October’s 2010 - 50 Backlink Packet

First I would like to thank you for subscribing to Paul’s Quality Backlinks; I assure you that you will really

enjoy this service and the quality of the backlinks I provide. Also, before you start link building, there’s

some important information you should know regarding backlinks.

You may have heard from people that do not have complete knowledge about Search Engine algorithms,

say that leaving your link on an “inner page” that has a low or 0 Page Rank inside of a high Page Rank

domain will do your link no good. This is completely false.

I have several websites ranking very high on the first page of Google (five of which, are number one) out

of hundreds of thousands of competing sites. The demo site (http://howtomakeadiapercakehq.com) that I

use for these links, is sitting on the first page of Google, on the 1st

spot out of over 338,000 sites for the

keyword “how to make a diaper cake”, this site also carries a Page Rank of 4. I have done all this by using

this same method of linking in inner pages of high PR authority sites. These links are simply amazing, and

they will do wonders for your keywords & sites. Imagine if you only have to complete with 250,000 or less

competing sites, you will be able to dominate your competition!

Matt Cutts, the head of Google’s webspam team was asked about above statement, but he couldn’t give a

straight answer due to the question being too close to Google’s algorithm. You will find part of the

interview below.

“Stephan Spencer: OK. So, I guess, a follow on to that would be: a .edu and .gov link, and so forth,

has, typically, a more pristine link neighborhood, so it is not just about the PageRank, right? The link

neighborhood comes into play.

Matt Cutts: That is a little bit of a "secret sauce" question, so I am not going to go into how much we

do trust that sort of stuff.

Stephan Spencer: OK. I am going to slap my wrist now. Ouch, ouch!

Matt Cutts: [laughing]”

For the entire interview: http://www.stephanspencer.com/search-engines/matt-cutts-interview

Note: If you’re not already subscribed to Angela V. Edwards monthly backlink packets, I highly urge you to

do so now. Angela is a long time member of the Warrior Forum, and she has a program that provides you

with 30 new High Page Rank (PR.4 – PR. 9) backlinks at the cost of only $5 per month, with your first

packet being free. We are not in any way competing with each other, but rather working as a team to

provide you with the largest amount of the highest quality backlinks you can obtain every month. With

both of our programs combined, you will get the maximum search engine results that you can get without

spending hundreds or even thousands of dollars a month.

Click here for Angela’s program: http://www.easybacklinkbuilder.com/

http://www.theyoungturks.com/ - Page Rank 4

First you will want to create an account

Registration Link: http://www.theyoungturks.com/newuser

After you have created an account, click on “My Preferences” link

To create your anchor text, use your HTML code in the “Bio” section

HTML code: <a href="http://www.yourdomain.com">Your Keyword</a>

To see the public view of your anchor text, click on your username

Here’s the public view of your anchor text links

http://wolvix.org/ - Page Rank 5

First you will need to click on the tab that says “Forums”

Now you will need to register a new account

Once you have registered, click on “Profile” link

Next, click on the link that says “Forum Profile Information”

To create your anchor text, use your BBC code in the “Signature” section. You can also

put your URL in the section that says “Website URL” and place your keyword in the “Website

title” box. Your title will become your anchor text keyword

BBC Code: [url=http://www.yourdomain.com]Your Keyword[/url]

To see the public view of your anchor text, click on the links that says “summary”

Here’s the public view of your anchor text links

http://www.magicbullets.com/ - Page Rank 4

First you will need to click on the tab that says “Forums”

Now you will need to register a new account.

After you have registered, click on “User CP” link

Next, click on “Edit Signature”

You are given a WYSIWYG editor to create your anchor text links in the “Signature” section

To see the public view of your anchor text links, just click on your username

Here’s the public view of your anchor text links

http://www.cplusplus.com/ - Page Rank 7

First you will want to register

Registration link: http://www.cplusplus.com/member/signup.form

Once you have registered, click on “user cp” link

Next, click on “Edit your public profile” link

Now put your Website URL on the “Website” section

Once you saved your changes, you will be taken to the public view of your anchor text links

http://www.flyfishing-and-flytying.co.uk/ - Page Rank 4

First you will need to click on the tab that says “Forums”

Now, you will need to register a new account

Once you have registered, click on “Edit my profile” link

To create your anchor text, use your HTML code in the “Bio” section

HTML code: <a href="http://www.yourdomain.com">Your Keyword</a>

To see the public view of your anchor text, click on “Forum Home”

Then click on your username in the “Active Members” section

Here’s the public view of your anchor text links

http://www.nashvillenews.org – page Rank 4

First you will want to register

Registration Link: http://www.nashvillenews.org/index.php/member/register

After you have registered, you will need to go to

http://www.nashvillenews.org/index.php/member/login

Next, you have to go to http://www.nashvillenews.org/index.php/member/profile and click on

“Edit Profile”

To create your anchor text, use your HTML code in the “Bio” section

HTML code: <a href="http://www.yourdomain.com">Your Keyword</a>

To see the public view of your anchor text, click on your username

Here’s the public view of your anchor text links

http://canadianmeatgoat.com – Page Rank 4

First you will need to click on the tab that says “Forum”

Now, you will need to register a new account

Next, click on “Control Panel” link

Then click on “Edit Profile” link

To create your anchor text, use your HTML code in the “Bio” section

HTML code: <a href="http://www.yourdomain.com">Your Keyword</a>

To see the public view of your anchor text, click on your “Your Public Profile” link

Here’s the public view of your anchor text links

http://home.inklingmarkets.com/ - Page Rank 5

First you will want to register

Registration link: http://home.inklingmarkets.com/user/self_invite

Once you have registered, click on your username, you will see a drop down menu, click on “Edit

your profile” link

To create your anchor text, use your HTML code in the “Anything else you'd like everyone to

know?” section

HTML code: <a href="http://www.yourdomain.com">Your Keyword</a>

Once you saved your changes, you will be taken to the public view of your anchor text links

http://flixel.org/ - Page Rank 5

First you will need to click on the tab that says “Forums”

Now, you will need to register a new account

Once you have registered, click on “Profile” link

Next, click on the link that says “Forum Profile Information”

To create your anchor text, use your BBC code in the “Signature” section. You can also put your

URL in the section that says “Website URL” and place your keyword in the “Website title” box.

Your title will become your anchor text keyword

BBC Code: [url=http://www.yourdomain.com]Your Keyword[/url]

To see the public view of your anchor text, click on the links that says “summary”

Here’s the public view of your anchor text links

http://www.androsasoft.net/ - Page Rank 4

First you will need to click on the tab that says “Support Forum”

Now you will need to register a new account.

Once you have registered, click on “Profile” link

Next, click on the link that says “Forum Profile Information”

To create your anchor text, use your BBC code in the “Signature” section. You can also

put your URL in the section that says “Website URL” and place your keyword in the “Website

title” box. Your title will become your anchor text keyword

BBC Code: [url=http://www.yourdomain.com]Your Keyword[/url]

To see the public view of your anchor text, click on the links that says “summary”

Here’s the public view of your anchor text links

http://www.wannasurf.com/ - Page Rank 6

First you will want to register

Registration Link:

http://www.wannasurf.com/community/index.php?option=com_comprofiler&task=registers

Once you have registered, put your mouse over the “Community” tab, you will see a drop down

menu, click on “Edit”

Next, click on “About Me” tab. You are given a WYSIWYG editor to create your anchor text links

To see the public view of your anchor text, put your mouse over the “Community” tab, you will

see a drop down menu, click on “View”

Here’s the public view of your anchor text links

http://saxontheweb.net/ - Page Rank 5

First you will need to click on the tab that says “SOTW Forum”

Now you will need to register a new account

Once you have registered, click on “Settings” link

Next, click on “Edit Signature” link

You are given a WYSIWYG editor to create your anchor text links in the “Signature” section

To see the public view of your anchor text links, just click on your username

Here’s the public view of your anchor text links

http://www.open-blog.info/ - Page Rank 4

First you will need to click that says “Forum”

Now you will need to register a new account

Once you have registered, click on “Profile” link

Next, click on “Signature” link

To create your anchor text, use your BBC code in the “Signature” section.

BBC Code: [url=http://www.yourdomain.com]Your Keyword[/url]

To see the public view of your anchor text, click on your username

Here’s the public view of your anchor text links

http://www.wesabe.com/groups - Page Rank 7

First you will need to click that says “Sign in”

Now you will need to sign up for a new account

Next, click on your username

Then put your Website URL on the “Your Website” section

To see your public anchor text, put your mouse over the “View my Profile” tab, you will see a

drop down menu, click on “View My Profile”

Here’s the public view of your anchor text links

http://redesenred.net/ - Page Rank 4

First you will want to register

Registration link: http://redesenred.net/pg/register/

Once you have registered, click on your profile icon

Next, click on “Edit profile” link

You are given a WYSIWYG editor to create your anchor text links in the “About Me” section. And

make sure it is “Public”

Once you saved your changes, you will be taken to the public view of your anchor text links

http://www.gamertagradio.com/cmps_index.php - Page Rank 5

First you will need to click that says “Forums”

Now you will need to register a new account

Once you have registered, click on “Profile” link

Next, click on “Edit Signature” link

You are given a WYSIWYG editor to create your anchor text links

To see the public view of your anchor text, click on your username.

Here’s the public view of your anchor text links

http://www.evantaubenfeld.com/ - Page Rank 5

First you will need to click that says “forum”

Now you will need to register a new account

Once you have registered, click on “Settings” link

Next, click on “Edit Signature” link

You are given a WYSIWYG editor to create your anchor text links in the “Signature” section

To see the public view of your anchor text, click on your username

Here’s the public view of your anchor text links

http://www.givengain.com/cgi-bin/giga.cgi? – Page Rank 6

First you will want to sign up

Registration Link: https://www.givengain.com/cgi-bin/giga.cgi?cmd=join

After you have signed up, click on “Settings” link

To create your anchor text, use your HTML code in the “Bio” section

HTML code: <a href="http://www.yourdomain.com">Your Keyword</a>

To see the public view of your anchor text, click on “My Profile”

Here’s the public view of your anchor text links

http://elgg.to-gather.org/ - Page Rank 4

First you will want to register

Registration link: http://elgg.to-gather.org/pg/register/

Once you have registered, click on your profile icon

Next, click on “Edit profile” link

You are given a WYSIWYG editor to create your anchor text links in the “About Me” section. And

make sure it is “Public”

Once you saved your changes, you will be taken to the public view of your anchor text links

http://www.geograph.org.uk/ - Page Rank 5

First you will want to register

Registration link: http://www.geograph.org.uk/register.php

Once you have registered, click on “view your profile” link

Next, click on “Edit your profile” link

Now, put your Website URL on the “Your website” section

To see the public view of your anchor text links, just click on profile

Here’s the public view of your anchor text links

http://www.qohf.org/ - Page Rank 4

First put your mouse over the “Home” tab you will see a drop down menu, click on the tab that

says “Online Forums”

Now, you will need to register a new account

After you have registered, you will need to click “Profile” link

Next, click on the link that says “Forum Profile Information”

To create your anchor text, use your BBC code in the “Signature” section. You can also put your

URL in the section that says “Website URL” and place your keyword in the “Website title” box.

Your title will become your anchor text keyword

BBC Code: [url=http://www.yourdomain.com]Your Keyword[/url]

To see the public view of your anchor text, click on the links that says “summary”

Here’s the public view of your anchor text links

http://www.infoprix.ca/ - Page Rank 4

First you will need to click on the tab that says “Forum”

Now, you will need to register a new account

After you have registered, you will need to click “Profile” link

Next, click on “Personality”

To create your anchor text, use your BBC code in the “Signature” section

BBC Code: [url=http://www.yourdomain.com]Your Keyword[/url]

To see the public view of your anchor text, click on “Profile” link again

Here’s the public view of your anchor text links

http://www.typeamom.net – Page Rank 5

First you will want to register

Registration Link:

http://www.typeamom.net/index.php?option=com_comprofiler&task=registers&Itemid=10005

7

After you have registered, put your mouse over the “Mom Network” tab, you will see a drop

down menu, click on “Edit My Profile

Next, click on “Edit” link

Now put your mouse over the “Edit” tab, you will see a drop down menu, click on “Update Your

Profile”

Next, click on the “About Me” page

You are given a WYSIWYG editor to create your anchor text links in the “About Me” section

Once you saved your changes, you will be taken to the public view of your anchor text links

http://gfmd.info/ - Page Rank 6

First you will want to register

Registration link: http://gfmd.info/index.php/member/register

After you have registered, you will need to go to http://gfmd.info/index.php/member/login

Next, you have to go to http://gfmd.info/index.php/member/profile and click on “Edit Profile”

To create your anchor text, use your HTML code in the “Bio” section

HTML code: <a href="http://www.yourdomain.com">Your Keyword</a>

To see the public view of your anchor text, click on your username

Here’s the public view of your anchor text links

http://www.deafcando.org.au – page Rank 4

First you will want to register

Registration Link: http://www.deafcando.org.au/index.php?/member/register

After you have registered, you will need to go to

http://www.deafcando.org.au/index.php?/member/login

Next, you have to go to http://www.deafcando.org.au/index.php?/member/profile

and click on “Edit Profile”

To create your anchor text, use your HTML code in the “Bio” section

HTML code: <a href="http://www.yourdomain.com">Your Keyword</a>

To see the public view of your anchor text, click on your username

Here’s the public view of your anchor text links

http://www.heartkidsnsw.org.au – Page Rank 4

First you will want to register

Registration Link: http://www.heartkidsnsw.org.au/index.php/member/register

After you have registered, you will need to go to

http://www.heartkidsnsw.org.au/index.php/member/login

Next, you have to go to http://www.heartkidsnsw.org.au/index.php/member/profile and click

on “Edit Profile”

To create your anchor text, use your HTML code in the “Bio” section

HTML code: <a href="http://www.yourdomain.com">Your Keyword</a>

To see the public view of your anchor text, click on your username

Here’s the public view of your anchor text links

http://www.bigartmob.com/ - Page Rank 5

First you will want to create a new account

Create a new account Link: http://www.bigartmob.com/profile/create/

After you have registered, click on “Edit Profile”

To create your anchor text, use your HTML code in the “Interest” section

HTML code: <a href="http://www.yourdomain.com">Your Keyword</a>

To see the public view of your anchor text, click on your username

Here’s the public view of your anchor text links

http://communities.etech.ohio.gov/ - Page Rank 5

First you will want to register

Registration link: http://communities.etech.ohio.gov/account/register.php

Once you have registered, click on your “Profile” link

Next, click on “Edit profile” link

You are given a WYSIWYG editor to create your anchor text links in the “About Me” section. And

make sure it is “Public”

Once you saved your changes, you will be taken to the public view of your anchor text links

http://sa-chinese.org/ - Page Rank 4

First you will need to click on the tab that says “Member Forum”

Now, you will need to register a new account

Once you have registered, click on “Profile” link

Next, click on the link that says “Forum Profile Information”

To create your anchor text, use your BBC code in the “Signature” section. You can also

Put your URL in the section that says “Website URL” and place your keyword in the “Website

title” box. Your title will become your anchor text keyword

BBC Code: [url=http://www.yourdomain.com]Your Keyword[/url]

To see the public view of your anchor text, click on the links that says “summary”

Here’s the public view of your anchor text links

http://www.voxopop.com/ - Page Rank 6

First you will want to sign up

Sign up link: http://www.voxopop.com/signup

After you have signed up, click on your username

Next, click on “Edit your profile” link

Now put your Website URL on the “Website/blog address” section

To see the public view of your anchor text, click on the links that says “Return to personal page”

Here’s the public view of your anchor text links

http://www.cargurus.com/ - Page Rank 5

First you will want to register

Once you have registered, click on “My Settings” link

Next, click on “Edit” link

To create your anchor text, use your HTML code in the “About” section

HTML code: <a href="http://www.yourdomain.com">Your Keyword</a>

Once you saved your changes, you will be taken to the public view of your anchor text links

http://tasselfoot.com/ - Page Rank 4

First you will need to click on the tab that says “Forum”

Now, you will need to register a new account

Once you have registered, click on “Settings” link

Next, click on “Edit Signature” link

WYSIWYG editor to create your anchor text links in the “Signature” section

To see the public view of your anchor text links, just click on your username

Here’s the public view of your anchor text links

http://pkbc.ca/ - Page Rank 4

First you will need to click on the tab that says “Forum”

Now, you will need to register a new account

After you have registered, you will need to click “Profile” link

Next, click on “Signature” link

To create your anchor text, use your BBC code in the “Signature” section

BBC Code: [url=http://www.yourdomain.com]Your Keyword[/url]

To see the public view of your anchor text, click on your profile

Here’s the public view of your anchor text links

http://www.popscreen.com/ - Page Rank 5

First you will want to sign up

Sign up Link: http://www.popscreen.com/join

Once you have signed up, put your mouse over your username, you will see a drop down menu,

click on “Settings”

Then put your Website URL on the “Web Site or Blog” section

To see the public view of your anchor text, put your mouse over your username, you will see a

drop down menu, click on “Profile”

Here’s the public view of your anchor text links

http://www.garisocial.com/

First you will want to register

Registration link: http://www.garisocial.com/account/register.php

Once you have registered, click on your profile icon

Next, click on “Edit profile” link

You are given a WYSIWYG editor to create your anchor text links in the “About Me” section. And

make sure it is “Public”

Once you saved your changes, you will be taken to the public view of your anchor text links

http://www.mexicoforestal.gob.mx – Page Rank 5

First you will want to register

Registration link: http://www.mexicoforestal.gob.mx/index.php/member/register

After you have registered, you will need to go to

http://www.mexicoforestal.gob.mx/index.php/member/login

Next, you have to go to http://www.mexicoforestal.gob.mx/index.php/member/profile and

click on “Edit Profile”

To create your anchor text, use your HTML code in the “Bio” section

HTML code: <a href="http://www.yourdomain.com">Your Keyword</a>

To see the public view of your anchor text, click on your username

Here’s the public view of your anchor text links

http://www.ryarc.com/ - Page Rank 4

First you will need to click on the tab that says “Visit the forums”

Now, you will need to register a new account

After you have registered, you will need to click “Profile” link

Next, click on “Signature” link

To create your anchor text, use your BBC code in the “Signature” section

BBC Code: [url=http://www.yourdomain.com]Your Keyword[/url]

To see the public view of your anchor text, click on your profile link again

Here’s the public view of your anchor text links

http://www.ottolejeune.com/ - Page Rank 5

First you will want to register

Registration Link: http://www.ottolejeune.com/index.php/member/register

After you have registered, you will need to go to

http://www.ottolejeune.com/index.php/member/login

Next, you have to go to http://www.ottolejeune.com/index.php/member/profile and click on

“Edit Profile”

To create your anchor text, use your HTML code in the “Bio” section

HTML code: <a href="http://www.yourdomain.com">Your Keyword</a>

To see the public view of your anchor text, click on your username

Here’s the public view of your anchor text links

http://hapas.us/ - Page Rank 4

First you will want to register

Registration link: http://hapas.us/account/register.php

Once you have registered, click on your profile icon

Next, click on “Edit profile” link

You are given a WYSIWYG editor to create your anchor text links in the “About Me” section. And

make sure it is “Public”

Once you saved your changes, you will be taken to the public view of your anchor text links

http://forum.blu-ray.com/ - Page Rank 5

First you will want to register

Registration link: http://forum.blu-ray.com/register.php

Once you have registered, click on “Profile” link

Next, click on “Edit Signature” link

You are given a WYSIWYG editor to create your anchor text links in the “Signature” section

To see the public view of your anchor text links, just click on your username

Here’s the public view of your anchor text links

http://forum.liberaljudaism.org/ - Page Rank 4

First you will need to click that says “Login to the forum”

Now, you will need to register a new account

After you have registered, you will need to click “Profile” link

Next, click on the link that says “Forum Profile Information”

To create your anchor text, put your URL in the section that says “Website URL” and place your

keyword in the “Website title” box. Your title will become your anchor text keyword

To see the public view of your anchor text, click on the links that says “summary”

Here’s the public view of your anchor text links

http://www.ironguides.net/ - Page Rank 4

First you will need to click that says “Login to the forum”

Now, you will need to register a new account

After you have registered, you will need to click “Profile” link

Next, click on “Personality”

To create your anchor text, use your BBC code in the “Signature” section

BBC Code: [url=http://www.yourdomain.com]Your Keyword[/url]

To see the public view of your anchor text, click on “Profile” link again

Here’s the public view of your anchor text links

http://zooppa.com/ - Page Rank 5

First you will want to register

Registration link: http://zooppa.com/signup

Once you have registered, click on your username

Next, click on “Edit profile”

Then click on “Extra” tab

To create your anchor text, use your HTML code in the “About Me” section

HTML code: <a href="http://www.yourdomain.com">Your Keyword</a>

To see the public view of your anchor text, click on your username

Then click on “More” link

Here’s the public view of your anchor text links

http://www.ridebuzz.org/ - Page Rank 5

First you will want to register

Registration link: http://www.ridebuzz.org/user/register

After you have registered, click on “My Profile” link

Next, click on “Edit” tab

Then go to “prefs” tab

To create your anchor text, use your HTML code in the “A little bit about yourself” section

HTML code: <a href="http://www.yourdomain.com">Your Keyword</a>

To see the public view of your anchor text, click on “View” tab

Here’s the public view of your anchor text links

http://seanalan.com – Page Rank 4

First you will want to register

Registration link: http://seanalan.com/index.php?/member/register

After you have registered, you will need to go to

http://seanalan.com/index.php?/member/login

Next, you have to go to http://seanalan.com/index.php?/member/profile and click on “Edit

Profile”

To create your anchor text, use your HTML code in the “Bio” section

HTML code: <a href="http://www.yourdomain.com">Your Keyword</a>

To see the public view of your anchor text, click on your username

Here’s the public view of your anchor text links

http://www.healthcareersinalaska.info/ - Page Rank 4

First you will want to register

Registration link: http://www.healthcareersinalaska.info/index.php/member/register

After you have registered, you will need to go to

http://www.healthcareersinalaska.info/index.php/member/login

Next, you have to go to http://www.healthcareersinalaska.info/index.php/member/profile

and click on “Edit Profile”

To create your anchor text, use your HTML code in the “Bio” section

HTML code: <a href="http://www.yourdomain.com">Your Keyword</a>

To see the public view of your anchor text, click on your username

Here’s the public view of your anchor text links

http://www.prettymay.net/ - Page Rank 4

First you will need to click on the tab that says “Forum”

Now, you will need to register a new account

Once you have registered, click on “Profile” link

Next, click on the link that says “Forum Profile Information

To create your anchor text, use your BBC code in the “Signature” section. You can also

put your URL in the section that says “Website URL” and place your keyword in the “Website

title” box. Your title will become your anchor text keyword

BBC Code: [url=http://www.yourdomain.com]Your Keyword[/url]

To see the public view of your anchor text, click on the links that says “summary”

Here’s the public view of your anchor text links

http://www.jockeyjournal.com/ - Page Rank 4

First you will need to click on the tab that says “The Board”

Now, you will need to register a new account

After you have registered, you will need to click “Profile” link

Next, click on “Edit Signature” link

You are given a WYSIWYG editor to create your anchor text links in the “Signature” section

To see the public view of your anchor text, c lick on your username

Here’s the public view of your anchor text links

http://mahtweets.com/ - Page Rank 4

First you will need to click on the tab that says “Forums”

Now, you will need to register a new account

Once you have registered, click on “Profile” link

Next, click on “Signature” link

To create your anchor text, use your BBC code in the “Signature” section

BBC Code: [url=http://www.yourdomain.com]Your Keyword[/url]

To see the public view of your anchor text, click on your username

Here’s the public view of your anchor text links

http://redux.com/ - Page Rank 6

First you will want to join

Registration link: http://redux.com/signup/splash?ab=1

Once you have joined, click on your username, you will see a drop down menu, click on “view

profile” link

Next, go to “Websites” section and click on “edit” link

Then put your Website URL on the “Websites” section

Once you saved your changes, you will be taken to the public view of your anchor text links

http://www.earthinpictures.com/ - Page Rank 4

First you will need to click on the link that says “Earth in Pictures Community”

Now, you will need to register a new account

Once you have registered, click on your profile icon

Next, click on “Edit profile” link

To create your anchor text, use your HTML code in the “About me” section

HTML code: <a href="http://www.yourdomain.com">Your Keyword</a>

Once you saved your changes, you will be taken to the public view of your anchor text links

http://www.fooddudes.co.uk - Page Rank 5

First you will need to click on the tab that says “Forums”

Now, you will need to register a new account

Once you have registered, click on “Your Control Panel” link

Next, click on “Edit Profile” link

To create your anchor text, use your HTML code in the “Bio” section

HTML code: <a href="http://www.yourdomain.com">Your Keyword</a>

To see the public view of your anchor text, click on “Your Public Profile”

Here’s the public view of your anchor text links

http://www.shutterasia.com/ - Page Rank 4

First you will want to register

Registration link: http://www.shutterasia.com/forum/register.php

Once you have registered, click on “Quick Links” tab, you will see a drop down menu, click on

“Edit Signature” link

You are given a WYSIWYG editor to create your anchor text links in the “Signature” section

To see the public view of your anchor text links, just click on your username

Here’s the public view of your anchor text links

http://www.supereco.com/ - Page Rank 5

First you will want to join

Registration Link: http://www.supereco.com/join/

Once you have joined, click on “Edit Profile” link

To create your anchor text, use your HTML code in the “Bio” section

HTML code: <a href="http://www.yourdomain.com">Your Keyword</a>

To see the public view of your anchor text, click on your “Profile URL”

Here’s the public view of your anchor text links

http://www.fusefly.com/ - Page Rank 4

First you will want to register

Registration link: http://www.fusefly.com/pg/register/

Once you have registered, click on your profile icon

Next, click on “Edit profile” link

You are given a WYSIWYG editor to create your anchor text links in the “About Me” section. And

make sure it is “Public”

Once you saved your changes, you will be taken to the public view of your anchor text links

http://www.narniafans.com/ - Page Rank 5

First you will need to click on the tab that says “Forums”

Now, you will need to register a new account

Next, click on your username

You are given a WYSIWYG editor to create your anchor text links in the “Visitor Messages”

section

Once you saved your changes, you will be taken to the public view of your anchor text links

http://zendrum.com/ - Page Rank 4

First you will need to click on the tab that says “Discussion Forums”

Now you will need to register a new account.

Once you have registered, click on “My Profile” link

Next, click on the link that says “Forum Profile Information”

To create your anchor text, use your BBC code in the “Signature” section. You can also

put your URL in the section that says “Website URL” and place your keyword in the “Website

title” box. Your title will become your anchor text keyword

BBC Code: [url=http://www.yourdomain.com]Your Keyword[/url]

To see the public view of your anchor text, click on the links that says “summary”

Here’s the public view of your anchor text links

http://www.lovinghugs.com/- Page Rank 4

First you will need to click on the tab that says “Forum”

Now, you will need to register a new account

After you have registered, you will need to click “Profile” link

Next, click on “Personality”

To create your anchor text, use your BBC code in the “Signature” section

BBC Code: [url=http://www.yourdomain.com]Your Keyword[/url]

To see the public view of your anchor text, click on “Profile” link again

Here’s the public view of your anchor text links

http://www.bablingua.com/ - Page Rank 4

First you will need to click on the tab that says “Forum”

Now, you will need to register a new account

Once you have registered, click on “Control Panel” link

Next, click on “Edit Profile” link

To create your anchor text, use your HTML code in the “Bio” section

HTML code: <a href="http://www.yourdomain.com">Your Keyword</a>

To see the public view of your anchor text, click on “Profile” link

Here’s the public view of your anchor text links

http://www.equitycoalition.org – Page Rank 4

First you will want to register

Registration link http://www.equitycoalition.org/index.php?/member/register

After you have registered, you will need to go to

http://www.equitycoalition.org/index.php?/member/login

Next, you have to go to http://www.equitycoalition.org/index.php?/member/profile and click

on “Edit Profile”

To create your anchor text, use your HTML code in the “Bio” section

HTML code: <a href="http://www.yourdomain.com">Your Keyword</a>

To see the public view of your anchor text, click on your username

Here’s the public view of your anchor text links

As a bonus, I included an affiliate web site that is an alternative to clickbank. High Profit offers

high payout amounts on its products and has an amazing conversion rate.

http://www.highprofits.com/

First you will need to click on the tab that says “Forum”

Now you will need to register a new account

Once you have registered, click on the “Profile” link

Next, you will need to click on the “Edit Signature” link

You are given a WYSIWYG editor to create your anchor text links

To see the public view of your anchor text links, just click on your username

Here’s the public view of your anchor text links