Operating and installation instructions Built-in coffee ... · Green coffee beans are very hard and...

Operating and installation instructionsBuilt-in coffee machine

To avoid the risk of accidents or damage to the appliance, it is essentialto read these instructions before it is installed and used for the first time.

en – AU, NZ M.-Nr. 11 201 430

Caring for the environment

2

Disposal of the packingmaterialThe transport and protective packaginghas been selected from materials whichare environmentally friendly fordisposal, and can normally be recycled.

Recycling the packaging reduces theuse of raw materials in themanufacturing process and alsoreduces the amount of waste in landfillsites. Ensure that any plasticwrappings, bags etc. are disposed ofsafely and kept out of the reach ofbabies and young children. Danger ofsuffocation.

Disposing of your oldapplianceElectrical and electronic appliancesoften contain valuable materials. Theyalso contain specific materials,compounds and components, whichwere essential for their correct functionand safety. These could be hazardousto human health and to the environmentif disposed of with your domestic wasteor if handled incorrectly. Please do not,therefore, dispose of your old appliancewith your household waste.

Please dispose of it at your localcommunity waste collection / recyclingcentre for electrical and electronicappliances. You are also responsible fordeleting any personal data that may bestored on the appliance prior todisposal. Please ensure that your oldappliance poses no risk to childrenwhile being stored prior to disposal.

Contents

3

Caring for the environment .................................................................................. 2

Warning and Safety instructions .......................................................................... 6

Guide to the appliance ....................................................................................... 15

Controls and indicators ...................................................................................... 17

Operating principles............................................................................................ 19Symbols in the display .......................................................................................... 21

Miele@home......................................................................................................... 22

Before using for the first time ............................................................................ 23Before using for the first time................................................................................ 23Switching on for the first time ............................................................................... 23

Filling the coffee bean container ....................................................................... 25

Filling the water container .................................................................................. 26

Switching on and off ........................................................................................... 27

Spout adjustment ................................................................................................ 28

Making drinks ...................................................................................................... 29Making coffee drinks with and without milk.......................................................... 29Preparing hot milk ................................................................................................. 30Making a coffee drink............................................................................................ 31Cancelling preparation .......................................................................................... 31DoubleShot............................................................................................................ 31Making 2 portions ( sensor)............................................................................... 31Coffee pot.............................................................................................................. 32Tea......................................................................................................................... 33

TeaTimer........................................................................................................... 34Making tea........................................................................................................ 34Teapot............................................................................................................... 35

Preparing warm and hot water .............................................................................. 35

Expert mode......................................................................................................... 36

Grinder setting ..................................................................................................... 37

Parameters........................................................................................................... 38Displaying and changing parameters.................................................................... 38Portion size............................................................................................................ 38Amount of coffee................................................................................................... 39

Contents

4

Brewing temperature ............................................................................................. 39Pre-brewing ground coffee.................................................................................... 39

User profiles......................................................................................................... 40Creating a profile ................................................................................................... 40Changing drinks in a profile................................................................................... 40Preparing User profile drinks................................................................................. 40Processing profiles ................................................................................................ 40

Setting change of profile .................................................................................. 40Changing a name ............................................................................................. 41Deleting a profile .............................................................................................. 41

MobileStart........................................................................................................... 42

Settings ................................................................................................................ 43Displaying and changing Settings......................................................................... 43Language............................................................................................................... 43Time of day............................................................................................................ 43Date ....................................................................................................................... 43Timer ..................................................................................................................... 43

Switch on at ..................................................................................................... 43Switch off at ..................................................................................................... 44Switch off after ................................................................................................. 44

TeaTimer................................................................................................................ 44Volume................................................................................................................... 44Display brightness................................................................................................. 44Lighting.................................................................................................................. 44Info (display information) ....................................................................................... 44Altitude .................................................................................................................. 44Performance mode................................................................................................ 44

Eco mode ......................................................................................................... 45Barista mode .................................................................................................... 45Latte mode ....................................................................................................... 45Party mode ....................................................................................................... 45

Water hardness ..................................................................................................... 45System lock ...................................................................................................... 46Miele@home.......................................................................................................... 47Remote control...................................................................................................... 47RemoteUpdate ...................................................................................................... 47Software version.................................................................................................... 48Showroom programme (Demo mode) ................................................................... 48Factory default settings ......................................................................................... 48

Contents

5

Cleaning and care ............................................................................................... 49Cleaning intervals - Quick guide ........................................................................... 49Cleaning by hand or in the dishwasher ................................................................. 50Unsuitable cleaning agents ................................................................................... 51Cleaning the drip tray and waste container........................................................... 53Cleaning the drip tray cover .................................................................................. 55Cleaning the water container ................................................................................ 55Cleaning the central spout .................................................................................... 55Cleaning the cup rim sensor ................................................................................. 57Cleaning the milk flask with lid .............................................................................. 58Cleaning the milk valve.......................................................................................... 59Cleaning the bean containers................................................................................ 59Cleaning the interior, the inside of the appliance door and the drip catcher ........ 60Cleaning the appliance front ................................................................................. 61Maintenance programmes..................................................................................... 61Rinsing the appliance............................................................................................ 61Rinsing the milk pipework ..................................................................................... 61Degreasing the brew unit and cleaning the interior............................................... 62Descaling the appliance ........................................................................................ 65

Problem solving guide ........................................................................................ 67Messages in the display........................................................................................ 67Unusual performance of the coffee machine ........................................................ 70Unsatisfactory results............................................................................................ 72Cleaning the milk valve.......................................................................................... 74

After sales service and warranty ....................................................................... 77

Accessories ......................................................................................................... 78

Installation............................................................................................................ 79Electrical connection ............................................................................................. 79Building-in dimensions.......................................................................................... 80Building in the coffee machine .............................................................................. 82Door opening limiters ............................................................................................ 83

Warning and Safety instructions

6

This coffee machine complies with all current local and nationalsafety requirements. However, inappropriate use can lead topersonal injury and damage to property.

Read the Operating instructions carefully before using the coffeemachine. They contain important information on the safety,installation, use and maintenance of the appliance. Familiarity withthese instructions will help to prevent personal injury and damageto property.In accordance with standard IEC 60335-1, Miele expressly andstrongly advises that you read and follow the instructions in“Installation”, as well as in the “Warning and Safety instructions”.Miele cannot be held liable for damage caused by non-compliancewith these instructions.

Keep these instructions in a safe place and pass them on to anyfuture owner.


7

Correct application

The coffee machine is intended for use in private households.

The coffee machine is not suitable for outdoor use.

This coffee machine must not be used at altitudes above 2,000 m.

The machine is intended only for the preparation of drinks such asespresso, cappuccino, latte macchiato, tea etc. Any other usage is at the owner's risk.

This appliance is not intended for use by persons (includingchildren) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning its use by a person responsible for their safety, and are able to recognise the dangers of misuse.


8

Safety with children

Danger of burning and scalding on the dispensing spouts.Children's skin is far more sensitive to high temperatures than thatof adults.

Ensure children do not touch hot surfaces of the coffee machine orplace parts of their body under the dispensing spouts.

Install the coffee machine out of reach of children.

Young children must not be allowed to use this appliance.

Older children may only use the coffee machine if its operationhas been clearly explained to them and they are able to use it safely. They must be aware of the potential dangers caused by incorrectoperation.

Children should be supervised when they are near the coffeemachine. Do not allow them to play with it or to use the controls.

Young children must not be allowed to clean the coffee machine.Cleaning may only be carried out by older children under thesupervision of an adult.

Remember that coffee and espresso are not suitable drinks forchildren.

Danger of suffocation! Whilst playing, children may becomeentangled in packaging material (such as plastic wrapping) or pull itover their head with the risk of suffocation. Keep packaging materialaway from children.


9

Technical safety

Repairs and installation work by unqualified persons could bedangerous. The manufacturer cannot be held liable for unauthorisedwork. Installation work and repairs to electrical appliances must onlybe carried out by a Miele approved service technician.

A damaged appliance is dangerous. Check it for any visibledamage. Never install or attempt to use a damaged appliance.

Before connecting the appliance to the mains supply, make surethat the rating on the data plate corresponds to the voltage andfrequency of the household supply. This data must correspond inorder to avoid the risk of damage to the appliance. Consult aqualified electrician if in any doubt.

The electrical safety of this appliance can only be guaranteedwhen continuity is complete between it and an effective earthingsystem. It is most important that this basic safety requirement ispresent and tested regularly and, where there is any doubt, thehousehold wiring system should be inspected by a qualifiedelectrician.

Reliable and safe operation of the coffee machine can only beguaranteed if it is connected to the mains electrical supply.

Do not connect the machine to the mains electricity supply by amulti-socket adapter or an extension lead. These do not guaranteethe safety of the appliance (e.g. danger of overheating).

This appliance must not be installed and operated in mobileinstallations (e.g. on a ship).

For safety reasons, this appliance may only be used when it hasbeen built in.

If the coffee machine is to be built in above another appliance,there must be a full-width, closed shelf between them (except incombination with a built-in warming drawer).


10

Only use the coffee machine in rooms where the ambienttemperature is between +16 °C and +38 °C.

A minimum installation height of 850 mm must be maintained.

This coffee machine must not be installed behind a closedfurniture door. Heat and moisture can build up behind the closedfurniture door. This can result in damage to the appliance and/orfurniture unit.

Before any repair work is carried out, the appliance must becompletely disconnected from the electricity supply.The appliance is only completely isolated from the electricity supplywhen:

– it is switched off at the circuit breaker, or

– the mains connection cable is disconnected from the powersupply.Pull the plug, not the cord, to disconnect the appliance from thepower supply.

The manufacturer's warranty will be invalidated if the appliance isnot repaired by a Miele approved service technician.

Miele can only guarantee the safety of the appliance when originalMiele spare parts are used. Faulty components must only bereplaced by original Miele spare parts.

Never open the outer casing of the machine. Tampering withelectrical connections or components and mechanical parts is highlydangerous to the user and can cause operational faults or electricshock.

Only use original Miele accessories. If other parts are used,warranty, performance and/or product liability claims will beinvalidated.


11

Correct use

Danger of burning and scalding on the dispensing spouts.The liquids and steam dispensed are very hot.

Keep well away from the area underneath the spouts when hotliquids and steam are being dispensed.

Do not touch hot components.

Hot liquid or steam could spatter from the spouts. Ensure that thecentral spout is clean and fitted correctly.

If there is a cup or container underneath the central spout, makesure that you remove this before opening the appliance door.

Water in the drip tray can also be very hot. Take care whenemptying it.

Risk of injury to the eyes!

Never look directly at the lighting or use optical instruments(magnifying glass or similar) to look at it.

Please note the following regarding water:

– The water quality must conform to the requirements for drinkingwater in the country in which the coffee machine is being used.

– Only use cold, fresh tap water to fill the water container. Hot orwarm water or other liquids can damage the coffee machine.

– Change the water every day to prevent a build-up of bacteria.

– Do not use carbonated water.

Only put roasted coffee beans in the bean container. Do not putcoffee beans containing additives or ground coffee in the beancontainers.

Do not fill the bean container with any type of liquid.


12

Do not use green (unroasted) coffee beans or mixtures of coffeebeans which contain green coffee beans. Green coffee beans arevery hard and still contain residual moisture. These can damage thecoffee machine grinder as soon as grinding begins.

Do not use coffee beans which have been treated with caramel,sugar or other substances. Sugar will damage the coffee machine.

Only use milk without additives. Additives in milk usually containsugar and this will stick to the milk pipework.

If using cow's milk, only use pasteurised milk to prevent a build-up of bacteria in the appliance.

When making tea, please follow the instructions on the packaging.

Do not place flaming alcohol mixtures underneath the centralspout. The flames could ignite plastic components and cause themto melt.

Do not swing from or hang anything on the appliance door when itis open as this could damage the hinges on the coffee machine.

The machine must not be used for cleaning objects.


13

Cleaning and care

Clean the coffee machine and the milk flask daily, particularlybefore using for the first time.

All parts of the milk system need to be cleaned thoroughly andregularly. Milk contains bacteria which proliferate rapidly withinadequate cleaning.

Descale the coffee machine regularly depending on the waterhardness level in your area. Descale the machine more frequently inareas with very hard water. Miele cannot be held liable for damagearising from insufficient descaling, the use of incorrect descalingagents or the use of a descaling agent which is not of theappropriate concentration.

Degrease the brew unit regularly with Miele cleaning tablets.Depending on the natural oil content of the coffee used, the brewunit can become blocked quite quickly.

Do not clean the machine with a steam cleaner or immerse it inwater as this will damage the machine. Steam or water could reachthe electrical components and cause a short circuit.

Used coffee grounds should be disposed of with the organicrubbish or on the compost heap. Do not empty them down the sink,as they could block it.


14

The following applies to appliances with stainless steelsurfaces:

Do not adhere stickers, adhesive tape or any other adhesivematerials to stainless steel surfaces. The coating on the stainlesssteel surfaces will become damaged and lose its protectiveproperties against soiling.

Stainless steel scratches very easily and even magnets can causedamage to the surface.

Guide to the appliance

15

Exterior view1 2

3

4

5

6

a On/Off sensor

b Control panel

c Door handle

d Automatic height-adjustable central spout with lighting

e Drip tray cover

f Milk flask

Guide to the appliance

16

Interior view

a Bean container

b Milk valve

c Automatic height-adjustable central spout with lighting

d Grinder setting

e Bean container

f Fan outlet

g Water container

h Drip tray with lid

i Brew unit

j Waste container

k Maintenance container

l Drip catcher

Controls and indicators

17

6

a On/Off sensorFor switching the coffee machine onand off

b Drink sensorsFor making drinks

c DisplayFor showing information about thecurrent action or status

d sensor– For selecting more drinks, e.g.

Ristretto, Cappuccino Italiano– For selecting Coffee pot or Teapot– Settings menu

e User profiles sensorFor creating and managing profiles

f Maintenance sensorMaintenance programmes, e.g.Descale

g Parameters sensorFor displaying and changing drinksettings

h OK sensorFor confirming display messages andsaving settings

i Navigation area with arrowsensors For scrolling through lists of options,highlighting a selection or changingvalues

j “Back” sensorFor going back a menu level andcancelling unwanted actions

k "2 portions“ sensorFor dispensing two portions of adrink at the same time

l “DoubleShot” sensorFor a making a particularly strongand aromatic coffee with twice theamount of coffee powder, but thesame amount of water

m Optical interface(for Miele service technicians only)

Controls and indicators

18

Drink sensor symbols

Espresso

Coffee

Long coffee

Cappuccino

Latte macchiato

Cafè latte

Hot milk

Milk froth

Tea water

Operating principles

19

Sensor controlsTo operate the coffee machine, touchthe sensors with your finger.

An audible signal is generated eachtime a sensor is touched. You canadjust the volume of the signal tonesor switch the tones off (see “Settings –Volume”).

Drinks menuWhen Select drink appears in the display,you are in the drinks menu:

Select drink

Miele 12:00

You can find more drinks in the Other( sensor) menu.

Navigation areaTo select an option, touch the or arrow sensor until the option you wantis highlighted.

To scroll faster, swipe left or right in thearea between the arrows.

The OK sensor lights up orange as soonas a value, prompt or setting can beconfirmed.

Touch OK to confirm your selection.

Selecting a menu andnavigating within a menuTo select a menu, touch the relevantsensor, e.g. the sensor.

Ristretto

Cappuccino Italiano

Settings

Miele 12:00

You will then be able to start an actionor change settings in the menu. A baron the right-hand side indicates thatfurther options or text are available.

The setting in a list which is currentlyselected will have a tick beside it.

Exiting a menu or cancelling anactionTouch the sensor to exit the currentmenu.

Alternatively, touch the sensorhighlighted in orange to return to thedrinks menu.

Entering a nameLetters and numbers are entered via thenavigation area. You can select bothupper and lower case letters.

Useful tip: It is best to select short,memorable names.


20

Name

A B C D E FZ

– To enter a character, highlight acharacter and confirm the selectionwith OK.

– To delete a character, touch the sensor.

– A name is saved by selecting thetick and confirming with OK.


21

Symbols in the displayThe following symbols may also appear in the display in addition to the text anddrinks symbols:

Symbol Explanation

This symbol indicates the “Settings” menu and the“Language” menu option.

This symbol indicates that there is additional informationand advice about using the coffee machine. Select OK toconfirm the information.

This symbol appears if the system lock is activated.Operation is locked.

This symbol and the desired switching on time appear in thedisplay up to 23:59 hours before the coffee machine is dueto switch on if the Switch on at timer and the time display areactivated (see “Settings - Timer”).

The TeaTimer minute minder has been started (see “Tea -TeaTimer”). The remaining brewing time is shown next to thesymbol.

This symbol appears while the appliance is being descaled.(This symbol can also be found on the water container: fillup to this mark).

The symbol is displayed during the Clean milk pipeworkmaintenance programme.(This symbol can also be found on the water container: fillup to this mark with water.)

If Miele@home is activated for the coffee machine, the Wi-Ficonnection is indicated with these symbols. The symbolsindicate the strength of the Wi-Fi connection in gradationsfrom strong to not connected.

Miele@home

22

Your coffee machine is equipped withan integrated Wi-Fi module.

In order to use it you need:

– a Wi-Fi network

– the Miele@mobile App

– a Miele user account. The useraccount can be created via theMiele@mobile App.

The Miele@mobile App will guide youas you connect your coffee machine toyour home Wi-Fi network.

Once your coffee machine is connectedto your Wi-Fi network, you can use theApp, for example, to carry out thefollowing activities:

– Call up information on the operatingstatus of your coffee machine

– Change the settings of your coffeemachine

– Operate your coffee machineremotely

Connecting your coffee machine to yourWi-Fi network will increase energyconsumption, even when the coffeemachine is switched off.

Before installing the coffee machinein its final location, ensure the signalstrength of your Wi-Fi network issufficient.

Availability of the Wi-FiconnectionThe Wi-Fi connection shares afrequency range with other appliances(including microwave ovens and remotecontrol toys). This may result insporadic or even complete connectionfailures. Therefore, a constantavailability of featured functions cannotbe guaranteed.

Miele@home availabilityThe ability to use the Miele@mobile Appdepends on the availability of theMiele@home service in your country.

The Miele@home service is notavailable in every country.

For information about availability,please visit www.miele.com.

Miele@mobile AppYou can download the Miele@mobileApp from the Apple App Store® or theGoogle Play Store™ free of charge (onlyfunctional in selected countries).

Before using for the first time

23

Before using for the first time Connect the coffee machine to the

mains electricity supply.

Install the coffee machine.

Remove any protective foil andstickers from the machine. Exception:Please do not remove any labels (e.g.the data plate) which are visible whenyou open the appliance door.

Remove the protective foil from thedrip tray cover.

Clean the appliance thoroughlybefore filling it with water and coffeebeans (see “Cleaning and care”).

Clean the coffee machine (see“Cleaning and care”).

Remove the water container and fill itwith fresh, cold tap water. Only fill thewater container up to the “max.”marker and then refit it in the machine(see “Filling the water container”).

Remove the bean container and fill itwith roasted coffee beans.

Switching on for the first time Touch the On/Off sensor.

Selecting the display language andcountry

The country that is selecteddetermines the time display, e.g. 12 or24-hour format, or the units etc.displayed.

Select the required display language.

Then select the country.

Setting up the network (Miele@home)

You can connect your coffee machineto your local Wi-Fi network.

The following appears in the displayduring set-up: Set up Miele@home.

Useful tip: You can also set upMiele@home for your coffee machine ata later time. Then select Skip.

Make sure that the signal of your Wi-Fi network is sufficiently strong in theplace where you want to set up yourcoffee machine.

Touch Continue.

Select the connection method youwish to use.

Follow the instructions in the coffeemachine display and in theMiele@mobile App.

Connection successfully establishedappears in the display.

Touch Continue to continue with theset-up.

Setting the date

Enter the current date and touch OK.

Setting the time of day

Enter the current time of day andtouch OK.

If you have connected the coffeemachine to a Wi-Fi network and havesigned it on in the Miele@mobile App,the time will be synchronised basedon the country setting in theMiele@mobile App.

Before using for the first time

24

Setting the water hardness level

Contact your local water supplier tofind out your local water hardnessrange if necessary.

See “Settings - Water hardness” formore information.

Enter the local water hardness level(in °dH) and confirm with OK.

Selecting Performance mode

Select the most suitable modedepending on your coffee preferences(see “Settings - Performance mode”).

– Eco mode: This is an energy savingmode.

– Barista mode: This mode isoptimised for perfect coffeeenjoyment.

– Latte mode: In this mode drinks withmilk can be made significantly faster.

Select the required mode and confirmthis with OK.

Your machine has been successfully setup and is ready for use.

To ensure that any coffee residuesfrom the factory testing process areremoved from the brewing system,please pour away the first two cupsof coffee when using the coffeemachine for the first time.

Filling the coffee bean container

25

Coffee or Espresso can be made fromwhole roasted coffee beans which arefreshly ground for each portion. Thisrequires the coffee bean container to befilled with coffee beans.

Risk of damage to the grinderdue to incorrect operation.The coffee machine will be damagedif the bean container is filled withunsuitable substances such asliquids, ground coffee or coffeebeans treated with sugar, caramel orsimilar.In addition, green (unroasted) coffeebeans or mixtures of coffee beanswhich contain green coffee beanscan damage the grinder. Greencoffee beans are very hard and stillcontain residual moisture. These candamage the coffee machine grinderas soon as grinding begins.Only put roasted coffee beans in thebean container.

There are two bean container drawersat the top right and left of the coffeemachine. The coffee beans from allthree bean containers are mixedtogether when ground.

Open the appliance door.

Pull out the coffee bean containers.

Remove each lid and fill the beancontainers with roasted coffee beans.

Close the bean containers with theirrespective lids.

Insert the coffee bean containerdrawers fully in the coffee machine.Close the appliance door.

Filling the water container

26

Risk to health due tocontaminated water.Bacteria can develop in water whichhas been sitting in the watercontainer for too long and is a risk toyour health.Change the water in the watercontainer every day.Pour out the water from the watercontainer if a drink has not beenprepared for a long time.

Risk of damage due to incorrectoperation.Unsuitable liquids such as hot orwarm water or other liquids candamage the coffee machine.Carbonated water leaves too muchlimescale in the coffee machine.Only use cold, fresh tap water to fillthe water container.


Pull the water container out toremove it.

Fill the water container with cold,fresh tap water up to the “max.”mark.

Insert the water container in themachine and close the appliancedoor.

Switching on and off

27

Switching the coffee machineon Touch the On/Off sensor.

The coffee machine heats up and rinsesthe pipework. Hot water will run out ofthe central spout.

You can now make drinks.

If the coffee machine is already atoperating temperature, rinsing will nottake place.

While dispensing a drink or duringmaintenance processes, moisturebuilds up in the coffee machine. Theinternal fan expels moisture from theinterior of the appliance. The fan willcontinue to run after dispensing adrink or for approx. 30 minutes afterswitching off the appliance. You willhear an accompanying noise.

Switching the coffee machineoff Touch the On/Off sensor.

If coffee has been dispensed, the coffeemachine will rinse the coffee pipeworkautomatically before switching off.

Switching off for longerperiods of timeIf the coffee machine is not going to beused for a longer period of time, e.g. ifyou are going on holiday, please do thefollowing:

Empty the drip tray, the wastecontainer and the water container.

Clean all parts thoroughly, includingthe brew unit and the interior of themachine.

Switch the coffee machine off.

Spout adjustment

28

The height of the central spout cannotbe manually adjusted.

Before making the drink, the centralspout moves down and the cup sensorstops it at the optimum height for thecups or glasses being used.

When the coffee machine is switchedoff, the central spout moves to amedium height.

When a maintenance programme isbeing carried out, the central spout willmove to the height of the cleaningcontainer or into a lower maintenanceposition.

Ensure the central spout is in eitherthe upper or middle position beforeopening the door.

Making drinks

29

Danger of burning and scaldingon the dispensing spouts.The liquids and steam dispensed arevery hot and can cause scalding.Keep well away from the areaunderneath the spouts when hotliquids and steam are beingdispensed.Do not touch hot components.

Making coffee drinks with andwithout milkThe following drinks can be made:

– Ristretto is a strong, concentratedespresso. It is prepared with thesame amount of coffee as for anespresso but with much less water.

– Espresso is a strong aromatic coffeewith a thick hazelnut brown colouredfroth - known as the crema - on top. We recommend using espressoroasted coffee beans to make anespresso.

– Coffee differs from espresso by theincreased amount of water and theroast of the beans.We recommend using coffee beanswith the appropriate roast to makethe coffee.

– Long coffee is a coffee withconsiderably more water.

– Long black is made with hot waterand two shots of espresso.

– Caffè Americano consists of equalproportions of espresso and hotwater. The espresso is made first,then the hot water is dispensed.

– Cappuccino consists of approx. 2/3milk froth and 1/3 espresso.

– Latte macchiato consists of 1/3each of hot milk, milk froth andespresso.

– Caffè latte consists of hot milk andespresso.

– Cappuccino Italiano has the sameproportions of milk froth andespresso as a cappuccino. Thedifference is that the espresso isadded first and then the milk froth.

– Espresso macchiato is an espressowith a small amount of milk froth ontop.

– Flat white is a special variation of thecappuccino: a much greater amountof espresso compared to milk frothcreates an intensive coffee aroma.

– Café au lait is a French coffeespeciality made from coffee and milkfroth. Café au lait is normally servedin a bowl.

Hot milk or milk froth can also bemade separately.

Making drinks

30

Preparing hot milk

Additives containing sugar or milkalternatives, e.g. soy milk, can clogthe milk pipework and milk carryingparts. Residues from unsuitableliquids may adversely affect correctpreparation.Do not use milk with additives.Use only pasteurised cow's milk.

Useful tip: Using cold cow's milk(< 10 °C) with a protein content of atleast 3% will produce the perfect milkfroth.You can select milk with a fat contentaccording to preference. With full creammilk (at least 3.5% fat), the milk frothwill be slightly creamier than with low-fat milk.

Milk flask

Milk is not cooled in the milk flask.Use cold milk (< 10 °C) to produce agood quality milk froth.

a Lid

b Milk suction tube

c Milk level sensors

d Glass milk flask

Filling and fitting the milk flask

Fill the milk flask with milk up to amaximum of 2 cm below the rim. Sealthe milk flask with the lid.

Push the milk flask into the coffeemachine until it clicks into place.

Useful tip: The milk flask is easier toremove with two hands.

Making drinks

31

Making a coffee drink

Place a cup or glass under the centralspout.

Touch the sensor for the drink youwant.

Preparation will begin and the coffeewill be dispensed into the cup or glassfrom the central spout.

Cancelling preparation Touch the control panel symbol

illuminated in orange again.

If you are making drinks with more thanone component, e.g. latte macchiato,you can cancel the preparation of eachcomponent early.

Touch OK when Stop appears in thedisplay.

DoubleShotSelect the DoubleShot function tomake a particularly strong and aromaticcoffee. In this case, more coffee beanswill be ground and brewed halfwaythrough brewing. Due to the reducedextraction time, fewer unwanted aromasand bitter substances are released.

DoubleShot can be activated for allcoffee drinks except “Ristretto” and“Long black”.

Making a DoubleShot of coffee

Touch the sensor immediatelybefore or after you have startedmaking a drink.

Preparation starts and the sensorlights up orange. Two portions of coffeebeans will be ground and brewed.

Making 2 portions ( sensor)You can also dispense two portions of adrink into one large cup or dispensetwo portions into two cups at the sametime.

Place one cup under each of thecoffee spouts.

Touch the sensor immediatelybefore or after you have startedmaking a drink.

Making drinks

32

The sensor lights up.

Preparation starts and the symbollights up orange. Two portions of thedesired drink will be dispensed.

Coffee potYou can make several cups of coffeeone after the other automatically withthe Coffee pot function (max. 1 litre).

The drinks menu is displayed.

Useful tip: Before starting Coffee pot,ensure the bean containers and thewater container are sufficiently filled.

Place a sufficiently large containerunder the central spout.

Touch the sensor.

Select Coffee pot and confirm withOK.

Select the number of portions youwant to dispense (3 to 8).

Each cup of coffee will be brewed anddispensed individually. The display willinform you about the progress.

Cancelling preparation

Touch the sensor.

Making drinks

33

Tea

This coffee machine is not intendedfor commercial or scientific purposes.Temperatures given are approximateand can vary according to ambientconditions.

To make tea, you can select from thefollowing options:

– Japanese tea is a high quality greentea and has a delicate, fresh, “green”flavour.Dispensing temperature:approx. 65 °C; brewing time:approx. 1.5 minutes

– White tea is a green tea where onlythe young buds of the tea plant,which are still white, are used andprocessed very gently. White tea hasa particularly mild flavour.Dispensing temperature:approx. 70 °C; brewing time:approx. 2 minutes

– Green tea gets its green colour fromthe leaves of the tea plant. The tealeaves are processed gently indifferent ways – either roasted orsteamed – depending on the region.Green tea can be infused multipletimes.Dispensing temperature:approx. 80 °C; brewing time:approx. 2.5 minutes

– Black tea gets its dark colour andtypical flavour from the fermentationof the tea leaves. Black tea can bedrunk with a little lemon or with milk. Dispensing temperature:approx. 97 °C; brewing time:approx. 3 minutes

– Chai tea has its origins in thetraditional Ayurveda medicine as ablack tea with typically Indian spicesand milk. The milk mellows thespices and tops off the flavourexperience.Dispensing temperature:approx. 97 °C; brewing time:approx. 3 minutes

– Herbal tea is an aromatic infusiondrink made up of dried leaves orfresh parts of plants.Dispensing temperature:approx. 97 °C; brewing time:approx. 8 minutes

– Fruit tea consists of dried pieces offruit and/or parts of plants, e.g. rosehip. The flavour varies depending onthe plants used and their blend.Many fruit teas are also flavoured.Dispensing temperature:approx. 97 °C; brewing time:approx. 8 minutes

The type of tea determines the presettemperature. The respective dispensing temperaturesare recommended by Miele for makingthese types of tea.

You can change the dispensingtemperatures of individual teas bychanging the brewing temperature fora particular tea (see “Parameters -Brewing temperature”). Temperaturesgiven are approximate and can varyaccording to ambient conditions.

Whether you use loose tea leaves,blended tea or tea bags depends onyour own personal preferences.

Making drinks

34

Follow the instructions for makingtea on the tea packaging.

The amount of tea to use varies fromone type of tea to the next. Alwaysfollow the recommendations of themanufacturer on the packaging or ofthe supplier. The amount of hot waterused can be adjusted depending on thetype of tea and the size of the cup (see“Portion size”)

TeaTimer

You can use the TeaTimer function tostart a minute minder when making tea.A specific brewing time is preset for theselected type of tea. You can changethe preset brewing time (max. 14:59minutes).

While the brewing time is countingdown, you can continue to use thecoffee machine as normal. An audibletone will sound and the symbol willflash after the brewing time haselapsed.

Setting the TeaTimer

You can select from the followingoptions:

– Automatic: The TeaTimer startsautomatically when tea dispensinghas finished.

– Manual: When tea dispensing hasfinished, you have the option ofstarting the TeaTimer.


Touch the sensor.

Select Settings | TeaTimer.

Select the setting you want andconfirm with OK.

Making tea

If you touch the sensor, a menu withvarious types of tea will appear.


Pour loose tea into a tea filter orsimilar or take a tea bag from thepacket.

Place the tea filter or the tea bag inthe tea cup.

Place the tea cup under the centralspout.

Touch .

Select the type of tea you want andconfirm your choice with OK.

Hot water will be dispensed into thecup.

If you have selected the TeaTimer | Automatic setting, the minute minder forthe brewing time will start afterdispensing the water for the tea.

Starting the TeaTimer manually

TeaTimer appears in the display as soonas the water for the tea has beendispensed.

Touch OK.

The editor will open with a suggestedtime.

Change the brewing time, ifnecessary, and confirm with OK.

An audible tone will sound and the symbol will flash after the brewingtime has elapsed.

Making drinks

35

Remove the tea filter or tea bag whenthe desired brewing time haselapsed.

Teapot

You can use the Tea pot function todispense a larger quantity of water formaking tea (max. 1 litre). The selectedtype of tea determines the presettemperature.


Useful tip: Before starting Tea pot,ensure the water container is sufficientlyfilled.

Place a sufficiently large containerunder the central spout.

Touch the drink sensor control.

Select Tea pot.

Select the desired type of tea and thedesired number of cups (3-8).

Cancelling preparation

Touch the sensor.

Preparing warm and hot waterYou can select from the followingoptions:

– Hot water (approx. 90 °C)

– Warm water (approx. 65 °C)


Place a suitable cup or glassunderneath the central spout.

Touch the sensor.

Select warm or hot water.

Confirm with OK.

Dispensing will start.

Expert mode

36

With the Expert mode function you canchange the portion size while the drinkis being made. The setting will not besaved and will only apply for the currentdrink.

Switching Expert mode on andoffThe drinks menu is displayed.

Touch the sensor.

Select Settings | Expert mode.

Select the desired option.

Confirm with OK.

The setting is now saved.

Expert mode: Changing theportion sizeThe drinks menu is displayed.

The portion size can only be changedwhen the respective ingredient isbeing processed while the drink isbeing made.

If you select DoubleShot or2 portions , the portion size can bechanged temporarily.

Select a drink.

Dispensing will start. You can adjust theportion size while it is being dispensed,e.g. individually change the amount ofhot milk, milk froth and espresso forLatte macchiato.

Dispensing

Move the control (small triangle) inthe navigation area to the desiredposition.

Grinder setting

37

When the beans are ground correctly,the coffee or espresso will flow evenlyinto the cup with a good crema.The crema should have an evenhazelnut brown colour.

The grinder setting you select will beused for all coffee drinks.

There are various ways to tell whetherthe coffee grinder is set correctly.

The coffee has been too coarselyground if:

– espresso or coffee flows into the cuptoo quickly,

– the crema is very pale and uneven.

Set a finer grinder setting.

The coffee has been too finely groundif:

– espresso or coffee flows into the cupvery slowly,

– the crema is dark brown.

Set a coarser grinder setting.

Only adjust the grinder one setting ata time.Start making a drink to grind beansagain. Adjust the grinder setting onesetting at a time again.

Adjusting the grinder settingThe slide control for the grinder settingis located at the top left behind thewater container.


Remove the water container.

Push the slide control a maximum ofone setting to the front (for finergrinding) or to the back (for coarsergrinding).

Push the water container back intothe machine.

Close the appliance door.

Make one cup of coffee.

Then you can adjust the grinder settingagain.

Parameters

38

Displaying and changingparametersYou can change the portion size for alldrinks.For coffee drinks, you can also set theamount of coffee, the brewingtemperature and pre-brewing for eachcoffee drink individually.

Touch the sensor.

Select a drink and confirm with OK.

The parameters that you can change forthis drink will be displayed.

If you have selected a coffee drink, thecurrent settings for Amount of coffee,Brew temperature and Pre-brewing will bedisplayed.

The Portion size option is displayed. Ifyou select Portion size and confirmwith OK, drink preparation will beginimmediately.

Select the required parameters.

Change the setting as required andconfirm with OK.

The setting is now saved.

Portion sizeThe flavour of the coffee produceddepends not only on the type of coffee,but also on the amount of water used.You can programme the amount ofwater for all drinks (except coffee pot)to suit the size of your cups and/or thetype of coffee you are using, forexample.

For coffee drinks that use milk you canalso set the amount of milk or milk frothto be dispensed with these drinks.

A maximum portion size can beprogrammed for each type of drink. Thecoffee machine halts preparation of thecoffee once this portion size has beenreached. The maximum possibleportion size is then saved by theappliance for this type of drink.

If the water container becomes emptyduring the preparation of a drink, theprogramming of the portion size willbe cancelled. The portion size will notbe saved.

The changed portion size is alwayssaved in the current profile. The nameof the current profile is shown in the topleft of the display.

Changing the portion size

Place a cup or glass under the centralspout.

Select Portion size and confirm withOK.

The desired drink will be made and Savewill appear in the display.

When the cup is filled up to the levelyou want, touch OK.

If you want to change the portion sizefor coffee specialities made with milk,the ingredients which make up the drinkwill be saved one after the other whilethe drink is being made.

When the quantity for each ingredientreaches the level you want, touch OK.

The programmed combination ofingredients and portion sizes will nowbe dispensed every time that particulardrink is selected.

Parameters

39

Useful tip: You can change the portionsize of drinks shown in the display bytouching and holding a sensor duringpreparation. Touch the desired drinksensor until preparation starts. Saveappears in the display duringdispensing.

Amount of coffeeThe coffee machine can grind and brew7.5–12.5 g of coffee beans per cup. Thegreater the quantity, the stronger thecoffee.

There are various ways to tell whetherthe amount of coffee is set correctly:

The amount of coffee is too low if:

– espresso or coffee flows into the cuptoo quickly,

– the crema is very pale and uneven,

– the espresso or coffee lacks body.

Increase the amount of coffee so thatmore ground coffee is brewed.

The amount of coffee is too high if:

– espresso or coffee flows into the cupvery slowly,

– the crema is dark brown,

– the espresso or coffee tastes bitter.

Decrease the amount of coffee so thatless ground coffee is brewed.

Brewing temperatureThe ideal brewing temperature willdepend on

– the type of coffee being used

– whether an espresso or a coffee isbeing made, and

– the altitude of the region.

Useful tip: Not all types of coffeetolerate high temperatures. Severaltypes are sensitive to hightemperatures, resulting in an impairedcrema and taste.

You can also adjust the brewingtemperature for tea drinks, warm waterand hot water.

Pre-brewing ground coffeeWhen the pre-brewing function isswitched on, the freshly ground coffeeis first moistened with a little hot water.Then the remaining water is forcedthrough the moistened coffee at highpressure. This helps release the flavourof the coffee.

You can set pre-brewing for a normallength of time or an extra long length oftime. Alternatively, you can switch offthe “Pre-brewing” function. The machine is supplied with the “Pre-brewing” function switched off.

User profiles

40

In addition to the Miele drinks menu(Miele profile), you can create individualprofiles to cater for different tastes andpreferences.

The portion quantities and parametersfor all drinks can be adjusted in eachprofile.

The name of the current profile isshown in the top left of the display.

Creating a profile Touch the sensor.

The User profiles menu opens.

Select Create profile and confirm withOK.

The editor will open in the display.

Enter the profile name:

– To enter a character, highlight acharacter and confirm the selectionwith OK.


– A name is saved by selecting thetick and confirming with OK.

The profile is created.

Changing drinks in a profileIf you change parameters in a profile,e.g. portion size, these settings apply tothe active profile only. The settings fordrinks in other profiles are not affected.

Select the profile you want.

The name of the profile selected will beshown in the top left-hand corner of thedisplay.

You can now change the drinksindividually (see “Parameters”).

Preparing User profile drinks Touch the sensor.

Select the profile you want.

Select the drink you want.

Drink preparation starts.

Processing profilesWhen you have created at least oneprofile, you can rename, delete or moveprofiles in the User profiles menu.

Select Edit and confirm with OK.

You can now process the selectedprofile.

Setting change of profile

You can select from the followingoptions:

– Manual: The selected profile remainsactive until you select another profile.

– After each use: The Miele profile isdisplayed after every drink.

– When switched on: Every time thecoffee machine is switched on, theMiele profile is displayed, regardlessof which profile had been selectedbefore switching off.

Select Change profile and confirm withOK.

Select the option you want andconfirm this with OK.

User profiles

41

Changing a name

This selection is only possible if aprofile has been allocated in additionto the Miele standard profile.

Select Change name and confirm withOK.

Change the name as required:


– To enter new characters, highlight acharacter and confirm the selectionwith OK.

– The changed name is saved byselecting the tick and confirmingwith OK.

Deleting a profile

This selection is only possible if aprofile has been allocated in additionto the Miele standard profile.

Select Delete profile and confirm withOK.

Select the profile you wish to delete.

Select Yes and confirm with OK.

The profile is deleted.

MobileStart

42

With MobileStart you can start making adrink, for example, via theMiele@mobile App.

You can only use MobileStart ifMiele@home is set up for your coffeemachine.

Danger of burning and scaldingon the dispensing spouts.If liquids or steam are dispensedwhile the machine is unsupervised,persons may burn themselves if theyplace body parts under the centralspout or touch hot components.Ensure that no one, especiallychildren, can be harmed if themachine is operated withoutsupervision.

Milk is not cooled in the milk flask. Ifyou want to start making a drink withmilk using the App, make sure that themilk is sufficiently cold (< 10 °C).

If the coffee machine is beingoperated manually, it cannot beoperated via the App. Operation onthe appliance takes precedence.

To start making drinks remotely,MobileStart must be activated and thecoffee machine must be ready to use.This means:

– The water container is sufficientlyfilled.

– The bean container contains enoughbeans.

– The drip tray and waste container areempty.

– If milk was used before the machinewas last switched off, the milkpipework needs to be rinsed beforeswitching off.

– If milk is being prepared, the milkflask must be fitted. Pay attention tothe temperature of the milk.

– A sufficiently large, empty glass orcup is placed under the centralspout.

MobileStart will be deactivated after24 hours.

If you are making a drink withMobileStart, you will be notified ofdrink dispensing with acoustic andoptical signals. These signals cannotbe changed or switched off.

Switching MobileStart on andoffIf you want to use MobileStart, theRemote control option must be switchedon.


Touch the sensor.

Select MobileStart.

Select the option you want andconfirm this with OK.

If you have switched on MobileStart, youcan now start making a drink via theApp. Follow the prompts for doing this.

Settings

43

You can use the Settings menu tocustomise the coffee machine to suityour individual requirements.

Displaying and changingSettingsThe drinks menu is displayed.

Touch the sensor.

Select Settings and touch OK.

Select the option you want to displayor change.

Confirm with OK.

Change the setting as required andconfirm with OK.

Some settings which can be found inthe Settings menu are described intheir separate sections in theoperating instructions.

LanguageYou can select a language and countryvariant for all display texts.

Useful tip: If you select the wronglanguage by mistake, you can find the“Language” option again via the symbol.

Time of day

Display (time display)

Select how you want the time of day toappear in the display when the coffeemachine is switched off:

– On: The time is always visible in thedisplay.

– Off: The time is not displayed.

– Night dimming: To save energy, thetime is displayed from 5:00 to 23:00only.

Clock format

– 24-hour display (24 h)

– 12-hour display (12 h)

Setting

Set the hours and then the minutes.

If you have connected the coffeemachine to a Wi-Fi network and havesigned it on in the Miele@mobile App,the time will be synchronised basedon the country setting in theMiele@mobile App.

DateSet the date.

TimerThe coffee machine has two timers withthe Switch on at and Switch off at timerfunctions.

You can allocate individual timerfunctions to different days of the week.

Switch on at

The coffee machine switches on at aparticular time, e.g. in the morning forbreakfast.

The coffee machine will not switch onat the required time if you haveactivated the system lock.The timer settings are deactivated.

If the coffee machine has switched itselfon automatically three times at thespecified time and no drinks have been

Settings

44

dispensed, the machine will not switchitself on again automatically. Thisprevents the coffee machine fromswitching itself on unnecessarily, forexample, whilst you are away onholiday.The programmed times will, however,remain in memory and will bereactivated after manually switching themachine on again.

If you have switched on the time displayfor the switched off appliance (Show |On or Night dimming) the symbol andthe desired switch-on time will appearin the display up to 23:59 hours aheadof time.

Switch off at

The coffee machine switches off at aparticular time.

In the event of a longer absence, theprogrammed times will remain inmemory and will be reactivated aftermanually switching the machine onagain.

Switch off after

The coffee machine switches off after aparticular length of time if no sensorshave been touched.

Under the default settings the coffeemachine switches off after 20 minutes.

You can change this preset to a time ofbetween 20 minutes and 9 hours.

TeaTimerYou can use the TeaTimer to start aminute minder when making tea (see“Making drinks - TeaTimer”).

VolumeYou can set the volume of buzzer andkeypad tones using the segment bar.

The welcome melody that sounds whenthe On/Off sensor is touched can beswitched on or off.

Display brightnessYou can set the display brightnessusing the segment bar.

LightingYou can adjust the brightness of thelighting when the machine is switchedon or off.

You can also set for the switched offappliance the length of time after whichthe lighting should switch off (between15 minutes and 9 hours).

Info (display information)You can display the number of drinkportions or the number of possibleportions before maintenanceprogrammes are necessary.

AltitudeIf the coffee machine is installed at highaltitudes, the lower air pressure willcause the water to boil at a lowertemperature. You can set the localaltitude of the machine to ensure thatthe correct temperatures are achieved.

Performance modeYou can select the most suitableperformance mode for your type of use.Eco mode is set as standard.

Settings

45

Eco mode

Eco mode is an energy saving mode.The system heats up only once drinkpreparation has started.

Barista mode

This Performance mode is optimised forperfect coffee enjoyment. Coffee drinkscan be prepared without any delay asthe coffee machine remains heated tothe brewing temperature. This modeconsumes more energy than Eco mode.

Latte mode

This mode is optimised for preparingdrinks containing milk. Milk-baseddrinks can be prepared much faster.This mode consumes more energy thanEco mode and Barista mode

Party mode

This Performance mode is designed forinfrequent, intensive use of the coffeemachine, e.g. for family parties.

After intensive use, clean the coffeemachine, and particularly the milkpipework, thoroughly. If necessary,descale the machine and degreasethe brew unit.

Please note the following informationabout Party mode:

– The pipework is rinsed much lessfrequently or not at all. The milkpipework is not rinsed until around1 hour after the last drink with milkwas dispensed.

– Any messages on the maintenancestatus, or maintenance prompts, aresuppressed and delayed until thenext time the machine is switchedon.

– The Switch off at and Switch off aftertimer are deactivated. The coffeemachine switches off 6 hours afterthe last sensor has been touched.

– Cup lighting on the central spout isswitched on permanently at themaximum brightness level for as longas the coffee machine is switched on.

Water hardnessProgramme the coffee machine to thewater hardness level of your area sothat it functions correctly and does notget damaged.

Contact your local water supplier to findout your local water hardness range ifnecessary.

If you are using bottled drinking water,e.g. mineral water, select settingsaccording to the calcium content. Thecalcium content is given on the label ofthe bottle in mg/l Ca2+ or ppm (mgCa2+/l).

Do not use carbonated water.

The water hardness is preset at thefactory to 21° dH (3.8 mmol/l).

Settings

46

Water hardness Calciumcontent

mg/l Ca2+

or

ppm (mg Ca2+

/l)

Setting

°dH mmol/l

1 0.2 7 1

2 0.4 14 2

3 0.5 21 3

4 0.7 29 4

5 0.9 36 5

6 1.1 43 6

7 1.3 50 7

8 1.4 57 8

9 1.6 64 9

10 1.8 71 10

11 2.0 79 11

12 2.1 86 12

13 2.3 93 13

14 2.5 100 14

15 2.7 107 15

16 2.9 114 16

17 3.0 121 17

18 3.2 129 18

19 3.4 136 19

20 3.6 143 20

21 3.8 150 21

22 3.9 157 22

23 4.1 164 23

24 4.3 171 24

25 4.5 179 25

26 4.6 186 26

27 4.8 193 27

28 5.0 200 28

29 5.2 207 29

Water hardness Calciumcontent

mg/l Ca2+

or

ppm (mg Ca2+

/l)

Setting

°dH mmol/l

30 5.4 214 30

31 5.5 221 31

32 5.7 229 32

33 5.9 236 33

34 6.1 243 34

35 6.3 250 35

36 6.4 257 36

37-45 6.6-8.0 258–321 37-45

46-60 8.2-10.7 322–429 46-60

61-70 10.9-12.5

430-500 61-70

Useful tip: If your water hardness is>21 °dH (3.8 mmol/l), we recommendinstead to use bottled drinking water(< 150 mg/l Ca2+). This will mean yourcoffee machine will need to bedescaled less often and there will beless impact on the environmentbecause less descaling agent will beused.

System lock You can lock the coffee machine toprevent it being used without yourknowledge, for example by children.

When the system lock is activated, thesettings for the Switch off after timer aredeactivated. The coffee system willnot switch on at the time set and/ordoes not react on approach.

Overriding the system lock

Touch OK for 6 seconds.

Settings

47

The system lock is activated the nexttime the machine is switched off.

Miele@homeThe following points may appear underMiele@home:

– Set up: This option only appears ifthe coffee machine has notpreviously been connected to a Wi-Finetwork or the Network configurationhas been reset.

– Deactivate*/Activate*: The settingsfor the Wi-Fi network are retained,but the network is switched on or off.

– Connection status*: Informationabout the Wi-Fi connection isdisplayed. The symbols indicate thestrength of the connection.

– Set up again*: The settings for thecurrent Wi-Fi network will be reset.The Wi-Fi connection will be set upagain.

* This option appears if Miele@homehas been set up and the coffeemachine has been connected to yourWi-fi network.

Remote controlRemote control appears when thecoffee machine is connected to a Wi-Finetwork.

You can change the coffee machinesettings, for example, when remotecontrol is switched on in theMiele@mobile App. To start making adrink via the App, MobileStart must beadditionally activated.

Remote control is switched on asstandard.

RemoteUpdate

The RemoteUpdate menu option isonly displayed and can only beselected if the requirements for usingMiele@home have been met.

The RemoteUpdate function is used forupdating the software in your coffeemachine. If an update is available foryour coffee machine, this will bedownloaded by the machineautomatically. Updates will not beinstalled automatically. They must beinitiated manually.

If you do not install an update, you cancontinue to use your coffee machine inthe usual way. However, Mielerecommends installing updates.

Switching on/Switching off

RemoteUpdate is switched on asstandard. Available updates will bedownloaded automatically and will onlybe installed if you initiate it.

Switch off RemoteUpdate if you do notwish any updates to be downloaded.

Running a RemoteUpdate

Information about the content andscope of an update is provided in theMiele@mobile App.

A message will appear in your coffeemachine display if a software update isavailable.

You can install the update immediatelyor postpone it until later. When thecoffee machine is switched on again,you will be reminded about the update.

Settings

48

Switch RemoteUpdate off if you do notwish to install updates.

The update can take several minutes.

Please note the following informationabout the RemoteUpdate function:

– You will only receive a message whenan update is available.

– Once an update has been installed, itcannot be undone.

– Do not switch off the coffee machinewhile an update is being downloadedor installed. Otherwise, the updatewill be aborted and will not bedownloaded or installed.

– Some software updates can only becarried out by a Miele servicetechnician.

Software versionThe “Software version” menu option isintended for Miele service technicians.You do not require this information foryour own use.

Showroom programme (Demomode)

Do not activate this setting fordomestic use.

The Showroom programme | Demo modefunction enables the coffee machine tobe demonstrated in stores orshowrooms. In this mode, the machinelights up but drinks cannot be preparedor maintenance programmes carriedout.

Factory default settingsYou can reset the settings back to theones which were set when the coffeemachine was delivered - the factorydefault settings.

The following will not be reset:

– The number of drinks and theappliance status (No. of uses untilappliance needs descaling, ...brew unit needs degreasing)

– Language

– Time and date

– Profiles and respective drinks

– Miele@home

Cleaning and care

49

Risk to health due to inadequate cleaning.Heat and moisture inside the coffee machine can cause coffee residues tobecome mouldy and/or milk residues to go off and pose a risk to health.Carefully clean the coffee machine regularly.

Cleaning intervals - Quick guide

Recommended frequency What do I have to clean / maintain?

Every day(at the end of the day)

Milk flask and lid

Milk valve

Water container

Drip tray cover

Drip tray and waste container

Once a week(more often if heavily soiled)

Central spout

Cup rim sensor

Interior

Brew unit

Drip catcher

Appliance front

Once a month Bean container

As required / When prompted bydisplay

Milk pipework (using the Miele Cleaning agent for milkpipework)

Degrease the brew unit (using the cleaning tablets)

Descale the appliance

Cleaning and care

50

Cleaning by hand or in thedishwasher

The brew unit is not dishwasher-safe.Clean the brew unit by hand onlyunder warm running water. Do notuse washing-up liquid or any othercleaning agent.

The following must be cleaned by handonly:

– Central spout stainless steel cover

– Brew unit

– Coffee bean container and lid

Risk of damage as a result ofexcessively high dishwashertemperatures.Components may be renderedunusuable (e.g. deformed) if washedin a dishwasher at a temperature ofmore than 55 °C.For dishwasher-safe parts, themaximum temperature of thedishwashing programme selectedmust not exceed 55 °C.

Contact with natural dyes such asthose found in carrots, tomatoes andketchup may discolour the plasticparts in the dishwasher. Thisdiscolouration does not affect thestability of the parts.

The following components aredishwasher safe:

– Drip tray with lid and waste container

– Drip tray cover

– Central spout (without stainless steelcover)

– Milk flask with lid

– Cup sensor

– Drip catcher

– Maintenance container

– Water container

Cleaning and care

51

Danger of burning and scaldingon hot components or by hot liquids.Components can become very hotduring operation. Touching hotcomponents can cause burning. Theliquids and steam dispensed are veryhot and can cause scalding.Keep well away from the areaunderneath the spouts when hotliquids and steam are beingdispensed.Always allow the coffee machine tocool down before cleaning it.Please be aware that water in thedrip tray can also be very hot.

Risk of damage due to moistureingress.The steam from a steam cleanercould reach electrical componentsand cause a short circuit.Do not use a steam cleaner to cleanthe coffee machine.

It is important to clean the machineregularly, as the used coffee groundswill soon go mouldy. Milk residues cango off and can block the milk pipework.

Unsuitable cleaning agents

Contact with unsuitable cleaningagents can alter or discolour allsurfaces. All surfaces of thisappliance are susceptible toscratching. Scratches on glasssurfaces could cause a breakage incertain circumstances.Remove any residual cleaning agentimmediately. To protect the machineand surrounding surfaces fromdamage, make sure you remove anyspillages or splashes of descalingagent immediately.

To avoid damaging the surfaces of yourappliance, do not use:

– cleaning agents containing soda,alkalines, ammonia, acids orchlorides

– solvent-based cleaning agents

– cleaning agents containing descalingagents (unsuitable for cleaning theappliance front)

– stainless steel cleaning agents

– dishwasher cleaners (unsuitable forcleaning the appliance front)

– glass cleaning agents

– cleaning agents for ceramic cooktops

– oven cleaner

– abrasive cleaning agents, e.g.powder cleaners and cream cleaners

– hard, abrasive brushes or sponges,e.g. pot scourers, brushes orsponges which have been previouslyused with abrasive cleaning agents

– dirt erasers

Cleaning and care

52

– sharp metal scrapers

– steel wool or stainless steel wirescourers

Cleaning and care

53

Cleaning the drip tray andwaste container

Danger of burning and scaldingon hot components or by hot liquids.Components can become very hotduring operation. Touching hotcomponents can cause burning. Theliquids and steam dispensed are veryhot and can cause scalding.If the pipework has just been rinsed,wait a while before removing the driptray as the water used for rinsing willstill run out of the coffee spouts.Please be aware that water in thedrip tray can also be very hot.Do not touch hot components.

Clean the drip tray and wastecontainer every day to avoidunpleasant smells and mildew.

A prompt will appear in the displaywhen the drip tray and/or the wastecontainer is full and needs to beemptied. Empty the drip tray and thewaste container. The lid of the drip traydoes not need to be removed foremptying.

Useful tip: If the drip tray is very dirty,clean it with a brush prior to placing it inthe dishwasher.


Remove the drip tray with the wastecontainer from the appliance.

Remove the waste container from thedrip tray and empty the wastecontainer.

Apart from coffee grounds, there mayalso be some water in the wastecontainer.

Dismantling the drip tray

The orange latches are notremovable.

Remove the lid from the drip tray:push the orange latches on eitherside outwards and undo the lid. Takethe lid off.

Cleaning and care

54

Clean the drip tray, the lid and thewaste container in the dishwasher, orby hand using warm water and a mildsolution of washing-up liquid.

Dry all parts afterwards.

Clean the interior of the coffeemachine underneath the drip tray.

Cleaning the contacts

Clean the contacts (metal discs) andthe space between them carefully,e.g. with a soft brush. Dry all partsthoroughly.

The contacts will not be able to detectthat the drip tray is full if they aredamp or dirty.Check the contacts and the areaaround them once a week.

Assembling the drip tray

Refit the lid of the drip tray: push thelid in under the lip next to thecontacts and press down on the liduntil the latches click into place.

Place the waste container on top ofthe lid.

Push the drip tray, together with thewaste container, back into the coffeemachine. Close the appliance door.

Cleaning and care

55

Cleaning the drip tray cover

Remove the drip tray cover: to dothis, push down on the rear edge ofthe cover so that the front lifts up andcan be easily removed.

The drip tray cover can be cleaned inthe dishwasher, or by hand usingwarm water, a little washing up liquid,and a soft cloth.

Dry the drip tray cover.

Refit the drip tray cover.

Cleaning the water containerClean the water container daily by handwith warm water and a little washing-upliquid. You can clean the watercontainer in the dishwasher once aweek.



Clean the water container and rinse itwith clean water to remove anydishwashing liquid residues. Dry theoutside of the water container.

Clean and dry the surface that thewater container sits on.

Fill the water container with cold,fresh tap water.

Push the water container all the wayinto the coffee machine. Close theappliance door.

Cleaning the central spout

Clean the central spout stainlesssteel cover by hand only using warmwater and a little washing-up liquid.

With the exception of the stainless steelcover, all parts of the central spoutshould be cleaned in the dishwasher atleast once a week. This will removecoffee deposits and milk residueseffectively.


Cleaning and care

56

Carefully pull the stainless steel coveroff and then clean it.

Release the milk pipework from thedispensing unit: to do this, pull thelug to the left.

The connection piece in the milkpipework should not be removed.Clean the connection piece, ifnecessary, with the cleaning brush.

Hold the dispensing unit on eitherside and pull down to remove it.

Cleaning and care

57

Dismantle the dispensing unit intothree pieces: disconnect the Y-shaped piece, the dispensing spoutsand the holder from one another.

Clean all parts thoroughly.

Clean the area surrounding thecentral spout with a damp cloth.

Reassembling the central spout

The dispensing unit is easier toreassemble if the individual parts aredampened with water beforehand.

Make sure that all parts are tightlyconnected to one another.

Reassemble the dispensing unit.Press firmly to connect thedispensing spouts correctly to theholder.

Insert the dispensing unit in thecoffee machine and connect the milkpipework.

Refit the stainless steel cover.


Fit cover to central spout appears in thedisplay.

Confirm the message with OK.

Cleaning the cup rim sensorThe cup rim sensor is locatedunderneath the central spout.

Clean the cup rim sensor at least oncea week and more often if heavily soiled.

Cleaning and care

58

Push the two locking catchestogether (see arrows).

The cup rim sensor will be released.

Clean the cup rim sensor in thedishwasher, or by hand using warmwater and a little washing-up liquidapplied with a soft cloth.

Push the cup rim sensor fromunderneath into the holder on thecentral spout to refit it.

Cleaning the milk flask with lidThe milk flask should be taken apartand cleaned every day after use.

Clean the lid and the glass by handusing warm water and a little washing-up liquid applied with a soft cloth.

Remove and empty the milk flask.

Rinse the milk pipework in the lidunder running water before placingthe lid of the milk flask in thedishwasher.

If water does not run out of theconnection piece , clean it with thecleaning brush.

Clean the glass flask.

Dry all parts and reassemble the milkflask.

Clean the milk flask holder on thecoffee machine with a damp cloth.

Cleaning and care

59

Cleaning the milk valve

The seal of the milk valve can bedamaged by sharp-edged objects orsimilar.Do not use sharp-edged objects, e.g.a knife, to clean the milk valve.

The milk valve is located under thebean container on the left-hand side.

Milk residues can accumulate on thestainless steel stem and dry on. Thesecrusts are difficult to remove. For thisreason, regular cleaning after makingdrinks with milk is important.


Clean the milk valve with a dampsponge or microfibre cloth.


Cleaning the bean containers

Damage due to incorrect useand cleaning.If the bean containers are immersedin water, it may result inmalfunctions. Parts may break offduring dismantling or mechanicalcomponents may not functioncorrectly after reassembly.Do not dismantle the beancontainers.Do not immerse the bean containersin liquids, e.g. washing-up liquidsolution.

Coffee beans contain oils which candeposit on the walls of the beancontainers and hinder the flow of thebeans. Therefore, clean the beancontainers regularly with a soft cloth.

If required, you can clean the lids of thebean containers by hand with warmwater and a little washing-up liquid. Drythe lids thoroughly before refitting themon the bean containers.


Remove the bean containers on theleft and right from the coffeemachine.

Clean the bean container chutes inthe machine.

Useful tip: Use a vacuum cleaner toremove any coffee grounds from theinterior of the machine.

Remove the lids and empty the beancontainers.

Cleaning and care

60

Do not remove the componentswhich assist the flow of beans (seearrow).

Clean the bean containers and theirlids by hand with a slightly dampcloth. Dry all parts thoroughly beforefilling the bean containers with coffeebeans again.

Refit the lids and push the beancontainers back into the coffeemachine.


Cleaning the interior, the insideof the appliance door and thedrip catcherClean the interior and the appliancefront during normal cleaning. Forexample, clean the area underneath thewater container when the watercontainer has been removed.

At the bottom of the inside of theappliance door there is a drip catcher.

Remove and empty the drip catcherregularly. The drip catcher isdishwasher-safe.


Remove and clean the drip catcher.

Remove all parts from the interior ofthe machine:

– Water container

– Drip tray

– Maintenance container

– Brew unit

– Bean container

Useful tip: Use your vacuum cleaner toremove dry ground coffee residues.

Cleaning and care

61

Clean the interior and the inside ofthe appliance door by hand with aslightly damp, clean sponge ormicrofibre cloth. Then dry the interiorand the appliance door with a softcloth.

Refit all parts, including the dripcatcher.


Cleaning the appliance front

If soiling is not removed promptly, itcould cause the surface to alter ordiscolour.Remove any soiling from the front ofthe appliance straight away.Make sure that water cannot getbehind the display.Clean the appliance front afterdescaling. Wipe up any spillages ofdescaling agent as soon as possible.

Useful tip: Open the appliance doorbefore cleaning the control panel. Thiswill avoid operating errors.

Clean the appliance front with aslightly damp, clean sponge or amicrofibre cloth. After cleaning, wipethe surfaces dry using a soft cloth.

Useful tip: You can also clean theappliance front with the Miele allpurpose microfibre cloth.

Maintenance programmesThe coffee machine has the followingmaintenance programmes:

– Rinse the appliance

– Rinse the milk pipework

– Cleaning the milk pipework

– Degrease the brew unit

– Descale the appliance

Carry out the relevant maintenanceprogramme when the prompt to do soappears in the display. You can alsostart maintenance programmes at anytime so that the coffee machine doesnot prompt mandatory cleaning at aninconvenient time.

Useful tip: To reduce the frequency ofthe drip tray needing to be emptied, youcan place the maintenance containerunder the central spout.

Opening the Maintenance menu

Touch the sensor.

You can now select a maintenanceprogramme.

Rinsing the applianceIf coffee has been dispensed, the coffeemachine will rinse the coffee pipeworkautomatically before switching off. Youcan also start Rinse appliance manually.

Rinsing the milk pipeworkIf you have prepared a drink using milk,the coffee machine will automaticallyrinse the milk pipework after a fewminutes. You can also start Rinse milkpipework manually.

Cleaning and care

62

Cleaning the milk pipeworkThe milk pipework must be cleaned atleast once a week.

The Clean milk pipework maintenanceprogramme lasts for approx.15 minutes.

The cleaning process cannot becancelled. It must be completedthrough to the end.

Touch the sensor.

Select Clean milk pipework and touchOK.

The process begins and variousmessages appear in the display.

Follow the instructions in the display.

When Fill water container with lukewarmwater and cleaning agent up to the symbol and insert. Close the door. appearsin the display, proceed as follows.

Making a cleaning solution:

For optimal cleaning results, werecommend the Miele Cleaning agentfor milk pipework. The Cleaning agent for milk pipeworkhas been specially developed for usewith Miele coffee machines andprevents subsequent damage.

It is available to order from the Mieleonline shop or directly from Miele (seethe end of this booklet for contactdetails).

Add 2 sachets of the Cleaning agentfor milk pipework to the watercontainer.

Fill the water container to the marker with lukewarm water andstir the solution.

Follow the instructions for the mixingratio of the cleaning agent. Fill thewater container with the correctamount of water. Cleaning willotherwise not be completed.

Insert the water container and closethe appliance door.


If prompted in the display, carefullyrinse out the water container withclean water. Ensure that no cleaningagent is left in the water container. Fillthe water container with tap water.

The cleaning process is finished whenthe drinks menu appears in the display.

Degreasing the brew unit andcleaning the interiorDepending on the natural oil content ofthe coffee used, the brew unit canbecome blocked quite quickly. It mustbe degreased regularly in order toensure aromatic coffee and trouble-freeoperation of the coffee machine.

Cleaning and care

63

We recommend using Miele CleaningTablets to clean the brew unit. Thesehave been specially developed for usewith Miele coffee machines and preventsubsequent damage. Miele Cleaning Tablets can be orderedvia the Miele webshop or directly fromMiele (see the end of this booklet forcontact details).

The maintenance programme fordegreasing the brew unit lasts forapprox. 11 minutes.

After 200 portions have beendispensed, Degrease the brew unit willappear in the display.


This message will appear repeatedlyuntil the brew unit is degreased.

Degreasing the brew unit

Touch the sensor.

Select Degrease the brew unit andtouch OK.

The maintenance programme will start.


Remove the water container and the brewunit. Clean the interior of the machine. Rinsethe brew unit by hand and refit in themachine with a tablet in it. appears in thedisplay.

Cleaning the brew unit and theinterior

The moving parts of the brew unitare lubricated. Cleaning agents willdamage the brew unit.Clean the brew unit by hand onlyunder warm running water. Do notuse washing-up liquid or any othercleaning agent.To ensure good tasting coffee and toprevent the formation of microbes inthe machine, remove and clean thebrew unit under running water once aweek.



Press the button under the handle ofthe brew unit and, whilst doing so,turn the handle to the front .

Cleaning and care

64

Pull the brew unit to the side firstand then tilt to the front . Pull thebrew unit forwards to remove it .

If you cannot remove the brew unit orcan only do so with difficulty, the brewunit is not in the correct position (See“Problem solving guide”).

When you have removed the brewunit, do not change the position ofthe handle on the brew unit.Otherwise the brew unit cannot berefitted.

Clean the brew unit by hand underwarm running water without usingwashing-up liquid or any othercleaning agent.

Wipe any remaining coffee residuesfrom the filters. One filter is located inthe funnel and the other to the left ofthe funnel.

Coffee powder falls onto the drip traywhen the brew unit is removed.

Remove the drip tray and clean thelid.

Clean the interior of the coffeemachine. Use your vacuum cleaner toremove dry ground coffee residues.

Adding a cleaning tablet to the brewunit

Drop a cleaning tablet into the top ofthe brew unit (arrow).

Push the brew unit with cleaningtablet back into the coffee machine.

Cleaning and care

65

Press the button under the handle ofthe brew unit and, whilst doing so,turn the handle to the rear .

Push the water container and the driptray, together with the wastecontainer, back into the coffeemachine.


Follow the further instructions givenin the display.

The cleaning process is finished whenthe drinks menu appears in the display.

Descaling the appliance

Risk of damage from spilt descalingsolution.Sensitive surfaces and/or naturalfloors can suffer damage.Wipe up any spillages of descalingagent immediately.

Limescale builds up in the coffeemachine through use. How often theappliance needs to be descaled willdepend on the water hardness level inyour area. Limescale must be removedregularly.

The appliance will guide you throughthe descaling process. Variousmessages will appear in the display,e.g. you will be prompted to empty thedrip tray or fill the water container.

The descaling process is essential andtakes approx. 20 minutes.

The coffee machine prompts you whenit needs to be descaled. The remainingnumber of drinks that can be madebefore descaling will appear in thedisplay after each drink.


When the number of remaining portionsreaches 0, the appliance will lock out.

You can switch the coffee machine off ifyou do not want to carry out thedescaling programme at this point.However, you cannot make any drinksuntil the machine has been descaled.

Descaling after prompt appears inthe display

Descale appliance appears in the display.

Descaling cannot be cancelled once ithas started. It must be completedthrough to the end.


The process will start.


When Fill the water container with descalingagent and lukewarm water up to the symbol and replace. Close the doorappears in the display, proceed asfollows.

Cleaning and care

66

Creating the descaling solution

We recommend using Miele descalingtablets for optimum results.These have been specially developedfor use with Miele coffee machines andprevent subsequent damage.

Other descaling agents, whichcontain other acids besides citricacid and/or other undesirablesubstances, such as chlorides forexample, could damage the coffeemachine. Moreover, the descalingeffect required cannot be guaranteedif the descaling solution is not of theappropriate concentration.

Miele descaling tablets are available toorder via the Miele webshop or directlyfrom Miele (see the end of this bookletfor contact details).

You will need 2 descaling tablets for thedescaling process.

Fill the water container to themarker with lukewarm water.

Add 2 Miele descaling tablets to thewater container.

Follow the instructions for the mixingratio carefully. Fill the water containerwith the correct amount of water.Descaling will otherwise not becompleted.

Carrying out descaling

Push the water container back intothe machine.

Follow the further instructions givenin the display.

When Rinse and insert the water container.Close the door appears in the display:

Remove the water container andrinse it thoroughly with clean water.Ensure that no descaling solutionresidue remains in the watercontainer. Fill the water container withtap water.

The descaling process has finishedwhen the drinks menu appears in thedisplay.

Problem solving guide

67

With the help of the following guide, minor faults in the performance of theappliance, some of which may result from incorrect operation, can be remediedwithout contacting Miele. This will save you time and money because you won'tneed a service call.

Please note that a call-out charge will be applied to unnecessary service visitswhere the problem could have been rectified as described in these operatinginstructions.

Messages in the display

Error messages must be confirmed with OK. Otherwise the message mayreappear in the display even though the problem has been remedied.

Follow the instructions which appear in the display to remedy the problem.

If the fault message appears again in the display, contact Miele.

Problem Possible cause and remedy

F1, F2,F80, F82,F353, F354

There is an internal fault. Switch the coffee machine off. Wait for

approximately one hour before switching themachine back on again.

F74, F77F225, F226F235, F353, F354

There is an internal fault. Switch the coffee machine off. Wait for

approximately 2 minutes before switching themachine back on again.


68


F73 orCheck the brew unit

The brew unit cannot be positioned correctly or it isdirty. Coffee powder cannot be pressed. Check whether you can remove the brew unit. When you are able to remove the brew unit, rinse it

under running water.

Push the coffee ejector of the brew unit into thecorrect position (see diagram).

Do not insert the brew unit. Insert the watercontainer and close the appliance door. Switch thecoffee machine on.

This will initialise the brew unit motor and put it backinto the start position. When Insert the brew unit appears in the display,

open the appliance door and put the brew unitback in the machine. Close the appliance door.

If you are unable to remove the brew unit, switchoff the coffee machine. Wait forapproximately 2 minutes before switching themachine back on again.

A maintenanceprogramme is cancelledearly and Push the watercontainer in until it engagesappears in the display.

The water container was not correctly filled andrefitted. Check that you have filled to the correct marker.

The symbols on the water container indicate therequired water level for the Descale appliance: and Clean milk pipework: maintenance programmes. Fill the water container to the marker and start the

process again.


69


F233 The cup rim sensor is not inserted or is incorrectlyinserted.If the central spout is moving upwards and the cuprim sensor is bumped, e.g. with a cup, the cup rimsensor loses its reference position. Confirm the message with OK. Refit the cup rim sensor.

Cup detection is deactivated until the next time thecoffee machine is switched on and the central spoutremains in the highest position. Cup detection isinitialised again the next time the machine is switchedon.


70

Unusual performance of the coffee machine


The display remainsdark when the coffeesystem is switched onwith the On/Off sensor.

The On/Off sensor was not touched for longenough. Touch and hold the On/Off sensor for at least

3 seconds.The plug is not properly inserted into the socket. Insert the plug into the socket correctly.

The mains fuse has tripped because the coffeemachine, mains voltage or another appliance isdefective. Switch off at the wall socket and remove the plug. Contact a qualified electrician or Miele.

The lighting remains offafter the coffeemachine is switched on.

The lighting has been switched off. Switch the lighting on (see “Settings - Lighting”).

The lighting is faulty. Call Miele.

The coffee machinedoes not react tooperating the display.

There is a fault. Touch and hold the On/Off sensor until the

display switches off and the appliance restarts.

The coffee machineswitches off suddenly.

The switch-off time programmed using the timer hasbeen reached. If required, you can select a new switch-off time

(see “Settings - Timer”).The plug is not correctly inserted into the socket orthe socket is not switched on. Insert the plug into the socket correctly and switch

on.

The sensors do notrespond to touch.The appliance cannotbe operated.

There is an internal fault. Disconnect the electricity supply by switching off

at the wall socket and withdrawing the plug, orswitching off the mains circuit breaker.

A fan can be heard eventhough no drinks arebeing prepared and thecoffee machine isswitched off.

This is not a fault.The fan in the appliance will continue to run afterdispensing a drink or for approx. 30 minutes afterswitching off the appliance.


71


The brew unit cannot beremoved.

The brew unit is not in the correct position. If necessary, move the handle on the brew unit

back to the start position. Close the appliancedoor.

Switch the coffee machine off. Wait approx. one minute before switching on the

coffee machine.

This will initialise the brew unit motor and put it backinto the start position. If necessary, repeat these steps.

Drink preparation iscancelled prematurelyeven though a cup orglass is located underthe central spout.

This is not a fault.If the opening of the cup or glass is so wide, e.g. aswith a large mug, that the cup rim sensor cannotdetect the rim, the drink is cancelled. Use a differentcup or glass, or position it in such a way that its rimcan be detected.

The coffee machinedoes not switch itselfon, although the Switchon at setting has beenactivated for the timer.

The system lock has been activated. Deactivate the system lock.

The current day of the week has not been selected. Check the timer settings and change these if

necessary.The machine was not used after being switched onautomatically three times in succession (holidaymode). Switch the machine on and dispense a drink.

You are preparing hotwater or tea and insteadof water, steam isdispensed.

The altitude is possibly set incorrectly. Change the altitude setting (Settings Altitude). You can also change the temperature settings if

necessary (Parameters).

The display is hard tosee or not able to beread.

The display brightness is set too low. Change this setting.

The display lights upbut the coffee machinedoes not heat up and nodrinks are made.

The Demo mode of the coffee machine forshowrooms has been activated. Deactivate the Demo mode (see “Settings - Demo

mode”).


72

Unsatisfactory results


The coffee is not hotenough.

The cup has not been pre-heated.The smaller the cup and the thicker its walls, the moreimportant it is to pre-heat it.

Pre-heat the cup, for example with hot water.

The brewing temperature has been set too low. Set a higher brewing temperature.

The filters in the brew unit are blocked. Remove the brew unit and clean it by hand. Degrease the brew unit.

The coffee grindermakes a louder noisethan usual.

The coffee bean container has become empty duringthe grinding process. Fill the coffee bean container with fresh beans.

There may be foreign objects such as plastic orstones in amongst the coffee beans. Switch the coffee machine off immediately. Call

Miele.

The coffee flows tooquickly into the cup.

The coffee is too coarsely ground. Set the grinder to a finer setting.

The coffee trickles tooslowly into the cup.

The coffee is too finely ground. Set the grinder to a coarser setting.

The crema on thecoffee or espresso isnot as it should be.

The grinder setting is not correct. Set the grinder to a finer or coarser setting.

The brewing temperature is too high for the type ofcoffee being used. Set a lower brewing temperature.

The coffee beans are no longer fresh. Add fresh coffee beans to the coffee bean

container.


73


The coffee tastes weak.The coffee grounds inthe waste container aresludgy and grainy.

Insufficient coffee beans are getting into the grinderand less coffee is being brewed.Have you used a dark roast?This type of coffee bean is often oily. These oils cancling to the inside of the coffee bean containers andhinder the flow of beans.Are you using a type of coffee with very large beansor different sized beans?The beans are possibly getting wedged or jammedand forming “bean bridges”. Clean the coffee bean containers more often if you

are using darker, more oily coffee beans. Pull the bean containers out a little and shake

them if you are using coffee with very large beansor different sized beans.

Trying using a different type of coffee.

Coffee is not beingdispensed from bothspouts evenly. Milk maybe sputtering whenbeing heated up.

Coffee deposits in the central spout are obstructingdispensing. Dismantle the central spout and clean the parts -

except for the stainless steel cover - in thedishwasher.This cleaning process should be carried out oncea week.

The consistency of themilk froth isunsatisfactory.

The milk temperature is too high. Good milk froth canonly be achieved with cold milk (below 10 °C). Check the temperature of the milk in the milk flask.

The milk valve is blocked and/or dirty. Follow the instructions in “Cleaning the milk valve”.


74

Cleaning the milk valveWhen preparing milk, if hot milk isdispensed instead of milk froth, or themilk spits or sputters when dispensed,the milk valve may be blocked. Firstcheck the following:

– Is the milk in the milk flask cold(< 10 °C)?

– Have the central spout and the milkflask lid been cleaned carefully?

– Is the central spout correctly fitted?

– Is the milk pipework firmly connectedto the dispensing unit?

If you are still not satisfied with milkpreparation, follow the steps describedbelow to clean the milk valve.

Clean the milk valve cover by handonly.


Remove the bean container on theleft and the maintenance container.

Remove the stainless steel coverfrom the central spout.

Remove the milk valve cover: on thetop right there is a pin which enablesyou to swing open the cover.

1

23

Release the milk pipework from thedispensing unit on the centralspout and from the holders and on the milk valve.

Remove the milk pipework thatconnects the milk valve to the centralspout.

Disconnect the angular mouldedhose and the curved hose from oneanother. Rinse the hoses thoroughlyunder running water.

Do not remove the connection piecesfrom the hoses.


75

Push the catches on the left and rightof the milk valve holder and pull theholder forwards to remove.

Dismantle the holder and the siliconeseal.

Lift out the stainless steel stem.

Clean the individual parts of the milkvalve in the dishwasher.

Useful tip: If dried on milk residues arelocated on the front side, soak thestainless steel stem in warm water witha little washing-up liquid before placingit in the dishwasher.

Fitting the milk valve

Slide in the stainless steel stem fromabove.

Fit the silicone seal in the milk valveholder.

Fit the holder with the silicone sealuntil it clicks into position.


76

Connect the angular moulded hose tothe longer milk pipework. Firstly fitthe moulded hose at the top on thecentral spout. The black connectionpiece should point towards the rear.

Connect the lower end of themoulded hose to the dispensing uniton the central spout.

Insert the milk pipework into the milkvalve on the left and right-hand sides.

Check whether the milk pipework sitscomfortably against the housing andthe cover is easy to refit.

Useful tip: If necessary, turn the milkpipework on the right towards the back.

Fit the milk valve cover: to do this,place the pin in the top right cornerand swing the cover towards the rearuntil it closes flush.

Refit the bean container on the leftand the maintenance container in thecoffee machine. Refit the centralspout stainless steel cover


After sales service and warranty

77

After sales serviceIn the event of a fault which you cannotcorrect yourself, please contact Miele.

The contact details for Miele are givenat the back of these instructions.

When contacting Miele, please quotethe model and serial number of yourcoffee machine.These can be found on the data plate:

WarrantyThis appliance has a manufacturer'swarranty period of 2 years.

For further information, please refer toyour warranty booklet.

Accessories

78

These products and other usefulaccessories can be ordered via theMiele webshop or directly from Miele(see back cover for contact details).

– Original Miele all purposemicrofibre clothFor removing finger marks and lightsoiling

– Cleaning agent for milk pipeworkFor cleaning the milk system

– Cleaning tabletsFor degreasing the brew unit

– Descaling tabletsFor descaling the water pipework

Installation

-

INSTALLATION-

79

Electrical connectionBefore connecting the appliance, makesure that the connection data on thedata plate (voltage and frequency)matches the mains electricity supply.This data must correspond in order toavoid the risk of damage to theappliance. If in any doubt, consult aqualified electrician.

The necessary connection informationis given on the data plate inside yourappliance.

The fuse rating must be at least 10 A.

The socket must be easily accessible. Ifthe socket is no longer accessible afterinstallation, an additional means ofdisconnection must be provided for allpoles. Suitable means of disconnectioninclude switches with an all-polecontact gap of at least 3 mm. Theseinclude isolator switches, circuitbreakers and relays.

Do not connect the machine to aninverter. Inverters are used forautonomous power supply, e.g. a solarpower system. When switched on, peakloads in the system can cause thesafety switch-off mechanism to betriggered. This may damage theelectronic unit.

The machine must not be used with so-called energy saving plugs. Thesereduce the amount of energy suppliedto the machine, causing it to overheat.

Installation

-

INSTALLATION-

80

Building-in dimensions

Installation in a tall unit

A minimum installation height of 850 mm must be maintained.

All dimensions are indicated in mm.

Combination with other Miele built-in appliances is possible. If the coffee machineis to be built in above another appliance, there must be a full-width, closed shelfbetween them. When built in above a warming drawer, a closed shelf is notneeded.

Installation

-

INSTALLATION-

81

Installation and connections

All dimensions are indicated in mm.

a Mains connection cable

b Do not place electrical connection in this area

Installation

-

INSTALLATION-

82

Building in the coffee machine

Danger of injury due to incorrectinstallation.Personal injury can result from anincorrectly installed, and thereforeunsecured, appliance.The coffee machine can only beoperated once it has been built in.

Risk of damage to property dueto incorrect operation.If the ambient temperature range isnot complied with, the coffeemachine may not function correctly.The coffee machine may only beoperated in an ambient temperaturerange between +16 °C and +38 °C.

A minimum installation height of850 mm must be maintained.Ensure that a door opening angle of120° is present so that the beancontainer on the left can beremoved.

Check whether there is a gap of at least299 mm between the wall or similar andthe coffee machine so that the door can

be opened wide enough to remove thebean container on the left (minimumdoor opening angle of 120°).

A TX 20 screwdriver is required forinstallation.

Useful tip: We recommend providing aplace to sit the coffee machine which isthe same height as the building-inniche. This will make it easier toconnect the machine to the electricitysupply.

Connecting to the mains electricitysupply

Observe the instructions in“Electrical connection”.

Connect the coffee machine to themains electricity supply.

Pushing in and levelling the coffeemachine

Ensure the mains connection cabledoes not get jammed or damagedwhen pushing the appliance into theniche.

Push the coffee machine all the wayinto the building-in niche.

Check the height of the coffeemachine to make sure that it is sittingcentrally in the niche and that it islevel. If this is not the case, realignthe machine using the four feet.

Do not adjust the door hinges toalign the coffee machine. This couldresult in the milk flask not being ableto be fitted correctly and milkpreparation may not functionproperly.

Installation

-

INSTALLATION-

83

2 TX 20 screws (25 mm) are supplied.

Secure the coffee machine to the sidewalls of the housing unit using thescrews supplied. Tighten the screwsby hand.

Useful tip: You can remove the dooropening limiters and increase the dooropening angle to 170° so that the screwon the left can be screwed in moreeasily. (see “Door opening limiters”).Check whether there is enough roomand that the appliance door does not hitan adjacent wall.

Check the operation of the coffeemachine.

Door opening limitersThe door hinges of the coffee machineare equipped with door opening limitersthat limit the opening angle of theappliance door to approx. 120°. Theseprevent the appliance door from hittingan adjacent wall when opened andbeing damaged.

You can remove the door openinglimiters to increase the opening angle toapprox. 170°. This allows the beancontainers to be removed more easily,for example.

Removing the door opening limiters

Check whether there is enough roomand that the appliance door does nothit an adjacent wall when the dooropening angle is increased.

Remove the door opening limitersfrom the hinges by levering them outwith a screwdriver, for example.

The door opening angle is nowincreased to approx. 170°.

www.miele.com.au

Miele Experience Centre and Head Office Melbourne:1 Gilbert Park DriveKnoxfield, VIC 3180

Miele Experience Centre South Melbourne:206-210 Coventry StreetSouth Melbourne, VIC 3205

Miele Experience Centre and Office Sydney:3 Skyline PlaceFrenchs Forest, NSW 2086

Miele Experience Centre and Office Brisbane:Tenancy 4C, 63 Skyring TerraceNewstead, QLD 4006

Miele Experience Centre and Office Perth:

83-85 Sir Donald Bradman DriveHilton, SA 5033

205-207 Stirling HighwayClaremont, WA 6010

Miele Experience Centre and Office Adelaide:

Miele Australia Pty. Ltd.

Miele New Zealand Limited

Level 2, 10 College HillFreemans Bay, Auckland 1011

Miele Experience CentreAuckland:8 College HillFreemans Bay, Auckland 1011Telephone:0800 464 353 (0800 4 MIELE)www.miele.co.nz

Miele Global HeadquartersGermanyMiele & Cie. KGCarl-Miele-Straße 2933332 GüterslohFederal Republic of Germany

Head Office:

IRD 98 463 631

ACN 005 635 398ABN 96 005 635 398

Miele Experience Centre Gold Coast:131 Ferry RoadSouthport, QLD 4215

M.-Nr. 11 201 430 / 02en – AU, NZ

CVA 7440

Date post:	05-Oct-2020
Category:	Documents
Upload:	others
View:	1 times
Download:	0 times

Operating and installation instructions Built-in coffee ... · Green coffee beans are very hard and...

Documents