opening doors - Argent Alu · 2020. 2. 19. · closed doors and walls constitute one whole: the...

argentaopening doors

®

argenta® invisidoor®

Invisible aluminium frame for interior doors

Content

argenta invisidoor ................................... 4

argenta invisidoor AX / AX PRO ............ 10

argenta invisidoor S .............................. 18

argenta invisidoor SD / SDX .................. 22

argenta invisiplint ................................. 30

general information ............................... 35

THE INVISIDOOR® CONCEPT

“Discrete interior doors” - thé trend for a timeless interior style with a sleek and minimalist design.

With its invisible door systems Argent Alu responds perfectly to this trend. Thanks to these systems,

closed doors and walls constitute one whole: the disturbing frames disappear, while the hinges are mounted in such a way that from the outside they

are no longer visible. Argent Alu offers an ‘invisible’ solution for revolving doors, pivoting and

sliding-in-the-wall doors.

HINGED DOORS

Thanks to an ingenious aluminium interior door frame, it is possible to achieve integrated doors in walls with a frameless appearance. With the invisidoor the door is lined up perfectly

with the wall allowing architects to create clean lines.

7argentaopening doors

®7

argentaopening doors

®


What are the benefits ?

• AESTHETICS- no visible frame around the door

- standard equipped with a primer coating

(powder coated in all RAL colours on request)

• EFFICIENT INSTALLATION- option of fitting: before or after plastering

- units are supplied with special hinge caps in the cut-outs for protection during plastering

• CAN BE APPLIED UNIVERSALLY- for all standard and non-standard door openings (new buildings and renovation)

- for standard rebated doors

- for both brickwork and gypsum board walls (metal stud and CLS frames)

• PLASTER CRACKING IS PREVENTED THANKS TO THE- sturdy frame construction (integrated corner connection)

- stable profile

- direct, sturdy and easy mounting on walls by using screws or stone anchors

- good adhesion of the plaster work against the profile thanks to the special dovetail profiling

• DIMENSIONS- doors at room height

- you can easily adjust the upper profile (width) by sawing/adjusting as needed

Dimensions regarding the door

• CLEARANCE- 2 mm between the door panel (left, right and top) and the frame

- 4 mm between the door panel (at the bottom) and the floor

• WALL OPENING- at invisidoor DL 40:

• width = width door panel + minimum 64 mm (for installation without dowels) /

minimum 74 (for installations with dowels)

• height = height door panel + minimum 36 mm

- at invisidoor DL 44/45, 50 en 54:

• width = width door panel + minimum 70 mm (for installation without dowels) / minimum 80 mm (for installation with dowels)

• height = height door panel + minimum 36 mm

• HANDLE- installation height: 1050 mm (measured from the floor)

- square hole for a spindle of 8 mm is standard (adapter for 7 mm on request)


®


Technical features


DL 40 mm DL 44/45 mm DL 50 mm DL 54 mm

Max. Door width (single door) 1250 mm

Max. Door width (double door) 2500 mm

Max. Door height 4000 mm

Max. Door Thickness 38 - 40 mm 44/45 mm 50 mm 54 mm

Min. wall thickness (for brickwork and walls with minimum wall thickness of)

70 mm 80 mm

Fire resistant version (according to EN 1634-1) EI130, EI230, EW30, E30

What is included in an argenta invisidoor DL?


DL 40 mm DL 44/45 mm DL 50 mm DL 54 mm

Hinges Invisible neo S-5 (optional neo M-6) Invisible neo M-6 (optional neo L-7)

Integrated seal absorbing door closing impact

Standard: whiteOn demand: gray or black

Lock Standard: - AGB Magnetic lock Standard: grey On demand: black

On demand:- AGB Magnetic cylinder lock- AGB Magnetic bathroom- and toilet lock- Magnotica Pro, magnetic closing system (without lock)- KFV magnetic lock- KFV magnetic cylinder lock- KFV magnetic bathroom- and toilet lock- Litto Multipoint lock type T1781 (only milling)- Smart Entrance, invisible electromagnetic lock- Smart Entrance invisible electromagnetic bathroom- and toilet lock- Invisible No-Ha lock- Invisible No-Ha bathroom- and toilet lock

Finishing Standard equipped with a primer coating (powder coated in all RAL colours on request)

Invisible hingesWhen choosing an argenta invisible neo hinge in combination with an argenta invisidoor DL it is important to keep the door weight in mind and the desired color.

Invisible neo S-5

Invisible neo M-6

Invisible neo L-7

Finishing Matt chrome, Glossy chrome, Stainless steel look, Tar black, Black umber, Bronze, Dark bronze, Classic bronze, Polished brass (CU), Copper**

Door weight (2 pc) up to* 60 kg 80 kg 100 kg

Door weight (3 pc) up to* 80 kg 100 kg 150 kg

Technical characteristics - 3D adjustable (height, depth, and pressure)- No visible screws- Easy-Hook, installation and 3D adjustable by one person- Height adjustment without wedge- Pure and qualitative design

* Based on a reference door of 1000 x 2000 mm** See page 27

PIVOTING DOORS

Another perfect solution by Argent Alu who developed a pivotating doorsystem based on the invisidoor technology

Never losing the austere design and maintaining that timeless, streamlined look.


®

argenta® invisidoor® AX / AX Pro

argenta® invisidoor® AXInvisible aluminium frame for pivoting internal doors till 45 kg

The argenta invisidoor AX is an invisible aluminium frame for pivoting internal doors that can be easily, quickly and invisibly installed and plastered-in. Thanks to this innovative concept, the installation of pivoting doors becomes child’s play; the frame with integrated pivot system can be installed very easily and no system needs to be built into the floor.

The argenta invisidoor AX is extremely suitable for use as a door to a walk-in wardrobe or as a door between the kitchen and living room. The door can be pushed open quickly and easily in both directions, without a handle.

argenta® invisidoor® AX ProInvisible aluminium frame for pivoting internal doors till 100 kg

The argenta invisidoor AX PRO is the latest addition to the argenta invisidoor range. It is an invisible aluminum frame for pivoting doors up to 100 kg, ideal for heavier and frequently used applications. Because the pivot system is placed in the argenta invisidoor AX PRO can be used in both new construction and renovation and it is suitable for floors with underfloor heating. The door can be opened in both directions and has a holding position at 90°. Due to the active dampers, the door always closes perfectly to zero so it remains in line with the wall. This keeps the sleek design of the wall guaranteed.

Finally the argenta invisidoor AX PRO meets to the EN 1154 standard for door closers.

PATENTED TECHNOLOGY

PATENTED TECHNOLOGY


®



• AESTHETICS

- no visible frame around the door

- easy and hidden door assembly due to patented upper pivot system.

- virtually invisible pivot system

- generally supplied with paintable primer (other colours on request)

• EFFICIENT INSTALLATION- quick and effortless installation of the door and the frame

- the door position doesn’t need to be adjusted

- for brickwork and walls with minimum wall thickness of 70 mm

• CAN BE APPLIED UNIVERSALLY- for all standard and non-standard door openings (new buildings and renovation)

- for both brickwork and gypsum board walls (metal stud and CLS frames)


- stable profile

- direct, sturdy and easy mounting on the walls by using screws or stone anchors

- good adhesion of the plaster work against the profile thanks to the special dovetail profiling

• DIMENSIONS- wide range of dimensions

- doors at room height


• CLEARANCE- argenta invisidoor AX

• 7 mm between the door leaf (hinge side of the door) and the door frame

• 3 mm between the door leaf (lock side of the door) and the door frame

• 4 mm between the door leaf (top of the door) and the door frame

• 5 mm between the door leaf (bottom of the door) and the door frame

- argenta invisidoor AX Pro• 6 mm between the door leaf (hinge side of the door) and the door frame

• 3 mm between the door leaf (lock side of the door) and the door frame

• 4 mm between the door leaf (top of the door) and the door frame

• 13 mm between the door leaf (bottom of the door) and the door frame

• WALL OPENING- argenta invisidoor AX

• Width wall opening = width door panel + min. 70 mm (installation without dowels)

min. 74 mm (installation with dowels)

• Height wall opening = height door panel + min. 39 mm (installation without dowels)


- argenta invisidoor AX Pro• Width wall opening = width door panel + min. 70 mm (installation without dowels)


• Height wall opening = height door panel + min. 45 mm (installation without dowels)



®


Technical features


AX AX Pro

Max. Door weight 45 kg 100 kg

Max. Door width 1000 mm 1000 mm

Max. Door height 3000 mm 3000 mm

Min. Door thickness 38 - 40 mm 40 mm

What is included in an argenta invisidoor AX/ AX Pro?


AX AX Pro

Pivoting door system argenta pivotica argenta pivotica Pro 100 F90

LockStandard:- Magnotica, magnetic closing sysytem(without lock)

Standard:- Without lock

EPB norm (BE) Only through additional floor plate

(clearance of 5 mm up to 9 mm)

Meets standard (13 mm clearance between the floor and the door)

EN1154 - Meets the EN1154 standard

POCKET DOORS

Sliding door systems are being applied to utilize the available space at its finest. Thanks to the Argent Alu sliding door

systems, based on the invisidoor concept, maintaining that timeless and streamlined look.


®

argenta® invisidoor® S

argenta® invisidoor® SThe invisible aluminium frame for flush-mounted sliding-in-the-wall doors.

When the door is closed, the Invisidoor S door leaf aligns perfectly with the same plane as the wall into which the system is integrated. This means that the door is completely invisible, which makes even a handle superfluous.

When the door is open, the door leaf disappears into the wall completely. When you want to close the door again, the door leaf appears out of the wall to slide nicely into the same plane as the front of the wall. The wall opening is closed off nicely by a moving cover profile.

Thanks to the integrated auto-eject, the door can slide into the wall completely and still remain accessible. With a slight push on the side of the door leaf, it emerges to be moved further into a closed position.

Invisidoor S thus represents a minimalist sliding door integrated into the wall, both when open and closed! This beautiful finish is also combined with a sublime operation. The refined finish of this door system does not stand in the way of its perfect operation: Invisidoor S is equipped as standard with a softclose system to close the door softly and independently.

The product has also been designed in such a way that the door leaf remains easily adjustable. Even when everything is finished, the rollers, softclose, and auto-eject can always be disassembled without damaging the wall.

Why choose the argenta invisidoor S ?• Best of both worlds: closes like a revolving door and saves space like

a door that slides into the wall

• A complete solution

• Quick and easy installation


®

What are the benefits?

• AESTHETICS - When closed, the door melds seamlessly into the wall.

- 100% free passage because the door slides into the wall completely


- paintable primer coating as standard

- opening in wall is closed by a moving cover profile

- door closes softly and independently and is finally ‘trapped’ in a TPE seal

- an auto-eject is a pleasant way to hide the door away and still make it accessible

• EFFICIENT INSTALLATION- finishing with double plasterboard panels is possible (only with a wall thickness of 125 mm)

• CAN BE APPLIED UNIVERSALLY- the back of the wall can be adapted to any wall thickness.

• PLASTER CRACKING IS PREVENTED THANKS TO THE- solid construction framework (integrated corner connection)

- stable profile

- solid and easy wall mounting using screws

- special dovetail profiling for good PUR and plaster adhesion


• DIMENSIONS- clear height = door height + 14 mm

- clear width = door width - 15 mm

• CLEARANCE AT THE BOTTOM- front: 13 mm

- back: 7 mm

• SPACING- 2 mm to the top

- 3 mm to the bottom

Setup

• LEFT DOOR

• RIGHT DOOR



®

Technical features


Standard door widths 830 - 930 - 1030 mm

Standard door heights 2015 - 2040 - 2115 - 2140 - 2315 mm

Door thickness 40 mm

Max. door weight 40 kg

Min. wall thickness (both masonry and walls with minimum thickness of)

125 mm

What is included in an argenta invisidoor S?


Frame Aluminium frame with a running profile and steel reinforcement profiles

Even system Scissor system combined with trolleys and a guiding system

Cover profiles Cover profiles to close the back of a scissor system, the guiding system, and the opening in the wall

Sliding door fitting sets

- Softclose damper- Auto-eject- White integrated impact seal- White Magnotica Pro

Finish Made as standard with a primer that can be painted over

• MINIMUM RECESSED DIMENSIONS- Invsidoor S W = (width of door panel x 2) + 190 mm H = height of door panel + 126 mm

• COLOURS- Running profile: black anodisation- Post profiles at the door opening: white primer- Cover profile at the top of the door: white primer- Cover profile at the bottom of the door: white primer



®

argenta® invisidoor® SD / SDX

argenta® invisidoor® SDInvisible aluminium frame for pocket doors

Thanks to the argenta invisidoor SD, an invisible aluminium frame for interior pocket doors, you can now keep the austere design of the invisidoor range for your sliding doors, maintaining that timeless, streamlined look. Furthermore thanks to the argenta proslide sliding door system, doors can be applied up to 100 kg in weight.

The special ESSI module delivered with the door makes it easy to install and remove the upper profile with all of its components. Due to the Manual-Fix fixing system, wich is delivered with argenta invisidoor SD, there is the smallest possible amount of space (up to 5 mm) between the door panel and the upper profile. As an interior designer you need to integrate the frame in the wall.

argenta® invisidoor® SDXInvisible aluminium frame for pocket doors

The argenta invisidoor SDX is a total solution with an invisible aluminium frame for interior pocket doors. With this solution, the austere design of the invisidoor range can be implemented for your sliding doors, maintaining that timeless, streamlined look. Thanks to the argenta proslide sliding door system, doors can be applied up to 100 kg in weight. The removable upper profile makes it easy and fast to install and remove the trolley systems and stops.

The fittings can be attached to the door using the Manual-Fix. This allows you to create the smallest possible amount of space (up to 5 mm) between the door panel and the upper profile, resulting in a streamlined result. But even this spacing can be hidden using the optional cover profile. But even this minor spacing can be hidden using the optional cover profile.

Why choose for the argenta invisidoor SDX?• Complete solution

• Fast and easy installation

• Removable upper profile


®

What are the benefits?

• AESTHETICS- 100% free passage because the door completely slides into the wall


- standard equipped with a primer coating

(powder coated in all RAL colors on request)

- minimum spacing of 5 mm between the top of the door panel and the frame

• EFFICIENT INSTALLATION- installation of frame and door at the same time

- can be finished with double plasterboard (only for a wall thickness of 125 mm)

• CAN BE APPLIED UNIVERSALLY- can be used for door thicknesses of 38 to 45 mm

- can be used with any type of hook lock


- stable profile

- direct, sturdy and easy mounting on walls using screws or stone anchors

- good adhesion of the plaster work against the profile thanks to special dovetail profiling

• DIMENSIONS- wide range of dimensions

- made-to-measure


• SLOW STOPS- min. door width for a single Slow Stop = 730 mm

- min. door width for a single Slow Stop Small = 880 mm

- min. door width for two Slow Stops = 930 mm

• CLEARANCE- min. 5 mm up to max. 10 mm between the bottom of the door leaf and the floor

• MINIMUM BUILT-IN DIMENSIONS- type SD

W = (width doorpanel x 2) + 17 mm

H = height doorpanel + 60 mm

- type SDX

W = (width doorpanel x 2) + 17 mm

H = height doorpanel + 65 mm



®

Technical features


SD100 SD125 SDX100 SDX125

Max. Wall thickness 100 mm 125 mm 100 mm 125 mm

Max. Door height 2140 mm 3000 mm 2140 mm 3000 mm

Max. Door weight 100 kg 100 kg 100 kg 100 kg

Max. Door width Depending on the door height*

Door Thickness 38 – 45 mm 38 – 45 mm 38 – 45 mm 38 – 45 mm

* Ask our calculation table for more information

What is included in an argenta invisidoor SD/X?


SD SDX

Frame Standard invisidoor frame

Sliding door hardware - Argenta proslide upper profile- 3 connecting brackets

- Removable argenta proslide upper profile- 3 connecting brackets- 2 intermediate profiles*- Unique connecting profile

Sliding Fitting - Argenta Proslide Manual-Fix fixing system- One Slow Stop damper and

one adjustable stop- Integrated floor guide- Removable, acoustic TPE seal- ESSI module: 50 mm

- Argenta Proslide Manual-Fix fixing system- One Slow Stop damper and

one adjustable stop- Integrated floor guide- Removable, acoustic TPE seal

Lock Profile Aplplicable with or without lock profile

Finishing Finished with an epoxy primer, making it easy to paint the frame

Options Lock plate Standard: - CoverplateOn demand:- Magnetic closing system ‘Magnotica Pro’- Lock plate for hook locks- No milling- Argenta Proslide Auto-Fix fixing system- 2 single Slow Stop damper or 1 double

Slow Stop damper- Reinforced floor’s profile

Accessories - Brush seal- Floor guide for the door- Recessed door profile for easy fixing

of the Manual-Fix- Design argenta C handle

- Brush seal- Floor guide for the door- Recessed door profile for easy fixing

of the Manual- or Auto-Fix- Design handle by Argenta- Snap-on cover profile- Selfclose- Push & Go

* Depending on the wall thickness, we advice you to install extra intermediate profiles



®


®

argenta® invisidoor® SDX - Corner

Technical specifications


SDX Corner

Max. wall thickness 125 mm

Max. door height 3000 mm

Max. door weight 100 kg (per door)

Max. door width 1500 mm

Door thickness 38 – 45 mm

What is included in an argenta invisidoor SDX Corner?


SDX Corner

Frame Invisidoor SDX door frame in corner set-up

Sliding door profile - Removable argenta proslide top profile- 5 connector brackets- 2 end profiles- Unique connector profile

Sliding door accessories

- Argenta Proslide Manual-Fix mounting- One slow stop shock absorber and one adjustable stop- Integrated base plate- Removable, acoustic TPE seals

Finish Supplied with primer that can be painted over as standard

Options Standard:- Cover plate Upon request:- ‘Magnotica’ magnetic closing system- Lock plate for hook lock- No milling- Argenta Proslide Auto-Fix fixing system- 2 single Slow Stop or 1 single Slow Stop Small- Reinforced floor’s profile

Accessories - Sealing brushes- Bottom guide profile for the door- Recessed door profile for simple mounting of the Manual-Fix or Auto-Fix- Designer door handle- Click-on cover profile- Push & Go- Reinforced floor’s profile

• MINIMUM RECESSED DIMENSIONS- Door A recessed length: B = (width of door panel x 2) + 31 mm

- Door A recessed height: H = door panel height + 65 mm

- Door B recessed length: B = (width of door panel x 2) + 31 mm

- Door B recessed height: H = door panel height + 65 mm

• FREE PASSAGE- Free passage = √ ((door leaf A-30)²+(door leaf B+10)²)

- In case door leaf A is in front of door leaf B.

LEFT RIGHT


®


®

Technical specifications


SDX Glass

Max. wall thickness 125 mm

Max. glass panel height 3000 mm

Max. glass panel weight 100 kg

Max. glass panel width Depends on the door height and door weight*

Glass thickness 8 mm, 10 mm & 12 mm

* Ask our calculation table for more information

What is included in an argenta invisidoor SDX Glass?


SDX Glass

Frame Standard invisidoor SDX door frame

Sliding door profile - Removable argenta proslide top profile- 3 connector brackets- 2 split profiles- Unique connector profile

Sliding door accessories

- Argenta Proslide Glass-Fix mounting with two glass clamps based on the glass thickness

- One single Slow Stop and one Standard Stop*- Integrated base plate- Removable, acoustic TPE seals

Finish Supplied with primer that can be painted over as standard

Options 2 single Slow Stops or 1 single Slow Stop Small

Accessories - Rubber seals- Sliding cover profile with end cap

* Argent Alu advises, if the panel width is wide enough, to switch the accessosries to 2 Single Slow-stops or 1 single Slow Stop Small

• SLOW STOPS*- min. door width for a single Slow Stop = 730 mm

- min. door width for a single Slow Stop Small = 950 mm

- min. door width for two Slow Stops = 1030 mm

* The glass clamps must each be fixed at 28.5 mm from the side of the glass door

• RECESSED DIMENSIONS- type SD Glass

Recessed length: B = (width of glass panel x 2) + 17 mm

Recessed height: H = height of glass panel + 86 mm

- type SDX Glass

Recessed length: B = (width of glass panel x 2) + 17 mm

Recessed height: H = height of glass panel + 91 mm

argenta® invisidoor® SDX - Glass


®


®

INVISIBLE SKIRTING BOARDS

In a modern and minimalistic architecture, unimpaired purity prevails in all its aspects. So door frames have been gone

for some time now. And hinges and architraves are no longer visible. Skirting boards remained the only obstacle to a

perfectly flat wall. Through the invisiplint, “invisible skirting boards”, you now have the perfect solution for this problem. These invisible skirting boards (available in 2 models: a thin adhesive board and a recessed board) allow you to achieve the sleek and minimalistic design that your home deserves.


®


®

argenta® invisiplint


• AESTHETICS - virtually invisible skirting boards

- generally supplied with paintable primer (other colours on request)

- can perfectly be combined with the invisidoor range to give an entire room the minimalistic look and feel that you strive for

• CAN BE APPLIED UNIVERSALLY- when used with the invisidoor type OUT, the door with the invisiplint can be opened up to 180°, something

that is not possible with a classic skirting board.

- when used with the invisidoor type IN, it is impossible to use a classic skirting board. But with the invisiplint this no longers forms an issue and there is also no risk of bumping the door up to concealed skirting board.

Technical features

argenta® invisiplint

Type Thin adhesive skirting board (type 1) Recessed skirting board (type 2)

Max. Length 3000 mm

Accessories For connection with invisidoor:- End piece, inner and outer conner for invisidoor DL40- End piece, inner and outer conner for invisidoor DL44/45- End piece, inner and outer conner for invisidoor DL50

Thin adhesive skirting board (type 1) Recessed skirting board (type 2) Recessed skirting board (type 2) with finishing skirting board in the same material as the floor


®

• TYPE OF DOOR By default it concerns ‘single’ doors, but also ‘double’ doors as well as ‘room high’ doors, both single and

double are possible. For room-high doors no upper horizontal profiles should be ordered. When ordering, it should be indicated that it concerns room-high doors. Also, a four-sided frame is possible for ‘single’ tube doors. In this case two horizontal upper profiles need to be ordered (one for on top and one for at the bottom of the frame). When ordering, it should be indicated that it concerns tube doors. Both room-high, tube doors as double doors are ‘made-to-measure’.

• IN or OUT and LEFT or RIGHT

• INVISIBLE NEO FINISHES

How to define a door ?

EN left IN EN right IN

EN left OUT EN right OUT

Tar black Copper Matt chrome Bronze

Dark bronze Stainless steel look Glossy chrome Polished brass (CU)

Black umber WhiteClassic bronze

Follow us on:

nv Argent Alu sa | Ter Vlucht 2, 8850 Ardooie - Belgiumheadquarters | Bankstraat 2, 9770 Kruisem - Belgium

T +32 (0)51 74 04 20 | [email protected] | www.argentalu.comargentaopening doors

®

© L

2002

006

03/

19 E

nglis

h

Argent Alu: THE reference for opening doors

Founded in 1909, Argenta Alu nv– more commonly known

by the brand name argenta® – has been developing and

producing hinges for interior doors for over 100 years.

Argent Alu can offer you a wide range of door hardware

thanks to a persistent vertical integration. Besides its

own development division and test laboratory Argent Alu

also manages other processes in-house such as: mold

manufacturing, plastic injection molding, production,

aluminium processing, anodization, powder coating and

assembly. Our local sales teams assist our distributors

where possible and follow market developments closely.

Our wide selection of products includes:

- Concealed hinges invisible

- Invisible door frame invisidoor

- Hinges in all sizes, colours and models

(both modern and country style)

- Indoor sliding door fittings argenta slide for wooden and

glass doors

- A wide selection of window and shutter fittings

*L2002006*

Date post:	17-Aug-2020
Category:	Documents
Upload:	others
View:	1 times
Download:	0 times

opening doors - Argent Alu · 2020. 2. 19. · closed doors and walls constitute one whole: the...

Documents