Microsoft Word - Operation BTU-100S Manual.docX-Lite
Stanaphone
Firefly
eyeBeam
ICQPhone
If X-Lite has benn choosed ,below will be shown:
After the Xlite is running, the software would show "X-Lite is running."
If the X-Lite isn't active on the screen ,just press any DTMF key of the USB phone(such as
0-9 , * , #) , X-Lite Will come to the foreground and pressed key will be sent to X-Lite at
the same time.
After you have finished the telephone number'keys, press the green dial key on the USB
phone,then X-Lite will dial the number automatically..After the call,press the red hangup
key on the USB phone and then X-Lite will hangup.
StanaPhone
If StanaPhone has benn choosed ,below will be shown:
After the StanaPhone is running, the software would show "StanaPhone is running."
If the StanaPhone isn't active on the screen ,just press any DTMF key of the USB
phone(such as 0-9 , * , #) , StanaPhone Will come to the foreground and pressed key will
be sent to StanaPhone at the same time.
After you have finished the telephone number'keys, press the green dial key on the USB
phone,then StanaPhone will dial the number automatically.
After the call,press the red hangup key on the USB phone and then StanaPhone will
hangup.
If SJphone has benn choosed,below will be shown:
After the SJphone is running, the software would show "SJphone is running."
If the SJphone isn't active on the screen ,just press any DTMF key of the USB
phone(such as 0-9 , * , #) , SJphone Will come to the foreground and pressed key will
be sent to SJphone at the same time.
After you have finished the telephone number'keys, press the green dial key on the
USB phone,then SJphone will dial the number automatically..After the call,press the
red hangup key on the USB phone and then SJphone will hangup.
Net2Phone Dialer
If Net2Phone Dialer has benn choosed,below will be shown:
After the Net2Phone Dialer isn't running, the software would show "Net2Phone Dialer
is not running.".
If the Net2Phone Dialer isn't active on the screen ,just press any DTMF key of the
USB phone(such as 0-9 , * , #) , Net2Phone Dialer Will come to the foreground and
pressed key will be sent to Net2Phone Dialer at the same time.
After you have finished the telephone number'keys, press the green dial key on the
USB phone,then Net2Phone Dialer will dial the number automatically.. After the
call,press the red hangup key on the USB phone and then Net2Phone Dialer will
hangup.
After the Net2Phone Communicator isn't running, the software would show
"Net2Phone Communicator is not running.".
If the Net2Phone Communicator isn't active on the screen ,just press any DTMF key
of the USB phone(such as 0-9 , * , #) , Net2Phone Communicator Will come to the
foreground and pressed key will be sent to Net2Phone Communicator at the same
time.
After you have finished the telephone number'keys, press the green dial key on the
USB phone,then Net2Phone Communicator will dial the number automatically..After
the call,press the red hangup key on the USB phone and then Net2Phone
Communicator will hangup.
MSN Messenger
AttentionThe software can be used only if the MSN messenger is opened. Below is
the show. If the MSN messenger exists only with the Icon, you can't use the software
dialer.
If MSN messenger has benn choosed,below will be shown:
If the MSN Messenger is not running, the software would show "MSN Messenger is
not running."
If the MSN Messenger's main interface has been opened and it isn't active on the
screen ,press the green key in the USB phone, the MSN Messenger will come to the
screen.
In the upper state, press the green key in the usb phone, the dialog will be popped up
as folloing:
You can use the function key 1 or function key 2 to choose the people you want to
dial. Press the green key to dail. If you want to close the window,just press the red
key.
The dial page is as below:
If you want to finish the call ,please press the red key.
If you want to receive the MSN call, press the green key. hang up way as before.
X-PRO (including Vonage and Engin version
If X-PRO has benn choosed ,below will be shown:
After the X-PRO is running, the software would show "X-PRO is running."
If the X-PRO isn't active on the screen ,just press any DTMF key of the USB
phone(such as 0-9 , * , #) , X-PRO Will come to the foreground and pressed key will
be sent to X-PRO at the same time. To clear the inputted DTMF keys,just press the
function key 1.
After you have finished the telephone number'keys, press the green dial key on the
USB phone,then X-PRO will dial the number automatically..
After the call,press the red hangup key on the USB phone and then X-PRO will
hangup.
Firefly
If Firefly has benn choosed ,below will be shown:
After the Firefly is running, the software would show "Firefly is running."
If the Firefly isn't active on the screen ,just press any DTMF key of the USB
phone(such as 0-9 , * , #) , Firefly Will come to the foreground and pressed key will
be sent to Firefly at the same time. To clear the inputted DTMF keys,just press the
function key 1.
After you have finished the telephone number'keys, press the green dial key on the
USB phone,then Firefly will dial the number automatically..After the call,press the red
hangup key on the USB phone and then Firefly will hangup.
eyeBeam
If eyeBeam has benn choosed ,below will be shown as:
After the eyeBeam is running, the software would show "eyeBeam is running."
If the eyeBeam isn't active on the screen ,just press any DTMF key of the USB
phone(such as 0-9 , * , #) , eyeBeam Will come to the foreground and the pressed key
will be sent to eyeBeam at the same time.
After you have finished the telephone number'keys, press the green dial key on the
USB phone,then eyeBeam will dial the number automatically..After the call,press the
red hangup key on the USB phone and then eyeBeam will hangup.
ICQ Phone
If ICQ Phone has benn choosed,below will be shown:
Please make sure ICQ Phone's main windows has already been popped out as
following:
OtherWiare, the software would show "ICQ Phone is not running.".
If the ICQ Phone isn't active on the screen ,just press any DTMF key of the USB
phone(such as 0-9 , * , #) , ICQ Phone Will come to the foreground and pressed key
will be sent to ICQ Phone at the same time.
After you have finished the telephone number'keys, press the green dial key on the
USB phone,then ICQ Phone will dial the number automatically..
After the call,press the red hangup key on the USB phone and then ICQ Phone will
hangup.
If Yahoo Call Center has benn choosed,below will be shown:
Please make sure Yahoo Call Center's main windows has already been popped out as
following:
OtherWiare, the software would show "Yahoo Call Center is not running.".
If Yahoo Call Center isn't active on the screen ,just press any DTMF key of the USB
phone(such as 0-9 , * , #) ,Yahoo Call Center Will come to the foreground and pressed
key will be sent to Yahoo Call Center at the same time.
After you have finished the telephone number'keys, press the green dial key on the
USB phone,then Yahoo Call Center will dial the number automatically..After the
call,press the red hangup key on the USB phone and then Yahoo Call Center will
hangup.
If AIM Phone has benn choosed,below will be shown:
Please make sure AIM Phone's main windows has already been popped out as
following:
OtherWiare, the software would show "AIM Phone is not running.".
If AIM Phone isn't active on the screen ,just press any DTMF key of the USB
phone(such as 0-9 , * , #) ,AIM Phone Will come to the foreground and pressed key
will be sent to AIM Phone at the same time.
After you have finished the telephone number'keys, press the green dial key on the
USB phone,then AIM Phone will dial the number automatically..After the call,press