The RTX Smart ATE is a highly competitive and cost/time efficient test solution for functional test in the production of wireless devices. The Smart ATE reduces the complexity and size of the ATE system through the inclusion of modular instrumentation internal to the test unit. The flexible nature of the Smart ATE enables a swift physical reconfiguration - in literally a matter of seconds, it can be reconfigured to accommodate different products and test types.
RTX Telecom A/S introduces the Smart ATE, a highly optimized automated test solution for production of wireless devices.
The Smart ATE is a multipurpose solution to simplify and cost-reduce the production test environment dramatically compared to traditional "rack and stack" wireless test implementations. This new compact platform is intended for wireless device calibration and functional test (including DECT, GSM, WiFi, Bluetooth™, etc.) and integrates numerous test components. The design of the Smart ATE is based on the extensive experience RTX has gained though the development and installation of automated test equipment (ATE) systems over the past 10 years.
The Smart ATE can be used for printed circuit board (PCB) as well as final product testing. It features a customization area that enables the interconnection between internal and external measurement functionality and the device under test (DUT), reducing both space requirements and complexity for the total test system. The flexibility of the Smart ATE simplifies the customization of the test platform, and enables economical replication. A production test system can be implemented by using an Smart ATE in combination with an RF communication tester (such as the RTX2011 DECT/CAT-iq RF Tester or Agilent 8960) and a PC for executing the test application.
RTX 2300 SMART ATE
RTX TELECOM A/S • STROEMMEN 6 • DK-9400 NOERRESUNDBY • DENMARK • PHONE: +45 9632 2300 • WWW.RTX.DK • [email protected]
RTX AMERICA, INC • 2025 GATEWAY PLACE • SUITE 202 • SAN JOSE • CA • 95110 • USA • PHONE: +1 (408)441-8600
RTX
2300
SMARTATE
DAT
ASH
EET
V3
OPTIONS AND ORDERING DETAILS - SMART ATE
RTX no. RTX2300 Description Std./Opt.95102300 RTX2300 basic unit Basic RTX2300 unit with USB control interface, standard modules, shielded
lid and fixture bay.Standard
95102310 RTX2300 basic unit w/o shield
Basic RTX2300 unit with USB control interface, standard modules, NO shielded and fixture bay.
Option
RTX no. Instrumentation Description95203194 Programmable PSU Modular programmable PSU with external sense for supplying the DUT in
the RTX2300 and is capable of supplying 0-10V 2A or 10-15V 1A.Option
95203195 Frequency counter 50MHz / 1 ppm
Modular frequency counter for DUT freq. measurements in the RTX2300 and is capable of measuring frequency up to 50Mhz. Including reference clock In/Output.
Option
95203196 High Stability Frequency counter 50MHz / 0.1 ppm
Modular frequency counter for DUT freq. measurements in the RTX2300 and is capable of measuring frequency up to 50Mhz. High stability reference oscillator. Including reference clock In/Output.
Option
95203197 Battery simulator Battery simulator for stimulating the charger circuitry on the DUT. Programmable sink current.
Option
95203198 RF Switch 4 RF switch with 4 channels. Option
95203199 RF Switch 8 RF switch with 8 channels. Option
RTX no. DUT Interface Description Std./Opt.Included USB USB interface to DUT. Standard
Included UART UART w. level converter to DUT Standard
95203207 SPI SPI interface to DUT Option
95203208 I2C I2C interface to DUT Option
RTX no. Rear panel Description Std./Opt.Included RF connection RF connection from Fixture bay to rear panel. Standard
95203200 RJ 45 RJ 45 connection from rear panel and to fixture bay. Option
RTX no. Fixture interface Description Std./Opt.95203201 Quick swap kit
(SC+CC)Quick swap kit for "Standard Connector Block" and "Custom Connector Block" in Fixture bay.
Option
RTX no. Fixture kits Description Std./Opt.95203202 Standard fixture kit.
Pneu. cylinder Ø6Standard fixture kit with all base materials for a fixture and including Ø6 pneumatic cylinder.
Option
95203203 Standard fixture kit. Pneu. cylinder Ø8
Standard fixture kit with all base materials for a fixture and including Ø 8 pneumatic cylinder.
Option
95203204 Standard fixture kit. Pneu. cylinder Ø12
Standard fixture kit with all base materials for a fixture and including Ø12 pneumatic cylinder.
Option
95203205 Standard fixture kit No pneu. Cylinder.
Standard fixture kit with all base materials for a fixture. Option
95203206 Quick swap kit (SC+CC)
Quick swap kit for "Standard Connector Block" and "Custom Connector Block" on Fixture.
Option * EZU is accredited calibration, repair center & authorized distributor of RTX
INDONESIA 印尼
ISO 9001 : 2008Certificate No.: FS 95776
1/F, 206 Choi Hung Road, Kowloon, Hong Kong香港九龍彩虹道2 0 6號1樓Tel: (852) 2666 2000 Fax: (852) 3010 1010Email: [email protected]
儀 租 科 技 有 限 公 司
儀 租 有 限 公 司
EZU TECHNOLOGIES LTD
EZU RENTALS LTD
EZU RENTALS INC儀 租 亞 洲 有 限 公 司6F-17, No.14, Lane 609, Sec 5, Chongxin Road, Sanchong District, New Taipei City 241,Taiwan241 新北市三重區重新路五段609巷14號6樓之17 Tel.: (886) 2 2999 7111 Fax: (886) 2 8192 6666
CHINA 中國
Tel: (86) 755 8267 7732Mobile: Fax: (86) 755 3397 5323
(86) 150 1253 3333Tel: (62) 21 6220 0801Mobile: Fax: (62) 21 6220 0801
(62) 816 187 9188
w w w . 1 1 1 2 2 2 3 3 3 . c o m
RTX2300 SMART ATE RTX2300 SMART ATE
Customization area
Instrumentationarea
Quick swap conn.
Standardconn.
SMART ATE MAIN BLOCKS REAR PANEL AND CUSTOMIZATION AREA
The rear panel provides the connection to the external equipment, pneumatics and the Smart ATE power unit. The 25 pin Dsub providesthe connection to addition external measurement equipment.
FIXTURE BAY
The fixture bay is prepared with the interfaces to the Smart ATE functionalities and external RF equipment. The signal lines arefiltered and can be accessed either at the standard connectors in the bottom part of the fixture bay or the optional Quick Swap connectors.
The Smart ATE reduces the complexity, size, and cost of the ATE system through the inclusion of modular instrumentation internal to the test unit, including a digital volt meter, tone generator, and signal multiplexer. Optional internal instrumentation includes a programmable power supply, battery simulator, and high stability frequency counter. These components allow for the calibration and test of the baseband and audio portions of a DUT without the need for additional external equipment. The RF shielded compartment of the Smart ATE can be customized with a device-specific probe fixture, including a pneumatic capture unit to automatically hold the DUT in place during test.
The Smart ATE can decrease overall product test time since it has been designed to allow several units to be set up inparallel, enabling optimal use of RF, baseband, and acoustic test resource, and effectively reducing the handling time of the DUTs. In addition, the Smart ATE can streamline the manufacturing process, since in literally a matter of seconds, it can be physically reconfigured to accommodate different products and test types.
DVM
Audio generator
Signal multiplexer
GPIO
Option: PSU
Option: Frequency counter
Options: New/Customer modules
Cus
tom
izat
ion
area
Con
trolle
r
Shielded fixture area
Instrumentation (Basic unit)DVM +/- 10V DC
12 bit resolution8 channels+/- 5V AC p-p
Tone generator 50 Hz -14 KHz1 output: 3,5V RMS 2 outputs: 1V RMS
Signal multiplexer 8 Channels
GPIO 16 GPO8 GPI2 DAC
Interfaces (Basic unit)USB to DUT (1) USB
USB to DUT (2) UARTAuto level detection
Instrumentation (Options)PSU w.sense 0-10V 2A / 10-15V 1A
10 mV stepCurrent measurement 2A DC and peak.Current limiter 0-2 A
Frequency counter 50 MHz 1ppm**Internal reference.Imp. 50 Ohm / High.
Frequency counterHigh stability
50 MHz 0,1ppm**Internal reference.Imp. 50 Ohm / High.
Rear-panel (Basic unit)RTX2300control interface
USB 2.0
Clock IN/OUT 10 MHz 50Require Frequency counter moduleis installed.
RF IN/OUT 50 ?10 MHz – 2.5 GHZ
External equipment 25 pin D-sub
RTX2300 supply + 12 V
External DUT supply 2 source + 2 sense
Pneumatic SMC KK4-series quick coupling
General data (Basic unit)Isolation 60 dB (typically)
Max DUT size 200*150 mm
Pneumatic 6 bar
Operatingtemperature range
+15 C to + 35 C
Storagetemperature range
20 C to + 60 C
Operating humidity Up to 95% relative humidity at40 C (non-condensing)
Power supply 100 V to 250 V AC50 Hz to 60 Hz
Power consumption Typical: 5 – 10 WMaximum: 60 W
Dimensions(WxHxD)
300 mm x 315 mm x 516 mm
Weight 8.0 kg (Basic unit)