Olympus Stylus Tough 8010 6020 3000 Series

8/3/2019 Olympus Stylus Tough 8010 6020 3000 Series

1/83

Instruction Manual

STYLUS TOUGH-8010 / TOUGH-8010 STYLUS TOUGH-6020 / TOUGH-6020 STYLUS TOUGH-3000 / TOUGH-3000

DIGITAL CAMERA

Thank you for purchasing an Olympus digital camera. Before you start touse your new camera, please read these instructions carefully to enjoyoptimum performance and a longer service life. Keep this manual in asafe place for future reference.

The application software and instruction manual PDF le are stored onthe internal memory of the camera.

We recommend that you take test shots to get accustomed to your camera before taking important photographs.

In the interest of continually improving products, Olympus reserves theright to update or modify information contained in this manual.

The screen and camera illustrations shown in this manual were producedduring the development stages and may differ from the actual product.Unless otherwise speci ed, the explanation about these illustrations isprovided for STYLUS TOUGH-8010/ TOUGH-8010.


2/83

2 EN

ContentsContents

Step 5 PrintingDirect printing (PictBridge) (p. 53)Print Reservations (DPOF) (p. 56)

Step 4 How to Use the CameraCamera Settings (p. 3)

Step 3 Shooting and Playing Back ImagesShooting, Playback, and Erasing (p. 16)

Step 2 Preparing the CameraPreparing the Camera (p. 11)

Names of Parts .............................. 7

Preparing the Camera ................. 11

Shooting, Playback, and Erasing ......................................... 16

Using Shooting Modes ................ 23

Using Shooting Functions .......... 28

Menus for Shooting Functions ... 33

Menus for Playback, Editing, and Printing Functions ....................... 38

Menus for Other CameraSettings ........................................ 44

Printing ......................................... 53

Usage Tips ................................... 58

Appendix ...................................... 63

Step 1 Checking the contents of the box

Other accessories not shown: Warranty cardContents may vary depending on purchase location.

Digital camera

USB cable(CB-USB6)

AV cable(CB-AVC3)

Strap

USB-AC adapter (F-2AC)

or

Lithium Ion Battery*1 STYLUS TOUGH-8010/ TOUGH-8010 and

STYLUS TOUGH-6020/ TOUGH-6020*2 STYLUS TOUGH-3000/ TOUGH-3000

or

LI-50B *1 LI-42B *2


3/83

3 EN

Camera Settings

Using the Direct ButtonsUsing the Direct Buttons Frequently used functions can be accessed using the direct buttons.

Operation guide

The symbols FGHI displayed for image selectionsand settings indicate that the arrow pad is to be used.

NORM

OK

SINGLE PRINTPRINT

4/304/30

MORE

10/02/26 12:3010/02/26 12:30

NORM 14MFILE 100 0004100 000402 26 12 30:..2010

MENU OKSETCANCEL

X

Y M D TIME

Y/M/D Y/M/D

Arrow pad

H (left)

G (down) /D button (erase) (p. 20)

F (up) /INFO button (changinginformation display) (p. 18, 21)

I (right)

A button

Operation guides displayed at the bottom of the screenindicate that the m button, A button, or zoombuttons can be used.

MENUOK

SEL. IMAGE

ERASE/CANCEL

Operation guide

OKSET

SHADOW ADJUST AUTOAF MODE FACE/iESPESP/ ESPFINE ZOOM OFFDIGITAL ZOOM OFF

COMPRESSION NORMAL

MENU OKSETEXIT

1

2

3

1

2

IMAGE SIZEIMAGE SIZE 14M14M

Shutter button (p. 16, 58)

Zoom buttons (p. 17, 20)

Movie record button (p. 17)

q button (switchingbetween shooting andplayback) (p. 17, 18, 45)

m button (p. 4)

E button (camera guide/menu guide) (p. 22)


4/83


5/83

5 EN

Menu Index

Menus for Shooting Functions

1 Shooting modeP (PROGRAM AUTO) .......p. 16M (iAUTO) ....................p. 23

s (SCENE MODE) ......p. 23P (MAGIC FILTER) .....p. 24p (PANORAMA) ...............p. 25Q (BEAUTY) ................p. 27

2 Flash ..................................p. 283 Macro ................................p. 284 Self-timer ...........................p. 305 Exposure compensation ....p. 306 White balance ....................p. 307 ISO ....................................p. 31

8 Drive ..................................p. 329 o (SETUP)

IMAGE SIZE (Still images)

.......................................p. 33IMAGE SIZE (Movies) .......p. 33COMPRESSION (Still images)

.......................................p. 33IMAGE QUALITY (Movies)

.......................................p. 33SHADOW ADJUST ...........p. 34AF MODE ..........................p. 34ESP/ n ............................p. 34FINE ZOOM ......................p. 35

1 SLIDESHOW .....................p. 382 PHOTO SURFING.............p. 383 EVENT q ........................p. 394 COLLECTION q .............p. 395 BEAUTY FIX......................p. 40

Menus for Playback, Editing, and Printing Functions

6 EDIT ..................................p. 407 ERASE ..............................p. 428 o (SETUP)

PRINT ORDER ..................p. 420 (Protect) .....................p. 42

14M44

PP

0.00.0AUTOWB

AUTOWB

AUTOISO

AUTOISO

PROGRAM AUTOPROGRAM AUTO

PHOTO SURFING

EVENTCOLLECTION

BEAUTY FIXEDITERASE

SETUP

SLIDESHOWSLIDESHOW

67

3

21

54

DIGITAL ZOOM .................p. 35R (Still images) ..................p. 35R (Movies) .........................p. 36

IMAGE STABILIZER(Still images)/IS MOVIE MODE(Movies) .............................p. 36REC VIEW .........................p. 36PIC ORIENTATION *1 .........p. 37ICON GUIDE .....................p. 37REMOTE FLASH *2 ............p. 37

8

9

8

321

4

MENU OKSETEXIT

PRINT ORDER

y0

R1

2

3

1

2

SHADOW ADJUST AUTOAF MODE FACE/iESPESP/ ESPFINE ZOOM OFFDIGITAL ZOOM OFF

COMPRESSION NORMAL

MENU OKSETEXIT

1

2

3

1

2

IMAGE SIZEIMAGE SIZE 14M14M

REC VIEW ON

PIC ORIENTATION ON

IMAGE STABILIZER ON

ICON GUIDE ON

REMOTE FLASH ON

R OFF

MENU OKSETEXIT

1

2

3

1

2

IMAGE SIZE VGA

IS MOVIE MODE OFF

ON

IMAGE QUALITY NORMAL

MENU OKSETEXIT

R1

2

3

1

2

65

7

y (Rotate).........................p. 43R (Add sound to still images)

.......................................p. 43

*1 STYLUS TOUGH-8010/ TOUGH-8010 and STYLUS TOUGH-6020/ TOUGH-6020 only*2 STYLUS TOUGH-8010/ TOUGH-8010 only


6/83

6 EN

1 r (Settings 1)INTERNAL/SD ...................p. 44MEMORY FORMAT/FORMAT ............................p. 44DATA REPAIR ................... p. 44u COPY .....................p. 44l (Language) ................p. 44RESET...............................p. 45USB CONNECTION ..........p. 45

2 s (Settings 2)q POWER ON ................p. 45SAVE SETTINGS ..............p. 45PW ON SETUP .................p. 45

Menus for Other Camera Settings

SOUND SETTINGS ..........p. 46FILE NAME .......................p. 46PIXEL MAPPING ...............p. 47s (Monitor) .....................p. 47

3 t (Settings 3)X (Date/time) ..................p. 47WORLD TIME....................p. 48TV OUT .............................p. 48POWER SAVE...................p. 50MANOMETER *1 ................. p.50TAP CONTROL *2 ............... p.51LED ILLUMINATOR *2......... p.52

COPYENGLISH

RESET

USB CONNECTION PC

MENU OK

MEMORY FORMAT

SETEXIT

INTERNAL/SD

DATA REPAIR

AUTO1

2

1

2

3321

*1 STYLUS TOUGH-8010/ TOUGH-8010 only*2 STYLUS TOUGH-8010/ TOUGH-8010 and STYLUS TOUGH-6020/ TOUGH-6020 only

Operating the camera by tapping theOperating the camera by tapping the bodybody (p. 51)(p. 51) (STYLUS TOUGH-8010/ TOUGH-8010 and STYLUS TOUGH-6020/ TOUGH-6020 only)

You can operate the camera by tapping the body when[TAP CONTROL] is [ON].


7/83

7 EN

Names of Parts

1 Battery/card/connector cover lock.................................................... p. 11

2 LOCK knob *1................................. p. 113 HDMI mini connector .................... p. 494 Multi-connector ........... p. 12, 13, 49, 535 Battery/card/connector cover

........................................ p. 11, 49, 71

Camera unit

11

11

1

2

3

4

5

6

10

7

8

9

STYLUS TOUGH-6020/

TOUGH-6020

STYLUS TOUGH-3000/

TOUGH-3000

6 Lens .............................................p. 637 Self-timer lamp/

LED illuminator *2 ...........p. 30/ p. 32, 528 Flash ............................................p. 289 Battery lock knob .......................... p. 1110 Tripod socket

11 Microphone*3

..........................p. 35, 43*1 STYLUS TOUGH-8010/ TOUGH-8010 only*2 STYLUS TOUGH-8010/ TOUGH-8010 and STYLUS TOUGH-6020/ TOUGH-6020 only*3 STYLUS TOUGH-3000/ TOUGH-3000


8/83

8 EN

1

6

10

11

8

2

3

4

5

7

9

12

13

14

2

STYLUS TOUGH-6020/ TOUGH-6020

1 n button ........................ p. 14, 162 Microphone *1 ..........................p. 35, 433 Monitor .........................p. 9, 16, 47, 584 Speaker 5 q button (switching between shooting

and playback) ................... p. 17, 18, 456 A button (OK) ...............................p. 37 Indicator lamp ......................... p. 12, 138 Shutter button ......................... p. 16, 589 Zoom buttons .........................p. 17, 20

10 Movie record button .....................p. 1711 Strap eyelet .................................... p. 812 Arrow pad .......................................p. 3

INFO button (changing informationdisplay) .............................p. 18, 21D button (erase) ....................p. 20

13 E button(camera guide/menu guide) ......... p. 22

14 m button ..............................p. 3, 4

Attaching the camera strap

Pull the strap tight so that it does not come loose.

*1 STYLUS TOUGH-8010/ TOUGH-8010 and STYLUS TOUGH-6020/ TOUGH-6020


9/83

9 EN

Monitor

Shooting mode display

F3.91/1001/100 F3.9

PP

14 M44 NORM

PP

0.00.0

AUTOWB

AUTOWB

AUTOISO

AUTOISO

00:3400:34

1 32

45 6 7 8 910 11

15 16 17 18 14 13 12

19

27 28

20

22 21

2423

25

26

960hPa

0m

1 Battery check .........................p. 13, 592 Tap control *1..............................p. 6, 513 Shooting mode .......................p. 16, 234 Flash ............................................p. 28

Flash standby/ ash charge .......... p. 585 Macro/super macro/

S-macro LED mode *1....................p. 286 Self-timer ......................................p. 307 Exposure compensation ............... p. 308 White balance ..............................p. 309 ISO ............................................... p. 3110 Drive .............................................p. 3211 [SETUP] menu .......................p. 4, 5, 612 World time ....................................p. 4813 Image stabilization (still images)/

Digital image stabilization (movies)....................................................p. 36

14 Metering .......................................p. 3415 Shadow Adjustment Technology

....................................................p. 34

16 Compression (still images)..................................p. 33, 66, 67, 68

17 Image size (still images)..................................p. 33, 66, 67, 68

18 Number of storable still pictures(still images) .................................p. 16

19 Current memory ...........................p. 6520 Remaining recording time

(movies) .......................................p. 1721 Altitude/water depth *2 ...................p. 5022 Atmospheric/

hydraulic pressure *2 ......................p. 5023 Image size (movies) ... p. 33, 66, 67, 6824 Histogram ..................................... p. 1825 AF target mark .............................p. 1626 Camera shake warning27 Aperture value .............................. p. 1628 Shutter speed ............................... p. 16



10/83

10 EN

Playback mode displayStandard display

1010

10/02/26 12:3010/02/26 12:30

4/304/30

00:12/00:3400:12/ 00:3400:12/00:34

1 6 5 432

17

1

6

Still image Movie

Advanced display

1010 4/304/30

1/1000 F 3.9 2.0

AUTOWB

AUTOISOP

NORM 14 M

FILE 100 0004

10/02/26 12:30

1/1000 F3.9 2.0

AUTOWB

AUTOISOP

FILE 100 0004

10/02/26 12:30

NORM 14 M

1 6 8 9 1110 5 432

7

12

14

16

17

18 1920 13

15

22 21

24

23960hPa

0m

1 Battery check .........................p. 13, 592 Print reservation/

number of prints .................. p. 56/p. 553 Protect ..........................................p. 424 Adding sound ...................p. 35, 36, 435 Current memory ...........................p. 656 Frame number/total number of images

(still images) ................................. p. 18Elapsed time/total recording time(movies) .......................................p. 19

7 Histogram ..................................... p. 188 Shutter speed ............................... p. 169 Aperture value .............................. p. 1610 ISO ...............................................p. 3111 Exposure compensation ............... p. 3012 White balance ..............................p. 30

13 Compression (still images)..................................p. 33, 66, 67, 68

Image quality (movies)..................................p. 33, 66, 67, 68

14 Image size .................. p. 33, 66, 67, 6815 Drive .............................................p. 3216 File number 17 Date and time ......................... p. 14, 4718 Metering .......................................p. 3419 Shadow Adjustment Technology

................................................... p. 3420 Flash ............................................p. 2821 Shooting mode ....................... p. 16, 2322 Macro ...........................................p. 2823 Altitude/water depth *.....................p. 5024 Atmospheric/

hydraulic pressure * ....................... p. 50

* STYLUS TOUGH-8010/ TOUGH-8010 only


11/83

11EN

Preparing the Camera

3 STYLUS TOUGH-8010/ TOUGH-8010

STYLUS TOUGH-6020/ TOUGH-6020STYLUS TOUGH-3000/ TOUGH-3000

1

2 3

1

2

Insert the battery by putting in the markedside rst, with the B marks toward thebattery lock knob.Damage to the battery exterior (scratches,etc.) may produce heat or an explosion.

Insert the battery while sliding the batterylock knob in the direction of the arrow.

Slide the battery lock knob in the directionof the arrow to unlock, and then remove thebattery.

When removing the battery or card, be sureto turn off the camera before opening or closing the battery/card/connector cover.

When using the camera, be sure to closethe battery/card/connector cover.

Battery charge and camera setup

Connect the camera to the computer to chargethe battery and setup the camera.

System requirementsWindows XP (SP2 or later)/Windows Vista/Windows 7

When using another system other than theabove or no computer, see Charging thebattery with the included USB-AC adapter(p. 13).

Inserting the battery

1STYLUS TOUGH-8010/ TOUGH-8010


3

2 1

Battery/card/connector cover lock

Battery/card/connector cover

LOCK knob 2

1

Battery/card/connector cover lock

Battery/card/connector cover


Battery lock knob


Battery lock knob




12/83

12 EN

Do not insert SD/SDHC memory cardsbefore the camera setup.

Do not format the internal memory until thecamera setup is complete. Doing so willerase the camera instruction manual andthe PC software (ib) data that are stored onthe internal memory.

Check that your computer meets thefollowing system requirements:Windows XP (SP2 or later)/Windows Vista/Windows 7

Refer to the PC software (ib) help guide for details on how to use the PC software (ib).

2 Select and execute OLYMPUSCamera Initialization, which is

displayed on the computer screenwhen the camera is recognized bythe computer.

If nothing is displayed on the camera screeneven after connecting the camera to thecomputer, the battery may be exhausted.Leave the camera connected to thecomputer until the battery has charged, thendisconnect and reconnect the camera.

Even if a computer has USB ports, proper operation is not guaranteed in the following

cases:Computers with USB ports installed using anexpansion card, etc.

Computers without a factory-installed OS andhome-built computers

Double-click the icon for the camera drive(Removable Disk), and then executeSetup. exe to start the camera setup.

3 Follow the instructions on thecomputer screen and setup thecamera.

1 Connect the camera to thecomputer.

When connecting the camera to thecomputer via USB cable, face the lensdownward.

Multi-connector

USB cable

(supplied)

Computer (onand running)

Indicator lamp

Charging the battery

When the camera is connected to thecomputer, the battery in the camera will becharged.

When charging, the indicator lamp light. Whencharging is complete, the indicator lamp will turnoff.

If the indicator lamp does not light, thecamera may be incorrectly connected, or the battery, camera, computer or USB cablemay not be functioning correctly.

Camera setupSet the camera date and time, time zoneand display language automatically; installthe camera instruction manual and PCsoftware (ib).


13/83

13 EN

Charging the battery with the included USB-AC adapter

The included USB-AC adapter (F-2AC)(hereafter referred as AC adapter) hasbeen designed to be used for charging

and playback. Make sure that shootingis not being used while the AC adapter isconnected to the camera.

Example: AC adapter with an AC cable

1

1

2

3

Multi-connector

AC outlet

USB cable (supplied)

When connecting the camera to thecomputer via USB cable, face the lensdownward.


Indicator lampOn: ChargingOff: Charged


Indicator lampOn: ChargingOff: Charged


Indicator lampOn: Charging

Off: Charged

The battery is not fully charged atshipment. Before use, be sure to chargethe battery until the indicator lamp turns off (STYLUS TOUGH-8010/ TOUGH-8010,STYLUS TOUGH-6020/ TOUGH-6020:up to 3 hours, STYLUS TOUGH-3000/

TOUGH-3000: up to 2.5 hours).

If the indicator lamp does not light, the ACadapter is not connected to the cameracorrectly, or the battery, camera, or ACadapter may be broken.

For details on the battery and the ACadapter, see Battery, USB-AC adapter (included), Charger (sold separately)(p. 63).

Battery can be charged by connectingthe camera to the computer. However,when charging with the system other thanWindows XP (SP2 or later)/Windows Vista/

Windows 7, charging takes much time.

When to charge the batteriesCharge the battery when the error messageshown below appears.

Monitor top left Error message

Flashes in red

44

BATTERY EMPTY

14M


14/83

14 EN

When not using a computer See the next section under Setting the date,time and time zone.

When using a computer with systemother than Windows XP (SP2 or later)/Windows Vista/Windows 7Connect the camera to the computer andcopy the instruction manual PDF le for your language in the Manual folder in theinternal memory of the camera.

Setting the date, time and time zone

The date and time set here are saved to image le names, date prints, and other data.

1 Press the n button to turn onthe camera.

The date and time setting screen is displayedwhen the date and time are not set.

Date and time setting screen

X

Y/M/D

Y M D TIME

-- -- -- --:..

MENUCANCEL

--------

2 Use FG to select the year for [Y].

-- -- -- --:.

MENUCANCEL

X

. Y/M/D

Y M D TIME

20102010

3 Press I to save the setting for [Y].

-- -- --:..2010

X

Y/M/D

Y M D TIME

MENUCANCEL

0000

4 As in Steps 2 and 3, use FGHI and the A button to set [M](month), [D] (day), [TIME] (hoursand minutes), and [Y/M/D] (date

order).For precise time setting, press the A buttonas the time signal strikes 00 seconds.

To change the date and time, adjust thesetting from the menu. [ X ] (Date/time)(p. 47)

5 Use HI to select the [ x ] timezone and then press the A button.

Use FG to turn daylight saving time ([SUMMER])on or off.

10.02.26 12:30

SUMMER OKSET

SeoulTokyoSeoulTokyo

The menus can be used to change theselected time zone. [WORLD TIME] (p. 48)


15/83

15 EN

Changing the display language

The language for the menu and error messagesdisplayed on the monitor is adjustable.

1 Display the [SETUP] menu.Using the Menu (p. 4)

2 Use FG to select the r (Settings1) tab and then press I .

COPYENGLISH

RESET

USB CONNECTION PCMENU OK

MEMORY FORMATDATA REPAIR

SETEXIT

1

2

3

1

2

INTERNAL/SDINTERNAL/SD AUTOAUTO

3 Use FG to select [ l ] and pressthe A button.

4 Use FGHI to select your language and press the A button.

5 Press the m button.

Inserting the SD/SDHC memory card (sold separately)

Always use SD/SDHC memory cards withthis camera. Do not insert other types of memory card. Using a SD/SDHC memorycard (p. 64)

Although the camera can store images ininternal memory, SD/SDHC memory cards(sold separately) can be also used to storepictures.

1

Insert the card straight until it clicks intoplace.

Do not touch the contact area directly.



1

2 3

1

2

Close the battery/card/connector cover rmly so that lock makes the clicking sound.

Number of storable pictures (still images)/Continuous recording length (movies) in theinternal memory and SD/SDHC memorycards (p. 66)

To remove the SD/SDHC memory card

1 2

Press the card in until it clicks and comesout slightly, then remove the card.

Write-protect switch

Contact area

Write-protect switch

Contact area


16/83

16 EN

Shooting, Playback, and Erasing

2 Hold the camera and compose theshot.

Horizontal grip

Vertical grip

Monitor

When holding the camera, take care not tocover the ash with your ngers, etc.

3 Press the shutter button halfwaydown to focus on the subject.

When the camera focuses on the subject, theexposure is locked (shutter speed and aperturevalue are displayed), and the AF target markchanges to green.

The camera was unable to focus if the AF targetmark ashes red. Try focusing again.

PP

1/400 F3.91/400 F3.9

AF target mark

Press halfway

Shutter speed Aperture value

Focusing (p. 60)

Shooting with the optimum

aperture value and shutter speed ( P mode) In this mode, automatic shooting settings areactivated while also allowing changes to a widerange of other shooting menu functions, suchas exposure compensation, white balance, etc.as needed.

1 Press the n button to turn onthe camera.

P mode indicator

14M44

PP

0.00.0AUTOWB

AUTOWB

AUTOISO

AUTOISO

00:3400:34

Number of storable still pictures (p. 66, 67, 68)

Monitor (standby mode screen)

If P mode is not displayed, press the m button to display the function menu screenand then set the shooting mode to P . Usingthe Menu (p. 4)

Current shooting mode display

44

0.00.0AUTOWB

AUTOWB

AUTOISO

AUTOISO


14M

PP

Press the n button again to turn off the camera.


17/83

17 EN

4 To take the picture, gently pressthe shutter button all the way downwhile being careful not to shake thecamera.

PP

1/400 F3.91/400 F3.9

Image review screen

Press fully

To view images during shootingPressing the q button enables playback of images. To return to shooting, either pressthe q button or press the shutter buttonhalfway down.

Shooting movies

1 Press the movie record button tostart recording.

00:1200:12RECREC00:3400:34

Lights up red when recording

Recording time

Continuous recording length

(p. 66, 67, 68)

The effects of the set shooting mode canbe used when shooting movies (whenP mode, p mode or Q mode isset, shooting is performed with the P modesetting).

2 Press the movie record buttonagain to stop recording.

Sound will also be recorded.

When recording sound in a movie, thesound of the lens triggering and camera

operating may be recorded.STYLUS TOUGH-3000/ TOUGH-3000:During sound recording, only the digitalzoom can be used. To record a movie withoptical zoom, set [ R ] (movies) (p. 36) to[OFF].

Using the zoom

Pressing the zoom buttons adjusts the shootingrange.

Pressing the wide(W) button

Pressing the telephoto(T) button

14 M44 44

PP

0.00.0

AUTOWB

AUTOWB

AUTOISO

AUTOISO

14 M

PP

0.00.0

AUTOWB

AUTOWB

AUTOISO

AUTOISO

00:3400:34 00:3400:34

Zoom bar

Model No. Optical zoom Digital zoomSTYLUS TOUGH-8010/ TOUGH-8010

5 5


5 5


3.6 5

To take larger images without reducingimage quality[FINE ZOOM] (p. 35)


18/83

18 EN

To take larger images[DIGITAL ZOOM] (p. 35)

The zoom bar appearance identi es thestatus of the ne zoom/digital zoom.

Fine zoomrange

Digital zoomrange

When using

optical zoom

When usingne zoom

When usingdigital zoom

Optical zoom range

Changing the shooting information display

The display of the screen information canbe changed to best match the situation, for example, the need for a clear view of the screenor for making a precise composition by using thegrid display.

1 Press F (INFO).The displayed shooting information changes inthe order shown below each time the button ispressed. Shooting mode display (p. 9)

14M44

PP

0.00.0AUTOWB

AUTOWB

AUTOISO

AUTOISO

14M44 NORM

PP

0.00.0AUTOWB

AUTOWB

AUTOISO

AUTOISO

00:3400:34

00:3400:34

Normal

Detailed

No information

Reading a histogram

If the peak lls too much of the frame,the image will appear mostly white.

If the peak lls toomuch of the frame,

the image willappear mostly black.

The green section showsluminance distributionwithin the screens center.

Viewing images

1 Press the q button.Number of frames/

Total number of images

10/02/26 12:3010/02/26 12:30

4/304/30

Playback image

2 Use HI to select an image.

Displaysprevious

image

Displaysnext image

Hold I to fast forward and hold H toreverse.

The display size of the images can bechanged. Index view, close-up view, andevent index (p. 20)


19/83

19 EN

Pausing andrestartingplayback

Press the A button to pauseplayback. During pause, fastforward or reverse, press theA button to restart playback.

Fast forwardPress I to fast forward. PressI again to increase the fastforward speed.

Rewind

Press H to rewind. The speedat which the recording rewindsincreases each time H ispressed.

Adjusting thevolume

Use FG to adjust thevolume.

Operations while playback is paused

During pause

00:14/ 00:3400:14/00:34

CueingUse F to display the rstframe and press G to displaythe last frame.

Advancingand rewindingone frame at

a time

Press I or H to advance or rewind one frame at a time.Hold I or H pressed for continuous advance or rewind.

Resumingplayback

Press the A button to resumeplayback.

To stop movie playbackPress the m button.

To play sound recordingsTo play sound recorded with an image,select the image and press the A button. A! icon appears on images with which soundhas been recorded.

[R] (still images) (p. 35, 43)

During audio playback

To play back moviesSelect a movie, and press the A button.

10/02/26 12:3010/02/26 12:30

4/304/30

OKMOVIE PLAYMOVIE PLAYMovie

Operations during movie playback

00:12/00:3400:12/00:34

During playback

Elapsed time/Total recording

time


20/83

20 EN

Erasing images during playback (Single image erase)

1 Display the image you want to eraseand press G (D ).

MENU OK

ERASE

SEL. IMAGEALL ERASE

CANCELCANCELERASE

SETBACK

2 Press FG to select [ERASE], andpress the A button.

[ALL ERASE] (p. 42) and [SEL. IMAGE](p. 42) can be used to erase multiple imagesat the same time.

Index view, close-up view, and event index

Index view enables quick selection of a desiredimage. Close-up view (up to 10 magni cation)allows checking of image details. In event

index*1

, images are grouped by the shootingdates and representative images for an eventcan be displayed.*1 Pictures with different dates can be grouped into the

same event using the PC software (ib).

1 Press the zoom buttons.

10/02/26 12:3010/02/26 12:30

4/304/30

10/02/26

10/02/26 12:3010/02/26 12:30

2

44

10/02/26

42

W T

W T

W

T

2

2 4

W T

4/304/30

10/02/26

Index view

Single-image view Close-up view

Event index


21/83

21EN

To select an image in index viewUse FGHI to select an image, and pressthe A button to display the selected imagein single-image view.

To scroll an image in close-up view

Use FGHI to move the viewing area.

To select an image in event indexUse HI to select the representative imageand press the A button. The images in theselected event are played back.

Changing the image information display

Shooting information settings displayed on thescreen can be changed.

1 Press F (INFO).The displayed image information changes inthe order shown below each time the button ispressed.

1010

10/02/26 12:3010/02/26 12:30

4/304/30

1010 4/304/30

1/1000 F3.9 2 .0

AUTOWB

AUTOISO

FILE 100 000410/02/26 12:30

PNORM 14M

960hPa0m

Normal

Detailed

No information

Reading a histogram (p. 18)

Playing back panorama images

Panorama images that were combined together using [AUTO] or [MANUAL] can be scrolled for viewing.

Creating panoramic images ( p mode)(p. 25)

1 Select a panorama image duringplayback.

Viewing images (p. 18)

10/02/26 12:3010/02/26 12:30

4/304/30

OKREPLAY

2 Press the A button.

Current viewing area

To control panorama image playbackZoom in/Zoom out: Press the A button topause playback. Then press the zoom button

to enlarge/shrink the image.Playback direction: Press the A buttonto pause playback. Then press FGHI to scroll the image in the direction of thepressed button.Pause: Press the A button.Restart scrolling: Press the A button.Stop playback: Press the m button.


22/83

22 EN

Using the menu guide

If the E button is pressed while settings arebeing adjusted in the playback function or [SETUP] menus, a description of the selectedoption is displayed.

Using the Menu (p. 4)

Using the camera guide

Use the camera guide to look up cameraoperations.

1 Press the E button in the standbymode screen or the playbackscreen.

IN-CAMERA MANUAL

Learn about the cameraHistory

Message

OKSETEXIT

SearchSearch

Submenu 2 Application

Search Functions or operating methodscan be searched from a term or shooting objective.

Learn about thecamera

Information is shown aboutrecommended functions and basicoperating methods for the camera.

History Searches can be performed fromthe search history.

Message Messages from the camera canbe viewed.

2 Use FG to select the desired item.

HistoryMessage

IN-CAMERA MANUAL

OKSETEXIT

SearchLearn about the cameraLearn about the camera

Follow the on-screen instructions to search thedesired contents.


23/83

23 EN

Using Shooting Modes

Using the best mode for the

shooting scene ( s mode)

1 Set the shooting mode to s .

14M44

SCENE MODESCENE MODE

0.00.0AUTOWB

AUTOWB

2 Press G to go to the submenu.

14M44

0.00.0AUTOWB

AUTOWB

PORTRAITPORTRAIT

3 Use HI to select the mode andthen press the A button to set.

14M44

0.00.0

AUTOWB

AUTOWB

00:3400:34

Icon indicating the scene modethat is set

To change the shooting mode

The shooting mode ( P , M , s , P ,p , Q ) can be changed with using thefunction menu.Using the Menu (p. 4)

Shooting with automatic settings ( M mode)

The camera will automatically select the optimalshooting mode for the scene. This is a fullyautomatic mode that allows you to take a picture

suited to the scene by simply pressing theshutter button. In M mode, settings in theshooting menu can be selected, but the changedsetting is not re ected in the actual shot.

1 Set the shooting mode to M .

44 14M NORM00:3400:34

The icon changes depending on the scenethat the camera automatically selects.

In some cases, the camera may not selectthe desired shooting mode.

When the camera cannot identify theoptimal mode, P mode will be selected.


24/83

24 EN

In s modes, the optimum shootingsettings are pre-programmed for speci cshooting scenes. For this reason, settingsmay not be changed in some modes.

Option Application

B PORTRAIT/ F LANDSCAPE/G NIGHT SCENE *1/M NIGHT+PORTRAIT/C SPORT/ N INDOOR/W CANDLE *1/R SELF PORTRAIT/S SUNSET *1/X FIREWORKS *1/VCUISINE/ d DOCUMENTS/q BEACH & SNOW/T SNAPSHOT/ k WIDE1 *2/l WIDE2 *2/H MACRO *2/

PET/ a SNOW *2

The cameratakes a pictureusing theoptimum settingsfor the sceneconditions.

*1

When the subject is dark, noise reduction isautomatically activated. This approximately doublesthe shooting time during which no other pictures canbe taken.

*2 STYLUS TOUGH-8010/ TOUGH-8010 andSTYLUS TOUGH-6020/ TOUGH-6020 only

To take underwater photosSelect [ T SNAPSHOT], [ k WIDE1] *1,[l WIDE2] *1, 2 , [H MACRO] *1.

*1 STYLUS TOUGH-8010/ TOUGH-8010 andSTYLUS TOUGH-6020/ TOUGH-6020 only

*2 When set to [ l WIDE2], the focus distanceis automatically xed to approx. 5.0 m(16.4 ft.).

Important information about water andshock resistant features (p. 69)

To lock the focus distance for underwater shoots (AF lock)When [ T SNAPSHOT], [ k WIDE1] *,or, [ H MACRO] * is selected, press theA button.

* STYLUS TOUGH-8010/ TOUGH-8010 and

STYLUS TOUGH-6020/ TOUGH-6020 only

14 M44

0.00.0

AUTOWBAUTOWB

AF LOCKAF LOCKAF lock mark

To cancel, press the A button again to clear the AF lock mark.

To take pictures of a moving subjectlike a pet ([ PET] mode)1 Use HI to select [ PET], and press

the A button to set.

2 Hold the camera to align the AF targetmark on the subject and press the A button.

When the camera recognizes the subject,the AF target mark automatically tracks thesubject movement to focus on it continuously.To focus on a moving subject continuously(AF Tracking) (p. 34).

Shooting with special effects ( P mode)

To add expression to your photo, select thedesired special effect.

1 Set the shooting mode to P .

MAGIC FILTERMAGIC FILTER

0.00.0

AUTOWB

AUTOWB

14 M44


POP ART

0.00.0

AUTO

WB

AUTO

WB


25/83

25 EN

3 Use HI to select the desired effectand then press the A button to set.

0.00.0AUTOWB

AUTOWB

14M4400:3400:34

Icon indicating P mode thatis set

Shooting mode Option

MAGIC FILTER

[ POP ART\ PIN HOLE] FISH EYE@ DRAWING

In P mode, the optimum shootingsettings are pre-programmed for eachscene effect. For this reason, some settingscannot be changed in some modes.

Creating panoramic images ( p mode)

1 Set the shooting mode to p .

PANORAMAPANORAMA

0.00.0AUTOWB

AUTOWB

AUTOAUTO

14M44


3 Use HI to select the desired modeand then press the A button to set.


AUTO

Three frames are taken andcombined by the camera. Theuser only composes the shotsso that the target marks andpointers overlap, and the cameraautomatically releases the shutter.

MANUAL

Three frames are taken andcombined by the camera. Theuser composes the shots usingthe guide frame and manuallyreleases the shutter.

PCThe frames that were taken arecombined into a panorama imageusing the PC software (ib).

For details on installing the PC software(ib), see Battery charge and camera setup(p. 11).

When set to [AUTO] or [MANUAL], [IMAGESIZE] (p. 33) is xed to [ 2 ].The focus, exposure (p. 30), zoom position(p. 17), and white balance (p. 30) are lockedat the rst frame.

The ash (p. 28) is xed to $ (FLASH OFF)mode.

Taking pictures with [AUTO]1 Press the shutter button to take the rst

frame.2 Move the camera slightly in the direction

of the second frame.

AUTOAUTO

MENU OKSAVECANCEL

Target mark

Pointer

Screen when combining imagesfrom left to right


26/83

26 EN

3 Move the camera slowly while keeping itstraight, and stop the camera where thepointer and target mark overlap.

The camera releases the shutter automatically.

AUTOAUTO

MENU OKSAVECANCEL

To combine only two pictures, press theA button before taking a third frame.

4 Repeat Step 3 to take a third frame.After the third frame is taken, the cameraautomatically processes the frames and thecombined panorama image is displayed.

To exit the panorama function withoutsaving an image, press the m button.If the shutter does not automatically release,try [MANUAL] or [PC].

Taking pictures with [MANUAL]

1 Use HI to specify at which edge thenext picture is to be connected.

MANUALMANUAL

1 21 2

MENUBACK

Direction for combining the

next frame

2 Press the shutter button to take the rstframe.

1st frame

MANUALMANUAL

1 21 2

MANUALMANUAL

1 21 2

MENUBACK MENU OKSAVECANCEL

Joint areas

3 Compose the next shot so that joint area1 overlaps joint area 2.

Composition of the 2nd frame

MANUALMANUAL

1 21 2

MENU OKSAVECANCEL

4 Press the shutter button to take the nextshot.

To combine only two pictures, press the

A button before taking the third frame.5 Repeat steps 3 and 4 to take a third

frame.After the third frame is taken, the cameraautomatically processes the frames and thecombined panorama image is displayed.

To exit the panorama function withoutsaving an image, press the m button.


27/83

27 EN

Taking pictures with [PC]1 Use FGHI to select the direction that

the frames are combined.2 Press the shutter button to take the rst

frame, and then compose the second

shot.

PCPC

1 21 2

MENUEXIT

PCPC

1 21 2

MENUBACK

Before rstshot

After rstshot

After the rst shot, the area shown in whitereappears on the side of the display oppositethe pan direction. Frame subsequentphotographs so that they overlap with theimage in the monitor.

3 Repeat Step 2 until the number of desired frames is taken, and then pressthe A button or m button whennished.

Panorama shooting is possible for up to10 frames.

Refer to the PC software (ib) help guide for details on how to make panorama images.

Smoothing out skin tone and texture ( Q mode)

The camera identi es a persons face and givesthe skin a smooth, translucent look for takingthe picture.

1 Set the shooting mode to Q .

14M44

0.00.0AUTOWB

AUTOWB

BEAUTYBEAUTY PP

2 Point the camera toward thesubject. Check the frame appearingaround the face detected by thecamera, and then press the shutter button to take the picture.

The unedited image and edited image are bothsaved.

If the image cannot be retouched, only theunedited image is saved.

The frame may not appear or may takesome time to appear for some subjects. Inaddition, this function may have no visibleeffect on some subjects.

The [IMAGE SIZE] of the retouched imageis limited to [ n ] or lower.


28/83

28 EN

Using Shooting Functions

Shooting closeups

(Macro shooting) This function enables the camera to focus andshoot subjects at close distances.

1 Select the macro option in theshooting function menu.

14M44

PP

0.00.0AUTOWB

AUTOWB

AUTOISO

AUTOISO

OFFOFF

2 Use HI to select the settingoption, and press the A button toset.

Using the Menu (p. 4)

Using the ash

The ash functions can be selected to bestmatch the shooting conditions.

1 Select the ash option in theshooting function menu.

14M44

PP

0.00.0AUTOWB

AUTOWB

AUTOISO

AUTOISO

FLASH AUTOFLASH AUTO


Option Description

FLASH AUTO Theash res automatically in

low-light or backlight conditions.

REDEYEPre- ashes are emitted to reducethe occurrence of red eye in your photos.

FILL INThe ash res regardless of theavailable light.

FLASH OFF The ash does not re.

REMOTECONTROL * For details, see Using an external

ash (p. 37).SLAVE

* STYLUS TOUGH-8010/ TOUGH-8010 only

[REMOTE CONTROL] and [SLAVE] are notdisplayed when [REMOTE FLASH] (p. 37) isset to [OFF].


29/83

29 EN

Option Application Description

OFF Macro mode isdeactivated.

MACRO

This enables thecamera to shootsubjects at closedistances.

When the zoom is at the widest (W) position, this function enablesshooting as close as the following distances.

STYLUS TOUGH-8010/ TOUGH-8010,STYLUS TOUGH-6020/ TOUGH-6020

STYLUS TOUGH-3000/TOUGH-3000

20 cm (7.9 in.) 10 cm (3.9 in.)

When the zoom is at the most telephoto (T) position, this functionenables shooting as close as the following distances.



50 cm (19.7 in.) 30 cm (11.8 in.)

SUPER MACRO *1This enables thecamera to shootsubjects at even closer distances.

This function enables shooting as close as the following distances.



3 cm (1.2 in.) 2 cm (0.8 in.)

Subjects at the following or farther distances cannot be broughtinto focus.



60 cm (23.6 in.) 50 cm (19.7 in.)

S-MACRO LED *2, 3

The LED illuminator lights the area 7 to20 cm (2.8 to 7.9 in.)

from the lens, whilethe shutter button ispressed halfway down.

*1 The zoom is automatically xed.*2 ISO sensitivity (p. 31) is automatically xed to [ISO AUTO].*3 STYLUS TOUGH-8010/ TOUGH-8010 and STYLUS TOUGH-6020/ TOUGH-6020 only

The ash (p. 28) and zoom (p. 17) cannot be set when [ a SUPER MACRO] or [ N S-MACRO LED]is selected.


30/83

30 EN

Using the self-timer

After the shutter button is pressed all the waydown, the picture is taken after a short delay.

1 Select the self-timer option in theshooting function menu.

14 M44

PP

0.00.0

AUTOWB

AUTOWB

AUTOISO

AUTOISO

OFF 121222OFF


Option Description

Y OFF The self-timer is deactivated.

Y 12 SEC

The self-timer lamp turns on for approx. 10 seconds, then blinksfor approx. 2 seconds, and thenthe picture is taken.

Y 2 SECThe self-timer lamp blinks for approx. 2 seconds, then thepicture is taken.

Self-timer shooting is automatically canceledafter one shot.

To cancel the self-timer after it startsPress the m button.

Adjusting the brightness (Exposure compensation)

The standard brightness (appropriate exposure)set by the camera based on the shooting mode(except for M ) can be adjusted brighter or

darker to obtain a desired shot.

1 Select the exposure compensationoption in the shooting functionmenu.

0.0

0.30.30.00.00.30.3

AUTOWB

AUTOWB

AUTOISO

AUTOISO

PP

2 Use HI to select the desiredbrightness, and press the A button.

Adjusting to a natural color scheme (White balance)

For more natural coloring, choose a whitebalance option suited to the scene.

1 Select the white balance option inthe shooting function menu.

0.00.0

AUTOWBAUTOWB

AUTOISO

AUTOISO

PPWB AUTO


31/83

31EN


Option Description

WB AUTO The camera automatically adjuststhe white balance according to theshooting scene.

5 For shooting outdoors under aclear sky.

3 For shooting outdoors under acloudy sky.

1 For shooting under tungstenlighting.

wFor shooting under daylightuorescent lighting (householdlighting, etc.)

xFor shooting under neutraluorescent lighting (desk lamps,etc.)

y For shooting under whiteuorescent lighting (of ces, etc.)

O *For underwater shooting (thissetting is available when the s mode is set to [ k WIDE1]).

P *For underwater shooting (thissetting is available when the s mode is set to [ l WIDE2]).

Q *For underwater shooting (thissetting is available when the s mode is set to [ H MACRO]).

* STYLUS TOUGH-8010/ TOUGH-8010 andSTYLUS TOUGH-6020/ TOUGH-6020 only

Selecting the ISO sensitivity

Abbreviation for the InternationalOrganization for Standardization. ISOstandards specify the sensitivity for digitalcameras and lm, thus codes such as ISO

100 are used to represent sensitivity.In the ISO setting, although smaller valuesresult in less sensitivity, sharp images canbe taken under fully lit conditions. Larger values result in higher sensitivity, andimages can be taken at fast shutter speedseven under low light conditions. However,high sensitivity introduces noise into theresulting picture, which may give it a grainyappearance.

1 Select the ISO setting option in theshooting function menu.

PP

0.00.0AUTOWB

AUTOWB

AUTOISO

AUTOISO

1600ISOISO

1600

1/400 F3.91/400 F3.9

HIGHISOHIGHISOISO AUTOISO AUTO


Option Description

ISO AUTOThe camera automatically adjuststhe sensitivity according to theshooting scene.

HIGH ISO AUTO

The camera uses a higher sensitivity compared to[ISO AUTO] to minimize blur caused by a moving subject or bycamera shake.

Value The ISO sensitivity isxed to the

selected value.


32/83

32 EN

Sequential shooting (Drive)

Pictures are taken sequentially while the shutter button is held down.

1 Select the drive option in theshooting function menu.

0.00.0AUTOWB

AUTOWB

AUTOISO

AUTOISO

PP

SEQUENTIALSEQUENTIAL

Option Description

o One frame is shot each time theshutter button is pressed.

j *1Take sequential shots using thefocus, brightness (exposure) andwhite balance set in the rst frame.

W The camera takes sequential shotsat a faster speed than in [ j ].

*1 The shooting speed varies depending on thesettings for [IMAGE SIZE/COMPRESSION] (p. 33).

When set to [ j ], the ash (p. 28) cannotbe set to [REDEYE]. In addition, when set to[W ] the ash is xed to [FLASH OFF].

When set to [ W ], [IMAGE SIZE] is limitedto [3 ] or lower, and the ISO sensitivity isxed to [ISO AUTO].

Using the LED illuminator

(STYLUS TOUGH-8010/ TOUGH-8010 andSTYLUS TOUGH-6020/ TOUGH-6020 only)

In a dark location, the LED illuminator canbe used as an auxiliary light to see things or compose shots.

1 Set [LED ILLUMINATOR] (p. 52) to[ON].

2 Press and hold F down until theLED illuminator lights up.

If you perform an operation when the LEDilluminator is on, it will illuminate up to approx. 90seconds.

LEDilluminator

The LED illuminator turns off if no operationis performed for approx. 30 seconds.

Even when the cameras power is turnedoff, if F is pressed until the LED illuminator lights up, it lights for 30 seconds.

To turn the LED illuminator off Press and hold F down, until the LEDilluminator turns off.


33/83

33 EN

For information on using the menus, see Using the Menu (p. 4).

Menus for Shooting Functions

The default settings of the function are highlighted in .

Selecting the image quality for still images [IMAGE SIZE/COMPRESSION] I (Shooting menu 1) IMAGE SIZE/COMPRESSION

Available shooting modes: P M s P p Q

Submenu 1 Submenu 2 Application

IMAGE SIZE

14M (42883216) *1Suitable for printing pictures over A3 (1117 in.).

12M (39682976) *2

8M (32642448) Suitable for printing pictures up to A3 (1117 in.).

5M (25601920) Suitable for printing pictures at A4 (8.511 in.).

3M (20481536) Suitable for printing pictures up to A4 size (8.511 in.).

2M (16001200) Suitable for printing pictures at A5 (57 in.).

1M (1280960) Suitable for printing pictures at postcard size.

VGA (640480) Suitable for viewing pictures on a TV or using pictures on emails andweb sites.

16:9 G (42882416)*1

(39682232) *2Suitable for playing pictures on a widescreen TV and for printing onA3 or 11"17".

16:9 F (19201080) Suitable for playing pictures on a widescreen TV and for printing onA5 or 5"7".

COMPRESSIONFINE Shooting at high quality.

NORMAL Shooting at normal quality.


Number of storable pictures (still images)/Continuous recording length (movies) in the internalmemory and SD/SDHC memory cards (p. 66)

Selecting the image quality for movies [IMAGE SIZE/IMAGE QUALITY]

A (Movie menu) IMAGE SIZE/IMAGE QUALITYAvailable shooting modes: P M s P p Q


IMAGE SIZE720PVGA (640480)QVGA (320240)

Select the image quality based on the image size and frame rate.

IMAGE QUALITY FINE/NORMAL Select [FINE] to shoot with higher image quality.

Number of storable pictures (still images)/Continuous recording length (movies) in the internal

memory and SD/SDHC memory cards (p. 66)When [IMAGE SIZE] is set to [QVGA], [IMAGE QUALITY] is xed to [FINE].


34/83

34 EN

Brightening the subject against backlight [SHADOW ADJUST]

I (Shooting menu 1) SHADOW ADJUST



AUTOThe shadow adjustment effect isapplied when shooting againstbacklight.

OFF The effect is not applied.

ONShoot with automatic adjustmentto brighten an area that hasbecome darker.

When set to [ON], [ESP/ n ] (p. 34) isautomatically xed to [ESP].

Selecting the focusing area [AF MODE] I (Shooting menu 1) AF MODE



FACE/iESP *1

The camera focuses automatically.(If a face is detected, it is shownby a white frame *1; when theshutter button is pressed halfwayand the camera focuses, theframe turns to green *2. If no face isdetected, the camera chooses asubject in the frame and focusesautomatically.)

SPOTThe camera focuses on thesubject located within the AFtarget mark.

AF TRACKINGThe camera tracks the subjectmovement automatically to focuson it continuously.

*1 For some subjects, the frame may not appear or may take some time to appear.

*2 If the frame blinks in red, the camera cannot focus.Try refocusing on the subject.

To focus on a moving subjectcontinuously (AF Tracking)1 Hold the camera to align the AF target

mark on the subject and press theA button.

2 When the camera recognizes the subject,the AF target mark automatically tracksthe subject movement to focus on itcontinuously.

3 To cancel the tracking, press theA button.

Depending on the subjects or the shootingconditions, the camera may be unable tolock the focus or fail to track the subject

movement.When the camera fails to track the subjectmovement, the AF target mark changes tored.

Selecting the method for measuring the brightness [ESP/ n ]

I (Shooting menu 1) ESP/ n

Available shooting modes: P M s P p

Q


ESP

Shoots to obtain a balancedbrightness over the entire screen(Meters the brightness at thecenter and surrounding areas of the screen separately).

5 (spot)

Shoots the subject at the center during backlighting (Meters thebrightness at the center of thescreen).

When set to [ESP], the center mayappear dark when shooting against strongbacklighting.


35/83

35 EN


Shooting at higher magni cations than optical zoom without reducing the image quality [FINE ZOOM]

I (Shooting menu 1) FINE ZOOM



OFF Optical zoom is used to zoom infor shooting.

ONOptical zoom and image croppingare combined to zoom in for shooting. *1

*1STYLUS TOUGH-8010/ TOUGH-8010,STYLUS TOUGH-6020/ TOUGH-6020

Approx. 33.5 (max.)


Approx. 22 (max.)

This function will not reduce the imagequality since it dose not convert the datawith fewer pixels into the data with larger pixels.

When set to [ON], [IMAGE SIZE] is limitedto [4 ] or lower.The setting is not available when[DIGITAL ZOOM] is set to [ON].

[FINE ZOOM] is not available when[a SUPER MACRO] (p. 28) or [N S-MACRO LED] (p. 28) is selected.

Shooting at higher magni cations than optical zoom [DIGITAL ZOOM]

I (Shooting menu 1) DIGITAL ZOOM



OFFOnly optical zoom is used to zoomin for shooting.

ONOptical zoom and digital zoomare combined to zoom in for shooting. *1

*1STYLUS TOUGH-8010/ TOUGH-8010,STYLUS TOUGH-6020/ TOUGH-6020

Approx. 25 (max.)


Approx. 18 (max.)

The setting is not available when[FINE ZOOM] is set to [ON].

[DIGITAL ZOOM] is not availablewhen [ a SUPER MACRO] (p. 28) or [N S-MACRO LED] (p. 28) is selected.

Recording sound when shooting still images [ R ]

J (Shooting menu 2) R



OFF No sound is recorded.

ON

The camera automatically startsrecording sound for approx.4 seconds after a picture is taken.This is useful for recording notesor comments about the picture.

When recording, aim the microphone (p. 7 *1,8 *2) at the source of the sound you want torecord.*1 STYLUS TOUGH-3000/ TOUGH-3000*2 STYLUS TOUGH-8010/ TOUGH-8010,



36/83

36 EN

Recording sound when shooting movies [ R ]

A (Movie menu) R



OFF No sound is recorded.

ON Sound is recorded.

When recording sound in a movie, thesound of the lens triggering and cameraoperating may be recorded.

STYLUS TOUGH-3000/ TOUGH-3000:When set to [ON], only the digital zoom canbe used during movie recording. To recordthe movie with the optical zoom, set [ R ](movies) to [OFF].

Reducing the blur caused by the camera shake when shooting [IMAGE STABILIZER] (still images)/ [IS MOVIE MODE] (movies)

I (Shooting menu 1) IMAGE STABILIZER (still images)/A (Movie menu) IS MOVIE MODE (movies)



OFF

The image stabilizer is

deactivated. This is recommendedfor shooting when the camera isxed in place on a tripod or other stable surface.

ON The image stabilizer is activated.

The cameras default settings are [IMAGESTABILIZER] (still images) to [ON] and [ISMOVIE MODE] (movies) to [OFF].

There may be a noise coming from insidethe camera when the shutter button ispressed with [IMAGE STABILIZER] (stillimages) set to [ON].

Images may not be stabilized if camerashake is too severe.

When the shutter speed is extremely slow,such as when taking pictures at night,

[IMAGE STABILIZER] (still images) may notbe as effective.

When shooting while the [IS MOVIE MODE](movies) is set to [ON], the image will beenlarged somewhat before saving.

Viewing the image immediately after shooting [REC VIEW]

J (Shooting menu 2) REC VIEW



OFF

The image being recorded is notdisplayed. This allows the user to prepare for the next shot whilefollowing the subject in the monitor after shooting.

ON

The image being recorded isdisplayed. This allows the user to

make a brief check of the imagethat was just taken.


37/83

37 EN


Automatically rotating images shot with the camera in a vertical position during playback [PIC ORIENTATION]

(STYLUS TOUGH-8010/ TOUGH-8010 andSTYLUS TOUGH-6020/ TOUGH-6020 only)

J (Shooting menu 2) PIC ORIENTATION


During shooting, the [ y ] (p. 43) setting onthe playback menu is set automatically.

This function may not work properly if

the camera is facing up or down duringshooting.


OFF

Information about the vertical/horizontal orientation of thecamera during shooting is notrecorded with images. Imagesshot with the camera in a verticalposition are not rotated duringplayback.

ON

Information about the vertical/

horizontal orientation of thecamera during shooting isrecorded with images. Imagesare automatically rotated duringplayback.

Displaying icon guides [ICON GUIDE] J (Shooting menu 2) ICON GUIDE

Available shooting modes: P M s P p

Q


OFF No icon guide is displayed.

ON

The explanation of the selectedicon will be displayed whena shooting mode or shootingfunction menu icon is selected(position the cursor on the icon for a while to display the explanation).

Icon guide

14M44

0.00.0AUTOWB

AUTOWB

AUTOISO

AUTOISO

PPFunctions can be changedmanually.


Using an external ash [REMOTE FLASH]

(STYLUS TOUGH-8010/ TOUGH-8010 only)

J (Shooting menu 2) REMOTE FLASH



OFF The external ash is not available.

# RCAn Olympus Wireless RC FlashSystem compatible ash is usedfor taking pictures. (Channel: CH1,Group: A)

SLAVE

The commercially-available slaveash that is synchronized with thecamera ash is used for takingpictures. The ash intensity settingcan be adjusted.

Taking pictures with the Olympus WirelessRC Flash System (p. 69)


38/83

38 EN

Menus for Playback, Editing, andPrinting Functions


Data must have been created with the PC software (ib) before using some function.Refer to the PC software (ib) help guide for details on how to use the PC software (ib).

For details on installing the PC software (ib), see Battery charge and camera setup (p. 11).

Playing back pictures automatically [SLIDESHOW]

SLIDESHOW


SLIDEALL/EVENT/COLLECTION

Selects the contentto be included in theslideshow.

BGM

OFF/Cosmic/Breeze/Mellow/Dreamy/Urban

Selects thebackground musicoptions.

TYPESTANDARD/FADE/ZOOM

Selects the type of transition effect usedbetween slides.

START Starts the slideshow.

Single-frame advance/rewind:During a slideshow, press I to skip aheadone frame or press H to go back one frame.

Searching for images and playing back the related images [PHOTO SURFING]

PHOTO SURFING

In [PHOTO SURFING], images can besearched and related images can be playedback by selecting the related items.

To start [PHOTO SURFING]Press the A button to start[PHOTO SURFING].When a related item of the image displayedis selected with FG , images related to theitem are displayed in the lower part of themonitor. Use HI to display an image.To select the related items undisplayed,press the A button when selecting an item.To stop [PHOTO SURFING], press them button, or select [BACK] and pressthe A button.

2010/02/262010/02/26

35N139E35N

139E

BACKBACK

Related items

Images corresponding therelated items


39/83

39 EN


Viewing images by event [EVENT q ] EVENT q

In [EVENT q ], images in an event are

played back. (Images with the sameshooting date are grouped into the sameevent.)

To start [EVENT q ]Press the A button to start [EVENT q ].(The event, including the image for whichsingle-image view was being performedwhen the playback function menu wasselected, is played back.)Use HI to advance or rewind by oneframe.To stop [EVENT q ], press them button.

10/02/26 12:3010/02/26 12:30

4/304/30

MENU

OK

EXITEXIT

PLAYPLAY

Playing back images by Collection created with the PC software (ib) [COLLECTION q ]

COLLECTION q

In [COLLECTION q ], the collection isplayed back that has been created with thePC software (ib) and imported back from acomputer.

To start [COLLECTION q ]Press the A button, and then use FGHI to select the desired collection. Press theA button again to start playback of the

selected collection. Use HI to advance or rewind by one frame.To stop [COLLECTION q ], press them button.

COLLECTION

MENU OKSETBACK

Using a PC software (ib) and importing data back to the camera

The following functions can be performedwhen data created with the PC software (ib)is imported back to the camera.

Refer to the PC software (ib) help guide for details on how to use the PC software (ib).

[PHOTO SURFING]Information of persons or shooting locationsand new Collections can be added in therelated items.

[EVENT q ]Images can be played back by event createdwith the PC software (ib).

Event index (p. 20)The representative images for an eventcreated with the PC software (ib) can bedisplayed.


40/83

40 EN

Retouching the skin and eyes [BEAUTY FIX]

BEAUTY FIX

Depending on the picture, the editing maynot be effective.


ALL

[CLEAR SKIN],[SPARKLE EYE] and[DRAMATIC EYE] areapplied together.

CLEAR SKIN SOFT/AVG/HARD

Makes skin looksmooth andtranslucent. Select thecorrection effect from3 levels.

SPARKLE EYE Enhances the contrastof the eyes.

DRAMATICEYE

Enlarges the subjectseyes.

1 Use FG to select a correction item, andpress the A button.

2 Use HI to select an image for retouching, and press the A button.

The retouched image is saved as a separateimage.

When [CLEAR SKIN] is selectedUse FG to select the retouching level, andpress the A button.

CLEAR SKIN

MENU OKSETBACK

AVG

SOFTSOFT

HARD

Changing the image size [ Q ] EDIT Q


C 640 480 This saves a high-resolution imageas a separate image with a smaller size for use in e-mail attachmentsand other applications.E 320 240

1 Use HI to select an image.2 Use FG to select an image size and

press the A button.The resized image is saved as a separateimage.

Cropping image [ P ] EDIT P

1 Use HI to select an image, and pressthe A button.

2 Use the zoom buttons to select the size of the cropping frame, and use FGHI tomove the frame.

Cropping frame

OKSET

3 Press the A button after you haveselected the area to trim.

The edited image is saved as a separateimage.


41/83

41EN


Changing the color tone of image [COLOR EDIT]

EDIT COLOR EDIT


BLACK & WHITE This changes the image to blackand white.

SEPIAThis changes the image to asepia tone.

HIGHSATURATION

This increases the color saturationof the image.

LOWSATURATION

This slightly increases the color saturation of the image.

COLOR EDIT

MENU OKSETEXIT

SEPIA


2 Use HI to select the desired color, andpress the A button.

The image with the selected color is saved asa separate image.

Adding a calendar to an image [CALENDAR]

EDIT CALENDAR

CALENDAR

OKSET


2 Use HI to select a calendar. Use FG to select the image orientation, and then

press the A button.

3 Use FG to select the Year of thecalendar, and press I .

4 Use FG to select the Month of thecalendar, and press the A button.


Brightening areas that are dark due to backlight or other reasons [SHADOW ADJ]

EDIT SHADOW ADJ




The retouching process may lower theimage resolution.

Retouching red eyes in ash shooting [REDEYE FIX]

EDIT REDEYE FIX




The retouching process may lower theimage resolution.


42/83

42 EN

Erasing images [ERASE] ERASE


ALL ERASEAll images in the internal memoryor card will be erased.

SEL. IMAGEImages are individually selectedand erased.

ERASE/ERASE EVENT *1

Deletes the image displayed.

CANCEL Cancels deletion of the image.

*1 If G is pressed when an event is played back, allimages in the event are erased.

When erasing pictures in the internal

memory, do not insert the card into thecamera. Or set [INTERNAL/SD] to [IN].

Before erasing pictures from a memorycard, insert the card into the cameraand select [AUTO] for [INTERNAL/SD].Selecting a storage device [INTERNAL/SD] (p. 44)

Protected images cannot be erased.

To individually select and eraseimages [SEL. IMAGE]

1 Use FG to select [SEL. IMAGE], andpress the A button.

2 Use HI to select the image to beerased, and press the A button to add aR mark to the image.

Press the W zoom button to display an indexview. Images can be quickly selected usingthe FGHI buttons. Press the T button toreturn to the single frame display.

MENUOK

SEL. IMAGE

ERASE/CANCEL

R mark

3 Repeat Step 2 to select the images to beerased, and then press the m buttonto erase the selected images.

4 Use FG to select [YES], and press the

A button.The images with a R mark are erased.

To erase all images [ALL ERASE]1 Use FG to select [ALL ERASE], and

press the A button.2 Use FG to select [YES], and press the

A button.

Saving print settings to the image data

[PRINT ORDER] q (Playback menu) PRINT ORDER

Print reservations (DPOF) (p. 56)

Print reservation can be set only for stillimages that are recorded to the card. Set[INTERNAL/SD] to [AUTO].

Protecting images [ 0 ] q (Playback menu) 0

Protected images cannot be erased by[ERASE] (p. 20, 42), [ERASE EVENT](p. 42), [SEL. IMAGE] (p. 42), or [ALL ERASE] (p. 42), but all images areerased by [MEMORY FORMAT]/[FORMAT](p. 44).

1 Use HI to select an image.2 Press the A button.

Press the A button again to cancel thesettings.

3 If necessary, repeat Steps 1 and 2 to protect other images, and press them button.


43/83

43 EN


Rotating images [ y ] q (Playback menu) y

1 Use HI to select an image.

2 Press the A button to rotate the image.3 If necessary, repeat Steps 1 and 2 to

make settings for other images, and pressthe m button.The new picture orientations will be savedeven after the power is turned off.

Adding sound to still images [ R ] q (Playback menu) R

1 Use HI to select an image.2 Aim the microphone toward the sound

source.


Microphone


Microphone


Microphone

3 Press the A button.Recording starts.

The camera adds (records) sound for approx.4 seconds while playing back the image.


44/83

44 EN


Restoring data in the camera [DATA REPAIR]

r (Settings 1) DATA REPAIR

Playback will become available byperforming [DATA REPAIR] when imagesnever appear on the monitor after q buttonis pressed. However, data such ascollections and other groups created withthe PC software (ib) is deleted from the

database in the camera.Import the data back into the camera from acomputer to playback the data created withthe PC software (ib).

Copying images in the internal memory to the card [ u COPY]

r (Settings 1) u COPY

To copy images in the internal memory

to the cardUse HI to select an image, and press theA button.

Changing the display language [ l ] r (Settings 1) l

Changing the display language (p. 15)


LanguagesThe language for the menus anderror messages displayed on themonitor is selected.

Menus for Other Camera Settings

Selecting a storage device [INTERNAL/SD]

r (Settings 1) INTERNAL/SD


AUTO

If a card is inserted, the card isautomatically selected. If no cardis inserted, internal memory isused.

IN*1

Internal memory is selected.*1 Internal memory is used even if a card is inserted.

Erasing data completely [MEMORY FORMAT]/[FORMAT]

r (Settings 1) MEMORY FORMAT/FORMAT

Before formatting, check that no importantdata is left in the internal memory or card.

If the internal memory is formatted, thecamera instruction manual and the PCsoftware (ib) data that are stored on theinternal memory are erased. If necessary,store the backup before formatting.

Cards must be formatted with this camerabefore rst use or after being used withother cameras or computers.


YES*1

Completely erases the image data

in the internal memory or card(including protected images).

NO Cancels formatting.

*1 If [AUTO] is selected for [INTERNAL/SD] and a cardis inserted, the card will be formatted. If no card isinserted, internal memory will be formatted.If [IN] is selected for [INTERNAL/SD], internalmemory will be formatted whether a card is insertedor not.


45/83

45 EN


Restoring the shooting functions to the default settings [RESET]

r (Settings 1) RESET


YES

Restores the following menufunctions to the default settings.

Flash (p. 28)Macro (p. 28)Self-timer (p. 30)Exposure compensation (p. 30)White balance (p. 30)ISO (p. 31)Drive (p. 32)Menu functions in [ I , J ,A ] (p. 33 to 37)

NO The current settings will not bechanged.

Selecting a method for connecting the camera to other devices [USB CONNECTION]

r (Settings 1) USB CONNECTION


AUTOWhen the camera is connectedto another device, the settingsselection screen is displayed.

STORAGESelect when connecting thecamera to a computer via astorage device.

PCSelect when connecting a cameraand computer.

PRINT Select when connecting to aPictBridge-compatible printer.

System requirementsWindows : Windows 2000 Professional/

XP Home Edition/XP Professional/Vista/Windows 7

Macintosh : Mac OS X v10.3 or later

When using another system other thanWindows XP (SP2 or later)/Windows Vista/Windows 7, set to [STORAGE].

Even if a computer has USB ports, proper operation is not guaranteed in the followingcases:

Computers with USB ports installed using an

expansion card, etc.Computers without a factory-installed OS andhome-built computers

Turning on the camera with the q button [ q POWER ON]

s (Settings 2) q POWER ON


YESPressing the q button turns onthe camera and starts the camerain the playback mode.

NOThe camera is not turned on. Toturn on the camera, press then button.

Saving the mode when the camera is turned off [SAVE SETTINGS]

s (Settings 2) SAVE SETTINGS


YES

The shooting mode is savedwhen the camera is turned off andis reactivated the next time thecamera is turned on.

NOThe shooting mode is set to P mode when the camera is turnedon.

Choosing the opening screen display [PW ON SETUP]

s (Settings 2) PW ON SETUP


OFF No opening screen is displayed.

ONThe opening screen is displayedwhen the camera is turned on.


46/83

46 EN

Selecting the camera sound and its volume [SOUND SETTINGS] s (Settings 2) SOUND SETTINGS

Submenu 2 Submenu 3 Submenu 4 Application

SILENT MODE *1, 2 OFF/ON

Select [ON] to disable camera sounds(operation sounds, shutter sound, andwarning sounds) and mute sound duringplayback.

BEEPSOUND TYPE 1/2/3 Selects the operating sound and volume

of the camera buttons (except the shutter button).VOLUME

OFF (No Sound)/LOW/HIGH

SHUTTER SOUNDSOUND TYPE 1/2/3

Selects the type and volume of the shutter sound.VOLUME OFF (No Sound)/

LOW/HIGH

8OFF (No Sound)/LOW/HIGH Selects the warning sound volume.

q VOLUME OFF (No Sound) or 5 levels of volume Selects the image playback volume.

*1 Even when [SILENT MODE] is [ON], FG can be used to adjust volume during playback.*2 Even when [SILENT MODE] is [ON], sound is played when images are displayed on a television.

Resetting the le names of pictures [FILE NAME]

s (Settings 2) FILE NAME

Month: 1 to C(A=October,B=November,C=December)

Day: 01 to 31

Pmdd

Folder name Folder name File name

DCIM 100OLYMP

999OLYMP

Pmdd0001.jpg

Pmdd9999.jpg

Automaticnumbering

Automaticnumbering


RESET

This resets the sequential number

for the folder name and

le namewhenever a new card is inserted. *1 This is useful when groupingimages on separate cards.

AUTO

Even when a new card is inserted,this continues the numbering for the folder name and le name fromthe previous card. This is useful for managing all image folder namesand les names with sequentialnumbers.

*1 The number for the folder name is reset to 100, and

the one for the le name is reset to 0001.


47/83

47 EN


Adjusting the CCD and the image processing function [PIXEL MAPPING]

s (Settings 2) PIXEL MAPPING

This function has already been adjustedat factory shipping, and no adjustment isneeded right after purchase. Approximatelyonce a year is recommended.

For best results, wait at least one minuteafter taking or viewing pictures beforeperforming pixel mapping. If the camera isturned off during pixel mapping, be sure toperform it again.

To adjust the CCD and the image

processing functionPress the A button when [START](Submenu 2) is displayed.

The camera checks and adjusts the CCD and theimage processing function at the same time.

Adjusting the brightness of the monitor [ s ]

s (Settings 2) s

To adjust the monitor brightness1 Use FG to adjust the brightness whileviewing the screen, and then press theA button.

MENU OKSETBACK

s

Setting the date and time [ X ] t (Settings 3) X

Setting the date, time and time zone

(p. 14)

To select the date display order 1 Press I after setting Minute, and use

FG to select the date display order.

02 26 12 30:..2010

MENU OKSETCANCEL

X

Y M D TIME

Y/M/D Y/M/D

Date order


48/83

48 EN

Choosing home and alternate time zones [WORLD TIME] t (Settings 3) WORLD TIME

You will not be able to select a time zone using [WORLD TIME] if the camera clock has not rst been

set using [ X ].Submenu 2 Submenu 3 Application

HOME/ALTERNATEx The time in the home time zone (the time zone selected for x in

submenu 2).

y The time in the travel destination time zone (the time zone selectedfor y in submenu 2).

x *1 Select the home time zone ( x ).y *1, 2 Select the travel destination time zone ( y ).

*1 In areas where daylight saving time is in effect, use FG to turn daylight saving time ([SUMMER]) on.*2 When you select a time zone, the camera automatically calculates the time difference between the selected

zone and the home time zone ( x ) to display the time in the travel destination time zone ( y ).

Playing back images on a TV [TV OUT] t (Settings 3) TV OUT

The TV video signal system varies depending on the countries and regions. Before viewing cameraimages on your TV, select the video output according to your TVs video signal type.


VIDEO OUTNTSC Connecting the camera to a TV in North America, Taiwan, Korea,

Japan, and so on.

PAL Connecting the camera to a TV in European countries, China, andso on.

HDMI OUT480p/576p720p1080i

Set the playback format.

HDMI CONTROLOFF Operate with the camera.

ON Operate with the TV remote control.

The factory default settings differ according to the region where the camera is sold.

To play back camera images on a TV

Connection via AV cable1 Use the camera to select the same video signal system as the one of connected TV

([NTSC]/[PAL]).


49/83

49 EN


2 Connect the TV and camera.

Connect to the TV video

input jack (yellow) andaudio input jack (white).

Multi-connector

AV cable (supplied)

Connection via HDMI cable

1 On the camera, select the digital signal format that will be connected ([480p/576p]/[720p]/[1080i]).

2 Connect the TV and camera.When set to [1080i], 1080i format takes priority for HDMI output. However, if this setting does notmatch the input setting of the TV, the signal format is changed rst to 720p and then to 480p/576p.For details on changing the input setting of the TV, refer to the TVs instruction manual.

When the camera is connected to the computer or other device via USB cable, do not connect theHDMI cable to the camera.

Connect to the HDMIconnector on the TV.

HDMI miniconnector

HDMI cable (type C) (commercially available)

Open the battery/card/connector cover in the

direction of the arrow.

3 Turn on the TV, and change INPUT to VIDEO (an input jack connected to the camera).For details on changing the input source of the TV, refer to the TVs instruction manual.

4 Turn on the camera, and use HI to select the image for playback.Use an HDMI cable that matches the HDMI mini connector on the camera and the HDMI connector on the TV.

When the camera and TV are connected by both an AV cable and an HDMI cable, the HDMI cablewill take priority.

Depending on the TVs settings, the displayed images and information may become cropped.


50/83

50 EN

To operate images with the TV remote control

1 Set [HDMI CONTROL] to [ON], and turn off the camera.2 Connect the camera and TV with an HDMI cable. Connection via HDMI cable (p. 49)

3 First turn on the TV, and then turn on the camera.Operate by following the operation guide that is displayed on the TV.

With some TVs, operations cannot be performed with the TV remote control even though theoperation guide is displayed on the screen.

If operations cannot be performed with the TV remote control, set [HDMI CONTROL] to [OFF] andoperate using the camera.

Saving battery power between shots [POWER SAVE] t (Settings 3) POWER SAVE


OFF Cancels [POWER SAVE].

ONWhen the camera is not being used for approx. 10 seconds, the monitor automatically turnsoff to save battery power.

To resume standby modePress any button.

Displaying the current altitude/water depth (atmospheric/hydraulic pressure)

[MANOMETER] (STYLUS TOUGH-8010/ TOUGH-8010 only)

t (Settings 3) MANOMETER

The readings may have a margin of error depending on meteorological conditions. Use the readingsonly for your reference.


MANOMETER

OFF Cancels the manometer display.

ONDisplays the current altitude/water depth (atmospheric/hydraulicpressure) in the shooting standby mode screen. (10 m to 5,000 m)

CALIBRATE Proceed to the setting screen. See below.

m/ftm This displays in meters.

ft This displays in feet.

When set to [ON], a warning message appears in the monitor as a water depth close to 7 m (22.9 ft)is reached.


51/83

51EN


To adjust the altitude/water depth display

1 Use FG to select the current altitude/water depth, and press the A button to set.

CALIBRATE

MENU OKSETBACK

1200 m1200 m

Operating the camera by tapping the body [TAP CONTROL]

(STYLUS TOUGH-8010/ TOUGH-8010 and STYLUS TOUGH-6020/ TOUGH-6020 only)

t (Settings 3) TAP CONTROL


OFF Cancels [TAP CONTROL].

ON [TAP CONTROL] is activated.

CALIBRATE Adjusts the tap strength and intervals between multiple taps on each side of the camerabody. (top, left, right, & back)

Operating during shooting mode(Example: Flash mode)

1 Tap the right or left side of the camerabody once. Then tap the top side of thecamera once.

The ash mode selection screen is displayed.

2 Tap the right or left side of the camerabody to select a function.

3 Tap the back of the camera body twice tocon rm your selection.

14M44

PP

0.0

Date post:	06-Apr-2018
Category:	Documents
Upload:	aldy-ajah
View:	223 times
Download:	0 times

Olympus Stylus Tough 8010 6020 3000 Series

Documents