Reduce downtime & spare flange costs with on-site repairs. Advance CNC Machining offers flange facering for 1 to 120 inch (25 to 3050 mm) diameters and circular milling from 73.5 - 199 inches (1866.9 – 5054.6 mm). Our on-site machining capabilities include facing, milling, or both.

Our on-site machines offer us the ability to reface, mill, bevel, square, counterbore, or cut end prep configurations for welding.

Our on-site flange machining can cut your costs in four ways:

- Reduces downtime- Eliminates off-site machining costs- Eliminates leak sealing procedures- Reduces stock of replacement flange

Advance CNC Machining offers prompt, responsive on-site machining services for your critical flange repair needs.

Quality on-site machining when tear-down and down-time is not an option.

See reverse side for machining capabilities.

FLANGE FACING / CIRCULAR MILLING

Contact one of our on-site specialists today: Travis Hamilton 740-207-6987 Donald Trout 513-746-0534

Contact one of our on-site specialists today: Travis Hamilton 740-207-6987 Donald Trout 513-746-0534

ID Mounting Diameters Milling Diameters Min Turning Arm Swing Diameter

Max Turning Arm Swing Diameter

CM6200 Circular Mill 78.9 - 177.2 inches (2004.1 - 4500.9 mm)

73.5 - 199 inches (1866.9 - 5054.6 mm)

135.6 inches (3444.2 mm)

197 inches (5003.8 mm)

Facing Diameters Milling Diameters ID Mounting Diameters OD Mounting Diameters

FF1000 Flange Facer 0 - 12 inches (0 - 304.8 mm) N/A N/A 2 - 12 inches

(50.8 - 304.8 mm)

FF3000 Flange Facer 1.5 - 12 inches (38.1 - 304.8 mm) N/A 1.5 - 6.75 inches

(38.1 - 171.5 mm) N/A

FF4000 Flange Facer 3 - 19 inches (76.2 - 482.6 mm) N/A 3 - 12.5 inches

(76.2 - 317.5 mm) N/A

FF5000 Flange Facer 5 - 24 inches (127 - 609.6 mm) N/A 5 - 18 inches

(88.9 - 457.2 mm) N/A

FF6200 Flange Facer 20 - 50 inches (508 - 1270 mm) N/A 20 - 50 inches

(508 - 1270 mm) up to 50 inches (up to 1270 mm)

FF7200 Flange Facer 30 - 72 inches (762 - 1828.8 mm)

35 - 72 inches (889 - 1828.8 mm)

30 - 72 inches (762 - 1828.8 mm)

56.5 - 82.7 inches (1435.1 - 2100.6 mm)

FF8200 Flange Facer 45 - 120 inches (1143 - 3048 mm)

45 - 120 inches (1143 - 3048 mm)

45 - 120 inches (1143 - 3048 mm)

89.8 - 136.4 inches (2280.9 - 3464.6 mm)

Flange Facing Capabilities:

Circular Milling Capabilities: