PANEL MATERIALS TECHNICAL
NONWOVENS
We kindly invite you to check our offer and to further contact and cooperation.
LICON INTERNATIONAL has been successfully functioning in furniture and upholstery industry since 1998. Over this period of time we have become one of the leading suppliers of furniture technical nonwovens, timber and panel materials in Poland and now we are getting strong position on an international market. We are also really proud of our continuous development; every year of our business activity ends with better results than previous one.
This success is determined by continuous expansion of our offer, search for new purchase possibilities on foreign markets as well as ongoing work to improve the services provided to our customers, the professionalism of our personnel and our focus primarily on the customer's needs. The latter factor has greatly contributed to the fact that over these years the range of assortments we provide, possibility to request tailor-made packaging of materials have grown significantly. We have 3 lines for scrolling and cutting nonwoven fabrics which allows us to work on materials up to 3.2 m wide and with diameter of over 70 cm quickly and flexibly.
In 2015 we acquired shares in spunbond production line in China which allows us to respond to market needs more effectively . Our offer of timber and panel materials has also got richer. All of this is the result of our work and contacts in Belarus, Ukraine, Romania, Slovakia and China.
In 2015 we have expanded our branch offices in Lviv and Minsk.
More details can be found on the following pages.
We care about the quality of our products, therefore we have the whole range of required up-to-date certificates such as Oeko-Tex, TUV Rheinland, FIRA, SATRA, INTERTEK, FSC, REACH declarations and documents required by IKEA.
NOTES
4 PANEL MATERIALS• TECHNICAL NONWOVENS
„SPUNBOND” TYPE NONWOVEN FABRICS
This polypropylene nonwoven material, also known as fleece, is very versatile and widely used in upholstery and furniture industry. It's highly appreciated because of its tensile and tearing strength. At the same time, this nonwoven fabric is breathable and it is flame-retardant. High quality nonwoven fabric is made from pure polypropylene and does not contain any harmful substances and additives.
• It can be used as: sliding layer which makes pulling the cover between foam and upholstery fabric easier, sliding layer for seat base, material for linings in the production of pillows and quilts, upholstery fabric for invisible parts of the furniture or material for fabric pockets covering the springs.
• In furniture industry it is mostly used in white, black, gray and beige colours.
• Standard width is 1,6 m, but in Licon International we have 3 packaging machines (cutting with requested width and strolling). Due to this fact we can offer almost every width for customer's individual needs. The minimum width in packaging is 12 cm and maximum available is 3,2 m.
Since the middle of 2015 Licon International has been a shareholder of modern spunbond production line located in Shandong province in China.It allows us to provide our customers with a vast range of width options, including mattress width. All width options up to 2,45 m are available.Being co-owners of the production line we are able to influence the price policy and quality control.
NOTES
5PANEL MATERIALS• TECHNICAL NONWOVENS
• as an upholstery material for invisible parts of furniture(especially for leather furniture)
• as a fixation layer for seat bases by joining with Velcro• as an upholstery and material for spring pockets.
Available weight: 80, 100, 120 and 150 g for smooth version and 120 g for embossed version.
Colours: black, gray, brown, beige and sand.Standard width of rolls is 1,6 m, but we can adapt it to the customer's individual needs up to 3,2 m.
„THERMOFELT” NEEDLED NONWOVEN FABRIC (OF FIBERTEKS TYPE)
It is also a polypropylene nonwoven fabric, however, it is produced with needlepunched technology. Advanced process allows to produce smooth, soft-sided, double-sided calendered nonwovens or ones with the embossed pattern.
Thermofelt is characterized by its tensile and tearing strength and air permeability. It has hygienic certificates, is flame-retardant, and can also be in fully non-flammable version.
Examples of usage:
NOTES
6 PANEL MATERIALS• TECHNICAL NONWOVENS
FURNITURE PAPERBOARD
We also offer furniture paperboard both solid and glued which has proven its high quality among a lot of our customers.
Solid and glued paperboard is used in furniture industry for assembling furniture constructions, for producing upholstered furniture frames. It is available in different formats according to customer's needs.
Specification of the product:
• 100% waste paper• Sodium silicate - connector of paperboard layers with Quality Control
Certificate (Material Safety Data Sheet is enclosed within eachshipment)
• Lack of hazardous ingredients.• Paperboard complies with the requirements of 94/62/EC EU Directive
regarding heavy metal contents and RP Act of May 11, 2001.(Journalof Laws of 2001, n# 63 item 638 as amended)
Technical specification of glued paperboard
PARAMETER UNIT MEASUREMENT
Basis weight g/m2 800 - 2450Weight deviation % ± 5
Sheet dimensions mm
Any, e.g:680 x 1560800 x 12001000 x 13301000 x 15201000 x 2000
max 2000 x 1700Sheet cutting efficiency % 2/4
Efficiency of 1000 kg/m2
e.g. 1000 g m2 ≈ 1050
Thickness deviation % ± 0,05Dimensional deviation mm +5/-3
Moisture resistance % Not more than 24 calenderings
Minimum moisture % Not more than 12Gluing Cobb30 g/m2 From 60 to 100
NOTES
7PANEL MATERIALS• TECHNICAL NONWOVENS
This product is certified by FSC RECYCLED
Standard nr 86/P/50528/2015 FSC CU-COC-822884
NOTES
8 PANEL MATERIALS• TECHNICAL NONWOVENS
Other thickness is also available on customer's individual request.
BEECH, SPRUCE AND PINE TIMBERRecently our offer has been enriched with high quality beech and pine timber. Beech timber is presented as ready goods (laths-flitches) with the following basic thickness range:
Beech lath
Dimensions (mm) Length (m) Class Moisture
47 x 24
0,55 – 3,05 1/2 10 - 12%
49 x 2250 x 2555 x 2455 x 2855 x 29
Pine lath
Dimensions (mm) Class Moisture
25 x 25
1/2 10 - 12%
28 x 2828 x 4845 x 2447 x 40 50 x 2050 x 2553 x 2255 x 1855 x 24100 x 19
NOTES
9PANEL MATERIALS• TECHNICAL NONWOVENS
Recently our offer has been enriched with high quality beech and pine timber
NOTES
10 PANEL MATERIALS• TECHNICAL NONWOVENS
PANEL MATERIALSIn order to be able to offer our customers the full range of materials needed for furniture construction, our offer includes a wide variety of panel materials.
We offer particleboards and fibreboards.
Particleboards are manufactured from specially prepared wood shavings and resin which are pressed by the applying high temperature and pressure. Due to the high dimensional stability under influence of humidity changes, versatility and stability, particleboards have gained wide acceptance in the furniture industry, carpentry and construction.
Fibreboard is also one of the wood-based materials. Main advantages of fibreboard are as follows:
• high mechanical strength• big sheet format• material homogeneity• easy coating, laminating and bonding with other material• plastic and machining workability• excellent bending
Boards dimensions available in Licon International:
Kind of board Thickness (mm) Dimensions (mm)
Fibreboard raw
2,53,25
2750 x 17001610 x 2440
Fibreboard laminated
2,53,2 2750 x 1700
Particleboard raw 12, 15, 16, 22 2800 x 2070
2750 x 1830Particleboardlaminated
1618
2800 x 20702750 x 1830
NOTES
11PANEL MATERIALS• TECHNICAL NONWOVENS
HDF
Thickness (mm) Dimensions (lnth x wth) mm Density(kg/m3)
32800 x 2070 710 - 850
4
MDFPARAMETER INDEX
DENSITY 4-40 mm
PANEL FORMAT 2800 x 2070 mm2440-2800 x 1830-2070
STANDARD DENSITY 760-780
FORMALDEHYDE E1 EMISSION CLASS STB EN 622-1
FORMALDEHYDE CONTENT mg/100 gr of panel ≤ 8
MOISTURE 4≤ 11 %
MDF
MDF - Medium Density Fibreboard. It is a kind of fibreboards with medium hardness and high density which is a result of pressing wood fibres with organic binders and hardening agents by applying high pressure and temperature.
MDF is a good alternative to natural wood. Moreover it does not contain any structural deficiencies which natural wood often has, such as knots or cracks.Due to high quality of surface, homogeneous density and fibre composition these boards are perfect for further processing (milling, varnishing and coating with different materials) which is essential in furniture and carpentry products manufacturing.
We have MDF panels in permanent offerand
at competitive prices
MD
F -
ME
DIU
M D
EN
SIT
Y F
IBR
EB
OA
RD
NOTES
12 PANEL MATERIALS• TECHNICAL NONWOVENS
PLYWOOD
The next item we are pleased to offer is plywood.
This kind of material is greatly appreciated for its excellent features.Plywood is manufactured from dried layers of wood veneer that are glued and pressed by applying hight temperature. Cross gluing of sheets reduces the risk of natural shrinkage and swelling of the material. Due to this fact plywood is stronger and more dimensionally stable than solid wood.
UsageDue to its dimensional and shape stability our product is very popular in the following areas:
• furniture industry (upholstered furniture, elements ofconstruction)
• carpentry (wood-crafted items, construction woodwork)• means of transport (e.g. padding of walls, ceilings and floors,
decorating elements)• building
Plywood
Thickness (mm) Dimensions (lngth x wdth) mm Class
5
1525 x 1525
2/3, 2/4, 3/3, 3/4, 4/4
68101215
1525 x 15251250 x 2500
182124
NOTES
13PANEL MATERIALS• TECHNICAL NONWOVENS
NEEDLED NONWOVEN FABRIC
This high quality material with consistent colour can be a good replacement for felt made from waste.
It is used to cover the springs while manufacturing upholstered furniture and mattresses, and as a base for upholstery fabric. Covering springs with this material results in softness and comfort of the seat base, retaining shape and flexibility. Non-toxic, hypoallergenic, without detrimental effect on the body by direct contact, it is resistant to water and acids.
We also have a wide assortment of sewing threads from many reputable manufacturers and in many variations.The offer also includes the transparent packing adhesive tape in 66 m roll, high quality of which has been proven by many of our clients. It is a very good value for money.
POLYESTER FIBRE
Our offer includes crimped fibers, of circular section. They are designed primarily for the production of fluffy nonwovens, silicone beads, fillings of duvets and pillows.
• The fibers are hypoallergenic, very strong in terms of tearing, foldingand wearing, as well as unaffected by light, chemical or biologicalagents.
• Thickness: 1.7 to 8 dtex, available lengths: 32, 51, 64, 76 mm
UPHOLSTERY ACCESSORIES
We also have a wide offer of basic upholstery accessories, such as Velcro tape, zipper tapes and zippers, upholstery rubber, welt cords, webbings, bias tapes and ribbons.
This rich assortment is available in many variations, widths and colours. For more detailed information please contact our office or sales representatives.
LICON FROM A DIFFERENT PERSPECTIVE
In LICON we care about the close and cordial relations with our customers, suppliers and colleagues. Every year we present ourselves on or visit all major trade fairs in Poland and abroad.
Trip with the clients and sales representatives for a trade fair Interzum Guangzhou, China.
Trade fair in Poznań.
Starting in 2015 we help with organizing international film festival.
Caring for good relations with our partners, we arrange spectacular banquets as well as try to take part in events organized by our partners.
Chemist's Day 2014 Svetlogorsk, Belarus.
WORK ON ADVERTISEMENT
FOR BHP BANK
We are pleased to inform you that due to our long
and fruitful cooperation with BPH SA Bank we were
invited to participate in a professional advertising of
factoring services, which were developed by
BPH SA with regard to electronic media. We
actively use this service, which has a positive
impact on our growth and by accepting invitation
of BPH we decided to share our experiences with
others. Out of hundreds of its customers, BPH
SA Bank has chosen only two and we are
happy to be in this preferred group. We would
like to invite you to watch this advertisement
where you can see the scenes of our day-to-
day work. It is available on Youtube when
typing „BPH faktoring” in search window.
www.licon.pl
8 Chrząstowicka Str. 46-053 DębieChrząstowicephone./fax +48 (77) 42708 70 phone./fax +48 (77)427 08 71
Licon Kępno Branchul. Przemysłowa 312 63-600 Kępnotel. +48 519 866 255email: [email protected]
Licon Ukraine BranchUkraine79024 Lviv, Bogdana Chmielnickiego Str. 176, Office 1 tmob.phone+380 679 340 401 Yurii Vorobets
Licon Belarus Branch Belarus
220138 Minskul. Karvata d. 31 G/ 135 Denis Bureikophone +375 29 628 66 29 Furniture fabrics
Artem Stepanukphone +375 29 667 73 63 Panel materialsWood
Licon Germany BranchBiegenstraße 39 35037 Marburg+49 6421 8402997+49 176 211 29 175
Opole
Bratysława
Marburg
Lwów
Baia Mare
Gradiska
Bjelovaru
Kijów
Dniepropetrowsk
Legnica
Zielona GóraLublin
Łódź
Kępno
Toruń Białystok
WilnoMińsk
SŁOWACJA
WĘGRY
CZECHY
NIEMCY
CHORWACJA
BOŚNIAHERCEGOWINA
UKRAINA
LITWA
BIAŁORUŚ
RUMUNIAPecs
Praga
HEADQUATERS (Opole)
BRANCHES:Kępno, Mińsk, Lviv, Marburg, Bratysława
REPRESENTATIVES: Białystok, Legnica, Łódź, Toruń Zielona Góra, Lublin
PARTNERS:Baia Mare, Bratysława, Praga Dniepropetrowsk, Kijów,Wilno, Bjelovaru, Gradiska, Pecs