+ All Categories
Home > Documents > OLV 40 P3K-IBS - Digitron · 2013-12-31 · OLV 40 P3K-IBS Amplifiers for Glass Fibre-optic Cable...

OLV 40 P3K-IBS - Digitron · 2013-12-31 · OLV 40 P3K-IBS Amplifiers for Glass Fibre-optic Cable...

Date post: 28-Feb-2020
Category:
Upload: others
View: 1 times
Download: 0 times
Share this document with a friend
1
201446 © di-soric | Subject to modifications | 30/12/13 | Page 1 (1) OLV 40 P3K-IBS Amplifiers for Glass Fibre-optic Cable di-soric GmbH & Co. KG Steinbeisstraße 6 DE-73660 Urbach Fon + 49 (0) 71 81 / 98 79 - 0 Fax + 49 (0) 71 81 / 98 79 - 179 [email protected] www.di-soric.com TECHNICAL INFORMATION (typ.) +20°C, 24V DC Amplifier for Glass fibre-optic cables M18 Evaluation digital Emitted light Infrared, 880 nm, clocked Service voltage 12 ... 35 V DC Internal power consumption < 55 mA Sensitivity adjustment potentiometer Switching output pnp, 200 mA, NO/NC, programmable Switching hysteresis < 10 % Operating frequency 1.500 Hz Response-/release time < 0,33 ms / < 0,33 ms Ambient temperature -10 … +60 °C Temperature drift 0,3 %/K Ambient light immunity 50 kLx Insulation voltage endurance 500 V Protection class IP 65 Casing material die-cast zinc lacquered finish Connection Connector, M12, 3-poled BN = brown BK = black BU = blue BN BK BU 1 4 3 S pnp Safety instructions The Instruments are not to be used for safety applications, in particular applications in which safety of persons depends on proper operation of the instruments. These instruments shall exclusively be used by qualified personnel. Repair only by di-soric. Metal casing Infrared light, clocked Sensitivity adjustable High operating frequency Light/dark switching Timer module
Transcript
Page 1: OLV 40 P3K-IBS - Digitron · 2013-12-31 · OLV 40 P3K-IBS Amplifiers for Glass Fibre-optic Cable di-soric GmbH & Co. KG Steinbeisstraße 6 DE-73660 Urbach Fon + 49 (0) 71 81 / 98

201446

© di-soric | Subject to modifications | 30/12/13 | Page 1 (1)

OLV 40 P3K-IBS

Amplifiers for Glass Fibre-optic Cable

di-soric GmbH & Co. KG Steinbeisstraße 6 DE-73660 Urbach

Fon + 49 (0) 71 81 / 98 79 - 0 Fax + 49 (0) 71 81 / 98 79 - 179 [email protected] www.di-soric.com

TECHNICAL INFORMATION (typ.) +20°C, 24V DC

Amplifier for   Glass fibre-optic cables M18

Evaluation   digital

Emitted light   Infrared, 880 nm, clocked

Service voltage   12 ... 35 V DC

Internal power consumption   < 55 mA

Sensitivity adjustment   potentiometer

Switching output   pnp, 200 mA, NO/NC, programmable

Switching hysteresis   < 10 %

Operating frequency   1.500 Hz

Response-/release time   < 0,33 ms / < 0,33 ms

Ambient temperature   -10 … +60 °C

Temperature drift   0,3 %/K

Ambient light immunity   50 kLx

Insulation voltage endurance   500 V

Protection class   IP 65

Casing material   die-cast zinc lacquered finish

Connection   Connector, M12, 3-poled

BN = brown

BK = black

BU = blue

BN

BK

BU

1

4

3

Spnp

Safety instructionsThe Instruments are not to be used for safety applications, in particularapplications in which safety of persons depends on proper operation of theinstruments.These instruments shall exclusively be used by qualified personnel.Repair only by di-soric.

Metal casing

Infrared light, clocked

Sensitivity adjustable

High operating frequency

Light/dark switching

Timer module

Recommended