Nu Horizons Q1 2012 Edition of Portal

Q1 2012Americas Edition

illuminating a new world with LEDs.

See page 11

In ThIs Issue:

Your Gateway

to Today’s Leading

Technology Products

DEVELOPmENT TOOLSLattice

DISPLAYSPervasive DisplaysSharpTouch Revolution

EmBEDDED SYSTEmSiEi Technology

INTERFACEExar

LED LIGHTINGSamsung LED

mEmORYAtmel

mICROCONTROLLERSRenesas

mICROPROCESSORSmarvell

POwER mANAGEmENTLinear TechnologyRenesasSynQor

POwER SUPPLIESN2Power

PROGRAmmABLE LOGICLattice

TImINGmicrel

18.5 Million Power Cycles, Zero Failures µModule Power Products

Info

, LT, LTC, LTM, Linear Technology, the Linear logo and µModule are registered trademarks of Linear Technology Corporation. All other trademarks are the property of their respective owners.

Resembling a surface mount IC, µModule® power products are complete system-in-a-package solutions for DC/DC point-of-load regulation, LED illumination and battery charging. With over 40 products, this family addresses a wide range of requirements: 1.5V to 60V input, 0.6V to 34V and 100mA to 15A output, up to 6 outputs, for buck, buck-boost, inverting topologies and current regulators for LED driving, as well as multichemistry and multicell battery charging from 36V input supplies. In addition, some devices are certified to EN55022 class B.

www.linear.com/products/umodule

1-800-4-LINEAR

Proven, Simple and Robust

TechClips

www.linear.com/umodule/reliability

Reliability Report

www.linear.com/umodule/techclips

PO

RTA

L C

ON

TE

NT

S

Nu Horizons Electronics is a leading

distributor of advanced technology

semiconductor, display, illumination,

power, system and telecommunication

solutions to a wide variety of commercial

original equipment manufacturers

(OEMs) and electronic manufacturing

services providers (EMS).

With sales facilities in 45 locations

across North America and Asia and

regional logistics centers throughout

the globe, Nu Horizons partners with

a limited number of best-in-class

suppliers to provide in-depth product

development, custom logistics and

life-cycle support to its customers.

Need more information right away?

Just use your smartphone to scan the barcodes throughout this publication and you'll link to more detailed information.

Note: You will need a QR Code Reader downloaded to your phone (i-nigma is free).

All registered trademarks displayed in this publication constitute the intellectual property of their respective holders. The technical information within this publication has been provided by Nu Horizons' suppliers. Nu Horizons does not assume any liability for its accuracy. Prices are subject to change without notice.

APPLICATION NOTES

Axiomtek, OptrexDesign Considerations for a Point of Sales Terminal using Single Board Computers and LCD Displays

4

DEVELOPMENT TOOLSLattice Semiconductor LatticeXP2 Brevia2 Development Kit 5

Lattice Semiconductor MachXO2 Breakout Board 5

FEATURED COMPONENTS

DisplaysPervasive Displays — New 2.0" ePaper Demo / Development Kit

6

DisplaysSharp — Display more content – and use less power with Sharp Memory LCDs

7

Embedded SystemsiEi Technology — 15.6" Wide Modular Expansion Panel PC

9

InterfaceExar — RS-232/RS-485/RS-422 Transceiver with Internal Termination

10

LED Lighting Samsung LED — LED Lighting Solutions 11

MemoryAtmel — ATSHA204 – CryptoAuthentication™ Family of Hardware Security Solutions

12

Microcontrollers Renesas — RL78 Microcontrollers 13

MicrocontrollersRenesas — RX210 MCUs for High-performance, Power-efficient Applications

14

Microprocessors Marvell — Quad-Core ARMADA XP Series SoC 15

Power ManagementLinear Technology — LTC6946 - Ultralow Noise and Spurious 0.37GHz to 5.7GHz Integer-N Synthesizer

16

Power ManagementLinear Technology — LTC2369 - 18-Bit, 1.6Msps, Pseudo-Differential Serial SAR ADC

17

Power ManagementRenesas — Wide Range of Packages Meet Every Engineer's Need

18

Power ManagementSynQor — Next-Generation, Rugged Isolated DC-DC Converters

19

Power Supplies N2Power — XL375 CC - 260 Watts without Fans 20

Programmable LogicLattice Semiconductor — The Lowest-Power Serdes-Capable FPGA in the Industry

21

Timing Micrel — ClockWorks™ Flex Family 22

ADVERTISEMENTSLinear Technology µModule Power Products 2

Touch Revolution World Leader in Projected Capacitive Touch 8

Samsung LED / Nu Horizons Innovative Lighting Solutions 23

Nu Horizons Supplier Matrix Clock Generators 24

Nu Horizons Supplier Matrix Crystals and Oscillators 25

Nu Horizons Supplier Matrix Clock Distribution - Fanout / Delay / Skew Control 26

Nu Horizons Supplier Matrix Real Time Clocks 26

Nu Horizons Supplier MatrixPOL Power: Discrete DC-DC Regulators and Modules; AC-DC PFC Controllers

27

Nu Horizons Supplier Matrix Board Level DC-DC Converters: Power Supplies / Modules 28

Nu Horizons Supplier Matrix System Power: AC to DC Supplies 29

Nu Horizons Display Technologies Line Card 30

Nu Horizons Embedded Solutions / Single Board Computers 31

Nu Horizons Semiconductor Technologies Line Card 32-35

Nu HorizonsEnhance Your Design...With Nu Horizons Education and Development Solutions

36

Design Considerations for a Point of Sales Terminal using Single Board Computers and LCD Displays

Introduction

Many embedded applications require a complete set of system

features that can be easily addressed by using board level building blocks.

In particular, Single Board Computers (SBCs) have all of the hardware

required to implement a wide set of applications. In addition, the availability

of complete embedded Operating Systems (OS’s) and Real Time OS’s

(RTOS’s) provide a well understood programming environment that allows

the designer to focus on the key elements of the application. The underlying

hardware drivers, file systems, resource allocation functions and system

protocols need not be implemented by the designer, but simply used as

function calls from the higher level applications interface.

To better understand the high level design considerations when

using SBCs as system building blocks it is best to look at an example

design. By observing some of the major requirements, constraints and

trade-offs, during the architecture definition, component selection and

hardware/software integration process we will be able to identify common

design considerations that will apply during a wide range of SBC-based

implementations.

In this paper we will look in detail at the design requirements of a Point

of Sales (PoS) terminal, like that used in a small grocery or convenience

store. The terminal must be able to accurately scan items, determine prices

(perhaps based on weight), assist with inventory management, process

payment, and provide security and cashier oversight. Reliability will be a

key consideration along with power consumption and form factor. A detailed

list of requirements will be developed in the Application Description section

so that trade-off options can be highlighted in the Component Selection

section.

Key components for the design will include the SBC, peripheral boards,

LCD panel and power system. A variety of SBC and LCD vendors will be

considered in the product selection section, but a specific SBC and LCD

panel will be used for the software and hardware integration design

considerations section.

The topics covered in this application note include the following:

1) Application Description

2) Component Selection

a. Single Board Computers

i. Single Board Computer Options b. LCD Displays

i. Functional Overview

ii. LCD Display Options

3) System Considerations

a. Software

b. Hardwrare

4) Summary and References

A significant amount of supporting documentation is listed in the reference

section at the end of this application note, making it easy to locate

additional information. To download the complete application note, please

scan the barcode below or visit the application notes section of the Nu

Horizons website.

Scan barcode to access complete application note

4 Nu Horizons offers a wide range of application notes and white papers. For more information, please visit www.nuhorizons.com/application_notes

AP

PL

ICA

TIO

N N

OT

ES

Figure 1: A Single Board Computer with Microsoft Embedded OS suitable for POS Applications

MachXO2 Breakout Board The MachXO2 Breakout Board, an easy-to-use platform for evaluating and designing with the MachXO2-1200ZE PLD. Along with the board and accessories, this kit includes a pre-loaded demonstration design. You may also reprogram the on-board MachXO2-1200ZE device to review your own custom designs.

Development Kit Features:

MachXO2-1200ZE Breakout Board MachXO2-1200ZE PLD (LCMXO2-1200ZE-1TG144C) USB mini-B connector for power and programming Eight LEDs 60-hole prototype area Four 2x20 expansion header landings for general I/O, JTAG, and external power 1x8 expansion header landing for JTAG 3.3V and 1.2V supply rails Pre-loaded Demo – The kit includes a pre-loaded counter design that highlights use of the embedded MachXO2-1200ZE oscillator and programmable I/Os configured for LED drive USB Connector Cable – The board is powered from the USB mini-B socket when connected to a host PC. The USB channel also provides a programming interface to the LCMXO2-1200ZE JTAG port

Nu Horizons offers a wide range of development / evaluation boards, tools and kits. For more information, please visit www.nuhorizons.com/development

Scan barcode for more information regarding the MachXO2 Breakout Board

5

DE

VE

LO

PM

EN

T T

OO

LS

LatticeXP2 Brevia2 Development Kit The LatticeXP2 Brevia2 Development Kit is an easy-to-use, low-cost platform for evaluating

and designing with LatticeXP2 FPGAs. The kit offers free design tools, reference designs, and a small

form-factor evaluation board.

LatticeXP2™ is an instant-on, secure, small-form-factor FPGA with a versatile development

platform for quick launch of design initiatives and rapid time-to-market. LatticeXP2 devices are

based on Lattice’s unique flexi-FLASH™ architecture that combines a 4-input Look-up Table (LUT)

based FPGA fabric with non-volatile Flash cells for on-chip storage of design data. The flexiFLASH

architecture provides distributed and embedded memory, enhanced sysDSP™ blocks, Phase

Locked Loops (PLLs), and pre-engineered source synchronous I/Os.

Using the preloaded Brevia2 system-on-chip (SoC) design provided with the development kit,

you can now test within minutes SPI, UART and SRAM interfaces in addition to the 8-bit LatticeMico8

microcontroller. You can then build your own designs using the free downloadable source code for

28 reference designs, available in both VHDL and Verilog HDL formats. The easy-to-use Brevia2

Development Kit empowers designers to quickly build systems using readymade-blocks and

implement them in less than an hour. The board can be controlled by a menu driven interface via

terminal programs running on a host PC.

Scan barcode for more information on the LatticeXP2 Brevia2 Development Kit

Development Kit Contents:

LatticeXP2 FPGA: LFXP2-5E-6TN144C 2 Mbit SPI Flash Memory 1 Mbit SRAM On-board USB controller for JTAG programming (FTDI - FT2232H) 2x20 and 2x5 Expansion Headers Push buttons for General Purpose I/O and Reset 4-bit DIP Switch for user-defined inputs 8 Status LEDs for user-defined outputs USB Mini Cable

For more details, visit the Lattice Breakout Board Evaluation Kits Web Page – www.latticesemi.com/breakoutboards for the latest documentation and drivers for the kit. In addition, a user’s guide is available that includes demo operation, programming instructions, top-level functional descriptions of the Breakout Board, descriptions of the on-board connectors, and a complete set of schematics.

DIS

PL

AY

S

6

New 2.0" ePaper Demo / Development KitPervasive Displays develops a broad range of ePaper displays for commercial & industrial solution providers worldwide.

Pervasive Displays 2.0" demo kit allows you to see the unique benefits and ROI of

electronic paper modules. The multi-functional 2.0" electronic paper development kit

features three operation modes:

Standalone Mode: Battery powered slide show of images preloaded through USB:

Slide show of up to 4 pre-loaded images

Images preloaded through USB interface

Allows for 10 hours of continuous operation

Battery rechargeable through USB

USB Mode: Allows writing images directly to the display with a PC:

PC Software (Java) included

Development mode: Configuration for easy integration into your embedded system:

SPI interface

Display fully accessible via SPI for fast start of system integration

Separate display controllers available with the same interface

In addition to the 2.0" demo kit, Pervasive Displays offers a wide range of ultra-low-power

displays and supporting electronics to enable the most innovative new commercial display

applications. Utilizing advanced, high-resolution ePaper technology, PDi delivers displays that provide

a low-power, easy-to-read, rugged alternative to conventional technologies such as LCD, EL, VF and

others. PDi offers the ideal solution if you're looking for a wireless industrial display with indoor/

outdoor readability that will last for years without changing the battery.

APPLICATIONS:

Electronic shelf label

Low-power portable devices

Logistics

Industrial manufacturing

Kanban

Factory automation

Wireless industrial digital display

FEATURES:

Ultra low power consumption for a digital display

Paper-like dot-matrix displays

Wireless, battery-powered electronic paper display networks capable of receiving and displaying complex, up-to-date information from a centralized remote source

Kit also supports 1.44” & 2.7” displays

BENEFITS:

Low power consumption reduces operational cost, lengthens battery life, and improves a product's overall environmental rating

Unmatched readability and viewing angle, even in direct sunlight and high ambient light

Information is dynamic and can change as often as desired, ensuring accuracy and uniquely supports exception managements

Scan barcode for more ePaperDemo Kit information

For more information, including pricing, availability, datasheets and samples (if available), please visit www.nuhorizons.com/portal

existing main

c24 m0 y98 k8r182 g191 b0html B6BF00pms 390

c21 m14 y14 k38r142 g144 b143html 8E908Fpms 423

ePAPER DISPLAY SIZES:

Panel Size Resolution DPI

1.44" 128 x 96 111

2.0" 200 x 96 111

2.7" 264 x 176 117

3.0" 320 x 240 133

4.41" 400 x 300 113

7.4" 480 x 800 126

10.2" 1280 x 1024 160

If you'd like to learn more about ePaper technology, check out this video on YouTube. Go to http://www.youtube.comwatch?v=eywRcE1yf5w or click on the QR code below with your smart phone.

APPLICATIONS:

Electronic shelf label

Low-power portable devices

Logistics

Industrial manufacturing

Kanban

Factory automation

Wireless industrial digital display

DIS

PL

AY

S

7

Display more content – and use less power – with Sharp Memory LCDsActive matrix technology and memory in every pixel enables small-display products with robust content and ultra-low energy consumption. Choose from a variety of sizes and specs for your compact handheld, wrist-top, and other small-screen designs.

Consumers continue to demand greater sophistication in

electronic products with small displays. Sharp's Memory LCD

technology delivers a high-contrast, high-resolution display that

allows for denser content than many types of same-sized LCDs

and eliminates many design issues inherent in yesterday's LCD

technology.

Memory LCDs feature embedded 1-bit memory in every pixel

to enable an "always on" display that uses little power, even when

updating images (only a single supply voltage is required). The

technology eliminates sweeping images and the displays’ response

time makes them fast enough to display video. A lightweight, two-

glass design, plus an integrated driver in the panel and 3-wire SPI

serial interface (SI, SCS, SCK) provides a thin module that's easily

integrated into compact handheld, wrist-top, and other small-screen

devices - essentially any product that uses a battery.

Sharp offers Memory LCDs in both Silver Metallic Polymer

Network Liquid Crystal Modules (PNLC) and Clear Monochrome HR-

TFT Modules (availability varies by size). Available sizes include 1.26-

inch, 1.35-inch, 2.7-inch and 6.0-inch. The 4.4-inch Memory LCD

will enter mass production in approx. Q2 2012.

APPLICATIONS:

E-book readers

Mobile phones

Tablet computers

Remote controls

Performance devices

Fish finders

Smart utility meters

Medical devices

Wristwatches

White goods

Retail tags

Any product with a battery

BENEFITS:

Ultra-low power consumption

Long battery life

“Always on” display

Memory in every pixel

Active matrix technology

No “ghosting”

High contrast

High resolution

Scrolling text and video

Lightweight

3-wire SPI serial interface

Backed by Sharp tech support

Scan barcode for more SharpMemory LCD information


If you'd like to learn more about Memory LCD technology and how it might benefit your designs, check out this video on YouTube. Go to http://youtu.be/b482S0jl5To or click on the QR code below with your smart phone.

9

EM

BE

DD

ED

SY

ST

EM

S

BENEFITS:

Projected Capacitive Touch Panel

6H surface “harder than steel” Glove friendly 85% transparency Multi-touch support

Rich Expansion

Module Expansion Universal USB Dongle Area Storage Area

The guiding principle behind the AFOLUX GEN II is

the ability to add expansion modules to the system

mainboard facilitating simple expansion for system

storage, PCI Express, parallel, serial and USB interface

functions.

FEATURES:

15.6" wide 1366 x 768 modular Panel PC

Diverse expansion modules ready extends the application capabilities of the AFL GEN II

Intel® Atom™ processor N270 1.6 GHz / AMD ASB L325 dual core 1.5 GHz CPU

System memory supports DDR2 SDRAM up to 4GB

Resistive touchscreen for single touch or projective capacitive touchscreen for multi-touch (Optional)

Integrated EM or Mifare RFID reader (Optional)

Built-in 1.3M pixels webcam and digital microphone

Gigabit Ethernet

WiFi 802.11 b/g/n and Bluetooth connection

Flat-bezel front panel

Front panel is IP64 compliantAPPLICATIONS:

KIOSK System

Mobile Broadcasting System

Surveillance System

Digital Signage

Information

Transportation

Automation

Monitoring System


Scan barcode for more IEI AFOLUX GEN II information

15.6" Wide Modular Expansion Panel PCModular All-In-One System, Extraordinary Outlook, Reliable Design

The AFL2-W15A front panel is IP64 compliant and its projected capacitive touch screen can be used even while wearing a hand glove. The 6H hardness anti-scratch surface is stronger than conventional touch panels and protects the screen from accidental damage.

AFL2-W15A is a 15.6” wide screen, flat-bezel front panel modular expansion panel PC. The AFL2-W15A high performance fan-less system is powered by a 1.6 GHz Intel® Atom™ N270 processor or a 1.5 GHz AMD ASB L325 dual core processor. System memory supports DDR2 SDRAM up to 4GB max. In addition to standard AFOLUX features, the AFL2-W15A system main-board has the following expansion interfaces: system storage, PCI Express, parallel, serial and USB.

The AFOLUX GEN II features two module types. Type A (75x50 mm) for a PCIe Mini card carrying module, USB 3.0 module, Giga Ethernet module or 4-channel video capture module. Type B (75 x 80 mm) is for a serial extension module. A customizable easy–to-install I/O bracket fits an array of onboard connectors. While a universal USB dongle area with changeable bracket supports different sized USB dongles. For storage, all AFOLUX GEN II models feature USB slot, CF type II slot and SATA interface storage bay.

The integrated RFID reader on the AFOLUX GEN II provides greater efficiency, while the Mifare reader has read/write capabilities for updating tag data in field. Together these make the AFOLUX GEN II an advanced interactive asset tracking and identification terminal. The AFOLUX GEN II can be customized for different purposes including digital signage, Kiosk, mobile broadcasting and surveillance applications.

Sle

w

Dir1

Dir2

Mod

e0 =

1

Mod

e1 =

1

Mod

e2 =

1

Term

InvD

ir

Ena

ble

= 1

Vcc

L1 = 1

L2

L3

L6

L7

L8

L9

Vcc

R1

T1

R2

R3

T2

R4

R2

R3

R4

R6

R7

R8

R9

120Ω

11 12 13 14 15 16 17 18 19 20

40 39 38 37 36 35 34 33 32 31

1

2

3

4

5

6

7

8

9

10

30

29

28

27

26

25

24

23

22

21

120Ω

120Ω

120Ω

All pull -downs 330kΩ

R1

V+

C2+ Vcc

C1+ C1-

C2- V

-

Vcc

C30.1µF

C2

0.1µF C1

0.1µF C40.1µF

Cc1.0µF

INT

ER

FA

CE

10

Scan barcode for more information regarding Exar's RS-232 & RS-485/422 solutions


RS-232/RS-485/RS-422 Transceiver with Internal TerminationInternally Switched Cable Termination EnablesRS-232 and RS-485/422 to Share Same Communication Lines

The SP338 and SP339 are advanced multiprotocol transceivers supporting RS-232 RS-485, and RS-422 serial standards in 40 pin QFN packages. Integrated cable termination and eight configuration modes (four modes for SP339) allow all three protocols to be used interchangeably over a single cable or connector with no additional switching components. Full operation requires only four external charge pump capacitors.

The RS-485/422 modes in the SP338 feature up to two drivers and four receivers (2TX/4RX) in half, full, and mixed duplex configurations. The RS-485/422 modes in the SP339 feature one driver and one receiver (1TX/1RX) in both half and full duplex configurations. The RS-232 mode (3TX/5RX) provides full support of all eight signals commonly used with the DB9 RS-232 connector. Both parts also feature a dedicated diagnostic loopback mode, and are pin compatible with each other.

The high speed drivers operate up to 20Mbps in RS-485/422 modes, and up to 1Mbps in RS-232 mode. All drivers can be slew limited to 250kbps in any mode to minimize electromagnetic interference (EMI).

All transmitter outputs and receiver inputs feature robust electrostatic discharge (ESD) protection to ±15kV Human Body Model (HBM) and ±8kV IEC-61000-4-2 Contact. Each receiver output has full fail-safe protection to avoid system lockup, oscillation, or indeterminate states by defaulting to logic-high output level when the inputs are open, shorted, or terminated but undriven. No external biasing resistors are required.

The RS-232 receiver inputs include a 5kΩ pull-down to ground. The RS-485/422 receiver inputs are high impedance (>96kΩ when termination is disabled), allowing up to 256 devices on a single communication bus (1/8th unit load).

The SP338 and SP339 operate from a single power supply, either 3.3V or 5V, with low idle current (2mA typical in all modes for the SP339). The shutdown mode consumes less than 10µA for low power standby operation.

FEATURES:

Pin selectable Cable Termination No external resistors required for RS-485/422 termination and biasing 3.3V or 5V Single Supply Operation Robust ESD Protection on bus pins ±15kV Human Body Model (HBM) ±8kV IEC 61000-4-2 (Contact) Max Data Rate of 20Mbps in RS-485/422 Modes and up to 1Mbps in RS-232 Modes Pin selectable 250kbps Slew Limiting 3TX/5RX RS-232/V.28 2TX/4RX RS-485/422 (SP338) 1TX/1RX RS-485/422 (SP339) Full, Half, and Mixed (SP338 only) Duplex Configurations 1/8th Unit Load, up to 256 receivers on bus RS-485/422 Enhanced Failsafe for open, shorted, or terminated but idle inputs Space saving 6mm x 6mm QFN-40 Package Pin compatible with each other

APPLICATIONS:

Dual Protocol Serial Ports (RS-232 or RS-485/422) Industrial Computers Industrial and Process Control Equipment Point-Of-Sale Equipment Networking Equipment HVAC Controls Equipment Building Security and Automation Equipment

Part Number PackageOperating

Temperature Range

SP338EER1-L QFN-40 -40°C to +85°C

SP338EER1-L/TR QFN-40 -40°C to +85°C

SP338ECR1-L QFN-40 0°C to +70°C

SP338ECR1-L/TR QFN-40 0°C to +70°C

SP339EER1-L QFN-40 -40°C to +85°C

SP339EER1-L/TR QFN-40 -40°C to +85°C

SP339ECR1-L QFN-40 0°C to +70°C

SP339ECR1-L/TR QFN-40 0°C to +70°C

SP338 Block Diagram

LE

D L

IGH

TIN

G

11For more information, including pricing, availability, datasheets and samples (if available), please visit www.nuhorizons.com/portal

Scan barcode for more information regarding Samsung LED solutions

LED Lighting SolutionsDesign all possible imagination of light to LED

Samsung LED offers high power & middle power LED Component solutions for your custom design requirements as well as pre-engineered LED Engines & Modules for faster time-to-market. Complete design solutions are also offered to increase your limited bandwidth and to allow you to reach your final production stage sooner. Samsung LED is a leading manufacturer of LED packages, and leverages their own patented technology and internal supply chain from EPI to fab to package to provide their customers with superior technology at a cost effective price.

LED ComponentsLED Packages (or LED Components) are comprised of LED Chips and electrical connections. They also enable light and heat to be dissipated from the chip. In addition, white light is created by combining a blue chip with a phosphor coating. Samsung LED Components are available for various applications such as lighting and camera flash. They are classified as Middle Power and High Power according to power consumption.

High Power LEDs:

High Efficiency/High Brightness products Excellent performance of heat emission Samsung LED's own technology Countermove to RoHS

Middle Power LEDs:

Low power consumption, miniaturization Environment-friendly light Long life span and high reliability Excellent color reproduction Quick response speed

LED Light Engines & ModulesSamsung LED provides LED light that is longer lasting, uses less power, and produces eco-friendly natural light. The LED Module/Engine is classified into Down Light Modules, Area Light Modules, LED Light Strip Modules and Street Light Engines according to the user’s needs. Samsung LED also produces comfortable lighting with various color temperatures and refined designs.

Down Light Module:

Features: High performance, High brightness RoHS compliant Eco friendly light source Meets the CCT DOE Standard Long lasting

Area Light Module:

Features: Slim design No UV emission Compliance with RoHS Eco friendly light source

Street Light Engine:

Features: High performance, High brightness Over 50,000 hours of life No emission of harmful short waves No Ultraviolet (UV) rays White light with excellent spectral luminous efficacy (5,000 K) Obtained 'IP 66', a water-proof, dust-free standard Light distribution design optimized for guard lamp/street light RoHS compliant, Eco friendly light source

Applications: Street light, Guard lamp, Flood light

Light Strip Module:

Features: High performance, High brightness Slim design Various color temperature (warm white ~ cool white)

Applications: Indoor down lights Restaurants Retail Stores Corridors

Applications: Wall lighting Wall washer Under the table lighting Showcase lighting

Applications: Flourescent replacement solution for general illumination Signage back lighting (signboard)

ATSHA204 – CryptoAuthentication™ Family of Hardware Security Solutions

Scan barcode for more information regarding Atmel CryptoAuthentication ATSHA204

ME

MO

RY

12

The Atmel® ATSHA204 is the first member of the CryptoAuthentication family of secure authentication ICs to integrate the SHA-256 hash algorithm with a 4.5-Kbit EEPROM, providing robust hardware authentication and secure key/data storage at a very cost-effective price. With the ATSHA204, developers can easily implement secure authentication and validation of physical or logical elements in virtually all microprocessor-based systems using the straightforward, 256-bit challenge/ response protocol. It is ideal for handheld electronic systems or any embedded system where space is at a premium with features such as small outline plastic packages and a single-wire interface. Implementing host-side security to provide a full system solution is now easier than ever. The Atmel ATSHA204 includes client and host security capability, offloading key storage and the execution algorithms from the MCU, significantly reducing both system cost and complexity. When using the Atmel ATSHA204 on the host, systems designers no longer need to worry about writing crypto algorithms or developing crypto protocols for their systems.


KEY FEATURES AND BENEFITS:

Multilevel hardware security

Secure authentication and key exchange

Superior SHA-256 hash algorithm

Best-in-class, 256-bit key length

High-quality hardware random number generator

Guaranteed unique serial number

4.5-Kbit EEPROM for key and data storage

High-speed I²C and single-wire interface options

1.8 – 5.5V communications

< 150nA sleep current

Secure personalization

Green-compliant plastic packages

ADVANTAGES:

High-security authentication at the lowest total system cost Single-wire interface reduces connector cost and requires fewer GPIO pins I²C interface standard in many microcontroller systems Sophisticated hardware security features

Fits in smallest systems Available small package outlines ideal for hand-held systems 3-pad contact package available for non-electronic consumables

Time-to-market ATSHA204 includes both client and host device capability, eliminating the need to write, debug, or test system crypto code Can be used with any microprocessor

APPLICATIONS:

Portable devices and accessories

Li-ion batteries

Smart meters

In-home displays

Medical devices

Set-top boxes

White goods

Atmel Ordering Code Voltage Range Interface Package Availability

ATSHA204-TSU-T 2.0 – 5.5V single-wire SOT23 Now

ATSHA204-SH-CZ-T 2.0 – 5.5V single-wire SOIC Now

ATSHA204-TH-CZ-T 2.0 – 5.5V single-wire TSSOP Now

ATSHA204-MAH-CZ-T 2.0 – 5.5V single-wire UDFN Now

ATSHA204-SH-DA-T 2.0 – 5.5V I2C SOIC Now

ATSHA204-TH-DA-T 2.0 – 5.5V I2C TSSOP Now

ATSHA204-MAH-DA-T 2.0 – 5.5V I2C UDFN Now

Atmel Ordering Code Description Interface Package Availability

AT88CK454BLACK USB dongle secure authentication demonstration kit for Atmel ATSHA204 single-wire 3-lead SOT23 Now

AT88CK101STK3 Single-socket secure authentication development kit for Atmel ATSHA204 single-wire 3-lead SOT23 Now

AT88CK101STK8 Single-socket secure authentication development kit for Atmel ATSHA204 I2C 8-lead SOIC Now

AT88CK109STK8 Dual-socket secure authentication development kit for Atmel ATSHA204 I2C 8-lead SOIC Now

ATAVRSECURITYX Atmel ATSHA204 security add-on board for Atmel AVR Xplained series I2C 8-lead SOIC Now

PRODUCT AVAILABILITY AND ORDERING INFORMATION:

TOOL AVAILABILITY AND ORDERING INFORMATION:

Atmel Ordering Code Voltage Range Interface Package Availability

ATSHA204-TSU-T 2.0 – 5.5V single-wire SOT23 Now

ATSHA204-SH-CZ-T 2.0 – 5.5V single-wire SOIC Now

ATSHA204-TH-CZ-T 2.0 – 5.5V single-wire TSSOP Now

ATSHA204-MAH-CZ-T 2.0 – 5.5V single-wire UDFN Now

ATSHA204-SH-DA-T 2.0 – 5.5V I2C SOIC Now

ATSHA204-TH-DA-T 2.0 – 5.5V I2C TSSOP Now

ATSHA204-MAH-DA-T 2.0 – 5.5V I2C UDFN Now

13

MIC

RO

CO

NT

RO

LL

ER

S

KEY FEATURES:

Ultra-low PowerRL78 MCUs maximize power savings with their exceptional flexibility, particularly in battery-operated designs. As low as 66µA per MHz and 0.31µA for LVD Multiple Operating Modes Innovative Snooze Mode Allows ADC and UART operation while in standby modes

Configurable settings to fine-tune operating voltage and speed of flash memory Clock scaling to optimize CPU and peripheral operation

Broad ScalabilityThe RL78 family’s broad scalability and fully compatible devices make it a top choice for platform designs. From 2KB to 512KB of memory and 20- to 128-pin options

High EfficiencyIndustry-leading performance is achieved through the RL78’s 16-bit CPU and optimized instruction set. 1.27 DMIPS per MHz and 1.6V to 5.5V operation Single-cycle 16x16 multiplier and 2-cycle MAC operation Up to 4 channels of DMA Barrel shifter for 1-cycle 16-bit shift-and-rotate

High IntegrationThe functions built into RL78 MCUs match the system requirements of cost-sensitive applications in the 8- and 16-bit embedded space. System Cost-saving Data Flash for data storage, 32MHz internal oscillator, internal voltage reference and temperature sensor

Sophisticated Peripherals RTC with full calendar and alarm function, multifunction 16-bit timers and communication blocks

Advanced Safety Features CRC, RAM parity-check, clock fail and frequency detection, memory protection

Extensive Ecosystem Advanced tools, third-party support, online resources


Scan barcode for more RL78 Microcontroller information

RL78 MicrocontrollersTrue Low Power Platform for 8-/16-bit Applications.

The RL78 Family of microcontrollers combines advanced low power technology, efficient performance and the broadest line-up in its class for the most demanding 8- and 16-bit applications. The platform concept of the RL78 family provides great flexibility and selection, making it easy to match device features to application requirements.

RL78 achieves the best of both worlds with low power in both active and stop modes of operation, lowering average power consumption and extending battery life.

APPLICATIONS:

Medical Industrial Automation Small Appliances Consumer Electronics Home Automation

A16-bit, 25MHz

B32-bit, 24MHz

RL7816-bit, 32MHz

25DMIPS

30DMIPS

41DMIPS

1.0 D

MIPS

/MH

z

1.25 D

MIPS

/MH

z

1.27 D

MIPS

/MH

z

1.27 DMIPS/MHz throughput

213

150

363380

66

A B C D RL78

Operating Mode

Mic

ro

-Am

ps

/MH

z

5.1

3.4

10.3

14.3

0.31

A B C D RL78

Stop Mode: LVD

Mic

ro

-Am

ps

Register to be eligible for a FREE RL78/G13 promotion board! Go to http://am.renesas.com/products/mpumcu/rl78 and click on"Try/Buy, Evaluate" to register, or click on the QR code below with your smart phone.

RX210 MCUs for High-performance, Power-efficient ApplicationsFirst Flash MCUs in the RX200 Series have the 32-bit CPU Core and Built-in Safety Functions.

RX200-series Flash MCUs bring new levels of capability and performance to ultra-low-power, low-voltage embedded-system applications. They deliver more performance using less power, and provide huge power savings with flexible low power modes.

The RX200 series is based on the fast 32-bit RX CPU core, offering high CPU performance, numerous peripherals and a wide operating voltage range from 1.62V to 5.5V. In run mode at 50MHz, the RX200 consumes only 200uA/MHz, attaining 78 DMIPS.

FEATURES:

Zero-wait 90nm Flash – 128KB to 512KB, 2KB erase block, no acceleration required, programmable at 1.62V SRAM – 8KB to 128KB, Zero-wait Data Flash – 20KB to 64KB Low Power Architecture 1.62V up to 5.5V operating voltage range 1.62 up to 20MHz (31DMIPS) 0.21mA/DMIPS 1.1uA Deep software standby (RTC on) 0.3uA Deep software standby (RTC off)

Safety Functions Clock frequency accuracy measurement circuit (CAC) Data operation circuit (DOC) Watchdog timer (WDT) Analog input disconnection detection/self-diagnosis (ADC) Cyclic redundance check (CRC)

Low Pin Count – 36 to 145 pins, QFP, LGA, QFN MPC – Selectable peripheral pin assignment Communication – SCI, I2C, SPl New System Features – Event link contoller (ELC), handles interrupts within MCU's peripherals, reducing CPU interventions

MIC

RO

CO

NT

RO

LL

ER

S

14

Scan barcode for more Renesas RX210 MCU information


Part MHz

Flas

h Si

ze

Data

Fla

sh (K

b)

VCC

(V)

RAM

(Kb)

Exte

rnal

Dat

a Bu

s

8-bi

t tim

ers

16-b

it tim

ers

Wat

chdo

g Ti

mer

s

A/D

ch

DAC

SCI

SPI

I2C

GPIO

Pack

age

type

Pin

Pitc

h

R5F52105ADFK#V0 50 128 8 1.62 5.5 20 N 4 10 2 12 2 7 1 1 48 64-LQFP 0.8mm

R5F52105ADFF#V0 50 128 8 1.62 5.5 20 N 4 10 2 14 2 7 1 1 64 80-LQFP 0.65mm

R5F52106ADFK#V0 50 256 8 1.62 5.5 32 N 4 10 2 12 2 7 1 1 48 64-LQFP 0.8mm

R5F52106ADFF#V0 50 256 8 1.62 5.5 32 N 4 10 2 14 2 7 1 1 64 80-LQFP 0.65mm

R5F52107ADFK#V0 50 384 8 1.62 5.5 64 N 4 10 2 12 2 7 1 1 48 64-LQFP 0.8mm

R5F52107ADFF#V0 50 384 8 1.62 5.5 64 N 4 10 2 14 2 7 1 1 84 80-LQFP 0.65mm

R5F52108ADFK#V0 50 512 8 1.62 5.5 64 N 4 10 2 12 2 7 1 1 48 64-LQFP 0.8mm

R5F52108ADFF#V0 50 512 8 1.62 5.5 64 N 4 10 2 14 2 7 1 1 64 80-LQFP 0.65mm

RX210 SPECIFICATIONS:

15

MIC

RO

PR

OC

ES

SO

RS


Scan barcode for more ARMADA XP Series

information

Marvell Quad-Core ARMADA XP Series SoCFor Enterprise-Class Cloud Computing Applications

The Marvell® ARMADA™ XP (Extreme Performance) series of multicore processors is the industry’s first quad-core ARM processor designed for enterprise-class cloud computing applications. The Marvell ARMADA XP employs a very low power architecture and incorporates up to four Marvell designed ARM V7 MP compliant up to1.6GHz CPU cores to deliver the best performance per watt for next generation “Green” system designs. The ARMADA XP series supports SMP (Symmetrical Multi-processing)/AMP (Asymmetrical Multi-processing) modes with hardware cache coherency and 64-bit DDR3 memory interface up to 800MHz clock rate (up to 1600Mbs data rate) to enable very high-performance system design. These devices incorporate up to 2MB L2 cache, Quad x4 PCI-express™ interfaces, multiple USB ports, Gigabit Ethernet ports, SATA, security engine and advanced power management techniques — setting new technology benchmarks for high-performance, low power and integration. With its broad offering of 3 pin compatible chips, the ARMADA XP is ideally suited for applications ranging from high-performance networking, wireless infrastructure and web servers to high volume products like NAS, home servers, laser printers and other embedded applications.

FEATURES:

Up to four high-performance CPU cores with Vector Floating Point (VFP) support 1.06Ghz to 1.6Ghz operating speed Heterogeneous multiprocessing (SMP/AMP/Mixed) with hardware- based cache coherency I/O cache coherency 32KB-Instruction (4-way) and 32KB-Data (8-way), set-associative L1 cache per core Up to 2MB shared and unified 32-way, set-associative L2 cache 64-bit DDR3/DDR3L memory interface with ECC support at up to 800MHz clock rates (1600MHz data rate) Four Gigabit Ethernet MACs with interface options (GMII/RGMII/SGMII/QSGMII) High-performance security engines Four PCI-e 2.0 ports (two x4 ports can be configured to Quad x1 – up to 16 lanes) Three USB 2.0 ports Two SATA 2.0 ports Up to 16 high speed Marvell SERDES lanes with multi functionality (PCI-e, SATA, SGMII, QSGMII) Advanced power management On-chip LCD controller, NOR, NAND, SPI, SDIO, UART, I2C, TDM interfaces, etc.

COMPREHENSIVE DEVELOPMENT TOOLS:

Marvell offers complete development platforms

for ARMADA XP series SoCs, enabling customers

to start system development without waiting for

their own hardware. Complete reference design

platforms include software drivers and board

support packages for Linux, VxWorks and BSD, to

help accelerate customer product development

cycles.

3 x USB 2.0Host/Dev

Shared L2/SRAM2MB

System Crossbar

Coherency Fabric

TDM I/F32 VoIPChannels

SecurityEngine

PacketsPre fetch

Deposit

PCI-e 2.0x4

4 x V7CPU, w/FPU

@1.6GHz

4 x GbE/QSGMII

PCI-e 2.0x4

PCI-e 2.0x4/quad

x1

PCI-e 2.0x4/quad

x1

2 x SATA II4 x IDMA4 x XOR

LCDController

AdvancedPower Mng.

SecuredBoot

Device Bus NAND, SPI,

UARTs,12C, SDIO

DDR2/DDR3Controller32/64 bits

+ ECC

16 lanes SER

DES

USB Phy x3

ARMADA XP SERIES:

MODEL MV78230 MV78260 MV78460

CPU 2 Core 2 Core 4 Core

L2 Cache 1MB 1MB 2MB

DDR2/DDR3/DDR3L 32bits+ECC 64/32bits+ECC 64/32bits+ECC

PCI-e 2.01 unit x4 or quad x1 1

unit x42 unit x4 or quad x1 1

unit x42 unit x4 or quad x1 2

unit x4

Gigabit Ports 3 Ports 4 Ports 4 Ports

SERDES Lanes7 Lanes

PCI-e/SGMII/SATA/ QSGMII/ETM

12 Lanes PCI-e/SGMII/SATA/

QSGMII/ETM

16 Lanes PCI-e/SGMII/SATA/

QSGMII/ETM

Local Bus 16-bit 32-bit 32-bit

LTC6946 - Ultralow Noise and Spurious 0.37GHz to 5.7GHz Integer-N Synthesizer with Integrated VCO

The LTC®6946 is a high performance, low noise, 5.7GHz phase-locked

loop (PLL) with a fully integrated VCO, including a reference divider, phase-

frequency detector (PFD) with phase-lock indicator, ultralow noise charge

pump, integer feedback divider, and VCO output divider. The charge pump

contains selectable high and low voltage clamps useful for VCO monitoring.

The integrated low noise VCO uses no external components. It is

internally calibrated to the correct output frequency with no external system

support.

The part features a buffered, programmable VCO output divider with a

range of 1 through 6, providing a wide frequency range.

FEATURES:

Low Noise Integer-N PLL with Integrated VCO

–226dBc/Hz Normalized In-Band Phase Noise Floor

–274dBc/Hz Normalized In-Band 1/f Noise

–157dBc/Hz Wideband Output Phase Noise Floor

Excellent Spurious Performance

Output Divider (1 to 6, 50% Duty Cycle)

Output Buffer Muting

Low Noise Reference Buffer

Charge Pump Current Adjustable from 250µA to 11.2mA

Configurable Status Output

SPI Compatible Serial Port Control

PLLWizard™ Software Design Tool Support

APPLICATIONS:

Wireless Base Stations (LTE, WiMAX, W-CDMA, PCS)

Broadband Wireless Access

Military and Secure Radio

Test and Measurement

PO

WE

R M

AN

AG

EM

EN

T

16

Scan barcode for moreLTC6946 information


LTC6946-3 PLL Phase Noise

OFFSET FREQUENCY (Hz)

–140PHAS

E NO

ISE

(dBc

/Hz)

–130

–110

–90

–80

100 10k 100k 10M 40M

–150

1k 1M

–100

–120

–160

RMS NOISE = 0.61°RMS JITTER = 296fsfRF = 5.7GHzfPFD = 10MHzBW = 85kHz

GND

VCP+

CP

VREF+

REF–

REF+

BB

VRF+

RF+

RF–

GND

MUTE

V REF

O+

REFO

STAT

CS SCLK

SDI

SDO

V D+

V VCO

+

GND

CMA

CMB

CMC

GND TB

TUNE

LTC6946-3

0.01µF

0.01µF 2.2µF

0.01µF

100pF

0.01µF

68nH 68nH1µF

3.3V

3.3V

4.7nF

57nF

100pF

UNUSED OUTPUT IS AVAILABLE

FOR OTHER USE

RF INPUTSIGNAL

TO IFPROCESSING

LO IFRF

0.01µF

470pF

0.1µF 0.1µF3.3V3.3V

3.3V

+470pF

51.1Ω

50Ω

SPI BUS

10MHz

15Ω 97.6Ω5V

5.7GHz Wideband Receiver

17

PO

WE

R M

AN

AG

EM

EN

T


LTC2369 - 18-Bit, 1.6Msps, Pseudo-Differential Serial SAR ADCAchieves 96.5dB SNR Performance & Low 18mW Power .

The LTC®2369-18 is a low noise, low power, high speed

18-bit successive approximation register (SAR) ADC. Operating

from a 2.5V supply, the LTC2369-18 has a 0V to VREF pseudo-

differential unipolar input range with VREF ranging from 2.5V to

5.1V. The LTC2369-18 consumes only 18mW and achieves

±2.5LSB INL maximum, no missing codes at 18 bits with 96.5dB

SNR.

The LTC2369-18 has a high speed SPI-compatible serial

interface that supports 1.8V, 2.5V, 3.3V and 5V logic while also

featuring a daisy-chain mode. The fast 1.6Msps throughput with

no cycle latency makes the LTC2369-18 ideally suited for a wide

variety of high speed applications. An internal oscillator sets the conversion time, easing external timing considerations. The LTC2369-18 automatically powers

down between conversions, leading to reduced power dissipation that scales with the sampling rate.

FEATURES:

1.6Msps Throughput Rate

±2.5LSB INL (Max)

Guaranteed 18-Bit No Missing Codes

Low Power: 18mW at 1.6Msps, 18µW at 1.6ksps

96.5dB SNR (Typ) at fIN = 2kHz

–120dB THD (Typ) at fIN = 2kHz

Guaranteed Operation to 125°C

2.5V Supply

Pseudo-Differential Unipolar Input Range: 0V to VREF

VREF Input Range from 2.5V to 5.1V

No Pipeline Delay, No Cycle Latency

1.8V to 5V I/O Voltages

SPI-Compatible Serial I/O with Daisy-Chain Mode

Internal Conversion Clock

16-Lead MSOP and 4mm × 3mm DFN Packages

APPLICATIONS:

Medical Imaging

High Speed Data Acquisition

Portable or Compact Instrumentation

Industrial Process Control

Low Power Battery-Operated Instrumentation

ATE

Scan barcode for more LTC2369 information

32k Point FFT fS = 1.6Msps, fIN = 2kHz

5.1Ω

VREF

0V

10nF–

+

SAMPLE CLOCK

Fµ1.0Fµ01

2.5V

REF

1.8V TO 5V

2.5V TO 5.1V47µF(X5R, 0805 SIZE)

REF GND

CHAINRDL/SDI

SDOSCK

BUSYCNV

LTC2369-18

LT®6202

VDD OVDD

IN+

IN–

FREQUENCY (kHz)0 100 200 300 400 800700600500

–180

AMPL

ITUD

E (d

BFS) –60

–40

–20

–80

–100

–120

–140

–160

0SNR = 96.5dBTHD = –127dBSINAD = 96.5dBSFDR = 134dB

32k Point FFT fS = 1.6Msps, fIN = 2kHz

5.1Ω

VREF

0V

10nF–

+

SAMPLE CLOCK

Fµ1.0Fµ01

2.5V

REF

1.8V TO 5V

2.5V TO 5.1V47µF(X5R, 0805 SIZE)

REF GND

CHAINRDL/SDI

SDOSCK

BUSYCNV

LTC2369-18

LT®6202

VDD OVDD

IN+

IN–

FREQUENCY (kHz)0 100 200 300 400 800700600500

–180

AMPL

ITUD

E (d

BFS) –60

–40

–20

–80

–100

–120

–140

–160

0SNR = 96.5dBTHD = –127dBSINAD = 96.5dBSFDR = 134dB

Wide Range of Packages Meet Every Engineer's NeedExtensive product line-up of Power MOSFETs is optimized for a wide array of applications, from low-power notebook PCs to high-power networking equipment, enabling greater energy savings.

Renesas offers a diverse mix of products in various

high reliability packages. Line-up includes FETs with

built-in Schottky Barrier Diodes, as well as DrMOS

devices which integrate FETs with a driver IC in a single

package.

With one of the lowest Rds(on) on the market, the

best performance for Low Side MOSFETs is assured,

while a low Qg guarantees ultra-low losses for High Side

MOSFETs. Dual die packages reduce the PCB size and

optimize heat dissipation even further. DrMOS devices

provide the ultimate power density for unsurpassed

efficiency and a small footprint.

Scan barcode for more Power MOSFET information

Product Number

Package

VD

SS

(V)

VG

SS (

V)

I D (

A)

Pch

(W

) RDS(on)@VGS=4.5V

RDS(on)@ VGS=10V

QG

D (

nC

)

QG

(n

C)

Typ

Max

Typ

Max

RJK0225DNS-00#J5 3x3 25 +16/-12 30 30 7.4 9.6 5.9 7.2 0.9 8.5RJK0226DNS-00#J5 3x3 w/SBD 25 +12/-12 30 30 2.7 3.4 2.3 2.8 2.6 8

RJK03E0DNS-00#J5 3x3 30 +/-20 30 20 5.6 7.8 4.3 5.6 4.1 15.5

RJK03E2DNS-00#J5 3x3 30 +/-20 16 12.5 9.1 12.7 6.9 9 3.2 7.4NP75P03YDG-E1-AY 8PHSON 30 +/-20 75 138 6.2 9.6 4.8 6.2 29 84NP50P03YDG-E1-AY 8PHSON 30 +/-20 50 102 8.5 13 6.7 8.4 21 64RJK03C1DPB-00#J5 LFPAK w/SBD 30 +/-20 60 65 2.2 3.1 1.7 2.2 16 42RJK03C2DPB-00#J5 LFPAK w/SBD 30 +/-20 55 65 2.5 3.5 1.9 2.5 9 33RJK0305DPB-02#J0 LFPAK 30 +16/-12 30 45 10 13 6.7 8 1.5 8RJK0348DSP-00#J0 SO-8 30 +/-20 22 2.5 3.2 4.5 2.6 3.4 7 34RJK0349DSP-00#J0 SO-8 30 +/-20 20 2.5 3.6 5 2.9 3.8 5.3 25RJK0369DSP-00#J0 SO-8 30 +/-20 9 1.8 17.5 24.5 14 18.2 1.2 5.6RJK0371DSP-00#J0 SO-8 30 +/-20 8 1.8 22 30.8 16.5 21.5 1 3.8RJK0208DPA-00#J5A WPAK 25 +/-20 65 60 1.6 2 2.1 2.7 10 36

RJK0230DPA-00#J5AWPAK Dual

w/SBD25 +/-20

20(HS)/ 50(LS)

15(HS)/ 35(LS)

8.4(HS)/ 1.7(LS)

10.9(HS)/ 2.2(LS)

5.8(HS)/ 1.5(LS)

7.0(HS)/ 1.9(LS)

2.0(HS)/ 12.0(LS)

7.7(HS)/ 45.0(LS)

RJK0346DPA-01#J0B WPAK 30 +/-20 65 65 1.9 2.7 1.5 2 10.5 49.2RJK03C0DPA-00#J5A WPAK 30 +/-20 70 65 1.8 2.5 1.5 2 13.7 66RJK0390DPA-00#J5A WPAK 30 +/-20 60 60 2.1 2.9 1.7 2.21 11.3 54RJK0366DPA-02#J0B WPAK 30 +/-20 25 30 10.9 15.7 7.4 10 1.5 6.8RJK0355DPA-01#J0B WPAK 30 +/-20 30 25 11.8 16.5 8.2 10.7 1.2 6RJK0368DPA-00#J0 WPAK 30 +/-20 20 25 16.6 23.2 12.2 15.9 1.3 6.2

2SK4080-ZK-E1-AYTO-252/

(MP-3ZK)30 +/-20 48 29 10.2 10.2 7 7 6.3 13

2SK4090-ZK-E1-AYTO-252/

(MP-3ZK)30 +/-20 64 36 7.4 11 5.1 6 6 36

2SK4091-ZK-E1-AYTO-252/

(MP-3ZK)30 +/-20 30 21 9.8 21 13.6 13 2.2 15

NP88N03KDG-E1-AYTO-263

(MP-25ZK)30 +/-20 88 200 2.4 3.9 1.9 2.4 50 165

NP60N03KUG-E1-AYTO-263

(MP-25ZK)30 +/-20 60 88 - - 3.6 4.8 21 62

DrMOS Input Voltage Package Max Current

R2J2065x family 16 - 20 - 27 6x6QFN40 up to 40A

R2J2060x family 16 - 20 - 27 8x8DFN56 up to 50A

FEATURES:

With advanced specifications to support

voltage regulators for CPU cores, GPUs,

chipsets, and telecom networking

applications, Renesas low-voltage

power MOSFETs have improved power

efficiency and performance.

Low Rds(on) for low on-state power loss

Low Qg for low driver power loss

Low Qgd for low switching power loss

Product Number

Package

VD

SS

(V)

VG

SS (

V)

I D (

A)

Pch

(W

) RDS(on)@VGS=4.5V

RDS(on)@ VGS=10V

QG

D (

nC

)

QG

(n

C)

Typ

Max

Typ

Max

RJK0225DNS-00#J5 3x3 25 +16/-12 30 30 7.4 9.6 5.9 7.2 0.9 8.5RJK0226DNS-00#J5 3x3 w/SBD 25 +12/-12 30 30 2.7 3.4 2.3 2.8 2.6 8

RJK03E0DNS-00#J5 3x3 30 +/-20 30 20 5.6 7.8 4.3 5.6 4.1 15.5

RJK03E2DNS-00#J5 3x3 30 +/-20 16 12.5 9.1 12.7 6.9 9 3.2 7.4NP75P03YDG-E1-AY 8PHSON 30 +/-20 75 138 6.2 9.6 4.8 6.2 29 84NP50P03YDG-E1-AY 8PHSON 30 +/-20 50 102 8.5 13 6.7 8.4 21 64RJK03C1DPB-00#J5 LFPAK w/SBD 30 +/-20 60 65 2.2 3.1 1.7 2.2 16 42RJK03C2DPB-00#J5 LFPAK w/SBD 30 +/-20 55 65 2.5 3.5 1.9 2.5 9 33RJK0305DPB-02#J0 LFPAK 30 +16/-12 30 45 10 13 6.7 8 1.5 8RJK0348DSP-00#J0 SO-8 30 +/-20 22 2.5 3.2 4.5 2.6 3.4 7 34RJK0349DSP-00#J0 SO-8 30 +/-20 20 2.5 3.6 5 2.9 3.8 5.3 25RJK0369DSP-00#J0 SO-8 30 +/-20 9 1.8 17.5 24.5 14 18.2 1.2 5.6RJK0371DSP-00#J0 SO-8 30 +/-20 8 1.8 22 30.8 16.5 21.5 1 3.8RJK0208DPA-00#J5A WPAK 25 +/-20 65 60 1.6 2 2.1 2.7 10 36

RJK0230DPA-00#J5AWPAK Dual

w/SBD25 +/-20

20(HS)/ 50(LS)

15(HS)/ 35(LS)

8.4(HS)/ 1.7(LS)

10.9(HS)/ 2.2(LS)

5.8(HS)/ 1.5(LS)

7.0(HS)/ 1.9(LS)

2.0(HS)/ 12.0(LS)

7.7(HS)/ 45.0(LS)

RJK0346DPA-01#J0B WPAK 30 +/-20 65 65 1.9 2.7 1.5 2 10.5 49.2RJK03C0DPA-00#J5A WPAK 30 +/-20 70 65 1.8 2.5 1.5 2 13.7 66RJK0390DPA-00#J5A WPAK 30 +/-20 60 60 2.1 2.9 1.7 2.21 11.3 54RJK0366DPA-02#J0B WPAK 30 +/-20 25 30 10.9 15.7 7.4 10 1.5 6.8RJK0355DPA-01#J0B WPAK 30 +/-20 30 25 11.8 16.5 8.2 10.7 1.2 6RJK0368DPA-00#J0 WPAK 30 +/-20 20 25 16.6 23.2 12.2 15.9 1.3 6.2

2SK4080-ZK-E1-AYTO-252/

(MP-3ZK)30 +/-20 48 29 10.2 10.2 7 7 6.3 13

2SK4090-ZK-E1-AYTO-252/

(MP-3ZK)30 +/-20 64 36 7.4 11 5.1 6 6 36

2SK4091-ZK-E1-AYTO-252/

(MP-3ZK)30 +/-20 30 21 9.8 21 13.6 13 2.2 15

NP88N03KDG-E1-AYTO-263

(MP-25ZK)30 +/-20 88 200 2.4 3.9 1.9 2.4 50 165

NP60N03KUG-E1-AYTO-263

(MP-25ZK)30 +/-20 60 88 - - 3.6 4.8 21 62

DrMOS Input Voltage Package Max Current

R2J2065x family 16 - 20 - 27 6x6QFN40 up to 40A

R2J2060x family 16 - 20 - 27 8x8DFN56 up to 50A

PO

WE

R M

AN

AG

EM

EN

T

18 For more information, including pricing, availability, datasheets and samples (if available), please visit www.nuhorizons.com/portal

19

PO

WE

R M

AN

AG

EM

EN

T


Scan barcode for more InQor DC-DC Converter information

Next-Generation, Rugged Isolated DC-DC Converters The InQor® Series dc-dc converter are composed of next-generation, board-mountable, isolated, fixed switching frequency dc-dc converters that use synchronous rectification to achieve extremely high power conversion efficiency. Each module is supplied completely encased to provide protection from the harsh environments seen in many industrial and transportation applications.

Part Numbering Example: IQ1B480QTC03NRS

Product Family

Cont. Input Voltage

Output Voltage

Package SizePerformance

SeriesThermal Design Max. Iout

Options Description

Enable Logic

Pin Length

Features

IQ

12: 9-22V 18: 9-36V 24: 18-36V 32: 9-75V 36: 18-75V 48: 34-75V 64: 18-135V 68: 12-150V 70: 34-135V 72: 42-110V 90: 34-160V 1B: 66-160V 4H: 180-425V

012: 1.2V 015: 1.5V 018: 1.8V 025: 2.5V 033: 3.3V 050: 5V 070: 7V 120: 12V 150: 15V 240: 24V 280: 28V 300: 30V 400: 40V 480: 48V 500: 50V

S: Sixteenth Brick Q: Quarter Brick H: Half Brick F: Full Brick

K: Kilo M: Mega G: Giga T: Tera P: Peta E: Exa Z: Zeta

C: Encased D: Encased Non-threaded Baseplate V: Flanged Baseplate

60: 60A 50: 50A 30: 30A 10: 10A 06: 6A 02: 2A (not all shown)

N: Negative R: 0.180"S: Standard F: Full Feature

OPERATIONAL FEATURES: High efficiency up to 95% Input voltage ranges from 9V-160V and 180V-425V Output power up to 600W Fixed frequency switching, low output noise No minimum load requirement Full Feature Optional on some models

MECHANICAL: Industry standard pin-out configurations Flanged baseplate available Industry standard footprints: Full Brick: 2.48” x 4.69” Half Brick: 2.39” x 2.)49” Quarter Brick: 1.54” x 2.39” Sixteenth Brick: 1.04” x 1.44”

PROTECTION/CONTROL: Input under-voltage lockout Output current limit and short circuit protection Active back bias limit prevents damage to converter from external load induced pre-bias Output over-voltage protection Thermal shutdown

BENEFITS:

High power density means smaller size, more board area for other functions Low weight reduces strain during vibration Wide range of output voltages from 1.2-50Vout Synqor’s proven designs lead to high reliability and quality Single board production - short lead times & flexibility Manufacturing excellence - high level of automation improves lead times, flexibility and reliability

GENERAL SPECIFICATIONS:

Operating Temperature -40ºC to +100ºC Output Voltage Set Point ±1.0% Output Voltage Ripple <1% of Vout (typ.) Switching Frequency 240 - 350kHz (IQ4H QT & HT) 450 - 550kHz Transient Response <7% of Vout (typ.) Output Voltage Trim Range +10% to -20% (Sixteenth Brick) +10% to -10% (Half Brick Zeta) +10% to -50% Isolation Voltage Up to 4250Vdc

IQ64 - IQ4H Reinforced Insulation Up to 4250V, 100MΩ input-to-output isolation EN 60950-1:2006/A11:2009/A1:2010 UL 60950-1:2007 CAN/CSA C22.2 NO. 60950-1:2007 CE marked

SAFETY:

IQ12 - IQ48 Basic Insulation 2250V, 30MΩ input-to-output isolation EN 60950-1:2006/A11:2009/A1:2010 UL 60950-1:2007 CAN/CSA C22.2 NO. 60950-1:2007

PO

WE

R S

UP

PL

IES

20

Scan barcode for more XL375 CC product information


XL375 CC - 260 Watts without FansUltra Small, High Efficiency Power Supply with Convection Cooling Option Delivers 260 Watts Without Fans.

The new Convection Cooling Option for the XL375 family delivers 260 watts across all output voltages and eliminates the fans and fan controllers needed to cool conventional power supplies, saving cost and freeing up valuable component space. Doing away with fans and related components and circuitry is significant to designers tasked with increasing the reliability and decreasing the noise of products (fans may fail, and they generate most of the audible sound in contemporary designs).

OEMs can design in both convection-cooled and fan-cooled power supplies that use the same very compact, low profile 3.3” x 5” x 1.5” packaging, connectors and layout, saving time and cost. The very low profile packaging is ideally suited to 1U product designs and makes the system designer’s job much easier.

The Convection Cooling Option gives OEMs a distinct packaging and cost benefit while also reducing overall power consumption and cooling requirements for applications such as industrial automation, telecommunications, gaming systems, security and surveillance systems, and network servers. Our unique technology gives OEM engineers new flexibility in power system design that pays real competitive dividends in their final products.

All models also include Active Current Sharing to allow up to four supplies to be operated in parallel for high output applications. The Active OR-ing mosfet board option is available for N+1 applications. Both 5V standby and 12V auxiliary outputs can be wired Or-able when the main output is disabled. Synchronous rectification delivers exceptionally high efficiency: up to 93% in some models.

FEATURES:

Up to 93% efficiency

High power density

All outputs may be paralleled

Remote On / Off

5V Standby (1A)

12V Aux output

Universal AC input

Active current sharing for N, N+1 (main output)

OR-ing mosfet board option

Active inrush current protection

Active PFC (90 - 264 VAC)

BENEFITS:

No fans means higher reliability

Eliminating fans reduces noise

Small size ideally suited for 1U chassis designs

APPLICATIONS:

Servers

Controllers

Switches

Test equipment

Industrial automation

Gaming systems

Security and surveillance systems

TYPICAL MECHANICAL DRAWING:Inches (millimeters)

Screws shown for reference only

1.50 (38.1)

.75(19.1)

XL375 AC - DCHeight = 1.50 (38.1)

J15 (–)

J204

J1

J14 (+)

5.00(127.0)

4.55(115.6)

2.55(64.8)

3.33(84.6)

.225(5.7)

.39(9.9)

PR

OG

RA

MM

AB

LE

LO

GIC

The Lowest-Power Serdes-Capable FPGA in the Industry

For more information, including pricing, availability, datasheets and samples (if available), please visit www.nuhorizons.com/portal 21

Lattice has released three new product derivatives of its award

winning LatticeECP3 FPGA family. The LatticeECP3 FPGA family offers

multi-protocol 3.2G SERDES with XAUI jitter compliance, DDR3 memory

interfaces, powerful DSP capabilities, high density on-chip memory and

up to 149K LUTS, all with half the power consumption and half the price of

competitive SERDES-capable FPGAs.

LatticeECP3 LOW POWER DEVICES:

40% Lower Static Power Consumption

17k – 149k LUTS

Speed Grades: -6, -7, -8

Commercial and Industrial Temperature Grades

LatticeECP3 HIGH SPEED DEVICES:

10% Faster than Current ECP3 -8 Speed Grade Devices

35k – 149k LUTS


LatticeECP3 MINI PACKAGE:

10x10mm 328-ball csBGA (0.5mm pitch)

17k LUTS

116 User I/O

16-bit DDR3 Interface

2 Channels of 3.2 Gbps SERDES

Speed Grades: -6, -7, -8

Standard and Low Power Grades


APPLICATIONS:

Low-power LatticeECP3 FPGAs are used in a wide-range of applications, such as wireless and wireline communication, video processing, security and surveillance, industrial networking, industrial automation, computing, storage, medical equipment, and consumer.

Video Data Transfer Professional Video Cameras, Camcorders, Displays

Surveillance Camera and Security Systems

Video Communication

LED Controllers

Medical Imaging, Medical Camera Controllers

Automotive Rear-seat Entertainment Systems

Transition of 7:1 LVDS Interfaces to 1 – 3 Gbps Serial Data Interfaces

Communication Data Transfer Wireline – Small-form-factor Pluggable Transceivers, Compact Modems

Wireless – Pico Base-stations, Direct Antenna Systems

Emerging Green Applications Micro Inverters for Individual Solar Panels

Device ECP3-17 ECP3-35 ECP3-70 ECP3-95 ECP3-150

LUTs (K) 17 33 67 92 149

Speed Grades -6, -7, -8 -6, -7, -8, -9 -6, -7, -8, -9 -6, -7, -8, -9 -6, -7, -8, -9

Lower Power

EBR SRAM Blocks 30 72 240 240 372

EBR SRAM (Kbits) 552 1,327 4,420 4,420 6,850

Distributed RAM (Kbits) 36 68 145 188 303

18x18 Multipliers 24 64 128 128 320

3.2Gbps SERDES Channels 4 4 12 12 16

Maximum User I/O Pins 222 310 490 490 586

PLLs + DLLs 2+2 4+2 10+2 10+2 10+2

256-pin fpBGA (17x17mm) 4/133 4/133

328-ball csBGA (10x10mm) 2/116

484-ball fpBGA (23x23mm) 4/222 4/295 4/295 4/295

672-ball fpBGA (27x27mm) 4/310 8/380 8/380 8/380

1156-ball fpBGA (35x35mm) 12/490 12/490 16/586

Scan barcode for more LatticeECP3 information

APPLICATIONS:

Servers

Controllers

Switches

Test equipment

Industrial automation

Gaming systems

Security and surveillance systems

TIM

ING

22 For more information, including pricing, availability, datasheets and samples (if available), please visit www.nuhorizons.com/portal

RotaryWave is a trademark of Multigig, Inc.ClockWorks is a trademark of Micrel, Inc.

Scan barcode for more ClockWorks™ Flex family information

Micrel's ClockWorks™ Flex FamilyHighly Configurable Programmable Clock Synthesizer Family That Breaks the 100 Femto-Second Jitter Barrier

Micrel’s ClockWorks™ Flex Family of ultra-high performance clock synthesizers is based on RotaryWave™ technology. It enables world class reference timing generation for networking, storage and video applications, being the first mainstream clock synthesizer architecture to break the 100 femtosecond jitter barrier. The ClockWorks Flex Family offers flexible clock generation and distribution solutions that cover the most commonly used output formats, LVCMOS, LVPECL, LVDS and HCSL, with frequency coverage up to 250MHz for single-ended LVCMOS clocks and up to 840MHz for differential LVPECL, LVDS and HCSL clock types.

In addition to its class leading jitter performance, the ClockWorks Flex line of clock generation and clock distribution products features superior power supply rejection, a critical performance attribute often overlooked in standard clock product design. ClockWorks devices do not need the normal kit of power supply filtering components required by most clock devices, so saves up to 30% on the total timing solution in hidden power supply conditioning costs and significantly streamlines the overall timing Bill of Materials.

BENEFITS:

Cost-effective compared to crystal oscillator plus buffer solution One ClockWorks device can replace 2 XOs + 2x 1:4 buffer (with differential output) or 2 XOs + 2x 1:8 buffer (with single-ended output)

Short lead time than crystal oscillator (3 weeks vs. 12 weeks) Flexibility: Supports customer-specific frequency configurations Different types and numbers of outputs

Optional SPI access to internal registers: Overwrite frequency configuration on-the-fly after power-up Multi-rate clocking and system level debug support

Better PSRR to simplify power supply design and increase system robustness

APPLICATIONS:

Telecommunication (SDH/SONET) line cards

Base stations (BTS) and wireless infrastructure

1GbE and 10GbE switches/routers

Data center storage (SAS/SATA and Fibre Channel)

PCI Express Gen 2.0/3.0 and sRIO 1.3/2.0

Processor and FPGA clocking

Reference clock for phase-noise sensitive applications

MICREL’S CLOCKWORKS FAMILY OF PRODUCTS:

Part Number Description Input Package(s)

SM802101UMG ClockWorks PCI-e Octal 100MHz/200MHz Ultra-Low Jitter, HCSL Frequency Synthesizer XTAL/REF_IN 44-Pin QFN

SM802104UMG ClockWorks Fibre Channel (106.25MHz, 212.5MHz), Ultra-Low Jitter, LVPECL Frequency Synthesizer XTAL/REF_IN 24-Pin QFN

SM802105UMG ClockWorks 10GbE (156.25MHz, 312.5MHz), Ultra-Low Jitter, LVPECL Frequency Synthesizer XTAL/REF_IN 24-Pin QFN

SM802108UMG ClockWorks10GbE & GbE (156.25MHz, 125MHz) Ultra-Low Jitter, LVPECL Frequency Synthesizer XTAL/REF_IN 24-Pin QFN

SM802109UMG ClockWorks PCI-e Quad 100MHz Ultra-Low Jitter, HCSL Frequency Synthesizer XTAL/REF_IN 24-Pin QFN

SM802110UMG ClockWorks CPRI 153.6MHz Ultra-Low Jitter, LVPECL Frequency Synthesizer REF_IN 24-Pin QFN

SM802111UMG ClockWorks GbE Dual 125MHz Ultra-Low Jitter, LVPECL Frequency Synthesizer REF_IN 24-Pin QFN

SM802112UMG ClockWorks 3-Output, 480MHz/80MHz, Ultra-Low Jitter LVDS/CMOS Frequency Synthesizer REF_IN 44-Pin QFN

SM802116UMG ClockWorks Fibre Channel (106.25MHz, 212.5MHz) Ultra-Low Jitter, LVDS Frequency Synthesizer XTAL/REF_IN 24-Pin QFN

SM802117UMG ClockWorks GbE (125MHz) Ultra-Low Jitter, LVPECL Frequency Synthesizer XTAL/REF_IN 24-Pin QFN

SM802120UMG ClockWorks Fibre Channel (106.25MHz, 212.5MHz) Ultra-Low Jitter, LVDS Frequency Synthesizer XTAL 44-Pin QFN

SM802124UMG ClockWorks DUAL 125MHz Ultra-Low Jitter, CMOS Frequency Synthesizer REF_IN 24-Pin QFN

Samsung + LED Lighting + Nu Horizons =

Innovative Lighting Solutions

LED Lighting Solutionsfrom

Supporting LED solutions suppliers available from Nu Horizons

Samsung is committed to leading the LED lighting revolution, and Nu Horizons is committed to delivering the right solution to meet your LED project needs.

Mid-power white LEDs

High-power white LEDs

High-voltage white AC LEDs

High-voltage white DC LEDs

Light Engines and Modules

LED Tube

Let Nu Horizons be your design and manufacturing solution partner for your lighting needs. Learn more at www.nuhorizons.com/ledlighting or scan the

QR code below with your smart phone.

Design Custom LED Assembly

RotaryWave is a trademark of Multigig, Inc.ClockWorks is a trademark of Micrel, Inc.

24

Tim

ing:

Clo

ck G

ener

ator

s

Inpu

t Fre

q (M

Hz)

Outp

ut F

req

“# o

f Clo

cks

S =

Sin

gle

Ende

d D

= D

iffer

entia

l”Fe

atur

esM

inM

axM

inM

ax

AKM

S

ingl

e-Cl

ock

2741

.538

12.2

8874

.25

1 S

2 Se

lect

able

Out

put F

requ

enci

es; P

LL

M

ulti-

Cloc

k24

74.1

7582

4.09

614

8.5

4 S

VCXO

; 3 P

LLs

S

prea

d Sp

ectru

m6.

112

86.

115

01

S1-

4 x

PLL;

Sel

ecta

ble

mod

ulat

ion

Exar

W

AN8k

Hz32

.768

kHz

150H

z2.

048k

Hz2

S2

PLLs

S

ONET

15M

Hz40

MHz

156M

Hz32

0MHz

1 D

8, 1

6, 3

2 M

ultip

lier

Latti

ce

Clo

ck G

ener

ator

840

04

400

10-2

0 S/

5-1

0 D

Zero

Del

ay B

uffe

r; PL

L; V

CO; 5

Clk

Dom

ains

Line

ar T

echn

olog

y

Tim

erBl

ox-

PWM

Volta

ge C

ontro

lled

3.8H

z1M

Hz1

S4

duty

cyc

le o

ptio

ns

T

imer

Blox

- De

lay

Resi

stor

Con

figur

ed1k

Hz0.

03Hz

1 S

Dela

y ei

ther

risi

ng o

r fal

ling

edge

P

LL S

ynth

esiz

ers

Inte

grat

ed V

CO37

3MHz

5.79

GHz

1 D

Inte

ger-

N PL

L; O

utpu

t Div

ider

Mic

rel

C

lock

Wor

ks11

MHz

80M

Hz10

MHz

840M

Hz1

S/ 4

DLV

PECL

, LVD

S, P

ECL,

HST

L

A

nyCl

ock

10M

Hz25

MHz

10M

Hz95

0MHz

1 D

Frac

tiona

l-N S

ynth

esiz

er; M

icro

Wire

Inte

rface

SaRo

nix-

eCer

a

Clo

ck G

ener

ator

s- P

CXT

AL10

0MHz

400M

Hz10

S 8

DPC

Clo

ck s

ynth

esiz

er

C

lock

Gen

erat

ors-

PCI

eXT

AL32

.256

MHz

133M

Hz4

S 5

DPC

Ie s

uppo

rt, S

MBU

S pr

ogra

mm

able

C

lock

Gen

erat

or- V

ideo

XTAL

192M

Hz24

0MHz

1 D

M-L

VDS

Outp

ut fo

r Vid

eo; 8

xPLL

STM

icro

elec

tron

ics

5

55/6

Tim

erRC

Con

trolle

d0

500K

Hz2

SSt

anda

rd 5

55 T

imer

; Bip

olar

25

Tim

ing:

Cry

stal

s an

d Os

cilla

tors

Freq

uenc

y Ra

nge

Pack

ages

Feat

ures

Exar

V

CO0.

01Hz

-1M

Hz, 0

.01H

z-30

0KHz

PDIP,

SOI

CTr

iang

le a

nd S

quar

e W

ave

Outp

uts

P

letro

nics

C

ryst

al32

.768

KHz

- 30

0MHz

SMD,

Lea

ded

SMD

Pack

ages

not

rota

tion

sens

itive

V

CXO

1.7M

Hz -

1.1

7GHz

SMD

CMOS

, LVD

S, P

ECL

T

CXO

8MHz

- 5

2MHz

SMD,

DIP

Clip

ped

Sine

, CM

OS

T

CXO

19.2

MHz

, 26M

HzSM

DFe

mto

Cel

l

O

scill

ator

s- C

MOS

32.7

68KH

z -

190M

HzSM

D, D

IPCM

OS O

utpu

t

O

scill

ator

s- L

VDS/

PECL

/HCS

L1M

Hz-

1.17

GHz

SMD

LVDS

/PEC

L/HC

SLOu

tput

SaRo

nix-

eCer

a

Qua

rtz C

ryst

als

1.84

32M

Hz-

150M

HzSD

M, L

eade

dHe

rmet

ical

ly s

eale

d w

ith in

ert g

as

V

CXO

1MHz

- 8

00M

HzSM

Dlo

w-ji

tter;

+-2

0ppm

acc

urac

y

S

SXO

16M

Hz-

67M

HzSM

DSp

read

and

Mod

ulat

ion

optio

ns

X

O0M

Hz-

250M

HzSM

DCM

OS, C

lippe

d Si

ne, H

CSL,

LVD

S, P

ECL

A

SSP

XO16

.384

MHz

- 15

9.37

5MHz

SMD

Netw

orki

ng, T

elec

om a

nd S

tora

ge F

requ

enci

es

Line

ar T

echn

olog

y

Sili

con

Osci

llato

rs1k

H- 6

8MHz

SOT,

MSO

P, DF

N1-

8 Ou

tput

s; I2

C/SP

I Pro

gram

mab

le

T

imer

Blox

- VCX

O48

8kHz

- 2M

HzSO

T, D

FNRe

sist

or P

rogr

amm

able

T

imer

Blox

- Lo

w F

req

XO1m

s- 9

.5Hr

sSO

T, D

FNRe

sist

or P

rogr

amm

able

Mur

ata

Pow

er S

olut

ions

C

ryst

al R

eson

ator

24M

Hz-4

8Mhz

SMT

+-3

0ppm

Fre

q To

l; +

-40p

pm T

emp

Stab

VC

XO: V

olta

ge C

ontro

ller O

scill

ator

TC

XO: T

empe

ratu

re C

ontro

lled

Osci

llato

r

26

Tim

ing:

Rea

l Tim

e Cl

ocks

Inpu

t Fre

qIn

terf

ace

Feat

ures

Epso

n

RA

Fam

ilyIn

tern

al 3

2.76

8 kH

z Cr

ysta

l4-

wire

/I2C

Cloc

k st

atus

func

tion;

Clo

ck O

utpu

t

R

TC F

amily

Inte

rnal

32.

768

kHz

Crys

tal

3-w

ire/I2

C/4-

bit P

aral

lel

Low

vol

tage

det

ectio

n; O

utpu

t sel

ectio

n

R

X Fa

mily

Inte

rnal

32.

768

kHz

Crys

tal

3-w

ire/I2

C/4-

bit P

aral

lel

Outp

ut s

elec

t; Pr

ogra

mm

able

out

put p

orts

; EEP

ROM

dat

a an

d ID

; RAM

Peric

om

PT7

C43x

xEx

tern

al 3

2.76

8 kH

z Cr

ysta

lI2

CNV

RAM

; Bat

tery

bac

kup;

Prog

ram

mab

le o

utpu

t; Du

al A

larm

s

P

T7C4

5xx

Exte

rnal

32.

768

kHz

Crys

tal

I2C

Sele

ctab

le o

utpu

t fre

quen

cy; O

sc s

top

flag;

P

T7C4

9xx

Exte

rnal

32.

768

kHz

Crys

tal

I2C

Batte

ry p

ower

; MCU

sup

ervi

sor;

NV R

AM; T

rickl

e ch

arge

r

ST S

eria

l RTC

Exte

rnal

32.

768

kHz

Crys

tal

SPI/I

2CW

atch

dog;

Pow

er fa

il; P

oR; B

at lo

w; B

atte

ry b

acku

p; N

VRAM

T

imek

eepe

rIn

tern

al 3

2.76

8 kH

z Cr

ysta

l8-

bit S

RAM

inte

rface

Incl

udes

cry

stal

and

bat

tery

; NVR

AM

T

imek

eepe

r Sup

ervi

sor

Inte

rnal

32.

768

kHz

Crys

tal

8-bi

t SRA

M in

terfa

ceIn

clud

es c

ryst

al a

nd b

atte

ry; E

xter

nal S

RAM

; Wat

chdo

g; P

ower

fail

Tim

ing:

Clo

ck D

istr

ibut

ion

- Fa

nout

/ De

lay

/ Ske

w C

ontr

olIn

put F

req

Outp

ut F

req

“# o

f Clo

cks

S =

Sin

gle

Ende

d D

= D

iffer

entia

l”Fe

atur

esM

inM

axM

inM

ax

Latti

ce

Diff

eren

tial Z

ero

Dela

y, Fa

nout

Buf

fer

40M

Hz40

0MHz

50M

Hz40

0MHz

6 D

, 10

DPL

L; P

hase

/Tim

e Sk

ew C

ontro

l; I2

C Pr

ogra

mm

able

S

ingl

e En

ded

Zero

Del

ay, F

anou

t Buf

fer

8MHz

267M

Hz8M

Hz26

7MHz

4 S-

20

SPL

L; S

kew

Con

trol;

JTAG

Pro

gram

mab

le

Mic

rel

C

lock

Dis

tribu

tion

0MHz

7GHz

0MHz

7GHz

1 S-

22

DCM

L, L

VPEC

L, L

VDS,

TTL

, PEC

L (In

put/O

utpu

t)

H

BW C

lock

Div

ider

s (1

/2/3

/4/5

/8/1

6)0M

Hz4G

Hz0M

Hz1G

Hz1

S- 1

5 D

LVPE

CL, L

VDS,

ECL

, PEC

L (In

put/O

utpu

t)

Peric

om

C

lock

Buf

fers

0MHz

500M

Hz0M

Hz50

0MHz

1 S-

18

DTT

L, C

MOS

, LVT

TL, L

VCM

OS, P

ECL,

Clip

ped

Sine

Z

ero

Dela

y Bu

ffers

0MHz

410M

Hz0M

Hz41

0MHz

1 S-

12

DHC

SL, T

TL, C

MOS

, SST

L

C

lock

Ske

w A

djus

tmen

t3.

75M

Hz11

0MHz

3.75

MHz

110M

Hz8

S -

4 D

TTL,

CM

OS, L

VTTL

, LVC

MOS

, LVP

ECL,

PEC

L, C

lippe

d Si

ne

ST C

lock

Dis

tribu

tion

10M

Hz52

MHz

10M

Hz52

MHz

2, 3

, 4 S

Cl

ock

enab

les,

VTC

XO fr

om in

tern

al B

andG

ap re

f

27

POL

Pow

er: D

iscr

ete

DC-D

C Re

gula

tors

and

Mod

ules

; AC

-DC

PFC

Cont

rolle

rsM

in V

inM

ax V

inM

in V

out

Max

Vou

tM

ax Io

utFe

atur

es

Alle

gro

Mic

rosy

stem

s

LDO

4.5V

- 9V

23V-

50V

0.8V

24V

7AM

ultip

le a

djus

tabl

e re

gula

tors

, Int

egra

ted

POR

and

WDT

, Out

of P

hase

sw

itchi

ng, F

ault

flag

S

witc

hing

2.5V

10V

36V

36V

15m

AOL

ED d

ispl

ay b

ias

supp

ly; W

LED

back

light

Exar

L

DO1.

8V -

4.1

V5.

5V -

30V

1.2V

5V5A

Soft

star

t; En

able

; The

rmal

, Ove

r cur

rent

and

Out

put s

hort

circ

uit p

rote

ctio

n;

S

witc

hing

0.7V

- 5V

3.3V

- 30

V0.

5V

28V

12A

Soft

star

t; En

able

; The

rmal

, Ove

r cur

rent

and

Out

put s

hort

circ

uit p

rote

ctio

n;

GE E

nerg

y

Dly

nx3V

14V

0.45

5.5V

20A

PMBu

s; F

lexi

ble

outp

ut v

olta

ge s

eque

nce;

Ove

r cur

rent

pro

tect

ion;

Rem

ote

On/O

ff; O

ver T

empe

ratu

re p

rote

ctio

n

P

roLy

nx9V

36V

3V18

V5A

Prog

ram

mab

le o

utpu

t vol

tage

; Ove

r cur

rent

/tem

pera

ture

lim

it; R

emot

e en

able

;

T

lynx

2.4V

16V

0.59

V8V

30A

Flex

ible

out

put v

olta

ge s

eque

nce;

Ove

r cur

rent

/ther

mal

pro

tect

ion;

Rem

ote

On/O

ff;

N

aos

Rapt

or4.

5V

14V

0.59

V6V

60A

Prog

ram

mab

le o

utpu

t vol

tage

; Ove

r cur

rent

/tem

pera

ture

lim

it; R

emot

e en

able

;

Line

ar T

echo

nolo

gy

LDO

-4.

3V -

6V

-35

V -

80V

-5V

5V10

AM

ultip

le o

utpu

ts; A

djus

tabl

e ou

tput

vol

tage

; Cur

rent

lim

it pr

otec

tion;

Rev

erse

-bat

tery

pro

tect

ion;

The

rmal

lim

it pr

otec

tion;

S

witc

hing

0.02

V -

18V

0.5V

- 1

00V

0.8V

24V

240A

Mul

tiple

out

puts

; Mul

ti-ph

ase

oper

atio

n; C

ontin

uous

, pul

se-s

kipp

ing

or b

urst

mod

e op

erat

ion;

Adj

usta

ble

soft

star

t vol

tage

C

harg

e Pu

mp

1.5V

- 5V

4V-1

8V -

5V

5.1V

1ALo

w n

oise

; LED

driv

er; S

prea

d sp

ectru

m; S

D di

scon

nect

; Mul

tiple

out

puts

M

odul

e (u

Mod

ule)

1.5V

- 5V

5.5V

- 7

2V0.

6V34

V16

ASo

ft st

art;

Low

EM

I; Po

lyph

ase;

Pow

er g

ood;

Out

put d

isco

nnec

t; M

argi

ning

; Ext

erna

l syn

chro

niza

tion

Mar

vel

P

FC C

ontro

ller-

Boo

st/F

lyba

ckSt

anda

rd A

C Vo

ltage

inpu

t2V

18V

2APo

wer

Fac

tor C

orre

ctio

n co

ntro

ller w

ith 0

.99

pow

er fa

ctor

; UVL

O, O

VP, T

herm

al s

hutd

own;

Ada

ptiv

e co

ntro

l loo

p fo

r w

ide

oper

atin

g ra

nge;

Low

har

mon

ic d

isto

rtion

S

witc

hing

3V5.

5V-

12V

0.72

V3.

63V

10A

Sing

le o

r mul

tiple

out

puts

; 95%

effi

cien

cy; S

ingl

e re

sist

or o

utpu

t pro

gram

min

g; In

tern

al fr

eque

ncy

com

pens

atio

n;

Min

imal

ext

erna

l com

pone

nts

Mic

rel

L

DO1.

65V-

3V

5.5V

- 3

0V0.

9V5.

1V7.

5ACu

rren

t and

The

rmal

lim

iting

; Err

or fl

ag o

n dr

opou

t; Lo

gic

cont

rolle

d sh

utdo

wn;

Pro

gram

mab

le o

utpu

t;

S

witc

hing

0.9V

- 9V

5.5V

- 1

80V

0.7V

60V

30A

Prog

ram

mab

le c

urre

nt li

mit;

Inte

grat

ed s

witc

h; P

rogr

amm

able

ove

rvol

tage

pro

tect

ion;

Ena

ble;

The

rmal

shu

tdow

n

Rene

sas

S

witc

hing

0.9V

- 8

.6V

4.5V

- 4

0V0.

9V40

V1A

Curr

ent l

imite

r; M

ultip

le o

utpu

ts; O

verc

urre

nt d

etec

tion;

Und

er v

olta

ge lo

ckou

t; En

able

ST S

witc

hing

9V-

28V

46V

5.1V

24V

4AEm

bedd

ed h

eat s

ink;

Ena

ble;

Out

put c

urre

nt o

verlo

ad p

rote

ctio

n; O

utpu

t ove

rvol

tage

pro

tect

ion;

28

Boar

d Le

vel D

C-DC

Con

vert

ers:

Pow

er S

uppl

ies

/ Mod

ules

Inpu

t Vol

tage

Outp

ut V

olta

geAm

ps/W

atts

Size

(mm

)Is

olat

ed

GE E

nerg

y

S

tingr

ay36

-75V

3.3V

15A

1/16

to 1

/2 B

rick

Yes

B

arac

uda

36-7

5V12

V25

-33A

1/4

Bric

kYe

s

O

rca

36-7

5V48

V14

A1/

2 to

Ful

l Bric

kYe

s

D

lynx

3-14

V0.

45-5

.5V

3-20

A20

.32

x 11

.43

x 8.

5No

P

roLy

nx9-

36V

3-18

V15

.-5A

20.3

x 1

1.4

x 8.

5 No

T

lynx

2.4-

14V

.59-

5.5V

12A

33.0

0 x

13.4

6 x

8.5

No

N

aos

Rapt

or4.

5V-1

4V.5

9-6V

60A

10.4

x 1

6.5

x 7.

84 t

o 65

.5 x

31.

8 x

11.6

No

Line

ar T

echn

olog

y

u

Mod

ule

1.5V

- 7

2V0.

6V -

34V

16A

6 x

6 x

2.32

to 1

5 x

15 x

4.3

2No

LHV

Pow

er

D

-Ser

ies

11V-

32V

500-

7KV

1.4m

A -

20m

A/10

W4.

062i

nx 1

inx

2.06

2in

No

E

-Ser

ies

11.5

to 3

2VDC

500-

3KV

1.6m

A -

10m

A/ 5

W2.

250i

n x

2in

x 1.

05in

No

P

PM-S

erie

s14

-27V

1KV-

1.4K

V0.

7mA-

2mA/

3W

3.03

in x

2.1

2in

x 0.

9in

No

A

-Ser

ies

5-14

V1K

V- 4

KV3W

1.5i

n x

2.5i

n x

0.75

inYe

s

G

MA-

Serie

s12

/24V

100V

- 3K

V1.

5W1.

49in

x 1

.41i

n x

0.07

8in

Yes

Mea

n W

ell

M

odul

e9-

75V

5,12

,15,

24V

50m

A- 1

5A/0

.5W

- 15

0W 1

in x

1in

to 1

/2 B

rick

Yes

O

n Bo

ard

9.2-

72V

5,12

,15,

24V

0.33

-4A/

5W-6

0W1.

6in

x 1i

n x

0.32

7in

to 2

in x

1.0

24in

x 0

.421

inYe

s

P

CB9.

2-72

V5,

12,2

4V0.

25-9

A/ 5

W-4

5W 7

5x 4

0 x2

0 to

127

x 76

x 30

Yes

E

nclo

sed

9.2-

143V

5,12

,24,

48V

0.62

5- 6

0A /1

5W-1

000W

78x

51x

28

to 2

95x

127x

41

Yes

Mur

ata

Pow

er S

olut

ions

B

EI9-

36V

and

18-7

5V5,

12,1

5V15

W24

.4 x

27.

9 x

8.9

Yes

U

LS36

to 7

5V3.

3,5,

12V

66W

1/16

Bric

kYe

s

U

WE

9-36

V an

d 18

-75V

5 an

d 15

V75

W1/

8 Br

ick

Yes

M

ER1

5V to

48V

5,9,

12,1

5V1W

19.6

5 x

6.15

x 1

0.15

Ye

s

U

EI9-

36V

and

18-7

5V3.

3,5,

12V

15W

, 30W

and

50/

60W

24.4

x 2

7.9

Yes

M

EV5V

or 1

2V5,

9, 1

2 or

15V

3W19

.65

x 7.

65 x

10.

15Ye

s

O

kam

iTM

2.4V

- 1

4V0.

59-5

.5V

4.95

WFr

om 1

0.4

x 16

.5 to

11.

9 x

20.8

x 8

.6No

Synq

or

P

ower

Qor

18V

- 75

V1.

8, 3

.3,5

,12,

15,2

8V10

0W -

728

WFr

om 1

/8 b

rick

to fu

ll br

ick

Yes

C

FQor

9-75

V5-

24V

105W

-150

W1/

4 br

ick

Yes

I

nQor

9-42

5V1.

2-48

V53

W-6

00W

1/4

bric

k an

d 1/

2 br

ick

Yes

N

iQor

3-16

V0.

75-3

.6V

58W

-120

W15

x 5

0 x

7.32

Yes

B

usQo

r35

-75V

9.6-

12V

331W

-600

WFr

om 1

/8 b

rick

to 1

/2 b

rick

Yes

29

Syst

em P

ower

: AC

to D

C Su

pplie

sFr

ont E

nd/ R

ectifi

erPo

wer

She

lves

Com

pact

PCI

Inpu

t Vol

tage

Outp

ut V

olta

geW

atts

/Pro

file

Wat

tsBa

ys W

atts

/Pro

file

GE E

nerg

y

C

AR12

V85

-264

VAC

12V

850

- 25

00W

/ 1u

C

AR24

/48V

85-2

64VA

C24

V- 4

8V12

00W

/ 1u

- 4

000W

/ 3u

E

pxx

Rect

ifier

85-2

64VA

C(-

53.5

V)80

0 -

1000

W /

1u

C

Pxx

Rect

ifier

85-2

64VA

C(-

54V)

- 5

4V12

00W

/1u

- 40

00W

/ 3u

C

ARxx

Rec

tifier

40-7

2 VD

C / 8

5-27

5 VA

C54

V20

00W

/1u

- 2

725W

/1u

S

PS P

latfo

rm80

0-10

00W

2-3

Bays

A

CE12

00-4

000W

3-5

Bays

C

PL P

latfo

rm20

00 -

272

5W3-

4 Ba

ys

C

MPx

x PC

I15

0/3u

- 4

00/6

u

D

MPx

x PC

I15

0/3u

- 4

00/6

u

LHV

Pow

er

H

i-Fle

x M

odul

ar P

ower

90-2

64VA

C1.

5V -

60V

1000

W/ 8

x5x2

.5in

O

pen

Fram

e90

-264

VAC

5V -

54V

40W

- 8

00W

/7.8

7x4.

13x2

.20i

n

U

Fra

me

90-2

64VA

C2V

- 5

8V15

0W -

800

W/8

x5x1

.60i

n

E

nclo

sed

90-2

64VA

C2V

- 6

0V15

0W -

800

W/8

x4x2

in

P

H220

Ser

ies

90-2

64VA

C10

0V-5

KV20

0W/ 3

u

L

HV S

erie

s90

-264

VAC

1KV

- 30

KV45

-60W

/ 9.7

3x7.

42x2

.125

in

Mea

n W

ell

E

nclo

sed

90-

370V

12, 2

4, 4

8V15

W -

3KW

/ 295

x127

x41m

m

L

ED90

- 30

5V12

- 54

V40

W -

320

W/

256x

90x4

3.8m

m

O

pen

Fram

e90

- 3

70V

+-

5, 1

2, 1

5V5W

- 2

50W

/ 177

.8x1

07.9

5x38

mm

M

odul

ar85

- 3

70V

1.6V

- 5

3V45

0W -

1KW

/ 254

x127

x63.

5mm

Mur

ata

Pow

er S

olut

ions

D

1U4C

S90

-264

VAC

12V,

3.3

/5Vs

b22

00W

/1u

D

1U-H

170-

264

VAC

-52

V, 1

2Vsb

2800

W/1

u

C

1U-W

90-2

64 V

AC 1

2V/4

8V, 3

.3Vs

b12

00W

/1u

D

1U4

90-2

64 V

AC 1

2V, 3

.3/5

/12V

sb12

00 -

160

0W/1

u

C

EF40

085

-264

VAC

12V,

5Vs

b40

0W/1

u

c

PCI2

00A

200/

3u

c

PCI2

00D

200/

3u

c

PCI3

25D

325/

3u

c

PCI3

50DC

350/

6u

c

PCI4

20DC

420/

6u

c

PCI5

00DC

500/

6u

S

1U S

helf

3600

-120

00W

3 Ba

ys

N2Po

wer

X

L AC

-DC

Serie

s12

V-56

VAC

12V-

56V,

5Vs

b37

5W/1

u

A

TX A

C-DC

Ser

ies

100V

-240

VAC

2.5V

- 2

4V, 5

Vsb

285W

/1u-

2u

Synq

or

A

CuQo

r E-S

erie

s85

-264

V12

-48V

800

-140

0W /

A

CuQo

r G-S

erie

s85

-264

V12

-48V

300

- 70

0W /

M

ultiQ

or E

-Ser

ies

85-2

64V

12-4

8V30

0 -

700W

/

sb

: Sta

ndby

Out

put

Display Technologies available from Nu Horizons

30

Cable Solutions Quadrangle

Displays Emerging Display Technologies (EDT) HT Displays LG Display Optrex OSD Displays Pervasive Display Sharp Tianma United Radiant Technology Corp. (URT)

Embedded Solutions / Single Board Computers Aaeon Axiom Tek Connect Tech Digi International IEI Technology Reach Technology

Inverters Applied Concepts ERG Microsemi

LCD Controller Solutions Amulet Technologies Digital View Estecom-USA Kordis URT

LCD Monitors Axiom Tek Estecom-USA IEI LG Display Touch Revolution

Open Frame/Panel PC Solutions Aaeon Axiom Tek Estecom-USA IEI Technology Landmark Nu Horizons Custom Solutions Touch Revolution Touchscreens Hantouch Touch International Touch Revolution

Active Enhancements: ■ Hi Bright Backlights: - CCFL - LED

Design Services: ■ System Hardware & Compatibility ■ ProductSpecification ■ Custom Test Set-up ■ POC / Prototype ■ First Article ■ Revision Control (ECN) ■ Engineering Evaluation ■ Problem Resolution

Display Technologies: ■ LCD - Active, Passive - Graphic - Color, Monochrome - Character - 3D ■ EPD - e-Paper, e-Ink ■ OLED - Organic Light Emitting Diode ■ PID - Public Information Display, Signage

Passive Enhancements: ■ Anti-ReflectiveAntiGlareGlass/Acrylic ■ EMI/RFI Shielding ■ IR Blocking Film ■ Optical Bonding ■ Privacy Filters ■ Protective Display Shields

Total Solutions: ■ DisplayKitVerification ■ Fully Enclosed LCD Monitors ■ Fully Enclosed LCD Systems (Panel PC’s) ■ LCD Testing and Screening ■ Medical ■ NEMA Rated Products ■ OpenFrameConfigurations ■ Rack and Panel Mount Assemblies

Touch Screen Integration: ■ Capacitive ■ Surface Acoustic Wave (SAW) ■ IR - Infrared Touch ■ Projected Capacitive - Extreme-Touch ■ Resistive - 4/5/8 Wire ■ Touch Controllers / Serial USB

Value-Add Capabilities: ■ Class 1,000 Clean Room for all LCD Enhancements ■ Display Inspection ■ NVIS Night Vision ■ Optical Glass Bonding ■ Touch Screen Integration ■ Functional Testing: - Power Cycling - Elevated Temperature Test - Video Testing / Calibration - Flat Panel - Pixel Screen - Extended Burn-in - Custom Test Creation / Execution - Touch Screen Calibration

T E C H N O L O G Y I N C .

w w w . n u h o r i z o n s . c o m / d i s p l a y s

Embedded Solutions / Single Board Computers available from Nu Horizons

Offering Embedded Computing Platforms so that

customers have a single, reliable, cost-effective source

to a wide array of CE, FCC & UL certified products.

These products include single board computers,

embedded systems and barebone systems, panel

computers, medical PC, human machine interfaces, and

network security appliances.

T E C H N O L O G Y I N C .

Supported Markets Medical

Military

Heavy Industrial

Consumer

Gaming & Entertainment

Point of Sale

Telecom

Supported Processors Intel

VIA

Xscale

Marvell

AMD

System on Module ■ETX

■STX

■Q7

■COM EXPRESS

■XTX

■SOM Baseboards

Industrial Motherboards ■Mini ITX

■Micro ATX

■ATX

Embedded SBC ■Pico ITX

■3.5” Capa Boards

■EPIC

■5.25 Boards

■RISC CPU Modules

■PC104

Servers Sun Micro

Super Micro

IBM

Panel PC/POS Solutions ■Medical Grade Touchscreen Computers

■Industrial Monitors

■Digital Signage

■Video Wall Controllers

■Heavy Industrial Monitors

■Rack Consol

■RISC Based monitor

Peripherals ■Memory (Flash, DDR, DDR2, DDR3)

■Heatsink/Fan Assemblies

■MiniPCI Module

■SA/PCI/PCI-X riser cards

■I/O cables

■LCD wiring kits

■Compact Flash

■HDD Drives

Add on Cards ■LCD converter

■FPGA

■Video Capture

■PCI-Express cards

■PC104 I/O Modules

■Wireless

■RFID

■Wireless Radio Modems

■CAN Controllers

Chassis ■1U to 6U

■Shoe Box

■Rackmount

■Compact

■Embedded

Power Solutions ■DC/DC

■Open Frame

■1U/2U Power supply

■UPS Module

■AC/DC

Software Microsoft, Linux Support

Technical Resources / Customization Resources ■Sheet Metail

■Industrial Design

■Silk Screening

■Custom Enclosures

31

Cable Solutions Quadrangle

Displays Emerging Display Technologies (EDT) HT Displays LG Display Optrex OSD Displays Pervasive Display Sharp Tianma United Radiant Technology Corp. (URT)

Embedded Solutions / Single Board Computers Aaeon Axiom Tek Connect Tech Digi International IEI Technology Reach Technology

Inverters Applied Concepts ERG Microsemi

LCD Controller Solutions Amulet Technologies Digital View Estecom-USA Kordis URT

LCD Monitors Axiom Tek Estecom-USA IEI LG Display Touch Revolution

Open Frame/Panel PC Solutions Aaeon Axiom Tek Estecom-USA IEI Technology Landmark Nu Horizons Custom Solutions Touch Revolution Touchscreens Hantouch Touch International Touch Revolution

w w w . n u h o r i z o n s . c o m / d i s p l a y s

Semiconductor Technologies available from Nu Horizons

• Audio (DACs, ADCs, Codecs, SPDIF, Sample Rate Conv., DSP, USB) • Memory (EEPROM, DAC + EEPROM) • Networking (T1/E1/T3/E3 xcvr, PCM) • Sensors (Hall Effect Sensor, 3d Compass) • Video (NTSC/PAL Encoder/Decoder, A/V Switches, Video Gain Amp)

• Discrete (Transistors, FET arrays, Thyristors, Triacs) • Display (Vacuum – Fluorescent Display Drivers) • LED Drivers (Constant Current Drivers) • Motor Control (Brushless DC, Bi-Polar Stepper) • Power (Linear Regulators, Buck/Boost/Fly back DC- DC, Charge Pumps) • Sensors (Hall Effect)

• Analog (Data Conversion, Power Management) • Communications (Bluetooth, LIN, CAN, POTS, GPS, RF, Zigbee) • Memory (Flash, EEPROM, Modules) • Microcontrollers (8051, AVR, ARM7TDMI, ARM926EJ, Cortex M3) • Multimedia & Imaging (IR, Video) • Network Storage (Data Storage) • Programmable Logic (FPGA, SPLD/CPLD) • Sensors (Biometrics, RF, Smart Cards)

• Converters (ADCs, DACs) • Signal Conditioning (Amplifiers, Comparators) • Video (Filters, Amplifiers)

• Fiber Optic Devices (10G FP TOSA & MM PIN ROSA, OTDR FP Lasers, 2.5G DWDM DML, DFB TOSA & APD ROSA) • Optocouplers (Transistor Output, High Speed, Solid State Relays) • RF Modules (Zigbee) • RF Semiconductors (RFIC Switch, GaAs FET, GaAs PA, Si LD-MOSFET, CATV Hybrid, Si RFIC)

• Power and Battery Management (IGBT and MOSFET gate drivers) • Sensor and Imaging Arrays (Hall Effect Sensors) • Signal Conditioning (Solid State Relays, Optocouplers) • Telecom (Embedded Modem, MF Trunk signaling, DTMF)

• Imaging Solutions (Fax Modems, Fax and MFP System Solutions, Digital Photo Frames) • Audio (Speakers-on-a-Chip, PC HD-Audio, PC HD- Audio Modem Combo) • Video (MPEG Encoders/Codecs, Video Decoders, Demodulators, Surveillance / Security) • Dial-Up Access Modems (PC Dial-Up Modems, Embedded Dial-Up Modems)

• Wireless (Bluetooth modules, ZigBee modules, 802.11 modules)

• Device Server Modules • Embedded MCU / MPU (ARM7TDMI, ARM9926EJ) • Networking Modules (Wired/Wireless 802.3 / 802.11bg / 802.15.4)

• Data Converters (ADCs, DACs) • Interface (PLB / PCI / I2C / SPI / USB UARTs, RS232/485/422 Transceivers) • Power (Buck/Boost Regulator’s, Charge Pumps, LDO’s, Supervisors, PWM, Programmable Power) • Storage (Data Reduction, Data Security) • Telecom (T1/E1/DS1/DS3/E3 LIU’s, Carrier ETH SONET/SDH Framers, Mappers & Aggregators)

(Fiber Optics Division) • Optical Components (WDM Management, 850nm VCSELs & Detectors, 1310nm Lasers & Detectors, CML Transmitters,WSS) • Optical Transceivers (GBIC, XFP, MSA300, SFP, SFP+) • Passive Optics (WDM networks)

• AC-DC Power Supplies (800W - 4,000W) • DC-DC Converters - Industry Standard (1/16-Brick, 1/8-Brick, 1/4- Brick, 1/2-Brick, 1x1”, 2x1”) - Intermediate Bus Converters (1/8-Brick, 1/4- Brick) - PowerAmplifiers(1/2-Brick, Full Brick) • Power & Battery Management (Power Modules) • Power Systems Engineering Services

• Audio (SerDes with Emebed/De-Embed) • Datacom (Cable & Backplane SerDes, Redrivers, Retimers, PCIe Bridges, Crosspoint Switches, TIAs, LAs, Transceivers) • Video (Equalizers, Cable Drivers, Reclockers, SerDes, Video Optical Modules, TIAs, LAs, Laser Drivers, Timing, Crosspoint Switches, Cable Extenders)

• Memory (DDR DRAM,SDRAM, EDO & FPO DRAM, E2PROM, PSRAM, SRAM, DDR II Synchronous SRAM, Asynchronous SRAM) • Smart Card (Two-Wire Serial EEPROM, Secure, MCU Based, ICs)

• Power (MOSFET, IGBT, Diodes, Thyristors, DC/DC, PWM Control, LED/Lamp/Display Drivers) • RF Power (FETs, Drivers, Amplifiers, Microwave modules, RF Modules) • Solar Devices (Solar Cells, Solar Bits, Solar Die, Solar Battery Chargers)

(Formerly Oki and Rohm Semiconductor) • Audio (CODECs, DACs, Amplifiers ) • Display Drivers (LCD / VFD Driver / Controllers) • Embedded MCU / MPU (4-Bit NX 63K / ARM7TDMI / ARM946E / Biometrics) • Memory (P2ROM, DRAM ) • Speech (BGM Mixer - ADPCM & ADPCM2, Voice Synthesizers & Recorders, Audio Codec) • Telecom (ADPCM – Linear – PCMA-Law - VoIP Codec’s, Echo Cancellers, Transceivers) • Video (NTSC / PAL / SECAM Encoders – Decoders, NR-FIFO)

• Programmable Clock Devices (Clock Generation, Differential Clock Distribution, Universal Fanout & Zero Delay Buffer, Clock Synthesis, Low Jitter SERDES Clock) • Programmable Power Manager Devices (for Processors, DSPs & Board Level; Watchdog timer, Voltage Supervision, Reset Generation, Sequencing, Voltage Measurement, Trimming & Marginning) • Programmable Logic (Non-Volatile Flash FPGA, SRAM FPGA, SERDES, 8/32 Bit Soft Processor, Ultra-Low Power CPLD, SPLD)

• Power Supplies - High Voltage (1 to 5 W, 10 to 200 W, Custom) - Low Voltage (Modular, Desktop, Wallmount, Medical, Open-Frame, U-Frame, Enclosed, LED Lighting, Custom)

• Data Converters (Delta Sigma, SAR, Voltage DAC, Current DAC) • Frequency Control (Silicon Timing) • Interface (RS-232, 422/485, CAN PHY) • Power Management (Switching Regulators, Linear Regulators, DC/DC µModules, LED Drivers, Hot Swap, PoE) • Signal Conditioning (Amplifiers, Comparators, Filters, Voltage References, Thermal Couple Compensators) • Wireless / RF (I/Q Modulators – Demodulators, Up & Down Converting Mixers, IF Amplifiers, PA, RF Log Detectors, RF Power Detector)

• Video (Video Encoders, Transcoders, Decoders, SoCs, Coprocessors)

• Data Communications (10/100/1G/10G Ethernet Switches, 10/100/1000/10G PHYs) • Embedded MCU / MPU (ARM V5TE, PXA StrongARM, PPC & MIPS Systems Controller) • Power Management (POLA) • Storage (FAS/SATA/PATA, SAS/Fiberchannel, Storage Processors) • Video (Format Converter) • Wireless / RF (802.11 Modules)

32

• AC/DC Power Supplies (Enclosed, DIN Rail, Open Frame, LED, Modular, Rack Power, Charger, Adaptor, Specific Purpose) • DC/DC Power Supplies (Modular, On Board, PBC, Enclosed)

• Analog (Drivers / Voltage & uC Supervisors / Filters / Switches / Regulators) • Bus Device ICs (USB / PC / PCMCIA / SMBus) • Ethernet (10/100/1000 PHYs, Controllers, Switches) • Linear ICs (Active Filters / Comparators / Op Amps / References / Timers) • Power Management ICs (Battery, Display, Hot- Swap, PCI/PCIX/PCIE, High Side, LDOs, DDR) • Precision Edge ICs (Clock distribution, generation, synthesizers / Multiplexers, PLLs, buffers, CDRs) • RF (290 – 980 ISM band / ASK/FSK / 200kbps max data rate, RF Modules) • System Management ICs (Fan Control / Thermal Supervisor I2C)

• DRAM (DDR3 SDRAM, DDR2 SDRAM, DDR SDRAM, SDRAM, RLDRAM, PSRAM) • DRAM Modules (FBDIMM, RDIMM, SODIMM, UDIMM) • Mobil DRAM (Mobil SDRAM, Mobil DDR SDRAM) • Multichip Packages (MobilDRAM & NAND Flash Combinations) • NAND Flash Memory (Managed NAND, High Speed NAND, Solid State Storage, Embedded USB)

(Formerly C&D Technologies) • AC/DC Power Supplies (200 – 2000 Watts, 2.5VDC to 48 VDC Out – PCI Modules) • Data Acquisition (Electronic Imaging, A/D Converters, D/A Converters, Sample/Hold Amplifier, Multiplexers) • DC/DC Converters (0.25 to 340 Watts, 0.02 to 80 Amps, 1.2 to 48 VDC Out; 3 to 75 VDC In) • Digital Panel Meters (Voltmeters, Wire Meters, Process Monitors, AC/DC Ammeters) • Magnetics (Inductors & Transformers, Differential common-mode filters, Databus Isolators)

• AC-DC Power Supplies (125W-375W, 3.3vdo to 56vdo, 90-264vao in, 3”, 3.3” x 5” format) • DC-DC Open Frame Power Supplies (125W, 160W, 3.3-48vdo 3” X 5” format) • Power Systems Engineering Services

• Wireless/RF (2.4G / 900M / 433M Transceiver, MCU based RF, Audio streaming)

• Communications (Voice & Audio CODECs, Pro-X SLICs, USB Audio Codec) • Logic ICs (I/O Controllers, ISA Bridge, Power Management, Hardware Monitors, Clock Generators, Power I/C, Card Reader IC’s, IEEE1394) • MPU (8-bit 80C51 based, 32-bit ARM7TDMI) • Power (ACPI Controller, PWM, DDR Bus Term, Power Switch) • Voice Solutions (Record & Playback ICs)

• Analog Image Sensor (NTSC/PAL) • Digital Image Sensor (CIF, VGA, 1.3M / 2.0M / 3.2M / 5.17M Pixel) • Image Processors

(Including SaRonix)

• Analog Switches (3-17V SPDT-SPST-DPST-MUX, Custom HDMI/DVI-PCI-USB-LAN) • Bridges (PCI, PCIX, PCI Express – 32/64Bit – 66/133MHz) • Clock ICs ( VCXOs, Buffers, Drivers, Generators, Skew Controllers) • Crystals & Oscillators (Quartz Crystal Resonators) • Digital Switches (2-Port, Bus, Crossbar, DDR, Mux/DeMux, Low Voltage Translator) • Interface (Re-Drivers, Buffers, Flip-Flops, Gates, Latches, Registers, Transceivers, Voltage Translators) • Logic (ALVC, FCT, LCX, LPT) • PCI Express Solutions (Packet/Signal Switches, Bridge, PHY, Signal Conditioning, Clock-Buffers/ Generators/Crystals) • Translators (Voltage, I/O Signal)

• Frequency Control (Oscillators, Crystals, VCXO, TCXO, OCXO, Sine Wave Oscillator)

• Communications (CAN, LIN, ZigBee) • Discrete (Diodes, Power MOSFETS, Thyristors, Triacs, Transistors) • Embedded MCU / MPU (8/16/32 Bit MCUs) • Logic (Standard – High/Low Voltage, Interface, Multi-Purpose) • Memory (Fast Flash, Low Power SRAM, EEPROM)

Optoelectronics (LED Modules/Arrays, LED Tube, Outdoor Lighting, BLU, Automotive) LEDs (Middle Power, High Power, Flash LED)

• Power (High Reliability Transistors)

• Flat Panel Displays (LCD – 2” to 65”) • Memory (Flash – NOR) • Optoelectronics (LEDs, LED Modules, Laser Diode, Photocoupler, IrDA, photo interrupters, Emitters/ Detectors, Sensors) • Power (LDO / Switching Regulators, LED Drivers, Solid State Relays)

• Digital Video Processors • Storage Products (Serial ATA - Parallel ATA, Parallel ATA Controller, RAID Storage Processors, SATA Controllers, SATA Port Multipliers) • Video Transport (HDMI, DVI and iTMDS Products - Receivers, Transmitters, Switches, PHYs)

• Controllers (Flash Memory Card Controller, USB Flash Controller) • Embedded Graphics (128-bit 2D/3D mobile graphics engine, Mobile Graphics Coprocessor) • Mobile Communication (Mobile Satellite TV Tuner IC) • Multimedia SoC (MP3/WMA Digital Audio Player, USB 2.0 Megapixal Image Controller)

• Advanced I/O Controllers (USB-ATA, Southbridge) • Data Communications (10/100 MAC/PHY Controller, 10/100PHY, Multimedia Processors, ArcNET, CircNET, USB Ethernet) • Environmental (Temperature Sensors, Fan Control) • USB Solutions (Card Reader, Flash Drive, Disk Drive, Hub, PHY)

• Power Management (AC/DC, Battery Management, DC/DC, LDO, MPU - Supervisor, PoE, VDC References, AC Switches) • Discretes (Thyristors, Diodes, FETs, Transistors) • Signal Conditioning (Comparators, Op-Amps, Clamp Diode Arrays, Crowbar Diodes, EMI Filtering) • Logic (3.3V, 5V, Translators, Gates, Switches, Port - Expansion) • Sensors (Accelerometers, Proximity, Thermal, Touch) • Interface (Smartcard) • Wireless (Bluetooth, ZigBee, GPS, RFID) • Audio (Decoders, Power Amps, Analog CPU, Digital CPU, Radio) • Image Sensor (Camera Modules, Imaging Signal Processor, CMOS Arrays) • Video (Demodulator, Decoders) • Motor Control (Controllers, Drivers, MCU’s) • Microcontrollers (8-bit, 16-bit, ARM7TDMI, ARM926E, Cortex M3)

• Optoelectronics (LED Drivers, EL Lamp Drivers) • Power (Switching, Automotive, PFC, Backlight, LDO, High Voltage Interface / Driver’s, PoE) • Transducers (Ultrasound)

• AC/DC Power Supplies (Industrial and Medical - 300W - 1500W) • DC/DC Converters - Industry Standard (1/8-Brick, 1/4-Brick, 1/2- Brick, Full Brick) - Non-Isolated Point of Load - Intermediate Bus Converters (1/8-Brick, 1/4- Brick, 1/2-Brick)

• Memory (SDRAM / DDR1, Pseudo SRAM, Serial Flash, Parallel Flash)

• Filters • Inductors • Isolators • Transformers (Modem, Analog/Voice Switching, DSL, Cable Modem, RJ45, PoE)

• AC/DC Power Supplies (Medical, Easy Swap, 1U, 2U, 3U, PS2, PS2+) • DC/DC Power Suppliers (Open Frame)

33

ExarLinear TechnologyMicrel

NuvotonSMSCST

SYSTEM MONITORING

Clock DistributionExarLatticeMicrelPericomST

Clock GenerationAKM SemiconductorExarGennumLatticeLinear TechnologyMicrelPericom / SaRonixPletronics

Crystals, Oscillators, Drivers, Buffers, PLLs

TIMING

A/D AKM SemiconductorCadekaExarLinear TechnologyMurata Power SolutionsNuvotonST

D/AAKM SemiconductorCadekaLinear TechnologyMurata Power SolutionsST

CONVERTERS8-BitAtmelISSILapis SemiconductorLattice (soft processor)NordicNuvotonRenesas ST

16-BitRenesasST

CENTRAL PROCESSOR

POWER & BATTERY MANAGEMENTBattery ManagementAllegro MicrosystemsLinear TechnologyMicrelST

DiscretesAllegro MicrosystemsIXYSMurata Power SolutionsRenesasSemicoaSTSupertexWurth Midcom

Hot SwapLatticeLinear TechnologyMicrelSupertex

Linear Regulators &ReferencesAllegro MicrosystemsAtmelExarLapis SemiconductorLinear TechnologyMarvell (modules)MicrelSharp MicroelectronicsSTSupertex

Motor ControlAllegro MicrosystemsST

POELinear TechnologySTSupertex

Power ManagementExarIXYSLatticeLinear TechnologyMarvellMicrelMurata Power SolutionsST

Power Modules GE EnergyLinear TechnologyMarvellMurata Power SolutionsSynQor

SwitchingAllegro MicrosystemsExarLapis SemiconductorLinear TechnologyMarvellMicrelSTSupertex

Allegro MicrosystemsAKM Semiconductor AtmelClareLapis SemiconductorNuvoton

OmnivisionSharp MicroelectronicsSMSCST

SENSORS AND IMAGING ARRAYS

DiscretesSTWurth Midcom

DriversGennumMicrelSTSupertex

AmplifiersCadekaLinear TechnologyMicrelST

IsolationCELClarePericomSharp MicroelectronicsST

ComparatorsCadekaLinear TechnologyMicrelST

FiltersLinear TechnologyMicrelSTWurth Midcom

SIGNAL CONDITIONING

POWER SUPPLIESAC-DC Low Power LHV PowerMean WellMurata Power SolutionsN2PowerZippyMedium Power LHV Power Mean Well Murata Power SolutionsN2PowerSynQorZippyHigh Power GE EnergyLHV Power Mean Well ZippyFront End GE EnergyLHV Power Mean Well Murata Power SolutionsZippyMedical LHV Power Mean Well SynQorZippy

DC-DC Industrial Isolated / Industry Standard Bricks /Non-Isolated Point of LoadGE EnergyLHV Power Mean WellMurata Power SolutionsSynQor

Open FrameLHV Power Mean Well N2PowerZippy

Board Level ModulesIntermediate Bus ConvertersGE EnergyMurata Power SolutionsSynQor

Memory & Processor PowerMurata Power Solutions

InfraredSharp Microelectronics

LasersFinisar

LED DisplaysOptrexMurata Power Solutions

LED Arrays / ModulesSamsung LEDSharp Microelectronics

LEDs / Laser DiodesSamsung LEDSharp Microelectronics

Optical SystemsCELFinisarGennum

OptoCouplersCELSharp Microelectronics

OPTOELECTRONICS

34

8-BitAtmelISSILapis SemiconductorLattice (soft processor)NordicNuvotonRenesas ST

16-BitRenesasST

32-BitAtmelDigiLapis SemiconductorLattice (soft processor)MarvellNuvotonRenesasST

CENTRAL PROCESSOR

ModemConexantST

VoIPLapis SemiconductorMarvellNuvoton Renesas

TransceiversClareExarFinisarGennumMarvellST

TELECOMCentralOffice(CODECs, SLICs, DAA, xDSL)AtmelClareConexantExarLapis SemiconductorNuvoton RenesasST

SwitchingExar

ISMAtmelLattice MicrelNordicST

RFIDAtmelLattice ST

802.11 a/b/g/nConnectBlueDigiMarvellSharpST

MicrowaveCELIXYSLattice

BluetoothConnectBlue

ZigBeeAtmelCELConnectBlueLapis SemiconductorRenesasST

Discretes (RF)AKM SemiconductorAtmelCELIXYSLTCMicrelSTWurth Midcom

GPSAtmelST

WiMaxSharp Microelectronics

WIRELESS

ParallelLattice NuvotonPericom

Low Speed Serial (under 1 MB/sec) Exar Lapis SemiconductorLattice Linear TechnologyMicrelRenesas SMSC ST

High Speed Serial(above 1 MB/sec) GennumLattice MarvellMicrelPericom Renesas SMSCST

Level TranslatorsAtmelLattice Linear TechnologyMicrelPericomST

BUS INTERFACE

DATACOMEthernet MACMarvellMicrelSMSC ST

WAN / TransportExarGennumMarvell

Ethernet SwitchingMarvell

USBRenesasSilicon MotionSMSC

OpticalConexantFinisarGennum

Non-VolatileEPROMAtmelLapis SemiconductorST

E2PROMAKM SemiconductorAtmelISSIRenesasST

FlashAtmelISSIMicronRenesasSharp MicroelectronicsWinbond

Storage ControllersSilicon MotionSMSC

VolatileDRAMISSILapis SemiconductorMicronWinbond

SRAMAtmelISSIRenesasSharp MicroeletronicsSTWinbond

FIFOLapis Semiconductor

MEMORY

ASICAtmel

CPLDAtmelLattice

FPGAAtmelLattice

LOGICSPLDAtmelLattice

StandardMurata Power SolutionsPericomRenesasST

EthernetLatticeMarvellMicrelSMSCST

Transformers / IsolatorsWurth Midcom

PHYSICAL LAYER

AKM SemiconductorCadekaConexantGennumLapis SemiconductorLattice Magnum

MarvellNuvotonOmnivisionSilicon ImageSilicon Motion ST

AUDIO / VIDEO

DISK / INTERFACESAS/SCSIMarvell

SATA/ATAAtmel Exar MarvellSilicon ImageSMSC

FibreChannelLattice Marvell

Solid StateMicronSilicon MotionSMSC

35

LabCam delivers online training opportunities in a way that recognizes the value of engineers’ time. As easily as You Tube® videos, engineers can quickly load and watch videos from industry leaders consisting of insights on products, evaluation kit overviews, end-user applications and more. Each tutorial is up to ten minutes in length and features technology experts, CEOs and/or peers introducing new solutions or explaining integral aspects of an important product, solution or application. This free value-added program is packaged for short, informative and high quality distance learning.

Nu Horizons is proud to present our education and training program, which offers engineers the opportunity to participate in technical seminars conducted by experts focused on the latest technologies from our leading suppliers. This program provides higher velocity learning to help minimize start-up time to quickly begin your design process utilizing the latest development tools, software and products. Check online for the latest seminar schedule.

In order to simplify the design process, Nu Horizons has created a series of application notes designed to guide engineers through the process of interfacing different devices together. Using a detailed step-by-step approach, these design guides identify key elements in the design process. Topics in the application notes are organized by design task and each topic is a stand-alone section, with a short introduction or overview, followed by the step-by-step design guidelines. All steps include a sufficient level of detail to provide the designer with relevant information to proceed quickly and easily from start to finish.

Nu Horizons offers a wide range of development / evaluation boards, tools and kits featuring the latest technology from the most trusted suppliers in the industry. Visit the development tool section of our website for a variety of solutions all aimed at providing a low-cost solution for designers to accelerate a product’s time-to-market.

www.nuhorizons.com/labcam

www.nuhorizons.com/seminars

www.nuhorizons.com/appnotes

Application Notes

DevelopmentTools

www.nuhorizons.com/devtools

Portal is a quarterly publication containing new products, technologies and development tools available from Nu Horizons leading suppliers. Portal is availabe both in print and on the web. Sign up online to receive your copy, be notified of upcoming issues or to request samples of the products found inside.

www.nuhorizons.com/portal

Enhance Your Design...wITH NU HORIzONS EDUCATION AND DEVELOPmENT SOLUTIONS

Date post:	01-Oct-2014
Category:	Documents
Upload:	nu-horizons
View:	2,025 times
Download:	1 times

Nu Horizons Q1 2012 Edition of Portal

Documents