Oracle® Communications ASAP Cartridge 1.0 for CISCO_BTS_10200_4_4_EMS_1_0 CartridgeCISCO_BTS_10200_4_4_EMS_1_0 Cartridge Guide
First Edition
April 2011
CISCO_BTS_10200_4_4_EMS_1_0 Cartridge Guide, First Edition
Copyright © 2011 Oracle and/or its affiliates. All rights reserved.
This software and related documentation are provided under a license agreement containing restrictions on use and disclosure and are protected by intellectual property laws. Except as expressly permitted in your license agreement or allowed by law, you may not use, copy, reproduce, translate, broadcast, modify, license, transmit, distribute, exhibit, perform, publish, or display any part, in any form, or by any means. Reverse engineering, disassembly, or decompilation of this software, unless required by law for interoperability, is prohibited.
The information contained herein is subject to change without notice and is not warranted to be error-free. If you find any errors, please report them to us in writing.
If this software or related documentation is delivered to the U.S. Government or anyone licensing it on behalf of the U.S. Government, the following notice is applicable:
U.S. GOVERNMENT RIGHTS Programs, software, databases, and related documentation and technical data delivered to U.S. Government customers are "commercial computer software" or "commercial technical data" pursuant to the applicable Federal Acquisition Regulation and agency-specific supplemental regulations. As such, the use, duplication, disclosure, modification, and adaptation shall be subject to the restrictions and license terms set forth in the applicable Government contract, and, to the extent applicable by the terms of the Government contract, the additional rights set forth in FAR 52.227-19, Commercial Computer Software License (December 2007). Oracle USA, Inc., 500 Oracle Parkway, Redwood City, CA 94065.
This software is developed for general use in a variety of information management applications. It is not developed or intended for use in any inherently dangerous applications, including applications which may create a risk of personal injury. If you use this software in dangerous applications, then you shall be responsible to take all appropriate fail-safe, backup, redundancy, and other measures to ensure the safe use of this software. Oracle Corporation and its affiliates disclaim any liability for any damages caused by use of this software in dangerous applications.
Oracle is a registered trademark of Oracle Corporation and/or its affiliates. Other names may be trademarks of their respective owners.
This software and documentation may provide access to or information on content, products, and services from third parties. Oracle Corporation and its affiliates are not responsible for and expressly disclaim all warranties of any kind with respect to third-party content, products, and services. Oracle Corporation and its affiliates will not be responsible for any loss, costs, or damages incurred due to your access to or use of third-party content, products, or services.
iii
Contents
1 Cartridge Overview
Hardware and Software Requirements................................................................................................ 1-1NE Interface ........................................................................................................................................ 1-1ASAP Version ..................................................................................................................................... 1-1
Connecting to the NE............................................................................................................................... 1-2Services, Features, and Options............................................................................................................. 1-2Communication Parameters ................................................................................................................... 1-4
2 Atomic Service Description Layer (ASDL) Commands
ASDL Commands..................................................................................................................................... 2-2A_CSCO-BTS10200_4-4_ADD_AOR-TO-SUBSCRIBER .............................................................. 2-6
MML commands ......................................................................................................................... 2-7Output Parameters...................................................................................................................... 2-7
A_CSCO-BTS10200_4-4_ADD_AOR-TO-SUBSCRIBER-ROLLBACK....................................... 2-7MML commands ......................................................................................................................... 2-7Output Parameters...................................................................................................................... 2-7
A_CSCO-BTS10200_4-4_ADD_AUTHORIZATION-CODE........................................................ 2-7MML commands ......................................................................................................................... 2-8Output Parameters...................................................................................................................... 2-8
A_CSCO-BTS10200_4-4_ADD_AUTHORIZATION-CODE-GROUP........................................ 2-8MML commands ......................................................................................................................... 2-8Output Parameters...................................................................................................................... 2-9
A_CSCO-BTS10200_4-4_ADD_AUTHORIZATION-CODE-GROUP-ROLLBACK................. 2-9MML commands ......................................................................................................................... 2-9Output Parameters...................................................................................................................... 2-9
A_CSCO-BTS10200_4-4_ADD_AUTHORIZATION-CODE-ROLLBACK ................................ 2-9MML commands ...................................................................................................................... 2-10Output Parameters................................................................................................................... 2-10
A_CSCO-BTS10200_4-4_ADD_CASUAL-WB-LIST................................................................... 2-10MML commands ...................................................................................................................... 2-10Output Parameters................................................................................................................... 2-10
A_CSCO-BTS10200_4-4_ADD_CASUAL-WB-LIST-ROLLBACK ........................................... 2-11MML commands ...................................................................................................................... 2-11Output Parameters................................................................................................................... 2-11
A_CSCO-BTS10200_4-4_ADD_CHANGED-NUMBER ............................................................ 2-11
iv
MML commands ...................................................................................................................... 2-11Output Parameters................................................................................................................... 2-12
A_CSCO-BTS10200_4-4_ADD_CHANGED-NUMBER-ROLLBACK ..................................... 2-12MML commands ...................................................................................................................... 2-12Output Parameters................................................................................................................... 2-12
A_CSCO-BTS10200_4-4_ADD_DN-TO-SUBSCRIBER.............................................................. 2-12MML commands ...................................................................................................................... 2-13Output Parameters................................................................................................................... 2-13
A_CSCO-BTS10200_4-4_ADD_DN-TO-SUBSCRIBER-ROLLBACK....................................... 2-13MML commands ...................................................................................................................... 2-14Output Parameters................................................................................................................... 2-14
A_CSCO-BTS10200_4-4_ADD_INTERNATIONAL-WB-LIST................................................. 2-14MML commands ...................................................................................................................... 2-14Output Parameters................................................................................................................... 2-15
A_CSCO-BTS10200_4-4_ADD_INTERNATIONAL-WB-LIST-ROLLBACK ......................... 2-15MML commands ...................................................................................................................... 2-15Output Parameters................................................................................................................... 2-15
A_CSCO-BTS10200_4-4_ADD_MAC-TO-SUBSCRIBER........................................................... 2-15MML commands ...................................................................................................................... 2-16Output Parameters................................................................................................................... 2-16
A_CSCO-BTS10200_4-4_ADD_MAC-TO-SUBSCRIBER-ROLLBACK ................................... 2-16MML commands ...................................................................................................................... 2-16Output Parameters................................................................................................................... 2-16
A_CSCO-BTS10200_4-4_ADD_MGP ........................................................................................... 2-17MML commands ...................................................................................................................... 2-17Output Parameters................................................................................................................... 2-17
A_CSCO-BTS10200_4-4_ADD_MGP-ROLLBACK .................................................................... 2-17MML commands ...................................................................................................................... 2-18Output Parameters................................................................................................................... 2-18
A_CSCO-BTS10200_4-4_ADD_MGW.......................................................................................... 2-18MML commands ...................................................................................................................... 2-18Output Parameters................................................................................................................... 2-19
A_CSCO-BTS10200_4-4_ADD_MGW-ROLLBACK................................................................... 2-19MML commands ...................................................................................................................... 2-19Output Parameters................................................................................................................... 2-19
A_CSCO-BTS10200_4-4_ADD_NATIONAL-WB-LIST ............................................................. 2-20MML commands ...................................................................................................................... 2-20Output Parameters................................................................................................................... 2-20
A_CSCO-BTS10200_4-4_ADD_NATIONAL-WB-LIST-ROLLBACK...................................... 2-20MML commands ...................................................................................................................... 2-20Output Parameters................................................................................................................... 2-21
A_CSCO-BTS10200_4-4_ADD_NATURE-OF-DIAL-WB-LIST ................................................ 2-21MML commands ...................................................................................................................... 2-21Output Parameters................................................................................................................... 2-21
A_CSCO-BTS10200_4-4_ADD_NATURE-OF-DIAL-WB-LIST-ROLLBACK......................... 2-21MML commands ...................................................................................................................... 2-22Output Parameters................................................................................................................... 2-22
v
A_CSCO-BTS10200_4-4_ADD_ONE-DIGIT-SPEED-CALL ..................................................... 2-22MML commands ...................................................................................................................... 2-22Output Parameters................................................................................................................... 2-23
A_CSCO-BTS10200_4-4_ADD_ONE-DIGIT-SPEED-CALL-ROLLBACK.............................. 2-23MML commands ...................................................................................................................... 2-23Output Parameters................................................................................................................... 2-23
A_CSCO-BTS10200_4-4_ADD_RAW-COMMAND .................................................................. 2-24MML commands ...................................................................................................................... 2-24Output Parameters................................................................................................................... 2-24
A_CSCO-BTS10200_4-4_ADD_SCREEN-LIST ........................................................................... 2-24MML commands ...................................................................................................................... 2-24Output Parameters................................................................................................................... 2-25
A_CSCO-BTS10200_4-4_ADD_SCREEN-LIST-ROLLBACK.................................................... 2-25MML commands ...................................................................................................................... 2-25Output Parameters................................................................................................................... 2-25
A_CSCO-BTS10200_4-4_ADD_SUBSCRIBER............................................................................. 2-25MML commands ...................................................................................................................... 2-27Output Parameters................................................................................................................... 2-27
A_CSCO-BTS10200_4-4_ADD_SUBSCRIBER-FEATURES....................................................... 2-28MML commands ...................................................................................................................... 2-28Output Parameters................................................................................................................... 2-28
A_CSCO-BTS10200_4-4_ADD_SUBSCRIBER-FEATURES-ROLLBACK ............................... 2-29MML commands ...................................................................................................................... 2-29Output Parameters................................................................................................................... 2-29
A_CSCO-BTS10200_4-4_ADD_SUBSCRIBER-PROFILE .......................................................... 2-30MML commands ...................................................................................................................... 2-30Output Parameters................................................................................................................... 2-31
A_CSCO-BTS10200_4-4_ADD_SUBSCRIBER-PROFILE-ROLLBACK ................................... 2-31MML commands ...................................................................................................................... 2-32Output Parameters................................................................................................................... 2-32
A_CSCO-BTS10200_4-4_ADD_SUBSCRIBER-ROLLBACK ..................................................... 2-32MML commands ...................................................................................................................... 2-34Output Parameters................................................................................................................... 2-34
A_CSCO-BTS10200_4-4_ADD_SUBSCRIBER-SERVICE-PROFILE ........................................ 2-34MML commands ...................................................................................................................... 2-34Output Parameters................................................................................................................... 2-35
A_CSCO-BTS10200_4-4_ADD_SUBSCRIBER-SERVICE-PROFILE-ROLLBACK ................. 2-35MML commands ...................................................................................................................... 2-35Output Parameters................................................................................................................... 2-35
A_CSCO-BTS10200_4-4_ADD_SUBSCRIBER-TIME-OF-DAY ................................................ 2-35MML commands ...................................................................................................................... 2-37Output Parameters................................................................................................................... 2-37
A_CSCO-BTS10200_4-4_ADD_SUBSCRIBER-TIME-OF-DAY-ROLLBACK......................... 2-38MML commands ...................................................................................................................... 2-39Output Parameters................................................................................................................... 2-40
A_CSCO-BTS10200_4-4_ADD_TERMINATION ....................................................................... 2-40MML commands ...................................................................................................................... 2-40
vi
Output Parameters................................................................................................................... 2-41A_CSCO-BTS10200_4-4_ADD_TERMINATION-ROLLBACK................................................ 2-41
MML commands ...................................................................................................................... 2-41Output Parameters................................................................................................................... 2-41
A_CSCO-BTS10200_4-4_ADD_TWO-DIGIT-SPEED-CALL .................................................... 2-41MML commands ...................................................................................................................... 2-43Output Parameters................................................................................................................... 2-43
A_CSCO-BTS10200_4-4_ADD_TWO-DIGIT-SPEED-CALL-ROLLBACK ............................. 2-43MML commands ...................................................................................................................... 2-44Output Parameters................................................................................................................... 2-44
A_CSCO-BTS10200_4-4_ADD_USER-AUTHENTICATION ................................................... 2-44MML commands ...................................................................................................................... 2-45Output Parameters................................................................................................................... 2-45
A_CSCO-BTS10200_4-4_ADD_USER-AUTHENTICATION-ROLLBACK............................ 2-45MML commands ...................................................................................................................... 2-45Output Parameters................................................................................................................... 2-46
A_CSCO-BTS10200_4-4_CHANGE_AOR-TO-SUBSCRIBER................................................... 2-46MML commands ...................................................................................................................... 2-46Output Parameters................................................................................................................... 2-46
A_CSCO-BTS10200_4-4_CONTROL_MGW ............................................................................... 2-46MML commands ...................................................................................................................... 2-46Output Parameters................................................................................................................... 2-47
A_CSCO-BTS10200_4-4_CONTROL_MGW-ROLLBACK........................................................ 2-47MML commands ...................................................................................................................... 2-47Output Parameters................................................................................................................... 2-47
A_CSCO-BTS10200_4-4_CONTROL_SUBSCRIBER-TERMINATION ................................... 2-47MML commands ...................................................................................................................... 2-47Output Parameters................................................................................................................... 2-48
A_CSCO-BTS10200_4-4_CONTROL_SUBSCRIBER-TERMINATION-ROLLBACK............ 2-48MML commands ...................................................................................................................... 2-48Output Parameters................................................................................................................... 2-48
A_CSCO-BTS10200_4-4_DEL_AOR-TO-SUBSCRIBER............................................................. 2-48MML commands ...................................................................................................................... 2-49Output Parameters................................................................................................................... 2-49
A_CSCO-BTS10200_4-4_DEL_AUTHORIZATION-CODE...................................................... 2-49MML commands ...................................................................................................................... 2-49Output Parameters................................................................................................................... 2-49
A_CSCO-BTS10200_4-4_DEL_AUTHORIZATION-CODE-GROUP ...................................... 2-49MML commands ...................................................................................................................... 2-50Output Parameters................................................................................................................... 2-50
A_CSCO-BTS10200_4-4_DEL_CASUAL-WB-LIST.................................................................... 2-50MML commands ...................................................................................................................... 2-50Output Parameters................................................................................................................... 2-50
A_CSCO-BTS10200_4-4_DEL_CHANGED-NUMBER.............................................................. 2-51MML commands ...................................................................................................................... 2-51Output Parameters................................................................................................................... 2-51
A_CSCO-BTS10200_4-4_DEL_DN-TO-SUBSCRIBER ............................................................... 2-51
vii
MML commands ...................................................................................................................... 2-51Output Parameters................................................................................................................... 2-52
A_CSCO-BTS10200_4-4_DEL_INTERNATIONAL-WB-LIST .................................................. 2-52MML commands ...................................................................................................................... 2-52Output Parameters................................................................................................................... 2-52
A_CSCO-BTS10200_4-4_DEL_MAC-TO-SUBSCRIBER............................................................ 2-52MML commands ...................................................................................................................... 2-53Output Parameters................................................................................................................... 2-53
A_CSCO-BTS10200_4-4_DEL_MGP............................................................................................. 2-53MML commands ...................................................................................................................... 2-53Output Parameters................................................................................................................... 2-53
A_CSCO-BTS10200_4-4_DEL_MGW ........................................................................................... 2-53MML commands ...................................................................................................................... 2-54Output Parameters................................................................................................................... 2-54
A_CSCO-BTS10200_4-4_DEL_NATIONAL-WB-LIST .............................................................. 2-54MML commands ...................................................................................................................... 2-54Output Parameters................................................................................................................... 2-54
A_CSCO-BTS10200_4-4_DEL_NATURE-OF-DIAL-WB-LIST ................................................. 2-55MML commands ...................................................................................................................... 2-55Output Parameters................................................................................................................... 2-55
A_CSCO-BTS10200_4-4_DEL_ONE-DIGIT-SPEED-CALL ...................................................... 2-55MML commands ...................................................................................................................... 2-56Output Parameters................................................................................................................... 2-56
A_CSCO-BTS10200_4-4_DEL_SCREEN-LIST............................................................................. 2-56MML commands ...................................................................................................................... 2-56Output Parameters................................................................................................................... 2-57
A_CSCO-BTS10200_4-4_DEL_SUBSCRIBER.............................................................................. 2-57MML commands ...................................................................................................................... 2-57Output Parameters................................................................................................................... 2-57
A_CSCO-BTS10200_4-4_DEL_SUBSCRIBER-FEATURES........................................................ 2-57MML commands ...................................................................................................................... 2-57Output Parameters................................................................................................................... 2-58
A_CSCO-BTS10200_4-4_DEL_SUBSCRIBER-PROFILE............................................................ 2-58MML commands ...................................................................................................................... 2-58Output Parameters................................................................................................................... 2-58
A_CSCO-BTS10200_4-4_DEL_SUBSCRIBER-SERVICE-PROFILE.......................................... 2-58MML commands ...................................................................................................................... 2-59Output Parameters................................................................................................................... 2-59
A_CSCO-BTS10200_4-4_DEL_SUBSCRIBER-TIME-OF-DAY.................................................. 2-59MML commands ...................................................................................................................... 2-59Output Parameters................................................................................................................... 2-59
A_CSCO-BTS10200_4-4_DEL_TERMINATION......................................................................... 2-59MML commands ...................................................................................................................... 2-60Output Parameters................................................................................................................... 2-60
A_CSCO-BTS10200_4-4_DEL_TWO-DIGIT-SPEED-CALL...................................................... 2-60MML commands ...................................................................................................................... 2-61Output Parameters................................................................................................................... 2-61
viii
A_CSCO-BTS10200_4-4_DEL_USER-AUTHENTICATION..................................................... 2-62MML commands ...................................................................................................................... 2-62Output Parameters................................................................................................................... 2-62
A_CSCO-BTS10200_4-4_EQUIP_SUBSCRIBER-TERMINATION........................................... 2-62MML commands ...................................................................................................................... 2-62Output Parameters................................................................................................................... 2-62
A_CSCO-BTS10200_4-4_MOD_AOR-TO-SUBSCRIBER........................................................... 2-63MML commands ...................................................................................................................... 2-63Output Parameters................................................................................................................... 2-63
A_CSCO-BTS10200_4-4_MOD_AOR-TO-SUBSCRIBER-ROLLBACK ................................... 2-63MML commands ...................................................................................................................... 2-63Output Parameters................................................................................................................... 2-64
A_CSCO-BTS10200_4-4_MOD_AUTHORIZATION-CODE.................................................... 2-64MML commands ...................................................................................................................... 2-64Output Parameters................................................................................................................... 2-64
A_CSCO-BTS10200_4-4_MOD_AUTHORIZATION-CODE-GROUP .................................... 2-64MML commands ...................................................................................................................... 2-65Output Parameters................................................................................................................... 2-65
A_CSCO-BTS10200_4-4_MOD_AUTHORIZATION-CODE-GROUP-ROLLBACK............. 2-65MML commands ...................................................................................................................... 2-65Output Parameters................................................................................................................... 2-66
A_CSCO-BTS10200_4-4_MOD_AUTHORIZATION-CODE-ROLLBACK............................. 2-66MML commands ...................................................................................................................... 2-66Output Parameters................................................................................................................... 2-66
A_CSCO-BTS10200_4-4_MOD_CHANGED-NUMBER............................................................ 2-66MML commands ...................................................................................................................... 2-67Output Parameters................................................................................................................... 2-67
A_CSCO-BTS10200_4-4_MOD_CHANGED-NUMBER-ROLLBACK .................................... 2-67MML commands ...................................................................................................................... 2-67Output Parameters................................................................................................................... 2-67
A_CSCO-BTS10200_4-4_MOD_DN-TO-SUBSCRIBER ............................................................. 2-68MML commands ...................................................................................................................... 2-68Output Parameters................................................................................................................... 2-68
A_CSCO-BTS10200_4-4_MOD_DN-TO-SUBSCRIBER-ROLLBACK...................................... 2-68MML commands ...................................................................................................................... 2-69Output Parameters................................................................................................................... 2-69
A_CSCO-BTS10200_4-4_MOD_MAC-TO-SUBSCRIBER.......................................................... 2-69MML commands ...................................................................................................................... 2-70Output Parameters................................................................................................................... 2-70
A_CSCO-BTS10200_4-4_MOD_MAC-TO-SUBSCRIBER-ROLLBACK .................................. 2-70MML commands ...................................................................................................................... 2-70Output Parameters................................................................................................................... 2-70
A_CSCO-BTS10200_4-4_MOD_MGP........................................................................................... 2-71MML commands ...................................................................................................................... 2-71Output Parameters................................................................................................................... 2-71
A_CSCO-BTS10200_4-4_MOD_MGP-ROLLBACK ................................................................... 2-71MML commands ...................................................................................................................... 2-72
ix
Output Parameters................................................................................................................... 2-72A_CSCO-BTS10200_4-4_MOD_MGW ......................................................................................... 2-72
MML commands ...................................................................................................................... 2-72Output Parameters................................................................................................................... 2-73
A_CSCO-BTS10200_4-4_MOD_MGW-ROLLBACK.................................................................. 2-73MML commands ...................................................................................................................... 2-73Output Parameters................................................................................................................... 2-73
A_CSCO-BTS10200_4-4_MOD_ONE-DIGIT-SPEED-CALL .................................................... 2-74MML commands ...................................................................................................................... 2-74Output Parameters................................................................................................................... 2-74
A_CSCO-BTS10200_4-4_MOD_ONE-DIGIT-SPEED-CALL-ROLLBACK ............................. 2-74MML commands ...................................................................................................................... 2-75Output Parameters................................................................................................................... 2-75
A_CSCO-BTS10200_4-4_MOD_SCREEN-LIST .......................................................................... 2-75MML commands ...................................................................................................................... 2-76Output Parameters................................................................................................................... 2-76
A_CSCO-BTS10200_4-4_MOD_SCREEN-LIST-ROLLBACK ................................................... 2-76MML commands ...................................................................................................................... 2-76Output Parameters................................................................................................................... 2-76
A_CSCO-BTS10200_4-4_MOD_SUBSCRIBER............................................................................ 2-76MML commands ...................................................................................................................... 2-78Output Parameters................................................................................................................... 2-78
A_CSCO-BTS10200_4-4_MOD_SUBSCRIBER-FEATURES...................................................... 2-79MML commands ...................................................................................................................... 2-79Output Parameters................................................................................................................... 2-79
A_CSCO-BTS10200_4-4_MOD_SUBSCRIBER-FEATURES-ROLLBACK............................... 2-79MML commands ...................................................................................................................... 2-80Output Parameters................................................................................................................... 2-80
A_CSCO-BTS10200_4-4_MOD_SUBSCRIBER-PROFILE.......................................................... 2-80MML commands ...................................................................................................................... 2-81Output Parameters................................................................................................................... 2-81
A_CSCO-BTS10200_4-4_MOD_SUBSCRIBER-PROFILE-ROLLBACK .................................. 2-82MML commands ...................................................................................................................... 2-82Output Parameters................................................................................................................... 2-83
A_CSCO-BTS10200_4-4_MOD_SUBSCRIBER-ROLLBACK .................................................... 2-83MML commands ...................................................................................................................... 2-84Output Parameters................................................................................................................... 2-85
A_CSCO-BTS10200_4-4_MOD_SUBSCRIBER-SERVICE-PROFILE........................................ 2-85MML commands ...................................................................................................................... 2-85Output Parameters................................................................................................................... 2-85
A_CSCO-BTS10200_4-4_MOD_SUBSCRIBER-SERVICE-PROFILE-ROLLBACK ................ 2-86MML commands ...................................................................................................................... 2-86Output Parameters................................................................................................................... 2-86
A_CSCO-BTS10200_4-4_MOD_SUBSCRIBER-TIME-OF-DAY................................................ 2-86MML commands ...................................................................................................................... 2-88Output Parameters................................................................................................................... 2-88
A_CSCO-BTS10200_4-4_MOD_SUBSCRIBER-TIME-OF-DAY-ROLLBACK ........................ 2-89
x
MML commands ...................................................................................................................... 2-90Output Parameters................................................................................................................... 2-91
A_CSCO-BTS10200_4-4_MOD_TERMINATION....................................................................... 2-91MML commands ...................................................................................................................... 2-91Output Parameters................................................................................................................... 2-91
A_CSCO-BTS10200_4-4_MOD_TERMINATION-ROLLBACK ............................................... 2-92MML commands ...................................................................................................................... 2-92Output Parameters................................................................................................................... 2-92
A_CSCO-BTS10200_4-4_MOD_TWO-DIGIT-SPEED-CALL.................................................... 2-92MML commands ...................................................................................................................... 2-93Output Parameters................................................................................................................... 2-94
A_CSCO-BTS10200_4-4_MOD_TWO-DIGIT-SPEED-CALL-ROLLBACK ............................ 2-94MML commands ...................................................................................................................... 2-95Output Parameters................................................................................................................... 2-95
A_CSCO-BTS10200_4-4_MOD_USER-AUTHENTICATION................................................... 2-95MML commands ...................................................................................................................... 2-96Output Parameters................................................................................................................... 2-96
A_CSCO-BTS10200_4-4_MOD_USER-AUTHENTICATION-ROLLBACK ........................... 2-96MML commands ...................................................................................................................... 2-96Output Parameters................................................................................................................... 2-96
A_CSCO-BTS10200_4-4_QRY_AOR-TO-SUBSCRIBER ............................................................ 2-96MML commands ...................................................................................................................... 2-97Output Parameters................................................................................................................... 2-97
A_CSCO-BTS10200_4-4_QRY_AOR-TO-SUBSCRIBER-ROLLBACK..................................... 2-97MML commands ...................................................................................................................... 2-97Output Parameters................................................................................................................... 2-97
A_CSCO-BTS10200_4-4_QRY_AUTHORIZATION-CODE ..................................................... 2-98MML commands ...................................................................................................................... 2-98Output Parameters................................................................................................................... 2-98
A_CSCO-BTS10200_4-4_QRY_AUTHORIZATION-CODE-GROUP...................................... 2-99MML commands ...................................................................................................................... 2-99Output Parameters................................................................................................................... 2-99
A_CSCO-BTS10200_4-4_QRY_AUTHORIZATION-CODE-GROUP-ROLLBACK .............. 2-99MML commands .................................................................................................................... 2-100Output Parameters................................................................................................................. 2-100
A_CSCO-BTS10200_4-4_QRY_AUTHORIZATION-CODE-ROLLBACK ............................ 2-100MML commands .................................................................................................................... 2-100Output Parameters................................................................................................................. 2-100
A_CSCO-BTS10200_4-4_QRY_CASUAL-WB-LIST ................................................................. 2-101MML commands .................................................................................................................... 2-101Output Parameters................................................................................................................. 2-101
A_CSCO-BTS10200_4-4_QRY_CASUAL-WB-LIST-ROLLBACK .......................................... 2-101MML commands .................................................................................................................... 2-102Output Parameters................................................................................................................. 2-102
A_CSCO-BTS10200_4-4_QRY_CHANGED-NUMBER ........................................................... 2-102MML commands .................................................................................................................... 2-102Output Parameters................................................................................................................. 2-102
xi
A_CSCO-BTS10200_4-4_QRY_CHANGED-NUMBER-ROLLBACK.................................... 2-102MML commands .................................................................................................................... 2-102Output Parameters................................................................................................................. 2-103
A_CSCO-BTS10200_4-4_QRY_CONTROL-MGW-ROLLBACK............................................ 2-103MML commands .................................................................................................................... 2-103Output Parameters................................................................................................................. 2-103
A_CSCO-BTS10200_4-4_QRY_CONTROL-TERMINATION-ROLLBACK ......................... 2-103MML commands .................................................................................................................... 2-103Output Parameters................................................................................................................. 2-104
A_CSCO-BTS10200_4-4_QRY_DN-TO-SUBSCRIBER............................................................. 2-104MML commands .................................................................................................................... 2-104Output Parameters................................................................................................................. 2-104
A_CSCO-BTS10200_4-4_QRY_DN-TO-SUBSCRIBER-ROLLBACK ..................................... 2-104MML commands .................................................................................................................... 2-105Output Parameters................................................................................................................. 2-105
A_CSCO-BTS10200_4-4_QRY_INTERNATIONAL-WB-LIST................................................ 2-105MML commands .................................................................................................................... 2-106Output Parameters................................................................................................................. 2-106
A_CSCO-BTS10200_4-4_QRY_INTERNATIONAL-WB-LIST-ROLLBACK ........................ 2-106MML commands .................................................................................................................... 2-106Output Parameters................................................................................................................. 2-106
A_CSCO-BTS10200_4-4_QRY_MAC-TO-SUBSCRIBER ......................................................... 2-106MML commands .................................................................................................................... 2-107Output Parameters................................................................................................................. 2-107
A_CSCO-BTS10200_4-4_QRY_MAC-TO-SUBSCRIBER-ROLLBACK.................................. 2-107MML commands .................................................................................................................... 2-107Output Parameters................................................................................................................. 2-107
A_CSCO-BTS10200_4-4_QRY_MGP .......................................................................................... 2-108MML commands .................................................................................................................... 2-108Output Parameters................................................................................................................. 2-108
A_CSCO-BTS10200_4-4_QRY_MGP-ROLLBACK................................................................... 2-108MML commands .................................................................................................................... 2-108Output Parameters................................................................................................................. 2-108
A_CSCO-BTS10200_4-4_QRY_MGW......................................................................................... 2-109MML commands .................................................................................................................... 2-109Output Parameters................................................................................................................. 2-109
A_CSCO-BTS10200_4-4_QRY_MGW-ROLLBACK ................................................................. 2-109MML commands .................................................................................................................... 2-109Output Parameters................................................................................................................. 2-109
A_CSCO-BTS10200_4-4_QRY_NATIONAL-WB-LIST............................................................ 2-109MML commands .................................................................................................................... 2-110Output Parameters................................................................................................................. 2-110
A_CSCO-BTS10200_4-4_QRY_NATIONAL-WB-LIST-ROLLBACK .................................... 2-110MML commands .................................................................................................................... 2-110Output Parameters................................................................................................................. 2-110
A_CSCO-BTS10200_4-4_QRY_NATURE-OF-DIAL-WB-LIST............................................... 2-110MML commands .................................................................................................................... 2-111
xii
Output Parameters................................................................................................................. 2-111A_CSCO-BTS10200_4-4_QRY_NATURE-OF-DIAL-WB-LIST-ROLLBACK........................ 2-111
MML commands .................................................................................................................... 2-111Output Parameters................................................................................................................. 2-111
A_CSCO-BTS10200_4-4_QRY_ONE-DIGIT-SPEED-CALL.................................................... 2-112MML commands .................................................................................................................... 2-112Output Parameters................................................................................................................. 2-112
A_CSCO-BTS10200_4-4_QRY_ONE-DIGIT-SPEED-CALL-ROLLBACK............................. 2-112MML commands .................................................................................................................... 2-112Output Parameters................................................................................................................. 2-112
A_CSCO-BTS10200_4-4_QRY_SCREEN-LIST .......................................................................... 2-112MML commands .................................................................................................................... 2-113Output Parameters................................................................................................................. 2-113
A_CSCO-BTS10200_4-4_QRY_SCREEN-LIST-ROLLBACK................................................... 2-113MML commands .................................................................................................................... 2-113Output Parameters................................................................................................................. 2-113
A_CSCO-BTS10200_4-4_QRY_SUBSCRIBER ........................................................................... 2-114MML commands .................................................................................................................... 2-114Output Parameters................................................................................................................. 2-114
A_CSCO-BTS10200_4-4_QRY_SUBSCRIBER-FEATURES ..................................................... 2-115MML commands .................................................................................................................... 2-115Output Parameters................................................................................................................. 2-115
A_CSCO-BTS10200_4-4_QRY_SUBSCRIBER-FEATURES-ROLLBACK .............................. 2-116MML commands .................................................................................................................... 2-116Output Parameters................................................................................................................. 2-116
A_CSCO-BTS10200_4-4_QRY_SUBSCRIBER-PROFILE ......................................................... 2-116MML commands .................................................................................................................... 2-117Output Parameters................................................................................................................. 2-117
A_CSCO-BTS10200_4-4_QRY_SUBSCRIBER-PROFILE-ROLLBACK.................................. 2-117MML commands .................................................................................................................... 2-117Output Parameters................................................................................................................. 2-117
A_CSCO-BTS10200_4-4_QRY_SUBSCRIBER-ROLLBACK .................................................... 2-118MML commands .................................................................................................................... 2-118Output Parameters................................................................................................................. 2-118
A_CSCO-BTS10200_4-4_QRY_SUBSCRIBER-SERVICE-PROFILE ....................................... 2-119MML commands .................................................................................................................... 2-119Output Parameters................................................................................................................. 2-120
A_CSCO-BTS10200_4-4_QRY_SUBSCRIBER-SERVICE-PROFILE-ROLLBACK................ 2-120MML commands .................................................................................................................... 2-120Output Parameters................................................................................................................. 2-120
A_CSCO-BTS10200_4-4_QRY_SUBSCRIBER-TIME-OF-DAY ............................................... 2-120MML commands .................................................................................................................... 2-121Output Parameters................................................................................................................. 2-121
A_CSCO-BTS10200_4-4_QRY_SUBSCRIBER-TIME-OF-DAY-ROLLBACK........................ 2-121MML commands .................................................................................................................... 2-121Output Parameters................................................................................................................. 2-121
A_CSCO-BTS10200_4-4_QRY_TERMINATION ...................................................................... 2-121
xiii
MML commands .................................................................................................................... 2-122Output Parameters................................................................................................................. 2-122
A_CSCO-BTS10200_4-4_QRY_TERMINATION-ROLLBACK............................................... 2-122MML commands .................................................................................................................... 2-122Output Parameters................................................................................................................. 2-122
A_CSCO-BTS10200_4-4_QRY_TWO-DIGIT-SPEED-CALL ................................................... 2-122MML commands .................................................................................................................... 2-122Output Parameters................................................................................................................. 2-123
A_CSCO-BTS10200_4-4_QRY_TWO-DIGIT-SPEED-CALL-ROLLBACK............................ 2-123MML commands .................................................................................................................... 2-123Output Parameters................................................................................................................. 2-123
A_CSCO-BTS10200_4-4_QRY_USER-AUTHENTICATION .................................................. 2-123MML commands .................................................................................................................... 2-123Output Parameters................................................................................................................. 2-123
A_CSCO-BTS10200_4-4_QRY_USER-AUTHENTICATION-ROLLBACK........................... 2-124MML commands .................................................................................................................... 2-124Output Parameters................................................................................................................. 2-124
A_CSCO-BTS10200_4-4_SHOW_TRANSACTION-QUEUE.................................................. 2-124MML commands .................................................................................................................... 2-125Output Parameters................................................................................................................. 2-125
A_CSCO-BTS10200_4-4_UNEQUIP_SUBSCRIBER-TERMINATION .................................. 2-125MML commands .................................................................................................................... 2-125Output Parameters................................................................................................................. 2-125
User Exit Types..................................................................................................................................... 2-125Understanding User Exit Type XML Files ................................................................................ 2-126
User Defined ASDL Exit Types ........................................................................................................ 2-127UserExitType.xml ............................................................................................................................... 2-128
3 Service Definition
CSDL Commands ..................................................................................................................................... 3-2C_CSCO-BTS10200_4-4_ADD_AOR-TO-SUBSCRIBER............................................................... 3-4
Mapping to ASDLs ..................................................................................................................... 3-5C_CSCO-BTS10200_4-4_ADD_AUTHORIZATION-CODE........................................................ 3-5
Mapping to ASDLs ..................................................................................................................... 3-6C_CSCO-BTS10200_4-4_ADD_AUTHORIZATION-CODE-GROUP ........................................ 3-6
Mapping to ASDLs ..................................................................................................................... 3-7C_CSCO-BTS10200_4-4_ADD_CASUAL-WB-LIST...................................................................... 3-7
Mapping to ASDLs ..................................................................................................................... 3-7C_CSCO-BTS10200_4-4_ADD_CHANGED-NUMBER................................................................ 3-8
Mapping to ASDLs ..................................................................................................................... 3-8C_CSCO-BTS10200_4-4_ADD_DN-TO-SUBSCRIBER ................................................................. 3-8
Mapping to ASDLs ..................................................................................................................... 3-9C_CSCO-BTS10200_4-4_ADD_INTERNATIONAL-WB-LIST .................................................... 3-9
Mapping to ASDLs .................................................................................................................. 3-10C_CSCO-BTS10200_4-4_ADD_MAC-TO-SUBSCRIBER........................................................... 3-10
Mapping to ASDLs .................................................................................................................. 3-11C_CSCO-BTS10200_4-4_ADD_MGP............................................................................................ 3-11
xiv
Mapping to ASDLs .................................................................................................................. 3-12C_CSCO-BTS10200_4-4_ADD_MGW .......................................................................................... 3-12
Mapping to ASDLs .................................................................................................................. 3-13C_CSCO-BTS10200_4-4_ADD_NATIONAL-WB-LIST ............................................................. 3-13
Mapping to ASDLs .................................................................................................................. 3-13C_CSCO-BTS10200_4-4_ADD_NATURE-OF-DIAL-WB-LIST ................................................ 3-13
Mapping to ASDLs .................................................................................................................. 3-14C_CSCO-BTS10200_4-4_ADD_ONE-DIGIT-SPEED-CALL ..................................................... 3-14
Mapping to ASDLs .................................................................................................................. 3-15C_CSCO-BTS10200_4-4_ADD_RAW-COMMAND................................................................... 3-15
Mapping to ASDLs .................................................................................................................. 3-15C_CSCO-BTS10200_4-4_ADD_SCREEN-LIST ........................................................................... 3-16
Mapping to ASDLs .................................................................................................................. 3-16C_CSCO-BTS10200_4-4_ADD_SIP-SUBSCRIBER...................................................................... 3-16
Mapping to ASDLs .................................................................................................................. 3-18C_CSCO-BTS10200_4-4_ADD_SUBSCRIBER............................................................................. 3-19
Mapping to ASDLs .................................................................................................................. 3-20C_CSCO-BTS10200_4-4_ADD_SUBSCRIBER-FEATURES....................................................... 3-21
Mapping to ASDLs .................................................................................................................. 3-22C_CSCO-BTS10200_4-4_ADD_SUBSCRIBER-PROFILE........................................................... 3-22
Mapping to ASDLs .................................................................................................................. 3-23C_CSCO-BTS10200_4-4_ADD_SUBSCRIBER-SERVICE-PROFILE......................................... 3-23
Mapping to ASDLs .................................................................................................................. 3-23C_CSCO-BTS10200_4-4_ADD_SUBSCRIBER-TIME-OF-DAY................................................. 3-24
Mapping to ASDLs .................................................................................................................. 3-26C_CSCO-BTS10200_4-4_ADD_TERMINATION........................................................................ 3-26
Mapping to ASDLs .................................................................................................................. 3-27C_CSCO-BTS10200_4-4_ADD_TWO-DIGIT-SPEED-CALL..................................................... 3-27
Mapping to ASDLs .................................................................................................................. 3-28C_CSCO-BTS10200_4-4_ADD_USER-AUTHENTICATION.................................................... 3-28
Mapping to ASDLs .................................................................................................................. 3-29C_CSCO-BTS10200_4-4_CHANGE_AOR-TO-SUBSCRIBER................................................... 3-29
Mapping to ASDLs .................................................................................................................. 3-30C_CSCO-BTS10200_4-4_CONTROL_MGW ............................................................................... 3-30
Mapping to ASDLs .................................................................................................................. 3-30C_CSCO-BTS10200_4-4_CONTROL_SUBSCRIBER-TERMINATION ................................... 3-30
Mapping to ASDLs .................................................................................................................. 3-31C_CSCO-BTS10200_4-4_DEL_AOR-TO-SUBSCRIBER............................................................. 3-31
Mapping to ASDLs .................................................................................................................. 3-31C_CSCO-BTS10200_4-4_DEL_AUTHORIZATION-CODE ...................................................... 3-31
Mapping to ASDLs .................................................................................................................. 3-32C_CSCO-BTS10200_4-4_DEL_AUTHORIZATION-CODE-GROUP ...................................... 3-32
Mapping to ASDLs .................................................................................................................. 3-33C_CSCO-BTS10200_4-4_DEL_CASUAL-WB-LIST .................................................................... 3-33
Mapping to ASDLs .................................................................................................................. 3-34C_CSCO-BTS10200_4-4_DEL_CHANGED-NUMBER.............................................................. 3-34
Mapping to ASDLs .................................................................................................................. 3-34
xv
C_CSCO-BTS10200_4-4_DEL_DN-TO-SUBSCRIBER ............................................................... 3-35Mapping to ASDLs .................................................................................................................. 3-35
C_CSCO-BTS10200_4-4_DEL_INTERNATIONAL-WB-LIST .................................................. 3-36Mapping to ASDLs .................................................................................................................. 3-36
C_CSCO-BTS10200_4-4_DEL_MAC-TO-SUBSCRIBER ............................................................ 3-36Mapping to ASDLs .................................................................................................................. 3-37
C_CSCO-BTS10200_4-4_DEL_MGP ............................................................................................. 3-37Mapping to ASDLs .................................................................................................................. 3-38
C_CSCO-BTS10200_4-4_DEL_MGW ........................................................................................... 3-38Mapping to ASDLs .................................................................................................................. 3-38
C_CSCO-BTS10200_4-4_DEL_NATIONAL-WB-LIST............................................................... 3-39Mapping to ASDLs .................................................................................................................. 3-39
C_CSCO-BTS10200_4-4_DEL_NATURE-OF-DIAL-WB-LIST.................................................. 3-39Mapping to ASDLs .................................................................................................................. 3-40
C_CSCO-BTS10200_4-4_DEL_ONE-DIGIT-SPEED-CALL....................................................... 3-40Mapping to ASDLs .................................................................................................................. 3-41
C_CSCO-BTS10200_4-4_DEL_SCREEN-LIST............................................................................. 3-41Mapping to ASDLs .................................................................................................................. 3-42
C_CSCO-BTS10200_4-4_DEL_SUBSCRIBER .............................................................................. 3-42Mapping to ASDLs .................................................................................................................. 3-43
C_CSCO-BTS10200_4-4_DEL_SUBSCRIBER-FEATURES ........................................................ 3-43Mapping to ASDLs .................................................................................................................. 3-43
C_CSCO-BTS10200_4-4_DEL_SUBSCRIBER-PROFILE ............................................................ 3-44Mapping to ASDLs .................................................................................................................. 3-44
C_CSCO-BTS10200_4-4_DEL_SUBSCRIBER-SERVICE-PROFILE .......................................... 3-44Mapping to ASDLs .................................................................................................................. 3-45
C_CSCO-BTS10200_4-4_DEL_SUBSCRIBER-TIME-OF-DAY.................................................. 3-45Mapping to ASDLs .................................................................................................................. 3-46
C_CSCO-BTS10200_4-4_DEL_TERMINATION......................................................................... 3-46Mapping to ASDLs .................................................................................................................. 3-47
C_CSCO-BTS10200_4-4_DEL_TWO-DIGIT-SPEED-CALL ...................................................... 3-47Mapping to ASDLs .................................................................................................................. 3-48
C_CSCO-BTS10200_4-4_DEL_USER-AUTHENTICATION..................................................... 3-49Mapping to ASDLs .................................................................................................................. 3-49
C_CSCO-BTS10200_4-4_EQUIP_SUBSCRIBER-TERMINATION........................................... 3-49Mapping to ASDLs .................................................................................................................. 3-50
C_CSCO-BTS10200_4-4_MOD_AOR-TO-SUBSCRIBER........................................................... 3-50Mapping to ASDLs .................................................................................................................. 3-50
C_CSCO-BTS10200_4-4_MOD_AUTHORIZATION-CODE .................................................... 3-50Mapping to ASDLs .................................................................................................................. 3-51
C_CSCO-BTS10200_4-4_MOD_AUTHORIZATION-CODE-GROUP .................................... 3-51Mapping to ASDLs .................................................................................................................. 3-52
C_CSCO-BTS10200_4-4_MOD_CHANGED-NUMBER............................................................ 3-52Mapping to ASDLs .................................................................................................................. 3-53
C_CSCO-BTS10200_4-4_MOD_DN-TO-SUBSCRIBER ............................................................. 3-53Mapping to ASDLs .................................................................................................................. 3-54
C_CSCO-BTS10200_4-4_MOD_MAC-TO-SUBSCRIBER .......................................................... 3-54
xvi
Mapping to ASDLs .................................................................................................................. 3-55C_CSCO-BTS10200_4-4_MOD_MGP........................................................................................... 3-55
Mapping to ASDLs .................................................................................................................. 3-56C_CSCO-BTS10200_4-4_MOD_MGW ......................................................................................... 3-56
Mapping to ASDLs .................................................................................................................. 3-57C_CSCO-BTS10200_4-4_MOD_ONE-DIGIT-SPEED-CALL..................................................... 3-57
Mapping to ASDLs .................................................................................................................. 3-58C_CSCO-BTS10200_4-4_MOD_SCREEN-LIST........................................................................... 3-58
Mapping to ASDLs .................................................................................................................. 3-59C_CSCO-BTS10200_4-4_MOD_SUBSCRIBER ............................................................................ 3-59
Mapping to ASDLs .................................................................................................................. 3-61C_CSCO-BTS10200_4-4_MOD_SUBSCRIBER-FEATURES ...................................................... 3-61
Mapping to ASDLs .................................................................................................................. 3-62C_CSCO-BTS10200_4-4_MOD_SUBSCRIBER-PROFILE .......................................................... 3-62
Mapping to ASDLs .................................................................................................................. 3-63C_CSCO-BTS10200_4-4_MOD_SUBSCRIBER-SERVICE-PROFILE........................................ 3-63
Mapping to ASDLs .................................................................................................................. 3-64C_CSCO-BTS10200_4-4_MOD_SUBSCRIBER-TIME-OF-DAY................................................ 3-64
Mapping to ASDLs .................................................................................................................. 3-66C_CSCO-BTS10200_4-4_MOD_TERMINATION....................................................................... 3-66
Mapping to ASDLs .................................................................................................................. 3-67C_CSCO-BTS10200_4-4_MOD_TWO-DIGIT-SPEED-CALL .................................................... 3-67
Mapping to ASDLs .................................................................................................................. 3-69C_CSCO-BTS10200_4-4_MOD_USER-AUTHENTICATION................................................... 3-69
Mapping to ASDLs .................................................................................................................. 3-70C_CSCO-BTS10200_4-4_QRY_AOR-TO-SUBSCRIBER ............................................................ 3-70
Mapping to ASDLs .................................................................................................................. 3-70C_CSCO-BTS10200_4-4_QRY_AUTHORIZATION-CODE...................................................... 3-70
Mapping to ASDLs .................................................................................................................. 3-71C_CSCO-BTS10200_4-4_QRY_AUTHORIZATION-CODE-GROUP...................................... 3-71
Mapping to ASDLs .................................................................................................................. 3-71C_CSCO-BTS10200_4-4_QRY_CASUAL-WB-LIST.................................................................... 3-71
Mapping to ASDLs .................................................................................................................. 3-72C_CSCO-BTS10200_4-4_QRY_CHANGED-NUMBER ............................................................. 3-72
Mapping to ASDLs .................................................................................................................. 3-72C_CSCO-BTS10200_4-4_QRY_DN-TO-SUBSCRIBER............................................................... 3-72
Mapping to ASDLs .................................................................................................................. 3-72C_CSCO-BTS10200_4-4_QRY_INTERNATIONAL-WB-LIST.................................................. 3-73
Mapping to ASDLs .................................................................................................................. 3-73C_CSCO-BTS10200_4-4_QRY_MAC-TO-SUBSCRIBER............................................................ 3-73
Mapping to ASDLs .................................................................................................................. 3-73C_CSCO-BTS10200_4-4_QRY_MGP............................................................................................. 3-73
Mapping to ASDLs .................................................................................................................. 3-74C_CSCO-BTS10200_4-4_QRY_MGW........................................................................................... 3-74
Mapping to ASDLs .................................................................................................................. 3-74C_CSCO-BTS10200_4-4_QRY_NATIONAL-WB-LIST .............................................................. 3-74
Mapping to ASDLs .................................................................................................................. 3-74
xvii
C_CSCO-BTS10200_4-4_QRY_NATURE-OF-DIAL-WB-LIST ................................................. 3-74Mapping to ASDLs .................................................................................................................. 3-75
C_CSCO-BTS10200_4-4_QRY_ONE-DIGIT-SPEED-CALL ...................................................... 3-75Mapping to ASDLs .................................................................................................................. 3-75
C_CSCO-BTS10200_4-4_QRY_SCREEN-LIST ............................................................................ 3-75Mapping to ASDLs .................................................................................................................. 3-76
C_CSCO-BTS10200_4-4_QRY_SUBSCRIBER.............................................................................. 3-76Mapping to ASDLs .................................................................................................................. 3-76
C_CSCO-BTS10200_4-4_QRY_SUBSCRIBER-FEATURES........................................................ 3-76Mapping to ASDLs .................................................................................................................. 3-76
C_CSCO-BTS10200_4-4_QRY_SUBSCRIBER-PROFILE............................................................ 3-77Mapping to ASDLs .................................................................................................................. 3-77
C_CSCO-BTS10200_4-4_QRY_SUBSCRIBER-SERVICE-PROFILE.......................................... 3-77Mapping to ASDLs .................................................................................................................. 3-77
C_CSCO-BTS10200_4-4_QRY_SUBSCRIBER-TIME-OF-DAY ................................................. 3-77Mapping to ASDLs .................................................................................................................. 3-78
C_CSCO-BTS10200_4-4_QRY_TERMINATION ........................................................................ 3-78Mapping to ASDLs .................................................................................................................. 3-78
C_CSCO-BTS10200_4-4_QRY_TWO-DIGIT-SPEED-CALL...................................................... 3-78Mapping to ASDLs .................................................................................................................. 3-78
C_CSCO-BTS10200_4-4_QRY_USER-AUTHENTICATION .................................................... 3-79Mapping to ASDLs .................................................................................................................. 3-79
C_CSCO-BTS10200_4-4_SHOW_TRANSACTION-QUEUE .................................................... 3-79Mapping to ASDLs .................................................................................................................. 3-79
C_CSCO-BTS10200_4-4_UNEQUIP_SUBSCRIBER-TERMINATION .................................... 3-80Mapping to ASDLs .................................................................................................................. 3-80
4 Configuring ASAP to Support Additional NE Instances
Extracting Source Files ............................................................................................................................ 4-1Loading a New XML File .................................................................................................................. 4-1
Configuration XML File .......................................................................................................................... 4-1
xviii
1
Cartridge Overview 1-1
1Cartridge Overview
This guide provides a detailed description of the CISCO_BTS_10200_4_4_EMS_1_0 cartridge. It contains overview and technical information to assist with extending and integrating the cartridge into a customer environment.
The scope of this guide includes Oracle Communications ASAP (ASAP) as it pertains to the use of this cartridge. It is not intended to be a complete ASAP reference guide. For additional information when using this cartridge, refer to the ASAP documentation.
The CISCO_BTS_10200_4_4_EMS_1_0 cartridge provides the ASAP service configuration and network element (NE) interface to activate subscriber services on CSCO-BTS10200_4-4_HOST NEs.
Hardware and Software RequirementsThe following sections contain the high-level software and hardware environment requirements for provisioning subscriber services on authentication center:
■ NE Interface
■ ASAP Version
NE InterfaceThe following database tables in Service Activation Request Manager (SARM) are configured to support the NE configuration:
■ tbl_host_clli
■ tbl_clli_route
■ tbl_comm_param
■ tbl_resource_pool
■ tbl_ne_config
ASAP VersionThis cartridge was developed and tested using ASAP version 7.0.2.
For more information on the operating environment of this ASAP version, refer to the ASAP version 7.0.2 Release Notes.
Connecting to the NE
1-2 Product Title/BookTitle as a Variable
Connecting to the NEThe cartridge uses Telnet/SSH protocol.
Services, Features, and OptionsThis cartridge supports the following services:
Table 1–1 Supported Services
Service Description
C_CSCO-BTS10200_4-4_ADD_AOR-TO-SUBSCRIBER Add a address of record to subscriber.
C_CSCO-BTS10200_4-4_CHANGE_AOR-TO-SUBSCRIBER Change address of record to subscriber.
C_CSCO-BTS10200_4-4_DEL_AOR-TO-SUBSCRIBER Delete a address of record to subscriber.
C_CSCO-BTS10200_4-4_MOD_AOR-TO-SUBSCRIBER Modify a address of record to subscriber.
C_CSCO-BTS10200_4-4_QRY_AOR-TO-SUBSCRIBER Query a address of record to subscriber.
C_CSCO-BTS10200_4-4_ADD_AUTHORIZATION-CODE Add an authorization code.
C_CSCO-BTS10200_4-4_DEL_AUTHORIZATION-CODE Delete an authorization code.
C_CSCO-BTS10200_4-4_MOD_AUTHORIZATION-CODE Modify an authorization code.
C_CSCO-BTS10200_4-4_QRY_AUTHORIZATION-CODE Query an authorization code.
C_CSCO-BTS10200_4-4_ADD_AUTHORIZATION-CODE-GROUP
Add an authorization code group.
C_CSCO-BTS10200_4-4_DEL_AUTHORIZATION-CODE-GROUP
Delete an authorization code group.
C_CSCO-BTS10200_4-4_MOD_AUTHORIZATION-CODE-GROUP
Modify an authorization code group.
C_CSCO-BTS10200_4-4_QRY_AUTHORIZATION-CODE-GROUP
Query a authorization code group.
C_CSCO-BTS10200_4-4_ADD_CASUAL-WB-LIST Add a casual white black list.
C_CSCO-BTS10200_4-4_DEL_CASUAL-WB-LIST Delete a casual white black list.
C_CSCO-BTS10200_4-4_QRY_CASUAL-WB-LIST Query a casual white black list.
C_CSCO-BTS10200_4-4_ADD_CHANGED-NUMBER Add a changed number.
C_CSCO-BTS10200_4-4_DEL_CHANGED-NUMBER Delete a changed number.
C_CSCO-BTS10200_4-4_MOD_CHANGED-NUMBER Modify a changed number.
C_CSCO-BTS10200_4-4_QRY_CHANGED-NUMBER Query a changed number.
C_CSCO-BTS10200_4-4_ADD_DN-TO-SUBSCRIBER Add a DN2Subscriber.
C_CSCO-BTS10200_4-4_DEL_DN-TO-SUBSCRIBER Delete a DN2Subscriber.
C_CSCO-BTS10200_4-4_MOD_DN-TO-SUBSCRIBER Modify a DN2Subscriber.
C_CSCO-BTS10200_4-4_QRY_DN-TO-SUBSCRIBER Query a DN2Subscriber.
C_CSCO-BTS10200_4-4_ADD_INTERNATIONAL-WB-LIST Add an international white black list.
C_CSCO-BTS10200_4-4_DEL_INTERNATIONAL-WB-LIST Delete an international white black list.
C_CSCO-BTS10200_4-4_QRY_INTERNATIONAL-WB-LIST Query an international white black list.
C_CSCO-BTS10200_4-4_ADD_MAC-TO-SUBSCRIBER Add a MAC address to subscriber.
C_CSCO-BTS10200_4-4_DEL_MAC-TO-SUBSCRIBER Delete a MAC address to subscriber.
Services, Features, and Options
Cartridge Overview 1-3
C_CSCO-BTS10200_4-4_MOD_MAC-TO-SUBSCRIBER Modify a MAC address to subscriber.
C_CSCO-BTS10200_4-4_QRY_MAC-TO-SUBSCRIBER Query a MAC address to subscriber.
C_CSCO-BTS10200_4-4_ADD_MGP Add a media gateway provisioning.
C_CSCO-BTS10200_4-4_DEL_MGP Delete a media gateway provisioning.
C_CSCO-BTS10200_4-4_MOD_MGP Modify a media gateway provisioning.
C_CSCO-BTS10200_4-4_QRY_MGP Query a media gateway provisioning.
C_CSCO-BTS10200_4-4_ADD_MGW Add a media gateway.
C_CSCO-BTS10200_4-4_CONTROL_MGW Control MGW.
C_CSCO-BTS10200_4-4_DEL_MGW Delete a media gateway.
C_CSCO-BTS10200_4-4_MOD_MGW Modify a media gateway.
C_CSCO-BTS10200_4-4_QRY_MGW Query a media gateway.
C_CSCO-BTS10200_4-4_ADD_NATIONAL-WB-LIST Add a national white black list.
C_CSCO-BTS10200_4-4_DEL_NATIONAL-WB-LIST Delete a national white black list.
C_CSCO-BTS10200_4-4_QRY_NATIONAL-WB-LIST Query a national white black list.
C_CSCO-BTS10200_4-4_ADD_NATURE-OF-DIAL-WB-LIST Add a nature of dial white black list.
C_CSCO-BTS10200_4-4_DEL_NATURE-OF-DIAL-WB-LIST Delete a nature of dial white black list.
C_CSCO-BTS10200_4-4_QRY_NATURE-OF-DIAL-WB-LIST Query a nature of dial white black list.
C_CSCO-BTS10200_4-4_ADD_ONE-DIGIT-SPEED-CALL Add a speed call one digit.
C_CSCO-BTS10200_4-4_DEL_ONE-DIGIT-SPEED-CALL Delete a speed call one digit.
C_CSCO-BTS10200_4-4_MOD_ONE-DIGIT-SPEED-CALL Modify a speed call one digit.
C_CSCO-BTS10200_4-4_QRY_ONE-DIGIT-SPEED-CALL Query a speed call one digit.
C_CSCO-BTS10200_4-4_ADD_RAW-COMMAND Send a raw command to the remote NE.
C_CSCO-BTS10200_4-4_ADD_SCREEN-LIST Add a screening list editing.
C_CSCO-BTS10200_4-4_DEL_SCREEN-LIST Delete a screening list editing.
C_CSCO-BTS10200_4-4_MOD_SCREEN-LIST Modify a screening list editing.
C_CSCO-BTS10200_4-4_QRY_SCREEN-LIST Query a screening list editing.
C_CSCO-BTS10200_4-4_ADD_SIP-SUBSCRIBER Add and activate a SIP subscriber.
C_CSCO-BTS10200_4-4_ADD_SUBSCRIBER Add a subscriber.
C_CSCO-BTS10200_4-4_DEL_SUBSCRIBER Delete a subscriber.
C_CSCO-BTS10200_4-4_MOD_SUBSCRIBER Modify a subscriber.
C_CSCO-BTS10200_4-4_QRY_SUBSCRIBER Query a subscriber.
C_CSCO-BTS10200_4-4_ADD_SUBSCRIBER-FEATURES Add subscriber features.
C_CSCO-BTS10200_4-4_DEL_SUBSCRIBER-FEATURES Delete subscriber features.
C_CSCO-BTS10200_4-4_MOD_SUBSCRIBER-FEATURES Modify subscriber features.
C_CSCO-BTS10200_4-4_QRY_SUBSCRIBER-FEATURES Query subscriber features.
C_CSCO-BTS10200_4-4_ADD_SUBSCRIBER-PROFILE Add a subscriber profile.
C_CSCO-BTS10200_4-4_DEL_SUBSCRIBER-PROFILE Delete a subscriber profile.
Table 1–1 (Cont.) Supported Services
Service Description
Communication Parameters
1-4 Product Title/BookTitle as a Variable
Communication ParametersThe following is the list of parameters for the sample NE configuration XML used by Service Activation Configuration Tool (SACT).
C_CSCO-BTS10200_4-4_MOD_SUBSCRIBER-PROFILE Modify a subscriber profile.
C_CSCO-BTS10200_4-4_QRY_SUBSCRIBER-PROFILE Query a subscriber profile.
C_CSCO-BTS10200_4-4_ADD_SUBSCRIBER-SERVICE-PROFILE Add a subscriber service profile.
C_CSCO-BTS10200_4-4_DEL_SUBSCRIBER-SERVICE-PROFILE Delete a subscriber service profile.
C_CSCO-BTS10200_4-4_MOD_SUBSCRIBER-SERVICE-PROFILE Modify a subscriber service profile.
C_CSCO-BTS10200_4-4_QRY_SUBSCRIBER-SERVICE-PROFILE Query a subscriber servie profile.
C_CSCO-BTS10200_4-4_CONTROL_SUBSCRIBER-TERMINATION
Control a subscriber-termination.
C_CSCO-BTS10200_4-4_EQUIP_SUBSCRIBER-TERMINATION Equip a subscriber-termination.
C_CSCO-BTS10200_4-4_UNEQUIP_SUBSCRIBER-TERMINATION
Unequip a subscriber-termination.
C_CSCO-BTS10200_4-4_ADD_SUBSCRIBER-TIME-OF-DAY Add a subscriber time of day.
C_CSCO-BTS10200_4-4_DEL_SUBSCRIBER-TIME-OF-DAY Delete a subscriber time of day.
C_CSCO-BTS10200_4-4_MOD_SUBSCRIBER-TIME-OF-DAY Modify a subscriber time of day.
C_CSCO-BTS10200_4-4_QRY_SUBSCRIBER-TIME-OF-DAY Query a subscriber time of day.
C_CSCO-BTS10200_4-4_ADD_TERMINATION Add a termination.
C_CSCO-BTS10200_4-4_DEL_TERMINATION Delete a termination.
C_CSCO-BTS10200_4-4_MOD_TERMINATION Modify a termination.
C_CSCO-BTS10200_4-4_QRY_TERMINATION Query a termination.
C_CSCO-BTS10200_4-4_SHOW_TRANSACTION-QUEUE View all events in the transaction queue.
C_CSCO-BTS10200_4-4_ADD_TWO-DIGIT-SPEED-CALL Add a speed call two digit.
C_CSCO-BTS10200_4-4_DEL_TWO-DIGIT-SPEED-CALL Delete a speed call two digit.
C_CSCO-BTS10200_4-4_MOD_TWO-DIGIT-SPEED-CALL Modify a speed call two digit.
C_CSCO-BTS10200_4-4_QRY_TWO-DIGIT-SPEED-CALL Query a speed call two digit.
C_CSCO-BTS10200_4-4_ADD_USER-AUTHENTICATION Add a user authentication .
C_CSCO-BTS10200_4-4_DEL_USER-AUTHENTICATION Delete a user authentication .
C_CSCO-BTS10200_4-4_MOD_USER-AUTHENTICATION Modify a user authentication .
C_CSCO-BTS10200_4-4_QRY_USER-AUTHENTICATION Query a user authentication .
Table 1–2 Communication Parameters
Parameter Label Parameter Value Description
HOST_IPADDR localhost The host name or IP Address of theremote NE.
PORT 23 Port number to connect on remote NE host.
OPEN_TIMEOUT 20 Connection timeout in seconds.
READ_TIMEOUT 30 Read timeout in seconds.
Table 1–1 (Cont.) Supported Services
Service Description
Communication Parameters
Cartridge Overview 1-5
HOST_USERID optiuser Login User Name.
HOST_PASSWORD optiuser Password for the User.
PROMPT CLI> Provisioning prompt.
LOGIN_PROMPT login: Login prompt from the NE.
PASSWORD_PROMPT Password: Password prompt from the NE.
RESPONSELOG TRUE Flag to turn off or on Response log.
SSH_SUPPORT YES SSH Flag to indicate if the SSH is supported or not. Value YES or NO
SSH_PORT 3333 The SSH port number. Default is 22.
SSH_VERSION SSH2 The SSH version, SSH1 or SSH2. Default is SSH2.
SSH_AUTH_METHOD PASSWORD The SSH authentication method PASSWORD or PUBLIC_KEY.Default is PASSWORD.
SSH_PREF_PUBLIC_KEY PUBLIC_KEY_SSHRSA The SSH preferred public key, PUBLIC_KEY_SSHDSS orPUBLIC_KEY_SSHRSA. Default is PUBLIC_KEY_SSHRSA
SSH_PREF_CIPHER_CS CIPHER_BLOWFISH_CBC
The SSH preferred CS cipher.
SSH_PREF_CIPHER_SC CIPHER_BLOWFISH_CBC
The SSH preferred SC cipher.
SSH_PREF_MAC_CS HMAC_MD5 The SSH preferred CS message authentication.
SSH_PREF_MAC_SC HMAC_MD5 The SSH preferred SC message authentication.
SSH_PREF_COMP_CS COMPRESSION_NONE
The SSH preferred CS compression.
SSH_PREF_COMP_SC COMPRESSION_NONE
The SSH preferred SC compression.
Table 1–2 (Cont.) Communication Parameters
Parameter Label Parameter Value Description
Communication Parameters
1-6 Product Title/BookTitle as a Variable
2
Atomic Service Description Layer (ASDL) Commands 2-1
2Atomic Service Description Layer (ASDL)Commands
ASDL commands represent a set of atomic actions that ASAP can perform on a network element (NE). ASAP can combine ASDLs to create meaningful services (CSDLs) within a cartridge.
This chapter presents detailed information on the ASDL parameters that we provide with this cartridge. The following table lists and describes the type of parameter information that is included.
Table 2–1 ASDL Parameter Information
Item Description
Parameter Name Identifies the parameter that is configured for the stated service.
Description Describes the parameter.
Range Describes or lists the range of values that can be used to satisfy this parameter.
Default Value Configures a default value for the parameter so that it is not mandatory for the upstream system to provide a value.
Type Indicates one of the following parameter types:
■ S - Scalar, specifies the parameter label transmitted on the ASDL command. Scalar parameters are conventional name-value pair parameters.
■ C - Compound, specifies the base name of the compound parameter transmitted on the ASDL command. A compound parameter contains structures or arrays of information that are represented by a particular structure name or compound parameter name. Each compound parameter can contain a large number of elements. If you use compound parameters, you only require a single entry in the ASAP translation tables to call the compound parameter and all its associated parameter elements.
■ I - Indexed, identifies a parameter that contains a sequential numerical index value to tell the SARM that it should execute the same operation (for example, an ASDL command) for all occurrences of that index. Consequently, if there are several options on a particular CSDL command (OPT1, OPT2, OPT3, etc.), you can specify the OPT parameter as an indexed parameter. When you specify the OPT parameter as an indexed parameter, the SARM generates several occurrences of that same ASDL command and each command has a different value for the option being transmitted to the NEP.
For more information on parameter types, refer to the ASAP Developer’s Guide.
ASDL Commands
2-2 Product Title/BookTitle as a Variable
For a detailed description of the Required and Optional parameter classifications, refer to the ASAP System Administrator’s Guide.
ASDL CommandsThis cartridge provides the following ASDL commands:
■ A_CSCO-BTS10200_4-4_ADD_AOR-TO-SUBSCRIBER
■ A_CSCO-BTS10200_4-4_ADD_AOR-TO-SUBSCRIBER-ROLLBACK
■ A_CSCO-BTS10200_4-4_ADD_AUTHORIZATION-CODE
■ A_CSCO-BTS10200_4-4_ADD_AUTHORIZATION-CODE-GROUP
■ A_CSCO-BTS10200_4-4_ADD_AUTHORIZATION-CODE-GROUP-ROLLBACK
■ A_CSCO-BTS10200_4-4_ADD_AUTHORIZATION-CODE-ROLLBACK
■ A_CSCO-BTS10200_4-4_ADD_CASUAL-WB-LIST
■ A_CSCO-BTS10200_4-4_ADD_CASUAL-WB-LIST-ROLLBACK
■ A_CSCO-BTS10200_4-4_ADD_CHANGED-NUMBER
■ A_CSCO-BTS10200_4-4_ADD_CHANGED-NUMBER-ROLLBACK
■ A_CSCO-BTS10200_4-4_ADD_DN-TO-SUBSCRIBER
■ A_CSCO-BTS10200_4-4_ADD_DN-TO-SUBSCRIBER-ROLLBACK
■ A_CSCO-BTS10200_4-4_ADD_INTERNATIONAL-WB-LIST
■ A_CSCO-BTS10200_4-4_ADD_INTERNATIONAL-WB-LIST-ROLLBACK
■ A_CSCO-BTS10200_4-4_ADD_MAC-TO-SUBSCRIBER
■ A_CSCO-BTS10200_4-4_ADD_MAC-TO-SUBSCRIBER-ROLLBACK
■ A_CSCO-BTS10200_4-4_ADD_MGP
■ A_CSCO-BTS10200_4-4_ADD_MGP-ROLLBACK
■ A_CSCO-BTS10200_4-4_ADD_MGW
■ A_CSCO-BTS10200_4-4_ADD_MGW-ROLLBACK
■ A_CSCO-BTS10200_4-4_ADD_NATIONAL-WB-LIST
■ A_CSCO-BTS10200_4-4_ADD_NATIONAL-WB-LIST-ROLLBACK
■ A_CSCO-BTS10200_4-4_ADD_NATURE-OF-DIAL-WB-LIST
Class Indicates one of the following parameter classifications:
■ R - Required scalar parameter
■ O - Optional scalar parameter
■ C - Required compound parameter
■ N - Optional compound parameter
■ M - Mandatory indexed parameter
■ I - Optional indexed parameter
■ S - Parameter count
Table 2–1 (Cont.) ASDL Parameter Information
Item Description
ASDL Commands
Atomic Service Description Layer (ASDL) Commands 2-3
■ A_CSCO-BTS10200_4-4_ADD_NATURE-OF-DIAL-WB-LIST-ROLLBACK
■ A_CSCO-BTS10200_4-4_ADD_ONE-DIGIT-SPEED-CALL
■ A_CSCO-BTS10200_4-4_ADD_ONE-DIGIT-SPEED-CALL-ROLLBACK
■ A_CSCO-BTS10200_4-4_ADD_RAW-COMMAND
■ A_CSCO-BTS10200_4-4_ADD_SCREEN-LIST
■ A_CSCO-BTS10200_4-4_ADD_SCREEN-LIST-ROLLBACK
■ A_CSCO-BTS10200_4-4_ADD_SUBSCRIBER
■ A_CSCO-BTS10200_4-4_ADD_SUBSCRIBER-FEATURES
■ A_CSCO-BTS10200_4-4_ADD_SUBSCRIBER-FEATURES-ROLLBACK
■ A_CSCO-BTS10200_4-4_ADD_SUBSCRIBER-PROFILE
■ A_CSCO-BTS10200_4-4_ADD_SUBSCRIBER-PROFILE-ROLLBACK
■ A_CSCO-BTS10200_4-4_ADD_SUBSCRIBER-ROLLBACK
■ A_CSCO-BTS10200_4-4_ADD_SUBSCRIBER-SERVICE-PROFILE
■ A_CSCO-BTS10200_4-4_ADD_SUBSCRIBER-SERVICE-PROFILE-ROLLBACK
■ A_CSCO-BTS10200_4-4_ADD_SUBSCRIBER-TIME-OF-DAY
■ A_CSCO-BTS10200_4-4_ADD_SUBSCRIBER-TIME-OF-DAY-ROLLBACK
■ A_CSCO-BTS10200_4-4_ADD_TERMINATION
■ A_CSCO-BTS10200_4-4_ADD_TERMINATION-ROLLBACK
■ A_CSCO-BTS10200_4-4_ADD_TWO-DIGIT-SPEED-CALL
■ A_CSCO-BTS10200_4-4_ADD_TWO-DIGIT-SPEED-CALL-ROLLBACK
■ A_CSCO-BTS10200_4-4_ADD_USER-AUTHENTICATION
■ A_CSCO-BTS10200_4-4_ADD_USER-AUTHENTICATION-ROLLBACK
■ A_CSCO-BTS10200_4-4_CHANGE_AOR-TO-SUBSCRIBER
■ A_CSCO-BTS10200_4-4_CONTROL_MGW
■ A_CSCO-BTS10200_4-4_CONTROL_MGW-ROLLBACK
■ A_CSCO-BTS10200_4-4_CONTROL_SUBSCRIBER-TERMINATION
■ A_CSCO-BTS10200_4-4_CONTROL_SUBSCRIBER-TERMINATION-ROLLBACK
■ A_CSCO-BTS10200_4-4_DEL_AOR-TO-SUBSCRIBER
■ A_CSCO-BTS10200_4-4_DEL_AUTHORIZATION-CODE
■ A_CSCO-BTS10200_4-4_DEL_AUTHORIZATION-CODE-GROUP
■ A_CSCO-BTS10200_4-4_DEL_CASUAL-WB-LIST
■ A_CSCO-BTS10200_4-4_DEL_CHANGED-NUMBER
■ A_CSCO-BTS10200_4-4_DEL_DN-TO-SUBSCRIBER
■ A_CSCO-BTS10200_4-4_DEL_INTERNATIONAL-WB-LIST
■ A_CSCO-BTS10200_4-4_DEL_MAC-TO-SUBSCRIBER
■ A_CSCO-BTS10200_4-4_DEL_MGP
■ A_CSCO-BTS10200_4-4_DEL_MGW
ASDL Commands
2-4 Product Title/BookTitle as a Variable
■ A_CSCO-BTS10200_4-4_DEL_NATIONAL-WB-LIST
■ A_CSCO-BTS10200_4-4_DEL_NATURE-OF-DIAL-WB-LIST
■ A_CSCO-BTS10200_4-4_DEL_ONE-DIGIT-SPEED-CALL
■ A_CSCO-BTS10200_4-4_DEL_SCREEN-LIST
■ A_CSCO-BTS10200_4-4_DEL_SUBSCRIBER
■ A_CSCO-BTS10200_4-4_DEL_SUBSCRIBER-FEATURES
■ A_CSCO-BTS10200_4-4_DEL_SUBSCRIBER-PROFILE
■ A_CSCO-BTS10200_4-4_DEL_SUBSCRIBER-SERVICE-PROFILE
■ A_CSCO-BTS10200_4-4_DEL_SUBSCRIBER-TIME-OF-DAY
■ A_CSCO-BTS10200_4-4_DEL_TERMINATION
■ A_CSCO-BTS10200_4-4_DEL_TWO-DIGIT-SPEED-CALL
■ A_CSCO-BTS10200_4-4_DEL_USER-AUTHENTICATION
■ A_CSCO-BTS10200_4-4_EQUIP_SUBSCRIBER-TERMINATION
■ A_CSCO-BTS10200_4-4_MOD_AOR-TO-SUBSCRIBER
■ A_CSCO-BTS10200_4-4_MOD_AOR-TO-SUBSCRIBER-ROLLBACK
■ A_CSCO-BTS10200_4-4_MOD_AUTHORIZATION-CODE
■ A_CSCO-BTS10200_4-4_MOD_AUTHORIZATION-CODE-GROUP
■ A_CSCO-BTS10200_4-4_MOD_AUTHORIZATION-CODE-GROUP-ROLLBACK
■ A_CSCO-BTS10200_4-4_MOD_AUTHORIZATION-CODE-ROLLBACK
■ A_CSCO-BTS10200_4-4_MOD_CHANGED-NUMBER
■ A_CSCO-BTS10200_4-4_MOD_CHANGED-NUMBER-ROLLBACK
■ A_CSCO-BTS10200_4-4_MOD_DN-TO-SUBSCRIBER
■ A_CSCO-BTS10200_4-4_MOD_DN-TO-SUBSCRIBER-ROLLBACK
■ A_CSCO-BTS10200_4-4_MOD_MAC-TO-SUBSCRIBER
■ A_CSCO-BTS10200_4-4_MOD_MAC-TO-SUBSCRIBER-ROLLBACK
■ A_CSCO-BTS10200_4-4_MOD_MGP
■ A_CSCO-BTS10200_4-4_MOD_MGP-ROLLBACK
■ A_CSCO-BTS10200_4-4_MOD_MGW
■ A_CSCO-BTS10200_4-4_MOD_MGW-ROLLBACK
■ A_CSCO-BTS10200_4-4_MOD_ONE-DIGIT-SPEED-CALL
■ A_CSCO-BTS10200_4-4_MOD_ONE-DIGIT-SPEED-CALL-ROLLBACK
■ A_CSCO-BTS10200_4-4_MOD_SCREEN-LIST
■ A_CSCO-BTS10200_4-4_MOD_SCREEN-LIST-ROLLBACK
■ A_CSCO-BTS10200_4-4_MOD_SUBSCRIBER
■ A_CSCO-BTS10200_4-4_MOD_SUBSCRIBER-FEATURES
■ A_CSCO-BTS10200_4-4_MOD_SUBSCRIBER-FEATURES-ROLLBACK
■ A_CSCO-BTS10200_4-4_MOD_SUBSCRIBER-PROFILE
ASDL Commands
Atomic Service Description Layer (ASDL) Commands 2-5
■ A_CSCO-BTS10200_4-4_MOD_SUBSCRIBER-PROFILE-ROLLBACK
■ A_CSCO-BTS10200_4-4_MOD_SUBSCRIBER-ROLLBACK
■ A_CSCO-BTS10200_4-4_MOD_SUBSCRIBER-SERVICE-PROFILE
■ A_CSCO-BTS10200_4-4_MOD_SUBSCRIBER-SERVICE-PROFILE-ROLLBACK
■ A_CSCO-BTS10200_4-4_MOD_SUBSCRIBER-TIME-OF-DAY
■ A_CSCO-BTS10200_4-4_MOD_SUBSCRIBER-TIME-OF-DAY-ROLLBACK
■ A_CSCO-BTS10200_4-4_MOD_TERMINATION
■ A_CSCO-BTS10200_4-4_MOD_TERMINATION-ROLLBACK
■ A_CSCO-BTS10200_4-4_MOD_TWO-DIGIT-SPEED-CALL
■ A_CSCO-BTS10200_4-4_MOD_TWO-DIGIT-SPEED-CALL-ROLLBACK
■ A_CSCO-BTS10200_4-4_MOD_USER-AUTHENTICATION
■ A_CSCO-BTS10200_4-4_MOD_USER-AUTHENTICATION-ROLLBACK
■ A_CSCO-BTS10200_4-4_QRY_AOR-TO-SUBSCRIBER
■ A_CSCO-BTS10200_4-4_QRY_AOR-TO-SUBSCRIBER-ROLLBACK
■ A_CSCO-BTS10200_4-4_QRY_AUTHORIZATION-CODE
■ A_CSCO-BTS10200_4-4_QRY_AUTHORIZATION-CODE-GROUP
■ A_CSCO-BTS10200_4-4_QRY_AUTHORIZATION-CODE-GROUP-ROLLBACK
■ A_CSCO-BTS10200_4-4_QRY_AUTHORIZATION-CODE-ROLLBACK
■ A_CSCO-BTS10200_4-4_QRY_CASUAL-WB-LIST
■ A_CSCO-BTS10200_4-4_QRY_CASUAL-WB-LIST-ROLLBACK
■ A_CSCO-BTS10200_4-4_QRY_CHANGED-NUMBER
■ A_CSCO-BTS10200_4-4_QRY_CHANGED-NUMBER-ROLLBACK
■ A_CSCO-BTS10200_4-4_QRY_CONTROL-MGW-ROLLBACK
■ A_CSCO-BTS10200_4-4_QRY_CONTROL-TERMINATION-ROLLBACK
■ A_CSCO-BTS10200_4-4_QRY_DN-TO-SUBSCRIBER
■ A_CSCO-BTS10200_4-4_QRY_DN-TO-SUBSCRIBER-ROLLBACK
■ A_CSCO-BTS10200_4-4_QRY_INTERNATIONAL-WB-LIST
■ A_CSCO-BTS10200_4-4_QRY_INTERNATIONAL-WB-LIST-ROLLBACK
■ A_CSCO-BTS10200_4-4_QRY_MAC-TO-SUBSCRIBER
■ A_CSCO-BTS10200_4-4_QRY_MAC-TO-SUBSCRIBER-ROLLBACK
■ A_CSCO-BTS10200_4-4_QRY_MGP
■ A_CSCO-BTS10200_4-4_QRY_MGP-ROLLBACK
■ A_CSCO-BTS10200_4-4_QRY_MGW
■ A_CSCO-BTS10200_4-4_QRY_MGW-ROLLBACK
■ A_CSCO-BTS10200_4-4_QRY_NATIONAL-WB-LIST
■ A_CSCO-BTS10200_4-4_QRY_NATIONAL-WB-LIST-ROLLBACK
■ A_CSCO-BTS10200_4-4_QRY_NATURE-OF-DIAL-WB-LIST
ASDL Commands
2-6 Product Title/BookTitle as a Variable
■ A_CSCO-BTS10200_4-4_QRY_NATURE-OF-DIAL-WB-LIST-ROLLBACK
■ A_CSCO-BTS10200_4-4_QRY_ONE-DIGIT-SPEED-CALL
■ A_CSCO-BTS10200_4-4_QRY_ONE-DIGIT-SPEED-CALL-ROLLBACK
■ A_CSCO-BTS10200_4-4_QRY_SCREEN-LIST
■ A_CSCO-BTS10200_4-4_QRY_SCREEN-LIST-ROLLBACK
■ A_CSCO-BTS10200_4-4_QRY_SUBSCRIBER
■ A_CSCO-BTS10200_4-4_QRY_SUBSCRIBER-FEATURES
■ A_CSCO-BTS10200_4-4_QRY_SUBSCRIBER-FEATURES-ROLLBACK
■ A_CSCO-BTS10200_4-4_QRY_SUBSCRIBER-PROFILE
■ A_CSCO-BTS10200_4-4_QRY_SUBSCRIBER-PROFILE-ROLLBACK
■ A_CSCO-BTS10200_4-4_QRY_SUBSCRIBER-ROLLBACK
■ A_CSCO-BTS10200_4-4_QRY_SUBSCRIBER-SERVICE-PROFILE
■ A_CSCO-BTS10200_4-4_QRY_SUBSCRIBER-SERVICE-PROFILE-ROLLBACK
■ A_CSCO-BTS10200_4-4_QRY_SUBSCRIBER-TIME-OF-DAY
■ A_CSCO-BTS10200_4-4_QRY_SUBSCRIBER-TIME-OF-DAY-ROLLBACK
■ A_CSCO-BTS10200_4-4_QRY_TERMINATION
■ A_CSCO-BTS10200_4-4_QRY_TERMINATION-ROLLBACK
■ A_CSCO-BTS10200_4-4_QRY_TWO-DIGIT-SPEED-CALL
■ A_CSCO-BTS10200_4-4_QRY_TWO-DIGIT-SPEED-CALL-ROLLBACK
■ A_CSCO-BTS10200_4-4_QRY_USER-AUTHENTICATION
■ A_CSCO-BTS10200_4-4_QRY_USER-AUTHENTICATION-ROLLBACK
■ A_CSCO-BTS10200_4-4_SHOW_TRANSACTION-QUEUE
■ A_CSCO-BTS10200_4-4_UNEQUIP_SUBSCRIBER-TERMINATION
A_CSCO-BTS10200_4-4_ADD_AOR-TO-SUBSCRIBERAdd address of record to subscriber. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsSip.addAorToSubscriber.
Table 2–2 A_CSCO-BTS10200_4-4_ADD_AOR-TO-SUBSCRIBER
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE Identifier N/A N/A S R
AOR_ID Address of record id for the subscriber. N/A N/A C R
SUB_ID Subscriber ID N/A N/A S R
ASDL_COUNTER ASDL sequence counter in CSDL. For internal processing use only.
N/A N/A S O
TRANSACTION_ID Transaction ID returned by NE after processing MML command.
N/A N/A C O
ASDL Commands
Atomic Service Description Layer (ASDL) Commands 2-7
MML commands
MML Syntax :
MML1: add aor2sub aor-id=<AOR_ID[1]>;sub-id=<SUB_ID>;...MMLn: add aor2sub aor-id=<AOR_ID[n]>;sub-id=<SUB_ID>;
Output ParametersTRANSACTION_ID compound parameter
ASDL_COUNTER
A_CSCO-BTS10200_4-4_ADD_AOR-TO-SUBSCRIBER-ROLLBACKAdd address of record to subscriber. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsSip.addAorToSubscriberRollback.
MML commands
MML Syntax :
MML1: add aor2sub aor-id=<OLD_AOR_ID[1]>;sub-id=<OLD_SUB_ID>;...MMLn: add aor2sub aor-id=<OLD_AOR_ID[n]>;sub-id=<OLD_SUB_ID>;
Output ParametersTRANSACTION_ID compound parameter
ASDL_COUNTER
A_CSCO-BTS10200_4-4_ADD_AUTHORIZATION-CODEAdd an authorization code. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsSub.addAuthorizationCode.
Table 2–3 A_CSCO-BTS10200_4-4_ADD_AOR-TO-SUBSCRIBER-ROLLBACK
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE Identifier N/A N/A S R
OLD_AOR_ID Address of record id for the subscriber. N/A N/A C R
OLD_SUB_ID Subscriber ID N/A N/A S R
ASDL_COUNTER ASDL sequence counter in CSDL. For internal processing use only.
N/A N/A S O
TRANSACTION_ID Transaction ID returned by NE after processing MML command.
N/A N/A C O
ASDL Commands
2-8 Product Title/BookTitle as a Variable
MML commands
MML Syntax :
add auth-code id=<AUTH_ID>;auth-code-grp-id=<AUTH_CODE_GROUP_ID>; active=<AUTH_ACTIVE>;cos-restrict-id=<COS_RESTRICT_ID>;
Output ParametersTRANSACTION_ID compound parameter
ASDL_COUNTER
A_CSCO-BTS10200_4-4_ADD_AUTHORIZATION-CODE-GROUPAdd an authorization code group. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsSub.addAuthorizationCodeGroup.
MML commands
MML Syntax :
Table 2–4 A_CSCO-BTS10200_4-4_ADD_AUTHORIZATION-CODE
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE identifier. N/A N/A S R
AUTH_ID Dialed authorization code. N/A N/A S R
AUTH_CODE_GROUP_ID
Authorization code group ID. N/A N/A S R
AUTH_ACTIVE Indicates the status of the authorization code.
N/A N/A S O
COS_RESTRICT_ID Class of service restriction ID. N/A N/A S O
TRANSACTION_ID Transaction ID returned by NE after MML command is processed.
N/A N/A C O
ASDL_COUNTER ASDL sequence number in CSDL. For internal processing use only.
N/A N/A S O
Table 2–5 A_CSCO-BTS10200_4-4_ADD_AUTHORIZATION-CODE-GROUP
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE identifier. N/A N/A S R
AUTH_CODE_GROUP_ID
Authorization code group ID. N/A N/A S R
DESCRIPTION Service provider's description of authorization code.
N/A N/A S O
TRANSACTION_ID Transaction ID returned by NE after MML command is processed.
N/A N/A C O
ASDL_COUNTER ASDL sequence number in CSDL. For internal processing use only.
N/A N/A S O
ASDL Commands
Atomic Service Description Layer (ASDL) Commands 2-9
add auth-code-grp id=<AUTH_CODE_GROUP_ID>;description=<DESCRIPTION>;
Output ParametersTRANSACTION_ID compound parameter
ASDL_COUNTER
A_CSCO-BTS10200_4-4_ADD_AUTHORIZATION-CODE-GROUP-ROLLBACKAdd an authorization code group. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsSub.addAuthorizationCodeGroupRollback.
MML commands
MML Syntax :
add auth-code-grp id=<OLD_AUTH_CODE_GROUP_ID>;description=<OLD_DESCRIPTION>;
Output ParametersTRANSACTION_ID compound parameter
ASDL_COUNTER
A_CSCO-BTS10200_4-4_ADD_AUTHORIZATION-CODE-ROLLBACKAdd an authorization code. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsSub.addAuthorizationCodeRollback.
Table 2–6 A_CSCO-BTS10200_4-4_ADD_AUTHORIZATION-CODE-GROUP-ROLLBACK
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE identifier. N/A N/A S R
OLD_AUTH_CODE_GROUP_ID
Authorization code group ID. N/A N/A S R
OLD_DESCRIPTION Service provider's description of authorization code.
N/A N/A S O
TRANSACTION_ID Transaction ID returned by NE after MML command is processed.
N/A N/A C O
ASDL_COUNTER ASDL sequence number in CSDL. For internal processing use only.
N/A N/A S O
Table 2–7 A_CSCO-BTS10200_4-4_ADD_AUTHORIZATION-CODE-ROLLBACK
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE identifier. N/A N/A S R
OLD_AUTH_ID Dialed authorization code. N/A N/A S R
OLD_AUTH_CODE_GROUP_ID
Authorization code group ID. N/A N/A S R
ASDL Commands
2-10 Product Title/BookTitle as a Variable
MML commands
MML Syntax :
add auth-code id=<OLD_AUTH_ID>;auth-code-grp-id=<OLD_AUTH_CODE_GROUP_ID>;active=<AUTH_ACTIVE>;cos-restrict-id=<OLD_COS_RESTRICT_ID>;
Output ParametersTRANSACTION_ID compound parameter
ASDL_COUNTER
A_CSCO-BTS10200_4-4_ADD_CASUAL-WB-LISTAdd a casual white black list. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsSub.addCasualWbList.
MML commands
MML Syntax :
add casual-wb-list cos-restrict-id=<COS_RESTRICT_ID>;carrier=<CARRIER>;
Output ParametersTRANSACTION_ID compound parameter
ASDL_COUNTER
AUTH_ACTIVE Indicates the status of the authorization code.
N/A N/A S O
OLD_COS_RESTRICT_ID
Class of service restriction ID. N/A N/A S O
TRANSACTION_ID Transaction ID returned by NE after MML command is processed.
N/A N/A C O
ASDL_COUNTER ASDL sequence number in CSDL. For internal processing use only.
N/A N/A S O
Table 2–8 A_CSCO-BTS10200_4-4_ADD_CASUAL-WB-LIST
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE identifier. N/A N/A S R
COS_RESTRICT_ID Class of service restriction ID. N/A N/A S R
CARRIER Carrier Identification Code (CIC). N/A N/A S R
TRANSACTION_ID Transaction ID returned by NE after MML command is processed.
N/A N/A C O
ASDL_COUNTER ASDL sequence number in CSDL. For internal processing use only.
N/A N/A S O
Table 2–7 (Cont.) A_CSCO-BTS10200_4-4_ADD_AUTHORIZATION-CODE-ROLLBACK
Parameter Name Description RangeDefault Value Type Class
ASDL Commands
Atomic Service Description Layer (ASDL) Commands 2-11
A_CSCO-BTS10200_4-4_ADD_CASUAL-WB-LIST-ROLLBACKAdd a casual white black list. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsSub.addCasualWbListRollback.
MML commands
MML Syntax :
add casual-wb-list cos-restrict-id=<OLD_COS_RESTRICT_ID>;carrier=<OLD_CARRIER>;
Output ParametersTRANSACTION_ID compound parameter
ASDL_COUNTER
A_CSCO-BTS10200_4-4_ADD_CHANGED-NUMBERAdd a changed number. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsSub.addChangednumber.
MML commands
MML Syntax :
add changed-number old-dn=<OLD_DN>;new-dn=<NEW_DN>;
Table 2–9 A_CSCO-BTS10200_4-4_ADD_CASUAL-WB-LIST-ROLLBACK
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE identifier. N/A N/A S R
OLD_COS_RESTRICT_ID
Class of service restriction ID. N/A N/A S R
OLD_CARRIER Carrier Identification Code (CIC). N/A N/A S R
TRANSACTION_ID Transaction ID returned by NE after MML command is processed.
N/A N/A C O
ASDL_COUNTER ASDL sequence number in CSDL. For internal processing use only.
N/A N/A S O
Table 2–10 A_CSCO-BTS10200_4-4_ADD_CHANGED-NUMBER
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE identifier. N/A N/A S R
OLD_DN The old subscriber directory number. N/A N/A S R
NEW_DN The changed or new subscriber DN. N/A N/A S R
TRANSACTION_ID Transaction ID returned by NE after MML command is processed.
N/A N/A C O
ASDL_COUNTER ASDL sequence number in CSDL. For internal processing use only.
N/A N/A S O
ASDL Commands
2-12 Product Title/BookTitle as a Variable
Output ParametersTRANSACTION_ID compound parameter
ASDL_COUNTER
A_CSCO-BTS10200_4-4_ADD_CHANGED-NUMBER-ROLLBACKAdd a changed number. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsSub.addChangednumberRollback.
MML commands
MML Syntax :
add changed-number old-dn=<OLD_OLD_DN>;new-dn=<OLD_NEW_DN>;
Output ParametersTRANSACTION_ID compound parameter
ASDL_COUNTER
A_CSCO-BTS10200_4-4_ADD_DN-TO-SUBSCRIBERAdd a DN2Subscriber. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsSub.addDnToSubscriber.
Table 2–11 A_CSCO-BTS10200_4-4_ADD_CHANGED-NUMBER-ROLLBACK
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE identifier. N/A N/A S R
OLD_OLD_DN The old subscriber directory number. N/A N/A S R
OLD_NEW_DN The changed or new subscriber DN. N/A N/A S R
TRANSACTION_ID Transaction ID returned by NE after MML command is processed.
N/A N/A C O
ASDL_COUNTER ASDL sequence number in CSDL. For internal processing use only.
N/A N/A S O
Table 2–12 A_CSCO-BTS10200_4-4_ADD_DN-TO-SUBSCRIBER
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE identifier. N/A N/A S R
OFFICE_CODE_INDEX
Office code index. N/A N/A S R
DN Directory number assigned to a subscriber.
N/A N/A S R
DN2SUB_STATUS Status. N/A N/A S R
FDN Full directory number. N/A N/A S O
FROM_DN From directory number. N/A N/A S O
ASDL Commands
Atomic Service Description Layer (ASDL) Commands 2-13
MML commands
MML Syntax :
add dn2subscriber office-code-index=<OFFICE_CODE_INDEX >;dn=<DN>;status=<STATUS>;fdn=<FDN>;from-dn=<FROM_DN>;to-dn=<TO_DN>;annc-id=<ANOUNCEMENT_ID>;sub-id=<SUB_ID>;ring-type=<RING_TYPE>;lnptrigger=<LNP_TRIGGER>;np-reserved=<NP_RESERVED>;
Output ParametersTRANSACTION_ID compound parameter
ASDL_COUNTER
A_CSCO-BTS10200_4-4_ADD_DN-TO-SUBSCRIBER-ROLLBACKAdd a DN2Subscriber. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsSub.addDnToSubscriberRollback.
TO_DN To directory number. N/A N/A S O
ANOUNCEMENT_ID Announcement ID. N/A N/A S O
SUB_ID Subscriber ID of the calling directory number.
N/A N/A S O
NP_RESERVED Local number portability and number pooling.
N/A N/A S O
TRANSACTION_ID Transaction ID returned by NE after MML command is processed.
N/A N/A C O
ASDL_COUNTER ASDL sequence number in CSDL. For internal processing use only.
N/A N/A S O
Table 2–13 A_CSCO-BTS10200_4-4_ADD_DN-TO-SUBSCRIBER-ROLLBACK
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE identifier. N/A N/A S R
OLD_OFFICE_CODE_INDEX
Office code index. N/A N/A S R
OLD_DN Directory number assigned to a subscriber.
N/A N/A S R
OLD_DN2SUB_STATUS
Status. N/A N/A S R
OLD_FDN Full directory number. N/A N/A S O
OLD_FROM_DN From directory number. N/A N/A S O
OLD_TO_DN To directory number. N/A N/A S O
OLD_ANOUNCEMENT_ID
Announcement ID. N/A N/A S O
Table 2–12 (Cont.) A_CSCO-BTS10200_4-4_ADD_DN-TO-SUBSCRIBER
Parameter Name Description RangeDefault Value Type Class
ASDL Commands
2-14 Product Title/BookTitle as a Variable
MML commands
MML Syntax :
add dn2subscriber office-code-index=<OLD_OFFICE_CODE_INDEX >;dn=<OLD_DN>;status=<OLD_STATUS>;fdn=<OLD_FDN>;from-dn=<OLD_FROM_DN>;to-dn=<OLD_TO_DN>;annc-id=<OLD_ANOUNCEMENT_ID>;sub-id=<OLD_SUB_ID>;ring-type=<OLD_RING_TYPE>;lnptrigger=<OLD_LNP_TRIGGER>;np-reserved=<OLD_NP_RESERVED>;
Output ParametersTRANSACTION_ID compound parameter
ASDL_COUNTER
A_CSCO-BTS10200_4-4_ADD_INTERNATIONAL-WB-LISTAdd an International white black List. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsSub.addInternationalWbList.
MML commands
MML Syntax :
add intl-wb-list cos-restrict-id=<COS_RESTRICT_ID>;cc-nn=<COUNTRY_CODE_NATIONAL_
OLD_SUB_ID Subscriber ID of the calling directory number.
N/A N/A S O
OLD_NP_RESERVED Local number portability and number pooling.
N/A N/A S O
TRANSACTION_ID Transaction ID returned by NE after MML command is processed.
N/A N/A C O
ASDL_COUNTER ASDL sequence number in CSDL. For internal processing use only.
N/A N/A S O
Table 2–14 A_CSCO-BTS10200_4-4_ADD_INTERNATIONAL-WB-LIST
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE identifier. N/A N/A S R
COS_RESTRICT_ID Class of service restriction ID. N/A N/A S R
COUNTRY_CODE_NATIONAL_NUMBER
Country code (CC) and national number (NN).
N/A N/A S R
TRANSACTION_ID Transaction ID returned by NE after MML command is processed.
N/A N/A C O
ASDL_COUNTER ASDL sequence number in CSDL. For internal processing use only.
N/A N/A S O
Table 2–13 (Cont.) A_CSCO-BTS10200_4-4_ADD_DN-TO-SUBSCRIBER-ROLLBACK
Parameter Name Description RangeDefault Value Type Class
ASDL Commands
Atomic Service Description Layer (ASDL) Commands 2-15
NUMBER>;
Output ParametersTRANSACTION_ID compound parameter
ASDL_COUNTER
A_CSCO-BTS10200_4-4_ADD_INTERNATIONAL-WB-LIST-ROLLBACKAdd an International white black List. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsSub.addInternationalWbListRollback.
MML commands
MML Syntax :
add intl-wb-list cos-restrict-id=<OLD_COS_RESTRICT_ID>;cc-nn=<OLD_COUNTRY_CODE_NATIONAL_NUMBER>;
Output ParametersTRANSACTION_ID compound parameter
ASDL_COUNTER
A_CSCO-BTS10200_4-4_ADD_MAC-TO-SUBSCRIBERAdd a MAC address to subscriber. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsSip.addMacToSubscriber.
Table 2–15 A_CSCO-BTS10200_4-4_ADD_INTERNATIONAL-WB-LIST-ROLLBACK
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE identifier. N/A N/A S R
OLD_COS_RESTRICT_ID
Class of service restriction ID. N/A N/A S R
OLD_COUNTRY_CODE_NATIONAL_NUMBER
Country code (CC) and national number (NN).
N/A N/A S R
TRANSACTION_ID Transaction ID returned by NE after MML command is processed.
N/A N/A C O
ASDL_COUNTER ASDL sequence number in CSDL. For internal processing use only.
N/A N/A S O
Table 2–16 A_CSCO-BTS10200_4-4_ADD_MAC-TO-SUBSCRIBER
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE Identifier N/A N/A S R
MAC_ID Mac Address N/A N/A C R
ASDL Commands
2-16 Product Title/BookTitle as a Variable
MML commands
MML Syntax :
add mac2sub mac-id=<MAC_ID>;sub-id=<SUB_ID>;
Output ParametersTRANSACTION_ID compound parameter
ASDL_COUNTER
A_CSCO-BTS10200_4-4_ADD_MAC-TO-SUBSCRIBER-ROLLBACKAdd a MAC address to subscriber. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsSip.addMacToSubscriberRollback.
MML commands
MML Syntax :
add mac2sub mac-id=<OLD_MAC_ID>;sub-id=<OLD_SUB_ID>;
Output ParametersTRANSACTION_ID compound parameter
ASDL_COUNTER
SUB_ID Subscriber ID. N/A N/A S O
ASDL_COUNTER ASDL sequence counter in CSDL. For internal processing use only.
N/A N/A S O
TRANSACTION_ID Transaction ID returned by NE after processing MML command.
N/A N/A C O
Table 2–17 A_CSCO-BTS10200_4-4_ADD_MAC-TO-SUBSCRIBER-ROLLBACK
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE Identifier N/A N/A S R
OLD_MAC_ID Mac Address N/A N/A C R
OLD_SUB_ID Subscriber ID. N/A N/A S O
ASDL_COUNTER ASDL sequence counter in CSDL. For internal processing use only.
N/A N/A S O
TRANSACTION_ID Transaction ID returned by NE after processing MML command.
N/A N/A C O
Table 2–16 (Cont.) A_CSCO-BTS10200_4-4_ADD_MAC-TO-SUBSCRIBER
Parameter Name Description RangeDefault Value Type Class
ASDL Commands
Atomic Service Description Layer (ASDL) Commands 2-17
A_CSCO-BTS10200_4-4_ADD_MGPAdd a media gateway provisioning. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsMgp.addMgp.
MML commands
MML Syntax :
add mgp ip-addr=<IP_ADDR>;type=<MGP_TYPE>;user-name=<USER_NAME>;password=<PASSWORD>;
Output ParametersTRANSACTION_ID compound parameter
ASDL_COUNTER
A_CSCO-BTS10200_4-4_ADD_MGP-ROLLBACKAdd a media gateway provisioning. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsMgp.addMgpRollback.
Table 2–18 A_CSCO-BTS10200_4-4_ADD_MGP
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE identifier. N/A N/A S R
IP_ADDR IP address of the device. N/A N/A S R
MGP_TYPE Type of gateway. N/A N/A S R
USER_NAME User name used to access the gateway. N/A N/A S R
MGP_PASSWORD Password used to access the gateway. N/A N/A S R
ASDL_COUNTER ASDL sequence counter in CSDL. For internal processing use only.
N/A N/A S O
TRANSACTION_ID Transaction ID returned by NE after processing MML command.
N/A N/A C O
Table 2–19 A_CSCO-BTS10200_4-4_ADD_MGP-ROLLBACK
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE identifier. N/A N/A S R
OLD_IP_ADDR IP address of the device. N/A N/A S R
OLD_MGP_TYPE Type of gateway. N/A N/A S R
OLD_USER_NAME User name used to access the gateway. N/A N/A S R
OLD_MGP_PASSWORD
Password used to access the gateway. N/A N/A S R
ASDL_COUNTER ASDL sequence counter in CSDL. For internal processing use only.
N/A N/A S O
TRANSACTION_ID Transaction ID returned by NE after processing MML command.
N/A N/A C O
ASDL Commands
2-18 Product Title/BookTitle as a Variable
MML commands
MML Syntax :
add mgp ip-addr=<OLD_IP_ADDR>;type=<OLD_MGP_TYPE>;user-name=<OLD_USER_NAME>;password=<OLD_PASSWORD>;
Output ParametersTRANSACTION_ID compound parameter
ASDL_COUNTER
A_CSCO-BTS10200_4-4_ADD_MGWAdd a media gateway. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsMgw.addMgw.
MML commands
MML Syntax :
add mgw id=<MGW_ID>; tsap-addr=<TSAP_ADDR>; call-agent-id=<CA_ID>; mgwprofile-id=<MGW_PROFILE_ID>; type=<TYPE>; aggr-id=<AGGR_ID>; call-agentcontrol-port=<CALL_AGENT_CONTROL_PORT>; status=<STATUS>;
Table 2–20 A_CSCO-BTS10200_4-4_ADD_MGW
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE Identifier N/A N/A S R
MGW_ID The media gateway identifier (1-32 ASCII characters).
N/A N/A S R
CALL_AGENT_ID ID of the call-agent the subscriber is assigned to in the Call Agent table (1-16 ASCII characters).
N/A N/A S R
MGW_PROFILE_ID ID of the mgw-profile the subscriber is assigned to in the MGW Profile table (1-16 ASCII characters).
N/A N/A S R
TSAP_ADDR Domain name, IP address or IP address and port number of the device to manage. (1-64 ASCII characters)
N/A N/A S R
MGW_TYPE Type of gateway. N/A N/A S R
AGGR_ID ID of the aggregation devic cable modem termination system (1-16 ASCII characters).
N/A N/A S O
CALL_AGENT_CONTROL_PORT
Call Agent MGCP listening port for the MGW.
N/A N/A S O
MGW_STATUS Service state of the MGW. N/A N/A S O
ASDL_COUNTER ASDL sequence counter in CSDL. For internal processing use only.
N/A N/A S O
TRANSACTION_ID Transaction ID returned by NE after processing MML command.
N/A N/A C O
ASDL Commands
Atomic Service Description Layer (ASDL) Commands 2-19
Output ParametersTRANSACTION_ID compound parameter
ASDL_COUNTER
A_CSCO-BTS10200_4-4_ADD_MGW-ROLLBACKAdd a media gateway. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsMgw.addMgwRollback.
MML commands
MML Syntax :
add mgw id=<OLD_MGW_ID>; tsap-addr=<OLD_TSAP_ADDR>; call-agent-id=<OLD_CA_ID>; mgwprofile-id=<OLD_MGW_PROFILE_ID>; type=<OLD_TYPE>; aggr-id=<OLD_AGGR_ID>; call-agentcontrol-port=<OLD_CALL_AGENT_CONTROL_PORT>; status=<OLD_STATUS>;
Output ParametersTRANSACTION_ID compound parameter
ASDL_COUNTER
Table 2–21 A_CSCO-BTS10200_4-4_ADD_MGW-ROLLBACK
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE Identifier N/A N/A S R
OLD_MGW_ID The media gateway identifier (1-32 ASCII characters).
N/A N/A S R
OLD_CALL_AGENT_ID
ID of the call-agent the subscriber is assigned to in the Call Agent table (1-16 ASCII characters).
N/A N/A S R
OLD_MGW_PROFILE_ID
ID of the mgw-profile the subscriber is assigned to in the MGW Profile table (1-16 ASCII characters).
N/A N/A S R
OLD_TSAP_ADDR Domain name, IP address or IP address and port number of the device to manage. (1-64 ASCII characters)
N/A N/A S R
OLD_MGW_TYPE Type of gateway. N/A N/A S R
OLD_AGGR_ID ID of the aggregation devic cable modem termination system (1-16 ASCII characters).
N/A N/A S O
OLD_CALL_AGENT_CONTROL_PORT
Call Agent MGCP listening port for the MGW.
N/A N/A S O
OLD_MGW_STATUS Service state of the MGW. N/A N/A S O
ASDL_COUNTER ASDL sequence counter in CSDL. For internal processing use only.
N/A N/A S O
TRANSACTION_ID Transaction ID returned by NE after processing MML command.
N/A N/A C O
ASDL Commands
2-20 Product Title/BookTitle as a Variable
A_CSCO-BTS10200_4-4_ADD_NATIONAL-WB-LISTAdd a national white black list. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsSub.addNationalWbList.
MML commands
MML Syntax :
add nanp-wb-list cos-restrict-id=<COS_RESTRICT_ID>;digitstring=<DIGIT_STRING>;
Output ParametersTRANSACTION_ID compound parameter
ASDL_COUNTER
A_CSCO-BTS10200_4-4_ADD_NATIONAL-WB-LIST-ROLLBACKAdd a national white black list. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsSub.addNationalWbListRollback.
MML commands
MML Syntax :
add nanp-wb-list cos-restrict-id=<OLD_COS_RESTRICT_ID>;digitstring=<OLD_DIGIT_
Table 2–22 A_CSCO-BTS10200_4-4_ADD_NATIONAL-WB-LIST
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE identifier. N/A N/A S R
COS_RESTRICT_ID Class of service restriction ID. N/A N/A S R
DIGIT_STRING Digit string using dashes. N/A N/A S R
TRANSACTION_ID Transaction ID returned by NE after MML command is processed.
N/A N/A C O
ASDL_COUNTER ASDL sequence number in CSDL. For internal processing use only.
N/A N/A S O
Table 2–23 A_CSCO-BTS10200_4-4_ADD_NATIONAL-WB-LIST-ROLLBACK
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE identifier. N/A N/A S R
OLD_COS_RESTRICT_ID
Class of service restriction ID. N/A N/A S R
OLD_DIGIT_STRING Digit string using dashes. N/A N/A S R
TRANSACTION_ID Transaction ID returned by NE after MML command is processed.
N/A N/A C O
ASDL_COUNTER ASDL sequence number in CSDL. For internal processing use only.
N/A N/A S O
ASDL Commands
Atomic Service Description Layer (ASDL) Commands 2-21
STRING>;
Output ParametersTRANSACTION_ID compound parameter
ASDL_COUNTER
A_CSCO-BTS10200_4-4_ADD_NATURE-OF-DIAL-WB-LISTAdd a nature of dial white black list. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsSub.addNatureOfDialWbList.
MML commands
MML Syntax :
add nod-wb-list cos-restrict-id=<COS_RESTRICT_ID>;nod=<NATURE_OF_DIAL>;
Output ParametersTRANSACTION_ID compound parameter
ASDL_COUNTER
A_CSCO-BTS10200_4-4_ADD_NATURE-OF-DIAL-WB-LIST-ROLLBACKAdd a nature of dial white black list. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsSub.addNatureOfDialWbListRollback.
Table 2–24 A_CSCO-BTS10200_4-4_ADD_NATURE-OF-DIAL-WB-LIST
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE identifier. N/A N/A S R
COS_RESTRICT_ID Class of service restriction ID. N/A N/A S R
NATURE_OF_DIAL Nature of dial. N/A N/A S R
TRANSACTION_ID Transaction ID returned by NE after MML command is processed.
N/A N/A C O
ASDL_COUNTER ASDL sequence number in CSDL. For internal processing use only.
N/A N/A S O
Table 2–25 A_CSCO-BTS10200_4-4_ADD_NATURE-OF-DIAL-WB-LIST-ROLLBACK
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE identifier. N/A N/A S R
OLD_COS_RESTRICT_ID
Class of service restriction ID. N/A N/A S R
ASDL Commands
2-22 Product Title/BookTitle as a Variable
MML commands
MML Syntax :
add nod-wb-list cos-restrict-id=<OLD_COS_RESTRICT_ID>;nod=<OLD_NATURE_OF_DIAL>;
Output ParametersTRANSACTION_ID compound parameter
ASDL_COUNTER
A_CSCO-BTS10200_4-4_ADD_ONE-DIGIT-SPEED-CALLAdd a speed call one digit. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsSub.addOneDigitSpeedCall.
MML commands
OLD_NATURE_OF_DIAL
Nature of dial. N/A N/A S R
TRANSACTION_ID Transaction ID returned by NE after MML command is processed.
N/A N/A C O
ASDL_COUNTER ASDL sequence number in CSDL. For internal processing use only.
N/A N/A S O
Table 2–26 A_CSCO-BTS10200_4-4_ADD_ONE-DIGIT-SPEED-CALL
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE identifier. N/A N/A S R
SUB_ID Subscriber ID. N/A N/A S R
DN2 Directory number. N/A N/A S O
DN3 Directory number. N/A N/A S O
DN4 Directory number. N/A N/A S O
DN5 Directory number. N/A N/A S O
DN6 Directory number. N/A N/A S O
DN7 Directory number. N/A N/A S O
DN8 Directory number. N/A N/A S O
DN9 Directory number. N/A N/A S O
TRANSACTION_ID Transaction ID returned by NE after MML command is processed.
N/A N/A C O
ASDL_COUNTER ASDL sequence number in CSDL. For internal processing use only.
N/A N/A S O
Table 2–25 (Cont.) A_CSCO-BTS10200_4-4_ADD_NATURE-OF-DIAL-WB-LIST-ROLLBACK
Parameter Name Description RangeDefault Value Type Class
ASDL Commands
Atomic Service Description Layer (ASDL) Commands 2-23
MML Syntax :
add sc1d sub-id=<SUB_ID>;dn2=<DN2>;dn3=<DN3>;dn4=<DN4>;dn5=<DN5>;dn6=<DN6>;dn7=<DN7>;dn8=<DN8>;dn9=<DN9>;
Output ParametersTRANSACTION_ID compound parameter
ASDL_COUNTER
A_CSCO-BTS10200_4-4_ADD_ONE-DIGIT-SPEED-CALL-ROLLBACKAdd a speed call one digit. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsSub.addOneDigitSpeedCallRollback.
MML commands
MML Syntax :
add sc1d sub-id=<OLD_SUB_ID>;dn2=<OLD_DN2>;dn3=<OLD_DN3>;dn4=<OLD_DN4>;dn5=<OLD_DN5>;dn6=<OLD_DN6>;dn7=<OLD_DN7>;dn8=<OLD_DN8>;dn9=<OLD_DN9>;
Output ParametersTRANSACTION_ID compound parameter
ASDL_COUNTER
Table 2–27 A_CSCO-BTS10200_4-4_ADD_ONE-DIGIT-SPEED-CALL-ROLLBACK
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE identifier. N/A N/A S R
OLD_SUB_ID Subscriber ID. N/A N/A S R
OLD_DN2 Directory number. N/A N/A S O
OLD_DN3 Directory number. N/A N/A S O
OLD_DN4 Directory number. N/A N/A S O
OLD_DN5 Directory number. N/A N/A S O
OLD_DN6 Directory number. N/A N/A S O
OLD_DN7 Directory number. N/A N/A S O
OLD_DN8 Directory number. N/A N/A S O
OLD_DN9 Directory number. N/A N/A S O
TRANSACTION_ID Transaction ID returned by NE after MML command is processed.
N/A N/A C O
ASDL_COUNTER ASDL sequence number in CSDL. For internal processing use only.
N/A N/A S O
ASDL Commands
2-24 Product Title/BookTitle as a Variable
A_CSCO-BTS10200_4-4_ADD_RAW-COMMANDSend a raw command to the remote NE. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsAdmin.addRawCommand.
MML commands
MML Syntax :
N/A
Output ParametersVS_RESPONSE[n] as info parameter
A_CSCO-BTS10200_4-4_ADD_SCREEN-LISTAdd screening list editing. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsSub.addScreenList.
MML commands
MML Syntax :
add sle sub-id=<SUB_ID>;fname=<FEATURE_NAME>;dn=<DN>;anonymous=<ANONYMOUS>;t-stamp=<TIMESTAMP> ;
Table 2–28 A_CSCO-BTS10200_4-4_ADD_RAW-COMMAND
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE identifier. N/A N/A S R
RAW_COMMAND Raw Command. N/A N/A S R
Table 2–29 A_CSCO-BTS10200_4-4_ADD_SCREEN-LIST
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE identifier. N/A N/A S R
SUB_ID Subscriber ID from the subscriber. N/A N/A S R
FEATURE_NAME Type of screening feature. N/A N/A C R
DN Directory number entry. N/A N/A C R
ANONYMOUS Anonymous entry. Permitted values are: Y/N.
N/A N/A C O
TIMESTAMP The date and time the entry was added. Integer values permitted from 1 to 9999.
N/A N/A C O
TRANSACTION_ID Transaction ID returned by NE after MML command is processed.
N/A N/A C O
ASDL_COUNTER ASDL sequence number in CSDL. For internal processing use only.
N/A N/A S O
ASDL Commands
Atomic Service Description Layer (ASDL) Commands 2-25
Output ParametersTRANSACTION_ID compound parameter
ASDL_COUNTER
A_CSCO-BTS10200_4-4_ADD_SCREEN-LIST-ROLLBACKAdd screening list editing. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsSub.addScreenListRollback.
MML commands
MML Syntax :
add sle sub-id=<OLD_SUB_ID>;fname=<OLD_FEATURE_NAME>;dn=<OLD_DN>;anonymous=<OLD_ANONYMOUS>;t-stamp=<OLD_TIMESTAMP> ;
Output ParametersTRANSACTION_ID compound parameter
ASDL_COUNTER
A_CSCO-BTS10200_4-4_ADD_SUBSCRIBERAdd a subscriber. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsSub.addSubscriber.
Table 2–30 A_CSCO-BTS10200_4-4_ADD_SCREEN-LIST-ROLLBACK
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE identifier. N/A N/A S R
OLD_SUB_ID Subscriber ID from the subscriber. N/A N/A S R
OLD_FEATURE_NAME
Type of screening feature. N/A N/A C R
OLD_DN Directory number entry. N/A N/A C R
OLD_ANONYMOUS Anonymous entry. Permitted values are: Y/N.
N/A N/A C O
OLD_TIMESTAMP The date and time the entry was added. Integer values permitted from 1 to 9999.
N/A N/A C O
TRANSACTION_ID Transaction ID returned by NE after MML command is processed.
N/A N/A C O
ASDL_COUNTER ASDL sequence number in CSDL. For internal processing use only.
N/A N/A S O
ASDL Commands
2-26 Product Title/BookTitle as a Variable
Table 2–31 A_CSCO-BTS10200_4-4_ADD_SUBSCRIBER
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE identifier. N/A N/A S R
ID Subscriber ID. N/A N/A S R
ADDRESS1 Address of the subscriber. N/A N/A S O
ADDRESS2 Address of the subscriber. N/A N/A S O
AOR_ID Address of the record ID. N/A N/A S O
BILLING_DN Billing DN. N/A N/A S O
BILLING_TYPE Subscriber billing type. N/A N/A S O
CATEGORY Subscriber category. N/A N/A S O
CITY City of subscriber. N/A N/A S O
COS_RESTRICT_ID COS restriction ID. N/A N/A S O
COUNTRY Country of subscriber. N/A N/A S O
CTXG_ID ID in Centrex Group table. N/A N/A S O
DN1 Subscriber directory number (DN). N/A N/A S O
GROUP Group. N/A N/A S O
H323_TERM_ID The termination ID for an H323 terminal.
N/A N/A S O
IMMEDIATE_RELEASE
Immediate release procedure. N/A N/A S O
LANGUAGE Subscriber's preferred spoken language. N/A N/A S O
MAC_ID MAC ID for the subscriber. N/A N/A S O
MGW_ID Media Gateway ID. N/A N/A S O
MLHG_ID Multiline Hunt Group ID. N/A N/A S O
MLHG_PREF_LIST_ID MLGH preference list ID. N/A N/A S O
MWI_ON Message waiting indicator on status. N/A N/A S O
NAME Subscriber name. N/A N/A S O
PIC1 Preferred interLATA carrier (PIC). N/A N/A S O
PIC2 Preferred interLATA carrier (PIC) 2. N/A N/A S O
PIC3 Preferred interLATA carrier (PIC) 3. N/A N/A S O
POLICY_ID Policy ID. N/A N/A S O
PORTED_IN Permitted values are: Y/N. N/A N/A S O
PRIVACY Privacy. N/A N/A S O
PRIVACY_MANAGER_ID
Privacy manager ID. N/A N/A S O
QOS_ID QOS index. N/A N/A S O
RING_TYPE_DN1 Ring type for DN1. N/A N/A S O
SEND_BDN_AS_CPN Send the billing DN of the subscriber as a CPN.
N/A N/A S O
SEND_BDN_FOREMG Send the billing. N/A N/A S O
ASDL Commands
Atomic Service Description Layer (ASDL) Commands 2-27
MML commands
MML Syntax :
add subscriber id=<ID>;address1=<ADDRESS1>;address2=<ADDRESS2>;aor-id=<AOR_ID>;billing-dn=<BILLING_DN>;billing-type=<BILLING_TYPE>;category=<CATEGORY>;city=<CITY>;cos-restrict-id=<COS_RESTRICT_ID>;country=<COUNTRY>;ctxg-id=<CTXG_ID>;dn1=<DN1>;grp=<GROUP>;h323-term-id=<H323_TERM_ID>;immediate-release=<IMMEDIATE_RELEASE > ;language=<LANGUAGE > ;mac-id=<MAC_ID>;mgw-id=<MGW_ID>;mlhg-id=<MLHG_ID>;mlhg-pref-list-id=<MLHG_PREF_LIST_ID>;mwi-on=<MWI_ON>;name=<NAME>;pic1=<PIC1>;pic2=<PIC2>;pic3=<PIC3>;policy-id=<POLICY_ID > ;ported-in=<PORTED_IN>;privacy=<PRIVACY>;privacy-manager-id=<PRIVACY_MANAGER_ID > ;qos-id=<QOS_ID>;ring-type-dn1=<RING_TYPE_DN1>;send-bdn-as-cpn=<SEND_BDN_AS_CPN>;send-bdn-for-emg=<SEND_BDN_FOREMG>;send-billing-dn=<SEND_BILLING_DN>;state=<STATE>;status=<STATUS>;sub-profile-id=<SUB_PROFILE_ID>;term-id=<TERM_ID>;terminating-immediate-rel=<TERMINATING_IMMEDIATE_REL>;term-type=<TERM_TYPE>;tgn-id=<TRUNK_GROUP_ID>;usage-sens=<USAGE_SENSITIVE_FEATURE>;voice-mail-id=<VOICE_MAIL_ID>;zipcode=<ZIPCODE>;
Output ParametersTRANSACTION_ID compound parameter
ASDL_COUNTER
STATE State designation. N/A N/A S O
SUB_STATUS Indicates the subscriber status. N/A N/A S O
SUB_PROFILE_ID Subscriber profile ID. N/A N/A S O
TERM_ID Termination ID. N/A N/A S O
TERMINATING_IMMEDIATE_REL
Terminating immediate release. N/A N/A S O
TERM_TYPE Termination type. N/A N/A S O
TRUNK_GROUP_ID Trunk group ID. N/A N/A S O
USAGE_SENSITIVE_FEATURE
Usage sensitive features. N/A N/A S O
VOICE_MAIL_ID voice mail ID. N/A N/A S O
ZIPCODE Subscriber's zip code. N/A N/A S O
TRANSACTION_ID Transaction ID returned by NE after MML command is processed.
N/A N/A C O
ASDL_COUNTER ASDL sequence number in CSDL. For internal processing use only.
N/A N/A S O
Table 2–31 (Cont.) A_CSCO-BTS10200_4-4_ADD_SUBSCRIBER
Parameter Name Description RangeDefault Value Type Class
ASDL Commands
2-28 Product Title/BookTitle as a Variable
A_CSCO-BTS10200_4-4_ADD_SUBSCRIBER-FEATURESAdd subscriber features. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsSub.addSubscriberFeatures.
MML commands
MML Syntax :
add subscriber-feature-data sub-id=<SUB_ID>;fname=<FEATURE_NAME>;active=<ACTIVE>;type1=<TYPE1 > ;value1=<VALUE1>;type2=<TYPE2 > ; value2=<VALUE2>;type3=<TYPE3 > ;value3=<VALUE3>;type4=<TYPE4 > ; value4=<VALUE4>;voice-mail-id=<VOICE-MAIL-ID>;
Output ParametersTRANSACTION_ID compound parameter
ASDL_COUNTER
Table 2–32 A_CSCO-BTS10200_4-4_ADD_SUBSCRIBER-FEATURES
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE identifier. N/A N/A S R
SUB_ID Subscriber ID. N/A N/A S R
FEATURE_NAME Feature name. N/A N/A C R
ACTIVE Specifies if the sub ID is activated. N/A N/A C O
TYPE1 Feature data type 1. N/A N/A C O
VALUE1 Value associated with data type defined in TYPE1.
N/A N/A C O
TYPE2 Feature data type 2. N/A N/A C O
VALUE2 Value associated with data type defined in TYPE2.
N/A N/A C O
TYPE3 Feature data type 3. N/A N/A C O
VALUE3 Value associated with data type defined in TYPE3.
N/A N/A C O
TYPE4 Feature data type 4. N/A N/A C O
VALUE4 Value associated with data type defined in TYPE4.
N/A N/A C O
VOICE_MAIL_ID Voice mail ID. N/A N/A S O
TRANSACTION_ID Transaction ID returned by NE after MML command is processed.
N/A N/A C O
ASDL_COUNTER ASDL sequence number in CSDL. For internal processing use only.
N/A N/A S O
ASDL Commands
Atomic Service Description Layer (ASDL) Commands 2-29
A_CSCO-BTS10200_4-4_ADD_SUBSCRIBER-FEATURES-ROLLBACKAdd subscriber features. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsSub.addSubscriberFeaturesRollback.
MML commands
MML Syntax :
add subscriber-feature-data sub-id=<OLD_SUB_ID>;fname=<OLD_FEATURE_NAME>;active=<OLD_ACTIVE>;type1=<OLD_TYPE1 > ;value1=<OLD_VALUE1>;type2=<OLD_TYPE2 > ; value2=<OLD_VALUE2>;type3=<OLD_TYPE3 > ;value3=<OLD_VALUE3>;type4=<OLD_TYPE4 > ; value4=<OLD_VALUE4>;voice-mail-id=<OLD_VOICE-MAIL-ID>;
Output ParametersTRANSACTION_ID compound parameter
ASDL_COUNTER
Table 2–33 A_CSCO-BTS10200_4-4_ADD_SUBSCRIBER-FEATURES-ROLLBACK
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE identifier. N/A N/A S R
OLD_SUB_ID Subscriber ID. N/A N/A S R
OLD_FEATURE_NAME
Feature name. N/A N/A C R
OLD_ACTIVE Specifies if the sub ID is activated. N/A N/A C O
OLD_TYPE1 Feature data type 1. N/A N/A C O
OLD_VALUE1 Value associated with data type defined in TYPE1.
N/A N/A C O
OLD_TYPE2 Feature data type 2. N/A N/A C O
OLD_VALUE2 Value associated with data type defined in TYPE2.
N/A N/A C O
OLD_TYPE3 Feature data type 3. N/A N/A C O
OLD_VALUE3 Value associated with data type defined in TYPE3.
N/A N/A C O
OLD_TYPE4 Feature data type 4. N/A N/A C O
OLD_VALUE4 Value associated with data type defined in TYPE4.
N/A N/A C O
OLD_VOICE_MAIL_ID
Voice mail ID. N/A N/A S O
TRANSACTION_ID Transaction ID returned by NE after MML command is processed.
N/A N/A C O
ASDL_COUNTER ASDL sequence number in CSDL. For internal processing use only.
N/A N/A S O
ASDL Commands
2-30 Product Title/BookTitle as a Variable
A_CSCO-BTS10200_4-4_ADD_SUBSCRIBER-PROFILEAdd a subscriber profile. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsSub.addSubscriberProfile.
MML commands
MML Syntax :
add subscriber-profile id=<SUB_PROFILE_ID>;dial-plan-id=<DIAL_PLAN_ID>;pop-id=<POP_ID>;cos-restrict-id=<COS_RESTRICT_ID>;digit-map-id=<DIGIT_MAP_ID>;ea-use-pic1=<EA_USE_PIC1>interlata-pfx1-opt=<INTERLATA_PFX1_OPT> ;local-pfx1-opt=<LOCAL_PFX1_OPT>;lsa=<LOCAL_SERVICE_AREA>;oli=<ORIG_LINE_INFO>;privacy-manager-id=<PRIVACY_MANAGER_ID>;policy-server-id=<POLICY_SERVER_ID>;qos-id=<QOS_ID>;region=<REGION>;service-id=<SERVICE_ID>;test-line-type=<TEST_LINE_TYPE> ;toll-pfx1-opt=<TOLL_PFX1_OPT>;
Table 2–34 A_CSCO-BTS10200_4-4_ADD_SUBSCRIBER-PROFILE
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE identifier. N/A N/A S R
SUB_PROFILE_ID Subscriber profile ID. N/A N/A S R
DIAL_PLAN_ID Dial plan profile ID. N/A N/A S R
POP_ID Point of presence (POP) ID. N/A N/A S R
COS_RESTRICT_ID Class of service restriction ID. N/A N/A S O
DIGIT_MAP_ID Digit Map ID. N/A N/A S O
EA_USE_PIC1 Route to PIC1. N/A N/A S O
INTERLATA_PFX1_OPT
InterLATA call. N/A N/A S O
LOCAL_PFX1_OPT Prefix options for a local call. N/A N/A S O
LOCAL_SERVICE_AREA
Local service area. N/A N/A S O
ORIG_LINE_INFO Originating line information. N/A N/A S O
PRIVACY_MANAGER_ID
Privacy manager ID. N/A N/A S O
POLICY_SERVER_ID Policy server ID. N/A N/A S O
QOS_ID QOS index. N/A N/A S O
REGION Subscriber profile region. N/A N/A S O
SERVICE_ID service ID. N/A N/A S O
TEST_LINE_TYPE Type of test line. N/A N/A S O
TOLL_PFX1_OPT Prefix options for a intraLATA toll. N/A N/A S O
TRANSACTION_ID Transaction ID returned by NE after MML command is processed.
N/A N/A C O
ASDL_COUNTER ASDL sequence number in CSDL. For internal processing use only.
N/A N/A S O
ASDL Commands
Atomic Service Description Layer (ASDL) Commands 2-31
Output ParametersTRANSACTION_ID compound parameter
ASDL_COUNTER
A_CSCO-BTS10200_4-4_ADD_SUBSCRIBER-PROFILE-ROLLBACKAdd a subscriber profile. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsSub.addSubscriberProfileRollback.
Table 2–35 A_CSCO-BTS10200_4-4_ADD_SUBSCRIBER-PROFILE-ROLLBACK
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE identifier. N/A N/A S R
OLD_SUB_PROFILE_ID
Subscriber profile ID. N/A N/A S R
OLD_DIAL_PLAN_ID Dial plan profile ID. N/A N/A S R
OLD_POP_ID Point of presence (POP) ID. N/A N/A S R
OLD_COS_RESTRICT_ID
Class of service restriction ID. N/A N/A S O
OLD_DIGIT_MAP_ID Digit Map ID. N/A N/A S O
OLD_EA_USE_PIC1 Route to PIC1. N/A N/A S O
OLD_INTERLATA_PFX1_OPT
InterLATA call. N/A N/A S O
OLD_LOCAL_PFX1_OPT
Prefix options for a local call. N/A N/A S O
OLD_LOCAL_SERVICE_AREA
Local service area. N/A N/A S O
OLD_ORIG_LINE_INFO
Originating line information. N/A N/A S O
OLD_PRIVACY_MANAGER_ID
Privacy manager ID. N/A N/A S O
OLD_POLICY_SERVER_ID
Policy server ID. N/A N/A S O
OLD_QOS_ID QOS index. N/A N/A S O
OLD_REGION Subscriber profile region. N/A N/A S O
OLD_SERVICE_ID service ID. N/A N/A S O
OLD_TEST_LINE_TYPE
Type of test line. N/A N/A S O
OLD_TOLL_PFX1_OPT
Prefix options for a intraLATA toll. N/A N/A S O
TRANSACTION_ID Transaction ID returned by NE after MML command is processed.
N/A N/A C O
ASDL_COUNTER ASDL sequence number in CSDL. For internal processing use only.
N/A N/A S O
ASDL Commands
2-32 Product Title/BookTitle as a Variable
MML commands
MML Syntax :
add subscriber-profile id=<OLD_SUB_PROFILE_ID>;dial-plan-id=<OLD_DIAL_PLAN_ID>;pop-id=<OLD_POP_ID>;cos-restrict-id=<OLD_COS_RESTRICT_ID>;digit-map-id=<OLD_DIGIT_MAP_ID>;ea-use-pic1=<OLD_EA_USE_PIC1>interlata-pfx1-opt=<OLD_INTERLATA_PFX1_OPT> ;local-pfx1-opt=<OLD_LOCAL_PFX1_OPT>;lsa=<OLD_LOCAL_SERVICE_AREA>;oli=<OLD_ORIG_LINE_INFO>;privacy-manager-id=<OLD_PRIVACY_MANAGER_ID>;policy-server-id=<OLD_POLICY_SERVER_ID>;qos-id=<OLD_QOS_ID>;region=<OLD_REGION>;service-id=<OLD_SERVICE_ID>;test-line-type=<OLD_TEST_LINE_TYPE> ;toll-pfx1-opt=<OLD_TOLL_PFX1_OPT>;
Output ParametersTRANSACTION_ID compound parameter
ASDL_COUNTER
A_CSCO-BTS10200_4-4_ADD_SUBSCRIBER-ROLLBACKAdd a subscriber. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsSub.addSubscriberRollback.
Table 2–36 A_CSCO-BTS10200_4-4_ADD_SUBSCRIBER-ROLLBACK
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE identifier. N/A N/A S R
OLD_ID Subscriber ID. N/A N/A S R
OLD_ADDRESS1 Address of the subscriber. N/A N/A S O
OLD_ADDRESS2 Address of the subscriber. N/A N/A S O
OLD_AOR_ID Address of the record ID. N/A N/A S O
OLD_BILLING_DN Billing DN. N/A N/A S O
OLD_BILLING_TYPE Subscriber billing type. N/A N/A S O
OLD_CATEGORY Subscriber category. N/A N/A S O
OLD_CITY City of subscriber. N/A N/A S O
OLD_COS_RESTRICT_ID
COS restriction ID. N/A N/A S O
OLD_COUNTRY Country of subscriber. N/A N/A S O
OLD_CTXG_ID ID in Centrex Group table. N/A N/A S O
OLD_DN1 Subscriber directory number (DN). N/A N/A S O
OLD_GROUP Group. N/A N/A S O
OLD_H323_TERM_ID The termination ID for an H323 terminal.
N/A N/A S O
OLD_IMMEDIATE_RELEASE
Immediate release procedure. N/A N/A S O
OLD_LANGUAGE Subscriber's preferred spoken language. N/A N/A S O
ASDL Commands
Atomic Service Description Layer (ASDL) Commands 2-33
OLD_MAC_ID MAC ID for the subscriber. N/A N/A S O
OLD_MGW_ID Media Gateway ID. N/A N/A S O
OLD_MLHG_ID Multiline Hunt Group ID. N/A N/A S O
OLD_MLHG_PREF_LIST_ID
MLGH preference list ID. N/A N/A S O
OLD_MWI_ON Message waiting indicator on status. N/A N/A S O
OLD_NAME Subscriber name. N/A N/A S O
OLD_PIC1 Preferred interLATA carrier (PIC). N/A N/A S O
OLD_PIC2 Preferred interLATA carrier (PIC) 2. N/A N/A S O
OLD_PIC3 Preferred interLATA carrier (PIC) 3. N/A N/A S O
OLD_POLICY_ID Policy ID. N/A N/A S O
OLD_PORTED_IN Permitted values are: Y/N. N/A N/A S O
OLD_PRIVACY Privacy. N/A N/A S O
OLD_PRIVACY_MANAGER_ID
Privacy manager ID. N/A N/A S O
OLD_QOS_ID QOS index. N/A N/A S O
OLD_RING_TYPE_DN1
Ring type for DN1. N/A N/A S O
OLD_SEND_BDN_AS_CPN
Send the billing DN of the subscriber as a CPN.
N/A N/A S O
OLD_SEND_BDN_FOREMG
Send the billing. N/A N/A S O
OLD_STATE State designation. N/A N/A S O
OLD_SUB_STATUS Indicates the subscriber status. N/A N/A S O
OLD_SUB_PROFILE_ID
Subscriber profile ID. N/A N/A S O
OLD_TERM_ID Termination ID. N/A N/A S O
OLD_TERMINATING_IMMEDIATE_REL
Terminating immediate release. N/A N/A S O
OLD_TERM_TYPE Termination type. N/A N/A S O
OLD_TRUNK_GROUP_ID
Trunk group ID. N/A N/A S O
OLD_USAGE_SENSITIVE_FEATURE
Usage sensitive features. N/A N/A S O
OLD_VOICE_MAIL_ID
voice mail ID. N/A N/A S O
OLD_ZIPCODE Subscriber's zip code. N/A N/A S O
TRANSACTION_ID Transaction ID returned by NE after MML command is processed.
N/A N/A C O
ASDL_COUNTER ASDL sequence number in CSDL. For internal processing use only.
N/A N/A S O
Table 2–36 (Cont.) A_CSCO-BTS10200_4-4_ADD_SUBSCRIBER-ROLLBACK
Parameter Name Description RangeDefault Value Type Class
ASDL Commands
2-34 Product Title/BookTitle as a Variable
MML commands
MML Syntax :
add subscriber id=<OLD_ID>;address1=<OLD_ADDRESS1>;address2=<OLD_ADDRESS2>;aor-id=<OLD_AOR_ID>;billing-dn=<OLD_BILLING_DN>;billing-type=<OLD_BILLING_TYPE>;category=<OLD_CATEGORY>;city=<OLD_CITY>;cos-restrict-id=<OLD_COS_RESTRICT_ID>;country=<OLD_COUNTRY>;ctxg-id=<OLD_CTXG_ID>;dn1=<OLD_DN1>;grp=<OLD_GROUP>;h323-term-id=<OLD_H323_TERM_ID>;immediate-release=<OLD_IMMEDIATE_RELEASE > ;language=<OLD_LANGUAGE > ;mac-id=<OLD_MAC_ID>;mgw-id=<OLD_MGW_ID>;mlhg-id=<OLD_MLHG_ID>;mlhg-pref-list-id=<OLD_MLHG_PREF_LIST_ID>;mwi-on=<OLD_MWI_ON>;name=<OLD_NAME>;pic1=<OLD_PIC1>;pic2=<OLD_PIC2>;pic3=<OLD_PIC3>;policy-id=<OLD_POLICY_ID > ;ported-in=<OLD_PORTED_IN>;privacy=<OLD_PRIVACY>;privacy-manager-id=<OLD_PRIVACY_MANAGER_ID > ;qos-id=<OLD_QOS_ID>;ring-type-dn1=<OLD_RING_TYPE_DN1>;send-bdn-as-cpn=<OLD_SEND_BDN_AS_CPN>;send-bdn-for-emg=<OLD_SEND_BDN_FOREMG>;send-billing-dn=<OLD_SEND_BILLING_DN>;state=<OLD_STATE>;status=<OLD_STATUS>;sub-profile-id=<OLD_SUB_PROFILE_ID>;term-id=<OLD_TERM_ID>;terminating-immediate-rel=<OLD_TERMINATING_IMMEDIATE_REL>;term-type=<OLD_TERM_TYPE>;tgn-id=<OLD_TRUNK_GROUP_ID>;usage-sens=<OLD_USAGE_SENSITIVE_FEATURE>;voice-mail-id=<OLD_VOICE_MAIL_ID>;zipcode=<OLD_ZIPCODE>;
Output ParametersTRANSACTION_ID compound parameter
ASDL_COUNTER
A_CSCO-BTS10200_4-4_ADD_SUBSCRIBER-SERVICE-PROFILEAdd a subscriber service profile. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsSub.addSubscriberServiceProfile.
MML commands
MML Syntax :
add subscriber-service-profile sub-id=<SUB_ID>;service-id=<SERVICE_ID> ;
Table 2–37 A_CSCO-BTS10200_4-4_ADD_SUBSCRIBER-SERVICE-PROFILE
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE identifier. N/A N/A S R
SUB_ID Subscriber ID. N/A N/A S R
SERVICE_ID Service ID. N/A N/A C R
TRANSACTION_ID Transaction ID returned by NE after MML command is processed.
N/A N/A C O
ASDL_COUNTER ASDL sequence number in CSDL. For internal processing use only.
N/A N/A S O
ASDL Commands
Atomic Service Description Layer (ASDL) Commands 2-35
Output ParametersTRANSACTION_ID compound parameter
ASDL_COUNTER
A_CSCO-BTS10200_4-4_ADD_SUBSCRIBER-SERVICE-PROFILE-ROLLBACKAdd a subscriber service profile. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsSub.addSubscriberServiceProfileRollback.
MML commands
MML Syntax :
add subscriber-service-profile sub-id=<OLD_SUB_ID>;service-id=<OLD_SERVICE_ID> ;
Output ParametersTRANSACTION_ID compound parameter
ASDL_COUNTER
A_CSCO-BTS10200_4-4_ADD_SUBSCRIBER-TIME-OF-DAYAdd a subscriber time of day. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsSub.addSubscriberTimeOfDay.
Table 2–38 A_CSCO-BTS10200_4-4_ADD_SUBSCRIBER-SERVICE-PROFILE-ROLLBACK
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE identifier. N/A N/A S R
OLD_SUB_ID Subscriber ID. N/A N/A S R
OLD_SERVICE_ID Service ID. N/A N/A C R
TRANSACTION_ID Transaction ID returned by NE after MML command is processed.
N/A N/A C O
ASDL_COUNTER ASDL sequence number in CSDL. For internal processing use only.
N/A N/A S O
Table 2–39 A_CSCO-BTS10200_4-4_ADD_SUBSCRIBER-TIME-OF-DAY
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE identifier. N/A N/A S R
SUB_ID Subscriber ID. N/A N/A S R
FEATURE_NAME Feature name. N/A N/A S R
ACTION Action of the subscriber. N/A N/A S O
DOY1 Month and day. N/A N/A S O
DOY2 Month and day. N/A N/A S O
DOY3 Month and day. N/A N/A S O
ASDL Commands
2-36 Product Title/BookTitle as a Variable
DOY4 Month and day. N/A N/A S O
DOY5 Month and day. N/A N/A S O
DOY6 Month and day. N/A N/A S O
DOY7 Month and day. N/A N/A S O
DOY8 Month and day. N/A N/A S O
DOY9 Month and day. N/A N/A S O
DOY10 Month and day. N/A N/A S O
START_DOW1 Day of week. N/A N/A S O
START_DOW2 Day of week. N/A N/A S O
START_DOW3 Day of week. N/A N/A S O
START_DOW4 Day of week. N/A N/A S O
START_DOW5 Day of week. N/A N/A S O
START_DOW6 Day of week. N/A N/A S O
START_DOW7 Day of week. N/A N/A S O
START_DOW8 Day of week. N/A N/A S O
START_DOW9 Day of week. N/A N/A S O
START_DOW10 Day of week. N/A N/A S O
STOP_DOW1 day of week that this policy ends. N/A N/A S O
STOP_DOW2 day of week that this policy ends. N/A N/A S O
STOP_DOW3 day of week that this policy ends. N/A N/A S O
STOP_DOW4 day of week that this policy ends. N/A N/A S O
STOP_DOW5 day of week that this policy ends. N/A N/A S O
STOP_DOW6 day of week that this policy ends. N/A N/A S O
STOP_DOW7 day of week that this policy ends. N/A N/A S O
STOP_DOW8 day of week that this policy ends. N/A N/A S O
STOP_DOW9 day of week that this policy ends. N/A N/A S O
STOP_DOW10 day of week that this policy ends. N/A N/A S O
START_TIME1 Start time N/A N/A S O
START_TIME2 Start time N/A N/A S O
START_TIME3 Start time N/A N/A S O
START_TIME4 Start time N/A N/A S O
START_TIME5 Start time N/A N/A S O
START_TIME6 Start time N/A N/A S O
START_TIME7 Start time N/A N/A S O
START_TIME8 Start time N/A N/A S O
START_TIME9 Start time N/A N/A S O
Table 2–39 (Cont.) A_CSCO-BTS10200_4-4_ADD_SUBSCRIBER-TIME-OF-DAY
Parameter Name Description RangeDefault Value Type Class
ASDL Commands
Atomic Service Description Layer (ASDL) Commands 2-37
MML commands
MML Syntax :
add subscriber-tod-schedule sub-id=<SUB_ID >;fname=<FEATURE_NAME>;action=<ACTION>;doy1=<DOY1>;doy2=<DOY2>;doy3=<DOY3>;doy4=<DOY4>;doy5=<DOY5>;doy6=<DOY6>;doy7=<DOY7>;doy8=<DOY8>;doy9< DOY9>;doy10=<DOY10>;start-dow1=<START_DOW1>;start-dow2=<START_DOW2>;start-dow3=<START_DOW3>;start-dow4=<START_DOW4>;start-dow5=<START_DOW5>;start-dow6=<START_DOW6>;start-dow7=<START_DOW7>;start-dow8=<START_DOW8>;start-dow9=<START_DOW9>;start-dow10=<START_DOW10>;stop-dow1=<STOP_DOW1>;stop-dow2=<STOP_DOW2> ;stop-dow3=<STOP_DOW3>;stop-dow4=<STOP_DOW4>;stop-dow5=<STOP_DOW5>;stop-dow6=<STOP_DOW6>;stop-dow7=<STOP_DOW7>;stop-dow8=<STOP_DOW8> ;stop-dow9=<STOP_DOW9>;stop-dow10=<STOP_DOW10>;start-time1=<START_TIME1> ;start-time2=<START_TIME2> ; start-time3=<START_TIME3> ;start-time4=<START_TIME4> ; start-time5=<START_TIME5> ;start-time6=<START_TIME6> ; start-time7=<START_TIME7> ;start-time8=<START_TIME8> ; start-time9=<START_TIME9> ;start-time1=<START_TIME10> ;stop-time1=<STOP_TIME1>;stop-time2=<STOP_TIME2>;stop-time3=<STOP_TIME3>;stop-time4=<STOP_TIME4>;stop-time5=<STOP_TIME5>;stop-time6=<STOP_TIME6>;stop-time7=<STOP_TIME7>;stop-time8=<STOP_TIME8>;stop-time9=<STOP_TIME9>;stop-time10=<STOP_TIME10>;
Output ParametersTRANSACTION_ID compound parameter
ASDL_COUNTER
START_TIME10 Start time N/A N/A S O
STOP_TIME1 Stop time N/A N/A S O
STOP_TIME2 Stop time N/A N/A S O
STOP_TIME3 Stop time N/A N/A S O
STOP_TIME4 Stop time N/A N/A S O
STOP_TIME5 Stop time N/A N/A S O
STOP_TIME6 Stop time N/A N/A S O
STOP_TIME7 Stop time N/A N/A S O
STOP_TIME8 Stop time N/A N/A S O
STOP_TIME9 Stop time N/A N/A S O
STOP_TIME10 Stop time N/A N/A S O
TRANSACTION_ID Transaction ID returned by NE after MML command is processed.
N/A N/A C O
ASDL_COUNTER ASDL sequence number in CSDL. For internal processing use only.
N/A N/A S O
Table 2–39 (Cont.) A_CSCO-BTS10200_4-4_ADD_SUBSCRIBER-TIME-OF-DAY
Parameter Name Description RangeDefault Value Type Class
ASDL Commands
2-38 Product Title/BookTitle as a Variable
A_CSCO-BTS10200_4-4_ADD_SUBSCRIBER-TIME-OF-DAY-ROLLBACKAdd a subscriber time of day. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsSub.addSubscriberTimeOfDayRollback.
Table 2–40 A_CSCO-BTS10200_4-4_ADD_SUBSCRIBER-TIME-OF-DAY-ROLLBACK
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE identifier. N/A N/A S R
OLD_SUB_ID Subscriber ID. N/A N/A S R
OLD_FEATURE_NAME
Feature name. N/A N/A S R
OLD_ACTION Action of the subscriber. N/A N/A S O
OLD_DOY1 Month and day. N/A N/A S O
OLD_DOY2 Month and day. N/A N/A S O
OLD_DOY3 Month and day. N/A N/A S O
OLD_DOY4 Month and day. N/A N/A S O
OLD_DOY5 Month and day. N/A N/A S O
OLD_DOY6 Month and day. N/A N/A S O
OLD_DOY7 Month and day. N/A N/A S O
OLD_DOY8 Month and day. N/A N/A S O
OLD_DOY9 Month and day. N/A N/A S O
OLD_DOY10 Month and day. N/A N/A S O
OLD_START_DOW1 Day of week. N/A N/A S O
OLD_START_DOW2 Day of week. N/A N/A S O
OLD_START_DOW3 Day of week. N/A N/A S O
OLD_START_DOW4 Day of week. N/A N/A S O
OLD_START_DOW5 Day of week. N/A N/A S O
OLD_START_DOW6 Day of week. N/A N/A S O
OLD_START_DOW7 Day of week. N/A N/A S O
OLD_START_DOW8 Day of week. N/A N/A S O
OLD_START_DOW9 Day of week. N/A N/A S O
OLD_START_DOW10 Day of week. N/A N/A S O
OLD_STOP_DOW1 day of week that this policy ends. N/A N/A S O
OLD_STOP_DOW2 day of week that this policy ends. N/A N/A S O
OLD_STOP_DOW3 day of week that this policy ends. N/A N/A S O
OLD_STOP_DOW4 day of week that this policy ends. N/A N/A S O
OLD_STOP_DOW5 day of week that this policy ends. N/A N/A S O
OLD_STOP_DOW6 day of week that this policy ends. N/A N/A S O
OLD_STOP_DOW7 day of week that this policy ends. N/A N/A S O
OLD_STOP_DOW8 day of week that this policy ends. N/A N/A S O
ASDL Commands
Atomic Service Description Layer (ASDL) Commands 2-39
MML commands
MML Syntax :
add subscriber-tod-schedule sub-id=<OLD_SUB_ID > ;fname=<OLD_FEATURE_NAME>;action=<OLD_ACTION>;doy1=<OLD_DOY1>;doy2=<OLD_DOY2>;doy3=<OLD_DOY3>;doy4=<OLD_DOY4>;doy5=<OLD_DOY5>;doy6=<OLD_DOY6>;doy7=<OLD_DOY7>;doy8=<OLD_DOY8>;doy9< DOY9>;doy10=<OLD_DOY10>;start-dow1=<OLD_START_DOW1>;start-dow2=<OLD_START_DOW2>;start-dow3=<OLD_START_DOW3>;start-dow4=<OLD_START_DOW4>;start-dow5=<OLD_START_DOW5>;start-dow6=<OLD_START_DOW6>;start-dow7=<OLD_START_DOW7>;start-dow8=<OLD_START_DOW8>;start-dow9=<OLD_START_DOW9>;start-dow10=<OLD_START_DOW10>;stop-dow1=<OLD_STOP_DOW1>;stop-dow2=<OLD_STOP_DOW2>
OLD_STOP_DOW9 day of week that this policy ends. N/A N/A S O
OLD_STOP_DOW10 day of week that this policy ends. N/A N/A S O
OLD_START_TIME1 Start time N/A N/A S O
OLD_START_TIME2 Start time N/A N/A S O
OLD_START_TIME3 Start time N/A N/A S O
OLD_START_TIME4 Start time N/A N/A S O
OLD_START_TIME5 Start time N/A N/A S O
OLD_START_TIME6 Start time N/A N/A S O
OLD_START_TIME7 Start time N/A N/A S O
OLD_START_TIME8 Start time N/A N/A S O
OLD_START_TIME9 Start time N/A N/A S O
OLD_START_TIME10 Start time N/A N/A S O
OLD_STOP_TIME1 Stop time N/A N/A S O
OLD_STOP_TIME2 Stop time N/A N/A S O
OLD_STOP_TIME3 Stop time N/A N/A S O
OLD_STOP_TIME4 Stop time N/A N/A S O
OLD_STOP_TIME5 Stop time N/A N/A S O
OLD_STOP_TIME6 Stop time N/A N/A S O
OLD_STOP_TIME7 Stop time N/A N/A S O
OLD_STOP_TIME8 Stop time N/A N/A S O
OLD_STOP_TIME9 Stop time N/A N/A S O
OLD_STOP_TIME10 Stop time N/A N/A S O
TRANSACTION_ID Transaction ID returned by NE after MML command is processed.
N/A N/A C O
ASDL_COUNTER ASDL sequence number in CSDL. For internal processing use only.
N/A N/A S O
Table 2–40 (Cont.) A_CSCO-BTS10200_4-4_ADD_SUBSCRIBER-TIME-OF-DAY-ROLLBACK
Parameter Name Description RangeDefault Value Type Class
ASDL Commands
2-40 Product Title/BookTitle as a Variable
;stop-dow3=<OLD_STOP_DOW3>;stop-dow4=<OLD_STOP_DOW4>;stop-dow5=<OLD_STOP_DOW5>;stop-dow6=<OLD_STOP_DOW6>;stop-dow7=<OLD_STOP_DOW7>;stop-dow8=<OLD_STOP_DOW8> ;stop-dow9=<OLD_STOP_DOW9>;stop-dow10=<OLD_STOP_DOW10>;start-time1=<OLD_START_TIME1> ;start-time2=<OLD_START_TIME2> ; start-time3=<OLD_START_TIME3> ;start-time4=<OLD_START_TIME4> ; start-time5=<OLD_START_TIME5> ;start-time6=<OLD_START_TIME6> ; start-time7=<OLD_START_TIME7> ;start-time8=<OLD_START_TIME8> ; start-time9=<OLD_START_TIME9> ;start-time1=<OLD_START_TIME10> ;stop-time1=<OLD_STOP_TIME1>;stop-time2=<OLD_STOP_TIME2>;stop-time3=<OLD_STOP_TIME3>;stop-time4=<OLD_STOP_TIME4>;stop-time5=<OLD_STOP_TIME5>;stop-time6=<OLD_STOP_TIME6>;stop-time7=<OLD_STOP_TIME7>;stop-time8=<OLD_STOP_TIME8>;stop-time9=<OLD_STOP_TIME9>;stop-time10=<OLD_STOP_TIME10>;
Output ParametersTRANSACTION_ID compound parameter
ASDL_COUNTER
A_CSCO-BTS10200_4-4_ADD_TERMINATIONAdd a termination. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsMgw.addTermination.
MML commands
MML Syntax :
add termination prefix=<PREFIX>; port-start=<PORT_START>; port-end=<PORT_END>;mgw-id=<MGW_ID>; type=<TYPE>; oper-status=<OPER_STATUS>; tg=<TG>
Table 2–41 A_CSCO-BTS10200_4-4_ADD_TERMINATION
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE Identifier N/A N/A S R
MGW_ID ID of the media gateway(1-32 ASCII characters).
N/A N/A S R
PREFIX N/A N/A S R
PORT_START User assigned token id N/A N/A S R
PORT_END Port number start N/A N/A S R
TERM_TYPE Port number end N/A N/A S R
TERM_OPER_STATUS Termination type. N/A N/A S O
TG Trunk group ID. N/A N/A S O
ASDL_COUNTER ASDL sequence counter in CSDL. For internal processing use only.
N/A N/A S O
TRANSACTION_ID Transaction ID returned by NE after processing MML command.
N/A N/A C O
ASDL Commands
Atomic Service Description Layer (ASDL) Commands 2-41
Output ParametersTRANSACTION_ID compound parameter
ASDL_COUNTER
A_CSCO-BTS10200_4-4_ADD_TERMINATION-ROLLBACKAdd a termination. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsMgw.addTerminationRollback.
MML commands
MML Syntax :
add termination prefix=<PREFIX>; port-start=<PORT_START>; port-end=<PORT_END>;mgw-id=<OLD_MGW_ID>; type=<OLD_TYPE>; oper-status=<OLD_OPER_STATUS>; tg=<OLD_TG>
Output ParametersTRANSACTION_ID compound parameter
ASDL_COUNTER
A_CSCO-BTS10200_4-4_ADD_TWO-DIGIT-SPEED-CALLAdd a speed call two digit. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsSub.addTwoDigitSpeedCall.
Table 2–42 A_CSCO-BTS10200_4-4_ADD_TERMINATION-ROLLBACK
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE Identifier N/A N/A S R
OLD_MGW_ID ID of the media gateway(1-32 ASCII characters).
N/A N/A S R
PREFIX N/A N/A S R
PORT_START User assigned token id N/A N/A S R
PORT_END Port number start N/A N/A S R
OLD_TERM_TYPE Port number end N/A N/A S R
OLD_TERM_OPER_STATUS
Termination type. N/A N/A S O
OLD_TG Trunk group ID. N/A N/A S O
ASDL_COUNTER ASDL sequence counter in CSDL. For internal processing use only.
N/A N/A S O
TRANSACTION_ID Transaction ID returned by NE after processing MML command.
N/A N/A C O
ASDL Commands
2-42 Product Title/BookTitle as a Variable
Table 2–43 A_CSCO-BTS10200_4-4_ADD_TWO-DIGIT-SPEED-CALL
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE identifier. N/A N/A S R
SUB_ID Subscriber ID. N/A N/A S R
DN20 Directory number. N/A N/A S O
DN21 Directory number. N/A N/A S O
DN22 Directory number. N/A N/A S O
DN23 Directory number. N/A N/A S O
DN24 Directory number. N/A N/A S O
DN25 Directory number. N/A N/A S O
DN26 Directory number. N/A N/A S O
DN27 Directory number. N/A N/A S O
DN28 Directory number. N/A N/A S O
DN29 Directory number. N/A N/A S O
DN30 Directory number. N/A N/A S O
DN31 Directory number. N/A N/A S O
DN32 Directory number. N/A N/A S O
DN33 Directory number. N/A N/A S O
DN34 Directory number. N/A N/A S O
DN35 Directory number. N/A N/A S O
DN36 Directory number. N/A N/A S O
DN37 Directory number. N/A N/A S O
DN38 Directory number. N/A N/A S O
DN39 Directory number. N/A N/A S O
DN40 Directory number. N/A N/A S O
DN41 Directory number. N/A N/A S O
DN42 Directory number. N/A N/A S O
DN43 Directory number. N/A N/A S O
DN44 Directory number. N/A N/A S O
DN45 Directory number. N/A N/A S O
DN46 Directory number. N/A N/A S O
DN47 Directory number. N/A N/A S O
DN48 Directory number. N/A N/A S O
DN49 Directory number. N/A N/A S O
TRANSACTION_ID Transaction ID returned by NE after MML command is processed.
N/A N/A C O
ASDL_COUNTER ASDL sequence number in CSDL. For internal processing use only.
N/A N/A S O
ASDL Commands
Atomic Service Description Layer (ASDL) Commands 2-43
MML commands
MML Syntax :
add sc2d sub-id=<SUB_ID>;dn20=<DN20>;dn21=<DN21>;dn22=<DN22>;dn23=<DN23>;dn24=<DN24>;dn25=<DN25>;dn26=<DN26>;dn27=<DN27>;dn28=<DN28>;dn29=<DN29>;dn30=<DN30>;dn31=<DN31>;dn32=<DN32>;dn33=<DN33>;dn34=<DN34>;dn35=<DN35>;dn36=<DN36>;dn37=<DN37>;dn38=<DN38>;dn39=<DN39>;dn40=<DN40>;dn41=<DN41>;dn42=<DN42>;dn43=<DN43>;dn44=<DN44>;dn45=<DN45>;dn46=<DN46>;dn47=<DN47>;dn48=<DN48>;dn49=<DN49>;
Output ParametersTRANSACTION_ID compound parameter
ASDL_COUNTER
A_CSCO-BTS10200_4-4_ADD_TWO-DIGIT-SPEED-CALL-ROLLBACKAdd a speed call two digit. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsSub.addTwoDigitSpeedCallRollback.
Table 2–44 A_CSCO-BTS10200_4-4_ADD_TWO-DIGIT-SPEED-CALL-ROLLBACK
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE identifier. N/A N/A S R
OLD_SUB_ID Subscriber ID. N/A N/A S R
OLD_DN20 Directory number. N/A N/A S O
OLD_DN21 Directory number. N/A N/A S O
OLD_DN22 Directory number. N/A N/A S O
OLD_DN23 Directory number. N/A N/A S O
OLD_DN24 Directory number. N/A N/A S O
OLD_DN25 Directory number. N/A N/A S O
OLD_DN26 Directory number. N/A N/A S O
OLD_DN27 Directory number. N/A N/A S O
OLD_DN28 Directory number. N/A N/A S O
OLD_DN29 Directory number. N/A N/A S O
OLD_DN30 Directory number. N/A N/A S O
OLD_DN31 Directory number. N/A N/A S O
OLD_DN32 Directory number. N/A N/A S O
OLD_DN33 Directory number. N/A N/A S O
OLD_DN34 Directory number. N/A N/A S O
OLD_DN35 Directory number. N/A N/A S O
OLD_DN36 Directory number. N/A N/A S O
OLD_DN37 Directory number. N/A N/A S O
OLD_DN38 Directory number. N/A N/A S O
ASDL Commands
2-44 Product Title/BookTitle as a Variable
MML commands
MML Syntax :
add sc2d sub-id=<OLD_SUB_ID>;dn20=<OLD_DN20>;dn21=<OLD_DN21>;dn22=<OLD_DN22>;dn23=<OLD_DN23>;dn24=<OLD_DN24>;dn25=<OLD_DN25>;dn26=<OLD_DN26>;dn27=<OLD_DN27>;dn28=<OLD_DN28>;dn29=<OLD_DN29>;dn30=<OLD_DN30>;dn31=<OLD_DN31>;dn32=<OLD_DN32>;dn33=<OLD_DN33>;dn34=<OLD_DN34>;dn35=<OLD_DN35>;dn36=<OLD_DN36>;dn37=<OLD_DN37>;dn38=<OLD_DN38>;dn39=<OLD_DN39>;dn40=<OLD_DN40>;dn41=<OLD_DN41>;dn42=<OLD_DN42>;dn43=<OLD_DN43>;dn44=<OLD_DN44>;dn45=<OLD_DN45>;dn46=<OLD_DN46>;dn47=<OLD_DN47>;dn48=<OLD_DN48>;dn49=<OLD_DN49>;
Output ParametersTRANSACTION_ID compound parameter
ASDL_COUNTER
A_CSCO-BTS10200_4-4_ADD_USER-AUTHENTICATIONAdd a user authentication . It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsSip.addUserAuthentication.
OLD_DN39 Directory number. N/A N/A S O
OLD_DN40 Directory number. N/A N/A S O
OLD_DN41 Directory number. N/A N/A S O
OLD_DN42 Directory number. N/A N/A S O
OLD_DN43 Directory number. N/A N/A S O
OLD_DN44 Directory number. N/A N/A S O
OLD_DN45 Directory number. N/A N/A S O
OLD_DN46 Directory number. N/A N/A S O
OLD_DN47 Directory number. N/A N/A S O
OLD_DN48 Directory number. N/A N/A S O
OLD_DN49 Directory number. N/A N/A S O
TRANSACTION_ID Transaction ID returned by NE after MML command is processed.
N/A N/A C O
ASDL_COUNTER ASDL sequence number in CSDL. For internal processing use only.
N/A N/A S O
Table 2–44 (Cont.) A_CSCO-BTS10200_4-4_ADD_TWO-DIGIT-SPEED-CALL-ROLLBACK
Parameter Name Description RangeDefault Value Type Class
ASDL Commands
Atomic Service Description Layer (ASDL) Commands 2-45
MML commands
MML Syntax :
add user-auth auth-user=<AUTH_USER>;auth-realm-id=<AUTH_REALM_ID>;password=<PASSWORD>;aor-id=<AOR_ID>;
Output ParametersTRANSACTION_ID compound parameter
ASDL_COUNTER
A_CSCO-BTS10200_4-4_ADD_USER-AUTHENTICATION-ROLLBACKAdd a user authentication . It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsSip.addUserAuthenticationRollback.
MML commands
Table 2–45 A_CSCO-BTS10200_4-4_ADD_USER-AUTHENTICATION
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE Identifier N/A N/A S R
AUTH_USER authentication user name. N/A N/A S R
AUTH_REALM_ID authentication realm id N/A N/A S O
USER_AUTH_PASSWORD
password for this auth-user. N/A N/A S O
AOR_ID Address of record id N/A N/A S O
ASDL_COUNTER ASDL sequence counter in CSDL. For internal processing use only.
N/A N/A S O
TRANSACTION_ID Transaction ID returned by NE after processing MML command.
N/A N/A C O
Table 2–46 A_CSCO-BTS10200_4-4_ADD_USER-AUTHENTICATION-ROLLBACK
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE Identifier N/A N/A S R
OLD_AUTH_USER authentication user name. N/A N/A S R
OLD_AUTH_REALM_ID
authentication realm id N/A N/A S O
OLD_USER_AUTH_PASSWORD
password for this auth-user. N/A N/A S O
OLD_AOR_ID Address of record id N/A N/A S O
ASDL_COUNTER ASDL sequence counter in CSDL. For internal processing use only.
N/A N/A S O
TRANSACTION_ID Transaction ID returned by NE after processing MML command.
N/A N/A C O
ASDL Commands
2-46 Product Title/BookTitle as a Variable
MML Syntax :
add user-auth auth-user=<OLD_AUTH_USER>;auth-realm-id=<OLD_AUTH_REALM_ID>;password=<OLD_PASSWORD>;aor-id=<OLD_AOR_ID>;
Output ParametersTRANSACTION_ID compound parameter
ASDL_COUNTER
A_CSCO-BTS10200_4-4_CHANGE_AOR-TO-SUBSCRIBERChange address of record to subscriber. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsAdmin.modAorToSubscriber.
MML commands
MML Syntax :
change aor2sub aor-id=<AOR_ID>;status=<STATUS>;sub-id=<SUB_ID>;
Output ParametersTRANSACTION_ID compound parameter
ASDL_COUNTER
A_CSCO-BTS10200_4-4_CONTROL_MGWControl MGW. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsAdmin.controlMgw.
MML commands
Table 2–47 A_CSCO-BTS10200_4-4_CHANGE_AOR-TO-SUBSCRIBER
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE Identifier N/A N/A S R
AOR_ID Address of record id of the subscriber. N/A N/A S R
AOR2SUB_STATUS Status of the address of record. N/A N/A S R
SUB_ID Subscriber id. N/A N/A S R
Table 2–48 A_CSCO-BTS10200_4-4_CONTROL_MGW
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE Identifier N/A N/A S R
MGW_ID MGW Identifier. N/A N/A S R
MGW_MODE "Mode applied N/A N/A S R
MGW_TARGET_STATE
Target administrative state. N/A N/A S R
ASDL Commands
Atomic Service Description Layer (ASDL) Commands 2-47
MML Syntax :
control mgw id=<MGW_ID>; mode=<MODE>; target-state=<TARGET_STATE>;
Output ParametersNone.
A_CSCO-BTS10200_4-4_CONTROL_MGW-ROLLBACKControl MGW rollback. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsAdmin.controlMgwRollback.
MML commands
MML Syntax :
control mgw id=<OLD_MGW_ID>; mode=<OLD_MODE>; target-state=<OLD_TARGET_STATE>;
Output ParametersNone.
A_CSCO-BTS10200_4-4_CONTROL_SUBSCRIBER-TERMINATIONControl subscriber-termination. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsAdmin.controlSubscriberTermination.
MML commands
MML Syntax :
Table 2–49 A_CSCO-BTS10200_4-4_CONTROL_MGW-ROLLBACK
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE Identifier N/A N/A S R
MGW_ID MGW Identifier. N/A N/A S R
MGW_MODE "Mode applied N/A N/A S R
OLD_MGW_STATUS Target administrative state. N/A N/A S R
Table 2–50 A_CSCO-BTS10200_4-4_CONTROL_SUBSCRIBER-TERMINATION
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE Identifier N/A N/A S R
SUBSCRIBER_TERMINATION_ID
Subscriber termination Id on a particular gateway.
N/A N/A S R
SUB_TERM_MODE "Mode applied N/A N/A S R
SUB_TERM_TARGET_STATE
Target administrative state. N/A N/A S R
ASDL Commands
2-48 Product Title/BookTitle as a Variable
control subscriber-termination id=<SUBSCRIBER_ID>; mode=<MODE>; targetstate=<TARGET_STATE>;
Output ParametersNone.
A_CSCO-BTS10200_4-4_CONTROL_SUBSCRIBER-TERMINATION-ROLLBACKControl subscriber-termination rollback. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsAdmin.controlSubscriberTerminationRollback.
MML commands
MML Syntax :
control subscriber-termination id=<OLD_SUBSCRIBER_ID>; mode=<OLD_MODE>; targetstate=<OLD_TARGET_STATE>;
Output ParametersNone.
A_CSCO-BTS10200_4-4_DEL_AOR-TO-SUBSCRIBERDelete address of record to subscriber. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsSip.delAorToSubscriber.
Table 2–51 A_CSCO-BTS10200_4-4_CONTROL_SUBSCRIBER-TERMINATION-ROLLBACK
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE Identifier N/A N/A S R
SUBSCRIBER_TERMINATION_ID
Subscriber termination Id on a particular gateway.
N/A N/A S R
SUB_TERM_MODE "Mode applied N/A N/A S R
OLD_SUB_TERM_STATUS
Target administrative state. N/A N/A S R
Table 2–52 A_CSCO-BTS10200_4-4_DEL_AOR-TO-SUBSCRIBER
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE Identifier N/A N/A S R
AOR_ID Address of record id for the subscriber. N/A N/A C R
SUB_ID Subscriber ID N/A N/A S R
ASDL_COUNTER ASDL sequence counter in CSDL. For internal processing use only.
N/A N/A S O
TRANSACTION_ID Transaction ID returned by NE after processing MML command.
N/A N/A C O
ASDL Commands
Atomic Service Description Layer (ASDL) Commands 2-49
MML commands
MML Syntax :
delete aor2sub aor-id==<AOR_ID>;
Output ParametersTRANSACTION_ID compound parameter
ASDL_COUNTER
A_CSCO-BTS10200_4-4_DEL_AUTHORIZATION-CODEDelete an authorization code. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsSub.delAuthorizationCode.
MML commands
MML Syntax :
delete auth-code id=<AUTH_ID>;auth-code-grp-id=<AUTH_CODE_GROUP_ID>;
Output ParametersTRANSACTION_ID compound parameter
ASDL_COUNTER
A_CSCO-BTS10200_4-4_DEL_AUTHORIZATION-CODE-GROUPDelete an authorization code group. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsSub.delAuthorizationCodeGroup.
Table 2–53 A_CSCO-BTS10200_4-4_DEL_AUTHORIZATION-CODE
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE identifier. N/A N/A S R
AUTH_ID Dialed authorization code. N/A N/A S R
AUTH_CODE_GROUP_ID
Authorization code group ID. N/A N/A S R
TRANSACTION_ID Transaction ID returned by NE after MML command is processed.
N/A N/A C O
ASDL_COUNTER ASDL sequence number in CSDL. For internal processing use only.
N/A N/A S O
ASDL Commands
2-50 Product Title/BookTitle as a Variable
MML commands
MML Syntax :
delete auth-code-grp id=<AUTH_CODE_GROUP_ID>;
Output ParametersTRANSACTION_ID compound parameter
ASDL_COUNTER
A_CSCO-BTS10200_4-4_DEL_CASUAL-WB-LISTDelete a casual white black list. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsSub.delCasualWbList.
MML commands
MML Syntax :
delete casual-wb-list cos-restrict-id=<COS_RESTRICT_ID>;carrier =<CARRIER>;
Output ParametersTRANSACTION_ID compound parameter
ASDL_COUNTER
Table 2–54 A_CSCO-BTS10200_4-4_DEL_AUTHORIZATION-CODE-GROUP
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE identifier. N/A N/A S R
AUTH_CODE_GROUP_ID
Authorization code group ID. N/A N/A S R
TRANSACTION_ID Transaction ID returned by NE after MML command is processed.
N/A N/A C O
ASDL_COUNTER ASDL sequence number in CSDL. For internal processing use only.
N/A N/A S O
Table 2–55 A_CSCO-BTS10200_4-4_DEL_CASUAL-WB-LIST
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE identifier. N/A N/A S R
COS_RESTRICT_ID Class of service restriction ID. N/A N/A S R
ASDL_COUNTER ASDL sequence number in CSDL. For internal processing use only.
N/A N/A S O
CARRIER Carrier Identification Code (CIC). N/A N/A S R
TRANSACTION_ID Transaction ID returned by NE after MML command is processed.
N/A N/A C O
ASDL Commands
Atomic Service Description Layer (ASDL) Commands 2-51
A_CSCO-BTS10200_4-4_DEL_CHANGED-NUMBERDelete a changed number. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsSub.delChangednumber.
MML commands
MML Syntax :
delete changed-number old-dn=<OLD_DN>;
Output ParametersTRANSACTION_ID compound parameter
ASDL_COUNTER
A_CSCO-BTS10200_4-4_DEL_DN-TO-SUBSCRIBERDelete a DN2Subscriber. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsSub.delDnToSubscriber.
MML commands
MML Syntax :
delete dn2subscriber office-code-index=<OFFICE_CODE_INDEX > ;dn=<DN>;
Table 2–56 A_CSCO-BTS10200_4-4_DEL_CHANGED-NUMBER
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE identifier. N/A N/A S R
OLD_DN The old subscriber directory number. N/A N/A S R
TRANSACTION_ID Transaction ID returned by NE after MML command is processed.
N/A N/A C O
ASDL_COUNTER ASDL sequence number in CSDL. For internal processing use only.
N/A N/A S O
Table 2–57 A_CSCO-BTS10200_4-4_DEL_DN-TO-SUBSCRIBER
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE identifier. N/A N/A S R
OFFICE_CODE_INDEX
Office code index. N/A N/A S R
DN Directory number assigned to a subscriber.
N/A N/A S R
TRANSACTION_ID Transaction ID returned by NE after MML command is processed.
N/A N/A C O
ASDL_COUNTER ASDL sequence number in CSDL. For internal processing use only.
N/A N/A S O
ASDL Commands
2-52 Product Title/BookTitle as a Variable
Output ParametersTRANSACTION_ID compound parameter
ASDL_COUNTER
A_CSCO-BTS10200_4-4_DEL_INTERNATIONAL-WB-LISTDelete an International white black list. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsSub.delInternationalWbList.
MML commands
MML Syntax :
delete intl-wb-list cos-restrict-id=<COS_RESTRICT_ID>;ccnn=<COUNTRY_CODE_NATIONAL_NUMBER>;
Output ParametersTRANSACTION_ID compound parameter
ASDL_COUNTER
A_CSCO-BTS10200_4-4_DEL_MAC-TO-SUBSCRIBERDelete a MAC address to subscriber. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsSip.delMacToSubscriber.
Table 2–58 A_CSCO-BTS10200_4-4_DEL_INTERNATIONAL-WB-LIST
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE identifier. N/A N/A S R
COS_RESTRICT_ID Class of service restriction ID. N/A N/A S R
COUNTRY_CODE_NATIONAL_NUMBER
Country code (CC) and national number (NN).
N/A N/A S R
TRANSACTION_ID Transaction ID returned by NE after MML command is processed.
N/A N/A C O
ASDL_COUNTER ASDL sequence number in CSDL. For internal processing use only.
N/A N/A S O
Table 2–59 A_CSCO-BTS10200_4-4_DEL_MAC-TO-SUBSCRIBER
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE Identifier N/A N/A S R
MAC_ID Mac Address N/A N/A C R
SUB_ID Subscriber ID. N/A N/A S O
ASDL_COUNTER ASDL sequence counter in CSDL. For internal processing use only.
N/A N/A S O
TRANSACTION_ID Transaction ID returned by NE after processing MML command.
N/A N/A C O
ASDL Commands
Atomic Service Description Layer (ASDL) Commands 2-53
MML commands
MML Syntax :
delete mac2sub mac-id=<MAC_ID>;
Output ParametersTRANSACTION_ID compound parameter
ASDL_COUNTER
A_CSCO-BTS10200_4-4_DEL_MGPDelete a media gateway provisioning. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsMgp.delMgp.
MML commands
MML Syntax :
delete mgp ip-addr=<IP_ADDR>;
Output ParametersTRANSACTION_ID compound parameter
ASDL_COUNTER
A_CSCO-BTS10200_4-4_DEL_MGWDelete a media gateway. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsMgw.delMgw.
Table 2–60 A_CSCO-BTS10200_4-4_DEL_MGP
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE identifier. N/A N/A S R
IP_ADDR IP address of the device. N/A N/A S R
ASDL_COUNTER ASDL sequence counter in CSDL. For internal processing use only.
N/A N/A S O
TRANSACTION_ID Transaction ID returned by NE after processing MML command.
N/A N/A C O
Table 2–61 A_CSCO-BTS10200_4-4_DEL_MGW
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE Identifier N/A N/A S R
ASDL Commands
2-54 Product Title/BookTitle as a Variable
MML commands
MML Syntax :
delete mgw id=<MGW_ID>;
Output ParametersTRANSACTION_ID compound parameter
ASDL_COUNTER
A_CSCO-BTS10200_4-4_DEL_NATIONAL-WB-LISTDelete a national white black list. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsSub.delNationalWbList.
MML commands
MML Syntax :
delete nanp-wb-list cos-restrict-id=<COS_RESTRICT_ID>;digitstring=<DIGIT_STRING>;
Output ParametersTRANSACTION_ID compound parameter
ASDL_COUNTER
MGW_ID The media gateway identifier (1-32 ASCII characters).
N/A N/A S R
ASDL_COUNTER ASDL sequence counter in CSDL. For internal processing use only.
N/A N/A S O
TRANSACTION_ID Transaction ID returned by NE after processing MML command.
N/A N/A C O
Table 2–62 A_CSCO-BTS10200_4-4_DEL_NATIONAL-WB-LIST
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE identifier. N/A N/A S R
COS_RESTRICT_ID Class of service restriction ID. N/A N/A S R
DIGIT_STRING Digit string using dashes. N/A N/A S R
TRANSACTION_ID Transaction ID returned by NE after MML command is processed.
N/A N/A C O
ASDL_COUNTER ASDL sequence number in CSDL. For internal processing use only.
N/A N/A S O
Table 2–61 (Cont.) A_CSCO-BTS10200_4-4_DEL_MGW
Parameter Name Description RangeDefault Value Type Class
ASDL Commands
Atomic Service Description Layer (ASDL) Commands 2-55
A_CSCO-BTS10200_4-4_DEL_NATURE-OF-DIAL-WB-LISTDelete a nature of dial white black list. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsSub.delNatureOfDialWbList.
MML commands
MML Syntax :
delete nod-wb-list cos-restrict-id=<COS_RESTRICT_ID>;nod=<NATURE_OF_DIAL>;
Output ParametersTRANSACTION_ID compound parameter
ASDL_COUNTER
A_CSCO-BTS10200_4-4_DEL_ONE-DIGIT-SPEED-CALLDelete a speed call one digit. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsSub.delOneDigitSpeedCall.
Table 2–63 A_CSCO-BTS10200_4-4_DEL_NATURE-OF-DIAL-WB-LIST
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE identifier. N/A N/A S R
COS_RESTRICT_ID Class of service restriction ID. N/A N/A S R
NATURE_OF_DIAL Nature of dial. N/A N/A S R
TRANSACTION_ID Transaction ID returned by NE after MML command is processed.
N/A N/A C O
ASDL_COUNTER ASDL sequence number in CSDL. For internal processing use only.
N/A N/A S O
Table 2–64 A_CSCO-BTS10200_4-4_DEL_ONE-DIGIT-SPEED-CALL
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE identifier. N/A N/A S R
SUB_ID Subscriber ID. N/A N/A S R
DN2 Directory number. N/A N/A S O
DN3 Directory number. N/A N/A S O
DN4 Directory number. N/A N/A S O
DN5 Directory number. N/A N/A S O
DN6 Directory number. N/A N/A S O
DN7 Directory number. N/A N/A S O
DN8 Directory number. N/A N/A S O
ASDL Commands
2-56 Product Title/BookTitle as a Variable
MML commands
MML Syntax :
delete sc1d sub-id=<SUB_ID>;dn2=<DN2>;dn3=<DN3>;dn4=<DN4>;dn5=<DN5>;dn6=<DN6>;dn7=<DN7>;dn8=<DN8>;dn9=<DN9>;
Output ParametersTRANSACTION_ID compound parameter
ASDL_COUNTER
A_CSCO-BTS10200_4-4_DEL_SCREEN-LISTDelete a screening list editing. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsSub.delScreenList.
MML commands
MML Syntax :
delete sle sub-id=<SUB_ID>;fname=<FEATURE_NAME>;dn=<DN>;
DN9 Directory number. N/A N/A S O
TRANSACTION_ID Transaction ID returned by NE after MML command is processed.
N/A N/A C O
ASDL_COUNTER ASDL sequence number in CSDL. For internal processing use only.
N/A N/A S O
Table 2–65 A_CSCO-BTS10200_4-4_DEL_SCREEN-LIST
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE identifier. N/A N/A S R
SUB_ID Subscriber ID from the subscriber. N/A N/A S R
FEATURE_NAME Type of screening feature. N/A N/A C R
DN Directory number entry. N/A N/A C R
ANONYMOUS Anonymous entry. Permitted values are: Y/N.
N/A N/A C O
TIMESTAMP The date and time the entry was added. Integer values permitted from 1 to 9999.
N/A N/A C O
TRANSACTION_ID Transaction ID returned by NE after MML command is processed.
N/A N/A C O
ASDL_COUNTER ASDL sequence number in CSDL. For internal processing use only.
N/A N/A S O
Table 2–64 (Cont.) A_CSCO-BTS10200_4-4_DEL_ONE-DIGIT-SPEED-CALL
Parameter Name Description RangeDefault Value Type Class
ASDL Commands
Atomic Service Description Layer (ASDL) Commands 2-57
Output ParametersTRANSACTION_ID compound parameter
ASDL_COUNTER
A_CSCO-BTS10200_4-4_DEL_SUBSCRIBERDelete a subscriber. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsSub.delSubscriber.
MML commands
MML Syntax :
delete subscriber id=<ID>;
Output ParametersTRANSACTION_ID compound parameter
ASDL_COUNTER
A_CSCO-BTS10200_4-4_DEL_SUBSCRIBER-FEATURESDelete subscriber features. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsSub.delSubscriberFeatures.
MML commands
Table 2–66 A_CSCO-BTS10200_4-4_DEL_SUBSCRIBER
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE identifier. N/A N/A S R
ID Subscriber ID. N/A N/A S R
TRANSACTION_ID Transaction ID returned by NE after MML command is processed.
N/A N/A C O
ASDL_COUNTER ASDL sequence number in CSDL. For internal processing use only.
N/A N/A S O
Table 2–67 A_CSCO-BTS10200_4-4_DEL_SUBSCRIBER-FEATURES
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE identifier. N/A N/A S R
SUB_ID Subscriber ID. N/A N/A S R
FEATURE_NAME Feature name. N/A N/A C R
TRANSACTION_ID Transaction ID returned by NE after MML command is processed.
N/A N/A C O
ASDL_COUNTER ASDL sequence number in CSDL. For internal processing use only.
N/A N/A S O
ASDL Commands
2-58 Product Title/BookTitle as a Variable
MML Syntax :
delete subscriber-feature-data sub-id=<SUB_ID>;fname=<FEATURE_NAME>;
Output ParametersTRANSACTION_ID compound parameter
ASDL_COUNTER
A_CSCO-BTS10200_4-4_DEL_SUBSCRIBER-PROFILEDelete a subscriber profile. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsSub.delSubscriberProfile.
MML commands
MML Syntax :
delete subscriber-profile id=<SUB_PROFILE_ID>;
Output ParametersTRANSACTION_ID compound parameter
ASDL_COUNTER
A_CSCO-BTS10200_4-4_DEL_SUBSCRIBER-SERVICE-PROFILEDelete a subscriber service profile. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsSub.delSubscriberServiceProfile.
Table 2–68 A_CSCO-BTS10200_4-4_DEL_SUBSCRIBER-PROFILE
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE identifier. N/A N/A S R
SUB_PROFILE_ID Subscriber profile ID. N/A N/A S R
TRANSACTION_ID Transaction ID returned by NE after MML command is processed.
N/A N/A C O
ASDL_COUNTER ASDL sequence number in CSDL. For internal processing use only.
N/A N/A S O
Table 2–69 A_CSCO-BTS10200_4-4_DEL_SUBSCRIBER-SERVICE-PROFILE
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE identifier. N/A N/A S R
SUB_ID Subscriber ID. N/A N/A S R
ASDL Commands
Atomic Service Description Layer (ASDL) Commands 2-59
MML commands
MML Syntax :
delete subscriber-service-profile sub-id=<SUB_ID>;service-id=<SERVICE_ID>;
Output ParametersTRANSACTION_ID compound parameter
ASDL_COUNTER
A_CSCO-BTS10200_4-4_DEL_SUBSCRIBER-TIME-OF-DAYDelete a subscriber time of day. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsSub.delSubscriberTimeOfDay.
MML commands
MML Syntax :
delete subscriber-tod-schedule sub-id==<SUB_ID>;
Output ParametersTRANSACTION_ID compound parameter
ASDL_COUNTER
A_CSCO-BTS10200_4-4_DEL_TERMINATIONDelete a termination. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsMgw.delTermination.
SERVICE_ID Service ID. N/A N/A C R
TRANSACTION_ID Transaction ID returned by NE after MML command is processed.
N/A N/A C O
ASDL_COUNTER ASDL sequence number in CSDL. For internal processing use only.
N/A N/A S O
Table 2–70 A_CSCO-BTS10200_4-4_DEL_SUBSCRIBER-TIME-OF-DAY
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE identifier. N/A N/A S R
SUB_ID Subscriber ID. N/A N/A S R
TRANSACTION_ID Transaction ID returned by NE after MML command is processed.
N/A N/A C O
ASDL_COUNTER ASDL sequence number in CSDL. For internal processing use only.
N/A N/A S O
Table 2–69 (Cont.) A_CSCO-BTS10200_4-4_DEL_SUBSCRIBER-SERVICE-PROFILE
Parameter Name Description RangeDefault Value Type Class
ASDL Commands
2-60 Product Title/BookTitle as a Variable
MML commands
MML Syntax :
delete termination prefix=<PREFIX>; port-start=<PORT-START>; port-end=<PORTEND>; mgw-id=<MGW-ID>;
Output ParametersTRANSACTION_ID compound parameter
ASDL_COUNTER
A_CSCO-BTS10200_4-4_DEL_TWO-DIGIT-SPEED-CALLDelete a speed call two digit. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsSub.delTwoDigitSpeedCall.
Table 2–71 A_CSCO-BTS10200_4-4_DEL_TERMINATION
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE Identifier N/A N/A S R
MGW_ID ID of the media gateway(1-32 ASCII characters).
N/A N/A S R
PREFIX N/A N/A S R
PORT_START User assigned token id N/A N/A S R
PORT_END Port number start N/A N/A S R
ASDL_COUNTER ASDL sequence counter in CSDL. For internal processing use only.
N/A N/A S O
TRANSACTION_ID Transaction ID returned by NE after processing MML command.
N/A N/A C O
Table 2–72 A_CSCO-BTS10200_4-4_DEL_TWO-DIGIT-SPEED-CALL
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE identifier. N/A N/A S R
SUB_ID Subscriber ID. N/A N/A S R
DN20 Directory number. N/A N/A S O
DN21 Directory number. N/A N/A S O
DN22 Directory number. N/A N/A S O
DN23 Directory number. N/A N/A S O
DN24 Directory number. N/A N/A S O
DN25 Directory number. N/A N/A S O
DN26 Directory number. N/A N/A S O
DN27 Directory number. N/A N/A S O
DN28 Directory number. N/A N/A S O
ASDL Commands
Atomic Service Description Layer (ASDL) Commands 2-61
MML commands
MML Syntax :
delete sc2d sub-id=<SUB_ID>;dn20=<DN20>;dn21=<DN21>;dn22=<DN22>;dn23=<DN23>;dn24=<DN24>;dn25=<DN25>;dn26=<DN26>;dn27=<DN27>;dn28=<DN28>;dn29=<DN29>;dn30=<DN30>;dn31=<DN31>;dn32=<DN32>;dn33=<DN33>;dn34=<DN34>;dn35=<DN35>;dn36=<DN36>;dn37=<DN37>;dn38=<DN38>;dn39=<DN39>;dn40=<DN40>;dn41=<DN41>;dn42=<DN42>;dn43=<DN43>;dn44=<DN44>;dn45=<DN45>;dn46=<DN46>;dn47=<DN47>;dn48=<DN48>;dn49=<DN49>;
Output ParametersTRANSACTION_ID compound parameter
ASDL_COUNTER
DN29 Directory number. N/A N/A S O
DN30 Directory number. N/A N/A S O
DN31 Directory number. N/A N/A S O
DN32 Directory number. N/A N/A S O
DN33 Directory number. N/A N/A S O
DN34 Directory number. N/A N/A S O
DN35 Directory number. N/A N/A S O
DN36 Directory number. N/A N/A S O
DN37 Directory number. N/A N/A S O
DN38 Directory number. N/A N/A S O
DN39 Directory number. N/A N/A S O
DN40 Directory number. N/A N/A S O
DN41 Directory number. N/A N/A S O
DN42 Directory number. N/A N/A S O
DN43 Directory number. N/A N/A S O
DN44 Directory number. N/A N/A S O
DN45 Directory number. N/A N/A S O
DN46 Directory number. N/A N/A S O
DN47 Directory number. N/A N/A S O
DN48 Directory number. N/A N/A S O
DN49 Directory number. N/A N/A S O
TRANSACTION_ID Transaction ID returned by NE after MML command is processed.
N/A N/A C O
ASDL_COUNTER ASDL sequence number in CSDL. For internal processing use only.
N/A N/A S O
Table 2–72 (Cont.) A_CSCO-BTS10200_4-4_DEL_TWO-DIGIT-SPEED-CALL
Parameter Name Description RangeDefault Value Type Class
ASDL Commands
2-62 Product Title/BookTitle as a Variable
A_CSCO-BTS10200_4-4_DEL_USER-AUTHENTICATIONDelete a user authentication . It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsSip.delUserAuthentication.
MML commands
MML Syntax :
delete user-auth auth-user=<AUTH_USER>;auth-realm-id=<AUTH_REALM_ID>;aorid=<AOR_ID>;
Output ParametersTRANSACTION_ID compound parameter
ASDL_COUNTER
A_CSCO-BTS10200_4-4_EQUIP_SUBSCRIBER-TERMINATIONEquip subscriber-termination. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsAdmin.equipSubscriberTermination.
MML commands
MML Syntax :
unequip subscriber-termination id=<SUBSCRIBER_ID>;
Output ParametersNone.
Table 2–73 A_CSCO-BTS10200_4-4_DEL_USER-AUTHENTICATION
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE Identifier N/A N/A S R
AUTH_USER authentication user name. N/A N/A S R
AUTH_REALM_ID authentication realm id N/A N/A S O
AOR_ID Address of record id N/A N/A S O
ASDL_COUNTER ASDL sequence counter in CSDL. For internal processing use only.
N/A N/A S O
TRANSACTION_ID Transaction ID returned by NE after processing MML command.
N/A N/A C O
Table 2–74 A_CSCO-BTS10200_4-4_EQUIP_SUBSCRIBER-TERMINATION
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE Identifier N/A N/A S R
SUBSCRIBER_TERMINATION_ID
Subscriber termination Id on a particular gateway.
N/A N/A S R
ASDL Commands
Atomic Service Description Layer (ASDL) Commands 2-63
A_CSCO-BTS10200_4-4_MOD_AOR-TO-SUBSCRIBERModify address of record to subscriber. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsSip.modAorToSubscriber.
MML commands
MML Syntax :
change aor2sub aor-id=<AOR_ID>;sub-id=<SUB_ID>;
Output ParametersTRANSACTION_ID compound parameter
ASDL_COUNTER
A_CSCO-BTS10200_4-4_MOD_AOR-TO-SUBSCRIBER-ROLLBACKRollback modify address of record to subscriber. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsSip.modAorToSubscriberRollback.
MML commands
MML Syntax :
change aor2sub aor-id=<OLD_AOR_ID>;sub-id=<OLD_SUB_ID>;
Table 2–75 A_CSCO-BTS10200_4-4_MOD_AOR-TO-SUBSCRIBER
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE Identifier N/A N/A S R
AOR_ID Address of record id for the subscriber. N/A N/A C R
SUB_ID Subscriber ID N/A N/A S R
ASDL_COUNTER ASDL sequence counter in CSDL. For internal processing use only.
N/A N/A S O
TRANSACTION_ID Transaction ID returned by NE after processing MML command.
N/A N/A C O
Table 2–76 A_CSCO-BTS10200_4-4_MOD_AOR-TO-SUBSCRIBER-ROLLBACK
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE Identifier N/A N/A S R
OLD_AOR_ID Old value of address of record id for the subscriber.
N/A N/A C R
OLD_SUB_ID Old Subscriber ID N/A N/A S R
ASDL_COUNTER ASDL sequence counter in CSDL. For internal processing use only.
N/A N/A S O
TRANSACTION_ID Transaction ID returned by NE after processing MML command.
N/A N/A C O
ASDL Commands
2-64 Product Title/BookTitle as a Variable
Output ParametersTRANSACTION_ID compound parameter
ASDL_COUNTER
A_CSCO-BTS10200_4-4_MOD_AUTHORIZATION-CODEModify an authorization code. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsSub.modAuthorizationCode.
MML commands
MML Syntax :
change auth-code id=<AUTH_ID>;auth-code-grp-id=<AUTH_CODE_GROUP_ID>;active=<AUTH_ACTIVE>;cos-restrict-id=<COS_RESTRICT_ID>;
Output ParametersTRANSACTION_ID compound parameter
ASDL_COUNTER
A_CSCO-BTS10200_4-4_MOD_AUTHORIZATION-CODE-GROUPModify an authorization code group. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsSub.modAuthorizationCodeGroup.
Table 2–77 A_CSCO-BTS10200_4-4_MOD_AUTHORIZATION-CODE
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE identifier. N/A N/A S R
AUTH_ID Dialed authorization code. N/A N/A S R
AUTH_CODE_GROUP_ID
Authorization code group ID. N/A N/A S R
AUTH_ACTIVE Indicates status of the authorization code.
N/A N/A S O
COS_RESTRICT_ID Class of service restriction ID. N/A N/A S O
TRANSACTION_ID Transaction ID returned by NE after MML command is processed.
N/A N/A C O
ASDL_COUNTER ASDL sequence number in CSDL. For internal processing use only.
N/A N/A S O
ASDL Commands
Atomic Service Description Layer (ASDL) Commands 2-65
MML commands
MML Syntax :
change auth-code-grp id=<AUTH_CODE_GROUP_ID>;description=<DESCRIPTION>;
Output ParametersTRANSACTION_ID compound parameter
ASDL_COUNTER
A_CSCO-BTS10200_4-4_MOD_AUTHORIZATION-CODE-GROUP-ROLLBACKModify an authorization code group. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsSub.modAuthorizationCodeGroupRollback.
MML commands
MML Syntax :
change auth-code-grp id=<OLD_AUTH_CODE_GROUP_ID>;description=<OLD_DESCRIPTION>;
Table 2–78 A_CSCO-BTS10200_4-4_MOD_AUTHORIZATION-CODE-GROUP
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE identifier. N/A N/A S R
AUTH_CODE_GROUP_ID
Authorization code group ID. N/A N/A S R
DESCRIPTION Service provider's description of authorization code.
N/A N/A S O
TRANSACTION_ID Transaction ID returned by NE after MML command is processed.
N/A N/A C O
ASDL_COUNTER ASDL sequence number in CSDL. For internal processing use only.
N/A N/A S O
Table 2–79 A_CSCO-BTS10200_4-4_MOD_AUTHORIZATION-CODE-GROUP-ROLLBACK
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE identifier. N/A N/A S R
OLD_AUTH_CODE_GROUP_ID
Authorization code group ID. N/A N/A S R
OLD_DESCRIPTION Service provider's description of authorization code.
N/A N/A S O
TRANSACTION_ID Transaction ID returned by NE after MML command is processed.
N/A N/A C O
ASDL_COUNTER ASDL sequence number in CSDL. For internal processing use only.
N/A N/A S O
ASDL Commands
2-66 Product Title/BookTitle as a Variable
Output ParametersTRANSACTION_ID compound parameter
ASDL_COUNTER
A_CSCO-BTS10200_4-4_MOD_AUTHORIZATION-CODE-ROLLBACKModify an authorization code. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsSub.modAuthorizationCodeRollback.
MML commands
MML Syntax :
change auth-code id=<OLD_AUTH_ID>;auth-code-grp-id=<OLD_AUTH_CODE_GROUP_ID>;active=<OLD_AUTH_ACTIVE>;cos-restrict-id=<OLD_COS_RESTRICT_ID>;
Output ParametersTRANSACTION_ID compound parameter
ASDL_COUNTER
A_CSCO-BTS10200_4-4_MOD_CHANGED-NUMBERModify a changed number. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsSub.modChangednumber.
Table 2–80 A_CSCO-BTS10200_4-4_MOD_AUTHORIZATION-CODE-ROLLBACK
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE identifier. N/A N/A S R
OLD_AUTH_ID Dialed authorization code. N/A N/A S R
OLD_AUTH_CODE_GROUP_ID
Authorization code group ID. N/A N/A S R
OLD_AUTH_ACTIVE Indicates status of the authorization code.
N/A N/A S O
OLD_COS_RESTRICT_ID
Class of service restriction ID. N/A N/A S O
TRANSACTION_ID Transaction ID returned by NE after MML command is processed.
N/A N/A C O
ASDL_COUNTER ASDL sequence number in CSDL. For internal processing use only.
N/A N/A S O
Table 2–81 A_CSCO-BTS10200_4-4_MOD_CHANGED-NUMBER
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE identifier. N/A N/A S R
OLD_DN The old subscriber directory number. N/A N/A S R
ASDL Commands
Atomic Service Description Layer (ASDL) Commands 2-67
MML commands
MML Syntax :
change changed-number old-dn=<OLD_DN>;new-dn=<NEW_DN>;
Output ParametersTRANSACTION_ID compound parameter
ASDL_COUNTER
A_CSCO-BTS10200_4-4_MOD_CHANGED-NUMBER-ROLLBACKModify a changed number. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsSub.modChangednumberRollback.
MML commands
MML Syntax :
change changed-number old-dn=<OLD_OLD_DN>;new-dn=<OLD_NEW_DN>;
Output ParametersTRANSACTION_ID compound parameter
ASDL_COUNTER
NEW_DN The changed or new subscriber DN. N/A N/A S R
TRANSACTION_ID Transaction ID returned by NE after MML command is processed.
N/A N/A C O
ASDL_COUNTER ASDL sequence number in CSDL. For internal processing use only.
N/A N/A S O
Table 2–82 A_CSCO-BTS10200_4-4_MOD_CHANGED-NUMBER-ROLLBACK
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE identifier. N/A N/A S R
OLD_OLD_DN The old subscriber directory number. N/A N/A S R
OLD_NEW_DN The changed or new subscriber DN. N/A N/A S R
TRANSACTION_ID Transaction ID returned by NE after MML command is processed.
N/A N/A C O
ASDL_COUNTER ASDL sequence number in CSDL. For internal processing use only.
N/A N/A S O
Table 2–81 (Cont.) A_CSCO-BTS10200_4-4_MOD_CHANGED-NUMBER
Parameter Name Description RangeDefault Value Type Class
ASDL Commands
2-68 Product Title/BookTitle as a Variable
A_CSCO-BTS10200_4-4_MOD_DN-TO-SUBSCRIBERModify a DN2Subscriber. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsSub.modDnToSubscriber.
MML commands
MML Syntax :
change dn2subscriber office-code-index=<OFFICE_CODE_INDEX >;dn=<DN>;status=<DN2SUB_STATUS>;fdn=<FDN>;from-dn=<FROM_DN>;to-dn=<TO_DN>;annc-id= ANOUNCEMENT_ID ;sub-id=<SUB_ID>;lnp-trigger=<LNP_TRIGGER>;np-reserved=<NP_RESERVED>;
Output ParametersTRANSACTION_ID compound parameter
ASDL_COUNTER
A_CSCO-BTS10200_4-4_MOD_DN-TO-SUBSCRIBER-ROLLBACKModify a DN2Subscriber. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsSub.modDnToSubscriberRollback.
Table 2–83 A_CSCO-BTS10200_4-4_MOD_DN-TO-SUBSCRIBER
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE identifier. N/A N/A S R
OFFICE_CODE_INDEX
Office code index. N/A N/A S R
DN Directory number assigned to a subscriber.
N/A N/A S R
DN2SUB_STATUS Status. N/A N/A S R
FDN Full directory number. N/A N/A S O
FROM_DN From directory number. N/A N/A S O
TO_DN To directory number. N/A N/A S O
ANOUNCEMENT_ID Announcement ID. N/A N/A S O
SUB_ID Subscriber ID of the calling directory number.
N/A N/A S O
LNP_TRIGGER Local number portability query. N/A N/A S O
NP_RESERVED Local number portability and number pooling.
N/A N/A S O
TRANSACTION_ID Transaction ID returned by NE after MML command is processed.
N/A N/A C O
ASDL_COUNTER ASDL sequence number in CSDL. For internal processing use only.
N/A N/A S O
ASDL Commands
Atomic Service Description Layer (ASDL) Commands 2-69
MML commands
MML Syntax :
change dn2subscriber office-code-index=<OLD_OFFICE_CODE_INDEX >;dn=<OLD_DN>;status=<OLD_DN2SUB_STATUS>;fdn=<OLD_FDN>;from-dn=<OLD_FROM_DN>;to-dn=<OLD_TO_DN>;annc-id= OLD_ANOUNCEMENT_ID ;sub-id=<OLD_SUB_ID>;lnp-trigger=<OLD_LNP_TRIGGER>;np-reserved=<OLD_NP_RESERVED>;
Output ParametersTRANSACTION_ID compound parameter
ASDL_COUNTER
A_CSCO-BTS10200_4-4_MOD_MAC-TO-SUBSCRIBERModify a MAC address to subscriber. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsSip.modMacToSubscriber.
Table 2–84 A_CSCO-BTS10200_4-4_MOD_DN-TO-SUBSCRIBER-ROLLBACK
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE identifier. N/A N/A S R
OLD_OFFICE_CODE_INDEX
Old value of office code index. N/A N/A S R
OLD_DN Old value of directory number assigned to a subscriber.
N/A N/A S R
OLD_DN2SUB_STATUS
Old value of status. N/A N/A S R
OLD_FDN Old value of full directory number. N/A N/A S O
OLD_FROM_DN Old value of from directory number. N/A N/A S O
OLD_TO_DN Old value of to directory number. N/A N/A S O
OLD_ANOUNCEMENT_ID
Old value of Announcement ID. N/A N/A S O
OLD_SUB_ID Old value of Subscriber ID of the calling directory number.
N/A N/A S O
OLD_LNP_TRIGGER Old value of local number portability query.
N/A N/A S O
OLD_NP_RESERVED Old value of local number portability and number pooling.
N/A N/A S O
TRANSACTION_ID Transaction ID returned by NE after MML command is processed.
N/A N/A C O
ASDL_COUNTER ASDL sequence number in CSDL. For internal processing use only.
N/A N/A S O
ASDL Commands
2-70 Product Title/BookTitle as a Variable
MML commands
MML Syntax :
change mac2sub mac-id=<MAC_ID>;sub-id=<SUB_ID>;
Output ParametersTRANSACTION_ID compound parameter
ASDL_COUNTER
A_CSCO-BTS10200_4-4_MOD_MAC-TO-SUBSCRIBER-ROLLBACKModify a MAC address to subscriber. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsSip.modMacToSubscriberRollback.
MML commands
MML Syntax :
change mac2sub mac-id=<OLD_MAC_ID>;sub-id=<OLD_SUB_ID>;
Output ParametersTRANSACTION_ID compound parameter
ASDL_COUNTER
Table 2–85 A_CSCO-BTS10200_4-4_MOD_MAC-TO-SUBSCRIBER
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE Identifier N/A N/A S R
MAC_ID Mac Address N/A N/A C R
SUB_ID Subscriber ID. N/A N/A S R
ASDL_COUNTER ASDL sequence counter in CSDL. For internal processing use only.
N/A N/A S O
TRANSACTION_ID Transaction ID returned by NE after processing MML command.
N/A N/A C O
Table 2–86 A_CSCO-BTS10200_4-4_MOD_MAC-TO-SUBSCRIBER-ROLLBACK
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE Identifier N/A N/A S R
OLD_MAC_ID Mac Address N/A N/A C R
OLD_SUB_ID Subscriber ID. N/A N/A S R
ASDL_COUNTER ASDL sequence counter in CSDL. For internal processing use only.
N/A N/A S O
TRANSACTION_ID Transaction ID returned by NE after processing MML command.
N/A N/A C O
ASDL Commands
Atomic Service Description Layer (ASDL) Commands 2-71
A_CSCO-BTS10200_4-4_MOD_MGPModify a media gateway provisioning. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsMgp.modMgp.
MML commands
MML Syntax :
change mgp ip-addr=<IP_ADDR>;type=<MGP_TYPE>;user-name=<USER_NAME>;password=<MGP_PASSWORD>;
Output ParametersTRANSACTION_ID compound parameter
ASDL_COUNTER
A_CSCO-BTS10200_4-4_MOD_MGP-ROLLBACKModify a media gateway provisioning. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsMgp.modMgpRollback.
Table 2–87 A_CSCO-BTS10200_4-4_MOD_MGP
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE identifier. N/A N/A S R
IP_ADDR IP address of the device. N/A N/A S R
MGP_TYPE Type of gateway. N/A N/A S R
USER_NAME User name used to access the gateway. N/A N/A S R
MGP_PASSWORD Password used to access the gateway. N/A N/A S R
ASDL_COUNTER ASDL sequence counter in CSDL. For internal processing use only.
N/A N/A S O
TRANSACTION_ID Transaction ID returned by NE after processing MML command.
N/A N/A C O
Table 2–88 A_CSCO-BTS10200_4-4_MOD_MGP-ROLLBACK
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE identifier. N/A N/A S R
OLD_IP_ADDR IP address of the device. N/A N/A S R
OLD_MGP_TYPE Type of gateway. N/A N/A S R
OLD_USER_NAME User name used to access the gateway. N/A N/A S R
OLD_MGP_PASSWORD
Password used to access the gateway. N/A N/A S R
ASDL_COUNTER ASDL sequence counter in CSDL. For internal processing use only.
N/A N/A S O
TRANSACTION_ID Transaction ID returned by NE after processing MML command.
N/A N/A C O
ASDL Commands
2-72 Product Title/BookTitle as a Variable
MML commands
MML Syntax :
change mgp ip-addr=<OLD_IP_ADDR > ;type=<OLD_MGP_TYPE>;user-name=<OLD_USER_NAME> ;password=<OLD_MGP_PASSWORD>;
Output ParametersTRANSACTION_ID compound parameter
ASDL_COUNTER
A_CSCO-BTS10200_4-4_MOD_MGWModify a media gateway. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsMgw.modMgw.
MML commands
MML Syntax :
change mgw id=<MGW_ID>; tsap-addr=<TSAP_ADDR>; call-agent-id=<CALL_AGENT_ID>; mgwprofile-id=<MGW_PROFILE_ID>; type=<MGW_TYPE>; aggr-id=<AGGR_ID>; call-agentcontrol-port = <CALL_AGENT_CONTROL_PORT>; status = <MGW_STATUS>;
Table 2–89 A_CSCO-BTS10200_4-4_MOD_MGW
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE Identifier N/A N/A S R
MGW_ID The media gateway identifier (1-32 ASCII characters).
N/A N/A S R
CALL_AGENT_ID ID of the call-agent the subscriber is assigned to in the Call Agent table (1-16 ASCII characters).
N/A N/A S O
MGW_PROFILE_ID ID of the mgw-profile the subscriber is assigned to in the MGW Profile table (1-16 ASCII characters).
N/A N/A S O
TSAP_ADDR Domain name, IP address or IP address and port number of the device to manage. (1-64 ASCII characters)
N/A N/A S O
MGW_TYPE Type of gateway. N/A N/A S O
AGGR_ID ID of the aggregation devic cable modem termination system (1-16 ASCII characters).
N/A N/A S O
CALL_AGENT_CONTROL_PORT
Call Agent MGCP listening port for the MGW.
N/A N/A S O
MGW_STATUS Service state of the MGW. N/A N/A S O
ASDL_COUNTER ASDL sequence counter in CSDL. For internal processing use only.
N/A N/A S O
TRANSACTION_ID Transaction ID returned by NE after processing MML command.
N/A N/A C O
ASDL Commands
Atomic Service Description Layer (ASDL) Commands 2-73
Output ParametersTRANSACTION_ID compound parameter
ASDL_COUNTER
A_CSCO-BTS10200_4-4_MOD_MGW-ROLLBACKRollbacks modify media gateway. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsMgw.modMgwRollback.
MML commands
MML Syntax :
change mgw id=<OLD_MGW_ID>; tsap-addr=<OLD_TSAP_ADDR>; call-agent-id=<OLD_CALL_AGENT_ID>; mgwprofile-id=<OLD_MGW_PROFILE_ID>; type=<OLD_MGW_TYPE>; aggr-id=<OLD_AGGR_ID>; call-agentcontrol-port = <OLD_CALL_AGENT_CONTROL_PORT>; status = <OLD_MGW_STATUS>;
Output ParametersTRANSACTION_ID compound parameter
ASDL_COUNTER
Table 2–90 A_CSCO-BTS10200_4-4_MOD_MGW-ROLLBACK
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE Identifier N/A N/A S R
OLD_MGW_ID The media gateway identifier (1-32 ASCII characters).
N/A N/A S R
OLD_CALL_AGENT_ID
ID of the call-agent the subscriber is assigned to in the Call Agent table (1-16 ASCII characters).
N/A N/A S O
OLD_MGW_PROFILE_ID
ID of the mgw-profile the subscriber is assigned to in the MGW Profile table (1-16 ASCII characters).
N/A N/A S O
OLD_TSAP_ADDR Domain name, IP address or IP address and port number of the device to manage. (1-64 ASCII characters)
N/A N/A S O
OLD_MGW_TYPE Type of gateway. N/A N/A S O
OLD_AGGR_ID ID of the aggregation devic cable modem termination system (1-16 ASCII characters).
N/A N/A S O
OLD_CALL_AGENT_CONTROL_PORT
Call Agent MGCP listening port for the MGW.
N/A N/A S O
OLD_MGW_STATUS Service state of the MGW. N/A N/A S O
ASDL_COUNTER ASDL sequence counter in CSDL. For internal processing use only.
N/A N/A S O
TRANSACTION_ID Transaction ID returned by NE after processing MML command.
N/A N/A C O
ASDL Commands
2-74 Product Title/BookTitle as a Variable
A_CSCO-BTS10200_4-4_MOD_ONE-DIGIT-SPEED-CALLModify a speed call one digit. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsSub.modOneDigitSpeedCall.
MML commands
MML Syntax :
change sc1d sub-id=<SUB_ID>;dn2=<DN2>;dn3=<DN3>;dn4=<DN4>;dn5=<DN5>;dn6=<DN6>; dn7=<DN7>;dn8=<DN8>;dn9=<DN9>;
Output ParametersTRANSACTION_ID compound parameter
ASDL_COUNTER
A_CSCO-BTS10200_4-4_MOD_ONE-DIGIT-SPEED-CALL-ROLLBACKModify a speed call one digit. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsSub.modOneDigitSpeedCallRollback.
Table 2–91 A_CSCO-BTS10200_4-4_MOD_ONE-DIGIT-SPEED-CALL
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE identifier. N/A N/A S R
SUB_ID Subscriber ID. N/A N/A S R
DN2 Directory number. N/A N/A S O
DN3 Directory number. N/A N/A S O
DN4 Directory number. N/A N/A S O
DN5 Directory number. N/A N/A S O
DN6 Directory number. N/A N/A S O
DN7 Directory number. N/A N/A S O
DN8 Directory number. N/A N/A S O
DN9 Directory number. N/A N/A S O
TRANSACTION_ID Transaction ID returned by NE after MML command is processed.
N/A N/A C O
ASDL_COUNTER ASDL sequence number in CSDL. For internal processing use only.
N/A N/A S O
Table 2–92 A_CSCO-BTS10200_4-4_MOD_ONE-DIGIT-SPEED-CALL-ROLLBACK
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE identifier. N/A N/A S R
OLD_SUB_ID Subscriber ID. N/A N/A S R
OLD_DN2 Directory number. N/A N/A S O
ASDL Commands
Atomic Service Description Layer (ASDL) Commands 2-75
MML commands
MML Syntax :
change sc1d sub-id=<OLD_SUB_ID>;dn2=<OLD_DN2>;dn3=<OLD_DN3>;dn4=<OLD_DN4>;dn5=<OLD_DN5>;dn6=<OLD_DN6>;dn7=<OLD_DN7>;dn8=<OLD_DN8>;dn9=<OLD_DN9>;
Output ParametersTRANSACTION_ID compound parameter
ASDL_COUNTER
A_CSCO-BTS10200_4-4_MOD_SCREEN-LISTModify a screening list editing. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsSub.modScreenList.
OLD_DN3 Directory number. N/A N/A S O
OLD_DN4 Directory number. N/A N/A S O
OLD_DN5 Directory number. N/A N/A S O
OLD_DN6 Directory number. N/A N/A S O
OLD_DN7 Directory number. N/A N/A S O
OLD_DN8 Directory number. N/A N/A S O
OLD_DN9 Directory number. N/A N/A S O
TRANSACTION_ID Transaction ID returned by NE after MML command is processed.
N/A N/A C O
ASDL_COUNTER ASDL sequence number in CSDL. For internal processing use only.
N/A N/A S O
Table 2–93 A_CSCO-BTS10200_4-4_MOD_SCREEN-LIST
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE identifier. N/A N/A S R
SUB_ID Subscriber ID from the subscriber. N/A N/A S R
FEATURE_NAME Type of screening feature. N/A N/A C R
DN Directory number entry. N/A N/A C R
ANONYMOUS Anonymous entry. Permitted values are: Y/N.
N/A N/A C O
TIMESTAMP The date and time the entry was added. Integer values permitted from 1 to 9999.
N/A N/A C O
TRANSACTION_ID Transaction ID returned by NE after MML command is processed.
N/A N/A C O
ASDL_COUNTER ASDL sequence number in CSDL. For internal processing use only.
N/A N/A S O
Table 2–92 (Cont.) A_CSCO-BTS10200_4-4_MOD_ONE-DIGIT-SPEED-CALL-ROLLBACK
Parameter Name Description RangeDefault Value Type Class
ASDL Commands
2-76 Product Title/BookTitle as a Variable
MML commands
MML Syntax :
change sle sub-id=<SUB_ID>;fname=<FEATURE_NAME>;dn=<DN>;anonymous=<ANONYMOUS>;t-stamp=<TIMESTAMP>;
Output ParametersTRANSACTION_ID compound parameter
ASDL_COUNTER
A_CSCO-BTS10200_4-4_MOD_SCREEN-LIST-ROLLBACKModify a screening list editing. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsSub.modScreenListRollback.
MML commands
MML Syntax :
change sle sub-id=<OLD_SUB_ID>;fname=<OLD_FEATURE_NAME>;dn=<OLD_DN>;anonymous=<OLD_ANONYMOUS>;t-stamp=<OLD_TIMESTAMP> ;
Output ParametersTRANSACTION_ID compound parameter
ASDL_COUNTER
A_CSCO-BTS10200_4-4_MOD_SUBSCRIBERModify a subscriber. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsSub.modSubscriber.
Table 2–94 A_CSCO-BTS10200_4-4_MOD_SCREEN-LIST-ROLLBACK
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE identifier. N/A N/A S R
OLD_SUB_ID Subscriber ID from the subscriber. N/A N/A S R
OLD_FEATURE_NAME
Old value of type of screening feature. N/A N/A C R
OLD_DN Old directory number entry. N/A N/A C R
OLD_ANONYMOUS Old anonymous entry. Permitted values are: Y/N.
N/A N/A C O
OLD_TIMESTAMP Old value of the date and time the entry was added. Integer value permitted from 1 to 9999.
N/A N/A C O
TRANSACTION_ID Transaction ID returned by NE after MML command is processed.
N/A N/A C O
ASDL_COUNTER ASDL sequence number in CSDL. For internal processing use only.
N/A N/A S O
ASDL Commands
Atomic Service Description Layer (ASDL) Commands 2-77
Table 2–95 A_CSCO-BTS10200_4-4_MOD_SUBSCRIBER
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE identifier. N/A N/A S R
ID Subscriber ID. N/A N/A S R
ADDRESS1 Address of the subscriber. N/A N/A S O
ADDRESS2 Address of the subscriber. N/A N/A S O
AOR_ID Address of the record ID. N/A N/A S O
BILLING_DN Billing DN. N/A N/A S O
BILLING_TYPE Subscriber billing type. N/A N/A S O
CATEGORY Subscriber category. N/A N/A S O
CITY City of the subscriber. N/A N/A S O
COS_RESTRICT_ID COS restriction ID. N/A N/A S O
COUNTRY Country of the subscriber. N/A N/A S O
CTXG_ID ID in the Centrex Group table. N/A N/A S O
DN1 Subscriber directory number (DN). N/A N/A S O
GROUP Group. N/A N/A S O
H323_TERM_ID The termination ID for an H323 terminal.
N/A N/A S O
IMMEDIATE_RELEASE
Immediate release procedure. N/A N/A S O
LANGUAGE Subscriber's preferred spoken language. N/A N/A S O
MAC_ID MAC ID for the subscriber. N/A N/A S O
MGW_ID Media gateway ID. N/A N/A S O
MLHG_ID Multiline Hunt Group ID. N/A N/A S O
MLHG_PREF_LIST_ID MLGH preference list ID. N/A N/A S O
MWI_ON Message waiting indicator on status. N/A N/A S O
NAME Subscriber name. N/A N/A S O
PIC1 Preferred interLATA carrier (PIC). N/A N/A S O
PIC2 Preferred interLATA carrier (PIC) 2. N/A N/A S O
PIC3 Preferred interLATA carrier (PIC) 3. N/A N/A S O
POLICY_ID Policy ID. N/A N/A S O
PORTED_IN Permitted values are: Y/N. N/A N/A S O
PRIVACY Privacy. N/A N/A S O
PRIVACY_MANAGER_ID
Privacy manager ID. N/A N/A S O
QOS_ID QOS index. N/A N/A S O
RING_TYPE_DN1 Ring type for DN1. N/A N/A S O
SEND_BDN_AS_CPN Send the billing DN of the subscriber as a CPN.
N/A N/A S O
SEND_BDN_FOREMG Send the billing. N/A N/A S O
ASDL Commands
2-78 Product Title/BookTitle as a Variable
MML commands
MML Syntax :
change subscriber id=<ID>;address1=<ADDRESS1>;address2=<ADDRESS2>;aor-id=<AOR_ID>;billing-dn=<BILLING_DN>;billing-type=<BILLING_TYPE>;category=<CATEGORY>;city=<CITY>;cos-restrict-id=<COS_RESTRICT_ID>;country=<COUNTRY>;ctxg-id=<CTXG_ID>;dn1=<DN1>;grp=<GROUP>;h323-term-id=<H323_TERM_ID>;immediate-release=<IMMEDIATE_RELEASE> ;language=<LANGUAGE > ;mac-id=<MAC_ID>;mgw-id=<MGW_ID>;mlhg-id=<MLHG_ID>;mlhg-pref-list-id=<MLHG_PREF_LIST_ID>;mwi-on=<MWI_ON>;name=<NAME>;pic1=<PIC1>;pic2=<PIC2>;pic3=<PIC3>;policy-id=<POLICY_ID > ;ported-in=<PORTED_IN>;privacy=<PRIVACY>;privacy-manager-id=<PRIVACY_MANAGER_ID > ;qos-id=<QOS_ID>;ring-type-dn1=<RING_TYPE_DN1>;send-bdn-as-cpn=<SEND_BDN_AS_CPN>;send-bdn-for-emg=<SEND_BDN_FOREMG>;send-billing-dn=<SEND_BILLING_DN>;state=<STATE>;status=<STATUS>;sub-profileid=<SUB_PROFILE_ID>;term-id=<TERM_ID>;terminating-immediaterel=<TERMINATING_IMMEDIATE_REL>;term-type=<TERM_TYPE>;tgn-id=<TRUNK_GROUP_ID>;usage-sens=<USAGE_SENSITIVE_FEATURE>;voice-mailid=<VOICE_MAIL_ID>;zipcode=<ZIPCODE>;
Output ParametersTRANSACTION_ID compound parameter
ASDL_COUNTER
STATE State designation. N/A N/A S O
SUB_STATUS Indicates the subscriber status. N/A N/A S O
SUB_PROFILE_ID Subscriber profile ID. N/A N/A S O
TERM_ID Termination ID. N/A N/A S O
TERMINATING_IMMEDIATE_REL
Terminating immediate release. N/A N/A S O
TERM_TYPE Termination type. N/A N/A S O
TRUNK_GROUP_ID Trunk group ID. N/A N/A S O
USAGE_SENSITIVE_FEATURE
Usage sensitive features. N/A N/A S O
VOICE_MAIL_ID Voice mail ID. N/A N/A S O
ZIPCODE Subscriber's zip code. N/A N/A S O
TRANSACTION_ID Transaction ID returned by NE after MML command is processed.
N/A N/A C O
ASDL_COUNTER ASDL sequence number in CSDL. For internal processing use only.
N/A N/A S O
Table 2–95 (Cont.) A_CSCO-BTS10200_4-4_MOD_SUBSCRIBER
Parameter Name Description RangeDefault Value Type Class
ASDL Commands
Atomic Service Description Layer (ASDL) Commands 2-79
A_CSCO-BTS10200_4-4_MOD_SUBSCRIBER-FEATURESModify subscriber features. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsSub.modSubscriberFeatures.
MML commands
MML Syntax :
change subscriber-feature-data sub-id=<SUB_ID>;fname=<FEATURE_NAME>;active=<ACTIVE>;type1=<TYPE1 > ;value1=<VALUE1>;type2=<TYPE2 > ; value2=<VALUE2>;type3=<TYPE3 > ;value3=<VALUE3>;type4=<TYPE4 > ; value4=<VALUE4>;voice-mail-id=<VOICE-MAILID>;
Output ParametersTRANSACTION_ID compound parameter
ASDL_COUNTER
A_CSCO-BTS10200_4-4_MOD_SUBSCRIBER-FEATURES-ROLLBACKRollback modify subscriber feature data. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsSub.modSubscriberFeaturesRollback.
Table 2–96 A_CSCO-BTS10200_4-4_MOD_SUBSCRIBER-FEATURES
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE identifier. N/A N/A S R
SUB_ID Subscriber ID. N/A N/A S R
FEATURE_NAME Feature name. N/A N/A C R
ACTIVE Specifies if the sub ID is activated. N/A N/A C O
TYPE1 Feature data type 1. N/A N/A C O
VALUE1 Value associated with data type defined in TYPE1.
N/A N/A C O
TYPE2 Feature data type 2. N/A N/A C O
VALUE2 Value associated with data type defined in TYPE2.
N/A N/A C O
TYPE3 Feature data type 3. N/A N/A C O
VALUE3 Value associated with data type defined in TYPE3.
N/A N/A C O
TYPE4 Feature data type 4. N/A N/A C O
VALUE4 Value associated with data type defined in TYPE4.
N/A N/A C O
VOICE_MAIL_ID Voice mail ID. N/A N/A S O
TRANSACTION_ID Transaction ID returned by NE after MML command is processed.
N/A N/A C O
ASDL_COUNTER ASDL sequence number in CSDL. For internal processing use only.
N/A N/A S O
ASDL Commands
2-80 Product Title/BookTitle as a Variable
MML commands
MML Syntax :
change subscriber-feature-data sub-id=<OLD_SUB_ID>;fname=<OLD_FEATURE_NAME>;active=<OLD_ACTIVE>;type1=<OLD_TYPE1 > ;value1=<OLD_VALUE1>;type2=<OLD_TYPE2 > ; value2=<OLD_VALUE2>;type3=<OLD_TYPE3 > ; value3=<OLD_VALUE3>;type4=<OLD_TYPE4 > ;value4=<OLD_VALUE4>;voice-mail-id=<OLD_VOICE-MAIL-ID>;
Output ParametersTRANSACTION_ID compound parameter
ASDL_COUNTER
A_CSCO-BTS10200_4-4_MOD_SUBSCRIBER-PROFILEModify a subscriber profile. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsSub.modSubscriberProfile.
Table 2–97 A_CSCO-BTS10200_4-4_MOD_SUBSCRIBER-FEATURES-ROLLBACK
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE identifier. N/A N/A S R
OLD_SUB_ID Subscriber ID. N/A N/A S R
OLD_FEATURE_NAME
Feature name. N/A N/A C R
OLD_ACTIVE Specifies if the old sub ID is activated. N/A N/A C O
OLD_TYPE1 Old feature data type 1. N/A N/A C O
OLD_VALUE1 Old value associated with data type defined in TYPE1.
N/A N/A C O
OLD_TYPE2 Old feature data type 2. N/A N/A C O
OLD_VALUE2 Old value associated with data type defined in TYPE2.
N/A N/A C O
OLD_TYPE3 Old feature data type 3. N/A N/A C O
OLD_VALUE3 Old value associated with data type defined in TYPE3.
N/A N/A C O
OLD_TYPE4 Old feature data type 4. N/A N/A C O
OLD_VALUE4 Old value associated with data type defined in TYPE4.
N/A N/A C O
OLD_VOICE_MAIL_ID
Old voice mail ID. N/A N/A S O
TRANSACTION_ID Transaction ID returned by NE after MML command is processed.
N/A N/A C O
ASDL_COUNTER ASDL sequence number in CSDL. For internal processing use only.
N/A N/A S O
ASDL Commands
Atomic Service Description Layer (ASDL) Commands 2-81
MML commands
MML Syntax :
change subscriber-profile id=<SUB_PROFILE_ID>;dial-plan-id=<DIAL_PLAN_ID>;pop-id=<POP_ID>;cos-restrict-id=<COS_RESTRICT_ID>;digit-map-id=<DIGIT_MAP_ID>;ea-use-pic1=<EA_USE_PIC1> interlata-pfx1-opt=<INTERLATA_PFX1_OPT> ;local-pfx1-opt=<LOCAL_PFX1_OPT>;lsa=<LOCAL_SERVICE_AREA>;oli=<ORIG_LINE_INFO>;privacy-manager-id=<PRIVACY_MANAGER_ID>;policy-server-id=<POLICY_SERVER_ID>;qos-id=<QOS_ID>;region=<REGION>;service-id=<SERVICE_ID>;test-line-type=<TEST_LINE_TYPE> ;toll-pfx1-opt=<TOLL_PFX1_OPT>;
Output ParametersTRANSACTION_ID compound parameter
ASDL_COUNTER
Table 2–98 A_CSCO-BTS10200_4-4_MOD_SUBSCRIBER-PROFILE
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE identifier. N/A N/A S R
SUB_PROFILE_ID Subscriber profile ID. N/A N/A S R
DIAL_PLAN_ID Dial plan profile ID. N/A N/A S R
POP_ID Point of presence (POP) ID. N/A N/A S R
COS_RESTRICT_ID Class of service restriction ID. N/A N/A S O
DIGIT_MAP_ID Digit map ID. N/A N/A S O
EA_USE_PIC1 Route to PIC1. N/A N/A S O
INTERLATA_PFX1_OPT
InterLATA call. N/A N/A S O
LOCAL_PFX1_OPT Prefix options for a local call. N/A N/A S O
LOCAL_SERVICE_AREA
Local service area. N/A N/A S O
ORIG_LINE_INFO Originating line information. N/A N/A S O
PRIVACY_MANAGER_ID
Privacy manager ID. N/A N/A S O
POLICY_SERVER_ID Policy server ID. N/A N/A S O
QOS_ID QOS index. N/A N/A S O
REGION Subscriber profile region. N/A N/A S O
SERVICE_ID Service ID. N/A N/A S O
TEST_LINE_TYPE Type of test line. N/A N/A S O
TOLL_PFX1_OPT Prefix options for a intraLATA toll. N/A N/A S O
TRANSACTION_ID Transaction ID returned by NE after MML command is processed.
N/A N/A C O
ASDL_COUNTER ASDL sequence number in CSDL. For internal processing use only.
N/A N/A S O
ASDL Commands
2-82 Product Title/BookTitle as a Variable
A_CSCO-BTS10200_4-4_MOD_SUBSCRIBER-PROFILE-ROLLBACKModify a subscriber profile. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsSub.modSubscriberProfileRollback.
MML commands
MML Syntax :
change subscriber-profile id=<OLD_SUB_PROFILE_ID>;dial-plan-id=<OLD_DIAL_PLAN_ID>;pop-id=<OLD_POP_ID>;cos-restrict-id=<OLD_COS_RESTRICT_ID>;digit-map-id=<OLD_DIGIT_MAP_ID>;
Table 2–99 A_CSCO-BTS10200_4-4_MOD_SUBSCRIBER-PROFILE-ROLLBACK
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE identifier. N/A N/A S R
OLD_SUB_PROFILE_ID
Subscriber profile ID. N/A N/A S R
OLD_DIAL_PLAN_ID Dial plan profile ID. N/A N/A S R
OLD_POP_ID Point of presence (POP) ID. N/A N/A S R
OLD_COS_RESTRICT_ID
Class of service restriction ID. N/A N/A S O
OLD_DIGIT_MAP_ID Digit map ID. N/A N/A S O
OLD_EA_USE_PIC1 Route to PIC1. N/A N/A S O
OLD_INTERLATA_PFX1_OPT
InterLATA call. N/A N/A S O
OLD_LOCAL_PFX1_OPT
Prefix options for a local call. N/A N/A S O
OLD_LOCAL_SERVICE_AREA
Local service area. N/A N/A S O
OLD_ORIG_LINE_INFO
Originating line information. N/A N/A S O
OLD_PRIVACY_MANAGER_ID
Privacy manager ID. N/A N/A S O
OLD_POLICY_SERVER_ID
Policy server ID. N/A N/A S O
OLD_QOS_ID QOS index. N/A N/A S O
OLD_REGION Subscriber profile region. N/A N/A S O
OLD_SERVICE_ID Service ID. N/A N/A S O
OLD_TEST_LINE_TYPE
Type of test line. N/A N/A S O
OLD_TOLL_PFX1_OPT
Prefix options for a intraLATA toll. N/A N/A S O
TRANSACTION_ID Transaction ID returned by NE after MML command is processed.
N/A N/A C O
ASDL_COUNTER ASDL sequence number in CSDL. For internal processing use only.
N/A N/A S O
ASDL Commands
Atomic Service Description Layer (ASDL) Commands 2-83
ea-use-pic1=<OLD_EA_USE_PIC1> interlata-pfx1-opt=<OLD_INTERLATA_PFX1_OPT> ;local-pfx1-opt=<OLD_LOCAL_PFX1_OPT>;lsa=<OLD_LOCAL_SERVICE_AREA>;oli=<OLD_ORIG_LINE_INFO>;privacy-manager-id=<OLD_PRIVACY_MANAGER_ID>;policy-server-id=<OLD_POLICY_SERVER_ID>;qos-id=<OLD_QOS_ID>;region=<OLD_REGION>;service-id=<OLD_SERVICE_ID>;test-line-type=<OLD_TEST_LINE_TYPE> ;toll-pfx1-opt=<OLD_TOLL_PFX1_OPT>;
Output ParametersTRANSACTION_ID compound parameter
ASDL_COUNTER
A_CSCO-BTS10200_4-4_MOD_SUBSCRIBER-ROLLBACKModify a subscriber. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsSub.modSubscriberRollback.
Table 2–100 A_CSCO-BTS10200_4-4_MOD_SUBSCRIBER-ROLLBACK
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE identifier. N/A N/A S R
OLD_ID Subscriber ID. N/A N/A S R
OLD_ADDRESS1 Address of the subscriber. N/A N/A S O
OLD_ADDRESS2 Address of the subscriber. N/A N/A S O
OLD_AOR_ID Address of the record ID. N/A N/A S O
OLD_BILLING_DN Billing DN. N/A N/A S O
OLD_BILLING_TYPE Subscriber billing type. N/A N/A S O
OLD_CATEGORY Subscriber category. N/A N/A S O
OLD_CITY City of the subscriber. N/A N/A S O
OLD_COS_RESTRICT_ID
COS restriction ID. N/A N/A S O
OLD_COUNTRY Country of the subscriber. N/A N/A S O
OLD_CTXG_ID ID in Centrex Group table. N/A N/A S O
OLD_DN1 Subscriber directory number (DN). N/A N/A S O
OLD_GROUP Group. N/A N/A S O
OLD_H323_TERM_ID The termination ID for an H323 terminal.
N/A N/A S O
OLD_IMMEDIATE_RELEASE
Immediate release procedure. N/A N/A S O
OLD_LANGUAGE Subscriber's preferred spoken language. N/A N/A S O
OLD_MAC_ID MAC ID for the subscriber. N/A N/A S O
OLD_MGW_ID Media gateway ID. N/A N/A S O
OLD_MLHG_ID Multiline Hunt Group ID. N/A N/A S O
OLD_MLHG_PREF_LIST_ID
MLGH preference list ID. N/A N/A S O
ASDL Commands
2-84 Product Title/BookTitle as a Variable
MML commands
MML Syntax :
change subscriber id=<OLD_ID>;address1=<OLD_ADDRESS1>;address2=<OLD_ADDRESS2>;aor-id=<OLD_AOR_ID>;billing-dn=<OLD_BILLING_DN>;billingtype=<OLD_BILLING_TYPE>;
OLD_MWI_ON Message waiting indicator on status. N/A N/A S O
OLD_NAME Subscriber name. N/A N/A S O
OLD_PIC1 Preferred interLATA carrier (PIC). N/A N/A S O
OLD_PIC2 Preferred interLATA carrier (PIC) 2. N/A N/A S O
OLD_PIC3 Preferred interLATA carrier (PIC) 3. N/A N/A S O
OLD_POLICY_ID Policy ID. N/A N/A S O
OLD_PORTED_IN Permitted values are: Y/N. N/A N/A S O
OLD_PRIVACY Privacy. N/A N/A S O
OLD_PRIVACY_MANAGER_ID
Privacy manager ID. N/A N/A S O
OLD_QOS_ID QOS index. N/A N/A S O
OLD_RING_TYPE_DN1
Ring type for DN1. N/A N/A S O
OLD_SEND_BDN_AS_CPN
Send the billing DN of the subscriber as a CPN.
N/A N/A S O
OLD_SEND_BDN_FOREMG
Send the billing. N/A N/A S O
OLD_STATE State designation. N/A N/A S O
OLD_SUB_STATUS Indicates the subscriber status. N/A N/A S O
OLD_SUB_PROFILE_ID
Subscriber profile ID. N/A N/A S O
OLD_TERM_ID Termination ID. N/A N/A S O
OLD_TERMINATING_IMMEDIATE_REL
Terminating immediate release. N/A N/A S O
OLD_TERM_TYPE Termination type. N/A N/A S O
OLD_TRUNK_GROUP_ID
Trunk group ID. N/A N/A S O
OLD_USAGE_SENSITIVE_FEATURE
Usage sensitive features. N/A N/A S O
OLD_VOICE_MAIL_ID
Voice mail ID. N/A N/A S O
OLD_ZIPCODE Subscriber's zip code. N/A N/A S O
TRANSACTION_ID Transaction ID returned by NE after MML command is processed.
N/A N/A C O
ASDL_COUNTER ASDL sequence number in CSDL. For internal processing use only.
N/A N/A S O
Table 2–100 (Cont.) A_CSCO-BTS10200_4-4_MOD_SUBSCRIBER-ROLLBACK
Parameter Name Description RangeDefault Value Type Class
ASDL Commands
Atomic Service Description Layer (ASDL) Commands 2-85
category=<OLD_CATEGORY>;city=<OLD_CITY>;cosrestrict-id=<OLD_COS_RESTRICT_ID>;country=<OLD_COUNTRY>;ctxg-id=<OLD_CTXG_ID>;dn1=<OLD_DN1>;grp=<OLD_GROUP>;h323-termid=<OLD_H323_TERM_ID>;immediate-release=<OLD_IMMEDIATE_RELEASE >;language=<OLD_LANGUAGE > ;mac-id=<OLD_MAC_ID>;mgw-id=<OLD_MGW_ID>;mlhgid=<OLD_MLHG_ID>;mlhg-pref-list-id=<OLD_MLHG_PREF_LIST_ID>;mwion=<OLD_MWI_ON>;name=<OLD_NAME>;pic1=<OLD_PIC1>;pic2=<OLD_PIC2>;pic3=<OLD_PIC3>;policy-id=<OLD_POLICY_ID >;ported-in=<OLD_PORTED_IN>;privacy=<OLD_PRIVACY>;privacy-manager-id=<OLD_PRIVACY_MANAGER_ID >;qosid=<OLD_QOS_ID>;ring-type-dn1=<OLD_RING_TYPE_DN1>;send-bdn-ascpn=<OLD_SEND_BDN_AS_CPN>;send-bdn-for-emg=<OLD_SEND_BDN_FOREMG>;sendbilling-dn=<OLD_SEND_BILLING_DN>;state=<OLD_STATE>;status=<OLD_STATUS>;subprofile-id=<OLD_SUB_PROFILE_ID>;term-id=<OLD_TERM_ID>;terminating-immediaterel=<OLD_TERMINATING_IMMEDIATE_REL>;term-type=<OLD_TERM_TYPE>;tgnid=<OLD_TRUNK_GROUP_ID>;usage-sens=<OLD_USAGE_SENSITIVE_FEATURE>;voice-mailid=<OLD_VOICE_MAIL_ID>;zipcode=<OLD_ZIPCODE>;
Output ParametersTRANSACTION_ID compound parameter
ASDL_COUNTER
A_CSCO-BTS10200_4-4_MOD_SUBSCRIBER-SERVICE-PROFILEModify a subscriber service profile. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsSub.modSubscriberServiceProfile.
MML commands
MML Syntax :
change subscriber-service-profile sub-id=<SUB_ID>;service-id=<SERVICE_ID> ;
Output ParametersTRANSACTION_ID compound parameter
ASDL_COUNTER
Table 2–101 A_CSCO-BTS10200_4-4_MOD_SUBSCRIBER-SERVICE-PROFILE
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE identifier. N/A N/A S R
SUB_ID Subscriber ID. N/A N/A S R
SERVICE_ID Service ID. N/A N/A C R
TRANSACTION_ID Transaction ID returned by NE after MML command is processed.
N/A N/A C O
ASDL_COUNTER ASDL sequence number in CSDL. For internal processing use only.
N/A N/A S O
ASDL Commands
2-86 Product Title/BookTitle as a Variable
A_CSCO-BTS10200_4-4_MOD_SUBSCRIBER-SERVICE-PROFILE-ROLLBACKRollback modify a subscriber service profile. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsSub.modSubscriberServiceProfileRollback.
MML commands
MML Syntax :
change subscriber-service-profile sub-id=<OLD_SUB_ID>;service-id=<OLD_SERVICE_ID>;
Output ParametersTRANSACTION_ID compound parameter
ASDL_COUNTER
A_CSCO-BTS10200_4-4_MOD_SUBSCRIBER-TIME-OF-DAYModify a subscriber time of day. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsSub.modSubscriberTimeOfDay.
Table 2–102 A_CSCO-BTS10200_4-4_MOD_SUBSCRIBER-SERVICE-PROFILE-ROLLBACK
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE identifier. N/A N/A S R
OLD_SUB_ID Subscriber ID. N/A N/A S R
OLD_SERVICE_ID Service ID. N/A N/A C R
TRANSACTION_ID Transaction ID returned by NE after MML command is processed.
N/A N/A C O
ASDL_COUNTER ASDL sequence number in CSDL. For internal processing use only.
N/A N/A S O
Table 2–103 A_CSCO-BTS10200_4-4_MOD_SUBSCRIBER-TIME-OF-DAY
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE identifier. N/A N/A S R
SUB_ID Subscriber ID N/A N/A S R
FEATURE_NAME Feature Name N/A N/A S R
ACTION Action of Subscriber N/A N/A S O
DOY1 Month and day. N/A N/A S O
DOY2 Month and day. N/A N/A S O
DOY3 Month and day. N/A N/A S O
DOY4 Month and day. N/A N/A S O
DOY5 Month and day. N/A N/A S O
DOY6 Month and day. N/A N/A S O
DOY7 Month and day. N/A N/A S O
ASDL Commands
Atomic Service Description Layer (ASDL) Commands 2-87
DOY8 Month and day. N/A N/A S O
DOY9 Month and day. N/A N/A S O
DOY10 Month and day. N/A N/A S O
START_DOW1 Day of week. N/A N/A S O
START_DOW2 Day of week. N/A N/A S O
START_DOW3 Day of week. N/A N/A S O
START_DOW4 Day of week. N/A N/A S O
START_DOW5 Day of week. N/A N/A S O
START_DOW6 Day of week. N/A N/A S O
START_DOW7 Day of week. N/A N/A S O
START_DOW8 Day of week. N/A N/A S O
START_DOW9 Day of week. N/A N/A S O
START_DOW10 Day of week. N/A N/A S O
STOP_DOW1 Day of week that this policy ends. N/A N/A S O
STOP_DOW2 Day of week that this policy ends. N/A N/A S O
STOP_DOW3 Day of week that this policy ends. N/A N/A S O
STOP_DOW4 Day of week that this policy ends. N/A N/A S O
STOP_DOW5 Day of week that this policy ends. N/A N/A S O
STOP_DOW6 Day of week that this policy ends. N/A N/A S O
STOP_DOW7 Day of week that this policy ends. N/A N/A S O
STOP_DOW8 Day of week that this policy ends. N/A N/A S O
STOP_DOW9 Day of week that this policy ends. N/A N/A S O
STOP_DOW10 Day of week that this policy ends. N/A N/A S O
START_TIME1 Start time. N/A N/A S O
START_TIME2 Start time. N/A N/A S O
START_TIME3 Start time. N/A N/A S O
START_TIME4 Start time. N/A N/A S O
START_TIME5 Start time. N/A N/A S O
START_TIME6 Start time. N/A N/A S O
START_TIME7 Start time. N/A N/A S O
START_TIME8 Start time. N/A N/A S O
START_TIME9 Start time. N/A N/A S O
START_TIME10 Start time. N/A N/A S O
STOP_TIME1 Stop time. N/A N/A S O
STOP_TIME2 Stop time. N/A N/A S O
STOP_TIME3 Stop time. N/A N/A S O
Table 2–103 (Cont.) A_CSCO-BTS10200_4-4_MOD_SUBSCRIBER-TIME-OF-DAY
Parameter Name Description RangeDefault Value Type Class
ASDL Commands
2-88 Product Title/BookTitle as a Variable
MML commands
MML Syntax :
change subscriber-tod-schedule sub-id=<SUB_ID>;fname=<FEATURE_NAME>;action=<ACTION>;doy1=<DOY1>;doy2=<DOY2>;doy3=<DOY3>;doy4=<DOY4>;doy5=<DOY5>;doy6=<DOY6>;doy7=<DOY7>;doy8=<DOY8>;doy9< DOY9>;doy10=<DOY10>;startdow1=<START_DOW1>;start-dow2=<START_DOW2>;startdow3=<START_DOW3>;start-dow4=<START_DOW4>;startdow5=<START_DOW5>;start-dow6=<START_DOW6>;startdow7=<START_DOW7>;start-dow8=<START_DOW8>;startdow9=<START_DOW9>;start-dow10=<START_DOW10>;stopdow1=<STOP_DOW1>;stop-dow2=<STOP_DOW2>;stopdow3=<STOP_DOW3>;stop-dow4=<STOP_DOW4>;stopdow5=<STOP_DOW5>;stop-dow6=<STOP_DOW6>;stopdow7=<STOP_DOW7>;stop-dow8=<STOP_DOW8>;stopdow9=<STOP_DOW9>;stop-dow10=<STOP_DOW10>;starttime1=<START_TIME1> ; start-time2=<START_TIME2>; starttime3=<START_TIME3> ; start-time4=<START_TIME4>;starttime5=<START_TIME5> ; start-time6=<START_TIME6>;starttime7=<START_TIME7> ; start-time8=<START_TIME8>;starttime9=<START_TIME9>;start-time1=<START_TIME10>;stoptime1=<STOP_TIME1>;stop-time2=<STOP_TIME2>;stoptime3=<STOP_TIME3>;stop-time4=<STOP_TIME4>;stoptime5=<STOP_TIME5>;stop-time6=<STOP_TIME6>;stoptime7=<STOP_TIME7>;stop-time8=<STOP_TIME8>;stoptime9=<STOP_TIME9>;stop-time10=<STOP_TIME10>;
Output ParametersTRANSACTION_ID compound parameter
ASDL_COUNTER
STOP_TIME4 Stop time. N/A N/A S O
STOP_TIME5 Stop time. N/A N/A S O
STOP_TIME6 Stop time. N/A N/A S O
STOP_TIME7 Stop time. N/A N/A S O
STOP_TIME8 Stop time. N/A N/A S O
STOP_TIME9 Stop time. N/A N/A S O
STOP_TIME10 Stop time. N/A N/A S O
TRANSACTION_ID Transaction ID returned by NE after MML command is processed.
N/A N/A C O
ASDL_COUNTER ASDL sequence number in CSDL. For internal processing use only.
N/A N/A S O
Table 2–103 (Cont.) A_CSCO-BTS10200_4-4_MOD_SUBSCRIBER-TIME-OF-DAY
Parameter Name Description RangeDefault Value Type Class
ASDL Commands
Atomic Service Description Layer (ASDL) Commands 2-89
A_CSCO-BTS10200_4-4_MOD_SUBSCRIBER-TIME-OF-DAY-ROLLBACKModify a subscriber time of day. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsSub.modSubscriberTimeOfDayRollback.
Table 2–104 A_CSCO-BTS10200_4-4_MOD_SUBSCRIBER-TIME-OF-DAY-ROLLBACK
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE identifier. N/A N/A S R
OLD_SUB_ID Subscriber ID. N/A N/A S R
OLD_FEATURE_NAME
Feature name. N/A N/A S R
OLD_ACTION Action of the subscriber. N/A N/A S O
OLD_DOY1 Month and day. N/A N/A S O
OLD_DOY2 Month and day. N/A N/A S O
OLD_DOY3 Month and day. N/A N/A S O
OLD_DOY4 Month and day. N/A N/A S O
OLD_DOY5 Month and day. N/A N/A S O
OLD_DOY6 Month and day. N/A N/A S O
OLD_DOY7 Month and day. N/A N/A S O
OLD_DOY8 Month and day. N/A N/A S O
OLD_DOY9 Month and day. N/A N/A S O
OLD_DOY10 Month and day. N/A N/A S O
OLD_START_DOW1 Day of week. N/A N/A S O
OLD_START_DOW2 Day of week. N/A N/A S O
OLD_START_DOW3 Day of week. N/A N/A S O
OLD_START_DOW4 Day of week. N/A N/A S O
OLD_START_DOW5 Day of week. N/A N/A S O
OLD_START_DOW6 Day of week. N/A N/A S O
OLD_START_DOW7 Day of week. N/A N/A S O
OLD_START_DOW8 Day of week. N/A N/A S O
OLD_START_DOW9 Day of week. N/A N/A S O
OLD_START_DOW10 Day of week. N/A N/A S O
OLD_STOP_DOW1 Day of week that this policy ends. N/A N/A S O
OLD_STOP_DOW2 Day of week that this policy ends. N/A N/A S O
OLD_STOP_DOW3 Day of week that this policy ends. N/A N/A S O
OLD_STOP_DOW4 Day of week that this policy ends. N/A N/A S O
OLD_STOP_DOW5 Day of week that this policy ends. N/A N/A S O
OLD_STOP_DOW6 Day of week that this policy ends. N/A N/A S O
OLD_STOP_DOW7 Day of week that this policy ends. N/A N/A S O
OLD_STOP_DOW8 Day of week that this policy ends. N/A N/A S O
ASDL Commands
2-90 Product Title/BookTitle as a Variable
MML commands
MML Syntax :
change subscriber-tod-schedule sub-id=<OLD_SUB_ID>;fname=<OLD_FEATURE_NAME>;action=<OLD_ACTION>;doy1=<OLD_DOY1>;doy2=<OLD_DOY2>;doy3=<OLD_DOY3>;doy4=<OLD_DOY4>;doy5=<OLD_DOY5>;doy6=<OLD_DOY6>;doy7=<OLD_DOY7>;doy8=<OLD_DOY8>;doy9< OLD_DOY9>;doy10=<OLD_DOY10>;startdow1=<OLD_START_DOW1>;start-dow2=<OLD_START_DOW2>;startdow3=<OLD_START_DOW3>;start-dow4=<OLD_START_DOW4>;startdow5=<OLD_START_DOW5>;start-dow6=<OLD_START_DOW6>;startdow7=<OLD_START_DOW7>;start-dow8=<OLD_START_DOW8>;startdow9=<OLD_START_DOW9>;start-dow10=<OLD_START_DOW10>;stopdow1=<OLD_STOP_DOW1>;stop-dow2=<OLD_STOP_DOW2>;stopdow3=<OLD_STOP_
OLD_STOP_DOW9 Day of week that this policy ends. N/A N/A S O
OLD_STOP_DOW10 Day of week that this policy ends. N/A N/A S O
OLD_START_TIME1 Start time. N/A N/A S O
OLD_START_TIME2 Start time. N/A N/A S O
OLD_START_TIME3 Start time. N/A N/A S O
OLD_START_TIME4 Start time. N/A N/A S O
OLD_START_TIME5 Start time. N/A N/A S O
OLD_START_TIME6 Start time. N/A N/A S O
OLD_START_TIME7 Start time. N/A N/A S O
OLD_START_TIME8 Start time. N/A N/A S O
OLD_START_TIME9 Start time. N/A N/A S O
OLD_START_TIME10 Start time. N/A N/A S O
OLD_STOP_TIME1 Stop time. N/A N/A S O
OLD_STOP_TIME2 Stop time. N/A N/A S O
OLD_STOP_TIME3 Stop time. N/A N/A S O
OLD_STOP_TIME4 Stop time. N/A N/A S O
OLD_STOP_TIME5 Stop time. N/A N/A S O
OLD_STOP_TIME6 Stop time. N/A N/A S O
OLD_STOP_TIME7 Stop time. N/A N/A S O
OLD_STOP_TIME8 Stop time. N/A N/A S O
OLD_STOP_TIME9 Stop time. N/A N/A S O
OLD_STOP_TIME10 Stop time. N/A N/A S O
TRANSACTION_ID Transaction ID returned by NE after MML command is processed.
N/A N/A C O
ASDL_COUNTER ASDL sequence number in CSDL. For internal processing use only.
N/A N/A S O
Table 2–104 (Cont.) A_CSCO-BTS10200_4-4_MOD_SUBSCRIBER-TIME-OF-DAY-ROLLBACK
Parameter Name Description RangeDefault Value Type Class
ASDL Commands
Atomic Service Description Layer (ASDL) Commands 2-91
DOW3>;stop-dow4=<OLD_STOP_DOW4>;stopdow5=<OLD_STOP_DOW5>;stop-dow6=<OLD_STOP_DOW6>;stopdow7=<OLD_STOP_DOW7>;stop-dow8=<OLD_STOP_DOW8>;stopdow9=<OLD_STOP_DOW9>;stop-dow10=<OLD_STOP_DOW10>;starttime1=<OLD_START_TIME1> ; start-time2=<OLD_START_TIME2>; starttime3=<OLD_START_TIME3> ; start-time4=<OLD_START_TIME4>;starttime5=<OLD_START_TIME5> ; start-time6=<OLD_START_TIME6>;starttime7=<OLD_START_TIME7> ; start-time8=<OLD_START_TIME8>;starttime9=<OLD_START_TIME9>;start-time1=<OLD_START_TIME10>;stoptime1=<OLD_STOP_TIME1>;stop-time2=<OLD_STOP_TIME2>;stoptime3=<OLD_STOP_TIME3>;stop-time4=<OLD_STOP_TIME4>;stoptime5=<OLD_STOP_TIME5>;stop-time6=<OLD_STOP_TIME6>;stoptime7=<OLD_STOP_TIME7>;stop-time8=<OLD_STOP_TIME8>;stoptime9=<OLD_STOP_TIME9>;stop-time10=<OLD_STOP_TIME10>;
Output ParametersTRANSACTION_ID compound parameter
ASDL_COUNTER
A_CSCO-BTS10200_4-4_MOD_TERMINATIONModify a termination. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsMgw.modTermination.
MML commands
MML Syntax :
change termination id=<TERMINATION-ID>; mgw-id=<MGW_ID>; type=<TERM_TYPE>; operstatus=<TERM_OPER_STATUS>; tg=<TG>;
Output ParametersTRANSACTION_ID compound parameter
ASDL_COUNTER
Table 2–105 A_CSCO-BTS10200_4-4_MOD_TERMINATION
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE Identifier N/A N/A S R
TERMINATION_ID The termination identifier. N/A N/A S R
MGW_ID ID of the media gateway(1-32 ASCII characters).
N/A N/A S R
TERM_TYPE Port number end N/A N/A S O
TERM_OPER_STATUS Termination type. N/A N/A S O
TG Trunk group ID. N/A N/A S O
ASDL_COUNTER ASDL sequence counter in CSDL. For internal processing use only.
N/A N/A S O
TRANSACTION_ID Transaction ID returned by NE after processing MML command.
N/A N/A C O
ASDL Commands
2-92 Product Title/BookTitle as a Variable
A_CSCO-BTS10200_4-4_MOD_TERMINATION-ROLLBACKRollback a modified termination. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsMgw.modTerminationRollback.
MML commands
MML Syntax :
change termination id=<OLD_TERMINATION_ID>; mgw-id=<OLD_MGW_ID>; type=<OLD_TERM_TYPE>; operstatus=<OLD_TERM_OPER_STATUS>; status=<STATUS>; tgn-id=<OLD_TG>;
Output ParametersTRANSACTION_ID compound parameter
ASDL_COUNTER
A_CSCO-BTS10200_4-4_MOD_TWO-DIGIT-SPEED-CALLModify a speed call two digit. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsSub.modTwoDigitSpeedCall.
Table 2–106 A_CSCO-BTS10200_4-4_MOD_TERMINATION-ROLLBACK
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE Identifier N/A N/A S R
OLD_TERMINATION_ID
The termination identifier. N/A N/A S R
OLD_MGW_ID ID of the media gateway(1-32 ASCII characters).
N/A N/A S R
OLD_TERM_TYPE Port number end N/A N/A S O
OLD_TERM_OPER_STATUS
Termination type. N/A N/A S O
OLD_TG Trunk group ID. N/A N/A S O
ASDL_COUNTER ASDL sequence counter in CSDL. For internal processing use only.
N/A N/A S O
TRANSACTION_ID Transaction ID returned by NE after processing MML command.
N/A N/A C O
Table 2–107 A_CSCO-BTS10200_4-4_MOD_TWO-DIGIT-SPEED-CALL
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE identifier. N/A N/A S R
SUB_ID Subscriber ID. N/A N/A S R
DN20 Directory number. N/A N/A S O
DN21 Directory number. N/A N/A S O
DN22 Directory number. N/A N/A S O
ASDL Commands
Atomic Service Description Layer (ASDL) Commands 2-93
MML commands
MML Syntax :
change sc2d sub-id=<SUB_ID>;dn20=<DN20>;dn21=<DN21>;dn22=<DN22>;dn23=<DN23>;dn24=<DN24>;dn25=<DN25>;dn26=<DN26>;dn27=<DN27>;dn28=<DN28>;dn29=<DN29>;dn30=<DN30>;dn31=<DN31>;dn32=<DN32>;dn33=<DN33>;dn34=<DN34>;dn35=<DN35>;dn36=<DN36>;dn37=<DN37>;dn38=<DN38>;dn39=<DN39>;dn40=<DN40>;
DN23 Directory number. N/A N/A S O
DN24 Directory number. N/A N/A S O
DN25 Directory number. N/A N/A S O
DN26 Directory number. N/A N/A S O
DN27 Directory number. N/A N/A S O
DN28 Directory number. N/A N/A S O
DN29 Directory number. N/A N/A S O
DN30 Directory number. N/A N/A S O
DN31 Directory number. N/A N/A S O
DN32 Directory number. N/A N/A S O
DN33 Directory number. N/A N/A S O
DN34 Directory number. N/A N/A S O
DN35 Directory number. N/A N/A S O
DN36 Directory number. N/A N/A S O
DN37 Directory number. N/A N/A S O
DN38 Directory number. N/A N/A S O
DN39 Directory number. N/A N/A S O
DN40 Directory number. N/A N/A S O
DN41 Directory number. N/A N/A S O
DN42 Directory number. N/A N/A S O
DN43 Directory number. N/A N/A S O
DN44 Directory number. N/A N/A S O
DN45 Directory number. N/A N/A S O
DN46 Directory number. N/A N/A S O
DN47 Directory number. N/A N/A S O
DN48 Directory number. N/A N/A S O
DN49 Directory number. N/A N/A S O
TRANSACTION_ID Transaction ID returned by NE after MML command is processed.
N/A N/A C O
ASDL_COUNTER ASDL sequence number in CSDL. For internal processing use only.
N/A N/A S O
Table 2–107 (Cont.) A_CSCO-BTS10200_4-4_MOD_TWO-DIGIT-SPEED-CALL
Parameter Name Description RangeDefault Value Type Class
ASDL Commands
2-94 Product Title/BookTitle as a Variable
dn41=<DN41>;dn42=<DN42>;dn43=<DN43>;dn44=<DN44>;dn45=<DN45>;dn46=<DN46>;dn47=<DN47>;dn48=<DN48>;dn49=<DN49>;
Output ParametersTRANSACTION_ID compound parameter
ASDL_COUNTER
A_CSCO-BTS10200_4-4_MOD_TWO-DIGIT-SPEED-CALL-ROLLBACKModify a speed call two digit. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsSub.modTwoDigitSpeedCallRollback.
Table 2–108 A_CSCO-BTS10200_4-4_MOD_TWO-DIGIT-SPEED-CALL-ROLLBACK
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE identifier. N/A N/A S R
OLD_SUB_ID Subscriber ID. N/A N/A S R
OLD_DN20 Directory number. N/A N/A S O
OLD_DN21 Directory number. N/A N/A S O
OLD_DN22 Directory number. N/A N/A S O
OLD_DN23 Directory number. N/A N/A S O
OLD_DN24 Directory number. N/A N/A S O
OLD_DN25 Directory number. N/A N/A S O
OLD_DN26 Directory number. N/A N/A S O
OLD_DN27 Directory number. N/A N/A S O
OLD_DN28 Directory number. N/A N/A S O
OLD_DN29 Directory number. N/A N/A S O
OLD_DN30 Directory number. N/A N/A S O
OLD_DN31 Directory number. N/A N/A S O
OLD_DN32 Directory number. N/A N/A S O
OLD_DN33 Directory number. N/A N/A S O
OLD_DN34 Directory number. N/A N/A S O
OLD_DN35 Directory number. N/A N/A S O
OLD_DN36 Directory number. N/A N/A S O
OLD_DN37 Directory number. N/A N/A S O
OLD_DN38 Directory number. N/A N/A S O
OLD_DN39 Directory number. N/A N/A S O
OLD_DN40 Directory number. N/A N/A S O
OLD_DN41 Directory number. N/A N/A S O
OLD_DN42 Directory number. N/A N/A S O
OLD_DN43 Directory number. N/A N/A S O
OLD_DN44 Directory number. N/A N/A S O
ASDL Commands
Atomic Service Description Layer (ASDL) Commands 2-95
MML commands
MML Syntax :
change sc2d sub-id=<OLD_SUB_ID>;dn20=<OLD_DN20>;dn21=<OLD_DN21>;dn22=<OLD_DN22>;dn23=<OLD_DN23>;dn24=<OLD_DN24>;dn25=<OLD_DN25>;dn26=<OLD_DN26>;dn27=<OLD_DN27>;dn28=<OLD_DN28>;dn29=<OLD_DN29>;dn30=<OLD_DN30>;dn31=<OLD_DN31>;dn32=<OLD_DN32>;dn33=<OLD_DN33>;dn34=<OLD_DN34>;dn35=<OLD_DN35>;dn36=<OLD_DN36>;dn37=<OLD_DN37>;dn38=<OLD_DN38>;dn39=<OLD_DN39>;dn40=<OLD_DN40>;dn41=<OLD_DN41>;dn42=<OLD_DN42>;dn43=<OLD_DN43>;dn44=<OLD_DN44>;dn45=<OLD_DN45>;dn46=<OLD_DN46>;dn47=<OLD_DN47>;dn48=<OLD_DN48>;dn49=<OLD_DN49>;
Output ParametersTRANSACTION_ID compound parameter
ASDL_COUNTER
A_CSCO-BTS10200_4-4_MOD_USER-AUTHENTICATIONModify a user authentication. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsSip.modUserAuthentication.
OLD_DN45 Directory number. N/A N/A S O
OLD_DN46 Directory number. N/A N/A S O
OLD_DN47 Directory number. N/A N/A S O
OLD_DN48 Directory number. N/A N/A S O
OLD_DN49 Directory number. N/A N/A S O
TRANSACTION_ID Transaction ID returned by NE after MML command is processed.
N/A N/A C O
ASDL_COUNTER ASDL sequence number in CSDL. For internal processing use only.
N/A N/A S O
Table 2–109 A_CSCO-BTS10200_4-4_MOD_USER-AUTHENTICATION
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE Identifier N/A N/A S R
AUTH_USER authentication user name. N/A N/A S R
AUTH_REALM_ID authentication realm id N/A N/A S O
USER_AUTH_PASSWORD
password for this auth-user. N/A N/A S O
AOR_ID Address of record id N/A N/A S O
ASDL_COUNTER ASDL sequence counter in CSDL. For internal processing use only.
N/A N/A S O
TRANSACTION_ID Transaction ID returned by NE after processing MML command.
N/A N/A C O
Table 2–108 (Cont.) A_CSCO-BTS10200_4-4_MOD_TWO-DIGIT-SPEED-CALL-ROLLBACK
Parameter Name Description RangeDefault Value Type Class
ASDL Commands
2-96 Product Title/BookTitle as a Variable
MML commands
MML Syntax :
change user-auth auth-user=<AUTH_USER>;auth-realm-id=<AUTH_REALM_ID>;password=<PASSWORD>;aor-id=<AOR_ID>;
Output ParametersTRANSACTION_ID compound parameter
ASDL_COUNTER
A_CSCO-BTS10200_4-4_MOD_USER-AUTHENTICATION-ROLLBACKModify a user authentication. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsSip.modUserAuthenticationRollback.
MML commands
MML Syntax :
change user-auth auth-user=<OLD_AUTH_USER>;auth-realm-id=<OLD_AUTH_REALM_ID>;password=<OLD_PASSWORD>;aor-id=<OLD_AOR_ID>;
Output ParametersTRANSACTION_ID compound parameter
ASDL_COUNTER
A_CSCO-BTS10200_4-4_QRY_AOR-TO-SUBSCRIBERQuery address of record to subscriber. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsSip.qryAorToSubscriber.
Table 2–110 A_CSCO-BTS10200_4-4_MOD_USER-AUTHENTICATION-ROLLBACK
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE Identifier N/A N/A S R
OLD_AUTH_USER authentication user name. N/A N/A S R
OLD_AUTH_REALM_ID
authentication realm id N/A N/A S O
OLD_USER_AUTH_PASSWORD
password for this auth-user. N/A N/A S O
OLD_AOR_ID Address of record id N/A N/A S O
ASDL_COUNTER ASDL sequence counter in CSDL. For internal processing use only.
N/A N/A S O
TRANSACTION_ID Transaction ID returned by NE after processing MML command.
N/A N/A C O
ASDL Commands
Atomic Service Description Layer (ASDL) Commands 2-97
MML commands
MML Syntax :
show aor2sub aor-id==<AOR_ID>;
Output ParametersReturns the following as INFO parameters:
AOR_ID[++]
SUB_ID[++]
STATUS[++]
Reply : Success: Entries 1of 1 returned.
(OR)
Reply : Success: Database is void of entries. Where index starts from 1 to any number.
A_CSCO-BTS10200_4-4_QRY_AOR-TO-SUBSCRIBER-ROLLBACKQuery address of record to subscriber and return OLD_ parameters. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsSip.qryAorToSubscriberRollback.
MML commands
MML Syntax :
show aor2sub aor-id==<AOR_ID>;
Output ParametersReturns the following as Rollback and CSDL parameters:
Table 2–111 A_CSCO-BTS10200_4-4_QRY_AOR-TO-SUBSCRIBER
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE Identifier N/A N/A S R
SUB_ID Subscriber ID N/A N/A S O
AOR_ID Address of record id for the subscriber. N/A N/A S O
Table 2–112 A_CSCO-BTS10200_4-4_QRY_AOR-TO-SUBSCRIBER-ROLLBACK
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE Identifier N/A N/A S R
SUB_ID Subscriber ID N/A N/A S O
AOR_ID Address of record id for the subscriber. N/A N/A S O
ASDL Commands
2-98 Product Title/BookTitle as a Variable
AOR_ID[++]
SUB_ID[++]
STATUS[++]
Reply : Success: Entries 1of 1 returned.
(OR)
Reply : Success: Database is void of entries. Where index starts from 1 to any number.
A_CSCO-BTS10200_4-4_QRY_AUTHORIZATION-CODEQuery an authorization code. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsSub.qryAuthorizationCode.
MML commands
MML Syntax :
show auth-code id=<AUTH_ID>;auth-code-grp-id=<AUTH_CODE_GROUP_ID>;
Output ParametersReturns the following as INFO parameters:
ID
CATEGORY
NAME
STATUS
BILLING_DN
DN1
PRIVACY
RING_TYPE_DN1
CTXG_ID
TERM_ID
MGW_ID
PIC1
PIC2
Table 2–113 A_CSCO-BTS10200_4-4_QRY_AUTHORIZATION-CODE
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE identifier. N/A N/A S R
AUTH_ID Dialed authorization code. N/A N/A S R
AUTH_CODE_GROUP_ID
Authorization code group ID. N/A N/A S R
ASDL Commands
Atomic Service Description Layer (ASDL) Commands 2-99
PIC3
GRP
USAGE_SENS
SUB_PROFILE_ID
TERM_TYPE
IMMEDIATE_RELEASE
TERMINATING_IMMEDIATE_REL
SEND_BILLING_DN
Reply : Success: Entries 1of 1 returned.
(OR)
Reply : Success: Database is void of entries.
A_CSCO-BTS10200_4-4_QRY_AUTHORIZATION-CODE-GROUPQuery an authorization code group. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsSub.qryAuthorizationCodeGroup.
MML commands
MML Syntax :
show auth-code-grp id=<AUTH_CODE_GROUP_ID>;
Output ParametersNone.
A_CSCO-BTS10200_4-4_QRY_AUTHORIZATION-CODE-GROUP-ROLLBACKQuery an authorization code group and return OLD_ parameters. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsSub.qryAuthorizationCodeGroupRollback.
Table 2–114 A_CSCO-BTS10200_4-4_QRY_AUTHORIZATION-CODE-GROUP
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE identifier. N/A N/A S R
AUTH_CODE_GROUP_ID
Authorization code group ID. N/A N/A S R
Table 2–115 A_CSCO-BTS10200_4-4_QRY_AUTHORIZATION-CODE-GROUP-ROLLBACK
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE identifier. N/A N/A S R
AUTH_CODE_GROUP_ID
Authorization code group ID. N/A N/A S R
ASDL Commands
2-100 Product Title/BookTitle as a Variable
MML commands
MML Syntax :
show auth-code-grp id=<AUTH_CODE_GROUP_ID>;
Output ParametersNone.
A_CSCO-BTS10200_4-4_QRY_AUTHORIZATION-CODE-ROLLBACKQuery an authorization code returns OLD_ paramaters. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsSub.qryAuthorizationCodeRollback.
MML commands
MML Syntax :
show auth-code id=<AUTH_ID>;auth-code-grp-id=<AUTH_CODE_GROUP_ID>;
Output ParametersReturns the following as Rollback and CSDL parameters:
ID
CATEGORY
NAME
STATUS
BILLING_DN
DN1
PRIVACY
RING_TYPE_DN1
CTXG_ID
TERM_ID
MGW_ID
PIC1
PIC2
Table 2–116 A_CSCO-BTS10200_4-4_QRY_AUTHORIZATION-CODE-ROLLBACK
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE identifier. N/A N/A S R
AUTH_ID Dialed authorization code. N/A N/A S R
AUTH_CODE_GROUP_ID
Authorization code group ID. N/A N/A S R
ASDL Commands
Atomic Service Description Layer (ASDL) Commands 2-101
PIC3
GRP
USAGE_SENS
SUB_PROFILE_ID
TERM_TYPE
IMMEDIATE_RELEASE
TERMINATING_IMMEDIATE_REL
SEND_BILLING_DN
Reply : Success: Entries 1of 1 returned.
(OR)
Reply : Success: Database is void of entries.
A_CSCO-BTS10200_4-4_QRY_CASUAL-WB-LISTQuery a casual white black list. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsSub.qryCasualWbList.
MML commands
MML Syntax :
show casual-wb-list cos-restrict-id=<COS_RESTRICT_ID>;carrier =<CARRIER>;
Output ParametersNone.
A_CSCO-BTS10200_4-4_QRY_CASUAL-WB-LIST-ROLLBACKQuery a casual white black list and return OLD_ parameters. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsSub.qryCasualWbListRollback.
Table 2–117 A_CSCO-BTS10200_4-4_QRY_CASUAL-WB-LIST
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE Identifier. N/A N/A S R
COS_RESTRICT_ID Class of service restriction ID. N/A N/A S R
CARRIER Carrier Identification Code (CIC). N/A N/A S R
Table 2–118 A_CSCO-BTS10200_4-4_QRY_CASUAL-WB-LIST-ROLLBACK
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE Identifier. N/A N/A S R
COS_RESTRICT_ID Class of service restriction ID. N/A N/A S R
CARRIER Carrier Identification Code (CIC). N/A N/A S R
ASDL Commands
2-102 Product Title/BookTitle as a Variable
MML commands
MML Syntax :
show casual-wb-list cos-restrict-id=<COS_RESTRICT_ID>;carrier =<CARRIER>;
Output ParametersNone
A_CSCO-BTS10200_4-4_QRY_CHANGED-NUMBERQuery a changed number. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsSub.qryChangednumber.
MML commands
MML Syntax :
show changed-number old-dn=<OLD_DN>;
Output ParametersReturns the following as INFO parameters:
OLD_DN
NEW_DN
A_CSCO-BTS10200_4-4_QRY_CHANGED-NUMBER-ROLLBACKQuery a changed number and return OLD_ parameters. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsSub.qryChangednumberRollback.
MML commands
MML Syntax :
Table 2–119 A_CSCO-BTS10200_4-4_QRY_CHANGED-NUMBER
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE identifier. N/A N/A S R
OLD_DN The old subscriber directory number. N/A N/A S R
Table 2–120 A_CSCO-BTS10200_4-4_QRY_CHANGED-NUMBER-ROLLBACK
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE identifier. N/A N/A S R
OLD_DN The old subscriber directory number. N/A N/A S R
ASDL Commands
Atomic Service Description Layer (ASDL) Commands 2-103
show changed-number old-dn=<OLD_DN>;
Output ParametersReturns the following as Rollback and CSDL parameters:
OLD_DN
NEW_DN
A_CSCO-BTS10200_4-4_QRY_CONTROL-MGW-ROLLBACKQuery a media gateway and return OLD_ params. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsAdmin.qryControlMgwRollback.
MML commands
MML Syntax :
show mgw id=<MGW_ID>;
Output ParametersNone.
A_CSCO-BTS10200_4-4_QRY_CONTROL-TERMINATION-ROLLBACKQuery a termination and return OLD_ parameters. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsAdmin.qryControlTerminationRollback.
MML commands
MML Syntax :
show termination sub-id=<SUB_ID>;
Table 2–121 A_CSCO-BTS10200_4-4_QRY_CONTROL-MGW-ROLLBACK
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE Identifier N/A N/A S R
MGW_ID The media gateway identifier (1-32 ASCII characters).
N/A N/A S R
Table 2–122 A_CSCO-BTS10200_4-4_QRY_CONTROL-TERMINATION-ROLLBACK
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE Identifier N/A N/A S R
SUB_ID The termination identifier. N/A N/A S R
ASDL Commands
2-104 Product Title/BookTitle as a Variable
Output ParametersNone.
A_CSCO-BTS10200_4-4_QRY_DN-TO-SUBSCRIBERQuery a DN2Subscriber. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsSub.qryDnToSubscriber.
MML commands
MML Syntax :
show dn2subscriber dn=<DN>; [office-code-index=<OFFICE_CODE_INDEX > ; || subid=<SUB_ID>]
Output ParametersReturns the following as INFO parameters:
R_OFFICE_CODE_INDEX
R_DNR_STATUS
R_RING_TYPE
R_LNP_TRIGGER
R_NP_RESERVED
R_SUB_ID
Reply : Success: Entries 1of 1 returned.
(OR)
Reply : Success: Database is void of entries.
A_CSCO-BTS10200_4-4_QRY_DN-TO-SUBSCRIBER-ROLLBACKQuery a DN2Subscriber and return OLD_ parameters. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsSub.qryDnToSubscriberRollback.
Table 2–123 A_CSCO-BTS10200_4-4_QRY_DN-TO-SUBSCRIBER
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE identifier. N/A N/A S R
OFFICE_CODE_INDEX
Office code index. N/A N/A S O
DN Directory number assigned to a subscriber.
N/A N/A S O
SUB_ID Subscriber ID of the calling directory numb er.
N/A N/A S O
ASDL Commands
Atomic Service Description Layer (ASDL) Commands 2-105
MML commands
MML Syntax :
show dn2subscriber dn=<DN>; [office-code-index=<OFFICE_CODE_INDEX > ; || subid=<SUB_ID>]
Output ParametersReturns the following as Rollback and CSDL parameters:
R_OFFICE_CODE_INDEX
R_DNR_STATUS
R_RING_TYPE
R_LNP_TRIGGER
R_NP_RESERVED
R_SUB_ID
Reply : Success: Entries 1of 1 returned.
(OR)
Reply : Success: Database is void of entries.
A_CSCO-BTS10200_4-4_QRY_INTERNATIONAL-WB-LISTQuery an international white black list. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsSub.qryInternationalWblist.
Table 2–124 A_CSCO-BTS10200_4-4_QRY_DN-TO-SUBSCRIBER-ROLLBACK
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE identifier. N/A N/A S R
OFFICE_CODE_INDEX
Office code index. N/A N/A S O
DN Directory number assigned to a subscriber.
N/A N/A S O
SUB_ID Subscriber ID of the calling directory number.
N/A N/A S O
Table 2–125 A_CSCO-BTS10200_4-4_QRY_INTERNATIONAL-WB-LIST
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE identifier. N/A N/A S R
COS_RESTRICT_ID Class of service restriction ID. N/A N/A S R
COUNTRY_CODE_NATIONAL_NUMBER
Country code (CC) and national number (NN).
N/A N/A S R
ASDL Commands
2-106 Product Title/BookTitle as a Variable
MML commands
MML Syntax :
show intl-wb-list cos-restrict-id=<COS_RESTRICT_ID>;cc-nn=<COUNTRY_CODE_NATIONAL_NUMBER>;
Output ParametersReturns the following as INFO parameters:
COS_RESTRICT_ID
CC_NN
A_CSCO-BTS10200_4-4_QRY_INTERNATIONAL-WB-LIST-ROLLBACKQuery an international white black list and return OLD_ parameters. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsSub.qryInternationalWblistRollback.
MML commands
MML Syntax :
show intl-wb-list cos-restrict-id=<COS_RESTRICT_ID>;cc-nn=<COUNTRY_CODE_NATIONAL_NUMBER>;
Output ParametersReturns the following as Rollback and CSDL parameters:
COS_RESTRICT_ID
CC_NN
A_CSCO-BTS10200_4-4_QRY_MAC-TO-SUBSCRIBERQuery a MAC address to subscriber. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsSip.qryMacToSubscriber.
Table 2–126 A_CSCO-BTS10200_4-4_QRY_INTERNATIONAL-WB-LIST-ROLLBACK
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE identifier. N/A N/A S R
COS_RESTRICT_ID Class of service restriction ID. N/A N/A S R
COUNTRY_CODE_NATIONAL_NUMBER
Country code (CC) and national number (NN).
N/A N/A S R
ASDL Commands
Atomic Service Description Layer (ASDL) Commands 2-107
MML commands
MML Syntax :
show mac2sub mac-id=<MAC_ID>;
Output ParametersReturns the following as INFO parameters:
MAC_ID[++]
SUB_ID[++]
Reply : Success: Entries 1of 1 returned.
(OR)
Reply : Success: Database is void of entries. Where index starts from 1 to any number.
A_CSCO-BTS10200_4-4_QRY_MAC-TO-SUBSCRIBER-ROLLBACKQuery a MAC address to subscriber and return OLD_ parameters. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsSip.qryMacToSubscriberRollback.
MML commands
MML Syntax :
show mac2sub mac-id=<MAC_ID>;
Output ParametersReturns the following as Rollback and CSDL parameters:
MAC_ID[++]
Table 2–127 A_CSCO-BTS10200_4-4_QRY_MAC-TO-SUBSCRIBER
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE Identifier N/A N/A S R
MAC_ID Mac Address N/A N/A S O
SUB_ID Subscriber ID. N/A N/A S O
Table 2–128 A_CSCO-BTS10200_4-4_QRY_MAC-TO-SUBSCRIBER-ROLLBACK
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE Identifier N/A N/A S R
MAC_ID Mac Address N/A N/A S O
SUB_ID Subscriber ID. N/A N/A S O
ASDL Commands
2-108 Product Title/BookTitle as a Variable
SUB_ID[++]
Reply : Success: Entries 1of 1 returned.
(OR)
Reply : Success: Database is void of entries. Where index starts from 1 to any number.
A_CSCO-BTS10200_4-4_QRY_MGPQuery a media gateway provisioning. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsMgp.qryMgp.
MML commands
MML Syntax :
show mgp ip-addr=<IP_ADDR>;
Output ParametersNone.
A_CSCO-BTS10200_4-4_QRY_MGP-ROLLBACKQuery a media gateway provisioning and return OLD_ parameters. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsMgp.qryMgpRollback.
MML commands
MML Syntax :
show mgp ip-addr=<IP_ADDR>;
Output ParametersNone.
Table 2–129 A_CSCO-BTS10200_4-4_QRY_MGP
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE identifier. N/A N/A S R
IP_ADDR IP address of the device. N/A N/A S R
Table 2–130 A_CSCO-BTS10200_4-4_QRY_MGP-ROLLBACK
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE identifier. N/A N/A S R
IP_ADDR IP address of the device. N/A N/A S R
ASDL Commands
Atomic Service Description Layer (ASDL) Commands 2-109
A_CSCO-BTS10200_4-4_QRY_MGWQuery a media gateway. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsMgw.qryMgw.
MML commands
MML Syntax :
show mgw id=<MGW_ID>;
Output ParametersNone.
A_CSCO-BTS10200_4-4_QRY_MGW-ROLLBACKQuery a media gateway and return OLD_ params. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsMgw.qryMgwRollback.
MML commands
MML Syntax :
show mgw id=<MGW_ID>;
Output ParametersNone.
A_CSCO-BTS10200_4-4_QRY_NATIONAL-WB-LISTQuery a national white black list. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsSub.qryNationalWbList.
Table 2–131 A_CSCO-BTS10200_4-4_QRY_MGW
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE Identifier N/A N/A S R
MGW_ID The media gateway identifier (1-32 ASCII characters).
N/A N/A S R
Table 2–132 A_CSCO-BTS10200_4-4_QRY_MGW-ROLLBACK
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE Identifier N/A N/A S R
MGW_ID The media gateway identifier (1-32 ASCII characters).
N/A N/A S R
ASDL Commands
2-110 Product Title/BookTitle as a Variable
MML commands
MML Syntax :
show nanp-wb-list cos-restrict-id=<COS_RESTRICT_ID>;digit-string=<DIGIT_STRING>;
Output ParametersNone.
A_CSCO-BTS10200_4-4_QRY_NATIONAL-WB-LIST-ROLLBACKQuery a national white black list and return OLD_ parameters. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsSub.qryNationalWbListRollback.
MML commands
MML Syntax :
show nanp-wb-list cos-restrict-id=<COS_RESTRICT_ID>;digit-string=<DIGIT_STRING>;
Output ParametersNone.
A_CSCO-BTS10200_4-4_QRY_NATURE-OF-DIAL-WB-LISTQuery a nature of dial white black list. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsSub.qryNatureOfDialWbList.
Table 2–133 A_CSCO-BTS10200_4-4_QRY_NATIONAL-WB-LIST
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE identifier. N/A N/A S R
COS_RESTRICT_ID Class of service restriction ID. N/A N/A S R
DIGIT_STRING Digit string using dashes. N/A N/A S O
Table 2–134 A_CSCO-BTS10200_4-4_QRY_NATIONAL-WB-LIST-ROLLBACK
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE identifier. N/A N/A S R
COS_RESTRICT_ID Class of service restriction ID. N/A N/A S R
DIGIT_STRING Digit string using dashes. N/A N/A S O
ASDL Commands
Atomic Service Description Layer (ASDL) Commands 2-111
MML commands
MML Syntax :
show nod-wb-list cos-restrict-id=<COS_RESTRICT_ID>;nod=<NATURE_OF_DIAL>;
Output ParametersReturns the following as INFO parameters:
COS_RESTRICT_ID
NOD
A_CSCO-BTS10200_4-4_QRY_NATURE-OF-DIAL-WB-LIST-ROLLBACKQuery a nature of dial white black list and return OLD_ parameters. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsSub.qryNatureOfDialWbListRollback.
MML commands
MML Syntax :
show nod-wb-list cos-restrict-id=<COS_RESTRICT_ID>;nod=<NATURE_OF_DIAL>;
Output ParametersReturns the following as Rollback and CSDL parameters:
COS_RESTRICT_ID
NOD
Table 2–135 A_CSCO-BTS10200_4-4_QRY_NATURE-OF-DIAL-WB-LIST
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE identifier. N/A N/A S R
COS_RESTRICT_ID Class of service restriction ID. N/A N/A S R
NATURE_OF_DIAL Nature of dial. N/A N/A S O
Table 2–136 A_CSCO-BTS10200_4-4_QRY_NATURE-OF-DIAL-WB-LIST-ROLLBACK
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE identifier. N/A N/A S R
COS_RESTRICT_ID Class of service restriction ID. N/A N/A S R
NATURE_OF_DIAL Nature of dial. N/A N/A S O
ASDL Commands
2-112 Product Title/BookTitle as a Variable
A_CSCO-BTS10200_4-4_QRY_ONE-DIGIT-SPEED-CALLQuery a speed call one digit. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsSub.qryOneDigitSpeedCall.
MML commands
MML Syntax :
show sc1d sub-id=<SUB_ID>;
Output ParametersNone.
A_CSCO-BTS10200_4-4_QRY_ONE-DIGIT-SPEED-CALL-ROLLBACKQuery a speed call one digit and return OLD_ parameters. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsSub.qryOneDigitSpeedCallRollback.
MML commands
MML Syntax :
show sc1d sub-id=<SUB_ID>;
Output ParametersNone.
A_CSCO-BTS10200_4-4_QRY_SCREEN-LISTQuery screening list editing. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsSub.qryScreenList.
Table 2–137 A_CSCO-BTS10200_4-4_QRY_ONE-DIGIT-SPEED-CALL
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE identifier. N/A N/A S R
SUB_ID Subscriber ID. N/A N/A S R
Table 2–138 A_CSCO-BTS10200_4-4_QRY_ONE-DIGIT-SPEED-CALL-ROLLBACK
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE identifier. N/A N/A S R
SUB_ID Subscriber ID. N/A N/A S R
ASDL Commands
Atomic Service Description Layer (ASDL) Commands 2-113
MML commands
MML Syntax :
show sle sub-id=<SUB_ID>;fname=<FEATURE_NAME>;dn=<DN>;
Output ParametersNone.
A_CSCO-BTS10200_4-4_QRY_SCREEN-LIST-ROLLBACKQuery screening list editing and return OLD_ parameters. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsSub.qryScreenListRollback.
MML commands
MML Syntax :
show sle sub-id=<SUB_ID>;fname=<FEATURE_NAME>;dn=<DN>;
Output ParametersNone.
Table 2–139 A_CSCO-BTS10200_4-4_QRY_SCREEN-LIST
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE identifier. N/A N/A S R
SUB_ID Subscriber ID from the subscriber. N/A N/A S R
FEATURE_NAME Type of screening feature. N/A N/A S O
DN Directory number entry. N/A N/A S O
ANONYMOUS Anonymous entry. Permitted values are: Y/N.
N/A N/A S O
TIMESTAMP The date and time the entry was added. Integer values permitted from 1 to 9999.
N/A N/A S O
Table 2–140 A_CSCO-BTS10200_4-4_QRY_SCREEN-LIST-ROLLBACK
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE identifier. N/A N/A S R
SUB_ID Subscriber ID from the subscriber. N/A N/A S R
FEATURE_NAME Type of screening feature. N/A N/A S O
DN Directory number entry. N/A N/A S O
ANONYMOUS Anonymous entry. Permitted values are: Y/N.
N/A N/A S O
TIMESTAMP The date and time the entry was added. Integer values permitted from 1 to 9999.
N/A N/A S O
ASDL Commands
2-114 Product Title/BookTitle as a Variable
A_CSCO-BTS10200_4-4_QRY_SUBSCRIBERQuery a subscriber. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsSub.qrySubscriber.
MML commands
MML Syntax :
show subscriber id=<ID>;
Output ParametersReturns the following as INFO parameters:
ID
CATEGORY
NAME
STATUS
BILLING_DN
DN1
PRIVACY
RING_TYPE_DN1
CTXG_ID
TERM_ID
MGW_ID
PIC1
PIC2
PIC3
GRP
USAGE_SENS
SUB_PROFILE_ID
TERM_TYPE
IMMEDIATE_RELEASE
TERMINATING_IMMEDIATE_REL
SEND_BILLING_DN
AOR_ID
Table 2–141 A_CSCO-BTS10200_4-4_QRY_SUBSCRIBER
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE identifier. N/A N/A S R
ID Subscriber ID. N/A N/A S R
ASDL Commands
Atomic Service Description Layer (ASDL) Commands 2-115
SEND_BDN_AS_CPN
SEND_BDN_FOR_EMG
Reply : Success: Entries 1of 1 returned.
(OR)
Reply : Success: Database is void of entries.
A_CSCO-BTS10200_4-4_QRY_SUBSCRIBER-FEATURESQuery subscriber features. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsSub.qrySubscriberFeatures.
MML commands
MML Syntax :
show subscriber-feature-data sub-id=<SUB_ID>;fname=<FEATURE_NAME>;
Output ParametersReturns the following as INFO parameters:
SUB_ID
FNAME[++]
ACTIVE[++]
TYPE1[++]
VALUE1[++]
TYPE3[++]
VALUE3[++]
TYPE4[++]
VALUE4[++]
VOICE_MAIL_ID
Reply : Success: Entries 1of 1 returned.
(OR)
Reply : Success: Database is void of entries. Where index may be 1 to any number.
Table 2–142 A_CSCO-BTS10200_4-4_QRY_SUBSCRIBER-FEATURES
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE identifier. N/A N/A S R
SUB_ID Subscriber ID. N/A N/A S R
FEATURE_NAME Feature name. N/A N/A S O
ASDL Commands
2-116 Product Title/BookTitle as a Variable
A_CSCO-BTS10200_4-4_QRY_SUBSCRIBER-FEATURES-ROLLBACKQuery subscriber features and return OLD_ parameters. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsSub.qrySubscriberFeaturesRollback.
MML commands
MML Syntax :
show subscriber-feature-data sub-id=<SUB_ID>;fname=<FEATURE_NAME>;
Output ParametersReturns the following as Rollback and CSDL parameters:
SUB_ID
FNAME[++]
ACTIVE[++]
TYPE1[++]
VALUE1[++]
TYPE3[++]
VALUE3[++]
TYPE4[++]
VALUE4[++]
VOICE_MAIL_ID
Reply : Success: Entries 1of 1 returned.
(OR)
Reply : Success: Database is void of entries. Where index may be 1 to any number.
A_CSCO-BTS10200_4-4_QRY_SUBSCRIBER-PROFILEQuery a subscriber profile. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsSub.qrySubscriberProfile.
Table 2–143 A_CSCO-BTS10200_4-4_QRY_SUBSCRIBER-FEATURES-ROLLBACK
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE identifier. N/A N/A S R
SUB_ID Subscriber ID. N/A N/A S R
FEATURE_NAME Feature name. N/A N/A S O
ASDL Commands
Atomic Service Description Layer (ASDL) Commands 2-117
MML commands
MML Syntax :
show subscriber-profile id=<SUB_PROFILE_ID>;
Output ParametersNone.
A_CSCO-BTS10200_4-4_QRY_SUBSCRIBER-PROFILE-ROLLBACKQuery a subscriber profile and return OLD_ parameters. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsSub.qrySubscriberProfileRollback.
MML commands
MML Syntax :
show subscriber id=<ID>;
Output ParametersReturns the following as INFO parameters:
ID
CATEGORY
NAME
STATUS
BILLING_DN
DN1
PRIVACY
RING_TYPE_DN1
CTXG_ID
Table 2–144 A_CSCO-BTS10200_4-4_QRY_SUBSCRIBER-PROFILE
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE identifier. N/A N/A S R
SUB_PROFILE_ID Subscriber profile ID. N/A N/A S R
Table 2–145 A_CSCO-BTS10200_4-4_QRY_SUBSCRIBER-PROFILE-ROLLBACK
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE identifier. N/A N/A S R
SUB_PROFILE_ID Subscriber profile ID. N/A N/A S R
ASDL Commands
2-118 Product Title/BookTitle as a Variable
TERM_ID
MGW_ID
PIC1
PIC2
PIC3
GRP
USAGE_SENS
SUB_PROFILE_ID
TERM_TYPE
IMMEDIATE_RELEASE
TERMINATING_IMMEDIATE_REL
SEND_BILLING_DN
AOR_ID
SEND_BDN_AS_CPN
SEND_BDN_FOR_EMG
Reply : Success: Entries 1of 1 returned.
(OR)
Reply : Success: Database is void of entries.
A_CSCO-BTS10200_4-4_QRY_SUBSCRIBER-ROLLBACKQuery a subscriber and return OLD_ parameters. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsSub.qrySubscriberRollback.
MML commands
MML Syntax :
show subscriber id=<ID>;
Output ParametersReturns the following as Rollback and CSDL parameters:
ID
CATEGORY
NAME
Table 2–146 A_CSCO-BTS10200_4-4_QRY_SUBSCRIBER-ROLLBACK
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE identifier. N/A N/A S R
ID Subscriber ID. N/A N/A S R
ASDL Commands
Atomic Service Description Layer (ASDL) Commands 2-119
STATUS
BILLING_DN
DN1
PRIVACY
RING_TYPE_DN1
CTXG_ID
TERM_ID
MGW_ID
PIC1
PIC2
PIC3
GRP
USAGE_SENS
SUB_PROFILE_ID
TERM_TYPE
IMMEDIATE_RELEASE
TERMINATING_IMMEDIATE_REL
SEND_BILLING_DN
AOR_ID
SEND_BDN_AS_CPN
SEND_BDN_FOR_EMG
Reply : Success: Entries 1of 1 returned.
(OR)
Reply : Success: Database is void of entries.
A_CSCO-BTS10200_4-4_QRY_SUBSCRIBER-SERVICE-PROFILEQuery a subscriber service profile. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsSub.qrySubscriberServiceProfile.
MML commands
MML Syntax :
Table 2–147 A_CSCO-BTS10200_4-4_QRY_SUBSCRIBER-SERVICE-PROFILE
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE identifier. N/A N/A S R
SUB_ID Subscriber ID. N/A N/A S R
SERVICE_ID Service ID. N/A N/A S O
ASDL Commands
2-120 Product Title/BookTitle as a Variable
show subscriber-service-profile sub-id=<SUB_ID>;service-id=<SERVICE_ID> ;
Output ParametersReturns the following as INFO parameters:
SUB_ID
SERVICE_ID[++]
Reply : Success: Entries 1of 1 returned.
(OR)
Reply : Success: Database is void of entries.
A_CSCO-BTS10200_4-4_QRY_SUBSCRIBER-SERVICE-PROFILE-ROLLBACKQuery a subscriber service profile and return OLD_ parameters. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsSub.qrySubscriberServiceProfileRollback.
MML commands
MML Syntax :
show subscriber-service-profile sub-id=<SUB_ID>;service-id=<SERVICE_ID> ;
Output ParametersReturns the following as Rollback and CSDL parameters:
OLD_SUB_ID
OLD_SERVICE_ID[++]
Reply : Success: Entries 1of 1 returned.
(OR)
Reply : Success: Database is void of entries.
A_CSCO-BTS10200_4-4_QRY_SUBSCRIBER-TIME-OF-DAYQuery a subscriber time of day. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsSub.qrySubscriberTimeOfDay.
Table 2–148 A_CSCO-BTS10200_4-4_QRY_SUBSCRIBER-SERVICE-PROFILE-ROLLBACK
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE identifier. N/A N/A S R
SUB_ID Subscriber ID. N/A N/A S R
SERVICE_ID Service ID. N/A N/A S O
ASDL Commands
Atomic Service Description Layer (ASDL) Commands 2-121
MML commands
MML Syntax :
show subscriber-tod-schedule sub-id==<SUB_ID> ;
Output ParametersNone.
A_CSCO-BTS10200_4-4_QRY_SUBSCRIBER-TIME-OF-DAY-ROLLBACKQuery a subscriber time of day and return OLD_ parameters. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsSub.qrySubscriberTimeOfDayRollback.
MML commands
MML Syntax :
show subscriber-tod-schedule sub-id==<SUB_ID> ;
Output ParametersNone.
A_CSCO-BTS10200_4-4_QRY_TERMINATIONQuery a termination. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsMgw.qryTermination.
Table 2–149 A_CSCO-BTS10200_4-4_QRY_SUBSCRIBER-TIME-OF-DAY
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE identifier. N/A N/A S R
SUB_ID Subscriber ID. N/A N/A S R
Table 2–150 A_CSCO-BTS10200_4-4_QRY_SUBSCRIBER-TIME-OF-DAY-ROLLBACK
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE identifier. N/A N/A S R
SUB_ID Subscriber ID. N/A N/A S R
Table 2–151 A_CSCO-BTS10200_4-4_QRY_TERMINATION
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE Identifier N/A N/A S R
TERMINATION_ID The termination identifier. N/A N/A S R
MGW_ID ID of the media gateway(1-32 ASCII characters).
N/A N/A S O
ASDL Commands
2-122 Product Title/BookTitle as a Variable
MML commands
MML Syntax :
show termination id=<TERMINATION-ID>; mgw-id=<MGW-ID>;
Output ParametersNone.
A_CSCO-BTS10200_4-4_QRY_TERMINATION-ROLLBACKQuery a termination and return OLD_ parameters. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsMgw.qryTerminationRollback.
MML commands
MML Syntax :
show termination id=<TERMINATION-ID>; mgw-id=<MGW-ID>;
Output ParametersNone.
A_CSCO-BTS10200_4-4_QRY_TWO-DIGIT-SPEED-CALLQuery a speed call two digit. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsSub.qryTwoDigitSpeedCall.
MML commands
MML Syntax :
show sc2d sub-id=<SUB_ID>;
Table 2–152 A_CSCO-BTS10200_4-4_QRY_TERMINATION-ROLLBACK
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE Identifier N/A N/A S R
TERMINATION_ID The termination identifier. N/A N/A S R
MGW_ID ID of the media gateway(1-32 ASCII characters).
N/A N/A S O
Table 2–153 A_CSCO-BTS10200_4-4_QRY_TWO-DIGIT-SPEED-CALL
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE identifier. N/A N/A S R
SUB_ID Subscriber ID. N/A N/A S R
ASDL Commands
Atomic Service Description Layer (ASDL) Commands 2-123
Output ParametersNone.
A_CSCO-BTS10200_4-4_QRY_TWO-DIGIT-SPEED-CALL-ROLLBACKQuery a speed call two digit and return OLD_ parameters. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsSub.qryTwoDigitSpeedCallRollback.
MML commands
MML Syntax :
show sc2d sub-id=<SUB_ID>;
Output ParametersNone.
A_CSCO-BTS10200_4-4_QRY_USER-AUTHENTICATIONQuery a user authentication . It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsSip.qryUserAuthentication.
MML commands
MML Syntax :
show user-auth auth-user=<AUTH_USER>;auth-realm-id=<AUTH_REALM_ID>
Output ParametersReturns the following as INFO parameters:
AUTH_USER
AUTH_REALM_ID
Table 2–154 A_CSCO-BTS10200_4-4_QRY_TWO-DIGIT-SPEED-CALL-ROLLBACK
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE identifier. N/A N/A S R
SUB_ID Subscriber ID. N/A N/A S R
Table 2–155 A_CSCO-BTS10200_4-4_QRY_USER-AUTHENTICATION
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE Identifier N/A N/A S R
AUTH_USER authentication user name. N/A N/A S R
AUTH_REALM_ID authentication realm id N/A N/A S O
ASDL Commands
2-124 Product Title/BookTitle as a Variable
HA1
AOR_ID
A_CSCO-BTS10200_4-4_QRY_USER-AUTHENTICATION-ROLLBACKQuery a user authentication and return OLD_ parameters. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsSip.qryUserAuthenticationRollback.
MML commands
MML Syntax :
show user-auth auth-user=<AUTH_USER>;auth-realm-id=<AUTH_REALM_ID>;
Output ParametersReturns the following as Rollback and CSDL parameters:
AUTH_USER
AUTH_REALM_ID
HA1
AOR_ID
A_CSCO-BTS10200_4-4_SHOW_TRANSACTION-QUEUEView entries in the transaction queue. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsTransaction.showTransactionQueue.
Table 2–156 A_CSCO-BTS10200_4-4_QRY_USER-AUTHENTICATION-ROLLBACK
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE Identifier N/A N/A S R
AUTH_USER authentication user name. N/A N/A S R
AUTH_REALM_ID authentication realm id N/A N/A S O
Table 2–157 A_CSCO-BTS10200_4-4_SHOW_TRANSACTION-QUEUE
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE Identifier N/A N/A S R
TRANSACTION_ID The transaction identifier. N/A N/A C O
TARGET ID of the media where the transaction resides.
N/A N/A S O
SEQUENCE_NUM Numerical representation of the order of the stateminet in the transaction.
N/A N/A S O
User Exit Types
Atomic Service Description Layer (ASDL) Commands 2-125
MML commands
MML Syntax :
show transaction-queue transaction-id=<TRANSACTION-ID>; target=<TARGET>;sequence-num=<SEQUENCE-NUM>; statement=<STATEMENT>; timestamp=<TIMESTAMP>;active-target=<ACTIVE-TARGET>;
Output ParametersTRANSACTION_ID compound parameter
ASDL_COUNTER
A_CSCO-BTS10200_4-4_UNEQUIP_SUBSCRIBER-TERMINATIONUnequip subscriber-termination. It is implemented by the Java method com.metasolv.cartridge.oss.csco_bts_10200_4_4.prov.CscoBtsAdmin.unequipSubscriberTermination.
MML commands
MML Syntax :
unequip subscriber-termination id=<SUBSCRIBER_ID>;
Output ParametersNone.
User Exit TypesUser exit types allow cartridge developers and systems administrators to map ASDL exit codes to one of the predefined base exit types. Base exit types determine the product behavior. Cartridges map return codes and status values from a network element to a user defined exit type.
STATEMENT Oracle and DBM SQL statement applied to the transaction.
N/A N/A S O
TIMESTAMP Day and time of the transaction. N/A N/A S O
ACTIVE_TARGET Specifies if the target is in active or stanby state (Y/N).
N/A N/A S O
Table 2–158 A_CSCO-BTS10200_4-4_UNEQUIP_SUBSCRIBER-TERMINATION
Parameter Name Description RangeDefault Value Type Class
MCLI Host NE Identifier N/A N/A S R
SUBSCRIBER_TERMINATION_ID
Subscriber termination Id on a particular gateway.
N/A N/A S R
Table 2–157 (Cont.) A_CSCO-BTS10200_4-4_SHOW_TRANSACTION-QUEUE
Parameter Name Description RangeDefault Value Type Class
User Exit Types
2-126 Product Title/BookTitle as a Variable
Regular expressions (regex) are used to perform pattern searches on responses from network elements. The pattern is stored in "tbl_user_err" in the SARM database. The user exit type contains a regex pattern that is applied at runtime.
Regular expressions enable users to associate a series of responses to a specific base type. For example, a regular expression "6." can identify a pattern where any response with the character "6" followed by any number of characters will translate to base type of FAIL.
Regular expressions can also allow very specific searches within a response from a network element. Regular expressions are typically compiled before being executed. Compilation produces a binary version of the expression and ensures that the syntax of the regular expression is correct. This compilation occurs using SACT\SADT when user exit types are deployed into ASAP. If the syntax is deemed to be incorrect during compilation, SADT displays an error message and the deployment of the user exit type will fail.
For more information on pattern matching, refer to the ASAP Developer’s Guide and the ASAP System Administrator’s Guide.
Understanding User Exit Type XML Files…<userDefinedExitType><neDescriptor><softwareLoad>DYNAMIC_SL</softwareLoad><technology>DYNAMIC_VENDOR-DYNAMIC_TECH</technology></neDescriptor><searchPattern>SUCCESS.</searchPattern>...1<userType>U_SUCCEED</userType>...2<baseType>SUCCEED<</baseType>...3<description>The ASDL provisioning was successful</description></userDefinedExitType><userDefinedExitType><searchPattern>90.</searchPattern><userType>U_FAIL</userType><baseType>FAIL</baseType><description>The ASDL failed - fail the current order and stop processing.</description></userDefinedExitType><userDefinedExitType><searchPattern>101-110[201-215]</searchPattern>...4<userType>U_SOFT_FAIL</userType><baseType>SOFT_FAIL</baseType><description>The ASDL has encountered a soft failure. Processing will continue.</description></userDefinedExitType><userDefinedExitType><searchPattern>801-850</searchPattern>...5<userType>U_MINOR_ERROR</userType><baseType>SOFT_FAIL</baseType><description>The ASDL has encountered a soft failure. Processing will continue.</description></userDefinedExitType><userDefinedExitType><searchPattern>251-275&&[^261-265]</searchPattern>...6<userType>U_DELAYED_FAIL</userType><baseType>DELAYED_FAIL</baseType><description>The ASDL has failed during provisioning.</description></userDefinedExitType>
User Defined ASDL Exit Types
Atomic Service Description Layer (ASDL) Commands 2-127
<userDefinedExitType><neDescriptor><softwareLoad>BCS36</softwareLoad><technology>NORTEL_DMS</technology><neVendor>Nortel</neVendor></neDescriptor><searchPattern>*.</searchPattern><userType>U_MAINTAIN</userType><baseType>MAINTENANCE</baseType><description>The ASDL will Wait until the NE comes out of Maintenance Mode</description></userDefinedExitType>The numbered elements highlighted in bold in the previous code sample are explained as follows:
1. Pattern searches accommodate situations in which responses from the device contain small variants that represent the same meaning. The user type contains an associated search pattern that is applied at runtime. Using regular expressions, you can default a series of responses. For example a regular expression "90." can specify a pattern where any response with the character "90" followed by any character will translate to base type of FAIL. If the regular expression is defined as "90*", then any response with the character "90" followed by any number of characters will translate to base type of FAIL.
2. The user type that the search pattern maps to.
3. The base type that maps to the user type.
4. 101 to 110 and 201 to 215 will translate to a base type of SOFT_FAIL
5. 801-850 will translate to a base type of SOFT_FAIL. Note that the user type differs from the previous range.
6. 251 to 275 but not 261 to 265 will translate to a base type of DELAYED_FAILURE.
The previous code sample shows some typical search pattern examples. Some additional examples follow:
■ ^.*\b(one|two|three)\b.*$ = matches a complete line of text that contains any of the words "one", "two" or "three"
■ ^(?=.*?\bone\b)(?=.*?\btwo\b)(?=.*?\bthree\b).*$ matches a complete line of text that contains all of the words "one", "two" and "three"
■ "[^"\r\n]*" matches a single-line string that does not allow the quote character to appear inside the string.
■ \b\d{1,3}\.\d{1,3}\.\d{1,3}\.\d{1,3}\b matches any IP address.
For more information on search patterns, refer to http://java.sun.com/j2se/1.4.2/docs/api/java/util/regex/Pattern.html.
For more information on user exit types, refer to the ASAP Developer’s Guide.
User Defined ASDL Exit TypesThe following table lists the user defined ASDL exit types.
UserExitType.xml
2-128 Product Title/BookTitle as a Variable
UserExitType.xml <?xml version="1.0" encoding="UTF-8"?><serviceModel xmlns="http://www.metasolv.com/ServiceActivation/2003/ServiceModel"> <userDefinedExitType> <neDescriptor> <softwareLoad>4-4<//softwareLoad> <technology>BTS10200<//technology> <neVendor>CSCO<//neVendor> <//neDescriptor> <searchPattern>((?s).)*Success((?s).)*<//searchPattern> <userType>CSCO_BTS_SUCCEED<//userType> <baseType>SUCCEED<//baseType> <description>Successfully provisioned the request command<//description> <//userDefinedExitType> ..................... <//serviceModel >
Table 2–159 User Defined ASDL Exit Types
Search Pattern User Type Base Type Description
((?s).)*Success((?s).)* CSCO_BTS_SUCCEED SUCCEED Successfully provisioned the request command
((?s).)*Failure((?s).)* CSCO_BTS_FAIL FAIL Provisioning command failed
((?s).)*Invalid((?s).)* CSCO_BTS_FAIL FAIL Provisioning command failed
((?s).)*Broken pipe((?s).)* CSCO_BTS_RETRY_DIS RETRY_DIS
Setting to RETRY_DIS mode.
((?s).)*Connection to the network element lost((?s).)*
CSCO_BTS_RETRY_DIS RETRY_DIS
Setting to RETRY_DIS mode.
((?s).)*The ((?s).)* Commands ((?s).)* database ((?s).)* does ((?s).)* not ((?s).)* contain ((?s).)* the ((?s).)* verb((?s).)*
CSCO_BTS_FAIL FAIL Provisioning command failed
((?s).)*Required ((?s).)* attributes ((?s).)* missing((?s).)*
CSCO_BTS_FAIL FAIL Provisioning command failed
CLI> CSCO_BTS_SUCCEED SUCCEED Successfully provisioned the request command
CSCO_BTS_PROVEXPTION CSCO_BTS_PROVEXPTION FAIL Cartridge provisioning exception
CSCO_BTS_IOEXPTION CSCO_BTS_IOEXPTION RETRY IO exception when provisioning
CSCO_BTS_TNT_EXPTION CSCO_BTS_TNT_EXPTION RETRY Telnet exception when provisioning
CSCO_BTS_GEN_EXPTION CSCO_BTS_GEN_EXPTION FAIL Any general failure exceptions
CSCO_BTS_NO_MATCH CSCO_BTS_NO_MATCH FAIL No matching exit type found
3
Service Definition 3-1
3Service Definition
The CISCO_BTS_10200_4_4_EMS_1_0 cartridge contains a set of CSDLs that map to one or more ASDL commands. You can also create additional CSDLs that map to existing and newly-created ASDLs. An upstream system can assemble any of these CSDL commands onto a work order for provisioning.
This chapter presents detailed information about the CSDL parameters in this cartridge. The following table lists and describes the type of parameter information that is included.
Table 3–1 ASDL Parameter Information
Item Description
Parameter Name Identifies the parameter that is configured for the stated service.
Description Describes the parameter.
Range Describes or lists the range of values that can be used to satisfy this parameter.
Default Value Configures a default value for the parameter so that it is not mandatory for the upstream system to provide a value.
Type Indicates one of the following parameter types:
■ S - Scalar, specifies the parameter label transmitted on the ASDL command. Scalar parameters are conventional name-value pair parameters.
■ C - Compound, specifies the base name of the compound parameter transmitted on the ASDL command. A compound parameter contains structures or arrays of information that are represented by a particular structure name or compound parameter name. Each compound parameter can contain a large number of elements. If you use compound parameters, you only require a single entry in the ASAP translation tables to call the compound parameter and all its associated parameter elements.
■ I - Indexed, identifies a parameter that contains a sequential numerical index value to tell the SARM that it should execute the same operation (for example, an ASDL command) for all occurrences of that index. Consequently, if there are several options on a particular CSDL command (OPT1, OPT2, OPT3, etc.), you can specify the OPT parameter as an indexed parameter. When you specify the OPT parameter as an indexed parameter, the SARM generates several occurrences of that same ASDL command and each command has a different value for the option being transmitted to the NEP.
For more information on parameter types, refer to the ASAP Developer’s Guide.
CSDL Commands
3-2 Product Title/BookTitle as a Variable
For a detailed description of the Required and Optional parameter classifications, refer to the ASAP Administration Guide.
3.1 CSDL CommandsThis cartridge provides the following CSDL commands:
■ C_CSCO-BTS10200_4-4_ADD_AOR-TO-SUBSCRIBER
■ C_CSCO-BTS10200_4-4_ADD_AUTHORIZATION-CODE
■ C_CSCO-BTS10200_4-4_ADD_AUTHORIZATION-CODE-GROUP
■ C_CSCO-BTS10200_4-4_ADD_CASUAL-WB-LIST
■ C_CSCO-BTS10200_4-4_ADD_CHANGED-NUMBER
■ C_CSCO-BTS10200_4-4_ADD_DN-TO-SUBSCRIBER
■ C_CSCO-BTS10200_4-4_ADD_INTERNATIONAL-WB-LIST
■ C_CSCO-BTS10200_4-4_ADD_MAC-TO-SUBSCRIBER
■ C_CSCO-BTS10200_4-4_ADD_MGP
■ C_CSCO-BTS10200_4-4_ADD_MGW
■ C_CSCO-BTS10200_4-4_ADD_NATIONAL-WB-LIST
■ C_CSCO-BTS10200_4-4_ADD_NATURE-OF-DIAL-WB-LIST
■ C_CSCO-BTS10200_4-4_ADD_ONE-DIGIT-SPEED-CALL
■ C_CSCO-BTS10200_4-4_ADD_RAW-COMMAND
■ C_CSCO-BTS10200_4-4_ADD_SCREEN-LIST
■ C_CSCO-BTS10200_4-4_ADD_SIP-SUBSCRIBER
■ C_CSCO-BTS10200_4-4_ADD_SUBSCRIBER
■ C_CSCO-BTS10200_4-4_ADD_SUBSCRIBER-FEATURES
■ C_CSCO-BTS10200_4-4_ADD_SUBSCRIBER-PROFILE
■ C_CSCO-BTS10200_4-4_ADD_SUBSCRIBER-SERVICE-PROFILE
■ C_CSCO-BTS10200_4-4_ADD_SUBSCRIBER-TIME-OF-DAY
■ C_CSCO-BTS10200_4-4_ADD_TERMINATION
■ C_CSCO-BTS10200_4-4_ADD_TWO-DIGIT-SPEED-CALL
Class Indicates one of the following parameter classifications:
■ R - Required scalar parameter
■ O - Optional scalar parameter
■ C - Required compound parameter
■ N - Optional compound parameter
■ M - Mandatory indexed parameter
■ I - Optional indexed parameter
■ S - Parameter count
Table 3–1 (Cont.) ASDL Parameter Information
Item Description
CSDL Commands
Service Definition 3-3
■ C_CSCO-BTS10200_4-4_ADD_USER-AUTHENTICATION
■ C_CSCO-BTS10200_4-4_CHANGE_AOR-TO-SUBSCRIBER
■ C_CSCO-BTS10200_4-4_CONTROL_MGW
■ C_CSCO-BTS10200_4-4_CONTROL_SUBSCRIBER-TERMINATION
■ C_CSCO-BTS10200_4-4_DEL_AOR-TO-SUBSCRIBER
■ C_CSCO-BTS10200_4-4_DEL_AUTHORIZATION-CODE
■ C_CSCO-BTS10200_4-4_DEL_AUTHORIZATION-CODE-GROUP
■ C_CSCO-BTS10200_4-4_DEL_CASUAL-WB-LIST
■ C_CSCO-BTS10200_4-4_DEL_CHANGED-NUMBER
■ C_CSCO-BTS10200_4-4_DEL_DN-TO-SUBSCRIBER
■ C_CSCO-BTS10200_4-4_DEL_INTERNATIONAL-WB-LIST
■ C_CSCO-BTS10200_4-4_DEL_MAC-TO-SUBSCRIBER
■ C_CSCO-BTS10200_4-4_DEL_MGP
■ C_CSCO-BTS10200_4-4_DEL_MGW
■ C_CSCO-BTS10200_4-4_DEL_NATIONAL-WB-LIST
■ C_CSCO-BTS10200_4-4_DEL_NATURE-OF-DIAL-WB-LIST
■ C_CSCO-BTS10200_4-4_DEL_ONE-DIGIT-SPEED-CALL
■ C_CSCO-BTS10200_4-4_DEL_SCREEN-LIST
■ C_CSCO-BTS10200_4-4_DEL_SUBSCRIBER
■ C_CSCO-BTS10200_4-4_DEL_SUBSCRIBER-FEATURES
■ C_CSCO-BTS10200_4-4_DEL_SUBSCRIBER-PROFILE
■ C_CSCO-BTS10200_4-4_DEL_SUBSCRIBER-SERVICE-PROFILE
■ C_CSCO-BTS10200_4-4_DEL_SUBSCRIBER-TIME-OF-DAY
■ C_CSCO-BTS10200_4-4_DEL_TERMINATION
■ C_CSCO-BTS10200_4-4_DEL_TWO-DIGIT-SPEED-CALL
■ C_CSCO-BTS10200_4-4_DEL_USER-AUTHENTICATION
■ C_CSCO-BTS10200_4-4_EQUIP_SUBSCRIBER-TERMINATION
■ C_CSCO-BTS10200_4-4_MOD_AOR-TO-SUBSCRIBER
■ C_CSCO-BTS10200_4-4_MOD_AUTHORIZATION-CODE
■ C_CSCO-BTS10200_4-4_MOD_AUTHORIZATION-CODE-GROUP
■ C_CSCO-BTS10200_4-4_MOD_CHANGED-NUMBER
■ C_CSCO-BTS10200_4-4_MOD_DN-TO-SUBSCRIBER
■ C_CSCO-BTS10200_4-4_MOD_MAC-TO-SUBSCRIBER
■ C_CSCO-BTS10200_4-4_MOD_MGP
■ C_CSCO-BTS10200_4-4_MOD_MGW
■ C_CSCO-BTS10200_4-4_MOD_ONE-DIGIT-SPEED-CALL
■ C_CSCO-BTS10200_4-4_MOD_SCREEN-LIST
CSDL Commands
3-4 Product Title/BookTitle as a Variable
■ C_CSCO-BTS10200_4-4_MOD_SUBSCRIBER
■ C_CSCO-BTS10200_4-4_MOD_SUBSCRIBER-FEATURES
■ C_CSCO-BTS10200_4-4_MOD_SUBSCRIBER-PROFILE
■ C_CSCO-BTS10200_4-4_MOD_SUBSCRIBER-SERVICE-PROFILE
■ C_CSCO-BTS10200_4-4_MOD_SUBSCRIBER-TIME-OF-DAY
■ C_CSCO-BTS10200_4-4_MOD_TERMINATION
■ C_CSCO-BTS10200_4-4_MOD_TWO-DIGIT-SPEED-CALL
■ C_CSCO-BTS10200_4-4_MOD_USER-AUTHENTICATION
■ C_CSCO-BTS10200_4-4_QRY_AOR-TO-SUBSCRIBER
■ C_CSCO-BTS10200_4-4_QRY_AUTHORIZATION-CODE
■ C_CSCO-BTS10200_4-4_QRY_AUTHORIZATION-CODE-GROUP
■ C_CSCO-BTS10200_4-4_QRY_CASUAL-WB-LIST
■ C_CSCO-BTS10200_4-4_QRY_CHANGED-NUMBER
■ C_CSCO-BTS10200_4-4_QRY_DN-TO-SUBSCRIBER
■ C_CSCO-BTS10200_4-4_QRY_INTERNATIONAL-WB-LIST
■ C_CSCO-BTS10200_4-4_QRY_MAC-TO-SUBSCRIBER
■ C_CSCO-BTS10200_4-4_QRY_MGP
■ C_CSCO-BTS10200_4-4_QRY_MGW
■ C_CSCO-BTS10200_4-4_QRY_NATIONAL-WB-LIST
■ C_CSCO-BTS10200_4-4_QRY_NATURE-OF-DIAL-WB-LIST
■ C_CSCO-BTS10200_4-4_QRY_ONE-DIGIT-SPEED-CALL
■ C_CSCO-BTS10200_4-4_QRY_SCREEN-LIST
■ C_CSCO-BTS10200_4-4_QRY_SUBSCRIBER
■ C_CSCO-BTS10200_4-4_QRY_SUBSCRIBER-FEATURES
■ C_CSCO-BTS10200_4-4_QRY_SUBSCRIBER-PROFILE
■ C_CSCO-BTS10200_4-4_QRY_SUBSCRIBER-SERVICE-PROFILE
■ C_CSCO-BTS10200_4-4_QRY_SUBSCRIBER-TIME-OF-DAY
■ C_CSCO-BTS10200_4-4_QRY_TERMINATION
■ C_CSCO-BTS10200_4-4_QRY_TWO-DIGIT-SPEED-CALL
■ C_CSCO-BTS10200_4-4_QRY_USER-AUTHENTICATION
■ C_CSCO-BTS10200_4-4_SHOW_TRANSACTION-QUEUE
■ C_CSCO-BTS10200_4-4_UNEQUIP_SUBSCRIBER-TERMINATION
3.1.1 C_CSCO-BTS10200_4-4_ADD_AOR-TO-SUBSCRIBERAdd a address of record to subscriber.
CSDL Commands
Service Definition 3-5
3.1.1.1 Mapping to ASDLsThe following table illustrates the CSDL to ASDL mapping for this service.
3.1.2 C_CSCO-BTS10200_4-4_ADD_AUTHORIZATION-CODEAdd an authorization code.
Table 3–2 C_CSCO-BTS10200_4-4_ADD_AOR-TO-SUBSCRIBER
Parameter Name Description RangeDefault Value Type Class
ACTIVE_TARGET Specifies if the target is in active or stanby state (Y/N).
N/A N/A S O
AOR_ID Address of record id for the subscriber. N/A N/A C R
ASDL_COUNTER ASDL sequence counter in CSDL. For internal processing use only.
N/A N/A S O
NE_ID_CSCO-BTS10200_4-4
Host NE Identifier N/A N/A S R
SEQUENCE_NUM Numerical representation of the order of the stateminet in the transaction.
N/A N/A S O
STATEMENT Oracle and DBM SQL statement applied to the transaction.
N/A N/A S O
SUB_ID Subscriber ID N/A N/A S R
TARGET ID of the media where the transaction resides.
N/A N/A S O
TIMESTAMP Day and time of the transaction. N/A N/A S O
TRANSACTION_ID The transaction identifier. N/A N/A C O
TRANSACTION_ID Transaction ID returned by NE after processing MML command.
N/A N/A C O
Table 3–3 CSDL to ASDL Mapping
CSDL ASDL
C_CSCO-BTS10200_4-4_ADD_AOR-TO-SUBSCRIBER A_CSCO-BTS10200_4-4_ADD_AOR-TO-SUBSCRIBER
C_CSCO-BTS10200_4-4_ADD_AOR-TO-SUBSCRIBER A_CSCO-BTS10200_4-4_SHOW_TRANSACTION-QUEUE
Table 3–4 C_CSCO-BTS10200_4-4_ADD_AUTHORIZATION-CODE
Parameter Name Description RangeDefault Value Type Class
ACTIVE_TARGET Specifies if the target is in active or stanby state (Y/N).
N/A N/A S O
ASDL_COUNTER ASDL sequence number in CSDL. For internal processing use only.
N/A N/A S O
AUTH_ACTIVE Indicates the status of the authorization code.
N/A N/A S O
AUTH_CODE_GROUP_ID
Authorization code group ID. N/A N/A S R
AUTH_ID Dialed authorization code. N/A N/A S R
CSDL Commands
3-6 Product Title/BookTitle as a Variable
3.1.2.1 Mapping to ASDLsThe following table illustrates the CSDL to ASDL mapping for this service.
3.1.3 C_CSCO-BTS10200_4-4_ADD_AUTHORIZATION-CODE-GROUPAdd an authorization code group.
COS_RESTRICT_ID Class of service restriction ID. N/A N/A S O
NE_ID_CSCO-BTS10200_4-4
Host NE identifier. N/A N/A S R
SEQUENCE_NUM Numerical representation of the order of the stateminet in the transaction.
N/A N/A S O
STATEMENT Oracle and DBM SQL statement applied to the transaction.
N/A N/A S O
TARGET ID of the media where the transaction resides.
N/A N/A S O
TIMESTAMP Day and time of the transaction. N/A N/A S O
TRANSACTION_ID Transaction ID returned by NE after MML command is processed.
N/A N/A C O
Table 3–5 CSDL to ASDL Mapping
CSDL ASDL
C_CSCO-BTS10200_4-4_ADD_AUTHORIZATION-CODE
A_CSCO-BTS10200_4-4_ADD_AUTHORIZATION-CODE
C_CSCO-BTS10200_4-4_ADD_AUTHORIZATION-CODE
A_CSCO-BTS10200_4-4_SHOW_TRANSACTION-QUEUE
Table 3–6 C_CSCO-BTS10200_4-4_ADD_AUTHORIZATION-CODE-GROUP
Parameter Name Description RangeDefault Value Type Class
ACTIVE_TARGET Specifies if the target is in active or stanby state (Y/N).
N/A N/A S O
ASDL_COUNTER ASDL sequence number in CSDL. For internal processing use only.
N/A N/A S O
AUTH_CODE_GROUP_ID
Authorization code group ID. N/A N/A S R
DESCRIPTION Service provider's description of authorization code.
N/A N/A S O
NE_ID_CSCO-BTS10200_4-4
Host NE identifier. N/A N/A S R
SEQUENCE_NUM Numerical representation of the order of the stateminet in the transaction.
N/A N/A S O
STATEMENT Oracle and DBM SQL statement applied to the transaction.
N/A N/A S O
Table 3–4 (Cont.) C_CSCO-BTS10200_4-4_ADD_AUTHORIZATION-CODE
Parameter Name Description RangeDefault Value Type Class
CSDL Commands
Service Definition 3-7
3.1.3.1 Mapping to ASDLsThe following table illustrates the CSDL to ASDL mapping for this service.
3.1.4 C_CSCO-BTS10200_4-4_ADD_CASUAL-WB-LISTAdd a casual white black list.
3.1.4.1 Mapping to ASDLsThe following table illustrates the CSDL to ASDL mapping for this service.
TARGET ID of the media where the transaction resides.
N/A N/A S O
TIMESTAMP Day and time of the transaction. N/A N/A S O
TRANSACTION_ID Transaction ID returned by NE after MML command is processed.
N/A N/A C O
Table 3–7 CSDL to ASDL Mapping
CSDL ASDL
C_CSCO-BTS10200_4-4_ADD_AUTHORIZATION-CODE-GROUP
A_CSCO-BTS10200_4-4_ADD_AUTHORIZATION-CODE-GROUP
C_CSCO-BTS10200_4-4_ADD_AUTHORIZATION-CODE-GROUP
A_CSCO-BTS10200_4-4_SHOW_TRANSACTION-QUEUE
Table 3–8 C_CSCO-BTS10200_4-4_ADD_CASUAL-WB-LIST
Parameter Name Description RangeDefault Value Type Class
ACTIVE_TARGET Specifies if the target is in active or stanby state (Y/N).
N/A N/A S O
ASDL_COUNTER ASDL sequence number in CSDL. For internal processing use only.
N/A N/A S O
CARRIER Carrier Identification Code (CIC). N/A N/A S R
COS_RESTRICT_ID Class of service restriction ID. N/A N/A S R
NE_ID_CSCO-BTS10200_4-4
Host NE Identifier. N/A N/A S R
SEQUENCE_NUM Numerical representation of the order of the stateminet in the transaction.
N/A N/A S O
STATEMENT Oracle and DBM SQL statement applied to the transaction.
N/A N/A S O
TARGET ID of the media where the transaction resides.
N/A N/A S O
TIMESTAMP Day and time of the transaction. N/A N/A S O
TRANSACTION_ID Transaction ID returned by NE after MML command is processed.
N/A N/A C O
Table 3–6 (Cont.) C_CSCO-BTS10200_4-4_ADD_AUTHORIZATION-CODE-GROUP
Parameter Name Description RangeDefault Value Type Class
CSDL Commands
3-8 Product Title/BookTitle as a Variable
3.1.5 C_CSCO-BTS10200_4-4_ADD_CHANGED-NUMBERAdd a changed number.
3.1.5.1 Mapping to ASDLsThe following table illustrates the CSDL to ASDL mapping for this service.
3.1.6 C_CSCO-BTS10200_4-4_ADD_DN-TO-SUBSCRIBERAdd a DN2Subscriber.
Table 3–9 CSDL to ASDL Mapping
CSDL ASDL
C_CSCO-BTS10200_4-4_ADD_CASUAL-WB-LIST A_CSCO-BTS10200_4-4_QRY_CASUAL-WB-LIST-ROLLBACK
C_CSCO-BTS10200_4-4_ADD_CASUAL-WB-LIST A_CSCO-BTS10200_4-4_ADD_CASUAL-WB-LIST
C_CSCO-BTS10200_4-4_ADD_CASUAL-WB-LIST A_CSCO-BTS10200_4-4_SHOW_TRANSACTION-QUEUE
Table 3–10 C_CSCO-BTS10200_4-4_ADD_CHANGED-NUMBER
Parameter Name Description RangeDefault Value Type Class
ACTIVE_TARGET Specifies if the target is in active or stanby state (Y/N).
N/A N/A S O
ASDL_COUNTER ASDL sequence number in CSDL. For internal processing use only.
N/A N/A S O
NEW_DN The changed or new subscriber DN. N/A N/A S R
NE_ID_CSCO-BTS10200_4-4
Host NE identifier. N/A N/A S R
OLD_DN The old subscriber directory number. N/A N/A S R
SEQUENCE_NUM Numerical representation of the order of the stateminet in the transaction.
N/A N/A S O
STATEMENT Oracle and DBM SQL statement applied to the transaction.
N/A N/A S O
TARGET ID of the media where the transaction resides.
N/A N/A S O
TIMESTAMP Day and time of the transaction. N/A N/A S O
TRANSACTION_ID Transaction ID returned by NE after MML command is processed.
N/A N/A C O
Table 3–11 CSDL to ASDL Mapping
CSDL ASDL
C_CSCO-BTS10200_4-4_ADD_CHANGED-NUMBER A_CSCO-BTS10200_4-4_ADD_CHANGED-NUMBER
C_CSCO-BTS10200_4-4_ADD_CHANGED-NUMBER A_CSCO-BTS10200_4-4_SHOW_TRANSACTION-QUEUE
CSDL Commands
Service Definition 3-9
3.1.6.1 Mapping to ASDLsThe following table illustrates the CSDL to ASDL mapping for this service.
3.1.7 C_CSCO-BTS10200_4-4_ADD_INTERNATIONAL-WB-LISTAdd an international white black list.
Table 3–12 C_CSCO-BTS10200_4-4_ADD_DN-TO-SUBSCRIBER
Parameter Name Description RangeDefault Value Type Class
ACTIVE_TARGET Specifies if the target is in active or stanby state (Y/N).
N/A N/A S O
ANOUNCEMENT_ID Announcement ID. N/A N/A S O
ASDL_COUNTER ASDL sequence number in CSDL. For internal processing use only.
N/A N/A S O
DN Directory number assigned to a subscriber.
N/A N/A S R
DN2SUB_STATUS Status. N/A N/A S R
FDN Full directory number. N/A N/A S O
FROM_DN From directory number. N/A N/A S O
NE_ID_CSCO-BTS10200_4-4
Host NE identifier. N/A N/A S R
NP_RESERVED Local number portability and number pooling.
N/A N/A S O
OFFICE_CODE_INDEX
Office code index. N/A N/A S R
SEQUENCE_NUM Numerical representation of the order of the stateminet in the transaction.
N/A N/A S O
STATEMENT Oracle and DBM SQL statement applied to the transaction.
N/A N/A S O
SUB_ID Subscriber ID of the calling directory number.
N/A N/A S O
TARGET ID of the media where the transaction resides.
N/A N/A S O
TIMESTAMP Day and time of the transaction. N/A N/A S O
TO_DN To directory number. N/A N/A S O
TRANSACTION_ID Transaction ID returned by NE after MML command is processed.
N/A N/A C O
Table 3–13 CSDL to ASDL Mapping
CSDL ASDL
C_CSCO-BTS10200_4-4_ADD_DN-TO-SUBSCRIBER A_CSCO-BTS10200_4-4_ADD_DN-TO-SUBSCRIBER
C_CSCO-BTS10200_4-4_ADD_DN-TO-SUBSCRIBER A_CSCO-BTS10200_4-4_SHOW_TRANSACTION-QUEUE
CSDL Commands
3-10 Product Title/BookTitle as a Variable
3.1.7.1 Mapping to ASDLsThe following table illustrates the CSDL to ASDL mapping for this service.
3.1.8 C_CSCO-BTS10200_4-4_ADD_MAC-TO-SUBSCRIBERAdd a MAC address to subscriber.
Table 3–14 C_CSCO-BTS10200_4-4_ADD_INTERNATIONAL-WB-LIST
Parameter Name Description RangeDefault Value Type Class
ACTIVE_TARGET Specifies if the target is in active or stanby state (Y/N).
N/A N/A S O
ASDL_COUNTER ASDL sequence number in CSDL. For internal processing use only.
N/A N/A S O
COS_RESTRICT_ID Class of service restriction ID. N/A N/A S R
COUNTRY_CODE_NATIONAL_NUMBER
Country code (CC) and national number (NN).
N/A N/A S R
NE_ID_CSCO-BTS10200_4-4
Host NE identifier. N/A N/A S R
SEQUENCE_NUM Numerical representation of the order of the stateminet in the transaction.
N/A N/A S O
STATEMENT Oracle and DBM SQL statement applied to the transaction.
N/A N/A S O
TARGET ID of the media where the transaction resides.
N/A N/A S O
TIMESTAMP Day and time of the transaction. N/A N/A S O
TRANSACTION_ID Transaction ID returned by NE after MML command is processed.
N/A N/A C O
Table 3–15 CSDL to ASDL Mapping
CSDL ASDL
C_CSCO-BTS10200_4-4_ADD_INTERNATIONAL-WB-LIST
A_CSCO-BTS10200_4-4_ADD_INTERNATIONAL-WB-LIST
C_CSCO-BTS10200_4-4_ADD_INTERNATIONAL-WB-LIST
A_CSCO-BTS10200_4-4_SHOW_TRANSACTION-QUEUE
Table 3–16 C_CSCO-BTS10200_4-4_ADD_MAC-TO-SUBSCRIBER
Parameter Name Description RangeDefault Value Type Class
ACTIVE_TARGET Specifies if the target is in active or stanby state (Y/N).
N/A N/A S O
ASDL_COUNTER ASDL sequence counter in CSDL. For internal processing use only.
N/A N/A S O
MAC_ID Mac Address N/A N/A C R
NE_ID_CSCO-BTS10200_4-4
Host NE Identifier N/A N/A S R
SEQUENCE_NUM Numerical representation of the order of the stateminet in the transaction.
N/A N/A S O
CSDL Commands
Service Definition 3-11
3.1.8.1 Mapping to ASDLsThe following table illustrates the CSDL to ASDL mapping for this service.
3.1.9 C_CSCO-BTS10200_4-4_ADD_MGPAdd a media gateway provisioning.
STATEMENT Oracle and DBM SQL statement applied to the transaction.
N/A N/A S O
SUB_ID Subscriber ID. N/A N/A S O
TARGET ID of the media where the transaction resides.
N/A N/A S O
TIMESTAMP Day and time of the transaction. N/A N/A S O
TRANSACTION_ID Transaction ID returned by NE after processing MML command.
N/A N/A C O
Table 3–17 CSDL to ASDL Mapping
CSDL ASDL
C_CSCO-BTS10200_4-4_ADD_MAC-TO-SUBSCRIBER A_CSCO-BTS10200_4-4_ADD_MAC-TO-SUBSCRIBER
C_CSCO-BTS10200_4-4_ADD_MAC-TO-SUBSCRIBER A_CSCO-BTS10200_4-4_SHOW_TRANSACTION-QUEUE
Table 3–18 C_CSCO-BTS10200_4-4_ADD_MGP
Parameter Name Description RangeDefault Value Type Class
ACTIVE_TARGET Specifies if the target is in active or stanby state (Y/N).
N/A N/A S O
ASDL_COUNTER ASDL sequence counter in CSDL. For internal processing use only.
N/A N/A S O
IP_ADDR IP address of the device. N/A N/A S R
MGP_PASSWORD Password used to access the gateway. N/A N/A S R
MGP_TYPE Type of gateway. N/A N/A S R
NE_ID_CSCO-BTS10200_4-4
Host NE identifier. N/A N/A S R
SEQUENCE_NUM Numerical representation of the order of the stateminet in the transaction.
N/A N/A S O
STATEMENT Oracle and DBM SQL statement applied to the transaction.
N/A N/A S O
TARGET ID of the media where the transaction resides.
N/A N/A S O
TIMESTAMP Day and time of the transaction. N/A N/A S O
TRANSACTION_ID Transaction ID returned by NE after processing MML command.
N/A N/A C O
USER_NAME User name used to access the gateway. N/A N/A S R
Table 3–16 (Cont.) C_CSCO-BTS10200_4-4_ADD_MAC-TO-SUBSCRIBER
Parameter Name Description RangeDefault Value Type Class
CSDL Commands
3-12 Product Title/BookTitle as a Variable
3.1.9.1 Mapping to ASDLsThe following table illustrates the CSDL to ASDL mapping for this service.
3.1.10 C_CSCO-BTS10200_4-4_ADD_MGWAdd a media gateway.
Table 3–19 CSDL to ASDL Mapping
CSDL ASDL
C_CSCO-BTS10200_4-4_ADD_MGP A_CSCO-BTS10200_4-4_ADD_MGP
C_CSCO-BTS10200_4-4_ADD_MGP A_CSCO-BTS10200_4-4_SHOW_TRANSACTION-QUEUE
Table 3–20 C_CSCO-BTS10200_4-4_ADD_MGW
Parameter Name Description RangeDefault Value Type Class
ACTIVE_TARGET Specifies if the target is in active or stanby state (Y/N).
N/A N/A S O
AGGR_ID ID of the aggregation devic cable modem termination system (1-16 ASCII characters).
N/A N/A S O
ASDL_COUNTER ASDL sequence counter in CSDL. For internal processing use only.
N/A N/A S O
CALL_AGENT_CONTROL_PORT
Call Agent MGCP listening port for the MGW.
N/A N/A S O
CALL_AGENT_ID ID of the call-agent the subscriber is assigned to in the Call Agent table (1-16 ASCII characters).
N/A N/A S R
MGW_ID The media gateway identifier (1-32 ASCII characters).
N/A N/A S R
MGW_PROFILE_ID ID of the mgw-profile the subscriber is assigned to in the MGW Profile table (1-16 ASCII characters).
N/A N/A S R
MGW_STATUS Service state of the MGW. N/A N/A S O
MGW_TYPE Type of gateway. N/A N/A S R
NE_ID_CSCO-BTS10200_4-4
Host NE Identifier N/A N/A S R
SEQUENCE_NUM Numerical representation of the order of the stateminet in the transaction.
N/A N/A S O
STATEMENT Oracle and DBM SQL statement applied to the transaction.
N/A N/A S O
TARGET ID of the media where the transaction resides.
N/A N/A S O
TIMESTAMP Day and time of the transaction. N/A N/A S O
TRANSACTION_ID Transaction ID returned by NE after processing MML command.
N/A N/A C O
TSAP_ADDR Domain name, IP address or IP address and port number of the device to manage. (1-64 ASCII characters)
N/A N/A S R
CSDL Commands
Service Definition 3-13
3.1.10.1 Mapping to ASDLsThe following table illustrates the CSDL to ASDL mapping for this service.
3.1.11 C_CSCO-BTS10200_4-4_ADD_NATIONAL-WB-LISTAdd a national white black list.
3.1.11.1 Mapping to ASDLsThe following table illustrates the CSDL to ASDL mapping for this service.
3.1.12 C_CSCO-BTS10200_4-4_ADD_NATURE-OF-DIAL-WB-LISTAdd a nature of dial white black list.
Table 3–21 CSDL to ASDL Mapping
CSDL ASDL
C_CSCO-BTS10200_4-4_ADD_MGW A_CSCO-BTS10200_4-4_ADD_MGW
C_CSCO-BTS10200_4-4_ADD_MGW A_CSCO-BTS10200_4-4_SHOW_TRANSACTION-QUEUE
Table 3–22 C_CSCO-BTS10200_4-4_ADD_NATIONAL-WB-LIST
Parameter Name Description RangeDefault Value Type Class
ACTIVE_TARGET Specifies if the target is in active or stanby state (Y/N).
N/A N/A S O
ASDL_COUNTER ASDL sequence number in CSDL. For internal processing use only.
N/A N/A S O
COS_RESTRICT_ID Class of service restriction ID. N/A N/A S R
DIGIT_STRING Digit string using dashes. N/A N/A S O
NE_ID_CSCO-BTS10200_4-4
Host NE identifier. N/A N/A S R
SEQUENCE_NUM Numerical representation of the order of the stateminet in the transaction.
N/A N/A S O
STATEMENT Oracle and DBM SQL statement applied to the transaction.
N/A N/A S O
TARGET ID of the media where the transaction resides.
N/A N/A S O
TIMESTAMP Day and time of the transaction. N/A N/A S O
TRANSACTION_ID Transaction ID returned by NE after MML command is processed.
N/A N/A C O
Table 3–23 CSDL to ASDL Mapping
CSDL ASDL
C_CSCO-BTS10200_4-4_ADD_NATIONAL-WB-LIST A_CSCO-BTS10200_4-4_QRY_NATIONAL-WB-LIST-ROLLBACK
C_CSCO-BTS10200_4-4_ADD_NATIONAL-WB-LIST A_CSCO-BTS10200_4-4_ADD_NATIONAL-WB-LIST
C_CSCO-BTS10200_4-4_ADD_NATIONAL-WB-LIST A_CSCO-BTS10200_4-4_SHOW_TRANSACTION-QUEUE
CSDL Commands
3-14 Product Title/BookTitle as a Variable
3.1.12.1 Mapping to ASDLsThe following table illustrates the CSDL to ASDL mapping for this service.
3.1.13 C_CSCO-BTS10200_4-4_ADD_ONE-DIGIT-SPEED-CALLAdd a speed call one digit.
Table 3–24 C_CSCO-BTS10200_4-4_ADD_NATURE-OF-DIAL-WB-LIST
Parameter Name Description RangeDefault Value Type Class
ACTIVE_TARGET Specifies if the target is in active or stanby state (Y/N).
N/A N/A S O
ASDL_COUNTER ASDL sequence number in CSDL. For internal processing use only.
N/A N/A S O
COS_RESTRICT_ID Class of service restriction ID. N/A N/A S R
NATURE_OF_DIAL Nature of dial. N/A N/A S R
NE_ID_CSCO-BTS10200_4-4
Host NE identifier. N/A N/A S R
SEQUENCE_NUM Numerical representation of the order of the stateminet in the transaction.
N/A N/A S O
STATEMENT Oracle and DBM SQL statement applied to the transaction.
N/A N/A S O
TARGET ID of the media where the transaction resides.
N/A N/A S O
TIMESTAMP Day and time of the transaction. N/A N/A S O
TRANSACTION_ID Transaction ID returned by NE after MML command is processed.
N/A N/A C O
Table 3–25 CSDL to ASDL Mapping
CSDL ASDL
C_CSCO-BTS10200_4-4_ADD_NATURE-OF-DIAL-WB-LIST
A_CSCO-BTS10200_4-4_ADD_NATURE-OF-DIAL-WB-LIST
C_CSCO-BTS10200_4-4_ADD_NATURE-OF-DIAL-WB-LIST
A_CSCO-BTS10200_4-4_SHOW_TRANSACTION-QUEUE
Table 3–26 C_CSCO-BTS10200_4-4_ADD_ONE-DIGIT-SPEED-CALL
Parameter Name Description RangeDefault Value Type Class
ACTIVE_TARGET Specifies if the target is in active or stanby state (Y/N).
N/A N/A S O
ASDL_COUNTER ASDL sequence number in CSDL. For internal processing use only.
N/A N/A S O
DN2 Directory number. N/A N/A S O
DN3 Directory number. N/A N/A S O
DN4 Directory number. N/A N/A S O
DN5 Directory number. N/A N/A S O
DN6 Directory number. N/A N/A S O
CSDL Commands
Service Definition 3-15
3.1.13.1 Mapping to ASDLsThe following table illustrates the CSDL to ASDL mapping for this service.
3.1.14 C_CSCO-BTS10200_4-4_ADD_RAW-COMMANDSend a raw command to the remote NE.
3.1.14.1 Mapping to ASDLsThe following table illustrates the CSDL to ASDL mapping for this service.
DN7 Directory number. N/A N/A S O
DN8 Directory number. N/A N/A S O
DN9 Directory number. N/A N/A S O
NE_ID_CSCO-BTS10200_4-4
Host NE identifier. N/A N/A S R
SEQUENCE_NUM Numerical representation of the order of the stateminet in the transaction.
N/A N/A S O
STATEMENT Oracle and DBM SQL statement applied to the transaction.
N/A N/A S O
SUB_ID Subscriber ID. N/A N/A S R
TARGET ID of the media where the transaction resides.
N/A N/A S O
TIMESTAMP Day and time of the transaction. N/A N/A S O
TRANSACTION_ID Transaction ID returned by NE after MML command is processed.
N/A N/A C O
Table 3–27 CSDL to ASDL Mapping
CSDL ASDL
C_CSCO-BTS10200_4-4_ADD_ONE-DIGIT-SPEED-CALL
A_CSCO-BTS10200_4-4_ADD_ONE-DIGIT-SPEED-CALL
C_CSCO-BTS10200_4-4_ADD_ONE-DIGIT-SPEED-CALL
A_CSCO-BTS10200_4-4_SHOW_TRANSACTION-QUEUE
Table 3–28 C_CSCO-BTS10200_4-4_ADD_RAW-COMMAND
Parameter Name Description RangeDefault Value Type Class
NE_ID_CSCO-BTS10200_4-4
Host NE identifier. N/A N/A S R
RAW_COMMAND Raw Command. N/A N/A S R
Table 3–29 CSDL to ASDL Mapping
CSDL ASDL
C_CSCO-BTS10200_4-4_ADD_RAW-COMMAND A_CSCO-BTS10200_4-4_ADD_RAW-COMMAND
Table 3–26 (Cont.) C_CSCO-BTS10200_4-4_ADD_ONE-DIGIT-SPEED-CALL
Parameter Name Description RangeDefault Value Type Class
CSDL Commands
3-16 Product Title/BookTitle as a Variable
3.1.15 C_CSCO-BTS10200_4-4_ADD_SCREEN-LISTAdd a screening list editing.
3.1.15.1 Mapping to ASDLsThe following table illustrates the CSDL to ASDL mapping for this service.
3.1.16 C_CSCO-BTS10200_4-4_ADD_SIP-SUBSCRIBERAdd and activate a SIP subscriber.
Table 3–30 C_CSCO-BTS10200_4-4_ADD_SCREEN-LIST
Parameter Name Description RangeDefault Value Type Class
ACTIVE_TARGET Specifies if the target is in active or stanby state (Y/N).
N/A N/A S O
ANONYMOUS Anonymous entry. Permitted values are: Y/N.
N/A N/A C O
ASDL_COUNTER ASDL sequence number in CSDL. For internal processing use only.
N/A N/A S O
DN Directory number entry. N/A N/A C R
FEATURE_NAME Type of screening feature. N/A N/A C R
NE_ID_CSCO-BTS10200_4-4
Host NE identifier. N/A N/A S R
SEQUENCE_NUM Numerical representation of the order of the stateminet in the transaction.
N/A N/A S O
STATEMENT Oracle and DBM SQL statement applied to the transaction.
N/A N/A S O
SUB_ID Subscriber ID from the subscriber. N/A N/A S R
TARGET ID of the media where the transaction resides.
N/A N/A S O
TIMESTAMP The date and time the entry was added. Integer values permitted from 1 to 9999.
N/A N/A C O
TRANSACTION_ID Transaction ID returned by NE after MML command is processed.
N/A N/A C O
Table 3–31 CSDL to ASDL Mapping
CSDL ASDL
C_CSCO-BTS10200_4-4_ADD_SCREEN-LIST A_CSCO-BTS10200_4-4_ADD_SCREEN-LIST
C_CSCO-BTS10200_4-4_ADD_SCREEN-LIST A_CSCO-BTS10200_4-4_SHOW_TRANSACTION-QUEUE
Table 3–32 C_CSCO-BTS10200_4-4_ADD_SIP-SUBSCRIBER
Parameter Name Description RangeDefault Value Type Class
ACTIVE_TARGET Specifies if the target is in active or stanby state (Y/N).
N/A N/A S O
ADDRESS1 Address of the subscriber. N/A N/A S O
ADDRESS2 Address of the subscriber. N/A N/A S O
CSDL Commands
Service Definition 3-17
AOR_ID Address of record id for the subscriber. N/A N/A C R
AOR_ID Address of the record ID. N/A N/A S O
ASDL_COUNTER ASDL sequence number in CSDL. For internal processing use only.
N/A N/A S O
AUTH_REALM_ID authentication realm id N/A N/A S O
AUTH_USER authentication user name. N/A N/A S R
BILLING_DN Billing DN. N/A N/A S O
BILLING_TYPE Subscriber billing type. N/A N/A S O
CATEGORY Subscriber category. N/A N/A S O
CITY City of subscriber. N/A N/A S O
COS_RESTRICT_ID COS restriction ID. N/A N/A S O
COUNTRY Country of subscriber. N/A N/A S O
CTXG_ID ID in Centrex Group table. N/A N/A S O
DN1 Subscriber directory number (DN). N/A N/A S O
GROUP Group. N/A N/A S O
H323_TERM_ID The termination ID for an H323 terminal.
N/A N/A S O
ID Subscriber ID. N/A N/A S R
IMMEDIATE_RELEASE
Immediate release procedure. N/A N/A S O
LANGUAGE Subscriber's preferred spoken language. N/A N/A S O
MAC_ID MAC ID for the subscriber. N/A N/A S O
MGW_ID Media Gateway ID. N/A N/A S O
MLHG_ID Multiline Hunt Group ID. N/A N/A S O
MLHG_PREF_LIST_ID MLGH preference list ID. N/A N/A S O
MWI_ON Message waiting indicator on status. N/A N/A S O
NAME Subscriber name. N/A N/A S O
NE_ID_CSCO-BTS10200_4-4
Host NE identifier. N/A N/A S R
PIC1 Preferred interLATA carrier (PIC). N/A N/A S O
PIC2 Preferred interLATA carrier (PIC) 2. N/A N/A S O
PIC3 Preferred interLATA carrier (PIC) 3. N/A N/A S O
POLICY_ID Policy ID. N/A N/A S O
PORTED_IN Permitted values are: Y/N. N/A N/A S O
PRIVACY Privacy. N/A N/A S O
PRIVACY_MANAGER_ID
Privacy manager ID. N/A N/A S O
QOS_ID QOS index. N/A N/A S O
Table 3–32 (Cont.) C_CSCO-BTS10200_4-4_ADD_SIP-SUBSCRIBER
Parameter Name Description RangeDefault Value Type Class
CSDL Commands
3-18 Product Title/BookTitle as a Variable
3.1.16.1 Mapping to ASDLsThe following table illustrates the CSDL to ASDL mapping for this service.
RING_TYPE_DN1 Ring type for DN1. N/A N/A S O
SEND_BDN_AS_CPN Send the billing DN of the subscriber as a CPN.
N/A N/A S O
SEND_BDN_FOREMG Send the billing. N/A N/A S O
SEQUENCE_NUM Numerical representation of the order of the stateminet in the transaction.
N/A N/A S O
STATE State designation. N/A N/A S O
STATEMENT Oracle and DBM SQL statement applied to the transaction.
N/A N/A S O
SUB_ID Subscriber ID N/A N/A S O
SUB_PROFILE_ID Subscriber profile ID. N/A N/A S O
SUB_STATUS Indicates the subscriber status. N/A N/A S O
TARGET ID of the media where the transaction resides.
N/A N/A S O
TERMINATING_IMMEDIATE_REL
Terminating immediate release. N/A N/A S O
TERM_ID Termination ID. N/A N/A S O
TERM_TYPE Termination type. N/A N/A S O
TIMESTAMP Day and time of the transaction. N/A N/A S O
TRANSACTION_ID The transaction identifier. N/A N/A C O
TRANSACTION_ID Transaction ID returned by NE after MML command is processed.
N/A N/A C O
TRUNK_GROUP_ID Trunk group ID. N/A N/A S O
USAGE_SENSITIVE_FEATURE
Usage sensitive features. N/A N/A S O
USER_AUTH_PASSWORD
password for this auth-user. N/A N/A S O
VOICE_MAIL_ID voice mail ID. N/A N/A S O
ZIPCODE Subscriber's zip code. N/A N/A S O
Table 3–33 CSDL to ASDL Mapping
CSDL ASDL
C_CSCO-BTS10200_4-4_ADD_SIP-SUBSCRIBER A_CSCO-BTS10200_4-4_ADD_SUBSCRIBER
C_CSCO-BTS10200_4-4_ADD_SIP-SUBSCRIBER A_CSCO-BTS10200_4-4_ADD_USER-AUTHENTICATION
Table 3–32 (Cont.) C_CSCO-BTS10200_4-4_ADD_SIP-SUBSCRIBER
Parameter Name Description RangeDefault Value Type Class
CSDL Commands
Service Definition 3-19
3.1.17 C_CSCO-BTS10200_4-4_ADD_SUBSCRIBERAdd a subscriber.
C_CSCO-BTS10200_4-4_ADD_SIP-SUBSCRIBER A_CSCO-BTS10200_4-4_QRY_AOR-TO-SUBSCRIBER
C_CSCO-BTS10200_4-4_ADD_SIP-SUBSCRIBER A_CSCO-BTS10200_4-4_MOD_AOR-TO-SUBSCRIBER
C_CSCO-BTS10200_4-4_ADD_SIP-SUBSCRIBER A_CSCO-BTS10200_4-4_SHOW_TRANSACTION-QUEUE
Table 3–34 C_CSCO-BTS10200_4-4_ADD_SUBSCRIBER
Parameter Name Description RangeDefault Value Type Class
ACTIVE_TARGET Specifies if the target is in active or stanby state (Y/N).
N/A N/A S O
ADDRESS1 Address of the subscriber. N/A N/A S O
ADDRESS2 Address of the subscriber. N/A N/A S O
AOR_ID Address of the record ID. N/A N/A S O
ASDL_COUNTER ASDL sequence number in CSDL. For internal processing use only.
N/A N/A S O
BILLING_DN Billing DN. N/A N/A S O
BILLING_TYPE Subscriber billing type. N/A N/A S O
CATEGORY Subscriber category. N/A N/A S O
CITY City of subscriber. N/A N/A S O
COS_RESTRICT_ID COS restriction ID. N/A N/A S O
COUNTRY Country of subscriber. N/A N/A S O
CTXG_ID ID in Centrex Group table. N/A N/A S O
DN1 Subscriber directory number (DN). N/A N/A S O
GROUP Group. N/A N/A S O
H323_TERM_ID The termination ID for an H323 terminal.
N/A N/A S O
ID Subscriber ID. N/A N/A S R
IMMEDIATE_RELEASE
Immediate release procedure. N/A N/A S O
LANGUAGE Subscriber's preferred spoken language. N/A N/A S O
MAC_ID MAC ID for the subscriber. N/A N/A S O
MGW_ID Media Gateway ID. N/A N/A S O
MLHG_ID Multiline Hunt Group ID. N/A N/A S O
MLHG_PREF_LIST_ID MLGH preference list ID. N/A N/A S O
MWI_ON Message waiting indicator on status. N/A N/A S O
NAME Subscriber name. N/A N/A S O
NE_ID_CSCO-BTS10200_4-4
Host NE identifier. N/A N/A S R
Table 3–33 (Cont.) CSDL to ASDL Mapping
CSDL ASDL
CSDL Commands
3-20 Product Title/BookTitle as a Variable
3.1.17.1 Mapping to ASDLsThe following table illustrates the CSDL to ASDL mapping for this service.
PIC1 Preferred interLATA carrier (PIC). N/A N/A S O
PIC2 Preferred interLATA carrier (PIC) 2. N/A N/A S O
PIC3 Preferred interLATA carrier (PIC) 3. N/A N/A S O
POLICY_ID Policy ID. N/A N/A S O
PORTED_IN Permitted values are: Y/N. N/A N/A S O
PRIVACY Privacy. N/A N/A S O
PRIVACY_MANAGER_ID
Privacy manager ID. N/A N/A S O
QOS_ID QOS index. N/A N/A S O
RING_TYPE_DN1 Ring type for DN1. N/A N/A S O
SEND_BDN_AS_CPN Send the billing DN of the subscriber as a CPN.
N/A N/A S O
SEND_BDN_FOREMG Send the billing. N/A N/A S O
SEQUENCE_NUM Numerical representation of the order of the stateminet in the transaction.
N/A N/A S O
STATE State designation. N/A N/A S O
STATEMENT Oracle and DBM SQL statement applied to the transaction.
N/A N/A S O
SUB_PROFILE_ID Subscriber profile ID. N/A N/A S O
SUB_STATUS Indicates the subscriber status. N/A N/A S O
TARGET ID of the media where the transaction resides.
N/A N/A S O
TERMINATING_IMMEDIATE_REL
Terminating immediate release. N/A N/A S O
TERM_ID Termination ID. N/A N/A S O
TERM_TYPE Termination type. N/A N/A S O
TIMESTAMP Day and time of the transaction. N/A N/A S O
TRANSACTION_ID Transaction ID returned by NE after MML command is processed.
N/A N/A C O
TRUNK_GROUP_ID Trunk group ID. N/A N/A S O
USAGE_SENSITIVE_FEATURE
Usage sensitive features. N/A N/A S O
VOICE_MAIL_ID voice mail ID. N/A N/A S O
ZIPCODE Subscriber's zip code. N/A N/A S O
Table 3–34 (Cont.) C_CSCO-BTS10200_4-4_ADD_SUBSCRIBER
Parameter Name Description RangeDefault Value Type Class
CSDL Commands
Service Definition 3-21
3.1.18 C_CSCO-BTS10200_4-4_ADD_SUBSCRIBER-FEATURESAdd subscriber features.
Table 3–35 CSDL to ASDL Mapping
CSDL ASDL
C_CSCO-BTS10200_4-4_ADD_SUBSCRIBER A_CSCO-BTS10200_4-4_ADD_SUBSCRIBER
C_CSCO-BTS10200_4-4_ADD_SUBSCRIBER A_CSCO-BTS10200_4-4_SHOW_TRANSACTION-QUEUE
Table 3–36 C_CSCO-BTS10200_4-4_ADD_SUBSCRIBER-FEATURES
Parameter Name Description RangeDefault Value Type Class
ACTIVE Specifies if the sub ID is activated. N/A N/A C O
ACTIVE_TARGET Specifies if the target is in active or stanby state (Y/N).
N/A N/A S O
ASDL_COUNTER ASDL sequence number in CSDL. For internal processing use only.
N/A N/A S O
FEATURE_NAME Feature name. N/A N/A C R
NE_ID_CSCO-BTS10200_4-4
Host NE identifier. N/A N/A S R
SEQUENCE_NUM Numerical representation of the order of the stateminet in the transaction.
N/A N/A S O
STATEMENT Oracle and DBM SQL statement applied to the transaction.
N/A N/A S O
SUB_ID Subscriber ID. N/A N/A S R
TARGET ID of the media where the transaction resides.
N/A N/A S O
TIMESTAMP Day and time of the transaction. N/A N/A S O
TRANSACTION_ID Transaction ID returned by NE after MML command is processed.
N/A N/A C O
TYPE1 Feature data type 1. N/A N/A C O
TYPE2 Feature data type 2. N/A N/A C O
TYPE3 Feature data type 3. N/A N/A C O
TYPE4 Feature data type 4. N/A N/A C O
VALUE1 Value associated with data type defined in TYPE1.
N/A N/A C O
VALUE2 Value associated with data type defined in TYPE2.
N/A N/A C O
VALUE3 Value associated with data type defined in TYPE3.
N/A N/A C O
VALUE4 Value associated with data type defined in TYPE4.
N/A N/A C O
VOICE_MAIL_ID Voice mail ID. N/A N/A S O
CSDL Commands
3-22 Product Title/BookTitle as a Variable
3.1.18.1 Mapping to ASDLsThe following table illustrates the CSDL to ASDL mapping for this service.
3.1.19 C_CSCO-BTS10200_4-4_ADD_SUBSCRIBER-PROFILEAdd a subscriber profile.
Table 3–37 CSDL to ASDL Mapping
CSDL ASDL
C_CSCO-BTS10200_4-4_ADD_SUBSCRIBER-FEATURES
A_CSCO-BTS10200_4-4_ADD_SUBSCRIBER-FEATURES
C_CSCO-BTS10200_4-4_ADD_SUBSCRIBER-FEATURES
A_CSCO-BTS10200_4-4_SHOW_TRANSACTION-QUEUE
Table 3–38 C_CSCO-BTS10200_4-4_ADD_SUBSCRIBER-PROFILE
Parameter Name Description RangeDefault Value Type Class
ACTIVE_TARGET Specifies if the target is in active or stanby state (Y/N).
N/A N/A S O
ASDL_COUNTER ASDL sequence number in CSDL. For internal processing use only.
N/A N/A S O
COS_RESTRICT_ID Class of service restriction ID. N/A N/A S O
DIAL_PLAN_ID Dial plan profile ID. N/A N/A S R
DIGIT_MAP_ID Digit Map ID. N/A N/A S O
EA_USE_PIC1 Route to PIC1. N/A N/A S O
INTERLATA_PFX1_OPT
InterLATA call. N/A N/A S O
LOCAL_PFX1_OPT Prefix options for a local call. N/A N/A S O
LOCAL_SERVICE_AREA
Local service area. N/A N/A S O
NE_ID_CSCO-BTS10200_4-4
Host NE identifier. N/A N/A S R
ORIG_LINE_INFO Originating line information. N/A N/A S O
POLICY_SERVER_ID Policy server ID. N/A N/A S O
POP_ID Point of presence (POP) ID. N/A N/A S R
PRIVACY_MANAGER_ID
Privacy manager ID. N/A N/A S O
QOS_ID QOS index. N/A N/A S O
REGION Subscriber profile region. N/A N/A S O
SEQUENCE_NUM Numerical representation of the order of the stateminet in the transaction.
N/A N/A S O
SERVICE_ID service ID. N/A N/A S O
STATEMENT Oracle and DBM SQL statement applied to the transaction.
N/A N/A S O
SUB_PROFILE_ID Subscriber profile ID. N/A N/A S R
CSDL Commands
Service Definition 3-23
3.1.19.1 Mapping to ASDLsThe following table illustrates the CSDL to ASDL mapping for this service.
3.1.20 C_CSCO-BTS10200_4-4_ADD_SUBSCRIBER-SERVICE-PROFILEAdd a subscriber service profile.
3.1.20.1 Mapping to ASDLsThe following table illustrates the CSDL to ASDL mapping for this service.
TARGET ID of the media where the transaction resides.
N/A N/A S O
TEST_LINE_TYPE Type of test line. N/A N/A S O
TIMESTAMP Day and time of the transaction. N/A N/A S O
TOLL_PFX1_OPT Prefix options for a intraLATA toll. N/A N/A S O
TRANSACTION_ID Transaction ID returned by NE after MML command is processed.
N/A N/A C O
Table 3–39 CSDL to ASDL Mapping
CSDL ASDL
C_CSCO-BTS10200_4-4_ADD_SUBSCRIBER-PROFILE A_CSCO-BTS10200_4-4_ADD_SUBSCRIBER-PROFILE
C_CSCO-BTS10200_4-4_ADD_SUBSCRIBER-PROFILE A_CSCO-BTS10200_4-4_SHOW_TRANSACTION-QUEUE
Table 3–40 C_CSCO-BTS10200_4-4_ADD_SUBSCRIBER-SERVICE-PROFILE
Parameter Name Description RangeDefault Value Type Class
ACTIVE_TARGET Specifies if the target is in active or stanby state (Y/N).
N/A N/A S O
ASDL_COUNTER ASDL sequence number in CSDL. For internal processing use only.
N/A N/A S O
NE_ID_CSCO-BTS10200_4-4
Host NE identifier. N/A N/A S R
SEQUENCE_NUM Numerical representation of the order of the stateminet in the transaction.
N/A N/A S O
SERVICE_ID Service ID. N/A N/A C R
STATEMENT Oracle and DBM SQL statement applied to the transaction.
N/A N/A S O
SUB_ID Subscriber ID. N/A N/A S R
TARGET ID of the media where the transaction resides.
N/A N/A S O
TIMESTAMP Day and time of the transaction. N/A N/A S O
TRANSACTION_ID Transaction ID returned by NE after MML command is processed.
N/A N/A C O
Table 3–38 (Cont.) C_CSCO-BTS10200_4-4_ADD_SUBSCRIBER-PROFILE
Parameter Name Description RangeDefault Value Type Class
CSDL Commands
3-24 Product Title/BookTitle as a Variable
3.1.21 C_CSCO-BTS10200_4-4_ADD_SUBSCRIBER-TIME-OF-DAYAdd a subscriber time of day.
Table 3–41 CSDL to ASDL Mapping
CSDL ASDL
C_CSCO-BTS10200_4-4_ADD_SUBSCRIBER-SERVICE-PROFILE
A_CSCO-BTS10200_4-4_ADD_SUBSCRIBER-SERVICE-PROFILE
C_CSCO-BTS10200_4-4_ADD_SUBSCRIBER-SERVICE-PROFILE
A_CSCO-BTS10200_4-4_SHOW_TRANSACTION-QUEUE
Table 3–42 C_CSCO-BTS10200_4-4_ADD_SUBSCRIBER-TIME-OF-DAY
Parameter Name Description RangeDefault Value Type Class
ACTION Action of the subscriber. N/A N/A S O
ACTIVE_TARGET Specifies if the target is in active or stanby state (Y/N).
N/A N/A S O
ASDL_COUNTER ASDL sequence number in CSDL. For internal processing use only.
N/A N/A S O
DOY1 Month and day. N/A N/A S O
DOY10 Month and day. N/A N/A S O
DOY2 Month and day. N/A N/A S O
DOY3 Month and day. N/A N/A S O
DOY4 Month and day. N/A N/A S O
DOY5 Month and day. N/A N/A S O
DOY6 Month and day. N/A N/A S O
DOY7 Month and day. N/A N/A S O
DOY8 Month and day. N/A N/A S O
DOY9 Month and day. N/A N/A S O
FEATURE_NAME Feature name. N/A N/A S R
NE_ID_CSCO-BTS10200_4-4
Host NE identifier. N/A N/A S R
SEQUENCE_NUM Numerical representation of the order of the stateminet in the transaction.
N/A N/A S O
START_DOW1 Day of week. N/A N/A S O
START_DOW10 Day of week. N/A N/A S O
START_DOW2 Day of week. N/A N/A S O
START_DOW3 Day of week. N/A N/A S O
START_DOW4 Day of week. N/A N/A S O
START_DOW5 Day of week. N/A N/A S O
START_DOW6 Day of week. N/A N/A S O
START_DOW7 Day of week. N/A N/A S O
START_DOW8 Day of week. N/A N/A S O
CSDL Commands
Service Definition 3-25
START_DOW9 Day of week. N/A N/A S O
START_TIME1 Start time N/A N/A S O
START_TIME10 Start time N/A N/A S O
START_TIME2 Start time N/A N/A S O
START_TIME3 Start time N/A N/A S O
START_TIME4 Start time N/A N/A S O
START_TIME5 Start time N/A N/A S O
START_TIME6 Start time N/A N/A S O
START_TIME7 Start time N/A N/A S O
START_TIME8 Start time N/A N/A S O
START_TIME9 Start time N/A N/A S O
STATEMENT Oracle and DBM SQL statement applied to the transaction.
N/A N/A S O
STOP_DOW1 day of week that this policy ends. N/A N/A S O
STOP_DOW10 day of week that this policy ends. N/A N/A S O
STOP_DOW2 day of week that this policy ends. N/A N/A S O
STOP_DOW3 day of week that this policy ends. N/A N/A S O
STOP_DOW4 day of week that this policy ends. N/A N/A S O
STOP_DOW5 day of week that this policy ends. N/A N/A S O
STOP_DOW6 day of week that this policy ends. N/A N/A S O
STOP_DOW7 day of week that this policy ends. N/A N/A S O
STOP_DOW8 day of week that this policy ends. N/A N/A S O
STOP_DOW9 day of week that this policy ends. N/A N/A S O
STOP_TIME1 Stop time N/A N/A S O
STOP_TIME10 Stop time N/A N/A S O
STOP_TIME2 Stop time N/A N/A S O
STOP_TIME3 Stop time N/A N/A S O
STOP_TIME4 Stop time N/A N/A S O
STOP_TIME5 Stop time N/A N/A S O
STOP_TIME6 Stop time N/A N/A S O
STOP_TIME7 Stop time N/A N/A S O
STOP_TIME8 Stop time N/A N/A S O
STOP_TIME9 Stop time N/A N/A S O
SUB_ID Subscriber ID. N/A N/A S R
Table 3–42 (Cont.) C_CSCO-BTS10200_4-4_ADD_SUBSCRIBER-TIME-OF-DAY
Parameter Name Description RangeDefault Value Type Class
CSDL Commands
3-26 Product Title/BookTitle as a Variable
3.1.21.1 Mapping to ASDLsThe following table illustrates the CSDL to ASDL mapping for this service.
3.1.22 C_CSCO-BTS10200_4-4_ADD_TERMINATIONAdd a termination.
TARGET ID of the media where the transaction resides.
N/A N/A S O
TIMESTAMP Day and time of the transaction. N/A N/A S O
TRANSACTION_ID Transaction ID returned by NE after MML command is processed.
N/A N/A C O
Table 3–43 CSDL to ASDL Mapping
CSDL ASDL
C_CSCO-BTS10200_4-4_ADD_SUBSCRIBER-TIME-OF-DAY
A_CSCO-BTS10200_4-4_ADD_SUBSCRIBER-TIME-OF-DAY
C_CSCO-BTS10200_4-4_ADD_SUBSCRIBER-TIME-OF-DAY
A_CSCO-BTS10200_4-4_SHOW_TRANSACTION-QUEUE
Table 3–44 C_CSCO-BTS10200_4-4_ADD_TERMINATION
Parameter Name Description RangeDefault Value Type Class
ACTIVE_TARGET Specifies if the target is in active or stanby state (Y/N).
N/A N/A S O
ASDL_COUNTER ASDL sequence counter in CSDL. For internal processing use only.
N/A N/A S O
MGW_ID ID of the media gateway(1-32 ASCII characters).
N/A N/A S R
NE_ID_CSCO-BTS10200_4-4
Host NE Identifier N/A N/A S R
PORT_END Port number start N/A N/A S R
PORT_START User assigned token id N/A N/A S R
PREFIX N/A N/A S R
SEQUENCE_NUM Numerical representation of the order of the stateminet in the transaction.
N/A N/A S O
STATEMENT Oracle and DBM SQL statement applied to the transaction.
N/A N/A S O
TARGET ID of the media where the transaction resides.
N/A N/A S O
TERM_OPER_STATUS Termination type. N/A N/A S O
TERM_TYPE Port number end N/A N/A S R
Table 3–42 (Cont.) C_CSCO-BTS10200_4-4_ADD_SUBSCRIBER-TIME-OF-DAY
Parameter Name Description RangeDefault Value Type Class
CSDL Commands
Service Definition 3-27
3.1.22.1 Mapping to ASDLsThe following table illustrates the CSDL to ASDL mapping for this service.
3.1.23 C_CSCO-BTS10200_4-4_ADD_TWO-DIGIT-SPEED-CALLAdd a speed call two digit.
TG Trunk group ID. N/A N/A S O
TIMESTAMP Day and time of the transaction. N/A N/A S O
TRANSACTION_ID Transaction ID returned by NE after processing MML command.
N/A N/A C O
Table 3–45 CSDL to ASDL Mapping
CSDL ASDL
C_CSCO-BTS10200_4-4_ADD_TERMINATION A_CSCO-BTS10200_4-4_ADD_TERMINATION
C_CSCO-BTS10200_4-4_ADD_TERMINATION A_CSCO-BTS10200_4-4_SHOW_TRANSACTION-QUEUE
Table 3–46 C_CSCO-BTS10200_4-4_ADD_TWO-DIGIT-SPEED-CALL
Parameter Name Description RangeDefault Value Type Class
ACTIVE_TARGET Specifies if the target is in active or stanby state (Y/N).
N/A N/A S O
ASDL_COUNTER ASDL sequence number in CSDL. For internal processing use only.
N/A N/A S O
DN20 Directory number. N/A N/A S O
DN21 Directory number. N/A N/A S O
DN22 Directory number. N/A N/A S O
DN23 Directory number. N/A N/A S O
DN24 Directory number. N/A N/A S O
DN25 Directory number. N/A N/A S O
DN26 Directory number. N/A N/A S O
DN27 Directory number. N/A N/A S O
DN28 Directory number. N/A N/A S O
DN29 Directory number. N/A N/A S O
DN30 Directory number. N/A N/A S O
DN31 Directory number. N/A N/A S O
DN32 Directory number. N/A N/A S O
DN33 Directory number. N/A N/A S O
DN34 Directory number. N/A N/A S O
DN35 Directory number. N/A N/A S O
Table 3–44 (Cont.) C_CSCO-BTS10200_4-4_ADD_TERMINATION
Parameter Name Description RangeDefault Value Type Class
CSDL Commands
3-28 Product Title/BookTitle as a Variable
3.1.23.1 Mapping to ASDLsThe following table illustrates the CSDL to ASDL mapping for this service.
3.1.24 C_CSCO-BTS10200_4-4_ADD_USER-AUTHENTICATIONAdd a user authentication .
DN36 Directory number. N/A N/A S O
DN37 Directory number. N/A N/A S O
DN38 Directory number. N/A N/A S O
DN39 Directory number. N/A N/A S O
DN40 Directory number. N/A N/A S O
DN41 Directory number. N/A N/A S O
DN42 Directory number. N/A N/A S O
DN43 Directory number. N/A N/A S O
DN44 Directory number. N/A N/A S O
DN45 Directory number. N/A N/A S O
DN46 Directory number. N/A N/A S O
DN47 Directory number. N/A N/A S O
DN48 Directory number. N/A N/A S O
DN49 Directory number. N/A N/A S O
NE_ID_CSCO-BTS10200_4-4
Host NE identifier. N/A N/A S R
SEQUENCE_NUM Numerical representation of the order of the stateminet in the transaction.
N/A N/A S O
STATEMENT Oracle and DBM SQL statement applied to the transaction.
N/A N/A S O
SUB_ID Subscriber ID. N/A N/A S R
TARGET ID of the media where the transaction resides.
N/A N/A S O
TIMESTAMP Day and time of the transaction. N/A N/A S O
TRANSACTION_ID Transaction ID returned by NE after MML command is processed.
N/A N/A C O
Table 3–47 CSDL to ASDL Mapping
CSDL ASDL
C_CSCO-BTS10200_4-4_ADD_TWO-DIGIT-SPEED-CALL
A_CSCO-BTS10200_4-4_ADD_TWO-DIGIT-SPEED-CALL
C_CSCO-BTS10200_4-4_ADD_TWO-DIGIT-SPEED-CALL
A_CSCO-BTS10200_4-4_SHOW_TRANSACTION-QUEUE
Table 3–46 (Cont.) C_CSCO-BTS10200_4-4_ADD_TWO-DIGIT-SPEED-CALL
Parameter Name Description RangeDefault Value Type Class
CSDL Commands
Service Definition 3-29
3.1.24.1 Mapping to ASDLsThe following table illustrates the CSDL to ASDL mapping for this service.
3.1.25 C_CSCO-BTS10200_4-4_CHANGE_AOR-TO-SUBSCRIBERChange address of record to subscriber.
Table 3–48 C_CSCO-BTS10200_4-4_ADD_USER-AUTHENTICATION
Parameter Name Description RangeDefault Value Type Class
ACTIVE_TARGET Specifies if the target is in active or stanby state (Y/N).
N/A N/A S O
AOR_ID Address of record id N/A N/A S O
ASDL_COUNTER ASDL sequence counter in CSDL. For internal processing use only.
N/A N/A S O
AUTH_REALM_ID authentication realm id N/A N/A S O
AUTH_USER authentication user name. N/A N/A S R
NE_ID_CSCO-BTS10200_4-4
Host NE Identifier N/A N/A S R
SEQUENCE_NUM Numerical representation of the order of the stateminet in the transaction.
N/A N/A S O
STATEMENT Oracle and DBM SQL statement applied to the transaction.
N/A N/A S O
TARGET ID of the media where the transaction resides.
N/A N/A S O
TIMESTAMP Day and time of the transaction. N/A N/A S O
TRANSACTION_ID Transaction ID returned by NE after processing MML command.
N/A N/A C O
USER_AUTH_PASSWORD
password for this auth-user. N/A N/A S O
Table 3–49 CSDL to ASDL Mapping
CSDL ASDL
C_CSCO-BTS10200_4-4_ADD_USER-AUTHENTICATION
A_CSCO-BTS10200_4-4_ADD_USER-AUTHENTICATION
C_CSCO-BTS10200_4-4_ADD_USER-AUTHENTICATION
A_CSCO-BTS10200_4-4_SHOW_TRANSACTION-QUEUE
Table 3–50 C_CSCO-BTS10200_4-4_CHANGE_AOR-TO-SUBSCRIBER
Parameter Name Description RangeDefault Value Type Class
AOR2SUB_STATUS Status of the address of record. N/A N/A S R
AOR_ID Address of record id of the subscriber. N/A N/A S R
NE_ID_CSCO-BTS10200_4-4
Host NE Identifier N/A N/A S R
SUB_ID Subscriber id. N/A N/A S R
CSDL Commands
3-30 Product Title/BookTitle as a Variable
3.1.25.1 Mapping to ASDLsThe following table illustrates the CSDL to ASDL mapping for this service.
3.1.26 C_CSCO-BTS10200_4-4_CONTROL_MGWControl MGW.
3.1.26.1 Mapping to ASDLsThe following table illustrates the CSDL to ASDL mapping for this service.
3.1.27 C_CSCO-BTS10200_4-4_CONTROL_SUBSCRIBER-TERMINATIONControl a subscriber-termination.
Table 3–51 CSDL to ASDL Mapping
CSDL ASDL
C_CSCO-BTS10200_4-4_CHANGE_AOR-TO-SUBSCRIBER
A_CSCO-BTS10200_4-4_CHANGE_AOR-TO-SUBSCRIBER
Table 3–52 C_CSCO-BTS10200_4-4_CONTROL_MGW
Parameter Name Description RangeDefault Value Type Class
MGW_ID The media gateway identifier (1-32 ASCII characters).
N/A N/A S R
MGW_MODE "Mode applied N/A N/A S R
MGW_TARGET_STATE
Target administrative state. N/A N/A S R
NE_ID_CSCO-BTS10200_4-4
Host NE Identifier N/A N/A S R
Table 3–53 CSDL to ASDL Mapping
CSDL ASDL
C_CSCO-BTS10200_4-4_CONTROL_MGW A_CSCO-BTS10200_4-4_QRY_CONTROL-MGW-ROLLBACK
C_CSCO-BTS10200_4-4_CONTROL_MGW A_CSCO-BTS10200_4-4_CONTROL_MGW
Table 3–54 C_CSCO-BTS10200_4-4_CONTROL_SUBSCRIBER-TERMINATION
Parameter Name Description RangeDefault Value Type Class
NE_ID_CSCO-BTS10200_4-4
Host NE Identifier N/A N/A S R
SUBSCRIBER_TERMINATION_ID
Subscriber termination Id on a particular gateway.
N/A N/A S R
SUB_ID The termination identifier. N/A N/A S R
SUB_TERM_MODE "Mode applied N/A N/A S R
SUB_TERM_TARGET_STATE
Target administrative state. N/A N/A S R
CSDL Commands
Service Definition 3-31
3.1.27.1 Mapping to ASDLsThe following table illustrates the CSDL to ASDL mapping for this service.
3.1.28 C_CSCO-BTS10200_4-4_DEL_AOR-TO-SUBSCRIBERDelete a address of record to subscriber.
3.1.28.1 Mapping to ASDLsThe following table illustrates the CSDL to ASDL mapping for this service.
3.1.29 C_CSCO-BTS10200_4-4_DEL_AUTHORIZATION-CODEDelete an authorization code.
Table 3–55 CSDL to ASDL Mapping
CSDL ASDL
C_CSCO-BTS10200_4-4_CONTROL_SUBSCRIBER-TERMINATION
A_CSCO-BTS10200_4-4_QRY_CONTROL-TERMINATION-ROLLBACK
C_CSCO-BTS10200_4-4_CONTROL_SUBSCRIBER-TERMINATION
A_CSCO-BTS10200_4-4_CONTROL_SUBSCRIBER-TERMINATION
Table 3–56 C_CSCO-BTS10200_4-4_DEL_AOR-TO-SUBSCRIBER
Parameter Name Description RangeDefault Value Type Class
ACTIVE_TARGET Specifies if the target is in active or stanby state (Y/N).
N/A N/A S O
AOR_ID Address of record id for the subscriber. N/A N/A S O
ASDL_COUNTER ASDL sequence counter in CSDL. For internal processing use only.
N/A N/A S O
NE_ID_CSCO-BTS10200_4-4
Host NE Identifier N/A N/A S R
SEQUENCE_NUM Numerical representation of the order of the stateminet in the transaction.
N/A N/A S O
STATEMENT Oracle and DBM SQL statement applied to the transaction.
N/A N/A S O
SUB_ID Subscriber ID N/A N/A S O
TARGET ID of the media where the transaction resides.
N/A N/A S O
TIMESTAMP Day and time of the transaction. N/A N/A S O
TRANSACTION_ID Transaction ID returned by NE after processing MML command.
N/A N/A C O
Table 3–57 CSDL to ASDL Mapping
CSDL ASDL
C_CSCO-BTS10200_4-4_DEL_AOR-TO-SUBSCRIBER A_CSCO-BTS10200_4-4_QRY_AOR-TO-SUBSCRIBER-ROLLBACK
C_CSCO-BTS10200_4-4_DEL_AOR-TO-SUBSCRIBER A_CSCO-BTS10200_4-4_DEL_AOR-TO-SUBSCRIBER
C_CSCO-BTS10200_4-4_DEL_AOR-TO-SUBSCRIBER A_CSCO-BTS10200_4-4_SHOW_TRANSACTION-QUEUE
CSDL Commands
3-32 Product Title/BookTitle as a Variable
3.1.29.1 Mapping to ASDLsThe following table illustrates the CSDL to ASDL mapping for this service.
3.1.30 C_CSCO-BTS10200_4-4_DEL_AUTHORIZATION-CODE-GROUPDelete an authorization code group.
Table 3–58 C_CSCO-BTS10200_4-4_DEL_AUTHORIZATION-CODE
Parameter Name Description RangeDefault Value Type Class
ACTIVE_TARGET Specifies if the target is in active or stanby state (Y/N).
N/A N/A S O
ASDL_COUNTER ASDL sequence number in CSDL. For internal processing use only.
N/A N/A S O
AUTH_CODE_GROUP_ID
Authorization code group ID. N/A N/A S R
AUTH_ID Dialed authorization code. N/A N/A S R
NE_ID_CSCO-BTS10200_4-4
Host NE identifier. N/A N/A S R
SEQUENCE_NUM Numerical representation of the order of the stateminet in the transaction.
N/A N/A S O
STATEMENT Oracle and DBM SQL statement applied to the transaction.
N/A N/A S O
TARGET ID of the media where the transaction resides.
N/A N/A S O
TIMESTAMP Day and time of the transaction. N/A N/A S O
TRANSACTION_ID Transaction ID returned by NE after MML command is processed.
N/A N/A C O
Table 3–59 CSDL to ASDL Mapping
CSDL ASDL
C_CSCO-BTS10200_4-4_DEL_AUTHORIZATION-CODE
A_CSCO-BTS10200_4-4_QRY_AUTHORIZATION-CODE-ROLLBACK
C_CSCO-BTS10200_4-4_DEL_AUTHORIZATION-CODE
A_CSCO-BTS10200_4-4_DEL_AUTHORIZATION-CODE
C_CSCO-BTS10200_4-4_DEL_AUTHORIZATION-CODE
A_CSCO-BTS10200_4-4_SHOW_TRANSACTION-QUEUE
Table 3–60 C_CSCO-BTS10200_4-4_DEL_AUTHORIZATION-CODE-GROUP
Parameter Name Description RangeDefault Value Type Class
ACTIVE_TARGET Specifies if the target is in active or stanby state (Y/N).
N/A N/A S O
ASDL_COUNTER ASDL sequence number in CSDL. For internal processing use only.
N/A N/A S O
AUTH_CODE_GROUP_ID
Authorization code group ID. N/A N/A S R
NE_ID_CSCO-BTS10200_4-4
Host NE identifier. N/A N/A S R
CSDL Commands
Service Definition 3-33
3.1.30.1 Mapping to ASDLsThe following table illustrates the CSDL to ASDL mapping for this service.
3.1.31 C_CSCO-BTS10200_4-4_DEL_CASUAL-WB-LISTDelete a casual white black list.
SEQUENCE_NUM Numerical representation of the order of the stateminet in the transaction.
N/A N/A S O
STATEMENT Oracle and DBM SQL statement applied to the transaction.
N/A N/A S O
TARGET ID of the media where the transaction resides.
N/A N/A S O
TIMESTAMP Day and time of the transaction. N/A N/A S O
TRANSACTION_ID Transaction ID returned by NE after MML command is processed.
N/A N/A C O
Table 3–61 CSDL to ASDL Mapping
CSDL ASDL
C_CSCO-BTS10200_4-4_DEL_AUTHORIZATION-CODE-GROUP
A_CSCO-BTS10200_4-4_QRY_AUTHORIZATION-CODE-GROUP-ROLLBACK
C_CSCO-BTS10200_4-4_DEL_AUTHORIZATION-CODE-GROUP
A_CSCO-BTS10200_4-4_DEL_AUTHORIZATION-CODE-GROUP
C_CSCO-BTS10200_4-4_DEL_AUTHORIZATION-CODE-GROUP
A_CSCO-BTS10200_4-4_SHOW_TRANSACTION-QUEUE
Table 3–62 C_CSCO-BTS10200_4-4_DEL_CASUAL-WB-LIST
Parameter Name Description RangeDefault Value Type Class
ACTIVE_TARGET Specifies if the target is in active or stanby state (Y/N).
N/A N/A S O
ASDL_COUNTER ASDL sequence number in CSDL. For internal processing use only.
N/A N/A S O
CARRIER Carrier Identification Code (CIC). N/A N/A S R
COS_RESTRICT_ID Class of service restriction ID. N/A N/A S R
NE_ID_CSCO-BTS10200_4-4
Host NE Identifier. N/A N/A S R
SEQUENCE_NUM Numerical representation of the order of the stateminet in the transaction.
N/A N/A S O
STATEMENT Oracle and DBM SQL statement applied to the transaction.
N/A N/A S O
Table 3–60 (Cont.) C_CSCO-BTS10200_4-4_DEL_AUTHORIZATION-CODE-GROUP
Parameter Name Description RangeDefault Value Type Class
CSDL Commands
3-34 Product Title/BookTitle as a Variable
3.1.31.1 Mapping to ASDLsThe following table illustrates the CSDL to ASDL mapping for this service.
3.1.32 C_CSCO-BTS10200_4-4_DEL_CHANGED-NUMBERDelete a changed number.
3.1.32.1 Mapping to ASDLsThe following table illustrates the CSDL to ASDL mapping for this service.
TARGET ID of the media where the transaction resides.
N/A N/A S O
TIMESTAMP Day and time of the transaction. N/A N/A S O
TRANSACTION_ID Transaction ID returned by NE after MML command is processed.
N/A N/A C O
Table 3–63 CSDL to ASDL Mapping
CSDL ASDL
C_CSCO-BTS10200_4-4_DEL_CASUAL-WB-LIST A_CSCO-BTS10200_4-4_QRY_CASUAL-WB-LIST-ROLLBACK
C_CSCO-BTS10200_4-4_DEL_CASUAL-WB-LIST A_CSCO-BTS10200_4-4_DEL_CASUAL-WB-LIST
C_CSCO-BTS10200_4-4_DEL_CASUAL-WB-LIST A_CSCO-BTS10200_4-4_SHOW_TRANSACTION-QUEUE
Table 3–64 C_CSCO-BTS10200_4-4_DEL_CHANGED-NUMBER
Parameter Name Description RangeDefault Value Type Class
ACTIVE_TARGET Specifies if the target is in active or stanby state (Y/N).
N/A N/A S O
ASDL_COUNTER ASDL sequence number in CSDL. For internal processing use only.
N/A N/A S O
NE_ID_CSCO-BTS10200_4-4
Host NE identifier. N/A N/A S R
OLD_DN The old subscriber directory number. N/A N/A S R
SEQUENCE_NUM Numerical representation of the order of the stateminet in the transaction.
N/A N/A S O
STATEMENT Oracle and DBM SQL statement applied to the transaction.
N/A N/A S O
TARGET ID of the media where the transaction resides.
N/A N/A S O
TIMESTAMP Day and time of the transaction. N/A N/A S O
TRANSACTION_ID Transaction ID returned by NE after MML command is processed.
N/A N/A C O
Table 3–62 (Cont.) C_CSCO-BTS10200_4-4_DEL_CASUAL-WB-LIST
Parameter Name Description RangeDefault Value Type Class
CSDL Commands
Service Definition 3-35
3.1.33 C_CSCO-BTS10200_4-4_DEL_DN-TO-SUBSCRIBERDelete a DN2Subscriber.
3.1.33.1 Mapping to ASDLsThe following table illustrates the CSDL to ASDL mapping for this service.
Table 3–65 CSDL to ASDL Mapping
CSDL ASDL
C_CSCO-BTS10200_4-4_DEL_CHANGED-NUMBER A_CSCO-BTS10200_4-4_QRY_CHANGED-NUMBER-ROLLBACK
C_CSCO-BTS10200_4-4_DEL_CHANGED-NUMBER A_CSCO-BTS10200_4-4_DEL_CHANGED-NUMBER
C_CSCO-BTS10200_4-4_DEL_CHANGED-NUMBER A_CSCO-BTS10200_4-4_SHOW_TRANSACTION-QUEUE
Table 3–66 C_CSCO-BTS10200_4-4_DEL_DN-TO-SUBSCRIBER
Parameter Name Description RangeDefault Value Type Class
ACTIVE_TARGET Specifies if the target is in active or stanby state (Y/N).
N/A N/A S O
ASDL_COUNTER ASDL sequence number in CSDL. For internal processing use only.
N/A N/A S O
DN Directory number assigned to a subscriber.
N/A N/A S O
NE_ID_CSCO-BTS10200_4-4
Host NE identifier. N/A N/A S R
OFFICE_CODE_INDEX
Office code index. N/A N/A S O
SEQUENCE_NUM Numerical representation of the order of the stateminet in the transaction.
N/A N/A S O
STATEMENT Oracle and DBM SQL statement applied to the transaction.
N/A N/A S O
SUB_ID Subscriber ID of the calling directory number.
N/A N/A S O
TARGET ID of the media where the transaction resides.
N/A N/A S O
TIMESTAMP Day and time of the transaction. N/A N/A S O
TRANSACTION_ID Transaction ID returned by NE after MML command is processed.
N/A N/A C O
Table 3–67 CSDL to ASDL Mapping
CSDL ASDL
C_CSCO-BTS10200_4-4_DEL_DN-TO-SUBSCRIBER A_CSCO-BTS10200_4-4_QRY_DN-TO-SUBSCRIBER-ROLLBACK
C_CSCO-BTS10200_4-4_DEL_DN-TO-SUBSCRIBER A_CSCO-BTS10200_4-4_DEL_DN-TO-SUBSCRIBER
C_CSCO-BTS10200_4-4_DEL_DN-TO-SUBSCRIBER A_CSCO-BTS10200_4-4_SHOW_TRANSACTION-QUEUE
CSDL Commands
3-36 Product Title/BookTitle as a Variable
3.1.34 C_CSCO-BTS10200_4-4_DEL_INTERNATIONAL-WB-LISTDelete an international white black list.
3.1.34.1 Mapping to ASDLsThe following table illustrates the CSDL to ASDL mapping for this service.
3.1.35 C_CSCO-BTS10200_4-4_DEL_MAC-TO-SUBSCRIBERDelete a MAC address to subscriber.
Table 3–68 C_CSCO-BTS10200_4-4_DEL_INTERNATIONAL-WB-LIST
Parameter Name Description RangeDefault Value Type Class
ACTIVE_TARGET Specifies if the target is in active or stanby state (Y/N).
N/A N/A S O
ASDL_COUNTER ASDL sequence number in CSDL. For internal processing use only.
N/A N/A S O
COS_RESTRICT_ID Class of service restriction ID. N/A N/A S R
COUNTRY_CODE_NATIONAL_NUMBER
Country code (CC) and national number (NN).
N/A N/A S R
NE_ID_CSCO-BTS10200_4-4
Host NE identifier. N/A N/A S R
SEQUENCE_NUM Numerical representation of the order of the stateminet in the transaction.
N/A N/A S O
STATEMENT Oracle and DBM SQL statement applied to the transaction.
N/A N/A S O
TARGET ID of the media where the transaction resides.
N/A N/A S O
TIMESTAMP Day and time of the transaction. N/A N/A S O
TRANSACTION_ID Transaction ID returned by NE after MML command is processed.
N/A N/A C O
Table 3–69 CSDL to ASDL Mapping
CSDL ASDL
C_CSCO-BTS10200_4-4_DEL_INTERNATIONAL-WB-LIST
A_CSCO-BTS10200_4-4_QRY_INTERNATIONAL-WB-LIST-ROLLBACK
C_CSCO-BTS10200_4-4_DEL_INTERNATIONAL-WB-LIST
A_CSCO-BTS10200_4-4_DEL_INTERNATIONAL-WB-LIST
C_CSCO-BTS10200_4-4_DEL_INTERNATIONAL-WB-LIST
A_CSCO-BTS10200_4-4_SHOW_TRANSACTION-QUEUE
Table 3–70 C_CSCO-BTS10200_4-4_DEL_MAC-TO-SUBSCRIBER
Parameter Name Description RangeDefault Value Type Class
ACTIVE_TARGET Specifies if the target is in active or stanby state (Y/N).
N/A N/A S O
ASDL_COUNTER ASDL sequence counter in CSDL. For internal processing use only.
N/A N/A S O
MAC_ID Mac Address N/A N/A S O
CSDL Commands
Service Definition 3-37
3.1.35.1 Mapping to ASDLsThe following table illustrates the CSDL to ASDL mapping for this service.
3.1.36 C_CSCO-BTS10200_4-4_DEL_MGPDelete a media gateway provisioning.
NE_ID_CSCO-BTS10200_4-4
Host NE Identifier N/A N/A S R
SEQUENCE_NUM Numerical representation of the order of the stateminet in the transaction.
N/A N/A S O
STATEMENT Oracle and DBM SQL statement applied to the transaction.
N/A N/A S O
SUB_ID Subscriber ID. N/A N/A S O
TARGET ID of the media where the transaction resides.
N/A N/A S O
TIMESTAMP Day and time of the transaction. N/A N/A S O
TRANSACTION_ID Transaction ID returned by NE after processing MML command.
N/A N/A C O
Table 3–71 CSDL to ASDL Mapping
CSDL ASDL
C_CSCO-BTS10200_4-4_DEL_MAC-TO-SUBSCRIBER A_CSCO-BTS10200_4-4_QRY_MAC-TO-SUBSCRIBER-ROLLBACK
C_CSCO-BTS10200_4-4_DEL_MAC-TO-SUBSCRIBER A_CSCO-BTS10200_4-4_DEL_MAC-TO-SUBSCRIBER
C_CSCO-BTS10200_4-4_DEL_MAC-TO-SUBSCRIBER A_CSCO-BTS10200_4-4_SHOW_TRANSACTION-QUEUE
Table 3–72 C_CSCO-BTS10200_4-4_DEL_MGP
Parameter Name Description RangeDefault Value Type Class
ACTIVE_TARGET Specifies if the target is in active or stanby state (Y/N).
N/A N/A S O
ASDL_COUNTER ASDL sequence counter in CSDL. For internal processing use only.
N/A N/A S O
IP_ADDR IP address of the device. N/A N/A S R
NE_ID_CSCO-BTS10200_4-4
Host NE identifier. N/A N/A S R
SEQUENCE_NUM Numerical representation of the order of the stateminet in the transaction.
N/A N/A S O
STATEMENT Oracle and DBM SQL statement applied to the transaction.
N/A N/A S O
Table 3–70 (Cont.) C_CSCO-BTS10200_4-4_DEL_MAC-TO-SUBSCRIBER
Parameter Name Description RangeDefault Value Type Class
CSDL Commands
3-38 Product Title/BookTitle as a Variable
3.1.36.1 Mapping to ASDLsThe following table illustrates the CSDL to ASDL mapping for this service.
3.1.37 C_CSCO-BTS10200_4-4_DEL_MGWDelete a media gateway.
3.1.37.1 Mapping to ASDLsThe following table illustrates the CSDL to ASDL mapping for this service.
TARGET ID of the media where the transaction resides.
N/A N/A S O
TIMESTAMP Day and time of the transaction. N/A N/A S O
TRANSACTION_ID Transaction ID returned by NE after processing MML command.
N/A N/A C O
Table 3–73 CSDL to ASDL Mapping
CSDL ASDL
C_CSCO-BTS10200_4-4_DEL_MGP A_CSCO-BTS10200_4-4_QRY_MGP-ROLLBACK
C_CSCO-BTS10200_4-4_DEL_MGP A_CSCO-BTS10200_4-4_DEL_MGP
C_CSCO-BTS10200_4-4_DEL_MGP A_CSCO-BTS10200_4-4_SHOW_TRANSACTION-QUEUE
Table 3–74 C_CSCO-BTS10200_4-4_DEL_MGW
Parameter Name Description RangeDefault Value Type Class
ACTIVE_TARGET Specifies if the target is in active or stanby state (Y/N).
N/A N/A S O
ASDL_COUNTER ASDL sequence counter in CSDL. For internal processing use only.
N/A N/A S O
MGW_ID The media gateway identifier (1-32 ASCII characters).
N/A N/A S R
NE_ID_CSCO-BTS10200_4-4
Host NE Identifier N/A N/A S R
SEQUENCE_NUM Numerical representation of the order of the stateminet in the transaction.
N/A N/A S O
STATEMENT Oracle and DBM SQL statement applied to the transaction.
N/A N/A S O
TARGET ID of the media where the transaction resides.
N/A N/A S O
TIMESTAMP Day and time of the transaction. N/A N/A S O
TRANSACTION_ID Transaction ID returned by NE after processing MML command.
N/A N/A C O
Table 3–72 (Cont.) C_CSCO-BTS10200_4-4_DEL_MGP
Parameter Name Description RangeDefault Value Type Class
CSDL Commands
Service Definition 3-39
3.1.38 C_CSCO-BTS10200_4-4_DEL_NATIONAL-WB-LISTDelete a national white black list.
3.1.38.1 Mapping to ASDLsThe following table illustrates the CSDL to ASDL mapping for this service.
3.1.39 C_CSCO-BTS10200_4-4_DEL_NATURE-OF-DIAL-WB-LISTDelete a nature of dial white black list.
Table 3–75 CSDL to ASDL Mapping
CSDL ASDL
C_CSCO-BTS10200_4-4_DEL_MGW A_CSCO-BTS10200_4-4_QRY_MGW-ROLLBACK
C_CSCO-BTS10200_4-4_DEL_MGW A_CSCO-BTS10200_4-4_DEL_MGW
C_CSCO-BTS10200_4-4_DEL_MGW A_CSCO-BTS10200_4-4_SHOW_TRANSACTION-QUEUE
Table 3–76 C_CSCO-BTS10200_4-4_DEL_NATIONAL-WB-LIST
Parameter Name Description RangeDefault Value Type Class
ACTIVE_TARGET Specifies if the target is in active or stanby state (Y/N).
N/A N/A S O
ASDL_COUNTER ASDL sequence number in CSDL. For internal processing use only.
N/A N/A S O
COS_RESTRICT_ID Class of service restriction ID. N/A N/A S R
DIGIT_STRING Digit string using dashes. N/A N/A S O
NE_ID_CSCO-BTS10200_4-4
Host NE identifier. N/A N/A S R
SEQUENCE_NUM Numerical representation of the order of the stateminet in the transaction.
N/A N/A S O
STATEMENT Oracle and DBM SQL statement applied to the transaction.
N/A N/A S O
TARGET ID of the media where the transaction resides.
N/A N/A S O
TIMESTAMP Day and time of the transaction. N/A N/A S O
TRANSACTION_ID Transaction ID returned by NE after MML command is processed.
N/A N/A C O
Table 3–77 CSDL to ASDL Mapping
CSDL ASDL
C_CSCO-BTS10200_4-4_DEL_NATIONAL-WB-LIST A_CSCO-BTS10200_4-4_QRY_NATIONAL-WB-LIST-ROLLBACK
C_CSCO-BTS10200_4-4_DEL_NATIONAL-WB-LIST A_CSCO-BTS10200_4-4_DEL_NATIONAL-WB-LIST
C_CSCO-BTS10200_4-4_DEL_NATIONAL-WB-LIST A_CSCO-BTS10200_4-4_SHOW_TRANSACTION-QUEUE
CSDL Commands
3-40 Product Title/BookTitle as a Variable
3.1.39.1 Mapping to ASDLsThe following table illustrates the CSDL to ASDL mapping for this service.
3.1.40 C_CSCO-BTS10200_4-4_DEL_ONE-DIGIT-SPEED-CALLDelete a speed call one digit.
Table 3–78 C_CSCO-BTS10200_4-4_DEL_NATURE-OF-DIAL-WB-LIST
Parameter Name Description RangeDefault Value Type Class
ACTIVE_TARGET Specifies if the target is in active or stanby state (Y/N).
N/A N/A S O
ASDL_COUNTER ASDL sequence number in CSDL. For internal processing use only.
N/A N/A S O
COS_RESTRICT_ID Class of service restriction ID. N/A N/A S R
NATURE_OF_DIAL Nature of dial. N/A N/A S O
NE_ID_CSCO-BTS10200_4-4
Host NE identifier. N/A N/A S R
SEQUENCE_NUM Numerical representation of the order of the stateminet in the transaction.
N/A N/A S O
STATEMENT Oracle and DBM SQL statement applied to the transaction.
N/A N/A S O
TARGET ID of the media where the transaction resides.
N/A N/A S O
TIMESTAMP Day and time of the transaction. N/A N/A S O
TRANSACTION_ID Transaction ID returned by NE after MML command is processed.
N/A N/A C O
Table 3–79 CSDL to ASDL Mapping
CSDL ASDL
C_CSCO-BTS10200_4-4_DEL_NATURE-OF-DIAL-WB-LIST
A_CSCO-BTS10200_4-4_QRY_NATURE-OF-DIAL-WB-LIST-ROLLBACK
C_CSCO-BTS10200_4-4_DEL_NATURE-OF-DIAL-WB-LIST
A_CSCO-BTS10200_4-4_DEL_NATURE-OF-DIAL-WB-LIST
C_CSCO-BTS10200_4-4_DEL_NATURE-OF-DIAL-WB-LIST
A_CSCO-BTS10200_4-4_SHOW_TRANSACTION-QUEUE
Table 3–80 C_CSCO-BTS10200_4-4_DEL_ONE-DIGIT-SPEED-CALL
Parameter Name Description RangeDefault Value Type Class
ACTIVE_TARGET Specifies if the target is in active or stanby state (Y/N).
N/A N/A S O
ASDL_COUNTER ASDL sequence number in CSDL. For internal processing use only.
N/A N/A S O
DN2 Directory number. N/A N/A S O
DN3 Directory number. N/A N/A S O
DN4 Directory number. N/A N/A S O
CSDL Commands
Service Definition 3-41
3.1.40.1 Mapping to ASDLsThe following table illustrates the CSDL to ASDL mapping for this service.
3.1.41 C_CSCO-BTS10200_4-4_DEL_SCREEN-LISTDelete a screening list editing.
DN5 Directory number. N/A N/A S O
DN6 Directory number. N/A N/A S O
DN7 Directory number. N/A N/A S O
DN8 Directory number. N/A N/A S O
DN9 Directory number. N/A N/A S O
NE_ID_CSCO-BTS10200_4-4
Host NE identifier. N/A N/A S R
SEQUENCE_NUM Numerical representation of the order of the stateminet in the transaction.
N/A N/A S O
STATEMENT Oracle and DBM SQL statement applied to the transaction.
N/A N/A S O
SUB_ID Subscriber ID. N/A N/A S R
TARGET ID of the media where the transaction resides.
N/A N/A S O
TIMESTAMP Day and time of the transaction. N/A N/A S O
TRANSACTION_ID Transaction ID returned by NE after MML command is processed.
N/A N/A C O
Table 3–81 CSDL to ASDL Mapping
CSDL ASDL
C_CSCO-BTS10200_4-4_DEL_ONE-DIGIT-SPEED-CALL
A_CSCO-BTS10200_4-4_QRY_ONE-DIGIT-SPEED-CALL-ROLLBACK
C_CSCO-BTS10200_4-4_DEL_ONE-DIGIT-SPEED-CALL
A_CSCO-BTS10200_4-4_DEL_ONE-DIGIT-SPEED-CALL
C_CSCO-BTS10200_4-4_DEL_ONE-DIGIT-SPEED-CALL
A_CSCO-BTS10200_4-4_SHOW_TRANSACTION-QUEUE
Table 3–82 C_CSCO-BTS10200_4-4_DEL_SCREEN-LIST
Parameter Name Description RangeDefault Value Type Class
ACTIVE_TARGET Specifies if the target is in active or stanby state (Y/N).
N/A N/A S O
ANONYMOUS Anonymous entry. Permitted values are: Y/N.
N/A N/A S O
ASDL_COUNTER ASDL sequence number in CSDL. For internal processing use only.
N/A N/A S O
DN Directory number entry. N/A N/A S O
Table 3–80 (Cont.) C_CSCO-BTS10200_4-4_DEL_ONE-DIGIT-SPEED-CALL
Parameter Name Description RangeDefault Value Type Class
CSDL Commands
3-42 Product Title/BookTitle as a Variable
3.1.41.1 Mapping to ASDLsThe following table illustrates the CSDL to ASDL mapping for this service.
3.1.42 C_CSCO-BTS10200_4-4_DEL_SUBSCRIBERDelete a subscriber.
FEATURE_NAME Type of screening feature. N/A N/A S O
NE_ID_CSCO-BTS10200_4-4
Host NE identifier. N/A N/A S R
SEQUENCE_NUM Numerical representation of the order of the stateminet in the transaction.
N/A N/A S O
STATEMENT Oracle and DBM SQL statement applied to the transaction.
N/A N/A S O
SUB_ID Subscriber ID from the subscriber. N/A N/A S R
TARGET ID of the media where the transaction resides.
N/A N/A S O
TIMESTAMP The date and time the entry was added. Integer values permitted from 1 to 9999.
N/A N/A S O
TRANSACTION_ID Transaction ID returned by NE after MML command is processed.
N/A N/A C O
Table 3–83 CSDL to ASDL Mapping
CSDL ASDL
C_CSCO-BTS10200_4-4_DEL_SCREEN-LIST A_CSCO-BTS10200_4-4_QRY_SCREEN-LIST-ROLLBACK
C_CSCO-BTS10200_4-4_DEL_SCREEN-LIST A_CSCO-BTS10200_4-4_DEL_SCREEN-LIST
C_CSCO-BTS10200_4-4_DEL_SCREEN-LIST A_CSCO-BTS10200_4-4_SHOW_TRANSACTION-QUEUE
Table 3–84 C_CSCO-BTS10200_4-4_DEL_SUBSCRIBER
Parameter Name Description RangeDefault Value Type Class
ACTIVE_TARGET Specifies if the target is in active or stanby state (Y/N).
N/A N/A S O
ASDL_COUNTER ASDL sequence number in CSDL. For internal processing use only.
N/A N/A S O
ID Subscriber ID. N/A N/A S R
NE_ID_CSCO-BTS10200_4-4
Host NE identifier. N/A N/A S R
SEQUENCE_NUM Numerical representation of the order of the stateminet in the transaction.
N/A N/A S O
STATEMENT Oracle and DBM SQL statement applied to the transaction.
N/A N/A S O
Table 3–82 (Cont.) C_CSCO-BTS10200_4-4_DEL_SCREEN-LIST
Parameter Name Description RangeDefault Value Type Class
CSDL Commands
Service Definition 3-43
3.1.42.1 Mapping to ASDLsThe following table illustrates the CSDL to ASDL mapping for this service.
3.1.43 C_CSCO-BTS10200_4-4_DEL_SUBSCRIBER-FEATURESDelete subscriber features.
3.1.43.1 Mapping to ASDLsThe following table illustrates the CSDL to ASDL mapping for this service.
TARGET ID of the media where the transaction resides.
N/A N/A S O
TIMESTAMP Day and time of the transaction. N/A N/A S O
TRANSACTION_ID Transaction ID returned by NE after MML command is processed.
N/A N/A C O
Table 3–85 CSDL to ASDL Mapping
CSDL ASDL
C_CSCO-BTS10200_4-4_DEL_SUBSCRIBER A_CSCO-BTS10200_4-4_QRY_SUBSCRIBER-ROLLBACK
C_CSCO-BTS10200_4-4_DEL_SUBSCRIBER A_CSCO-BTS10200_4-4_DEL_SUBSCRIBER
C_CSCO-BTS10200_4-4_DEL_SUBSCRIBER A_CSCO-BTS10200_4-4_SHOW_TRANSACTION-QUEUE
Table 3–86 C_CSCO-BTS10200_4-4_DEL_SUBSCRIBER-FEATURES
Parameter Name Description RangeDefault Value Type Class
ACTIVE_TARGET Specifies if the target is in active or stanby state (Y/N).
N/A N/A S O
ASDL_COUNTER ASDL sequence number in CSDL. For internal processing use only.
N/A N/A S O
FEATURE_NAME Feature name. N/A N/A S O
NE_ID_CSCO-BTS10200_4-4
Host NE identifier. N/A N/A S R
SEQUENCE_NUM Numerical representation of the order of the stateminet in the transaction.
N/A N/A S O
STATEMENT Oracle and DBM SQL statement applied to the transaction.
N/A N/A S O
SUB_ID Subscriber ID. N/A N/A S R
TARGET ID of the media where the transaction resides.
N/A N/A S O
TIMESTAMP Day and time of the transaction. N/A N/A S O
TRANSACTION_ID Transaction ID returned by NE after MML command is processed.
N/A N/A C O
Table 3–84 (Cont.) C_CSCO-BTS10200_4-4_DEL_SUBSCRIBER
Parameter Name Description RangeDefault Value Type Class
CSDL Commands
3-44 Product Title/BookTitle as a Variable
3.1.44 C_CSCO-BTS10200_4-4_DEL_SUBSCRIBER-PROFILEDelete a subscriber profile.
3.1.44.1 Mapping to ASDLsThe following table illustrates the CSDL to ASDL mapping for this service.
3.1.45 C_CSCO-BTS10200_4-4_DEL_SUBSCRIBER-SERVICE-PROFILEDelete a subscriber service profile.
Table 3–87 CSDL to ASDL Mapping
CSDL ASDL
C_CSCO-BTS10200_4-4_DEL_SUBSCRIBER-FEATURES
A_CSCO-BTS10200_4-4_QRY_SUBSCRIBER-FEATURES-ROLLBACK
C_CSCO-BTS10200_4-4_DEL_SUBSCRIBER-FEATURES
A_CSCO-BTS10200_4-4_DEL_SUBSCRIBER-FEATURES
C_CSCO-BTS10200_4-4_DEL_SUBSCRIBER-FEATURES
A_CSCO-BTS10200_4-4_SHOW_TRANSACTION-QUEUE
Table 3–88 C_CSCO-BTS10200_4-4_DEL_SUBSCRIBER-PROFILE
Parameter Name Description RangeDefault Value Type Class
ACTIVE_TARGET Specifies if the target is in active or stanby state (Y/N).
N/A N/A S O
ASDL_COUNTER ASDL sequence number in CSDL. For internal processing use only.
N/A N/A S O
NE_ID_CSCO-BTS10200_4-4
Host NE identifier. N/A N/A S R
SEQUENCE_NUM Numerical representation of the order of the stateminet in the transaction.
N/A N/A S O
STATEMENT Oracle and DBM SQL statement applied to the transaction.
N/A N/A S O
SUB_PROFILE_ID Subscriber profile ID. N/A N/A S R
TARGET ID of the media where the transaction resides.
N/A N/A S O
TIMESTAMP Day and time of the transaction. N/A N/A S O
TRANSACTION_ID Transaction ID returned by NE after MML command is processed.
N/A N/A C O
Table 3–89 CSDL to ASDL Mapping
CSDL ASDL
C_CSCO-BTS10200_4-4_DEL_SUBSCRIBER-PROFILE A_CSCO-BTS10200_4-4_QRY_SUBSCRIBER-PROFILE-ROLLBACK
C_CSCO-BTS10200_4-4_DEL_SUBSCRIBER-PROFILE A_CSCO-BTS10200_4-4_DEL_SUBSCRIBER-PROFILE
C_CSCO-BTS10200_4-4_DEL_SUBSCRIBER-PROFILE A_CSCO-BTS10200_4-4_SHOW_TRANSACTION-QUEUE
CSDL Commands
Service Definition 3-45
3.1.45.1 Mapping to ASDLsThe following table illustrates the CSDL to ASDL mapping for this service.
3.1.46 C_CSCO-BTS10200_4-4_DEL_SUBSCRIBER-TIME-OF-DAYDelete a subscriber time of day.
Table 3–90 C_CSCO-BTS10200_4-4_DEL_SUBSCRIBER-SERVICE-PROFILE
Parameter Name Description RangeDefault Value Type Class
ACTIVE_TARGET Specifies if the target is in active or stanby state (Y/N).
N/A N/A S O
ASDL_COUNTER ASDL sequence number in CSDL. For internal processing use only.
N/A N/A S O
NE_ID_CSCO-BTS10200_4-4
Host NE identifier. N/A N/A S R
SEQUENCE_NUM Numerical representation of the order of the stateminet in the transaction.
N/A N/A S O
SERVICE_ID Service ID. N/A N/A S O
STATEMENT Oracle and DBM SQL statement applied to the transaction.
N/A N/A S O
SUB_ID Subscriber ID. N/A N/A S R
TARGET ID of the media where the transaction resides.
N/A N/A S O
TIMESTAMP Day and time of the transaction. N/A N/A S O
TRANSACTION_ID Transaction ID returned by NE after MML command is processed.
N/A N/A C O
Table 3–91 CSDL to ASDL Mapping
CSDL ASDL
C_CSCO-BTS10200_4-4_DEL_SUBSCRIBER-SERVICE-PROFILE
A_CSCO-BTS10200_4-4_QRY_SUBSCRIBER-SERVICE-PROFILE-ROLLBACK
C_CSCO-BTS10200_4-4_DEL_SUBSCRIBER-SERVICE-PROFILE
A_CSCO-BTS10200_4-4_DEL_SUBSCRIBER-SERVICE-PROFILE
C_CSCO-BTS10200_4-4_DEL_SUBSCRIBER-SERVICE-PROFILE
A_CSCO-BTS10200_4-4_SHOW_TRANSACTION-QUEUE
Table 3–92 C_CSCO-BTS10200_4-4_DEL_SUBSCRIBER-TIME-OF-DAY
Parameter Name Description RangeDefault Value Type Class
ACTIVE_TARGET Specifies if the target is in active or stanby state (Y/N).
N/A N/A S O
ASDL_COUNTER ASDL sequence number in CSDL. For internal processing use only.
N/A N/A S O
NE_ID_CSCO-BTS10200_4-4
Host NE identifier. N/A N/A S R
SEQUENCE_NUM Numerical representation of the order of the stateminet in the transaction.
N/A N/A S O
CSDL Commands
3-46 Product Title/BookTitle as a Variable
3.1.46.1 Mapping to ASDLsThe following table illustrates the CSDL to ASDL mapping for this service.
3.1.47 C_CSCO-BTS10200_4-4_DEL_TERMINATIONDelete a termination.
STATEMENT Oracle and DBM SQL statement applied to the transaction.
N/A N/A S O
SUB_ID Subscriber ID. N/A N/A S R
TARGET ID of the media where the transaction resides.
N/A N/A S O
TIMESTAMP Day and time of the transaction. N/A N/A S O
TRANSACTION_ID Transaction ID returned by NE after MML command is processed.
N/A N/A C O
Table 3–93 CSDL to ASDL Mapping
CSDL ASDL
C_CSCO-BTS10200_4-4_DEL_SUBSCRIBER-TIME-OF-DAY
A_CSCO-BTS10200_4-4_QRY_SUBSCRIBER-TIME-OF-DAY-ROLLBACK
C_CSCO-BTS10200_4-4_DEL_SUBSCRIBER-TIME-OF-DAY
A_CSCO-BTS10200_4-4_DEL_SUBSCRIBER-TIME-OF-DAY
C_CSCO-BTS10200_4-4_DEL_SUBSCRIBER-TIME-OF-DAY
A_CSCO-BTS10200_4-4_SHOW_TRANSACTION-QUEUE
Table 3–94 C_CSCO-BTS10200_4-4_DEL_TERMINATION
Parameter Name Description RangeDefault Value Type Class
ACTIVE_TARGET Specifies if the target is in active or stanby state (Y/N).
N/A N/A S O
ASDL_COUNTER ASDL sequence counter in CSDL. For internal processing use only.
N/A N/A S O
MGW_ID ID of the media gateway(1-32 ASCII characters).
N/A N/A S O
NE_ID_CSCO-BTS10200_4-4
Host NE Identifier N/A N/A S R
PORT_END Port number start N/A N/A S R
PORT_START User assigned token id N/A N/A S R
PREFIX N/A N/A S R
SEQUENCE_NUM Numerical representation of the order of the stateminet in the transaction.
N/A N/A S O
STATEMENT Oracle and DBM SQL statement applied to the transaction.
N/A N/A S O
TARGET ID of the media where the transaction resides.
N/A N/A S O
Table 3–92 (Cont.) C_CSCO-BTS10200_4-4_DEL_SUBSCRIBER-TIME-OF-DAY
Parameter Name Description RangeDefault Value Type Class
CSDL Commands
Service Definition 3-47
3.1.47.1 Mapping to ASDLsThe following table illustrates the CSDL to ASDL mapping for this service.
3.1.48 C_CSCO-BTS10200_4-4_DEL_TWO-DIGIT-SPEED-CALLDelete a speed call two digit.
TERMINATION_ID The termination identifier. N/A N/A S R
TIMESTAMP Day and time of the transaction. N/A N/A S O
TRANSACTION_ID Transaction ID returned by NE after processing MML command.
N/A N/A C O
Table 3–95 CSDL to ASDL Mapping
CSDL ASDL
C_CSCO-BTS10200_4-4_DEL_TERMINATION A_CSCO-BTS10200_4-4_QRY_TERMINATION-ROLLBACK
C_CSCO-BTS10200_4-4_DEL_TERMINATION A_CSCO-BTS10200_4-4_DEL_TERMINATION
C_CSCO-BTS10200_4-4_DEL_TERMINATION A_CSCO-BTS10200_4-4_SHOW_TRANSACTION-QUEUE
Table 3–96 C_CSCO-BTS10200_4-4_DEL_TWO-DIGIT-SPEED-CALL
Parameter Name Description RangeDefault Value Type Class
ACTIVE_TARGET Specifies if the target is in active or stanby state (Y/N).
N/A N/A S O
ASDL_COUNTER ASDL sequence number in CSDL. For internal processing use only.
N/A N/A S O
DN20 Directory number. N/A N/A S O
DN21 Directory number. N/A N/A S O
DN22 Directory number. N/A N/A S O
DN23 Directory number. N/A N/A S O
DN24 Directory number. N/A N/A S O
DN25 Directory number. N/A N/A S O
DN26 Directory number. N/A N/A S O
DN27 Directory number. N/A N/A S O
DN28 Directory number. N/A N/A S O
DN29 Directory number. N/A N/A S O
DN30 Directory number. N/A N/A S O
DN31 Directory number. N/A N/A S O
DN32 Directory number. N/A N/A S O
DN33 Directory number. N/A N/A S O
DN34 Directory number. N/A N/A S O
Table 3–94 (Cont.) C_CSCO-BTS10200_4-4_DEL_TERMINATION
Parameter Name Description RangeDefault Value Type Class
CSDL Commands
3-48 Product Title/BookTitle as a Variable
3.1.48.1 Mapping to ASDLsThe following table illustrates the CSDL to ASDL mapping for this service.
DN35 Directory number. N/A N/A S O
DN36 Directory number. N/A N/A S O
DN37 Directory number. N/A N/A S O
DN38 Directory number. N/A N/A S O
DN39 Directory number. N/A N/A S O
DN40 Directory number. N/A N/A S O
DN41 Directory number. N/A N/A S O
DN42 Directory number. N/A N/A S O
DN43 Directory number. N/A N/A S O
DN44 Directory number. N/A N/A S O
DN45 Directory number. N/A N/A S O
DN46 Directory number. N/A N/A S O
DN47 Directory number. N/A N/A S O
DN48 Directory number. N/A N/A S O
DN49 Directory number. N/A N/A S O
NE_ID_CSCO-BTS10200_4-4
Host NE identifier. N/A N/A S R
SEQUENCE_NUM Numerical representation of the order of the stateminet in the transaction.
N/A N/A S O
STATEMENT Oracle and DBM SQL statement applied to the transaction.
N/A N/A S O
SUB_ID Subscriber ID. N/A N/A S R
TARGET ID of the media where the transaction resides.
N/A N/A S O
TIMESTAMP Day and time of the transaction. N/A N/A S O
TRANSACTION_ID Transaction ID returned by NE after MML command is processed.
N/A N/A C O
Table 3–97 CSDL to ASDL Mapping
CSDL ASDL
C_CSCO-BTS10200_4-4_DEL_TWO-DIGIT-SPEED-CALL
A_CSCO-BTS10200_4-4_QRY_TWO-DIGIT-SPEED-CALL-ROLLBACK
C_CSCO-BTS10200_4-4_DEL_TWO-DIGIT-SPEED-CALL
A_CSCO-BTS10200_4-4_DEL_TWO-DIGIT-SPEED-CALL
C_CSCO-BTS10200_4-4_DEL_TWO-DIGIT-SPEED-CALL
A_CSCO-BTS10200_4-4_SHOW_TRANSACTION-QUEUE
Table 3–96 (Cont.) C_CSCO-BTS10200_4-4_DEL_TWO-DIGIT-SPEED-CALL
Parameter Name Description RangeDefault Value Type Class
CSDL Commands
Service Definition 3-49
3.1.49 C_CSCO-BTS10200_4-4_DEL_USER-AUTHENTICATIONDelete a user authentication .
3.1.49.1 Mapping to ASDLsThe following table illustrates the CSDL to ASDL mapping for this service.
3.1.50 C_CSCO-BTS10200_4-4_EQUIP_SUBSCRIBER-TERMINATIONEquip a subscriber-termination.
Table 3–98 C_CSCO-BTS10200_4-4_DEL_USER-AUTHENTICATION
Parameter Name Description RangeDefault Value Type Class
ACTIVE_TARGET Specifies if the target is in active or stanby state (Y/N).
N/A N/A S O
AOR_ID Address of record id N/A N/A S O
ASDL_COUNTER ASDL sequence counter in CSDL. For internal processing use only.
N/A N/A S O
AUTH_REALM_ID authentication realm id N/A N/A S O
AUTH_USER authentication user name. N/A N/A S R
NE_ID_CSCO-BTS10200_4-4
Host NE Identifier N/A N/A S R
SEQUENCE_NUM Numerical representation of the order of the stateminet in the transaction.
N/A N/A S O
STATEMENT Oracle and DBM SQL statement applied to the transaction.
N/A N/A S O
TARGET ID of the media where the transaction resides.
N/A N/A S O
TIMESTAMP Day and time of the transaction. N/A N/A S O
TRANSACTION_ID Transaction ID returned by NE after processing MML command.
N/A N/A C O
Table 3–99 CSDL to ASDL Mapping
CSDL ASDL
C_CSCO-BTS10200_4-4_DEL_USER-AUTHENTICATION
A_CSCO-BTS10200_4-4_QRY_USER-AUTHENTICATION-ROLLBACK
C_CSCO-BTS10200_4-4_DEL_USER-AUTHENTICATION
A_CSCO-BTS10200_4-4_DEL_USER-AUTHENTICATION
C_CSCO-BTS10200_4-4_DEL_USER-AUTHENTICATION
A_CSCO-BTS10200_4-4_SHOW_TRANSACTION-QUEUE
Table 3–100 C_CSCO-BTS10200_4-4_EQUIP_SUBSCRIBER-TERMINATION
Parameter Name Description RangeDefault Value Type Class
NE_ID_CSCO-BTS10200_4-4
Host NE Identifier N/A N/A S R
SUBSCRIBER_TERMINATION_ID
Subscriber termination Id on a particular gateway.
N/A N/A S R
CSDL Commands
3-50 Product Title/BookTitle as a Variable
3.1.50.1 Mapping to ASDLsThe following table illustrates the CSDL to ASDL mapping for this service.
3.1.51 C_CSCO-BTS10200_4-4_MOD_AOR-TO-SUBSCRIBERModify a address of record to subscriber.
3.1.51.1 Mapping to ASDLsThe following table illustrates the CSDL to ASDL mapping for this service.
3.1.52 C_CSCO-BTS10200_4-4_MOD_AUTHORIZATION-CODEModify an authorization code.
Table 3–101 CSDL to ASDL Mapping
CSDL ASDL
C_CSCO-BTS10200_4-4_EQUIP_SUBSCRIBER-TERMINATION
A_CSCO-BTS10200_4-4_EQUIP_SUBSCRIBER-TERMINATION
Table 3–102 C_CSCO-BTS10200_4-4_MOD_AOR-TO-SUBSCRIBER
Parameter Name Description RangeDefault Value Type Class
ACTIVE_TARGET Specifies if the target is in active or stanby state (Y/N).
N/A N/A S O
AOR_ID Address of record id for the subscriber. N/A N/A S O
ASDL_COUNTER ASDL sequence counter in CSDL. For internal processing use only.
N/A N/A S O
NE_ID_CSCO-BTS10200_4-4
Host NE Identifier N/A N/A S R
SEQUENCE_NUM Numerical representation of the order of the stateminet in the transaction.
N/A N/A S O
STATEMENT Oracle and DBM SQL statement applied to the transaction.
N/A N/A S O
SUB_ID Subscriber ID N/A N/A S O
TARGET ID of the media where the transaction resides.
N/A N/A S O
TIMESTAMP Day and time of the transaction. N/A N/A S O
TRANSACTION_ID Transaction ID returned by NE after processing MML command.
N/A N/A C O
Table 3–103 CSDL to ASDL Mapping
CSDL ASDL
C_CSCO-BTS10200_4-4_MOD_AOR-TO-SUBSCRIBER A_CSCO-BTS10200_4-4_QRY_AOR-TO-SUBSCRIBER-ROLLBACK
C_CSCO-BTS10200_4-4_MOD_AOR-TO-SUBSCRIBER A_CSCO-BTS10200_4-4_MOD_AOR-TO-SUBSCRIBER
C_CSCO-BTS10200_4-4_MOD_AOR-TO-SUBSCRIBER A_CSCO-BTS10200_4-4_SHOW_TRANSACTION-QUEUE
CSDL Commands
Service Definition 3-51
3.1.52.1 Mapping to ASDLsThe following table illustrates the CSDL to ASDL mapping for this service.
3.1.53 C_CSCO-BTS10200_4-4_MOD_AUTHORIZATION-CODE-GROUPModify an authorization code group.
Table 3–104 C_CSCO-BTS10200_4-4_MOD_AUTHORIZATION-CODE
Parameter Name Description RangeDefault Value Type Class
ACTIVE_TARGET Specifies if the target is in active or stanby state (Y/N).
N/A N/A S O
ASDL_COUNTER ASDL sequence number in CSDL. For internal processing use only.
N/A N/A S O
AUTH_ACTIVE Indicates status of the authorization code.
N/A N/A S O
AUTH_CODE_GROUP_ID
Authorization code group ID. N/A N/A S R
AUTH_ID Dialed authorization code. N/A N/A S R
COS_RESTRICT_ID Class of service restriction ID. N/A N/A S O
NE_ID_CSCO-BTS10200_4-4
Host NE identifier. N/A N/A S R
SEQUENCE_NUM Numerical representation of the order of the stateminet in the transaction.
N/A N/A S O
STATEMENT Oracle and DBM SQL statement applied to the transaction.
N/A N/A S O
TARGET ID of the media where the transaction resides.
N/A N/A S O
TIMESTAMP Day and time of the transaction. N/A N/A S O
TRANSACTION_ID Transaction ID returned by NE after MML command is processed.
N/A N/A C O
Table 3–105 CSDL to ASDL Mapping
CSDL ASDL
C_CSCO-BTS10200_4-4_MOD_AUTHORIZATION-CODE
A_CSCO-BTS10200_4-4_QRY_AUTHORIZATION-CODE-ROLLBACK
C_CSCO-BTS10200_4-4_MOD_AUTHORIZATION-CODE
A_CSCO-BTS10200_4-4_MOD_AUTHORIZATION-CODE
C_CSCO-BTS10200_4-4_MOD_AUTHORIZATION-CODE
A_CSCO-BTS10200_4-4_SHOW_TRANSACTION-QUEUE
CSDL Commands
3-52 Product Title/BookTitle as a Variable
3.1.53.1 Mapping to ASDLsThe following table illustrates the CSDL to ASDL mapping for this service.
3.1.54 C_CSCO-BTS10200_4-4_MOD_CHANGED-NUMBERModify a changed number.
Table 3–106 C_CSCO-BTS10200_4-4_MOD_AUTHORIZATION-CODE-GROUP
Parameter Name Description RangeDefault Value Type Class
ACTIVE_TARGET Specifies if the target is in active or stanby state (Y/N).
N/A N/A S O
ASDL_COUNTER ASDL sequence number in CSDL. For internal processing use only.
N/A N/A S O
AUTH_CODE_GROUP_ID
Authorization code group ID. N/A N/A S R
DESCRIPTION Service provider's description of authorization code.
N/A N/A S O
NE_ID_CSCO-BTS10200_4-4
Host NE identifier. N/A N/A S R
SEQUENCE_NUM Numerical representation of the order of the stateminet in the transaction.
N/A N/A S O
STATEMENT Oracle and DBM SQL statement applied to the transaction.
N/A N/A S O
TARGET ID of the media where the transaction resides.
N/A N/A S O
TIMESTAMP Day and time of the transaction. N/A N/A S O
TRANSACTION_ID Transaction ID returned by NE after MML command is processed.
N/A N/A C O
Table 3–107 CSDL to ASDL Mapping
CSDL ASDL
C_CSCO-BTS10200_4-4_MOD_AUTHORIZATION-CODE-GROUP
A_CSCO-BTS10200_4-4_QRY_AUTHORIZATION-CODE-GROUP-ROLLBACK
C_CSCO-BTS10200_4-4_MOD_AUTHORIZATION-CODE-GROUP
A_CSCO-BTS10200_4-4_MOD_AUTHORIZATION-CODE-GROUP
C_CSCO-BTS10200_4-4_MOD_AUTHORIZATION-CODE-GROUP
A_CSCO-BTS10200_4-4_SHOW_TRANSACTION-QUEUE
Table 3–108 C_CSCO-BTS10200_4-4_MOD_CHANGED-NUMBER
Parameter Name Description RangeDefault Value Type Class
ACTIVE_TARGET Specifies if the target is in active or stanby state (Y/N).
N/A N/A S O
ASDL_COUNTER ASDL sequence number in CSDL. For internal processing use only.
N/A N/A S O
NEW_DN The changed or new subscriber DN. N/A N/A S R
NE_ID_CSCO-BTS10200_4-4
Host NE identifier. N/A N/A S R
CSDL Commands
Service Definition 3-53
3.1.54.1 Mapping to ASDLsThe following table illustrates the CSDL to ASDL mapping for this service.
3.1.55 C_CSCO-BTS10200_4-4_MOD_DN-TO-SUBSCRIBERModify a DN2Subscriber.
OLD_DN The old subscriber directory number. N/A N/A S R
SEQUENCE_NUM Numerical representation of the order of the stateminet in the transaction.
N/A N/A S O
STATEMENT Oracle and DBM SQL statement applied to the transaction.
N/A N/A S O
TARGET ID of the media where the transaction resides.
N/A N/A S O
TIMESTAMP Day and time of the transaction. N/A N/A S O
TRANSACTION_ID Transaction ID returned by NE after MML command is processed.
N/A N/A C O
Table 3–109 CSDL to ASDL Mapping
CSDL ASDL
C_CSCO-BTS10200_4-4_MOD_CHANGED-NUMBER A_CSCO-BTS10200_4-4_QRY_CHANGED-NUMBER-ROLLBACK
C_CSCO-BTS10200_4-4_MOD_CHANGED-NUMBER A_CSCO-BTS10200_4-4_MOD_CHANGED-NUMBER
C_CSCO-BTS10200_4-4_MOD_CHANGED-NUMBER A_CSCO-BTS10200_4-4_SHOW_TRANSACTION-QUEUE
Table 3–110 C_CSCO-BTS10200_4-4_MOD_DN-TO-SUBSCRIBER
Parameter Name Description RangeDefault Value Type Class
ACTIVE_TARGET Specifies if the target is in active or stanby state (Y/N).
N/A N/A S O
ANOUNCEMENT_ID Announcement ID. N/A N/A S O
ASDL_COUNTER ASDL sequence number in CSDL. For internal processing use only.
N/A N/A S O
DN Directory number assigned to a subscriber.
N/A N/A S O
DN2SUB_STATUS Status. N/A N/A S R
FDN Full directory number. N/A N/A S O
FROM_DN From directory number. N/A N/A S O
LNP_TRIGGER Local number portability query. N/A N/A S O
NE_ID_CSCO-BTS10200_4-4
Host NE identifier. N/A N/A S R
NP_RESERVED Local number portability and number pooling.
N/A N/A S O
Table 3–108 (Cont.) C_CSCO-BTS10200_4-4_MOD_CHANGED-NUMBER
Parameter Name Description RangeDefault Value Type Class
CSDL Commands
3-54 Product Title/BookTitle as a Variable
3.1.55.1 Mapping to ASDLsThe following table illustrates the CSDL to ASDL mapping for this service.
3.1.56 C_CSCO-BTS10200_4-4_MOD_MAC-TO-SUBSCRIBERModify a MAC address to subscriber.
OFFICE_CODE_INDEX
Office code index. N/A N/A S O
SEQUENCE_NUM Numerical representation of the order of the stateminet in the transaction.
N/A N/A S O
STATEMENT Oracle and DBM SQL statement applied to the transaction.
N/A N/A S O
SUB_ID Subscriber ID of the calling directory number.
N/A N/A S O
TARGET ID of the media where the transaction resides.
N/A N/A S O
TIMESTAMP Day and time of the transaction. N/A N/A S O
TO_DN To directory number. N/A N/A S O
TRANSACTION_ID Transaction ID returned by NE after MML command is processed.
N/A N/A C O
Table 3–111 CSDL to ASDL Mapping
CSDL ASDL
C_CSCO-BTS10200_4-4_MOD_DN-TO-SUBSCRIBER A_CSCO-BTS10200_4-4_QRY_DN-TO-SUBSCRIBER-ROLLBACK
C_CSCO-BTS10200_4-4_MOD_DN-TO-SUBSCRIBER A_CSCO-BTS10200_4-4_MOD_DN-TO-SUBSCRIBER
C_CSCO-BTS10200_4-4_MOD_DN-TO-SUBSCRIBER A_CSCO-BTS10200_4-4_SHOW_TRANSACTION-QUEUE
Table 3–112 C_CSCO-BTS10200_4-4_MOD_MAC-TO-SUBSCRIBER
Parameter Name Description RangeDefault Value Type Class
ACTIVE_TARGET Specifies if the target is in active or stanby state (Y/N).
N/A N/A S O
ASDL_COUNTER ASDL sequence counter in CSDL. For internal processing use only.
N/A N/A S O
MAC_ID Mac Address N/A N/A S O
NE_ID_CSCO-BTS10200_4-4
Host NE Identifier N/A N/A S R
SEQUENCE_NUM Numerical representation of the order of the stateminet in the transaction.
N/A N/A S O
STATEMENT Oracle and DBM SQL statement applied to the transaction.
N/A N/A S O
SUB_ID Subscriber ID. N/A N/A S O
Table 3–110 (Cont.) C_CSCO-BTS10200_4-4_MOD_DN-TO-SUBSCRIBER
Parameter Name Description RangeDefault Value Type Class
CSDL Commands
Service Definition 3-55
3.1.56.1 Mapping to ASDLsThe following table illustrates the CSDL to ASDL mapping for this service.
3.1.57 C_CSCO-BTS10200_4-4_MOD_MGPModify a media gateway provisioning.
TARGET ID of the media where the transaction resides.
N/A N/A S O
TIMESTAMP Day and time of the transaction. N/A N/A S O
TRANSACTION_ID Transaction ID returned by NE after processing MML command.
N/A N/A C O
Table 3–113 CSDL to ASDL Mapping
CSDL ASDL
C_CSCO-BTS10200_4-4_MOD_MAC-TO-SUBSCRIBER A_CSCO-BTS10200_4-4_QRY_MAC-TO-SUBSCRIBER-ROLLBACK
C_CSCO-BTS10200_4-4_MOD_MAC-TO-SUBSCRIBER A_CSCO-BTS10200_4-4_MOD_MAC-TO-SUBSCRIBER
C_CSCO-BTS10200_4-4_MOD_MAC-TO-SUBSCRIBER A_CSCO-BTS10200_4-4_SHOW_TRANSACTION-QUEUE
Table 3–114 C_CSCO-BTS10200_4-4_MOD_MGP
Parameter Name Description RangeDefault Value Type Class
ACTIVE_TARGET Specifies if the target is in active or stanby state (Y/N).
N/A N/A S O
ASDL_COUNTER ASDL sequence counter in CSDL. For internal processing use only.
N/A N/A S O
IP_ADDR IP address of the device. N/A N/A S R
MGP_PASSWORD Password used to access the gateway. N/A N/A S R
MGP_TYPE Type of gateway. N/A N/A S R
NE_ID_CSCO-BTS10200_4-4
Host NE identifier. N/A N/A S R
SEQUENCE_NUM Numerical representation of the order of the stateminet in the transaction.
N/A N/A S O
STATEMENT Oracle and DBM SQL statement applied to the transaction.
N/A N/A S O
TARGET ID of the media where the transaction resides.
N/A N/A S O
TIMESTAMP Day and time of the transaction. N/A N/A S O
TRANSACTION_ID Transaction ID returned by NE after processing MML command.
N/A N/A C O
USER_NAME User name used to access the gateway. N/A N/A S R
Table 3–112 (Cont.) C_CSCO-BTS10200_4-4_MOD_MAC-TO-SUBSCRIBER
Parameter Name Description RangeDefault Value Type Class
CSDL Commands
3-56 Product Title/BookTitle as a Variable
3.1.57.1 Mapping to ASDLsThe following table illustrates the CSDL to ASDL mapping for this service.
3.1.58 C_CSCO-BTS10200_4-4_MOD_MGWModify a media gateway.
Table 3–115 CSDL to ASDL Mapping
CSDL ASDL
C_CSCO-BTS10200_4-4_MOD_MGP A_CSCO-BTS10200_4-4_QRY_MGP-ROLLBACK
C_CSCO-BTS10200_4-4_MOD_MGP A_CSCO-BTS10200_4-4_MOD_MGP
C_CSCO-BTS10200_4-4_MOD_MGP A_CSCO-BTS10200_4-4_SHOW_TRANSACTION-QUEUE
Table 3–116 C_CSCO-BTS10200_4-4_MOD_MGW
Parameter Name Description RangeDefault Value Type Class
ACTIVE_TARGET Specifies if the target is in active or stanby state (Y/N).
N/A N/A S O
AGGR_ID ID of the aggregation devic cable modem termination system (1-16 ASCII characters).
N/A N/A S O
ASDL_COUNTER ASDL sequence counter in CSDL. For internal processing use only.
N/A N/A S O
CALL_AGENT_CONTROL_PORT
Call Agent MGCP listening port for the MGW.
N/A N/A S O
CALL_AGENT_ID ID of the call-agent the subscriber is assigned to in the Call Agent table (1-16 ASCII characters).
N/A N/A S O
MGW_ID The media gateway identifier (1-32 ASCII characters).
N/A N/A S R
MGW_PROFILE_ID ID of the mgw-profile the subscriber is assigned to in the MGW Profile table (1-16 ASCII characters).
N/A N/A S O
MGW_STATUS Service state of the MGW. N/A N/A S O
MGW_TYPE Type of gateway. N/A N/A S O
NE_ID_CSCO-BTS10200_4-4
Host NE Identifier N/A N/A S R
SEQUENCE_NUM Numerical representation of the order of the stateminet in the transaction.
N/A N/A S O
STATEMENT Oracle and DBM SQL statement applied to the transaction.
N/A N/A S O
TARGET ID of the media where the transaction resides.
N/A N/A S O
CSDL Commands
Service Definition 3-57
3.1.58.1 Mapping to ASDLsThe following table illustrates the CSDL to ASDL mapping for this service.
3.1.59 C_CSCO-BTS10200_4-4_MOD_ONE-DIGIT-SPEED-CALLModify a speed call one digit.
TIMESTAMP Day and time of the transaction. N/A N/A S O
TRANSACTION_ID Transaction ID returned by NE after processing MML command.
N/A N/A C O
TSAP_ADDR Domain name, IP address or IP address and port number of the device to manage. (1-64 ASCII characters)
N/A N/A S O
Table 3–117 CSDL to ASDL Mapping
CSDL ASDL
C_CSCO-BTS10200_4-4_MOD_MGW A_CSCO-BTS10200_4-4_QRY_MGW-ROLLBACK
C_CSCO-BTS10200_4-4_MOD_MGW A_CSCO-BTS10200_4-4_MOD_MGW
C_CSCO-BTS10200_4-4_MOD_MGW A_CSCO-BTS10200_4-4_SHOW_TRANSACTION-QUEUE
Table 3–118 C_CSCO-BTS10200_4-4_MOD_ONE-DIGIT-SPEED-CALL
Parameter Name Description RangeDefault Value Type Class
ACTIVE_TARGET Specifies if the target is in active or stanby state (Y/N).
N/A N/A S O
ASDL_COUNTER ASDL sequence number in CSDL. For internal processing use only.
N/A N/A S O
DN2 Directory number. N/A N/A S O
DN3 Directory number. N/A N/A S O
DN4 Directory number. N/A N/A S O
DN5 Directory number. N/A N/A S O
DN6 Directory number. N/A N/A S O
DN7 Directory number. N/A N/A S O
DN8 Directory number. N/A N/A S O
DN9 Directory number. N/A N/A S O
NE_ID_CSCO-BTS10200_4-4
Host NE identifier. N/A N/A S R
SEQUENCE_NUM Numerical representation of the order of the stateminet in the transaction.
N/A N/A S O
STATEMENT Oracle and DBM SQL statement applied to the transaction.
N/A N/A S O
SUB_ID Subscriber ID. N/A N/A S R
Table 3–116 (Cont.) C_CSCO-BTS10200_4-4_MOD_MGW
Parameter Name Description RangeDefault Value Type Class
CSDL Commands
3-58 Product Title/BookTitle as a Variable
3.1.59.1 Mapping to ASDLsThe following table illustrates the CSDL to ASDL mapping for this service.
3.1.60 C_CSCO-BTS10200_4-4_MOD_SCREEN-LISTModify a screening list editing.
TARGET ID of the media where the transaction resides.
N/A N/A S O
TIMESTAMP Day and time of the transaction. N/A N/A S O
TRANSACTION_ID Transaction ID returned by NE after MML command is processed.
N/A N/A C O
Table 3–119 CSDL to ASDL Mapping
CSDL ASDL
C_CSCO-BTS10200_4-4_MOD_ONE-DIGIT-SPEED-CALL
A_CSCO-BTS10200_4-4_QRY_ONE-DIGIT-SPEED-CALL-ROLLBACK
C_CSCO-BTS10200_4-4_MOD_ONE-DIGIT-SPEED-CALL
A_CSCO-BTS10200_4-4_MOD_ONE-DIGIT-SPEED-CALL
C_CSCO-BTS10200_4-4_MOD_ONE-DIGIT-SPEED-CALL
A_CSCO-BTS10200_4-4_SHOW_TRANSACTION-QUEUE
Table 3–120 C_CSCO-BTS10200_4-4_MOD_SCREEN-LIST
Parameter Name Description RangeDefault Value Type Class
ACTIVE_TARGET Specifies if the target is in active or stanby state (Y/N).
N/A N/A S O
ANONYMOUS Anonymous entry. Permitted values are: Y/N.
N/A N/A S O
ASDL_COUNTER ASDL sequence number in CSDL. For internal processing use only.
N/A N/A S O
DN Directory number entry. N/A N/A S O
FEATURE_NAME Type of screening feature. N/A N/A S O
NE_ID_CSCO-BTS10200_4-4
Host NE identifier. N/A N/A S R
SEQUENCE_NUM Numerical representation of the order of the stateminet in the transaction.
N/A N/A S O
STATEMENT Oracle and DBM SQL statement applied to the transaction.
N/A N/A S O
SUB_ID Subscriber ID from the subscriber. N/A N/A S R
Table 3–118 (Cont.) C_CSCO-BTS10200_4-4_MOD_ONE-DIGIT-SPEED-CALL
Parameter Name Description RangeDefault Value Type Class
CSDL Commands
Service Definition 3-59
3.1.60.1 Mapping to ASDLsThe following table illustrates the CSDL to ASDL mapping for this service.
3.1.61 C_CSCO-BTS10200_4-4_MOD_SUBSCRIBERModify a subscriber.
TARGET ID of the media where the transaction resides.
N/A N/A S O
TIMESTAMP The date and time the entry was added. Integer values permitted from 1 to 9999.
N/A N/A S O
TRANSACTION_ID Transaction ID returned by NE after MML command is processed.
N/A N/A C O
Table 3–121 CSDL to ASDL Mapping
CSDL ASDL
C_CSCO-BTS10200_4-4_MOD_SCREEN-LIST A_CSCO-BTS10200_4-4_QRY_SCREEN-LIST-ROLLBACK
C_CSCO-BTS10200_4-4_MOD_SCREEN-LIST A_CSCO-BTS10200_4-4_MOD_SCREEN-LIST
C_CSCO-BTS10200_4-4_MOD_SCREEN-LIST A_CSCO-BTS10200_4-4_SHOW_TRANSACTION-QUEUE
Table 3–122 C_CSCO-BTS10200_4-4_MOD_SUBSCRIBER
Parameter Name Description RangeDefault Value Type Class
ACTIVE_TARGET Specifies if the target is in active or stanby state (Y/N).
N/A N/A S O
ADDRESS1 Address of the subscriber. N/A N/A S O
ADDRESS2 Address of the subscriber. N/A N/A S O
AOR_ID Address of the record ID. N/A N/A S O
ASDL_COUNTER ASDL sequence number in CSDL. For internal processing use only.
N/A N/A S O
BILLING_DN Billing DN. N/A N/A S O
BILLING_TYPE Subscriber billing type. N/A N/A S O
CATEGORY Subscriber category. N/A N/A S O
CITY City of the subscriber. N/A N/A S O
COS_RESTRICT_ID COS restriction ID. N/A N/A S O
COUNTRY Country of the subscriber. N/A N/A S O
CTXG_ID ID in the Centrex Group table. N/A N/A S O
DN1 Subscriber directory number (DN). N/A N/A S O
GROUP Group. N/A N/A S O
H323_TERM_ID The termination ID for an H323 terminal.
N/A N/A S O
Table 3–120 (Cont.) C_CSCO-BTS10200_4-4_MOD_SCREEN-LIST
Parameter Name Description RangeDefault Value Type Class
CSDL Commands
3-60 Product Title/BookTitle as a Variable
ID Subscriber ID. N/A N/A S R
IMMEDIATE_RELEASE
Immediate release procedure. N/A N/A S O
LANGUAGE Subscriber's preferred spoken language. N/A N/A S O
MAC_ID MAC ID for the subscriber. N/A N/A S O
MGW_ID Media gateway ID. N/A N/A S O
MLHG_ID Multiline Hunt Group ID. N/A N/A S O
MLHG_PREF_LIST_ID MLGH preference list ID. N/A N/A S O
MWI_ON Message waiting indicator on status. N/A N/A S O
NAME Subscriber name. N/A N/A S O
NE_ID_CSCO-BTS10200_4-4
Host NE identifier. N/A N/A S R
PIC1 Preferred interLATA carrier (PIC). N/A N/A S O
PIC2 Preferred interLATA carrier (PIC) 2. N/A N/A S O
PIC3 Preferred interLATA carrier (PIC) 3. N/A N/A S O
POLICY_ID Policy ID. N/A N/A S O
PORTED_IN Permitted values are: Y/N. N/A N/A S O
PRIVACY Privacy. N/A N/A S O
PRIVACY_MANAGER_ID
Privacy manager ID. N/A N/A S O
QOS_ID QOS index. N/A N/A S O
RING_TYPE_DN1 Ring type for DN1. N/A N/A S O
SEND_BDN_AS_CPN Send the billing DN of the subscriber as a CPN.
N/A N/A S O
SEND_BDN_FOREMG Send the billing. N/A N/A S O
SEQUENCE_NUM Numerical representation of the order of the stateminet in the transaction.
N/A N/A S O
STATE State designation. N/A N/A S O
STATEMENT Oracle and DBM SQL statement applied to the transaction.
N/A N/A S O
SUB_PROFILE_ID Subscriber profile ID. N/A N/A S O
SUB_STATUS Indicates the subscriber status. N/A N/A S O
TARGET ID of the media where the transaction resides.
N/A N/A S O
TERMINATING_IMMEDIATE_REL
Terminating immediate release. N/A N/A S O
TERM_ID Termination ID. N/A N/A S O
TERM_TYPE Termination type. N/A N/A S O
TIMESTAMP Day and time of the transaction. N/A N/A S O
Table 3–122 (Cont.) C_CSCO-BTS10200_4-4_MOD_SUBSCRIBER
Parameter Name Description RangeDefault Value Type Class
CSDL Commands
Service Definition 3-61
3.1.61.1 Mapping to ASDLsThe following table illustrates the CSDL to ASDL mapping for this service.
3.1.62 C_CSCO-BTS10200_4-4_MOD_SUBSCRIBER-FEATURESModify subscriber features.
TRANSACTION_ID Transaction ID returned by NE after MML command is processed.
N/A N/A C O
TRUNK_GROUP_ID Trunk group ID. N/A N/A S O
USAGE_SENSITIVE_FEATURE
Usage sensitive features. N/A N/A S O
VOICE_MAIL_ID Voice mail ID. N/A N/A S O
ZIPCODE Subscriber's zip code. N/A N/A S O
Table 3–123 CSDL to ASDL Mapping
CSDL ASDL
C_CSCO-BTS10200_4-4_MOD_SUBSCRIBER A_CSCO-BTS10200_4-4_QRY_SUBSCRIBER-ROLLBACK
C_CSCO-BTS10200_4-4_MOD_SUBSCRIBER A_CSCO-BTS10200_4-4_MOD_SUBSCRIBER
C_CSCO-BTS10200_4-4_MOD_SUBSCRIBER A_CSCO-BTS10200_4-4_SHOW_TRANSACTION-QUEUE
Table 3–124 C_CSCO-BTS10200_4-4_MOD_SUBSCRIBER-FEATURES
Parameter Name Description RangeDefault Value Type Class
ACTIVE Specifies if the sub ID is activated. N/A N/A C O
ACTIVE_TARGET Specifies if the target is in active or stanby state (Y/N).
N/A N/A S O
ASDL_COUNTER ASDL sequence number in CSDL. For internal processing use only.
N/A N/A S O
FEATURE_NAME Feature name. N/A N/A S O
NE_ID_CSCO-BTS10200_4-4
Host NE identifier. N/A N/A S R
SEQUENCE_NUM Numerical representation of the order of the stateminet in the transaction.
N/A N/A S O
STATEMENT Oracle and DBM SQL statement applied to the transaction.
N/A N/A S O
SUB_ID Subscriber ID. N/A N/A S R
TARGET ID of the media where the transaction resides.
N/A N/A S O
TIMESTAMP Day and time of the transaction. N/A N/A S O
TRANSACTION_ID Transaction ID returned by NE after MML command is processed.
N/A N/A C O
Table 3–122 (Cont.) C_CSCO-BTS10200_4-4_MOD_SUBSCRIBER
Parameter Name Description RangeDefault Value Type Class
CSDL Commands
3-62 Product Title/BookTitle as a Variable
3.1.62.1 Mapping to ASDLsThe following table illustrates the CSDL to ASDL mapping for this service.
3.1.63 C_CSCO-BTS10200_4-4_MOD_SUBSCRIBER-PROFILEModify a subscriber profile.
TYPE1 Feature data type 1. N/A N/A C O
TYPE2 Feature data type 2. N/A N/A C O
TYPE3 Feature data type 3. N/A N/A C O
TYPE4 Feature data type 4. N/A N/A C O
VALUE1 Value associated with data type defined in TYPE1.
N/A N/A C O
VALUE2 Value associated with data type defined in TYPE2.
N/A N/A C O
VALUE3 Value associated with data type defined in TYPE3.
N/A N/A C O
VALUE4 Value associated with data type defined in TYPE4.
N/A N/A C O
VOICE_MAIL_ID Voice mail ID. N/A N/A S O
Table 3–125 CSDL to ASDL Mapping
CSDL ASDL
C_CSCO-BTS10200_4-4_MOD_SUBSCRIBER-FEATURES
A_CSCO-BTS10200_4-4_QRY_SUBSCRIBER-FEATURES-ROLLBACK
C_CSCO-BTS10200_4-4_MOD_SUBSCRIBER-FEATURES
A_CSCO-BTS10200_4-4_MOD_SUBSCRIBER-FEATURES
C_CSCO-BTS10200_4-4_MOD_SUBSCRIBER-FEATURES
A_CSCO-BTS10200_4-4_SHOW_TRANSACTION-QUEUE
Table 3–126 C_CSCO-BTS10200_4-4_MOD_SUBSCRIBER-PROFILE
Parameter Name Description RangeDefault Value Type Class
ACTIVE_TARGET Specifies if the target is in active or stanby state (Y/N).
N/A N/A S O
ASDL_COUNTER ASDL sequence number in CSDL. For internal processing use only.
N/A N/A S O
COS_RESTRICT_ID Class of service restriction ID. N/A N/A S O
DIAL_PLAN_ID Dial plan profile ID. N/A N/A S R
DIGIT_MAP_ID Digit map ID. N/A N/A S O
EA_USE_PIC1 Route to PIC1. N/A N/A S O
INTERLATA_PFX1_OPT
InterLATA call. N/A N/A S O
LOCAL_PFX1_OPT Prefix options for a local call. N/A N/A S O
Table 3–124 (Cont.) C_CSCO-BTS10200_4-4_MOD_SUBSCRIBER-FEATURES
Parameter Name Description RangeDefault Value Type Class
CSDL Commands
Service Definition 3-63
3.1.63.1 Mapping to ASDLsThe following table illustrates the CSDL to ASDL mapping for this service.
3.1.64 C_CSCO-BTS10200_4-4_MOD_SUBSCRIBER-SERVICE-PROFILEModify a subscriber service profile.
LOCAL_SERVICE_AREA
Local service area. N/A N/A S O
NE_ID_CSCO-BTS10200_4-4
Host NE identifier. N/A N/A S R
ORIG_LINE_INFO Originating line information. N/A N/A S O
POLICY_SERVER_ID Policy server ID. N/A N/A S O
POP_ID Point of presence (POP) ID. N/A N/A S R
PRIVACY_MANAGER_ID
Privacy manager ID. N/A N/A S O
QOS_ID QOS index. N/A N/A S O
REGION Subscriber profile region. N/A N/A S O
SEQUENCE_NUM Numerical representation of the order of the stateminet in the transaction.
N/A N/A S O
SERVICE_ID Service ID. N/A N/A S O
STATEMENT Oracle and DBM SQL statement applied to the transaction.
N/A N/A S O
SUB_PROFILE_ID Subscriber profile ID. N/A N/A S R
TARGET ID of the media where the transaction resides.
N/A N/A S O
TEST_LINE_TYPE Type of test line. N/A N/A S O
TIMESTAMP Day and time of the transaction. N/A N/A S O
TOLL_PFX1_OPT Prefix options for a intraLATA toll. N/A N/A S O
TRANSACTION_ID Transaction ID returned by NE after MML command is processed.
N/A N/A C O
Table 3–127 CSDL to ASDL Mapping
CSDL ASDL
C_CSCO-BTS10200_4-4_MOD_SUBSCRIBER-PROFILE A_CSCO-BTS10200_4-4_QRY_SUBSCRIBER-PROFILE-ROLLBACK
C_CSCO-BTS10200_4-4_MOD_SUBSCRIBER-PROFILE A_CSCO-BTS10200_4-4_MOD_SUBSCRIBER-PROFILE
C_CSCO-BTS10200_4-4_MOD_SUBSCRIBER-PROFILE A_CSCO-BTS10200_4-4_SHOW_TRANSACTION-QUEUE
Table 3–126 (Cont.) C_CSCO-BTS10200_4-4_MOD_SUBSCRIBER-PROFILE
Parameter Name Description RangeDefault Value Type Class
CSDL Commands
3-64 Product Title/BookTitle as a Variable
3.1.64.1 Mapping to ASDLsThe following table illustrates the CSDL to ASDL mapping for this service.
3.1.65 C_CSCO-BTS10200_4-4_MOD_SUBSCRIBER-TIME-OF-DAYModify a subscriber time of day.
Table 3–128 C_CSCO-BTS10200_4-4_MOD_SUBSCRIBER-SERVICE-PROFILE
Parameter Name Description RangeDefault Value Type Class
ACTIVE_TARGET Specifies if the target is in active or stanby state (Y/N).
N/A N/A S O
ASDL_COUNTER ASDL sequence number in CSDL. For internal processing use only.
N/A N/A S O
NE_ID_CSCO-BTS10200_4-4
Host NE identifier. N/A N/A S R
SEQUENCE_NUM Numerical representation of the order of the stateminet in the transaction.
N/A N/A S O
SERVICE_ID Service ID. N/A N/A S O
STATEMENT Oracle and DBM SQL statement applied to the transaction.
N/A N/A S O
SUB_ID Subscriber ID. N/A N/A S R
TARGET ID of the media where the transaction resides.
N/A N/A S O
TIMESTAMP Day and time of the transaction. N/A N/A S O
TRANSACTION_ID Transaction ID returned by NE after MML command is processed.
N/A N/A C O
Table 3–129 CSDL to ASDL Mapping
CSDL ASDL
C_CSCO-BTS10200_4-4_MOD_SUBSCRIBER-SERVICE-PROFILE
A_CSCO-BTS10200_4-4_QRY_SUBSCRIBER-SERVICE-PROFILE-ROLLBACK
C_CSCO-BTS10200_4-4_MOD_SUBSCRIBER-SERVICE-PROFILE
A_CSCO-BTS10200_4-4_MOD_SUBSCRIBER-SERVICE-PROFILE
C_CSCO-BTS10200_4-4_MOD_SUBSCRIBER-SERVICE-PROFILE
A_CSCO-BTS10200_4-4_SHOW_TRANSACTION-QUEUE
Table 3–130 C_CSCO-BTS10200_4-4_MOD_SUBSCRIBER-TIME-OF-DAY
Parameter Name Description RangeDefault Value Type Class
ACTION Action of Subscriber N/A N/A S O
ACTIVE_TARGET Specifies if the target is in active or stanby state (Y/N).
N/A N/A S O
ASDL_COUNTER ASDL sequence number in CSDL. For internal processing use only.
N/A N/A S O
DOY1 Month and day. N/A N/A S O
DOY10 Month and day. N/A N/A S O
CSDL Commands
Service Definition 3-65
DOY2 Month and day. N/A N/A S O
DOY3 Month and day. N/A N/A S O
DOY4 Month and day. N/A N/A S O
DOY5 Month and day. N/A N/A S O
DOY6 Month and day. N/A N/A S O
DOY7 Month and day. N/A N/A S O
DOY8 Month and day. N/A N/A S O
DOY9 Month and day. N/A N/A S O
FEATURE_NAME Feature Name N/A N/A S R
NE_ID_CSCO-BTS10200_4-4
Host NE identifier. N/A N/A S R
SEQUENCE_NUM Numerical representation of the order of the stateminet in the transaction.
N/A N/A S O
START_DOW1 Day of week. N/A N/A S O
START_DOW10 Day of week. N/A N/A S O
START_DOW2 Day of week. N/A N/A S O
START_DOW3 Day of week. N/A N/A S O
START_DOW4 Day of week. N/A N/A S O
START_DOW5 Day of week. N/A N/A S O
START_DOW6 Day of week. N/A N/A S O
START_DOW7 Day of week. N/A N/A S O
START_DOW8 Day of week. N/A N/A S O
START_DOW9 Day of week. N/A N/A S O
START_TIME1 Start time. N/A N/A S O
START_TIME10 Start time. N/A N/A S O
START_TIME2 Start time. N/A N/A S O
START_TIME3 Start time. N/A N/A S O
START_TIME4 Start time. N/A N/A S O
START_TIME5 Start time. N/A N/A S O
START_TIME6 Start time. N/A N/A S O
START_TIME7 Start time. N/A N/A S O
START_TIME8 Start time. N/A N/A S O
START_TIME9 Start time. N/A N/A S O
STATEMENT Oracle and DBM SQL statement applied to the transaction.
N/A N/A S O
STOP_DOW1 Day of week that this policy ends. N/A N/A S O
STOP_DOW10 Day of week that this policy ends. N/A N/A S O
STOP_DOW2 Day of week that this policy ends. N/A N/A S O
Table 3–130 (Cont.) C_CSCO-BTS10200_4-4_MOD_SUBSCRIBER-TIME-OF-DAY
Parameter Name Description RangeDefault Value Type Class
CSDL Commands
3-66 Product Title/BookTitle as a Variable
3.1.65.1 Mapping to ASDLsThe following table illustrates the CSDL to ASDL mapping for this service.
3.1.66 C_CSCO-BTS10200_4-4_MOD_TERMINATIONModify a termination.
STOP_DOW3 Day of week that this policy ends. N/A N/A S O
STOP_DOW4 Day of week that this policy ends. N/A N/A S O
STOP_DOW5 Day of week that this policy ends. N/A N/A S O
STOP_DOW6 Day of week that this policy ends. N/A N/A S O
STOP_DOW7 Day of week that this policy ends. N/A N/A S O
STOP_DOW8 Day of week that this policy ends. N/A N/A S O
STOP_DOW9 Day of week that this policy ends. N/A N/A S O
STOP_TIME1 Stop time. N/A N/A S O
STOP_TIME10 Stop time. N/A N/A S O
STOP_TIME2 Stop time. N/A N/A S O
STOP_TIME3 Stop time. N/A N/A S O
STOP_TIME4 Stop time. N/A N/A S O
STOP_TIME5 Stop time. N/A N/A S O
STOP_TIME6 Stop time. N/A N/A S O
STOP_TIME7 Stop time. N/A N/A S O
STOP_TIME8 Stop time. N/A N/A S O
STOP_TIME9 Stop time. N/A N/A S O
SUB_ID Subscriber ID. N/A N/A S R
TARGET ID of the media where the transaction resides.
N/A N/A S O
TIMESTAMP Day and time of the transaction. N/A N/A S O
TRANSACTION_ID Transaction ID returned by NE after MML command is processed.
N/A N/A C O
Table 3–131 CSDL to ASDL Mapping
CSDL ASDL
C_CSCO-BTS10200_4-4_MOD_SUBSCRIBER-TIME-OF-DAY
A_CSCO-BTS10200_4-4_QRY_SUBSCRIBER-TIME-OF-DAY-ROLLBACK
C_CSCO-BTS10200_4-4_MOD_SUBSCRIBER-TIME-OF-DAY
A_CSCO-BTS10200_4-4_MOD_SUBSCRIBER-TIME-OF-DAY
C_CSCO-BTS10200_4-4_MOD_SUBSCRIBER-TIME-OF-DAY
A_CSCO-BTS10200_4-4_SHOW_TRANSACTION-QUEUE
Table 3–130 (Cont.) C_CSCO-BTS10200_4-4_MOD_SUBSCRIBER-TIME-OF-DAY
Parameter Name Description RangeDefault Value Type Class
CSDL Commands
Service Definition 3-67
3.1.66.1 Mapping to ASDLsThe following table illustrates the CSDL to ASDL mapping for this service.
3.1.67 C_CSCO-BTS10200_4-4_MOD_TWO-DIGIT-SPEED-CALLModify a speed call two digit.
Table 3–132 C_CSCO-BTS10200_4-4_MOD_TERMINATION
Parameter Name Description RangeDefault Value Type Class
ACTIVE_TARGET Specifies if the target is in active or stanby state (Y/N).
N/A N/A S O
ASDL_COUNTER ASDL sequence counter in CSDL. For internal processing use only.
N/A N/A S O
MGW_ID ID of the media gateway(1-32 ASCII characters).
N/A N/A S O
NE_ID_CSCO-BTS10200_4-4
Host NE Identifier N/A N/A S R
SEQUENCE_NUM Numerical representation of the order of the stateminet in the transaction.
N/A N/A S O
STATEMENT Oracle and DBM SQL statement applied to the transaction.
N/A N/A S O
TARGET ID of the media where the transaction resides.
N/A N/A S O
TERMINATION_ID The termination identifier. N/A N/A S R
TERM_OPER_STATUS Termination type. N/A N/A S O
TERM_TYPE Port number end N/A N/A S O
TG Trunk group ID. N/A N/A S O
TIMESTAMP Day and time of the transaction. N/A N/A S O
TRANSACTION_ID Transaction ID returned by NE after processing MML command.
N/A N/A C O
Table 3–133 CSDL to ASDL Mapping
CSDL ASDL
C_CSCO-BTS10200_4-4_MOD_TERMINATION A_CSCO-BTS10200_4-4_QRY_TERMINATION-ROLLBACK
C_CSCO-BTS10200_4-4_MOD_TERMINATION A_CSCO-BTS10200_4-4_MOD_TERMINATION
C_CSCO-BTS10200_4-4_MOD_TERMINATION A_CSCO-BTS10200_4-4_SHOW_TRANSACTION-QUEUE
CSDL Commands
3-68 Product Title/BookTitle as a Variable
Table 3–134 C_CSCO-BTS10200_4-4_MOD_TWO-DIGIT-SPEED-CALL
Parameter Name Description RangeDefault Value Type Class
ACTIVE_TARGET Specifies if the target is in active or stanby state (Y/N).
N/A N/A S O
ASDL_COUNTER ASDL sequence number in CSDL. For internal processing use only.
N/A N/A S O
DN20 Directory number. N/A N/A S O
DN21 Directory number. N/A N/A S O
DN22 Directory number. N/A N/A S O
DN23 Directory number. N/A N/A S O
DN24 Directory number. N/A N/A S O
DN25 Directory number. N/A N/A S O
DN26 Directory number. N/A N/A S O
DN27 Directory number. N/A N/A S O
DN28 Directory number. N/A N/A S O
DN29 Directory number. N/A N/A S O
DN30 Directory number. N/A N/A S O
DN31 Directory number. N/A N/A S O
DN32 Directory number. N/A N/A S O
DN33 Directory number. N/A N/A S O
DN34 Directory number. N/A N/A S O
DN35 Directory number. N/A N/A S O
DN36 Directory number. N/A N/A S O
DN37 Directory number. N/A N/A S O
DN38 Directory number. N/A N/A S O
DN39 Directory number. N/A N/A S O
DN40 Directory number. N/A N/A S O
DN41 Directory number. N/A N/A S O
DN42 Directory number. N/A N/A S O
DN43 Directory number. N/A N/A S O
DN44 Directory number. N/A N/A S O
DN45 Directory number. N/A N/A S O
DN46 Directory number. N/A N/A S O
DN47 Directory number. N/A N/A S O
DN48 Directory number. N/A N/A S O
DN49 Directory number. N/A N/A S O
NE_ID_CSCO-BTS10200_4-4
Host NE identifier. N/A N/A S R
SEQUENCE_NUM Numerical representation of the order of the stateminet in the transaction.
N/A N/A S O
CSDL Commands
Service Definition 3-69
3.1.67.1 Mapping to ASDLsThe following table illustrates the CSDL to ASDL mapping for this service.
3.1.68 C_CSCO-BTS10200_4-4_MOD_USER-AUTHENTICATIONModify a user authentication .
STATEMENT Oracle and DBM SQL statement applied to the transaction.
N/A N/A S O
SUB_ID Subscriber ID. N/A N/A S R
TARGET ID of the media where the transaction resides.
N/A N/A S O
TIMESTAMP Day and time of the transaction. N/A N/A S O
TRANSACTION_ID Transaction ID returned by NE after MML command is processed.
N/A N/A C O
Table 3–135 CSDL to ASDL Mapping
CSDL ASDL
C_CSCO-BTS10200_4-4_MOD_TWO-DIGIT-SPEED-CALL
A_CSCO-BTS10200_4-4_QRY_TWO-DIGIT-SPEED-CALL-ROLLBACK
C_CSCO-BTS10200_4-4_MOD_TWO-DIGIT-SPEED-CALL
A_CSCO-BTS10200_4-4_MOD_TWO-DIGIT-SPEED-CALL
C_CSCO-BTS10200_4-4_MOD_TWO-DIGIT-SPEED-CALL
A_CSCO-BTS10200_4-4_SHOW_TRANSACTION-QUEUE
Table 3–136 C_CSCO-BTS10200_4-4_MOD_USER-AUTHENTICATION
Parameter Name Description RangeDefault Value Type Class
ACTIVE_TARGET Specifies if the target is in active or stanby state (Y/N).
N/A N/A S O
AOR_ID Address of record id N/A N/A S O
ASDL_COUNTER ASDL sequence counter in CSDL. For internal processing use only.
N/A N/A S O
AUTH_REALM_ID authentication realm id N/A N/A S O
AUTH_USER authentication user name. N/A N/A S R
NE_ID_CSCO-BTS10200_4-4
Host NE Identifier N/A N/A S R
SEQUENCE_NUM Numerical representation of the order of the stateminet in the transaction.
N/A N/A S O
STATEMENT Oracle and DBM SQL statement applied to the transaction.
N/A N/A S O
TARGET ID of the media where the transaction resides.
N/A N/A S O
Table 3–134 (Cont.) C_CSCO-BTS10200_4-4_MOD_TWO-DIGIT-SPEED-CALL
Parameter Name Description RangeDefault Value Type Class
CSDL Commands
3-70 Product Title/BookTitle as a Variable
3.1.68.1 Mapping to ASDLsThe following table illustrates the CSDL to ASDL mapping for this service.
3.1.69 C_CSCO-BTS10200_4-4_QRY_AOR-TO-SUBSCRIBERQuery a address of record to subscriber.
3.1.69.1 Mapping to ASDLsThe following table illustrates the CSDL to ASDL mapping for this service.
3.1.70 C_CSCO-BTS10200_4-4_QRY_AUTHORIZATION-CODEQuery an authorization code.
TIMESTAMP Day and time of the transaction. N/A N/A S O
TRANSACTION_ID Transaction ID returned by NE after processing MML command.
N/A N/A C O
USER_AUTH_PASSWORD
password for this auth-user. N/A N/A S O
Table 3–137 CSDL to ASDL Mapping
CSDL ASDL
C_CSCO-BTS10200_4-4_MOD_USER-AUTHENTICATION
A_CSCO-BTS10200_4-4_QRY_USER-AUTHENTICATION-ROLLBACK
C_CSCO-BTS10200_4-4_MOD_USER-AUTHENTICATION
A_CSCO-BTS10200_4-4_MOD_USER-AUTHENTICATION
C_CSCO-BTS10200_4-4_MOD_USER-AUTHENTICATION
A_CSCO-BTS10200_4-4_SHOW_TRANSACTION-QUEUE
Table 3–138 C_CSCO-BTS10200_4-4_QRY_AOR-TO-SUBSCRIBER
Parameter Name Description RangeDefault Value Type Class
AOR_ID Address of record id for the subscriber. N/A N/A S O
NE_ID_CSCO-BTS10200_4-4
Host NE Identifier N/A N/A S R
SUB_ID Subscriber ID N/A N/A S O
Table 3–139 CSDL to ASDL Mapping
CSDL ASDL
C_CSCO-BTS10200_4-4_QRY_AOR-TO-SUBSCRIBER A_CSCO-BTS10200_4-4_QRY_AOR-TO-SUBSCRIBER
Table 3–136 (Cont.) C_CSCO-BTS10200_4-4_MOD_USER-AUTHENTICATION
Parameter Name Description RangeDefault Value Type Class
CSDL Commands
Service Definition 3-71
3.1.70.1 Mapping to ASDLsThe following table illustrates the CSDL to ASDL mapping for this service.
3.1.71 C_CSCO-BTS10200_4-4_QRY_AUTHORIZATION-CODE-GROUPQuery a authorization code group.
3.1.71.1 Mapping to ASDLsThe following table illustrates the CSDL to ASDL mapping for this service.
3.1.72 C_CSCO-BTS10200_4-4_QRY_CASUAL-WB-LISTQuery a casual white black list.
Table 3–140 C_CSCO-BTS10200_4-4_QRY_AUTHORIZATION-CODE
Parameter Name Description RangeDefault Value Type Class
AUTH_CODE_GROUP_ID
Authorization code group ID. N/A N/A S R
AUTH_ID Dialed authorization code. N/A N/A S R
NE_ID_CSCO-BTS10200_4-4
Host NE identifier. N/A N/A S R
Table 3–141 CSDL to ASDL Mapping
CSDL ASDL
C_CSCO-BTS10200_4-4_QRY_AUTHORIZATION-CODE
A_CSCO-BTS10200_4-4_QRY_AUTHORIZATION-CODE
Table 3–142 C_CSCO-BTS10200_4-4_QRY_AUTHORIZATION-CODE-GROUP
Parameter Name Description RangeDefault Value Type Class
AUTH_CODE_GROUP_ID
Authorization code group ID. N/A N/A S R
NE_ID_CSCO-BTS10200_4-4
Host NE identifier. N/A N/A S R
Table 3–143 CSDL to ASDL Mapping
CSDL ASDL
C_CSCO-BTS10200_4-4_QRY_AUTHORIZATION-CODE-GROUP
A_CSCO-BTS10200_4-4_QRY_AUTHORIZATION-CODE-GROUP
Table 3–144 C_CSCO-BTS10200_4-4_QRY_CASUAL-WB-LIST
Parameter Name Description RangeDefault Value Type Class
CARRIER Carrier Identification Code (CIC). N/A N/A S R
COS_RESTRICT_ID Class of service restriction ID. N/A N/A S R
NE_ID_CSCO-BTS10200_4-4
Host NE Identifier. N/A N/A S R
CSDL Commands
3-72 Product Title/BookTitle as a Variable
3.1.72.1 Mapping to ASDLsThe following table illustrates the CSDL to ASDL mapping for this service.
3.1.73 C_CSCO-BTS10200_4-4_QRY_CHANGED-NUMBERQuery a changed number.
3.1.73.1 Mapping to ASDLsThe following table illustrates the CSDL to ASDL mapping for this service.
3.1.74 C_CSCO-BTS10200_4-4_QRY_DN-TO-SUBSCRIBERQuery a DN2Subscriber.
3.1.74.1 Mapping to ASDLsThe following table illustrates the CSDL to ASDL mapping for this service.
Table 3–145 CSDL to ASDL Mapping
CSDL ASDL
C_CSCO-BTS10200_4-4_QRY_CASUAL-WB-LIST A_CSCO-BTS10200_4-4_QRY_CASUAL-WB-LIST
Table 3–146 C_CSCO-BTS10200_4-4_QRY_CHANGED-NUMBER
Parameter Name Description RangeDefault Value Type Class
NE_ID_CSCO-BTS10200_4-4
Host NE identifier. N/A N/A S R
OLD_DN The old subscriber directory number. N/A N/A S R
Table 3–147 CSDL to ASDL Mapping
CSDL ASDL
C_CSCO-BTS10200_4-4_QRY_CHANGED-NUMBER A_CSCO-BTS10200_4-4_QRY_CHANGED-NUMBER
Table 3–148 C_CSCO-BTS10200_4-4_QRY_DN-TO-SUBSCRIBER
Parameter Name Description RangeDefault Value Type Class
DN Directory number assigned to a subscriber.
N/A N/A S O
NE_ID_CSCO-BTS10200_4-4
Host NE identifier. N/A N/A S R
OFFICE_CODE_INDEX
Office code index. N/A N/A S O
SUB_ID Subscriber ID of the calling directory number.
N/A N/A S O
Table 3–149 CSDL to ASDL Mapping
CSDL ASDL
C_CSCO-BTS10200_4-4_QRY_DN-TO-SUBSCRIBER A_CSCO-BTS10200_4-4_QRY_DN-TO-SUBSCRIBER
CSDL Commands
Service Definition 3-73
3.1.75 C_CSCO-BTS10200_4-4_QRY_INTERNATIONAL-WB-LISTQuery an international white black list.
3.1.75.1 Mapping to ASDLsThe following table illustrates the CSDL to ASDL mapping for this service.
3.1.76 C_CSCO-BTS10200_4-4_QRY_MAC-TO-SUBSCRIBERQuery a MAC address to subscriber.
3.1.76.1 Mapping to ASDLsThe following table illustrates the CSDL to ASDL mapping for this service.
3.1.77 C_CSCO-BTS10200_4-4_QRY_MGPQuery a media gateway provisioning.
Table 3–150 C_CSCO-BTS10200_4-4_QRY_INTERNATIONAL-WB-LIST
Parameter Name Description RangeDefault Value Type Class
COS_RESTRICT_ID Class of service restriction ID. N/A N/A S R
COUNTRY_CODE_NATIONAL_NUMBER
Country code (CC) and national number (NN).
N/A N/A S R
NE_ID_CSCO-BTS10200_4-4
Host NE identifier. N/A N/A S R
Table 3–151 CSDL to ASDL Mapping
CSDL ASDL
C_CSCO-BTS10200_4-4_QRY_INTERNATIONAL-WB-LIST
A_CSCO-BTS10200_4-4_QRY_INTERNATIONAL-WB-LIST
Table 3–152 C_CSCO-BTS10200_4-4_QRY_MAC-TO-SUBSCRIBER
Parameter Name Description RangeDefault Value Type Class
MAC_ID Mac Address N/A N/A S O
NE_ID_CSCO-BTS10200_4-4
Host NE Identifier N/A N/A S R
SUB_ID Subscriber ID. N/A N/A S O
Table 3–153 CSDL to ASDL Mapping
CSDL ASDL
C_CSCO-BTS10200_4-4_QRY_MAC-TO-SUBSCRIBER A_CSCO-BTS10200_4-4_QRY_MAC-TO-SUBSCRIBER
Table 3–154 C_CSCO-BTS10200_4-4_QRY_MGP
Parameter Name Description RangeDefault Value Type Class
IP_ADDR IP address of the device. N/A N/A S R
NE_ID_CSCO-BTS10200_4-4
Host NE identifier. N/A N/A S R
CSDL Commands
3-74 Product Title/BookTitle as a Variable
3.1.77.1 Mapping to ASDLsThe following table illustrates the CSDL to ASDL mapping for this service.
3.1.78 C_CSCO-BTS10200_4-4_QRY_MGWQuery a media gateway.
3.1.78.1 Mapping to ASDLsThe following table illustrates the CSDL to ASDL mapping for this service.
3.1.79 C_CSCO-BTS10200_4-4_QRY_NATIONAL-WB-LISTQuery a national white black list.
3.1.79.1 Mapping to ASDLsThe following table illustrates the CSDL to ASDL mapping for this service.
3.1.80 C_CSCO-BTS10200_4-4_QRY_NATURE-OF-DIAL-WB-LISTQuery a nature of dial white black list.
Table 3–155 CSDL to ASDL Mapping
CSDL ASDL
C_CSCO-BTS10200_4-4_QRY_MGP A_CSCO-BTS10200_4-4_QRY_MGP
Table 3–156 C_CSCO-BTS10200_4-4_QRY_MGW
Parameter Name Description RangeDefault Value Type Class
MGW_ID The media gateway identifier (1-32 ASCII characters).
N/A N/A S R
NE_ID_CSCO-BTS10200_4-4
Host NE Identifier N/A N/A S R
Table 3–157 CSDL to ASDL Mapping
CSDL ASDL
C_CSCO-BTS10200_4-4_QRY_MGW A_CSCO-BTS10200_4-4_QRY_MGW
Table 3–158 C_CSCO-BTS10200_4-4_QRY_NATIONAL-WB-LIST
Parameter Name Description RangeDefault Value Type Class
COS_RESTRICT_ID Class of service restriction ID. N/A N/A S R
DIGIT_STRING Digit string using dashes. N/A N/A S O
NE_ID_CSCO-BTS10200_4-4
Host NE identifier. N/A N/A S R
Table 3–159 CSDL to ASDL Mapping
CSDL ASDL
C_CSCO-BTS10200_4-4_QRY_NATIONAL-WB-LIST A_CSCO-BTS10200_4-4_QRY_NATIONAL-WB-LIST
CSDL Commands
Service Definition 3-75
3.1.80.1 Mapping to ASDLsThe following table illustrates the CSDL to ASDL mapping for this service.
3.1.81 C_CSCO-BTS10200_4-4_QRY_ONE-DIGIT-SPEED-CALLQuery a speed call one digit.
3.1.81.1 Mapping to ASDLsThe following table illustrates the CSDL to ASDL mapping for this service.
3.1.82 C_CSCO-BTS10200_4-4_QRY_SCREEN-LISTQuery a screening list editing.
Table 3–160 C_CSCO-BTS10200_4-4_QRY_NATURE-OF-DIAL-WB-LIST
Parameter Name Description RangeDefault Value Type Class
COS_RESTRICT_ID Class of service restriction ID. N/A N/A S R
NATURE_OF_DIAL Nature of dial. N/A N/A S O
NE_ID_CSCO-BTS10200_4-4
Host NE identifier. N/A N/A S R
Table 3–161 CSDL to ASDL Mapping
CSDL ASDL
C_CSCO-BTS10200_4-4_QRY_NATURE-OF-DIAL-WB-LIST
A_CSCO-BTS10200_4-4_QRY_NATURE-OF-DIAL-WB-LIST
Table 3–162 C_CSCO-BTS10200_4-4_QRY_ONE-DIGIT-SPEED-CALL
Parameter Name Description RangeDefault Value Type Class
NE_ID_CSCO-BTS10200_4-4
Host NE identifier. N/A N/A S R
SUB_ID Subscriber ID. N/A N/A S R
Table 3–163 CSDL to ASDL Mapping
CSDL ASDL
C_CSCO-BTS10200_4-4_QRY_ONE-DIGIT-SPEED-CALL
A_CSCO-BTS10200_4-4_QRY_ONE-DIGIT-SPEED-CALL
Table 3–164 C_CSCO-BTS10200_4-4_QRY_SCREEN-LIST
Parameter Name Description RangeDefault Value Type Class
ANONYMOUS Anonymous entry. Permitted values are: Y/N.
N/A N/A S O
DN Directory number entry. N/A N/A S O
FEATURE_NAME Type of screening feature. N/A N/A S O
CSDL Commands
3-76 Product Title/BookTitle as a Variable
3.1.82.1 Mapping to ASDLsThe following table illustrates the CSDL to ASDL mapping for this service.
3.1.83 C_CSCO-BTS10200_4-4_QRY_SUBSCRIBERQuery a subscriber.
3.1.83.1 Mapping to ASDLsThe following table illustrates the CSDL to ASDL mapping for this service.
3.1.84 C_CSCO-BTS10200_4-4_QRY_SUBSCRIBER-FEATURESQuery subscriber features.
3.1.84.1 Mapping to ASDLsThe following table illustrates the CSDL to ASDL mapping for this service.
NE_ID_CSCO-BTS10200_4-4
Host NE identifier. N/A N/A S R
SUB_ID Subscriber ID from the subscriber. N/A N/A S R
TIMESTAMP The date and time the entry was added. Integer values permitted from 1 to 9999.
N/A N/A S O
Table 3–165 CSDL to ASDL Mapping
CSDL ASDL
C_CSCO-BTS10200_4-4_QRY_SCREEN-LIST A_CSCO-BTS10200_4-4_QRY_SCREEN-LIST
Table 3–166 C_CSCO-BTS10200_4-4_QRY_SUBSCRIBER
Parameter Name Description RangeDefault Value Type Class
ID Subscriber ID. N/A N/A S R
NE_ID_CSCO-BTS10200_4-4
Host NE identifier. N/A N/A S R
Table 3–167 CSDL to ASDL Mapping
CSDL ASDL
C_CSCO-BTS10200_4-4_QRY_SUBSCRIBER A_CSCO-BTS10200_4-4_QRY_SUBSCRIBER
Table 3–168 C_CSCO-BTS10200_4-4_QRY_SUBSCRIBER-FEATURES
Parameter Name Description RangeDefault Value Type Class
FEATURE_NAME Feature name. N/A N/A S O
NE_ID_CSCO-BTS10200_4-4
Host NE identifier. N/A N/A S R
SUB_ID Subscriber ID. N/A N/A S R
Table 3–164 (Cont.) C_CSCO-BTS10200_4-4_QRY_SCREEN-LIST
Parameter Name Description RangeDefault Value Type Class
CSDL Commands
Service Definition 3-77
3.1.85 C_CSCO-BTS10200_4-4_QRY_SUBSCRIBER-PROFILEQuery a subscriber profile.
3.1.85.1 Mapping to ASDLsThe following table illustrates the CSDL to ASDL mapping for this service.
3.1.86 C_CSCO-BTS10200_4-4_QRY_SUBSCRIBER-SERVICE-PROFILEQuery a subscriber servie profile.
3.1.86.1 Mapping to ASDLsThe following table illustrates the CSDL to ASDL mapping for this service.
3.1.87 C_CSCO-BTS10200_4-4_QRY_SUBSCRIBER-TIME-OF-DAYQuery a subscriber time of day.
Table 3–169 CSDL to ASDL Mapping
CSDL ASDL
C_CSCO-BTS10200_4-4_QRY_SUBSCRIBER-FEATURES
A_CSCO-BTS10200_4-4_QRY_SUBSCRIBER-FEATURES
Table 3–170 C_CSCO-BTS10200_4-4_QRY_SUBSCRIBER-PROFILE
Parameter Name Description RangeDefault Value Type Class
NE_ID_CSCO-BTS10200_4-4
Host NE identifier. N/A N/A S R
SUB_PROFILE_ID Subscriber profile ID. N/A N/A S R
Table 3–171 CSDL to ASDL Mapping
CSDL ASDL
C_CSCO-BTS10200_4-4_QRY_SUBSCRIBER-PROFILE A_CSCO-BTS10200_4-4_QRY_SUBSCRIBER-PROFILE
Table 3–172 C_CSCO-BTS10200_4-4_QRY_SUBSCRIBER-SERVICE-PROFILE
Parameter Name Description RangeDefault Value Type Class
NE_ID_CSCO-BTS10200_4-4
Host NE identifier. N/A N/A S R
SERVICE_ID Service ID. N/A N/A S O
SUB_ID Subscriber ID. N/A N/A S R
Table 3–173 CSDL to ASDL Mapping
CSDL ASDL
C_CSCO-BTS10200_4-4_QRY_SUBSCRIBER-SERVICE-PROFILE
A_CSCO-BTS10200_4-4_QRY_SUBSCRIBER-SERVICE-PROFILE
CSDL Commands
3-78 Product Title/BookTitle as a Variable
3.1.87.1 Mapping to ASDLsThe following table illustrates the CSDL to ASDL mapping for this service.
3.1.88 C_CSCO-BTS10200_4-4_QRY_TERMINATIONQuery a termination.
3.1.88.1 Mapping to ASDLsThe following table illustrates the CSDL to ASDL mapping for this service.
3.1.89 C_CSCO-BTS10200_4-4_QRY_TWO-DIGIT-SPEED-CALLQuery a speed call two digit.
3.1.89.1 Mapping to ASDLsThe following table illustrates the CSDL to ASDL mapping for this service.
Table 3–174 C_CSCO-BTS10200_4-4_QRY_SUBSCRIBER-TIME-OF-DAY
Parameter Name Description RangeDefault Value Type Class
NE_ID_CSCO-BTS10200_4-4
Host NE identifier. N/A N/A S R
SUB_ID Subscriber ID. N/A N/A S R
Table 3–175 CSDL to ASDL Mapping
CSDL ASDL
C_CSCO-BTS10200_4-4_QRY_SUBSCRIBER-TIME-OF-DAY
A_CSCO-BTS10200_4-4_QRY_SUBSCRIBER-TIME-OF-DAY
Table 3–176 C_CSCO-BTS10200_4-4_QRY_TERMINATION
Parameter Name Description RangeDefault Value Type Class
MGW_ID ID of the media gateway(1-32 ASCII characters).
N/A N/A S O
NE_ID_CSCO-BTS10200_4-4
Host NE Identifier N/A N/A S R
TERMINATION_ID The termination identifier. N/A N/A S R
Table 3–177 CSDL to ASDL Mapping
CSDL ASDL
C_CSCO-BTS10200_4-4_QRY_TERMINATION A_CSCO-BTS10200_4-4_QRY_TERMINATION
Table 3–178 C_CSCO-BTS10200_4-4_QRY_TWO-DIGIT-SPEED-CALL
Parameter Name Description RangeDefault Value Type Class
NE_ID_CSCO-BTS10200_4-4
Host NE identifier. N/A N/A S R
SUB_ID Subscriber ID. N/A N/A S R
CSDL Commands
Service Definition 3-79
3.1.90 C_CSCO-BTS10200_4-4_QRY_USER-AUTHENTICATIONQuery a user authentication .
3.1.90.1 Mapping to ASDLsThe following table illustrates the CSDL to ASDL mapping for this service.
3.1.91 C_CSCO-BTS10200_4-4_SHOW_TRANSACTION-QUEUEView all events in the transaction queue.
3.1.91.1 Mapping to ASDLsThe following table illustrates the CSDL to ASDL mapping for this service.
Table 3–179 CSDL to ASDL Mapping
CSDL ASDL
C_CSCO-BTS10200_4-4_QRY_TWO-DIGIT-SPEED-CALL
A_CSCO-BTS10200_4-4_QRY_TWO-DIGIT-SPEED-CALL
Table 3–180 C_CSCO-BTS10200_4-4_QRY_USER-AUTHENTICATION
Parameter Name Description RangeDefault Value Type Class
AUTH_REALM_ID authentication realm id N/A N/A S O
AUTH_USER authentication user name. N/A N/A S R
NE_ID_CSCO-BTS10200_4-4
Host NE Identifier N/A N/A S R
Table 3–181 CSDL to ASDL Mapping
CSDL ASDL
C_CSCO-BTS10200_4-4_QRY_USER-AUTHENTICATION
A_CSCO-BTS10200_4-4_QRY_USER-AUTHENTICATION
Table 3–182 C_CSCO-BTS10200_4-4_SHOW_TRANSACTION-QUEUE
Parameter Name Description RangeDefault Value Type Class
ACTIVE_TARGET Specifies if the target is in active or stanby state (Y/N).
N/A N/A S O
NE_ID_CSCO-BTS10200_4-4
Host NE Identifier N/A N/A S R
SEQUENCE_NUM Numerical representation of the order of the stateminet in the transaction.
N/A N/A S O
STATEMENT Oracle and DBM SQL statement applied to the transaction.
N/A N/A S O
TARGET ID of the media where the transaction resides.
N/A N/A S O
TIMESTAMP Day and time of the transaction. N/A N/A S O
TRANSACTION_ID The transaction identifier. N/A N/A C O
CSDL Commands
3-80 Product Title/BookTitle as a Variable
3.1.92 C_CSCO-BTS10200_4-4_UNEQUIP_SUBSCRIBER-TERMINATIONUnequip a subscriber-termination.
3.1.92.1 Mapping to ASDLsThe following table illustrates the CSDL to ASDL mapping for this service.
Table 3–183 CSDL to ASDL Mapping
CSDL ASDL
C_CSCO-BTS10200_4-4_SHOW_TRANSACTION-QUEUE
A_CSCO-BTS10200_4-4_SHOW_TRANSACTION-QUEUE
Table 3–184 C_CSCO-BTS10200_4-4_UNEQUIP_SUBSCRIBER-TERMINATION
Parameter Name Description RangeDefault Value Type Class
NE_ID_CSCO-BTS10200_4-4
Host NE Identifier N/A N/A S R
SUBSCRIBER_TERMINATION_ID
Subscriber termination Id on a particular gateway.
N/A N/A S R
Table 3–185 CSDL to ASDL Mapping
CSDL ASDL
C_CSCO-BTS10200_4-4_UNEQUIP_SUBSCRIBER-TERMINATION
A_CSCO-BTS10200_4-4_UNEQUIP_SUBSCRIBER-TERMINATION
4
Configuring ASAP to Support Additional NE Instances 4-1
4Configuring ASAP to Support Additional NEInstances
You can configure Oracle Communications ASAP (ASAP) to support the CSCO-BTS10200_4-4_HOST - NEP configuration using the Service Activation Configuration Tool (SACT). Refer to the ASAP Administration Guide for more information.
Extracting Source FilesBefore you can access an XML file to modify it, you must extract it from the .sar file. Use the following procedure to extract source files from the sar file.
To extract source files:
1. If necessary, create a repository directory, copy the .sar file to the new directory and un-jar the sar file.
2. After you un-jar the sar file, you can access the XML files.
Loading a New XML FileWhen you finish modifying an XML file, you must create a new sar file, then restart the cartridge using the new file.
Configuration XML FileBelow is an example of the Activation.Configuration.XML file for the CISCO_BTS_10200_4_4_EMS_1_0 cartridge.
<?xml version="1.0" encoding="UTF-8"?><activationConfig xmlns="http://www.metasolv.com/ServiceActivation/2003/ActivationConfig" xmlns:cfg="http://www.mslv.com/studio/activation/model/config" xmlns:route="http://www.mslv.com/studio/activation/model/routing" xmlns:sm="http://www.metasolv.com/ServiceActivation/2003/ServiceModel" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"> <connectionPool name="BTS41POL"> <device name="cisco_bts_10200_4_4_telnet_dev1"> <environment>DEVELOPMENT</environment> <lineType>TELNET_CONNECTION</lineType> </device> </connectionPool> <element name="CSCO_BTS10200_4-4_HOST"> <vendor>CSCO</vendor>
Configuration XML File
4-2 Product Title/BookTitle as a Variable
<technology>BTS10200</technology> <softwareLoad>4-4</softwareLoad> <nepServerName>$NEP</nepServerName> <primaryPool>BTS41POL</primaryPool> <maximumConnections>1</maximumConnections> <dropTimeout>2</dropTimeout> <spawnThreshold>10</spawnThreshold> <killThreshold>8</killThreshold> <routingElement name="CSCO-BTS10200_4-4_HOST"/> <communicationParameter> <label>HOST_IPADDR</label> <value> <value>localhost</value> </value> <description>The host name or IP Address of theremote NE.</description> <lineType>TELNET_CONNECTION</lineType> </communicationParameter> <communicationParameter> <label>PORT</label> <value> <value>23</value> </value> <description>Port number to connect on remote NE host.</description> <lineType>TELNET_CONNECTION</lineType> </communicationParameter> <communicationParameter> <label>OPEN_TIMEOUT</label> <value> <value>20</value> </value> <description>Connection timeout in seconds.</description> <lineType>TELNET_CONNECTION</lineType> </communicationParameter> <communicationParameter> <label>READ_TIMEOUT</label> <value> <value>30</value> </value> <description>Read timeout in seconds.</description> <lineType>TELNET_CONNECTION</lineType> </communicationParameter> <communicationParameter> <label>HOST_USERID</label> <value> <value>optiuser</value> </value> <description>Login User Name.</description> <lineType>TELNET_CONNECTION</lineType> </communicationParameter> <communicationParameter> <label>HOST_PASSWORD</label> <value> <value>optiuser</value> </value> <description>Password for the User.</description> <lineType>TELNET_CONNECTION</lineType> </communicationParameter> <communicationParameter>
Configuration XML File
Configuring ASAP to Support Additional NE Instances 4-3
<label>PROMPT</label> <value> <value>CLI></value> </value> <description>Provisioning prompt.</description> <lineType>TELNET_CONNECTION</lineType> </communicationParameter> <communicationParameter> <label>LOGIN_PROMPT</label> <value> <value>login:</value> </value> <description>Login prompt from the NE.</description> <lineType>TELNET_CONNECTION</lineType> </communicationParameter> <communicationParameter> <label>PASSWORD_PROMPT</label> <value> <value>Password:</value> </value> <description>Password prompt from the NE.</description> <lineType>TELNET_CONNECTION</lineType> </communicationParameter> <communicationParameter> <label>RESPONSELOG</label> <value> <value>TRUE</value> </value> <description>Flag to turn off or on Response log.</description> <lineType>TELNET_CONNECTION</lineType> </communicationParameter> <communicationParameter> <label>SSH_SUPPORT</label> <value> <value>YES</value> </value> <description>SSH Flag to indicate if the SSH is supported or not. Value YES or NO</description> <lineType>TELNET_CONNECTION</lineType> </communicationParameter> <communicationParameter> <label>SSH_PORT</label> <value> <value>3333</value> </value> <description>The SSH port number. Default is 22.</description> <lineType>TELNET_CONNECTION</lineType> </communicationParameter> <communicationParameter> <label>SSH_VERSION</label> <value> <value>SSH2</value> </value> <description>The SSH version, SSH1 or SSH2. Default is SSH2.</description> <lineType>TELNET_CONNECTION</lineType> </communicationParameter> <communicationParameter> <label>SSH_AUTH_METHOD</label> <value>
Configuration XML File
4-4 Product Title/BookTitle as a Variable
<value>PASSWORD</value> </value> <description>The SSH authentication method PASSWORD or PUBLIC_KEY.Default is PASSWORD.</description> <lineType>TELNET_CONNECTION</lineType> </communicationParameter> <communicationParameter> <label>SSH_PREF_PUBLIC_KEY</label> <value> <value>PUBLIC_KEY_SSHRSA</value> </value> <description>The SSH preferred public key, PUBLIC_KEY_SSHDSS orPUBLIC_KEY_SSHRSA. Default is PUBLIC_KEY_SSHRSA</description> <lineType>TELNET_CONNECTION</lineType> </communicationParameter> <communicationParameter> <label>SSH_PREF_CIPHER_CS</label> <value> <value>CIPHER_BLOWFISH_CBC</value> </value> <description>The SSH preferred CS cipher.</description> <lineType>TELNET_CONNECTION</lineType> </communicationParameter> <communicationParameter> <label>SSH_PREF_CIPHER_SC</label> <value> <value>CIPHER_BLOWFISH_CBC</value> </value> <description>The SSH preferred SC cipher.</description> <lineType>TELNET_CONNECTION</lineType> </communicationParameter> <communicationParameter> <label>SSH_PREF_MAC_CS</label> <value> <value>HMAC_MD5</value> </value> <description>The SSH preferred CS message authentication.</description> <lineType>TELNET_CONNECTION</lineType> </communicationParameter> <communicationParameter> <label>SSH_PREF_MAC_SC</label> <value> <value>HMAC_MD5</value> </value> <description>The SSH preferred SC message authentication.</description> <lineType>TELNET_CONNECTION</lineType> </communicationParameter> <communicationParameter> <label>SSH_PREF_COMP_CS</label> <value> <value>COMPRESSION_NONE</value> </value> <description>The SSH preferred CS compression.</description> <lineType>TELNET_CONNECTION</lineType> </communicationParameter> <communicationParameter> <label>SSH_PREF_COMP_SC</label> <value>
Configuration XML File
Configuring ASAP to Support Additional NE Instances 4-5
<value>COMPRESSION_NONE</value> </value> <description>The SSH preferred SC compression.</description> <lineType>TELNET_CONNECTION</lineType> </communicationParameter> </element></activationConfig>
Configuration XML File
4-6 Product Title/BookTitle as a Variable