as power supply hot swap control, redundant supply selection and payload power
management. Digital management support functions include reset distribution,
system interfacing, power-on configuration and fault monitoring and logging. The
kit also demonstrates enhanced power management features such as power supply
closed loop trimming and margining. Power for the board comes from a 12VDC wall
plug supply.
You can then build your own designs using the free downloadable reference
design source code, implementing these features in less than an hour.
Order Number Price
LPTM10-12107-DEV-EVN $54.50 - For a limited time only
Order Number Price
PAC-POWR1220AT8-HS-EVN (Standard) $69.50 – For a limited time only
Scan barcode for more information on the Platform Manager Development Kit
Development Kit Contents:
Preloaded Power Management Demo LPTM10-12107, Platform Manager, 208-ball ftBGA package 35mm slide pots to emulate supply rail variations Pads for user I/O, LED, and switches JTAG and I2C interface headers ispDOWNLOAD Cable (HW-DLN-3C) USB Cable Programmable with ispVM System software AC adapter (international plugs) QuickSTART Guide
Figure 1: Board Level Diagram of Example Communications System Monitor Card Power Subsystem
DE
VE
LO
PM
EN
T T
OO
LS
Nu Horizons offers a wide range of development / evaluation boards, tools and kits. For more information, please visit www.nuhorizons.com/development6
Scan barcode for more POWR1014A Breakout Board Evaluation Kit information
POWR1014A Breakout Board Evaluation Kit Lattice Breakout Board Evaluation Kits offer a convenient way to conduct hardware evaluations by providing easy hand-access to densely-spaced PLD I/Os. Because the center-to-center spacing of the package pins/balls of PLD modern packages can be 1.00 mm BSC (Basic Spacing between Spacing) or less, it can be very difficult to probe I/Os once a circuit board has been fabricated. The electrical traces of Lattice Breakout boards connect each I/O to header landings that have 100 mil (0.1 inch) centered holes. By adding test probes, jumper wires, or pin headers to the header landings, you can easily evaluate voltage monitors, high-voltage FET drivers, and open drain outputs of the POWR1014A.
Development Kit Contents:
Preprogrammed with hardware test program Power Manager II POWR1014A-02TN48I LEDs Expansion Header Landings Prototyping Area USB Mini Jack Socket (Program/Power) JTAG Header Landing RoHS-compliant packaging and process USB connector cable
Scan barcode for more information regarding the ProcessorPM Development Kit
ProcessorPM Development Kit Get started integrating multiple power management ICs fast with the ProcessorPM Development Kit. To help you get started quickly, the kit includes a pre-configured processor support demonstration design that will support hundreds of microprocessor, DSP, ASSP, or ASIC power management scenarios. The demo integrates three key support functions for a processor: voltage supervisor, watchdog timer (WDT), and reset generator. The board is controlled with switches and pushbuttons. And a slide potentiometer emulates brown-out conditions on a 2.5V supply rail. A pin header provides access to IOs of the ProcessorPM and the POWR6AT6. You may extend or modify the pre-configured demo using PAC-Designer® software.
The board can be modified to support programming with Lattice ISP Download Cables with a
parallel PC connection and demonstrate power supply margin/trim scenarios with the POWR6AT6.
Order Number Price
PACPOWR605-P-EVN $24.50 - For a limited time only
Order Number Price
POWR1014A-B-EVN $14.50 – For a limited time only
Development Kit Contents:
Pre-Configured Processor Support Demo ProcessorPM-POWR605 Power Manager II POWR6AT6 3.3V, 2.5V, and 1.8V Supply Rails LEDs Slide Potentiometer 2x14 Expansion Header USB Mini Jack Socket (Program/Power) 2 Push Buttons 4-Bit DIP Switch JTAG and I2C Header Landings RoHS-compliant packaging and process USB connector cable QuickSTART Guide
7
PAC-Designer 6.1 Now Available for Immediate Download Lattice Diamond 1.3 software is now integrated with Lattice’s PAC-Designer® 6.1 mixed signal design tools, providing design support for Lattice’s programmable mixed signal Platform Manager™ devices. Lattice Diamond 1.3 software provides an automated simulation environment not previously available to mixed signal designers, and integrates with PAC-Designer 6.1 software to simplify platform management design.
Key New Features – PAC-Designer 6.1:
Platform Manager simulation environment automated Previously manual process is now easier to navigate Files and procedures are fully automated for Aldec-HDL simulations Combined CPLD and FPGA designs are easily visualized
Installation procedure simplified Download and install Diamond 1.3 Download and install PAC-Designer 6.1 Only the Diamond free license is required Up and running immediately after installation
PAC-Designer 6.1 is backward compatible with previous versions All previous Power Manager II and ispClock products supported Programming support now via Diamond Programmer or ispVM
Nu Horizons offers a wide range of development / evaluation boards, tools and kits. For more information, please visit www.nuhorizons.com/development
Scan barcode for more information regarding the PAC-Designer 6.1 Software Download
DE
VE
LO
PM
EN
T T
OO
LS
Lattice Diamond® Design Software version 1.3 Lattice has released Lattice Diamond® Design Software version 1.3, as well as
PAC-Designer version 6.1 that is now linked to Lattice Diamond. Available for both
Windows and Linux, Lattice Diamond 1.3 continues to feature design exploration,
ease of use, improved design flow, and numerous other enhancements.
Diamond Software LicensingA free license can be generated immediately from the Lattice website upon request. This license provides access to many popular Lattice devices such as MachXO2 and LatticeECP2™ at no cost.
A subscription license can be purchased from Nu Horizons which adds support for all Lattice FPGAs including the latest LatticeECP3™ devices.
Scan barcode for more information on Lattice's Diamond Design Software
Key New Features – Diamond 1.3:
Ease of Use Enhancement: Added Clock Jitter Analysis Design Flow Enhancement: Added Pin Migration Information Design Exploration Enhancement: New Post-Synthesis Resource Utilization Enhanced Software Support for the MachXO2 Device Family
Key Improved Features – Diamond 1.3:
Design Flow Enhancement: Improved Simulation Files Support Design Flow Enhancement: Intuitive Synthesis Design Constraints Flow Ease of Use Enhancement: Reveal Cable Connection Speed Up Design Exploration Enhancement: Run Manager Enhancement Ease of Use Enhancement: New Diamond Programmer Design Flow Enhancement: Pin Layout file and Pinout file Enhancements
Using Conexant KX1400 and ST MCUs in Audio Playback Applications
Scan barcode for more information regarding Conexant'x KX1400 and ST MCUs
AU
DIO
/ V
IDE
O
8
Figure 1: Typical Digital Audio Playback Architectures
The introduction of digital audio playback technology has found a variety of applications where adding audio and/or voice playback to familiar
industrial and consumer devices has significantly improved user interfaces. It is now possible to easily adapt designs for different languages and geographic
regions or to include universal warning signals, tone based announcement indications, audio feedback for touch panels and other similar capabilities that
provide enhanced user experiences.
The availability of integrated digital audio processors, like the Conexant KX1400 now makes it easy to add audio playback capability to a variety of
designs. Using a companion MCU, like the STM8 from ST Microelectronics, audio subsystems can be created for a wide range of applications. The inclusion
of an MCU makes it possible to add significant control and ‘intelligence’ to the design further enhancing the user experience. See the adjacent side panel for
several examples.
Typical Architectures Digital audio playback applications with a central MCU for control have three typical architectures
depending on how the digital audio information is stored. Digital audio data can be stored external to the
audio processor using a serial flash memory with an SPI bus, digital data can be stored in the external
memory used by the MCU to store program and data, or the audio data can be stored within the MCU in a
memory shared with program control. Figure 1 below illustrates these main architecture options.
The first two options use an external Flash memory either accessed by the MCU or directly by the
audio processor. This provides a significant amount of storage space either for audio files (when the
memory is controlled by the audio processor) or program control (when the memory is coupled to the
MCU). These approaches can be expensive solutions, but can be a good alternative for applications like
industrial and automotive applications, where complex control processing is required and significant
memory space can be needed for digital audio files. The MCU internal memory architecture is used when
relatively simple control and smaller audio storage is required. In many applications a significant amount
of audio storage (up to several minutes) is possible when using MCU internal storage and this can cut
parts count and reduce cost significantly without sacrificing user control flexibility. Home appliances
and consumer applications are typical examples that can benefit from using the MCU internal memory
architecture.
MCU
FlashMemory
AudioOutputAudio
Processor
MCU withInternal
FlashMemory
Audio Processor
AudioOutput
MCU-External Memory
Audio Processor-External Memory
MCU-Internal Memory
MCU with Internal Flash Memory
FlashMemory
AudioOutputAudio
Processor
Example Audio Playback Applicationsfor the Conexant KX1400
Industrial Warning signals
Vending machines
Bus/metro announcement system
Audio feedback in touch panels
Automotive Remote keyless entry
Door chimes
Radar detectors
Audio feedback in touch panels
Warning announcements
GPS indicators
Home Appliances Refrigerators
Microwaves
Rice cookers
Coffee makers
Security Residential home security panel
Smoke detectors
Fire alarms
Consumer Remote control
Security locks
Tracking/Security fobs
For more information, including pricing, availability, datasheets and samples (if available), please visit www.nuhorizons.com/portal
AU
DIO
/ VID
EO
For more information, including pricing, availability, datasheets and samples (if available), please visit www.nuhorizons.com/portal 9
Conexant KX1400 The KX1400 is an audio playback IC designed to play 8KHz audio data
directly to an external speaker via an on-chip digital audio processor and
class-D driver. Both 12-bit PCM and 4-bit IMA ADPCM data formats are
supported. It also has a built-in tone generator capable of generating tones
at 4096 different frequencies. The on-chip audio processor eliminates the
need for an external low-pass filter in most cases. The KX1400 utilizes low
power CMOS technology and provides a stand-by power-savings state,
making it well suited for battery powered applications.
The KX1400 operates in either a stand-alone mode or interfaced to
a microcontroller (MCU) host. Audio data is provided to the KX1400 from
either a user-programmed external serial memory or from the host MCU.
Under MCU control, the user can select phrases or tone sequences to play
from the external memory, play tone sequences via commands, or stream
audio data directly to the on-chip audio processor. In stand-alone mode no
MCU is required; on reset, the KX1400 plays a single phrase from external
memory and then returns to a stand-by power-saving state.
A block diagram of the KX1400 along with the external STM8 MCU is
shown in Figure 2. The MCU controls all operation of the KX1400 via the SPI
bus. A variety of commands are available to play tones, phrases, configure
outputs, set the volume level and mute or un-mute the speaker output all
directly via MCU control.
In this design the Class D amplifier included on the KX1400 further
reduces component count since an external device isn’t needed to amplify
the signal to drive an 8 Ohm or greater speaker directly. Additionally the
factory calibrated internal 8 MHz oscillator provides the precision time base
for audio functions without the need for any external components.
STMicroelectronics STM8 MCU ST Microelectronics offers a wider range of flexible, high-performance
and low-power MCUs appropriate for the widest range of embedded
control applications. The STM8 MCU family offers 8-bit processing with
a variety of key peripherals, internal flash memory and on-chip clocking
and power management blocks to keep device count low while providing
the utmost in flexibility and performance. The STM8 device family features
devices optimized for automotive (STM8A), and general purpose (STM8S)
applications. In our design the STM8S family is the best fit and the high
capacity memory (128KB Flash) offered by the STM8S207SB in a space
saving 44pin package is an excellent option.
The STM8S207SB has an SPI port that can be easily used to connect
to the KX1400 to control all audio operations. The SPI port provides full
duplex synchronous transfers or simplex synchronous transfer, master or
slave operation, up to a 10MHz transfer rate, programmable clock polarity
and phase, programmable data order, interrupt on transmit and receive
as well as faults and overrun, and a CRC function for improved reliability.
Table 1 below shows the SPI signals used to connect the STM8S207SB to
theKX1400.
Signal Function Direction
SCK Serial Clock Input
MISO Master In/ Slave Out Input
MOSI Master Out/Slave In Output
NSSS Slave Select Input
Table 1: SPI Signal Definition
The STM8S Family can operate in several low power modes and can
wake from a low power state in either a full or half duplex SPI transmit
mode that is useful for reducing power in these types of audio applications.
Gennum’s Latest SD/HD/3G-SDI Cable Equalizer Solutions Gennum offers the most comprehensive, end-to-end portfolio of broadcast
video solutions with a commitment towards unmatched performance and signal
integrity.Gennum’s award winning portfolio of professional and broadcast solutions
includes Crosspoints, Equalizers, Reclockers, Cable Drivers, Serializers, Deserializers,
Timing and Clock Cleaners and Video Optical Module solutions.
APPLICATIONS:
Like any transmission medium, cables impose transmission losses on the signals they carry, manifested as signal dispersion and loss of high-frequency content. Unless something is done to compensate for these losses, they can render the cables useless for transmitting high resolution & high speed signals over reasonable distances. Therefore, to compensate for cable losses, an equalizer can be utilized at the receiving end of the cable.
Designed for use in SMPTE 424M, SMPTE 292M, SMPTE 259M serial digital video applications Serial routing switchers Professional video editing equipment Production and master control switchers Distribution amplifiers Broadcast video to Fiber Channel or Gigabit Ethernet transport linecards Camera control units for medical imaging equipment
GS344X KEY FEATURES:
Gennum’s Latest SD/HD/3G-SDI Adaptive Equalizers SMPTE 424M, SMPTE 292M, and SMPTE 259M compliant Supports date rates from 125Mb/s to 2.97Gb/s and DVB-ASI at 270Mb/s Manual bypass for low data rates with slow rise/fall times Differential outputs supporting DC coupling to 1.2V to 3.3V CML logic (GS3440/GS3441) Programmable carrier detect with squelch threshold adjustment Single 3.3V supply 0-6dB gain boost selection pin Selectable de-emphasis : 2dB, 4dB and 6dB Temperature range -40 to +85 ºC GS3440 power consumption is typically 167mW when DC coupled at 1.2V Automatic power-down on loss of signal Standby power typically <30mW GS3440 & GS3442 are in 16 pin QFN package (4x4mm) GS3440 is also available in a dual output version which is the GS3441 Typical equalized length of Belden 1694A cable for the GS3440 and GS3441: 200m at 3G data rates 250m at HD data rates 500m at SD data rates
GS3440 is pin compatible with GS2994, GS2984, GS2964,GS2974A and GS2974B GS3442 optimized for high-density board layouts is and pin compatible with the GS2974A and most Gennum 16QFN HD Equalizers
GS344X BENEFITS:
Gennum’s Latest SD/HD/3G-SDI Equalizers DC coupling on the high speed serial outputs to seamlessly interface with other devices (eg., FPGAs) operating from power supplies as low as 1.2V Voltage programmable carrier detect threshold to mute the serial output when a specified connected cable length is exceeded – ideal to distinguish between low amplitude SDI signals and noise at the input Bypass control pin means no equalization or DC restoration will take place and the input signal goes straight through to the output thus offering a reduction in overall power consumption Industry’s lowest output jitter adaptive cable driver and all guaranteed over production testing Longest cable reach at 3G data rates of 200m @ 0.5UI max output jitter 0-6dB gain boost pin presents the incoming signal with a flat, wideband gain of 6dB. An ideal feature for accommodating BNC connector compensation GS3440 and GS3442 are pin compatible with Gennum 16 QFN equalizers and can be used as drop in replacements in many applications GS3440 power consumption is typically 167mW using a single 3.3V power supply for the analog core and a 1.2VV power supply for the output driver GS3442 high density equalizer, with its reduced crosstalk sensitivity is ideally suited for high density multi-lane environments
GS3442 is recommended for use with the latest generation of BNC alternatives including HD-BNC, DIN 1.0/2.3 and Mini BNC connectors
Scan barcode for more Gennum's 3G-SDI Cable Equalizer solutions
For more information, including pricing, availability, datasheets and samples (if available), please visit www.nuhorizons.com/portal
BU
S IN
TE
RF
AC
E
For more information, including pricing, availability, datasheets and samples (if available), please visit www.nuhorizons.com/portal 11
Overcome Signal Attenuation and Noise & Jitter Interference Challenges in USB 3.0 System DesignTo offset the signal quality degradation, Pericom offers a broad array of USB 3.0 ReDrivers for maintaining a high level of SI (Signal Integrity) during Tx and Rx of USB 3.0 high-speed signals.
The highly anticipated USB 3.0 is now seeing wide spread adoption in PC, Notebook, Server and Portable Devices. USB 3.0 delivers an unprecedented bandwidth, 10 times that of USB 2.0. USB 3.0 supports full-duplex communication, or the ability to send and receive data simultaneously. It also improves QoS (Quality of Service) thanks to advance data error checking, while saving power with the USB 3.0 link power management. Most importantly, it is 100% backward compatible with USB 2.0 devices. However, with all these added benefits, the high-speed differential signal of USB 3.0 also introduces uncontrollable noise, or signal attenuation, causing USB 3.0 signal voltage swing to overshoot or undershoot the “optimal eye opening”. This distorts the quality of USB 3.0 signal eye during high-speed signal switching. USB 3.0 signal quality is gravely impacted when
random or deterministic noise degrades the signal quality with crosstalk during transmitting and receiving of USB 3.0 packets between USB 3.0 hosts and peripheral devices.
Faced with complex PCB layout challenges, USB 3.0 system designers see significant benefits from Pericom USB 3.0 ReDrivers in transmitting and receiving reliable USB 3.0 signals with strong output swing, effective jitter removal, flexible transmit emphasis and receiver equalization. System designers don’t always have full control as to how USB 3.0 end-point devices, like external HDDs, digital cameras, handhelds, or tablets, are connected between host and end point. When the signal travels thru extensive traces, multi-layer vias, connectors before exiting to the USB 3.0 ports or cables, the transmit eye of USB 3.0 host or device may show significant degradation from
jitter, attenuation or insertion loss. As result, the USB 3.0 link may likely suffer greater BER and link recovery during USB 3.0 cable plug and un-plug processes. USB 3.0 system designers need to take greater measures to ensure strong SI during USB 3.0 Tx and Rx signal transmission. Pericom’s USB 3.0 ReDriver devices offer the exact Signal Conditioning Solutions to ensure that the USB 3.0 eye is fully optimized to maintain consistent level of SI when routing extensive long traces across connectors, vias and thru cables.
With Pericom’s USB 3.0 ReDrivers, system designers are given greater flexibility to design and route High-speed USB 3.0 signals in a challenging environments while maintaining consistent level of signal quality.
FEATURES:
USB 3.0 compatible Two 5.0Gbps differential signal pairs Adjustable Receiver Equalization 100Ω Differential CML I/O’s Pin Configured Output Emphasis Control Input signal level detect and squelch for each channel Automatic Receiver Detect with digital enable/disable Low Power : ~315mW Auto "Slumber" mode for adaptive power management Stand-by Mode – Power Down State Single Supply Voltage: 3.3V Packaging: 24-Contact TQFN (4x4mm) or 20-Contact TQFN (4x4mm)
Fully Compliant to USB 3.0 Specification Pericom offers versatile 1-Port (2-Channel), 2-Port (4-Channel) and Single Channel USB 3.0 ReDriver Products Pericom USB 3.0 ReDrivers minimize the effect of Jitter, Noise and Signal attenuation Reducing Overshoot and Undershoot for Optimal USB 3.0 Tx and Rx Eye Opening Pericom USB 3.0 ReDrivers provide effecitive Jitter Removal to reduce cross talk and ISI problems Enable routing of long USB 3.0 circuits through multi-layer PCBs, multi VIAs & Connectors or across extensive cable lengths. Pericom USB 3.0 ReDrivers offer Programmable Equalization, De-Emphasis and Output Swing tailored to various PCB/Circuit layouts Pericom USB 3.0 ReDriver ensures reliable USB 3.0 Signal Transmission beyond 3 Meter Cable
APPLICATIONS:
Tablet PC Notebook PC All-in-One PC USB 3.0 Dongle Notebook Docking Digital Video Camera IP Set-Top Box USB 3.0 Cabling
Smart Phone External USB 3.0 HDD Server/Workstation HD Digital TV Set USB 3.0 Cabling PC Motherboard Portable Media Device
Scan barcode for more USB 3.0 information
DIS
PL
AY
S
12
15” Extended Temperature Fanless Touch Panel Computer (-20°C~ +65°C) – GOT-3156TL-830Durable, Functional, and Thermal Resistant Performance.
Axiomtek introduces its NEW heavy-duty fanless HMI touch panel computer with a 15-
inch high brightness TFT LCD and resolution of 1024x768 pixels- GOT3156TL-830. Designed
for critical temperature environments with an operating temperature of -20°C~ +65°C,
and a built-in fuse to protect the system from over-current.
BENEFITS:
Sunlight Readable Design The panel computer is an Intel Atom-based system that offers a high brightness 400 nit color LCD with sunlight readable technology.
Anti-vibration & IP65/NEMA4 Design
To ensure the systems’ sustainability and reliability, this rugged unit is equipped with an IP65 water/dust-proof & NEMA4 anti-corrosion front bezel, along with a patented anti-vibration design allowing the system to work well under 2G in operation mode.
WLAN Antenna Supported (optional) The GOT-3156TL-830 has a PCI Express Mini Card slot for optional add-ons such as wireless LAN card for 802.11 b/g connections & 3G/GPRS application, dedicated video card, universal analog TV/FM tuner/AV capture card, and more! An optional fixed rotational WLAN antenna is also available for wireless network connection.
Additional Features
This 15-inch HMI PC incorporates a full set of I/O connections including four (4) COM ports, four (4) USB 2.0 ports, one (1) audio (line-out), one (1) Gigabit Ethernet and one (1) VGA connector. It utilizes one (1) 200-pin DDR2 533 SO-DIMM system memory up to 2GB, one (1) SATA HDD and one (1) external accessible CompactFlash™ slot. Additionally, this slim unit supports versatile mounting options such as panel mount, wall mount, VESA arm and desktop stand.
APPLICATIONS:
Transportation
Automation
Rail-way
Control Platforms for Maritime
Oil-pipe Monitoring Systems
FEATURES:
15" XGA (1024 x 768) color TFT LCD display
Fanless cooling system with Intel® Atom™ processor Z510PT 1.1 GHz (GOT-3156T); Intel® Atom™ N270 1.6 GHz (GOT-3156TL)
Supports panel mount, VESA arm, desktop stand & wall mount
Scan barcode for more Axiomtek Touch Panel Computer information
I/O of GOT-3156TL-830
1. Power switch 5. COM 3 (RS-232) 9. Ethernet
2. DC power input 6. COM 1 (RS-232/422/485) 10. USB 2.0 x 2
3. USB 2.0 x 2 7. COM 2 (RS-232) 11. Audio (Line-out)
4. COM 4 (RS-232) 8. VGA
DualView Fanless Low Power ExtendedTemperature
For more information, including pricing, availability, datasheets and samples (if available), please visit www.nuhorizons.com/portal
13
DIS
PL
AY
S
PUBLIC DISPLAY FEATURES:
42” to 72”
Full HD Resolution
Super Narrow Bezel
Slim Edge Lit LED
Access to portrait mode, suitable for digital signage
Featuring “Shineout” for excellent outdoor visibility
IPS FEATURES:
Wide viewing angle
No color wash
Low gamma distortion
High Contrast Ratio
Fast response time for moving images
APPLICATIONS:
Mobile
Application / Industrial
Public Displays
For more information, including pricing, availability, datasheets and samples (if available), please visit www.nuhorizons.com/portal
Scan barcode for more LG Display information
Broad Product Offering for Display MarketsLG Display will lead the world’s display industry into the future.
LG Display is committed to expanding the possibilities of the digital era by developing displays that let users access information in the most precise and vibrant manner possible. Our unrivaled market insights and innovative technologies have put us in the vanguard of the world’s display market. Opening a rich world of digital displays, LG Display will continue to lead the industry through cutting-edge products with vibrant images.
LG Display is opening an exciting new world of displays. Based on the concept of In-Plane Switching (IPS), we offer a wide range of environmentally friendly displays with exceptionally high picture quality. IPS is a wide-viewing angle technology that is based on the principle of aligning liquid crystal molecules horizontally. IPS display products provide vivid and clear colors regardless of the viewing angle, with no afterimages, and feature extremely rapid response speeds. In addition, their picture quality remains stable even when touched, making it well suited for touch screen applications. All our products feature easy-to-use, ultra-convenient technologies. With LG Display, customers can experience the future today.
IPS Displays Part Number
Panel Size (inches)
ResolutionBrightness
(NITS)Aspect Ratio Backlight Type
Viewing Angle (L/R/U/D)
Operating Temp
LM190E05-SL02 19.0 1280 X 1024 280 5:4 CCFL 89/89/89/89 0° to 50° C
LM215WF3-SLC1 21.5 1920 X 1080 250 16:9 LED 89/89/89/89 0° to 50° C
LM230WF3-SLB2 23.0 1920 X 1200 250 16:10 LED 89/89/89/89 0° to 50° C
LM240WU4-SLB3 24.0 1920 X 1200 400 16:10 CCFL 89/89/89/89 0° to 50° C
LM240WU8-SLA2 24.0 1920 X 1200 300 16:10 LED 89/89/89/89 0° to 50° C
LM270WQ2-SLA1 27.0 2560 X 1440 350 16:9 CCFL 89/89/89/89 0° to 50° C
Public DisplayPart Number
Panel Size (inches)
ResolutionBrightness
(NITS)Aspect Ratio
Backlight Type
Viewing Angle (L/R/U/D)
LD420WUB-SCA1 42.0 1920 x 1080 700 16:9 CCFL 89/89/89/89
LD420WUN-SCA1 42.0 1920 x 1080 500 16:9 LED 89/89/89/89
LD420EUD-SDA1 42.0 1920 x 1080 450 16:9 LED 89/89/89/89
LD470WUB-SCA1 47.0 1920 x 1080 700 16:9 CCFL 89/89/89/89
LD470WUN-SCA1 47.0 1920 x 1080 500 16:9 CCFL 89/89/89/89
LD470EUD-SDA1 47.0 1920 x 1080 450 16:9 LED 89/89/89/89
LD470DXS-SCA1 47.0 1366 x 768 700 16:9 LED 89/89/89/89
LD550EUD-SDA1 55.0 1920 x 1080 450 16:9 LED 89/89/89/89
LD550WUD-SCA1 55.0 1920 x 1080 700 16:9 CCFL 89/89/89/89
LD720DUQ 72.0 1920 x 1080 700 16:9 LED 89/89/89/89
Mobile SDRAMs for High Performance with Low PowerOnly ISSI offers a complete portfolio of LPDDR memories, ideal for applications requiring low operating power and ultra low standby current. JEDEC standard 1.8V supply voltage interfaces with all popular MCUs.
Demand continues to grow for mobile consumer devices like GPS/navigation
systems, smart phones, digital cameras, and gaming units. This creates the requirement
for ever increasing processing capacity and with that the need for more dynamic
memory (DRAM) for fast access and processing of the multimedia content. At the same
time, mobile products are shrinking in size, with less space for batteries, necessitating
the use of LPDDR products. These meet the data bandwidth need but have much
lower operating and standby currents than traditional “PC” memory. The result is the
increasing use of higher density LPDDR devices in various form-factors including BGA
package, Package-on-Package (PoP) and Known Good Die (KGD).
Many Industrial and Medical applications also have adopted LPDDR products to
take advantage of the low voltage / low power features of LPDDRs. Virtually every new
MicroController (MCU) uses advanced process technology, limiting I/O voltage to 1.8V.
Rather than having to use DDR2 devices with much higher density than is needed and
with a substantially higher power consumption, engineers are turning to LPDDR devices
such as the popular 128Mb product from ISSI. The IS43LR32400F offers a sweet-spot in
terms of density and performance, but with lower power and reduced system cost than
equivalent DDR2 devices.
For applications such as Smart Grid equipment, Test & Measurement products, and
medical devices which require extended life time support, the LPDDR devices from ISSI
are the perfect solution to the designers memory needs.
APPLICATIONS:
Industrial Applications Smart Meters Smart appliances Test and Measurement equipment
Handheld scanners
Portable Medical Devices Diagnostic and Therapy devices Portable Imaging products
Automotive Applications GPS / Navigation Units Entertainment products
FEATURES: BENEFITS:
Densities: 32Mb – 512Mb in production, 1Gb in 2012
Match memory to application needs
Configurations: x16 and x32 x32 memory for wide-data path / x16 for reduced pin count
High Bandwidth: up to 200Mhz / 400Mbps LPDDR has same data rate as standard DDR but at much lower power
Special Mobile Features:
Temperature Compensated Self Refresh (TCSR) Adjusts refresh rate based on ambient temperature to minimize power consumption
Deep Power Down (DPD) Provide lowest power state to maximize battery life when data retention in not required
Drive Strength (DS)Adjusts output drive strength to actual bus loading to minimize power and improve signal integrity. Full, 1/2 and 1/4 drive strength options
Extended Temperature Ranges: Ind. (-40°C to +85°C), Auto. (-40°C to +105°C)
High quality products to meet application requirements
Packages: BGA, PoP and KGD Small footprint(s) for space critical applications
ME
MO
RY
14
Scan barcode for more ISSI Mobile SDRAM information
For more information, including pricing, availability, datasheets and samples (if available), please visit www.nuhorizons.com/portal
15
MIC
RO
CO
NT
RO
LL
ER
S
KEY FIGURES:
Performance
Coremark score: 363.17 at 168 MHz, Coremark/MHz: 2.162
Dhrystone score: 210 at 168 MHz
Power consumption
230 μA/MHz at 168 MHz running Coremark benchmark from Flash memory (peripherals off)
1.2 V voltage regulator with power scaling capability
1.7 V4 to 3.6 V VDD
<1 μA typ RTC
High-speed data transfer
7 masters, 8 slaves on the multi AHB bus matrix
Faster peripherals
USART: 10.5 Mbit/s
SPI: 37.5 Mbit/s
ADC: 2.44 MSPS
Note: 4. 1.7 V available on all packages except the LQFP64
DEVELOPMENT TOOLS:
As for all STM32 products, a complete development tool offering is available, including the following dedicated kits.
STM32 F4 evaluation board (order codes: STM3240G-EVAL and STM3241G- EVAL3 for crypto support)
For more information, including pricing, availability, datasheets and samples (if available), please visit www.nuhorizons.com/portal
Scan barcode for more STM32 F4 Series information
STM32 F4 Series High-Performance Cortex-M4 MCU32-bit Flash MCU, 168 MHz/210 DMIPS, with DSP instructions,floating point unit and advanced peripherals.
ST is widening its target applications arena with the STM32 F4 series. Based on the Cortex-M4 core, this series opens the door to the digital signal controller (DSC) market. This extension to our STM32 product portfolio offers devices with pin-to-pin and software compatibility with the STM32 F2 series, but with more performance, DSP capability, a floating point unit, more SRAM, and peripheral improvements such as full duplex I²S, less than 1 μA RTC and 2.44 MSPS ADCs. The ARM Cortex-M4 core features built-in single-cycle multiply-accumulate (MAC) instructions, optimized SIMD arithmetic and saturating arithmetic instructions. The adaptive realtime ART AcceleratorTM combined with ST’s 90 nm technology provides linear performance up to 168 MHz, unleashing the full performance of the core. These features expand the number of addressable applications in the industrial, consumer and healthcare segments.
The STM32 F4 series includes devices with 512 Kbytes to 1 Mbyte of on-chip Flash memory, and 192 Kbytes of SRAM, and 15 communication interfaces. WLCSP (< 4.5 x 4.5 mm), LQFP64, LQFP100, LQFP144, LQFP176 and UFBGA176 packages are available.
BLOCK DIAGRAM:
2x 16-bit motor control PWM
Synchronized AC timer
Control
10x 16-bit timers2x 32-bit timers
System
51/82/114/140 I/Os
RTC/AWU
Power supply 1.2 V regulatorPOR/PDR/PVD
Internal RC oscillators32 kHz + 16 MHz
Clock control
PLL
2x watchdogs(independent and window)
Cyclic redundancycheck (CRC)
Xtal oscillators32 kHz + 4 ~26 MHz
SysTick timer
Crypto/hash processor2
3DES, AES 256
SHA-1, MD5, HMAC
Multi-AHB bus matrix
ART AcceleratorTM
16-channel DMA
True random number generator (RNG)
ARM Cortex-M4 168 MHz
Nested vector interrupt
controller (NVIC)
MPU
JTAG/SW debug/ETM
Floating point unit (FPU)
Notes:1. HS requires an external PHY connected to the ULPI interface2. Crypto/hash processor on STM32F417 and STM32F415
Analog
3x 12-bit ADC24 channels / 2.44 MSPS
2-channel 2x 12-bit DAC
Temperature sensor
Up to 1-Mbyte Flash memory
80-byte + 4-Kbyte backup SRAM
Up to 192-Kbyte SRAM
512 OTP bytes
FSMC/SRAM/NOR/NAND/CF/LCD parallel interface
Connectivity
SDIO
3x SPI, 2x I²S, 3x I²C
Camera interface
2x CAN 2.0B
1x USB 2.0 OTG FS/HS1
1x USB 2.0 OTG FS
6x USARTLIN, smartcard, IrDA,
modem control
with IEEE 1588
STM32F4DISCOVERY STM3240G-EVAL
PO
WE
R M
AN
AG
EM
EN
T
16 For more information, including pricing, availability, datasheets and samples (if available), please visit www.nuhorizons.com/portal
Evolutionary Solutions forMulti-Channel Digital PWM Step Down Controllers
FEATURES:
Pin/Function Compatible 3 and 4 Channel PWM Controllers
Gate Drive Pull Up / Down
XRP7704: 3ohm / 3ohm
XRP7708: 5ohm / 1.8ohm
XRP7740: 3ohm / 1.8ohm
XRP7714: 6ohm / 3ohm
XRP7713: 6ohm / 3ohm
XRP7724: 4ohm / 2ohm
Digital Loop Control
On Board Standby Power LDO
On Board Gate Drivers
Up to 25V Single Input Voltage
0.9V Min. Programmable Output Voltage
Independent Channel (re)Configurability
I²C Controlled
32-pin, 40-pin and 44-pin QFN Packages
APPLICATIONS:
Multi-Channel Power Supplies
Programmable Power Supplies
Audio - Video Equipments
Processors and DSP based Applications
Exar’s PowerXR ICs integrate the best of both worlds; the low cost and flexibility
of digital control as well as the robust power capabilities of high performance analog
power switches. PowerXR products reduce development time from weeks to hours,
enabling a significant time-tomarket advantage for system design engineers.
Additionally, Exar’s PowerArchitect™ is an easy to use software environment,
empowering engineers to create complex sequencing schemes, power systems,
and modify voltage, current or other parameters in seconds.
Part Number Vin Range Vout Range Gate Drive Pull Up / Down I/Q Package TypeJunction
Download our Free, IntuitiveDesign Software Tool forProgramming the PowerXR Family
Scan barcode for more information regarding Exar's Digital PWM Step Down Controllers
17
PO
WE
R M
AN
AG
EM
EN
T
For more information, including pricing, availability, datasheets and samples (if available), please visit www.nuhorizons.com/portal
LT6109 - High Side Current Sense Amplifier with Referenceand Comparators60V Current Sense Amplifier Offers Adjustable Fault Flags.
The LT®6109 is a complete high side current
sense device that incorporates a precision current
sense amplifier, an integrated voltage reference
and two comparators. Two versions of the LT6109
are available. The LT6109-1 has the comparators
connected in opposing polarity and the LT6109-2 has
the comparators connected in the same polarity. In
addition, the current sense amplifier and comparator
outputs are directly accessible. The amplifier gain
and comparator trip points are configured by external
resistors. The open-drain comparator outputs allows
for easy interface to other system components.
The combined system propagation delay of
the LT6109 is typically only 1.4μs, allowing for quick
reaction to overcurrent and undercurrent conditions.
The 1MHz bandwidth allows the LT6109 to be used
for error detection in critical applications such as
motor control. The high threshold accuracy of the
comparators, combined with the ability to latch
both comparators, ensures the LT6109 can capture
high speed events. The LT6109 is fully specified for
operation from –40°C to 125°C, making it suitable
for industrial and automotive applications.
FEATURES:
Current Sense Amplifier
Fast Step Response: 500ns Low Offset Voltage: 350μV Maximum Low Input Bias Current: 300nA Maximum
Internal 400mV Precision Reference
Internal Latching Comparators with Reset
Fast Response Time: 500ns Total Threshold Error: ±2% Maximum Two Comparator Polarity Options
Wide Supply Range: 2.7V to 60V
Supply Current: 550μA
Low Shutdown Current: 5μA
Specified for Operation from –40°C to 125°C
Available in 10-Lead MSOP Package
APPLICATIONS:
Overcurrent, Undercurrent and Fault Detection
Current Shunt Measurement
Battery Monitoring
Motor Control
Automotive Monitoring and Control
Remote Sensing
Industrial Control
Scan barcode for more LTC6910 information
Circuit Fault Protection with Latching Load Disconnect and Early Warning Indication Response to Overcurrent Event
SENSEHI SENSELO
OUTALT6109-2
INC2RESET
INC12N2700
100mA WARNING
250mA DISCONNECT
V+
EN/RST
OUTC1
OUTC2
V–
0.1Ω IRF9640
3.3V6.2V
12V
100Ω
6.04k100kk01 k26.1
1k
1k
10µF
VOUT
2.37k
1.6k
TO LOAD
5µs/DIV
VLOAD10V/DIV
VOUTC15V/DIV
ILOAD200mA/DIV
0V
0VVOUTC25V/DIV 0V
0mA
250mA DISCONNECT
100mA WARNING
FEATURES:
Pin/Function Compatible 3 and 4 Channel PWM Controllers
Gate Drive Pull Up / Down
XRP7704: 3ohm / 3ohm
XRP7708: 5ohm / 1.8ohm
XRP7740: 3ohm / 1.8ohm
XRP7714: 6ohm / 3ohm
XRP7713: 6ohm / 3ohm
XRP7724: 4ohm / 2ohm
Digital Loop Control
On Board Standby Power LDO
On Board Gate Drivers
Up to 25V Single Input Voltage
0.9V Min. Programmable Output Voltage
Independent Channel (re)Configurability
I²C Controlled
32-pin, 40-pin and 44-pin QFN Packages
LTC3618 - Dual 4MHz, ±3A Synchronous Buck Converter for DDR TerminationCapable of generating the supply voltage and the bus termination voltage for DDR/DDR2/DDR3 and future standard memory applications requiring both sourcing and sinking of current.
The LTC®3618 is a dual synchronous step-down regulator using a current mode, constant-frequency architecture. It provides a complete DDR solution with an input voltage range from 2.25V to 5.5V.
The output of the fi rst step-down regulator offers a high accuracy VDDQ supply. A buffered reference generates VTTR at 50% of VDDQIN and drives loads up to ±10mA. The second regulator generates the DDR termination voltage (VTT) equal to VTTR. Both regulators are capable of delivering ±3A of
load current at 1MHz switching frequency.
The operating frequency is externally programmable up to 4MHz, allowing the use of small surface mount inductors. 0°, 90°, or 180° of phase shift between the two channels can be selected to minimize input current ripple. For switching noise-sensitive applications, the LTC3618 can be synchronized to an external clock up to 4MHz. The LTC3618 is offered in leadless 24-pin 4mm × 4mm QFN and thermally enhanced 24-pin TSSOP packages.
FEATURES:
High Efficiency: Up to 94% Dual Outputs with ±3A Output Current Capability 2.25V to 5.5V Input Voltage Range ±1% Output Voltage Accuracy VTT Output Voltage Down to 0.5V Shutdown Current ≤1μA VTTR = VDDQIN/2, VFB2 = VTTR Adjustable Switching Frequency Up to 4MHz Internal or External Compensation Selectable 0°/90°/180° Phase Shift Between Channels Internal or External Soft-Start for VDDQ, Internal Soft-Start for VTT
Power Good Status Outputs Low Profile 4mm × 4mm QFN-24 and TSSOP-24 Packages
APPLICATIONS:
DDR Memory Termination
Supports DDR, DDR2, and DDR3 Standards
Tracking Supplies
PO
WE
R M
AN
AG
EM
EN
T
18
Scan barcode for moreinformation on LTC4270 / LTC4271
For more information, including pricing, availability, datasheets and samples (if available), please visit www.nuhorizons.com/portal
Effi ciency and Power Loss vs Load Current
LOAD CURRENT (A)
30
EFFI
CIEN
CY (%
)
POWER LOSS (W
)
90
10
1
0.1
0.01
100
20
10
80
50
70
60
40
100
0.1 10.01
VDDQ = 1.8V
VTT = 0.9V
SW1
VDDQIN
FB1LTC3618
SGND PGND
RUN1
TRACK/SS1
ITH1
PHASE
RUN2
PGOOD2
ITH2
PGOOD1
VTTR
RT
MODE/SYNC
VIN3.3V
SVIN PVIN1 PVIN2
100µF
0.01µF
SW2
FB2
1µH
47µF
VTT0.9V/±3A
1µH
47µF
VDDQ1.8V/3A
422k
210k
392k
VREF = VDDQ
2
APPLICATIONS:
DDR Memory Termination
Supports DDR, DDR2, and DDR3 Standards
Tracking Supplies
19
PO
WE
R M
AN
AG
EM
EN
T
Hyper Speed Control, SuperSwitcher II and Any Capacitor are trademarks of Micrel, Inc.MLF is a registered trademark of Amkor Technology, Inc.
Scan barcode for more SuperSwitcher II™ family information
Micrel Super Switcher II™ and Super Switcher IIG™ RegulatorsThese devices operate over an input supply range of 4.5V to 28V and provide up to 12A of output current. The output voltage is adjustable down to 0.8V with a guaranteed accuracy of ±1%.
The Micrel Super Switcher II™ and Super Switcher IIG™ families are synchronous buck regulators featuring a unique adaptive on-time control architecture. These devices operate over an input supply range of 4.5V to 28V and provide up to 12A of output current. The output voltage is adjustable down to 0.8V with a guaranteed accuracy of ±1%.
Micrel’s Hyper Speed Control™ architecture allows for ultra-fast transient response while reducing the output capacitance and also makes (High VIN)/(Low VOUT) operation possible. This adaptive tON ripple control architecture combines the advantages of fixed-frequency operation and fast transient response.
Micrel’s HyperLight Load® architecture provides the same high-efficiency and ultra-fast transient response as the Hyper Speed Control™ architecture under medium to heavy loads, but also maintains high efficiency under light load conditions by transitioning to variable-frequency, discontinuous-mode operation.
The family offers a full suite of protection features to ensure protection of the IC during fault conditions. These include undervoltage lockout to ensure proper operation under power-sag conditions, internal soft-start to reduce inrush current, foldback current limit, “hiccup mode” short-circuit protection and thermal shutdown.
FEATURES:
Input voltage range: 4.5V to 28V
6A-12A output current capability
High full-load efficiency: up to 95%
Adjustable output voltage from 0.8V to 5.5V
±1% FB accuracy
Any Capacitor™ stable - zero-to-high ESR
Power Good (PG) output
Foldback current-limit and “hiccup mode” short-circuit protection
For more information, including pricing, availability, datasheets and samples (if available), please visit www.nuhorizons.com/portal
PO
WE
R S
UP
PL
IES
20
Scan barcode for more HTK series information
LHV Industrial Power SuppliesHTK Series provides 300W-800W for wide variety of uses.
The HTK series power supplies consist of 4 power levels, 300W, 400W,
600W and 800W. The design of the HTK series mounts the heat sinks on the PCB;
because of this a chassis is not required to act as a heat sink for the unit. If space
is tight in your application then the open frame version may be your solution.
Since each application is unique, the HTK series is available in an open
frame, U-channel or enclosed versions. With standard output voltages available
from 3.3V to 54V the HTK series offers a standard off the shelf unit that will
fit most OEM applications. If more power is needed up to four units can be
connected in parallel to provide up to 3200W.
If a standard unit will not meet your power requirement, the HTK series can
be modified to provide you with what you need.
FEATURES:
Universal AC Input with Active PFC
Single Outputs from 3.3~54 VDC
Optional Single Wire Current Share
Current Monitor
Over Current / Voltage / Temp Protection
Multiple Package Options:
Open Frame
U-Frame
Covered with Fan
Parallel Configuration with up to 4 units
Connector Options Include:
Quick-Connect / Molex Connections
Terminal Block Connections
IEC-320 Inlet
Switch
Euro Strip Connections
Status & Control Signal Include:
Remote on/off Control
Power Good
LED Power-On Indicator
Inhibit
700k hours MTBF per Belcore SR-332
International Safety Approvals & CE Mark
APPLICATIONS:
Industrial automation
Servers
Test equipment
Controllers
Switches
Gaming systems
Security and surveillance systems
HTK300/400 SERIES:
300 & 400 Watt Models
Open Frame Measures 3.7 x 6.7 x 1.75”
U-Frame measures 6.70 x 4.00 x 2.00”
Enclosed with Fan measures 8.00 x 4.00 x 2.00”
HTK600/800 SERIES:
600 & 800 Watt Models
Open Frame measures 7.87 x 4.13 x 2.01”
U-Frame measures 7.87 x 4.33 x 2.50”
Enclosed with fan measures 9.17 x 4.30 x 2.50”
For more information, including pricing, availability, datasheets and samples (if available), please visit www.nuhorizons.com/portal
UL60950-1H
EN60950-1 IEC60950-1 L.V.D.
21
PR
OG
RA
MM
AB
LE
LO
GIC
For more information, including pricing, availability, datasheets and samples (if available), please visit www.nuhorizons.com/portal
Scan barcode for more LatticeEC3P information
IP Suites for LatticeECP3™The Perfect Balance of Performance and Price.
Lattice IP Suites are economical packages of IP cores that allow designers to conveniently obtain critical functions for their applications. The suites offer ready-made building-blocks for solving a variety of problems, such as high-speed data transfer, Ethernet networking, high-speed memory interfaces, signal processing, video pixel processing, etc. These comprehensive IP Suites empower design engineers to quickly build leading-edge wireline, wireless, embedded, industrial, compute, video and display, and consumer systems. Design engineers can evaluate all cores within an IP Suite using the IPexpress™ tool within Lattice Diamond™ design software.
PRICING AND AVAILABILITY:
Lattice is offering a limited quantity of specially priced IP Suites to encourage new, qualified design engineers to build their next generation systems with LatticeECP3 FPGAs. The LatticeECP3 FPGA is the best-in class FPGA in the industry, with high-caliber SERDES, full-featured DSP blocks, and state-of-the-art DDR3 memory support. The limited number of IP Suite licenses are available for a promotional first year subscription of only $99 each.
IP Suite Description Included LatticeCORE™ IPList
PricePromo Price*
Part #
ValueDDR3 memory interfaces, Tri-speed Gigabit Ethernet MAC and common DSP Functions.
• DDR3/DDR2/DDR Memory Controller• FFT Compiler• FIR Filter Generator• Triple Speed 10/100/1G Ethernet MAC
$995 $99 DS-VALST-U1
PCI ExpressHigh-speed data transfer in industrial and computing systems using PCI Express.
Popular solutions for video and display applications.
• 2D FIR Filter• Color Space Converter• Edge Detector• Gamma Corrector• Median Filter• Tri-rate SDI PHY• Scaler
$995 $99 DS-VDSST-U1
* Limited quantity and limited time offer. Offer valid until availability of limited promotional licenses are depleted or December 31, 2011.
22
Mic
roco
ntro
ller M
atrix
Arch
itect
ure
Mem
ory
Perip
hera
ls
Gene
ral /
Spe
cial
Pur
pose
Bits
(8/1
6/32
)Pi
ns
(Min
to M
ax)
Spee
d(M
ax)
Prog
ram
Mem
ory
(Min
to m
ax, T
echn
olog
y)SR
AM(M
ax)
Seria
lCh
anne
ls (M
ax)
Tim
ers
(Max
)Sp
ecia
l Int
erfa
ce
Atm
el
tin
yAVR
Gene
ral P
urpo
se8
6-32
pin
s20
MHz
0.5
– 8K
B Fl
ash
512B
32
(8bi
t), 1
(16b
it)No
m
egaA
VRGe
nera
l Pur
pose
828
-100
pin
s20
MHz
4-25
6KB
Flas
h4K
B6
2 (8
bit),
4 (1
6bit)
No
AV
R Xm
ega
Gene
ral P
urpo
se8
to 1
644
-100
pin
s32
MHz
16-3
84KB
Fla
sh4K
B16
4 (8
bit),
4 (1
6bit)
No
AV
R UC
3Ge
nera
l Pur
pose
3248
- 1
4466
MHz
16-5
12KB
Fla
sh12
8KB
2310
(16-
bit)
FPU,
ETH
, CAN
, LIN
, USB
, DM
A
SA
M3
Gene
ral P
urpo
se32
48-1
4496
MHz
64KB
to 2
56KB
Fla
sh52
KB10
8 (1
6bit)
USB
SA
M7
Gene
ral P
urpo
se32
48-1
4455
MHz
16k
- 51
2k F
lash
64KB
66
(16b
it)US
B
SA
M9
Gene
ral P
urpo
se32
208-
217
180M
hz12
8-51
2k F
lash
32KB
118
(16b
it)US
B
Digi
Ra
bbit
16 b
itGe
nera
l Pur
pose
1612
8-29
255
MHZ
- 2
00 M
HZ1
MB
DRAM
32KB
610
(8bi
t), 1
(10b
it), 1
(16b
it)
USB
AR
M 3
2 bi
tGe
nera
l Pur
pose
3217
7-26
575
- 15
0 M
HZ4M
B Fl
ash,
8M
B SD
RAM
NA6
10 (3
2 bi
t)No
Latti
ce
M
ico8
*SP:
Sof
t IP;
FPG
A8
67-5
8610
0MHz
256K
B Fl
ash
256K
BPr
ogra
mm
able
Prog
ram
mab
leUS
B, E
NET
M
ico3
2*S
P: S
oft I
P; F
PGA
3267
-586
154M
Hz25
6KB
Flas
h16
KB C
ache
Prog
ram
mab
lePr
ogra
mm
able
USB,
ENE
T
Mar
vell
AR
MAD
A*S
P: C
omm
unic
atio
ns32
NA1.
2 GH
zEx
tern
alEx
tern
al6
NAUS
B
AR
MAD
A XP
*SP:
Com
mun
icat
ions
32 (1
, 2 o
r 4 C
ore)
NA1.
6 GH
z / C
ore
Exte
rnal
Exte
rnal
5NA
USB,
PCI
e, E
TH, S
ATA,
SER
DES
KI
RKW
OOD
*SP:
Com
mun
icat
ions
32 (1
or 2
Cor
e)NA
1.2
GHz
Exte
rnal
Exte
rnal
5NA
USB,
PCI
e, E
TH, S
ATA,
LCD
PX
A27x
/PXA
3xx
*SP:
Com
mun
icat
ions
32NA
806
MHz
Exte
rnal
768K
BNA
NAUS
B
PX
A90x
/PXA
920
*SP:
Cel
lula
r32
NA1G
Hz32
Mbi
t Fla
sh2M
bit
NANA
USB
DI
SCOV
ERY
INNO
VATI
ON*S
P: C
omm
unic
atio
ns32
(1 o
r 2 C
ores
)NA
1.2
GHz
Exte
rnal
Exte
rnal
NANA
VFP,
USB,
PCI
e, E
TH, S
ATA
Mic
rel
KS
Z869
5x*S
P: E
net S
witc
h w
ith A
RM9
CPU
32NA
166
MHz
Exte
rnal
Exte
rnal
NANA
ENET
KS
Z869
2x*S
P: E
net S
witc
h w
ith A
RM9
CPU
32NA
250
MHz
Exte
rnal
Exte
rnal
NANA
ENET
KS
Z969
2x*S
P: E
net S
witc
h w
ith A
RM9
CPU
32NA
250
MHz
Exte
rnal
Exte
rnal
NANA
ENET
Nord
ic
nR
F24L
E1*S
P: 2
.4GH
z RF
Cor
e w
/ int
egra
ted
MCU
824
- 4
816
MHz
16 K
B1
KB4
4 (1
6-ni
t)
nR
F800
1*S
P: B
luet
ooth
with
inte
grat
ed M
CUNA
NA16
MHz
NANA
2NA
*
* The
nRF
8001
offe
rs a
ser
ial i
nter
face
(ACI
) for
con
figur
atio
n an
d co
ntro
l fro
m y
our m
icro
cont
rolle
r. Th
is m
icro
cont
rolle
r is
refe
rred
to a
s th
e “a
pplic
atio
n pr
oces
sor”
.
23
Arch
itect
ure
Mem
ory
Perip
hera
ls
Gene
ral /
Spe
cial
Pur
pose
Bits
(8/1
6/32
)Pi
ns
(Min
to M
ax)
Spee
d(M
ax)
Prog
ram
Mem
ory
(Min
to m
ax, T
echn
olog
y)SR
AM(M
ax)
Seria
lCh
anne
ls (M
ax)
Tim
ers
(Max
)Sp
ecia
l Int
erfa
ce
Nuvo
ton
AR
M7
Gene
ral P
urpo
se32
48-1
7680
MHz
6KB
ROM
32KB
94
(16b
it)US
B
AR
M9
Gene
ral P
urpo
se32
128-
324
200
MHz
8KB
Cach
e8K
B Ca
che
115
(24b
it), 4
(16b
it)US
B
80
C51
Gene
ral P
urpo
se8
40 -
100
20 M
Hz64
KB
Flas
h25
6 +
1 K
B1
3 (1
6-bi
t)80
52 C
ompa
tible
Nu
Mic
roGe
nera
l Pur
pose
3233
-48
50 M
Hz8-
512K
B Fl
ash
ROM
64KB
94
(32b
it)US
B, C
AN, L
IN, E
TH
Rene
sas
RL
78Ge
nera
l Pur
pose
820
-128
32M
Hz16
-512
KB F
lash
32K
B10
16 (1
6bit)
No
78
KGe
nera
l Pur
pose
810
-100
24M
Hz4-
512K
B Fl
ash
30KB
52
(16b
it), 4
(8bi
t)US
B
R8
CGe
nera
l Pur
pose
1620
-80
20M
Hz8-
128K
B Fl
ash
10KB
52
(8bi
t), 5
(16b
it)US
B
RX
Gene
ral P
urpo
se16
64-1
0020
0MHz
256K
B-2M
B Fl
ash
256K
B12
4 ( 8
bit)
, 12
(16b
it)US
B
V8
50Ge
nera
l Pur
pose
3240
-144
32M
Hz16
-102
8KB
Flas
h80
KB7
11 (1
6bit)
USB
M
16C
Gene
ral P
urpo
se16
80-1
4416
-32M
Hz48
-768
KB F
lash
63KB
911
(16b
it)CA
N, P
OR, P
WM
, CRC
H8
SGe
nera
l Pur
pose
1664
-176
20M
Hz64
-102
4KB
Flas
h2-
40KB
36
(8bi
t), 4
(16b
it)KB
D, L
PC, P
S2, 5
V I/O
H8
SXGe
nera
l Pur
pose
3210
0-14
450
MHz
384-
1024
KB F
lash
40-5
6KB
64
(8ib
t), 1
2 (1
6bit)
USB
Devi
ce, L
CD
SH
tiny
Gene
ral P
urpo
se32
48-6
450
MHz
64-1
28KB
Fla
sh8K
B3
8 (1
6bit)
MTU
2, C
MT
SH
2Ge
nera
l Pur
pose
3280
-176
80-1
33M
Hz64
-512
KB F
lash
32KB
411
(16b
it)M
TU, C
MT,
MM
T, C
AN, A
UD
SH
-2A
Gene
ral P
urpo
se32
144-
240
200M
Hz51
2KB
32KB
82
(8bi
t), 6
(16b
it)M
TU2,
CAN
, FPU
, SSI
, SDR
AM
SH
-4
Gene
ral P
urpo
se32
208-
449
240M
Hzno
ne (M
MU/
uP)
16KB
34
(16b
it), 6
(32b
it), 1
WDT
USB
HOst
, LCD
, AC9
7, P
CMCI
A
SH
-4A
Gene
ral P
urpo
se32
436-
449
600M
Hzno
ne (M
MU/
uP)
152K
B6
4 (1
6bit)
, 6(3
2bit)
, 1 W
DTCM
T, N
AND,
PCM
CIA,
DDR
, FPU
R3
2CGe
nera
l Pur
pose
3264
-144
50-1
00M
Hz25
6-10
24KB
Fla
sh63
KB9
11 (1
6 bi
t)CA
N, F
PU, W
DTO
Rohm
/Oki
AR
M7T
DMI
Gene
ral P
urpo
se32
144
33 M
Hz51
2KB
ROM
128K
B7
4 (1
6 bi
t)US
B
AR
M94
6EGe
nera
l Pur
pose
3227
212
0 M
Hz51
2KB
ROM
128K
B4
4 (1
6 bi
t)US
B
STM
icro
elec
tron
ics
ST
M32
F (F
1 / F
2 / F
4)Ge
nera
l Pur
pose
3248
-176
168M
Hz16
-102
4KB
Flas
h19
2KB
1812
(16b
it), 2
(32
bit)
FPU,
USB
, CAN
, CRY
PTO,
ENE
T
ST
M32
WGe
nera
l Pur
pose
3218
-24
24M
Hz4-
128K
B Fl
ash
8KB
22
(16
bit),
1 (3
2 bi
t)ZI
GBEE
ST
M32
LGe
nera
l Pur
pose
3248
-100
32M
Hz65
-128
KB F
lash
16KB
88
(16
bit),
1 (3
2 bi
t)US
B, C
ompa
rato
r, LC
D
ST
M8L
Gene
ral P
urpo
se8
20-8
016
MHz
4-64
KB F
lash
4KB
64
(16b
it)No
ST
M8S
Gene
ral P
urpo
se8
20-8
016
MHz
4-12
8KB
Flas
h6K
B5
3 (1
6bit)
No
ST
M8A
Gene
ral P
urpo
se8
32-8
024
MHz
8-12
8KB
Flas
h6K
B6
3 (1
6bit)
No
Vite
sse
Ja
guar
-1 /
LynX
-1 (V
SC74
6x)
*SP:
Ene
t Sw
itch
with
MIP
S M
CU32
NA41
6MHz
Exte
rnal
2Mb
Queu
e3
NAEN
ET
Sp
arX-
G8 (V
SC73
88)
*SP:
Ene
t Sw
itch
with
805
1 M
CU8
NANA
Exte
rnal
NANA
NAEN
ET
G-
Roc
X (V
SC75
01)
*SP:
Ene
t Sw
itch
with
ARM
9 CP
U32
NA20
0 M
HzEx
tern
alNA
NANA
ENET
*
SP: S
peci
al P
urpo
se
24
Boar
d Le
vel D
C-DC
Con
vert
ers:
Pow
er S
uppl
ies
/ Mod
ules
Mat
rixIn
put V
olta
geOu
tput
Vol
tage
Amps
/Wat
tsSi
ze (m
m)
Isol
ated
Line
age
Pow
er
St
ingr
ay36
-75V
3.3V
15A
57.9
x 2
2.8
x 8
.52
Yes
Ba
racu
da36
-75V
12V
25-3
3A58
.4 x
36.
8 x
11.
7 Ye
s
Or
ca36
-75V
48V
14A
57.7
x 6
0.7
x 1
2.7
Yes
Pr
oLyn
x9-
36V
3-18
V15
.-5A
20.3
x 1
1.4
x 8.
5 No
Tl
ynx
2.4-
14V
.59-
5.5V
12A
33.0
0 x
13.4
6 x
8.5
No
Na
os R
apto
r4.
5V-1
4V.5
9V-6
V60
A10
.4 x
16.
5 x
7.84
to
65.5
x 3
1.8
x 11
.6
No
LHV
Pow
er
GM
A12
V or
24V
100V
- 3
kV1.
5W1.
57 x
1.4
9 x
.78”
No
A
5V -
14V
1kV
- 4k
V3W
2.5
x 1.
5 x
10.7
5”No
PP
M3
24V
100V
- 1
kV3W
3.03
x 2
.13
x .9
1”No
E
12V
or 2
4V50
0V -
3kV
5W2.
25 x
2.0
x 1
.05”
No
D
12V
or 2
4V50
0V -
7kV
10W
4.06
x 2
.06
x 1.
00 “
No
Mea
n W
ell
En
clos
ed9V
- 1
44V
5V -
24V
15W
- 1
000W
0.46
x 0
.24
x 0.
4” to
2 x
2 x
0.8
2”Ye
s
On
Boa
rd9V
- 7
2V3.
3 -
24V
5W -
60W
1.6
x 1
x .3
27”
to 1
01.6
x 5
0.8
x 30
mm
Yes
PC
B9V
- 7
2V
5V -
24V
5W -
45W
76 x
30
mm
No
M
odul
e Ty
pe5V
- 7
5V3.
3V -
24V
.5W
- 4
0W0.
46 x
0.2
4 x
0.4”
to 2
x 2
x 0
.82”
Yes
Mur
ata
Pow
er S
olut
ions
BE
I9-
36V
and
18-7
5V5,
12,1
5V15
W24
.4 x
27.
9 x
8.9
Yes
UL
S36
to 7
5V3.
3,5,
12V
66W
22.9
x 3
3.0
x 10
.16
Yes
UW
E9-
36V
and
18-7
5V5
and
15V
75W
22.9
x 5
8.4
x 9.
1Ye
s
M
ER1
5V to
48V
5,9,
12,1
5V1W
19.6
5 x
6.15
x 1
0.15
Ye
s
UE
I9-
36V
and
18-7
5V3.
3,5,
12V
15W
, 30W
and
50/
60W
24.4
x 2
7.9
Yes
M
EV5V
or 1
2V5,
9, 1
2 or
15V
3W19
.65
x 7.
65 x
10.
15Ye
s
Ok
amiT
M2.
4V -
14V
0.59
-5.5
V4.
95W
From
10.
4 x
16.5
to 1
1.9
x 20
.8 x
8.6
No
Synq
or
Po
wer
Qor
18V
- 75
V1.
8, 3
.3,5
,12,
15,2
8V10
0W -
728
WFr
om 1
/8 b
rick
to fu
ll br
ick
Yes
CF
Qor
9-75
V5-
24V
105W
-150
W1/
4 br
ick
Yes
In
Qor
9-42
5V1.
2-48
V53
W-6
00W
1/4
bric
k an
d 1/
2 br
ick
Yes
Ni
Qor
3-16
V0.
75-3
.6V
58W
-120
W15
x 5
0 x
7.32
Yes
Bu
sQor
35-7
5V9.
6-12
V33
1W-6
00W
From
1/8
bric
k to
1/2
bric
kYe
s
25
Audi
o AD
C
Anal
og to
Dig
ital C
onve
rter
Mat
rix
Bits
ADCs
Inte
rfac
eAu
dio
Freq
uenc
y (K
Hz)
I2C
3 w
ireUS
BTD
MHW
4896
192
216
AKM
24
sing
le
dual
quad
Gene
ral P
urpo
se A
DC Bits
ADCs
Spee
d (s
ampl
es p
er s
econ
d- s
ps)
7.5
1530
6032
01K
4K8K
200K
450K
800K
1M1.
6M2.
8M3.
5M6M
10M
15M
25M
40M
65M
80M
105M
150M
185M
210M
250M
Exar
10du
al
8si
ngle
LTC
24si
ngle
dual
octa
l
sixt
een
20si
ngle
dual
octa
l
18si
ngle
16si
ngle
dual
octa
l
sixt
een
14si
ngle
dual
quad
octa
l
12si
ngle
dual
quad
octa
l
10si
ngle
dual
Nuvo
ton
24si
ngle
dual
ST M
icro
12du
al
Cable Solutions Quadrangle
Display Enhancement Solutions Landmark Nu Horizons Custom Solutions
Displays Emerging Display Technologies (EDT) HT Displays LG Display Optrex OSD Displays Sharp Tianma United Radiant Technology Corp. (URT)
Embedded Solutions / Single Board Computers Aaeon Axiom Tek Connect Tech Digi International IEI Technology Reach Technology
Inverters Applied Concepts ERG Microsemi
LCD Controller Solutions Amulet Technologies Digital View Estecom-USA Kordis URT
LCD Monitors Axiom Tek Estecom-USA IEI Slimage
Open Frame/Panel PC Solutions Aaeon Axiom Tek Estecom-USA IEI Technology Nu Horizons Custom Solutions Slimage
Touchscreens Hantouch Touch International
Active Enhancements: ■ Hi Bright Backlights: CCFL LED
Passive Enhancements: ■ Anti-ReflectiveAntiGlareGlass/Acrylic ■ EMI/RFIShielding ■ IR Blocking Film ■ Optical Bonding ■ PrivacyFilters ■ ProtectiveDisplayShields
Total Solutions: ■ DisplayKitVerification ■ Fully Enclosed LCD Monitors ■ Fully Enclosed LCD Systems (Panel PC’s) ■ LCD Testing and Screening ■ Medical ■ NEMA Rated Products ■ OpenFrameConfigurations ■ Rack and Panel Mount Assemblies
• Power Supplies - High Voltage (1 to 5 W, 10 to 200 W, Custom) - Low Voltage (Modular, Desktop, Wallmount, Medical, Open-Frame, U-Frame, Enclosed, LED Lighting, Custom)
• AC-DC Power Supplies (800W - 4,000W) • DC-DC Converters - Industry Standard (1/16-Brick, 1/8-Brick, 1/4- Brick, 1/2-Brick, 1x1”, 2x1”) - Intermediate Bus Converters (1/8-Brick, 1/4- Brick) - PowerAmplifiers(1/2-Brick, Full Brick) • Power & Battery Management (Power Modules) • Power Systems Engineering Services
• Data Converters (Delta Sigma, SAR, Voltage DAC, Current DAC) • Frequency Control (Silicon Timing) • Interface (RS-232, 422/485, CAN PHY) • Power Management (Switching Regulators, Linear Regulators, DC/DC µModules, LED Drivers, Hot Swap, PoE) • Signal Conditioning (Amplifiers, Comparators, Filters, Voltage References, Thermal Couple Compensators) • Wireless / RF (I/Q Modulators – Demodulators, Up & Down Converting Mixers, IF Amplifiers, PA, RF Log Detectors, RF Power Detector)
• Video (Video Encoders, Transcoders, Decoders, SoCs, Coprocessors)
• AC/DC Power Supplies (Enclosed, DIN Rail, Open Frame, LED, Modular, Rack Power, Charger, Adaptor, Specific Purpose) • DC/DC Power Supplies (Modular, On Board, PBC, Enclosed)
• Analog (Drivers / Voltage & uC Supervisors / Filters / Switches / Regulators) • Bus Device ICs (USB / PC / PCMCIA / SMBus) • Ethernet (10/100/1000 PHYs, Controllers, Switches) • Linear ICs (Active Filters / Comparators / Op Amps / References / Timers) • Power Management ICs (Battery, Display, Hot- Swap, PCI/PCIX/PCIE, High Side, LDOs, DDR) • Precision Edge ICs (Clock distribution, generation, synthesizers / Multiplexers, PLLs, buffers, CDRs) • RF (290 – 980 ISM band / ASK/FSK / 200kbps max data rate, RF Modules) • System Management ICs (Fan Control / Thermal Supervisor I2C)28
• DRAM (DDR3 SDRAM, DDR2 SDRAM, DDR SDRAM, SDRAM, RLDRAM, PSRAM) • DRAM Modules (FBDIMM, RDIMM, SODIMM, UDIMM) • Mobil DRAM (Mobil SDRAM, Mobil DDR SDRAM) • Multichip Packages (MobilDRAM & NAND Flash Combinations) • NAND Flash Memory (Managed NAND, High Speed NAND, Solid State Storage, Embedded USB)
(Formerly C&D Technologies) • AC/DC Power Supplies (200 – 2000 Watts, 2.5VDC to 48 VDC Out – PCI Modules) • Data Acquisition (Electronic Imaging, A/D Converters, D/A Converters, Sample/Hold Amplifier, Multiplexers) • DC/DC Converters (0.25 to 340 Watts, 0.02 to 80 Amps, 1.2 to 48 VDC Out; 3 to 75 VDC In) • Digital Panel Meters (Voltmeters, Wire Meters, Process Monitors, AC/DC Ammeters) • Magnetics (Inductors & Transformers, Differential common-mode filters, Databus Isolators)
• AC-DC Power Supplies (125W-375W, 3.3vdo to 56vdo, 90-264vao in, 3”, 3.3” x 5” format) • DC-DC Open Frame Power Supplies (125W, 160W, 3.3-48vdo 3” X 5” format) • Power Systems Engineering Services
• Flat Panel Displays (LCD – 2” to 65”) • Memory (Flash – NOR) • Optoelectronics (LEDs, LED Modules, Laser Diode, Photocoupler, IrDA, photo interrupters, Emitters/ Detectors, Sensors) • Power (LDO / Switching Regulators, LED Drivers, Solid State Relays)
• Digital Video Processors • Storage Products (Serial ATA - Parallel ATA, Parallel ATA Controller, RAID Storage Processors, SATA Controllers, SATA Port Multipliers) • Video Transport (HDMI, DVI and iTMDS Products - Receivers, Transmitters, Switches, PHYs)
• Controllers (Flash Memory Card Controller, USB Flash Controller) • Embedded Graphics (128-bit 2D/3D mobile graphics engine, Mobile Graphics Coprocessor) • Mobile Communication (Mobile Satellite TV Tuner IC) • Multimedia SoC (MP3/WMA Digital Audio Player, USB 2.0 Megapixal Image Controller)
• Advanced I/O Controllers (USB-ATA, Southbridge) • Data Communications (10/100 MAC/PHY Controller, 10/100PHY, Multimedia Processors, ArcNET, CircNET, USB Ethernet) • Environmental (Temperature Sensors, Fan Control) • USB Solutions (Card Reader, Flash Drive, Disk Drive, Hub, PHY)
• Power Management (AC/DC, Battery Management, DC/DC, LDO, MPU - Supervisor, PoE, VDC References, AC Switches) • Discretes (Thyristors, Diodes, FETs, Transistors) • Signal Conditioning (Comparators, Op-Amps, Clamp Diode Arrays, Crowbar Diodes, EMI Filtering) • Logic (3.3V, 5V, Translators, Gates, Switches, Port - Expansion) • Sensors (Accelerometers, Proximity, Thermal, Touch) • Interface (Smartcard) • Wireless (Bluetooth, ZigBee, GPS, RFID) • Audio (Decoders, Power Amps, Analog CPU, Digital CPU, Radio) • Image Sensor (Camera Modules, Imaging Signal Processor, CMOS Arrays) • Video (Demodulator, Decoders) • Motor Control (Controllers, Drivers, MCU’s) • Microcontrollers (8-bit, 16-bit, ARM7TDMI, ARM926E, Cortex M3)
• Optoelectronics (LED Drivers, EL Lamp Drivers) • Power (Switching, Automotive, PFC, Backlight, LDO, High Voltage Interface / Driver’s, PoE) • Transducers (Ultrasound)
• AC/DC Power Supplies (Industrial and Medical - 300W - 1500W) • DC/DC Converters - Industry Standard (1/8-Brick, 1/4-Brick, 1/2- Brick, Full Brick) - Non-Isolated Point of Load - Intermediate Bus Converters (1/8-Brick, 1/4- Brick, 1/2-Brick)
• Connectivity (FEC, Framers, Mappers, Switches, TSI) • Ethernet Switching (10/100/1G/10G PHYs and MACs, Switches and Transceivers) • Transport Processing (PMDs [Laser Drivers, TIAs, Post-Amplifiers], 10/100/1G/10G PHYs PHYs, Crosspoint Switches, and Signal Integrity Devices)
POWER SUPPLIESAC-DC Low Power LHV PowerMean WellMurata Power SolutionsN2PowerZippyMedium Power LHV Power Mean Well Murata Power SolutionsN2PowerSynQorZippy
High Power LHV Power Lineage PowerMean Well ZippyFront End LHV Power Lineage Power Mean Well Murata Power SolutionsZippyMedical LHV Power Mean Well SynQorZippy
DC-DC Industrial Isolated / Industry Standard Bricks /Non-Isolated Point of LoadLHV Power Lineage PowerMean WellMurata Power SolutionsSynQor
Open FrameLHV Power Mean Well N2PowerZippy
Board Level ModulesIntermediate Bus ConvertersLineage Power Murata Power SolutionsSynQor
Memory & Processor PowerMurata Power Solutions
InfraredSharp Microelectronics
LasersFinisar
LED DisplaysOptrexMurata Power Solutions
LED Arrays / ModulesSharp Microelectronics
LEDs / Laser DiodesSharp Microelectronics
Optical SystemsCELFinisar
OptoCouplersCELSharp Microelectronics
OPTOELECTRONICS
30
8-BitAtmelISSILattice (soft processor)NordicNuvotonOki/RohmRenesas ST
LabCam delivers online training opportunities in a way that recognizes the value of engineers’ time. As easily as You Tube® videos, engineers can quickly load and watch videos from industry leaders consisting of insights on products, evaluation kit overviews, end-user applications and more. Each tutorial is up to ten minutes in length and features technology experts, CEOs and/or peers introducing new solutions or explaining integral aspects of an important product, solution or application. This free value-added program is packaged for short, informative and high quality distance learning.
Nu Horizons is proud to present our education and training program, which offers engineers the opportunity to participate in technical seminars conducted by experts focused on the latest technologies from our leading suppliers. This program provides higher velocity learning to help minimize start-up time to quickly begin your design process utilizing the latest development tools, software and products. Check online for the latest seminar schedule.
In order to simplify the design process, Nu Horizons has created a series of application notes designed to guide engineers through the process of interfacing different devices together. Using a detailed step-by-step approach, these design guides identify key elements in the design process. Topics in the application notes are organized by design task and each topic is a stand-alone section, with a short introduction or overview, followed by the step-by-step design guidelines. All steps include a sufficient level of detail to provide the designer with relevant information to proceed quickly and easily from start to finish.
Nu Horizons offers a wide range of development / evaluation boards, tools and kits featuring the latest technology from the most trusted suppliers in the industry. Visit the development tool section of our website for a variety of solutions all aimed at providing a low-cost solution for designers to accelerate a product’s time-to-market.
www.nuhorizons.com/labcam
www.nuhorizons.com/seminars
www.nuhorizons.com/appnotes
Application Notes
DevelopmentTools
www.nuhorizons.com/devtools
Portal is a quarterly publication containing new products, technologies and development tools available from Nu Horizons leading suppliers. Portal is availabe both in print and on the web. Sign up online to receive your copy, be notified of upcoming issues or to request samples of the products found inside.
www.nuhorizons.com/portal
Enhance Your Design...wITH NU HORIzONS EDUCATION AND DEVELOPmENT SOLUTIONS
