only - HOME | Lane Manufacturing Companylanemfg.net/assets/gaskets.pdfGASKETS Gaskets AKRON TYPE...

Toll Free (800) 410-5263 Fax (866) [email protected] www.irrigationgaskets.com

8:00 am to 4:30pm PST

This Section uses Discount A Prices effective March 15, 2020Page 64

GASKETS

Gas

kets

AKRON TYPE GASKETPart # Size Box Qty

485-20 2 50485-30 3 200485-40 4 160485-50 5485-60 6

AMES TYPE GASKETFor Ames SBS-Q and SBS-QRD - see Farmland, pg 75

For Ames FCR Type - see Oval Gate, page 81Part # Size Box Qty OD ref only

480-20 2 50 3"480-30 3 300 4-1/2"480-40 4 100 6"480-50 5 60 7-1/2"480-60 6 40 9"480-70 7

AMES TYPE SPRINGS - 'STANDARD'Part # Size OD ref only

580-20 2 2-7/8"580-30 3 4-3/8"580-40 4 5-3/4"580-50 5 7-5/16"580-60 6 8-3/4"

AMES LO-HI TYPE GASKETReplaces Ames Furrow-Flo Type

Part # Size Box Qty481-60 6 60481-70 7481-80 8 30

481-100 10 2510" Furrow-Flo is available for filter applications

481-120 12 20481-100SP 10 25used in newer lo-hi couplers, slightly smaller cross section than

original AmesAMES ABC-QS TYPE GASKET

(Suction and Discharge)Part # Size Box Qty

480-60S 6 30480-80S 8

MUSHROOM DRAIN VALVE (Slow Drain)Part # Size Box Qty

495-25 Plain 50

Irrigation parts are wholesale to dealers only



Page 65Prices effective March 15, 2020 This Section uses Discount A

GASKETS

Gaskets

VALVE OPENING ELBOW GASKET437-06 5/8” See Page 16 for Pricing437-07 3/4” See Page 16 for Pricing437-10 1” See Page 16 for Pricing

AMES GRAVEL TYPE GASKETPart # Size Box Qty

482-40G 4

AMES APL TYPE GASKET482-20 2 50482-40 4

ANDERSON-MILLER TYPE GASKET(Replaces TELEDYNE, A & M, MILLER-POSTEN, DUOLOCK)Part # Size Box Qty

DRAIN320-20 2 50320-30 3 300320-40 4 200

NON-DRAIN422-20 2 50422-30 3 250422-40 4 200422-45 4.5 150422-50 5 110422-60 6 100422-70 7 70422-80 8 75

422-100 10 50

A & M TYPE GASKET (Ringlock and Solid Set)Part # Size Box Qty

522-30 3 Solid Set 250

A & M 10” SUPER NON DRAIN(LMC innovative design for a non-drip main line)

522-100 10 50





GASKETS

Gas

kets

AULT TYPE GASKET(Use RAINMAKER for other sizes)

Part # Size Box Qty410-30 3 400

BAUER TYPE BALL & SOCKET COUPLER O-RINGSPart # Size mm/ID

436-20 2 50 / 2.44”436-30 3 76 / 3.48”436-35 3.5 89 / 4.26”436-40 4 108 / 5.20”436-50 5 127 / 133 / 5.98”436-60 6 152 / 152 / 6.69”436-80 8 194 / 8.66”

436-100 10 11.56”436-120 12 300 / 13.125”

BEN GAR TYPE GASKETPart # Size Box Qty

433-60 6433-70 7433-80 8

433-100 10

BLUE WAVE TYPE GASKETAlso fits Kroy Type plastic coupler

406-30 3 50

CAM-LOCK TYPE FLAT WASHER SEALSWashers are molded, not die-cut

Part # Size Box Qty600-05 1/2” 50600-07 3/4” 50600-10 1” 50600-12 1-1/4” 50600-15 1-1/2” 50600-20 2” 50600-25 2-1/2” 50600-30 3” 50600-40 4” 50600-60 6” 50600-80 8” 50





GASKETS

Gaskets

CERTA-SET TYPE O-RING400-27 3 X 3/16 50 Yellow PVC Coupler400-85 riser chevron

seal50

400-662 I.D. 6.625400-862 I.D. 8.625

400-1075 I.D. 10.75400-1275 I.D. 12.75

CHAMPION TYPE GASKET486-20 2 50486-21 2 50 outer lip 3/8” high486-30 3 180486-40 4 120486-50 5 90486-60 6 60486-80 8 30

CHAMPION LATCH SPRING586-00 50

CLOUDBURST TYPE GASKET458-40 4458-50 5 100458-60 6 75

COBB TYPE GASKET463-20 2 50463-30 3 200463-40 4 100

COMMETCO TYPE GASKETReplacement for ‘Commercial Metals Treating Co’ galvanized fit-

tings)Gasket fits over male end of pipe

432-20 2432-25 2-1/2432-30 3432-40 4432-50 5

CROWN AM TYPE GASKET456-20 2 50456-30 3 175456-40 4 125456-50 5 80

All sizes larger than 5” use Rain for Rent Type 457-xx





GASKETS

Double lip wheel line gasket

Gas

kets

DECOTO TYPE SEAL RINGWill fit othe style coupings - see THUNDERBIRD

Part # Size Box Qty426-06 5/8 VOE 50426-40 4 50426-50 5 50

426-50DL 5 50DIAMOND / SIMPSON / WATERGATE TYPE

GASKETAbove ground - low pressure - plastic pipe

Part # Size Box Qty484-60 6 75484-80 8 50

484-100 10 50484-120 12 35

DRAGON TYPE GASKETPart # Size Box Qty

425-30 3 200425-40 4 100425-50 5 80425-60 6 60

DRESSER TYPE PIP / OD GASKETSAlso fits ROMAC, BOLT-TITE, WATER-TIGHT and others

Part # Size Box Qty489-20 2 250489-30 3 200489-40 4 150489-50 5 125489-60 6 80489-80 8 50

489-100 10 50489-120 12 40489-140 14489-150 15 30489-18.7 18 40

DRESSER TYPE IPS GASKETS403-30 3.5 200403-40 4.5 125403-50 5.563 90403-60 6.625 60403-80 8.625 50

403-100 10.75 35403-120 12.75 30





GASKETS

Gaskets

FARMLAND - SBS-Q TYPE GASKET (Very slow drain)

Part # Size Box Qty470-20 2 50470-30 3 175470-40 4 100470-50 5 60470-60 6 50

FARMLAND SBS-QRD TYPE GASKET (Non-Drain) ‘Green Dot’

472-30 3 150472-40 4 90472-50 5 50472-60 6 40472-80 8 30

FELTON TYPE GASKET (Felco) Non-DrainPart # Size Box Qty

417-20 2 50417-30 3 300417-40 4 200417-50 5 80417-60 6 60417-70 7417-80 8 50

417-100 10 40417-120 12 40

Drain317-30 3 250317-40 4 180

FELTON TYPE OVERSIZE (Super Non-Drain)Fits Rain-for-Rent and Felton fittings for no-leak systems

517-30 3 300VALVE OPENING ELBOW GASKET

437-06 5/8

FIBERSTRONG TYPE GASKETSPart # Size Box Qty

466-80 8466-100 10466-120 12

Felton 3" - 4"

Felton 5" and larger

Drain type





GASKETS

Gas

kets

FLEX-O-SEAL TYPE GASKETPart # Size Box Qty

451-30 3 180451-40 4 120451-50 5 60451-60 6 40451-80 8 30

GHEEN TYPE GASKETReplacement for LINDSAY, MIDWEST BAND and HOOK,

COZADPart # Size Box Qty

490-20 2 50490-30 3 200490-40 4 100490-50 5 60490-60 6 50490-70 7 50490-80 8 40

490-100 10 30490-120 12 25GHEEN TYPE DRAIN GASKET (LMC Designed)390-30 3

VALVE OPENER STEM GASKET (LMC improved design)

490-06 5/8 50490-07 3/4 50490-05 4”/5” 50GHEEN TRANSITION WATER TIGHT GASKETS

490-GTG3 3490-GTG4 4490-GTG5 5490-GTG6 6490-GTG8 8

490-GTG10 10490-GTG12 12

HABCO TYPE GASKET434-50 5434-60 6434-80 8

434-100 10





GASKETS

Gaskets

4" and larger10" - heavy duty inner lip

HASTINGS TYPE GASKETLMC Designed - easier to insert male end into fitting

Part # Size Box Qty424-60 6 60424-80 8 50

424-100 10 40424-120 12 40

IRECO - STEELUME TYPE GASKETPart # Size Box Qty

442-15 1-1/2 50442-20 2 50442-30 3 180442-40 4 125442-50 5 100442-52 5-1/4442-60 6 75442-80 8 50

442-100 10 50STEELUME TYPE GASKET - OLD STYLE

441-30 3 200441-40 4 125441-50 5 90441-60 6 90

IRECO - DRAIN TYPE GASKET (GO-3D, GO-4D)342-30 3 225342-40 4 125

IRECO TYPE SOLID SET GASKET539-30 3 180

IRECO TRAIL LINE BUTTON DRAIN D-2-9395-11 100

IRECO VALVE OPENER BOTTOM GASKET445-40 4 50

IRECO TYPE VALVE OPENING GASKET437-06 5/8437-07 3/4437-10 1





GASKETS

Gas

kets

IRECO TYPE ‘O’ RING (Wheel line application)400-43 4-1/2 x 3/16 50

400-45B 4-3/4 x 3/16 50IRECO TYPE QUAD RING

404-42 4 7/16 x 3/16 50404-59 4 5/8 x 3/16 50

IRECO A E TYPE GASKET443-20 2 50443-30 3 50443-40 4 50443-50 5 50

KROY TYPE GASKETNon-Drain (Plastic and Aluminum)

468-60 6 60468-80 8 50

468-100 10 40468-120 12 40

MCDOWELL “SAG” TYPE GASKET446-10 1446-20 2 50446-30 3 180446-40 4 120446-50 5 90446-60 6 60446-70 7 special order446-80 8

446-100 10MCDOWELL SPRINGS (Gripping Coil)

546-10 1546-20 2546-30 3546-40 4546-50 5546-60 6546-70 7546-80 8497-20 McDowell GateMCDOWELL MAINLINE and RING LOCK TYPE

GASKET446-MG6 6446-MG8 8

446-MG10 10





GASKETS

Gaskets

MOORE-RANE TYPE GASKET (Non-Drain)Part # Size Box Qty

488-20 2 50488-30 3 150488-40 4 100488-50 5 75488-60 6 50488-70 7 40488-80 8 40

488-100 10 25488-120 12

MOORE-RANE NARROW TYPE GASKET388-30 3 Drain 300

MOORE-RANE CUB VOE488-16 1/2 x 1 x 1/4 50488-17 3/4 x 1-1/4 x 1/4 50488-15 1-1/4 x 1-1/2

Posilock Gasket

MOULTON TYPE GASKETPart # Size Box Qty

452-20 2 50452-30 3 250452-40 4 150452-50 5 100452-60 6 75452-70 7452-80 8

452-100 10

MOULTON OLD STYLE (thicker cross section)452-30X 3452-40X 4452-50X 5452-60X 6





GASKETS

O-RINGS ARE MEASURED

USING I.D. AND CROSS SECTION

Gas

kets

O’ RINGSPart # Size Box Qty

400-17 1-3/4X1/4 50400-20 2X3/8 50 *** See Note400-21 2X1/4 50 (2” PORT-ALUM, use 400-21)400-22 2X3/16 50400-27 3 X 3/16 50 Yellow PVC Coupler400-30 3X3/8 50 *** See Note400-31 3X3/8 50 (RAINMAKER L-4, use 400-31)400-32 3-3/8x3/8 50

400-33A 3-5/16x3/16 50400-33B 3-5/16X3/8 50400-34 3-7/32X1/4 50400-35 3-1/2X1/4 50

400-37A 3-7/8X3/16 50400-37B 4X3/16 50400-40 4X3/8 50 *** See Note400-41 4X7/16 50 (RAINMAKER A-4, use 400-41)

400-42A 4-1/8X3/8 50400-42B 4-1/4X3/16 50400-42C 4-3/8X3/16 50400-43 4-1/2X3/16 50400-44 4-1/2X1/4 50

400-45A 4-5/8X3/16 50400-45B 4-3/4X3/16 50400-45C 4-3/4X1/4 50400-46 4-3/4X1/2 50400-50 5X3/8 50 *** See Note400-51 5X3/8 50 (RAINMAKER, use 400-51)

400-52A 5X1/4 50400-52B 5-1/4X1/4 50400-54A 5-3/8X1/4 50 (SHUR-ROLL, use 400-54A)400-54B 5-1/2X1/4 50400-60 6X3/8 50 *** See Note400-61 6-1/4X1/4 50

400-65A 6-1/2X5/8 50400-65B 6-3/8X1/2 50

*** Recommended for use with FELTON, PORT-ALUM, RAIN CONTROL, SURE-RANE and other bolt-on couplers

CERTA-SET TYPE O-RING400-27 3 X 3/16 50 Yellow PVC Coupler400-85 riser chevron seal 50

400-662 I.D. 6.625400-862 I.D. 8.625

400-1075 I.D. 10.75400-1275 I.D. 12.75





GASKETS

Gaskets

OAKS TYPE GASKETPart # Size Box Qty

450-40 4 125450-50 5450-60 6 100

OLIVER TYPE GASKETPart # Size Box Qty

461-20 2 50 newer style461-30 3 225461-40 4 160461-50 5 100461-60 6 75461-70 7 50

OVAL GATE (AMES FCR Type, but improved for easier installation)

Part # Size Box Qty497-60 Complete 300497-61 Rubber Frame Only 300497-62 Slide Gate Only 300

PACIFIC SPEEDLOCK TYPE GASKET - OLD STYLE(Very first fittings used Round Back Gaskets)

Part # Size Box Qty462-20 2 50462-30 3 180462-40 4 120462-50 5 90462-60 6 75462-80 8 50

PACIFIC SPEEDLOCK TYPE GASKET - NEW STYLE464-20 2 50464-30 3 225464-40 4 150





GASKETS

Gas

kets

PIERCE TYPE GASKET and GENERIC ROUND BACK COUPLERS

Replaces AMES QCL, old style A & M, ATLAS, DECOTO, RAINWAY & TICO except 3”

Part # Size Box Qty401-13 1-5/16 50401-20 2 50401-22 2-1/4 50401-25 2-1/2 50401-30 3 200401-40 4 125401-50 5 100401-60 6 70401-70 7 60401-80 8 50401-90 9

401-100 10 30401-120 12 25

PIERCE TYPE PIVOT GASKET402-66 6-5/8 70402-80 8 50

10” use 407-100PIERCE ‘DRAIN’ TYPE GASKET

302-30 3 200302-40 4 125302-50 5 100

SIDE WHEEL ROLL400-43 4-1/2 x 3/16 50 O’ Ring

400-45B 4-3/4 x 3/16 50 O’ Ring404-45 4-1/2 x 1/4 50 Quad Ring

VALVE OPENING ELBOW GASKET437-06 5/8”437-07 3/4”437-10 1”

PIERCE TYPE ROUND BACK EPOXY UNDER-GROUND GASKETS

Part # Size Box Qty421-40 4 IPS 125421-60 6 PIP 90421-80 8 PIP 60

421-100 10 PIP 30421-120 12 PIP 25421-150 15 PIP 20





GASKETS

Gaskets

PIERCE ROUND BACK 3 LIP (Non-Drain) LMC Design

Part # Size Box Qty407-30 3 200407-40 4 125407-60 6 75407-80 8 50

407-100 10 30407-120 12 20

PORT-ALUM TYPE GASKET465-20 2 50465-30 3 200465-40 4 100

56

RACE & RACE ‘CONTRACTOR’ TYPE GASKETWill have CON 6, 7, or 8 printed on the lip - made to order

Part # Size Box Qty413-60 6413-70 7413-80 8

RACE & RACE ‘LINKLOCK’ TYPE GASKET (RACEBUILT)

415-20 2 50415-30 3 180415-40 4 150415-50 5 100415-60 6 60415-70 7 40415-80 8 35

RACE & RACE ‘DEMOUNTABLE’ TYPE GASKET414-20 2 50414-30 3414-40 4 250414-50 5 150414-60 6 120414-80 8





GASKETS

Gas

kets

2 inchRAIN CONTROL TYPE GASKET (HARDIE)Part # Size Box Qty

440-20 2 50440-30 3 150440-40 4 100440-50 5 80440-60 6 50440-80 8

RAIN FOR RENT TYPE GASKET (WOSCO, LAKE)Part # Size Box Qty

457-20 2 50457-30 3 300457-40 4 175457-50 5 100457-60 6 75457-70 7457-80 8 60

457-100 10 50457-120 12 40

FELTON TYPE OVERSIZE (Super Non-Drain)Fits Rain-for-Rent and Felton fittings for no-leak systems

517-30 3 300

RAIN FOR RENT ‘DRAIN’ TYPE GASKET357-30 3 300

VALVE OPENING ELBOW GASKET437-07 3/4” 50

TRAIL LINE BUTTON DRAIN D-2-9395-11 100

RAIN-OW TYPE GASKETPart # Size Box Qty

408-20 2 50408-30 3 300408-40 4 200

3-8 inch





GASKETS

Gaskets

RAINBOW TYPE GASKET (Normal and High Pressure)

Part # Size Box Qty418-40 4 125418-50 5 75418-60 6 50418-80 8 30

RAINMAKER TYPE GASKET (Non-Drain) (ARMCO)

409-15 1-1/2 50409-20 2 50409-30 3 300409-40 4 200409-50 5 100409-60 6 75

RAINWAY SQUARE TYPE GASKET (Non-Drain)Part # Size Box Qty

412-20 2 50412-30 3 300412-40 4 200412-50 5 150412-60 6 100412-70 7 80412-80 8 75

412-100 10 50412-120 12 50

RAINWAY SUPER NON-DRAIN (LMC Design)522-100 10 100

SQUARE O-RING W/ SEALING RIBS FOR BETWEEN MALE/FEMALE 10” COUPLER

404-100 RL 10 100

RAINWAY ROUND TYPE GASKET411-30

RAINWAY INTERNAL DRAIN TYPE GASKET (Wheel Line)

411-45 50





GASKETS

Gas

kets

RAVIT TYPE GASKETPart # Size Box Qty

419-20 2419-30 3419-40 4419-50 5419-60 6

REDI-RAIN TYPE GASKET (Non-Drain)Part # Size Box Qty

423-12 1-1/4 Trail Line 50423-20 2 50423-30 3 300423-40 4 160423-50 5 110423-60 6 80423-80 8 75

423-100 10 50423-120 12 50

REDI-RAIN TYPE GASKET (Drain)323-30 3 300

REDI-RANE wheel lines 4-bolt couplers use 4" Gasket. Spline couplers use U-Ring or Half O-Ring. See wheel line section.

REDI-RANE Valve Stems and Valve Discs are available on page 21





GASKETS

Gaskets

SHUR-RANE TYPE GASKET - NEW STYLE (N.S) (Very Slow Drain)

Part # Size Box Qty460-20 2 50460-30 3 160460-40 4 100460-50 5 75460-60 6 60460-70 7460-80 8 50

460-100 10 25460-120 12 25

SHUR-RANE TYPE GASKET (Non-Drain) (FMC Type)

454-30 3 150454-40 4 110454-50 5 80454-60 6 60454-80 8 50

SHUR-RANE TYPE GASKET - OLD STYLE (O.S.)Replacement for ROLL-RAIN and VERMEER

455-20 2 50455-30 3 160455-40 4 100455-50 5 75455-60 6 50455-70 7 40

SHUR-RANE VALVE OPENING ELBOW GASKET437-03 5/8”

SHUR-ROLL DRAIN VALVE (FMC) (Bolt hole in center)

449-03 4 & 5"O" Ring - use 400-54A





GASKETS

Gas

kets

SNAP-LOCK TYPE GASKETPart # Size

487-40 (Manufactured to order)

STOUT TYPE GASKET (Most common style)Measure male end ID of pipe for size

Replacement for ALLUME, T-L, and IRECO SPEED ROLLPart # Size Box Qty

444-20 2 200444-30 3 100444-40 4 75444-50 5 50444-60 6 36

STOUT TYPE GASKET (Very old style)447-20 2 200447-30 3 100447-40 4 75447-50 5 50447-60 6 36

STOUT SEAL RING445-20 2 50445-30 3 50445-40 4 50445-50 5 50445-60 6 50

STOUT, OLD STYLE ALUMINUM FITTING476-20 2 50476-30 3 50476-40 4 50476-50 5 50476-60 6 50

STOUT TOWLINE SEAL RING478-40 4 50478-50 5 50





GASKETS

Gaskets

STROLYTE TYPE GASKETPart # Size Box Qty

435-20 2 50435-30 3 200435-40 4 110435-50 5 100435-60 6 75

THUNDERBIRD TYPE WHEEL LINE GASKET (LMC designed)

426-40TB 4 50439-40 4 110

TRI-MATIC TYPE GASKET405-15 1-1/2405-70 7

MUSHROOM DRAIN VALVE (Fast Drain)495-15 KNOBBY

VICTAULIC TYPE GASKET (Industrial Grooved Fittings)

Part # Size Box Qty471-20 2 200471-25 2-1/2471-30 3 150471-40 4 75471-50 5471-60 6 50471-80 8 35

471-100 10 25471-120 12 20471-140 14





GASKETS

Gas

kets

WADE TYPE GASKET (Normal Slow Drain)Part # Size Box Qty

428-20 2 50428-30 3 350428-40 4 200428-50 5 150428-60 6 100428-70 7 100428-80 8 80

428-100 10 (non-drain) 75WADE POWEROLL TYPE GASKET (Fast Drain)Part # Size Box Qty

430-40 4 200430-45 4.5 200430-50 5 120WADE ‘J’ TYPE GASKET (For Bolt-on couplers)431-15 1.5431-20 2431-30 3431-40 4431-50 5

WADE OLD STYPE FLAT TYPE GASKET429-20 2429-30 3429-40 4

STAR DRAIN (0.150”)427-03HP High Pressure427-03LP Low Pressure

WEBSTER ECONOMIZER TYPE GASKETPart # Size Box Qty

416-01 3/4 50416-20 2 50416-30 3 225416-40 4 160416-50 5 100416-60 6 75416-70 7416-80 8

WEBSTER TRIGGER LOCK TYPE GASKET453-30 3453-40 4453-50 5453-60 6453-70 7453-80 8





GASKETS

Gaskets

WESTERN TYPE GASKETPart # Size Box Qty

439-20 2 50439-30 3 200439-40 4 110439-50 5 100439-60 6 75439-70 7 50439-80 8 50

439-100 10 40439-120 12 25

VALVE OPENING ELBOW GASKET437-07 See Page 16 for Pricing

WHEEL TRAC TYPE GASKETPart # Size Box Qty

467-20 2467-30 3467-40 4

WYSS TYPE GASKETReplaces CROWN, MONTGOMERY WARD, STOUTBILT ALUM

& othersPart # Size Box Qty

475-20 2 50475-30 3 200475-40 4 100475-50 5 80475-60 6 50

WYSS SEAL RING476-20 2 50476-30 3 50476-40 4 50476-50 5 50476-60 6 50

WYSS VALVE COVER497-01 4


Date post:	14-Jul-2020
Category:	Documents
Upload:	others
View:	1 times
Download:	0 times

only - HOME | Lane Manufacturing Companylanemfg.net/assets/gaskets.pdfGASKETS Gaskets AKRON TYPE...

Documents