1. Front 45 Degree Backward 45 Degree Normal 0 DegreePlugged able Function

2. Concept Generating Concept Screening Priminary Design Evaluation And Improvement Prototyping and Final Design 3. Ecocycle Fan Fans Blade Fans Stand Holder Fans Usb Plug Fans Out Looking Umbrella Holder CDs TVs Connector Super GlueDuct Tape Portable Fan Scissor and Plier CDs Scissor Candle and Cork Usb Hub Scissor and Plier Music DIY Box Screwdriver Set 4. Materials Using In Type 01 5. TYPE 01 Step 1 : Draw four line in the CD with ruler and pencil Step 2 : Follow the Line that you have draw, cut the CD with scissors Step 3 : Take a cork and inside it into the hole of the CD FINISHED GOOD 6. Materials Using In Type 02 7. Step 1 : Use scissors and pliers force open the body of the old portable fan Step 2 : Take out the component needed to made the fan TYPE 02 FINISHED GOOD 8. Materials Using In Making Standing Holders 9. Step 1: Use Elephant Glue to Stick four CDs Into One Step 2: Use Duct Tape Stick In The Middle Of The CD (The Back Side) And Put The TVs Connector In The Middle Of the CD (Front) FINISHED GOOD 10. Materials Using In Making Connection With The USB Plug 11. Step 1: Get The USB Line from the materials prepared Step 2: Cut the wire except red and black color Step 3: Stick the USB Line with the Motor and Stick then In The Holder FINISHED GOOD 12. Materials Using In Making The Out Looking 13. FINISHED GOOD THROWABLE RUBBISH Step 1&2: Open The Music Box and Take out the unusable item 14. Before After Features