Olive Oil Sampling Machine• Determine oil quality and quantity.• Oil samples from 800g of olives in

30 mins• Stainless steel construction

• Australian made • Transportable for in grove use• Easy to use & clean

Hammer Mill Dual Heated Water Bath Malaxer Centrifuge

Hammer Mill

• Load the olives into the hammer mill hopper and mill for a nominal 2 mins.

• The pomace is received by a transferable canister.

Dual Heated Water Bath Malaxer

• Canister is transferred to a heated water bath.

• The malaxer is inserted and the pomace is malaxed for a nominal 20mins.

Centrifuge

• Canister is transferred to the centrifuge and spun for a nominal 2 mins.

Extraction

• Canister is transferred to a stand and oil is drawn from the outlet closure.

Brook Engineering Olive Oil Sampling Unit Specifications

Control Cabinet• Power Requirements 240v Single Phase, 10A• Dimensions (WxDxH) mm 350 x 400 x 700

Hammer Mill• Sample Capacity 800g / Canister• Motor 1.5 kW • Speed Adjustment 1000 - 2000 rpm• Milling Time 2 Mins Nominal• Dimensions (WxDxH) mm 310 x 310 x 700

Malaxer• Canister Capacity 2• Stirrer Motors 60 W each• Heater Capacity 3 kW• Water Bath Temp Adjustable to 50-deg c• Malaxing Time 20 Mins Nominal• Dimensions (WxDxH) mm 510 x 700 x 700

Centrifuge • Motor 1.5 kW • Speed Adjustment 2000 – 3500 rpm• Centrifuge time 2 Mins Nominal• Dimensions (WxDxH) mm 400 x 700 x 700

All components feature drip trays and vibration isolators and are rated to moisture and dust ingression to IP67.