Date post: | 06-May-2015 |
Category: |
Engineering |
Upload: | madhur-mahajan |
View: | 580 times |
Download: | 22 times |
Orthographic Projections
Projections Projections
Parallel/Cylindrical
Perspective/Conical
Oblique Orthographic One-Point Three-PointTwo-Point
Cabinet
Other
Cavalier
Multi-view
Axonometric
First-angle Fourth-angle Third-angle Second-angle
Isometric (30°)
Di-metric Trimetric
Parallel Projections
Perspective Projections
Oblique Projections • Projectors are parallel to each other but
not perpendicular to projection plane• An oblique projection shows front and top
surfaces that include the three dimensions of height, width, and depth.
• The front or principal surface of an object (the surface toward the plane of projection) is parallel to the plane of projection.
• Effective in pictorially representing objects
Orthographic Projections• Orthographic projections are drawings
where the projectors, the observer or station point remain parallel to each other and perpendicular to the plane of projection.
• Orthographic projections are further subdivided into axonometric projections and multi-view projections.
• Effective in technical representation of objects
Axonometric
• The observer is at infinity & the projectors are parallel to each other and perpendicular to the plane of projection. #
• A key feature of axonometric projections is that the object is inclined toward the plane of projection showing all three surfaces in one view.
• The length of the lines, sizes of the angles, and proportions of the object varies according to the amount of angle between the object and the plane of projection.
Axonometric
The object is tilted with all three coordinate axes are visible in any one view
(PP projection plane)
Orthographic (Orthogonal)
The object is at rest and two coordinate axes are visible in any one view
(PP projection plane)
Multiview Projections
Multiview Projections
• Front surfaces of object is parallel to plane of projection
• Projectors or line of sights are perpendicular to projection plane
• Projectors are parallel to each other and originate from any point on object
The six views
Angles
• First angle projection – European System• Third angle projection – American System
First Angle Projection
First Angle Projection 1
How to draw plan and elevation?
First Angle Projection 2
How to draw end view?
First Angle Projection 3
Points to remember:
• The ‘front view’ (or elevation) is the view with maximum information.
•The ‘plan’ is below the ‘elevation’ (in projection).
•The ‘end view’ is placed on the right if viewed from left side of object and on the left if viewed from right side.
•‘End view’ and plan face inwards from ‘elevation’.
Third Angle Projection
Third Angle Projection 1
How to draw plan and elevation?
In 3rd angle projection planes are transparent and objects are viewed through them
Third Angle Projection 2
How to draw end view?
Third Angle Projection 3
Points to remember:
• The ‘front view’ (or elevation) is the view with maximum information.
•The ‘plan’ is above the ‘elevation’ (in projection).
•The ‘end view’ is placed on the right if viewed from right side of object and on the left if viewed from left side.
•‘End view’ and plan face outwards from ‘elevation’.
STAY curious
MADHUR MAHAJAN