Ohio Code Data Plates Past 8 Months Orders from Elevator Companies –Many are ordering Standards in...

Code Data PlatesAlterations

andOther Issues

by: John S. Rearick

CodeDataPlate.com

Ohio Code Data Plates Past 8 Months

• Orders from Elevator Companies– Many are ordering Standards in quantity

– A few only give State ID • Slows process as we must call in to establish edition

– Most do provide State ID and Edition Information

– Very few are providing any Alteration Information

– Several classes given to office staff and mechanics

• Orders from Building Owners & Managers– As of November 2005 we began to see Retail Orders

• Pay higher price and also must pay Ohio Sales Tax

– Most require research or verification to complete• State records

• Elevator contractor assistance

Ohio Standard Plates

• All Adopted Code Editions

codedataplate.com

INSTALLATION CODE: ASME/ANSI A17.1b-1989

CODE DATA PLATE

INSTALLATION CODE: ASME A17.1a-2005

CODE DATA PLATE

codedataplate.com

Standard 1 - Ohio Red Bookcodedataplate.com

INSTALLATION CODE: Bulletin 110

CODE DATA PLATE

STD CodeEdition StartDate EndDate Days20 ASME A17.1s-2005 February 12, 200619 ASME A17.1a-2005 October 29, 2005 February 11, 2006 10518 ASME A17.1-2004 March 1, 2005 October 28, 2005 24117 ASME A17.1b-2003 November 30, 2003 February 28, 2005 45616 ASME A17.1a-2002 October 4, 2002 November 29, 2003 42115 ASME A17.1-2000 April 1, 2002 October 3, 2002 18514 ASME A17.1b-1998 August 20, 1999 March 31, 2002 95413 ASME A17.1a-1997 April 1, 1999 August 19, 1999 14012 ASME A17.1b-1995 August 1, 1996 March 31, 1999 97211 ASME A17.1a-1994 July 1, 1995 July 31, 1996 39610 ASME A17.1-1993 May 15, 1995 June 30, 1995 469 ASME A17.1b-1992 June 30, 1993 May 14, 1995 6838 ASME A17.1a-1991 August 29, 1992 June 29, 1993 3047 ASME A17.1-1990 January 1, 1992 August 28, 1992 2406 ASME/ANSI A17.1b-1989 July 1, 1989 December 31, 1991 9135 ANSI/ASME A17.1b-1983 July 1, 1984 June 30, 1989 18254 ANSI A17.1b-1980 August 15, 1980 June 30, 1984 14153 ANSI A17.1a-1979 September 10, 1979 August 14, 1980 3392 ANSI A17.1b-1973 April 1, 1974 September 9, 1979 19871 Bulletin 110 March 31, 1974

Ohio

Would this plate be appropriate for all installations?

INSTALLATION CODE: ASME A17.1s-2005

CODE DATA PLATE

codedataplate.com

Note the “s”

Modernization• Alterations done under the A17.1-1996 Edition

– Always follows Rules in Standard 13 (a-1997)

#REF!PART XII RULES COMPLIED WITH:

codedataplate.com

1201.10b, 1201.11a, 1201.12, 1202.5c, 1202.12

ALTERATION CODE: ANSI A17.1a-1979


CODE DATA PLATE

#REF!

CODE DATA PLATEINSTALLATION CODE: ANSI A17.1b-1980

ALTERATION CODE: ASME A17.1a-2005

SECT. 8.7 REQUIREMENTS COMPLIED WITH:

8.7.2.8, 8.7.2.10.2, 8.7.2.11.1, 8.7.2.11.5, 8.7.2.14.1, 8.7.2.27.5, 8.7.2.28

codedataplate.com

• Alterations under A17.1-2000 and later Editions– Follows the 8.7 Requirements of the Alteration Edition

Reading the Plate

#REF!

codedataplate.com

ALTERATION CODE: ASME A17.1-2004


8.7.2.11.5, 8.7.2.13, 8.7.3.8, 8.7.3.12, 8.7.3.23.7, 8.7.3.24, 8.7.3.29, 8.7.3.30, 8.7.3.31.1, 8.7.3.31.2, 8.7.3.31.5, 8.7.3.31.8

CODE DATA PLATE


Door Operator

Wiring

Re-opening Devise

Door Restrictor

Plunger Gripper

Valve

Tank

Limits

Top of Car Insp..

Leveling

Controller Replacement

Emergency Operations

Pump Unit

Code Data Plate Order FormModernization Items - check those that apply and provide additional in blanks:

Alteration to Hoistway: Ascending Car/unintended Movement Protection

Hoistway Ventilation Change in Number of Ropes

Mach. Room Access: Addition of Rope Equalizers

Mach. Rm. Alteration: Addition of Auxiliary Rope-Fastening Devices

Replace or alter Wiring Alteration to cwt:

Horizontal Slide Entrance(s) added Installation of or Alteration to Cwt. Roller Guides

Vertical Bi-Parting Entrance(s) Alteration to Car or Cwt. Buffers or Bumpers

Tracks and/or Hangers Replaced Alteration of Guide Rails, Supports and Fastenings

Interlocks Replaced Alteration to Machine, Motor or Sheaves

HW Access and/or Unlocking Device Alteration Change in location of Driving Machine

Door restrictors added Alteration to Terminal-Stopping Devices

Door Operator added or altered Addition of or alteration to Top of Car Operating Device

Door Re-Opening devise added or altered Addition of or alteration to Car leveling or Truck-Zoning Device

Complete New Cab Change of Main Power Supply

Remodel Existing Cab: Controller change

Alteration of Car Frame or Platform Change in Type of Motion Control (AC, DC, VV, SCR, etc.)

Installation of or Alteration to Car Roller Guides Change in Type of Operation Control (Car Sw., Automatic, etc.)

Increase/Decease Deadweight of Car more than 5% Charge to Emergency Operations or Signaling devices

Change in Type of Service Installation of new Hydraulic Jack

Change in Class of Loading Install or alter Plunger

Change to carry Passengers on Freight elevator Install, alter or sleeve Cylinder

Increase in Rated Load Increase Working Pressure

Increase or Decrease Travel Change location of Hydro Jack

Increase in Rated Speed Relocation of Hydraulic Machine to below top of Cylinder

Decrease in Rated Speed Installation of Plunger Gripper

Replace or install New Car Safety Change to Valves, Pressure Piping & Fittings

Replace or install New Cwt. Safety Install or alter Tank

Alter Existing Car or Cwt. Safety Alter Anti-Creep Leveling device

Alter or install New Speed Governor Install or alter Emergency Lowering

Other items modernized, comments or any additional Information:____________________________________________________________________________________________________________________

Section 8.7 2000 Code Rules JOB:HYDRO TRACTION HYDRO TRACTION8.7.3.1 8.7.2.1.__ Alteration to Hoistway: '.1=wall change, 2=add elev,.3=const @top, .4 =const @bottom8.7.2.20 8.7.2.20 Ascending Car/unintended Movement Protection

8.7.3.1 8.7.2.1.5 Hoistway Ventilation 8.7.3.25.1 8.7.2.21.1 Change in Number of Ropes

8.7.3.7 8.7.2.7.__ Mach. Room Access: .1=Enclosures, .2=Means of Access, .3=Doors or Openings 8.7.3.25.2 8.7.2.21.2 Addition of Rope Equalizers

8.7.3.7 8.7.2.7.__ Mach. Rm. Alteration: '.4=Headroom, .5=Widows & Skylights, .6=Lighting, .7=Ventilation8.7.2.21.3 8.7.2.21.3 Addition of Auxiliary Rope-Fastening Devices

8.7.3.8 8.7.2.8 Replace or alter Wiring 8.7.3.26 8.7.2.22.__Alteration to cwt:.1=cwt except guides, .2=rod type

8.7.3.9 8.7.2.9 Alteration effecting structural support 8.7.3.26 8.7.2.22.3 Counterweight Roller Guide Modification/not replacement

8.7.3.10 8.7.2.10 Entrance(s) added 8.7.3.27 8.7.2.23 Alteration to Car or Cwt. Buffers or Bumpers

8.7.3.10 8.7.2.10.1 Tracks and/or Hangers Replaced 8.7.3.28 8.7.2.24 Alteration of Guide Rails, Supports and Fastenings

8.7.3.11 8.7.2.11.1 Interlocks Replaced 8.7.3.23 8.7.2.25.1__Alteration to Mach., Motor or Sheaves:a=Mach., b=Motor, c=susp.

8.7.3.11 8.7.2.11.4 HW Access and/or Unlocking Device Alteration 8.7.3.23.5 8.7.2.25.2 Change in location of Driving Machine

8.7.3.11 8.7.2.11.5 Door Restrictors added 8.7.3.30 8.7.2.26 Alteration to Terminal-Stopping Devices

8.7.3.12 8.7.2.12 Door Operator added or altered 8.7.3.31.1 8.7.2.27.1 Addition of or alteration to Top of Car Operating Device

8.7.2.13 8.7.2.13 Door Re-Opening devise added or altered 8.7.3.31.2 8.7.2.27.2 Addition of or alteration to Car leveling or Truck-Zoning Device

8.7.3.13 8.7.2.14.1 Complete New Cab 8.7.3.31.4 8.7.2.27.3 Change of Main Power Supply

8.7.3.13 8.7.2.14.__Remodel Existing Cab:.2=light,fan, exit, glass, .3=new panels, .5 removal of stop sw. 8.7.3.31.5 8.7.2.27.4 Controller change

8.7.3.14 8.7.2.15.1 Alteration of Car Frame or Platform 8.7.3.31.6 8.7.2.27.5 Change in Type of Motion Control (AC, DC, VV, SCR, etc.)

8.7.3.14 8.7.2.15.1 Car Roller Guide Modification/not replacement 8.7.3.31.7 8.7.2.27.6 Change in Type of Operation Control (Car Sw., Automatic, etc.)

8.7.3.21 8.7.2.15.2 Increase/Decease Deadweight of Car more than 5% 8.7.3.31.8 8.7.2.28 Charge to Emergency Operations or Signaling devices

8.7.3.17 8.7.2.16.1 Change in Type of Service 8.7.3.23.1 Installation of new Hydraulic Jack

8.7.3.18 8.7.2.16.2 Change in Class of Loading 8.7.3.23.2 Install or alter Plunger

8.7.3.19 8.7.2.16.3 Change to carry Passengers on Freight elevator 8.7.3.23.3 Install, alter or sleeve Cylinder

8.7.3.20 8.7.2.16.4 Increase in Rated Load 8.7.3.23.4 Increase Working Pressure

8.7.3.22.1 8.7.2.17.1 Increase or Decrease Travel 8.7.3.23.5 Change location of Hydro Jack

8.7.3.22.2 8.7.2.17.2 Increase in Rated Speed 8.7.3.23.6 Relocation of Hydraulic Machine

8.7.3.22.3 8.7.2.17.3 Decrease in Rated Speed 8.7.3.23.7 Installation of Plunger Gripper

8.7.3.15.1 8.7.2.18.1 Replace or install New Car Safety 8.7.3.24 Change to Valves, Pressure Piping & Fittings

8.7.3.15.2 8.7.2.18.2 Replace or install New Cwt. Safety 8.7.3.29 Install or alter Tank

8.7.3.15.3 8.7.2.18.3 Alter Existing Car or Cwt. Safety 8.7.3.31.3 Alter Anti-Creep Leveling device

8.7.3.16 8.7.2.19 Alter or install New Speed Governor 8.7.3.31.9 Install or alter Emergency Lowering

Internal Worksheets for Custom Plates

Custom Plates

• Modernizations– Multi-mod Plate

#REF!

#REF!

codedataplate.com


ANSI A17.1b-1980

ASME A17.1b-2003

ALTERATION CODE:

PART XII RULES COMPLIED WITH:

1200.5d, 1202.12a, 1202.12b, 1202.12e, 1202.13

CODE DATA PLATE

ALTERATION CODE:

8.7.2.11.5, 8.7.2.14.2, 8.7.2.14.3


Custom Plates

• Add-on Plates

#REF!

codedataplate.com

8.7.2.12, 8.7.2.13, 8.7.2.14.3, 8.7.2.20, 8.7.2.27.5, 8.7.2.28.


CODE DATA PLATEALTERATION CODE: ASME A17.1b-2003

codedataplate.com


CODE DATA PLATE

Alteration Not Listed

• 8.7.4 - Other Types of Driving Machines

• 8.7.5 - Special Application Elevators

• 8.7.7 - Dumbwaiters and Material Lifts

#REF!

CODE DATA PLATEINSTALLATION CODE: ANSI A17.1c-1974

ALTERATION CODE: ASME A17.1-2000


8.7.2.26, 8.7.5.7: 5.7.18, 5.7.20, 5.7.21

codedataplate.comSpecial Purpose Personnel Elevators

Limits

Driving Machine Operation Emergency Signal and/or Communication

• No Equivalent Part XII Rule– 8.7.2.11.5 - Door Restrictors– 8.7.20 - Rope Gripper– 8.7.3.23.7 - Plunger Gripper– 8.7.3.31.9 - Emergency Lowering



codedataplate.com

1201.11

ALTERATION CODE: ASME A17.1b-1998

INSTALLATION CODE: ANSI A17.1b-1973

CODE DATA PLATE

1201.11 (or 1203.1k) requires compliance with Rule 111.5

• No Equivalent Part XII Rule - use 1200.2 &– 8.7.20 - Rope Gripper– 8.7.3.23.7 - Plunger Gripper– 8.7.3.31.9 - Emergency Lowering



codedataplate.com

1200.2 (8.7.3.23.7)

ALTERATION CODE: ASME A17.1b-1998


CODE DATA PLATE

Other Alteration Plates• Car Weight ( On Crosshead)

ALTERATION DATA

ADDED CAR WEIGHT: 206 POUNDS

COMPLETE CAR WEIGHT: POUNDS

INSTALLED:2500

6906

9/12/03RATED LOAD:

• Car Speed (On Governor)? ?

TRIPPING SPEED: F.P.M.ROPE SIZE: IN. MATERIAL:CONSTRUCTION:PULL-THROUGH: POUNDSMANUFACTURED BY:

? ?

400

1/2

DO NOT LUBRICATE GOVERNOR ROPEHAUGHTON

SPEED-GOVERNOR MARKING PLATE

8 X 25IRON

395

Other Plates• Missing Cross Head Plate

• Temperature Humidity Plate (2.7.5.2)

● ●

125 F.P.M.

MANUFACTURED: BY:

● codedataplate.com ●

DOWN SPEED:

1982

CROSSHEAD DATA PLATE

COMPLETE CAR WEIGHT: POUNDS3250

ESCO

RATED LOAD: 2000

Temperature Min. Max.

Relative Humidity 80%

13oC (55oF) 32oC (90oF)

codedataplate.com

Ambient Air Requirements

Max.

Other Issues

• Non-Conforming– Missing Plates– No Alterations Recorded– Magic Marker Plates– Paper Plates– Blank Plates

• Mounting Locations– Main Line or Controller only– Groups on Single Plate

• Must Identify all Units by State ID

Thank You

Questions

Suggestions

Pocket Code

Date post:	26-Mar-2015
Category:	Documents
Upload:	nathan-ayers
View:	213 times
Download:	0 times

Ohio Code Data Plates Past 8 Months Orders from Elevator Companies –Many are ordering Standards in...

Documents