leading innovation
STANDARD TENSING SYSTEM
Springs tensing systemRope slackening contact included
Polígono Ind. de Pina de EbroSector C, p-9
50750 Pina de EbroEspaña (Spain)
(T) +34 976 165 860 (F) +34 976 165 964
Dynatech, Dynamics & Technology, S.L.
SPECIALISTS IN SAFETY COMPONENTS FOR LIFTS
STAR BIDIRECTIONAL OVERSPEED GOVERNOR FIXED ON/UNDER CAR
Tripping speed = 0,35 ÷ 2,72 m/s Rated speed=< 2,3 m/sØ pulley = 200 mm; Ø rope = 6 mmOverspeed switch. Remote tripping.UCM available. Fulfills EN 81-20/50
ON-BOARD GOVERNORS
ROLLER TENSING SYSTEM
Springs tensing systemRope slackening contact includedIdeal for installations with a reduced headroom and pit
QUASAR T-25BIDIRECTIONAL OVERSPEED GOVERNOR INTEGRATED WITHTHE SAFETY GEAR
Tripping speed = 0,3 ÷ 2,33 m/s Rated speed=< 2 m/sØ pulley = 120 mm; Ø rope = 4 mmHardened groove Overspeed switchRemote trippingUCM availableFulfills EN 81-20/50
QUASAR SVBIDIRECTIONAL OVERSPEED GOVERNOR FIXED TO THE CAR
Tripping speed = 0,3 ÷ 2,7 m/s Rated speed=< 2,18 m/sØ pulley = 120 mm; Ø rope = 4 mmHardened groove Overspeed switchRemote trippingUCM available. Fulfills EN 81-20/50
ECOELECTROMECHANICAL WEIGHING DEVICE
Silentblocks deformation measurement deviceFeeding: 12 - 32 V DC Overload relay: (NC or NO) Overload sound signal
WEIGHING DEVICES
SD-BOX PESSRAL UCM-CONTROLSAFETY DEVICE
SD-BOX detects any type of uncontrolled movement of the car (UCM) with the doors open.Power supply: • 24 VDC power supply. • Battery power supply. 12 VDC, 1,5 AhOutputs: • Safety line contact. • Control governor unlocking coil. 24 VDCFulfills EN 81-20/50 Safety category SIL 2
TENSING SYSTEMS FOR ON-BOARD GOVERNORS
UCM-ELECTRONIC DEVICES
EN 81-20 EN 81-50
It is assembled onto the T25 steering mechanism where, in turn, ASG progressive safety gear is installed
Products Range
STAR PLUSBIDIRECTIONAL OVERSPEED GOVERNOR ASSEMBLED ON/UNDER THE CAR
Tripping speed = 0,35 ÷ 2,72 m/s Rated speed=< 2,3 m/sØ pulley = 200 mm; Ø rope = 6 mmOverspeed switch. Remote tripping. Encoder (optional).UCM available. Fulfills EN 81-20/50
1027
10271027
1027
©
2017
/09
SPECIALISTS IN SAFETY COMPONENTS FOR LIFTS MORE INFO: www.dynatech-elevation.com
IN-3000 / IN-3000 G10INSTANTANEOUS SAFETY GEAR
For tripping speed 1 m/s:P+Q max. 8 mm Cold drawn guide rail = 2480 kgP+Q max. 9 mm Cold drawn guide rail = 2837 kgP+Q max. 9 mm Machined guide rail = 1855 kgP+Q max. 10 mm Cold drawn guide rail = 3364 kgGuide rail type: Cold drawn or machined and oiled or dry. FULFILLS EN 81-20/50
IN-6000INSTANTANEOUS SAFETY GEAR
For tripping speed 1 m/s:P+Q max. Cold-drawn guide rail= 6601 kgP+Q max. Machined guide rail= 5295 kgGuide rail type: Cold drawn or machined and oiled or dry.Admissible guide rail thickness: 16 mmFULFILLS EN 81-20/50
INSTANTANEOUS SAFETY GEARS
PQ-4000-UDBIDIRECTIONAL
Minimum P+Q = 2173 kg Maximum P+Q = 4023 kgMax. Trip. Speed = 2,5 m/sGuide rail type: Machined and oiled. Admissible guide rail thickness: 7 to 16 mmMinimum gripping width =25 mmFULFILLS EN 81-20/50
PQ-3400-UDBIDIRECTIONAL
Minimum P+Q = 1107 kgMaximum P+Q = 3304 kgMax. Trip. Speed = 2,5 m/sGuide rail type: Machined and dry.Admissible guide rail thickness: 7 to 16 mmMinimum gripping width =25 mmFULFILLS EN 81-20/50
PR-2500-UD V.35BIDIRECTIONAL
Minimum P+Q = 613 kgMaximum P+Q = 1955 kgMax. Trip. Speed = 2,5 m/s Guide rail type: Cold drawn or machined and oiled.Admissible guide rail thickness: 7 to 16 mmMinimum gripping width =25 mmFULFILLS EN 81-20/50
PR-2000-UDBIDIRECTIONAL
Minimum P+Q = 537 kgMaximum P+Q = 1222 kgMax. Trip. Speed = 2,0 m/sGuide rail type: Cold drawn and oiled. Admissible guide rail thickness: 5 to 16 mmMinimum gripping width =25 mmFULFILLS EN 81-20/50
PR-2500-UD V.50BIDIRECTIONAL
Minimum P+Q = 613 kgMaximum P+Q = 1955 kgMax. Trip. Speed = 2,5 m/s Guide rail type: Cold drawn or machined and oiled.Admissible guide rail thickness: 7 to 16 mmMinimum gripping width =25 mmFULFILLS EN 81-20/50
T-3 / T-2EXTENSIBLE DRIVING BAR
Distance between guides: from 600 to 3000 mm(If it is needed other distance, contact us)Safety switch (optional) T-3 Used with: PR-2500-UD V.50 PR-2000-UD PQ-3400-UD PQ-4000-UDT-2 Used with: PR-2500-UD V.35
PR-2500UNIDIRECTIONAL
Minimum P+Q = 741 kg Maximum P+Q = 1700 kg Max. Trip. Speed = 2,5 m/sGuide rail type: Cold drawn and oiled. Admissible guide rail thickness: 7 to 16 mmMinimum gripping width =25 mmFULFILLS EN 81-20/50
T-1EXTENSIBLE DRIVING BAR
Distance between guides: from 600 to 3000 mm(If it is needed other distance, contact us)Safety switch (optional) Used with: Instantaneous PR-2500
PROGRESSIVE SAFETY GEARS
T-25 / T-25 UD T-25 XL / T-25 UD XLEXTENSIBLE DRIVING BARS
Distance between guides: from 600 to 3000 mm from 600 to 2100 mm*If it is needed other distance, contact us. Safety switch (optional).
ASG-100 UD ASG-120 UD ASG-121 UDASG-221 UDASG-65 UDBIDIRECTIONAL
Permissible massMinMax Max Tandem config.
Admissible guide rail thickness
Minimum gripping width
Maximum tripping speed
FULFILLS EN 81-20/50
Cold-drawn Machined Machined Machined Cold-drawn Oiled Oiled Dry Dry Oiled
515 kg 693 kg 598 kg 754 kg 790 kg 2139 kg 4233 kg 4019 kg 3284 kg 2214 kg 4278 kg 8466 kg 8038 kg 6568 kg 4428 kg
ASG-100 ASG-120 ASG-121ASG-221ASG-65UNIDIRECTIONAL
TENSION WEIGHT 200
Rope slackening contact included. Rope Out Protection included.Protection plate included. M14 forged clips included.
TENSION WEIGHT 300
Rope slackening contact included. Rope Out Protection included.Protection plate included. M14 forged clips included.
VEGABIDIRECTIONAL OVERSPEED GOVERNOR
Tripping speed = 0,4 ÷ 2,87 m/s Rated speed=< 2,4 m/sØ pulley = 200 mm Ø rope = 6mm/6,3mm/6,5mmHardened groove (optional). Remote reset and remote tripping mechanism by electrical acting (both optional).UCM available. Fulfills EN 81-20/50
VEGA PLUSBIDIRECTIONAL OVERSPEED GOVERNOR WITH ENCODER
Encoder (optional)Same features asVEGA
COMPACT TENSING PULLEY 200
Springs tensing pulley.Casting pulley. Rope tensioner: That will make rope re-tensioning easier if required.Rope slackening contact included. Rope Out Protection included.
PROGRESSIVE SAFETY GEARS
PROGRESSIVE SAFETY GEARS WITH LATERAL DISPLACEMENT
OVERSPEED GOVERNORS
ASG-100 ASG-120 ASG-121 ASG-221 ASG-65 ASG-100 UD ASG-120 UD ASG-121 UD ASG-221 UD ASG-65 UD
7 to 16 mm
≥ 25 mm = 20 mm
2,33 m/s 3,9 m/s 2,33 m/s
QUASARBIDIRECTIONAL OVERSPEED GOVERNOR
Tripping speed = 0,3 ÷ 2,7 m/s Rated speed=< 2,18 m/sØ pulley = 120 mm Ø rope = 6 mm/6,5 mmHardened groove Overspeed switch Remote trippingUCM available. Fulfills EN 81-20/50
COMPACT TENSING PULLEY 126
Springs tensing pulley.Steel pulley. Rope tensioner: That will make rope re-tensioning easier if required.Rope slackening contact included. Rope Out Protection included.
RENORENO FIXING KIT FOR NEW OR EXISTING FRAMES
Safety Gears: The entire range of PR, PQ and ASG progressive safety gears
Governors: Quasar T-25
EN 81-20 EN 81-50
EN 81-20 EN 81-50
1027
SPRI
NGS
TENS
ING
PULL
EYS
TENSING PULLEYS
TENS
ION
WEI
GHTS
VEGA HSBIDIRECTIONAL OVERSPEED GOVERNOR
Tripping speed = 2,87 ÷ 4,2 m/sRated speed =< 3,4 m/sØ pulley = 200mm Ø rope = 6mm/6,3mm/6,5mmHardened groove (optional).Remote reset and remote tripping mechanismby electrical acting (both optional).UCM available. Fulfills EN 81-20/50
VEGA 300BIDIRECTIONAL OVERSPEED GOVERNOR
Tripping speed = 0,6 ÷ 4,2 m/sRated speed =< 3,4 m/sØ pulley = 300mm Ø rope = 6mm / 6,5mmTest groove (optional).Hardened groove (optional).Remote reset and remote tripping mechanism byelectrical acting (both optional).UCM available. Fulfills EN 81-20/50
LBDs FAMILYBIDIRECTIONAL OVERSPEED GOVERNORS
Fulfills EN 81-1; EN 81-2More info: www.dynatech-elevation.com
LBD-200
LBD-300
FIXING KIT
LINKAGES
TANDEM CONFIG.
Used with: T-25 /T-25 UD T-2 & T-3 Safety switch (optional).
1027
10271027
1027 1027
1027
1027
1027
1027
10271027
1027
1027
1027