Particulate & Molecular Air Filter Productsfor Commercial & Industrial Applications

March 2011

- 3 -

Clean air is essential to life. Never before has the need for clean,

breathable air been more important than it is today. Whether it’s the

quality of the outdoor air we need to survive as a species or the

quality of indoor air in our homes and workplaces or the ultra clean

air required to produce the food we eat, the medicines we imbibe

or the microchips for our computers, clean air is not something that

can be taken for granted. In today’s modern, densely populated and

industrialized world there is a growing need to provide clean air for

the protection of people, processes and the environment. Nowhere

is the commitment to the promotion of cleaner air more apparent, or

better stated, than in the AAF motto ‘Better Air is Our Business’. At

AAF, we believe that our air filter products are a means to an end:

the end being - cleaner air.

AAF is a member of Daikin Industries, a global supplier of air

conditioning and refrigerating products, systems and chemicals. In

this brochure a selection of AAF’s range of particulate and molecular

air filtration products and components for commercial and industrial

HVAC, automotive, gas turbine and cleanroom applications is

outlined. For readers to identify their application of interest quickly

simply follow the colour code scheme outlined below.

Green = Commercial&IndustrialHVAC

Blue = Cleanroom

Red = Automotive

Yellow = GasTurbine

Commercial & Industrial: a complete range of particulate and

molecular air filters that improve the quality of indoor air in hospitals,

offices, schools, shopping malls, airports, museums and many other

types of commercial and public buildings.

Cleanroom: a full range of EPA, HEPA and ULPA filters with glass

fibre or AAF’s unique HELIOR ePTFE media augmented with an

extensive selection of ceiling grids, housings and other auxiliary

equipment for the semiconductor, pharmaceutical, food and

cleanbench industries where ultra clean air is critical.

Automotive: a range of silicon free air filters for paint spraying and

high temperature drying line processes that are needed to ensure

the smooth, glossy paint surface finish on cars.

GasTurbine: an extensive range of energy saving air filters that

promote turbine efficiency, cost savings and component protection.

For more information about the air filtration solutions AAF has to

offer, please visit us at www.aafeurope.com.

Note:Am% = Average Arrestance for Coarse Filters in the Classification Range G1 - G4.Em% = Average Efficiency for Fine Filters in the Classification Range F5 - F9 against 0.4 μm.E% = Mean Fractional Efficiency for EPA, HEPA & ULPA Filters in the Classification range E10 - U17.MPPS = Most Penetrating Particle Size

EN779:2002

CoarseFilters(G)

G1 Am<65

AmerGlasM57,AmerglasStandard,AmerTexR15&R17,Roll-O-MatM85,HV2000(Dry),MetaNet

G2 65≤Am<80

AmerGlas5700,AmerGlasM57,AmerTexR29,Roll-O-MatM94,MetaNetwithViscosine,HV2000(withViscosine)

G3 80≤Am<90

AmerTexR50,ChevroNet,CG-HT,PerfectPleatHC&Ultra,DriPak25,VariCelIIHT

G4 90≤Am

FineFilters(F)

AmerTexF,DriPakGF,DriPak2000,DriPak2000S F5 40≤Em<60

DriPakGF,DriPak2000S,VariCel,VariCelVXL,VariCelEcoPak,VariCelM-Pak,VariCelHT,VariCelIIHT,DuraVee,DuraVeeXL,DuraVeeHXL

F6 60≤Em<90

DriPakGF,DriPak2000S,VariCel,VariCelVXL,VariCelEcoPak,VariCelM-Pak,VariCelHT,DuraVee,DuraVeeXL,DuraVeeHXL

F7 80≤Em<90

DriPakGF,DriPak2000S,VariCel,VariCelVXL,VariCelEcoPak,VariCelM-Pak,VariCelHT,VariCelIIHT,DuraVee,DuraVeeXL,DuraVeeHXL

F8 90≤Em<95

DriPakGF,VariCel,VariCelVXL,VariCelEcoPak,VariCelM-Pak,VariCelDihedral,VariCelIIHT,DuraVee,DuraVeeXL,DuraVeeHXL

F9 95≤Em

EN1822:2009

EPA,HEP

A&UL

PAFilters(E,H&U)

BioCel,BioCelVXL,BioCelM-Pak,BioCelHT,BioCelVHT,DuraVee,DuraVeeXL,DuraVeeHXL

E10 E≥85

BioCelI,BioCelIl,BioCelIlI,BioCelVXL,BioCelDihedral E11 E≥95

AstroCelI,AstroCelIII,AstroCelVXL E12 E≥99.5

AstroCelI,AstroCelHC,AstroPak,AstroCelII,AstroCelIII,AstroCelIIING,AstroCelVXL,AstroCelDihedral,MEGAcelI

H13 E≥99.95

AstroCelI,AstroCelII&TM,AstroCelHC,AstroCelDihedral,MEGAcelI,MEGAcelII

H14 E≥99.995

AstroCelII&TM,MEGAcelII U15 E≥99.9995

AstroCelII&TM,MEGAcelII U16 E≥99.99995

AstroCelII&TM U17 E≥99.999995

AAF filter selection per filter classification

- 4 -

Commercial & Industrial FiltersForaBetterIndoorAirQuality

- 5 -

Commercial & Industrial Filters

• For various types of air conditioning installations or as prefilter in a multi-stage filtration system• High arrestance synthetic media• Classification G2 to G4 according to EN779:2002• Low resistance to airflow, high dust holding capacity• Washable• For more detailed product information: see product leaflet no. 504

• For use in light industrial and commercial applications (standard) and for tough, heavy duty applications (5700)• Progressive density glass fibre media• Viscosine-coated for excellent dust holding capacity• Classification G2 (Standard) and G3 (5700) according to EN779:2002• Fully incinerable• For more detailed product information: see product leaflet no. 511

• For all types of air handling units• Viscosine-coated for excellent dust holding capacity• Classification G2 according to EN779:2002• 13, 25 and 50 mm depths• Available in pads and rolls• Easy to install• For more detailed product information: see product leaflet no. 512

• For AAF automatic roll filter installations• Viscosine-coated for excellent dirt-trapping• Classification G2 (M85) and G3 (M94) according to EN779:2002• Available in 5 different widths• Long lifetime• For more detailed product information: see productleaflet no. 203

Roll-O-Mat ®

AmerGlas ® M57

AmerGlas ® Standard & 5700

AmerTex ® R Media

- 6 -

- 7 -

Commercial & Industrial Filters

• First stage filter in air handling units and as prefilter to higher efficiency filters• High integrity form retaining media• Classification G4 according to EN779:2002• Water resistant frame• No metal parts – fully incinerable• Available in 20mm, 44 and 95mm depth• For more detailed product information: see product leaflet no. 515, 516, 517

• High air cleaning performance as prefilter or main filter• Excellent dust holding capacity and long service life• Classification G4 according to EN779:2002• Sturdy galvanized steel frame for harsh operating conditions• Compact size (48mm depth) and lightweight• For more detailed product information: see product leaflet no. 341

• Washable metal air filter for use in heavy duty industrial applications, commercial and industrial HVAC units and as grease filters in kitchen hoods• Classification G3 when coated with AAF’s special dirt trap adhesive Viscosine, in dry state G2 according to EN779:2002• Lightweight, easy to clean and install• For more detailed product information: see product leaflet no. 129

• Used as first stage filter and/or as prefilter to higher efficiency filters in air handling units• Synthetic filter media with high dust holding capacity• Classification G4 according to EN779:2002• All polymer construction – fully incinerable• Long service life• For more detailed product information: see product leaflet no. 545

Perfect Pleat ®

ChevroNet ®

MetaNet ®

DriPak ® 25

• Meet the requirements of numerous industrial and commercial applications• Glass fibre media with high dust holding capacity and long service life• Classification F5-F9 to EN779:2002• Available with a metal and plastic header• For more detailed product information: see product leaflet no. 543

• Used as prefilter for instance in split unit systems• Classification F6-F9 to EN779:2002• Polystyrene cell sides – fully incinerable construction• Conform VDI6022 and EN13779• Better filtration of fine particles• Lightweight and easy to install• For more detailed product information: see product leaflet no. 120

• Ideal filter for an air handling unit in which space is limited• Classification F6-F9 to EN779:2002, E10 to EN1822:2009• Polysterene cell sides – fully incinerable construction• Lightweight and easy to install• For more detailed product information: see product leaflet no. 161

DriPak ® GF

VariCel ® EcoPak

VariCel ® - BioCel ® M-Pak

DriPak ® 2000 S

- 8 -

Commercial & Industrial Filters

• Ideal as a first or second stage filter in an air handling unit• Sonic sealed synthetic pocket with high DHC• Classification F5-F8 to EN779:2002• All polymer construction: fully incinerable• Excellent performance in high airflow and high dust loading conditions• For more detailed product information: see product leaflet no. 542

• For use in industrial and commercial air handling units• High capacity compact filters: 3000 to 5000 m3/h• Excellent performace in difficult operating conditions• Classification F6-F9 to EN779:2002, E10-H13 to EN1822:2009• Polysterene cell sides – fully incinerable construction• Lightweight and easy to install• For more detailed product information: see product leaflet no. 363, 365

• For use as main or prefilter in industrial and commercial air handling units• For use as first stage HEPA filter in Laminar Flow Cabinets• Classification F9 to EN779:2002, E11, H13 and H14 to EN1822:2009• Non corrosive, fully incinerable• For more detailed product information: see product leaflet no. 328

• The ideal solution to improve IAQ for Commercial and light Industrial applications• Removes gases and odours• SAAFCarb™ impregnated synthetic media• Available in 20mm, 45mm, 95mm depth• Self supporting media – no metal• For more detailed product information: see product leaflet no. 003

• Pleated compact filter for high quality IAQ requirements• Minigranulate SAAFCity™ media embedded between synthetic media• Integrated prefilter F7 to EN779:2002• Fully incinerable• Sturdy construction• For more detailed product information: see product leaflet no. 004

VariCel ®-BioCel VXL®

AstroCel ® VXL

Dihedral ®

AmAir ® / C

VariSorb ® XL SAAFCity

- 9 -

Commercial & Industrial Filters

• Used as fresh air recirculation and exhaust filter• Removal of VOC’s or specific gas contaminants• Filled with loose granular or extruded SAAFMedia™

• Available in Metal and Plastic execution• Sturdy construction• For more detailed product information: see product leaflet no. 009

SAAFCanister ™

• For Commercial and Industrial applications• Filled with loose granular or extruded SAAFMedia™

• Sturdy polystyrene construction• Environmental friendly• Standard dimensions• For more detailed product information: see product leaflet no. 100

SAAFCassette ™

Commercial & Industrial Filters

• For physisorption or chemisorption of unwanted gaseous contaminants• Wide range of gas-specific or custom blended media• For more detailed product information: see product leaflet no. 101, 112 - 117,119

SAAFMedia ™

Mediaoptions Application TargetContaminantsSAAFCarb™ Airports, Pharma

& FoodNitrogen dioxide (NO2), Hydrocarbons (VOC’s), Chlorine (Cl2), Ozone (O3)

SAAFCarb™ MA Plus

Industry Hydrogen sulfide (H2S), Sulfur dioxide (SO2), Chlorine (Cl2) Hydrocarbons (VOC’s)

SAAFCarb™ MA-HT

Industry Hydrogen sulfide (H2S), Sulfur dioxide (SO2), Chlorine (Cl2) Nitrogen dioxide (NO2)

SAAFCarb™ MB Industry Ammonia (NH3), Amines (R-NH)SAAFCarb™ MC Water treatment Chlorine (Cl2)SAAFCarb™ MM Coal fired power

stationsMercury (Hg)

SAAFCarb™ MS Industry & Waste water treatment

Hydrogen sulfide (H2S), Sulfur dioxide (SO2)

SAAFOxidant™ Museums & Libraries

Sulfur dioxide (SO2), Hydrogen sulfide (H2S), Nitric oxide (NO), Formaldehyde (CH2O), Aldehydes and organic acids

• Proprietary blend designed for air quality treatment wthin specific applications• For use in treatment of outside air, recirculation air or specific micro climate enviroments• For more detailed product information: see product leaflet no. 180, 181

SAAFBlend ™ Mediaoptions Application TargetContaminantsSAAFBlend™

GPGeneral Purpose General Gas Removal

SAAFBlend™ WS

Wide Spectrum

Wide Spectrum Gas Removal

- 10 -

Automotive FiltersForBetterAirinPaintSprayingandDryingInstallations

- 11 -

Automotive Filters

• For paintspray and drying booth applications• Fine synthetic media• Multi-layered structure• Classification F5 to EN779:2002• Three versions available F30 (Fine), F55 (Superfine) and F60 (Superfine with scrim)• For more detailed product information: see product leaflet no. 532

AmerTex ® F

• High efficiency panel filter for paint spraying and drying booth applications• Suitable for high temperature applications• Classification G4 to EN779:2002• Lightweight and easy to install• High dust holding capacity• For more detailed product information: see product leaflet no. 503

CGL ® - HT

• Two versions available: Orange for heavy duty industrial applications, Green commercial grade for paint spraying applications• Progressive density glass fibre media• Open weave design enhances paint removal from airstream• Protects exhaust ducts, fans and motors• For more detailed product information: see product leaflet no. 720, 721

Paintstop

- 12 -

Automotive Filters

DriPak ® 25• Used as first stage filter and/or as prefilter to higher efficiency filters in air handling units• Synthetic filter media with high dust holding capacity• Classification G4 according to EN779:2002• All polymer construction – fully incinerable• Long service life• For more detailed product information: see product leaflet no. 545

• Ideal as a first or second stage filter in an air handling unit• Sonic sealed synthetic pocket with high DHC• Classification F5-F8 to EN779:2002• All polymer construction: fully incinerable• Excellent performance in high airflow and high dust loading conditions• Also available as Industrial version for heavy duty applications• For more detailed product information: see product leaflet no. 542

DriPak ® 2000 S

• Meet the requirements of numerous industrial and commercial applications• Glass fibre media with high dust holding capacity and long service life• Classification F5-F9 to EN779:2002• Available with a metal and plastic header• For more detailed product information: see product leaflet no. 543

DriPak ® GF

- 13 -

• High temperature compact filter for applications up to 385 ˚C• Improves air quality in the drying lines• Classification F6-F8 to EN779:2002, E10 to EN1822:2009• Robust, heat resistant aluminized materials• Silicon free construction• For more detailed product information: see product leaflet no. 545, 562

VariCel HT ® - BioCel HT ®

• High temperature air filter for drying tunnel application• High temperature operation max 385 ˚C• Classification F6 and F8 to EN779:2002• Robust, heat resistant aluminized materials• Silicon free construction• For more detailed product information: see product leaflet no. 874

VariCel II HT ®

VariCel V HT ® - BioCel ® V HT • High temperature minipleat filter for the Automotive Industry• High temperature operation max 385 ˚C• Classification F6 and F7 to EN779:2002, E10 to EN1822:2009• Robust, heat resistant aluminized materials• Silicon free construction• For more detailed product information: see product leaflet no. 547, 555

- 14 -

Automotive Filters

Cleanroom Components & FiltersForBetterAirinProcesses

- 15 -

Cleanroom Components & Filters

• Classification E11, H13, H14 to EN1822:2009• Available with MDF and metal cell sides• Non shedding, leak free construction• For more detailed product information: see product leaflet no. 535, 536, 539, 541

• Dedicated cleanroom filter for ultra clean environments• Classification E11, H14, U15, U16 and U17 to EN1822:2009• Available with knife edge, dry seal and fluid seal profile construction• Lightweight and easy to install• For more detailed product information: see product leaflet no. 551, 702, 742

• For use in high air volume applications up to 5000 m3/h• Classification E11, E12, H13, and H14 to EN1822:2009• Fewer filters required, less installation time• High media area, low pressure drop for lower energy costs• For more detailed product information: see product leaflet no. 552, 137, 129, 131

• High capacity compact filters 3000 to 5000 m3/h• Classification E10 - H13 to EN1822:2009• Excellent performance in difficult operating conditions• Lightweight, easy to install• For more detailed product information: see product leaflet no. 365

BioPak - AstroPak

BioCel ® II - AstroCel ® II

BioCel ® III - AstroCel ® III

BioCel ® VXL - AstroCel ® VXL

- 16 -

Dihedral ®

Cleanroom Components & Filters

• For use as main or prefilter in industrial and commercial air handling units• For use as first stage EPA or HEPA filter in Laminar Flow Cabinets• Classification F9 to EN779:2002, E11, H13 and H14 to EN1822:2009• Non corrosive, fully incinerable• For more detailed product information: see product leaflet no. 328

- 17 -

AstroCel ® TM Hood • Hermetically sealed HEPA and ULPA Terminal Filter Hood• Meets the stringent air quality requirements of cleanrooms Classification H14 - U17 to EN1822:2009• Lightweight and easy to install• Available in Room Side Change execution• For more detailed product information: see product leaflet no. 703, 780

• Ultra-high efficiency and low pressure drop for significant energy savings• Made with AAF’s new efficient, strong and durable HELIOR media• Produced and tested in own ISO Class 7 cleanroom environment• Classification H13-H14 (MEGAcel I) and H14-U16 (MEGAcel II) to EN1822:2009• Inert chemical and negligible offgassing properties and high water resistance

MEGAcel I - MEGAcel II

The air filter visual refers to MEGAcel I

• Self contained Fan Filter Unit for use in cleanroom areas• Suitable for AstroCel ® II filters, classification H14 - U17 to EN1822:2009• Low noise level - 52-56 dB(A)• Lightweight aluminium housing• Available in Room Side Change execution• For more detailed product information: see product leaflet no. 001

AstroFan ™ FFU

• Terminal filter module for use in cleanrooms and clean areas• Wide range of sizes available• Rigid, leak free construction• Unique gel seal execution• For more detailed product information: see product leaflet no. 603

PHG Hood

• Easy to install T - Bar Ceiling Grid for Cleanrooms• Suitable for ISO Class 5 - ISO Class 8• Modular design, easy to install• Heavy duty, walkable

Ceiling Grid Systems

• Safe change housing for the removal of radioactive, pathogenic and toxic contaminants• Areas of application are healthcare, pharmaceutical, microelectronic, nuclear industries and biochemical laboratories• Fully enclosing bag system for safe filter change filter with a prefilter• For more detailed product information: see product leaflet no. 741

RPT Housing

Cleanroom Components & Filters

- 18 -

Gas Turbine FiltersForBetterAirtoprotectGasTurbines

- 19 -

Gas Turbine Filters

• Glass fibre media pad for use in engine, turbine and air intake applications• Impregnated progressive density media for high• dust holding capacity• Strong resilient design• For more detailed product information: see product leaflet no. 170

AmerKleen ® M80

• Used as first stage filter and/or as prefilter to more high-end second barrier filters• Synthetic filter media with high dust holding capacity• Classification G4 according to EN779:2002• All polymer construction – fully incinerable• Long service life• For more detailed product information: see product leaflet no. 545

DriPak ® 25

• Heavy duty, high efficient media pad for use in air intake applications• For the removal of mist and free moisture• Glass fibre applied with water resistant binder• Low pressure drop, long service life• Economical in use• For more detailed product information: see product leaflet no. 528

AmerKool ® M81

- 20 -

Gas Turbine Filters

• Heavy duty, high efficiency compact filter with metal seperators for the rotating machinery industry such as centrifugal compressors and gas turbines• Filter dust spot efficiency 66% and 88%• Handles high air volumes op to 3400 m3/h• High dust holding capacity• High burst pressure• For more detailed product information: see product leaflet no. 128

DuraCel ® RM

• Ideal for use as first or second stage prefilter to more high-end filters like DuraCel or DuraVee(H)XL• Synthetic sonic seal filter media with high dust holding capacity• Classification F5-F8 to EN779:2002• All polymer construction: fully incinerable• Excellent performance in high airflow and high dust loading conditions• For more detailed product information: see product leaflet no. 542

DriPak ® 2000 S

• Ideal for use as first or second stage prefilter to more high-end filters like DuraCel or DuraVee(H)XL• Meet the requirements of numerous industrial and commercial applications• Glass fiber media with outstandig performance in difficult operation conditions• Classification F5-F9 to EN779:2002• For more detailed product information: see product leaflet no. 543

DriPak ® GF

- 21 -

Gas Turbine Filters

• Heavy duty, high efficiency compact filter with metal seperators for the rotating machinery industry such as centrifugal compressors and gas turbines• Filter dust spot efficiency 69% up to 96%• Handles high air volumes op to 5100 m3/h• Low average operating resistance• Longer life and less filter change out XW version with plastic faceguards• For more detailed product information: see product leaflet no. 324, 325

• 12” Heavy duty, high efficiency compact filter with hot melt seperators for the rotating machinery industry such as centrifugal compressors and gasturbines• High performance water resistant glass fibre media• Classification F6 - F9 to EN779:2002 and E10 to EN1822:2009• Handles high air volumes up to 4250 m3/h• Fully incinerable sturdy construction• For more detailed product information: see product leaflet no. 327

• 17” Heavy duty, high efficiency compact filter with hot melt seperators for the rotating machinery industry such as centrifugal compressors and gas turbines• High performance water resistant glass fibre media• Classification F6 - F9 to EN779:2002 and E10 to EN1822:2009• Handles high air volumes up to 5100 m3/h• Fully incinerable sturdy construction• For more detailed product information: see product leaflet no. 328

• 12” Heavy duty, high efficiency filter for gas turbines in costal regions• Special water, salt and hydrocarbon resistant glass fibre media• Classification F6 - F9 to EN779:2002 and E10 to EN1822:2009• Fully incinerable sturdy construction• Also available as 17” version for air volumes up to 5100 m3/h

DuraVee ® XL

DuraVee ® HXL

HydroVee ™

DuraCel ® XL - XN

- 22 -

AAF’s air filtration solutions are built on the three pillars of research & development, employee training & development and customer service. Through our innovative, energy efficient and high-quality air filtration solutions, complemented by our active participation and membership of the major industry standard committees, customers can be assured that they are working with a reputable and reliable partner in AAF.

EN779:2002andEN1822:2009All filters marketed by AAF are tested in accordance with the latest European filtration standards. Coarse filters (G1-G4) and Fine filters (F5-F9) are tested to the EN779:2002 standard. EPA (E10-E12), HEPA (H13-H14) and ULPA (U15-U17) filters are tested to EN1822:2009. Please refer to the filter selection guide on page 4.

EuroventAll F grade filters marketed by AAF within Europe are Eurovent certified. These include panel, pocket and compact filters in the class range F5-F9 to EN779:2002. Within this brochure the Eurovent logo will indicate the products that are Eurovent certified. AAF’s Eurovent Certification guarantees the customer that the air filters perform as specified. For more information about the Eurovent Certification Program, please refer to www.eurovent-certification.com

VD16022All AAF filters are independently tested and approved to the hygienic requirements set by the German standard VD16022. This guarantees that AAF filters have no negative effect on the hygienic condition of a ventilation system.

BiostaticTreatedFiltersAAF biostatic treated filters inhibit the growth of fungi and bacteria on filter media. This prevents spores and microbes moving downstream of the air filter and contributes to better indoor air quality.

TFMCustomers can benefit from our Total Filter Management program. With this program AAF will work with its customer to improve quality, streamline total cost of ownership, reduce administration time and to improve control. Your local sales office can inform you about the AAF TFM program in detail.

SAAFA new innovative product range of Gas Phase Filtration products marketed as; ‘SAAF Technology for Nuclear, Biological and Chemical Air Filtration’. Next to particulate filters Gas Phase filtration products contribute to a better clean air within numerous of applications; Indoor Air Quality, Cleanroom applications, Historical storage, Industrial Corrosion Control, Sewage locations.

Consulting&AdvisingYour local AAF sales office can assist you in selecting the best air filtration solution for your application. For further information, please contact your local sales office for which the contact details can be found on the back of this brochure.

AAFGreenAAF understands the importance of going Green. The increasing energy costs and the awareness for a clean environment have lead to a need to conserve energy for a more sustainable environment. Life cycle cost and total cost of ownership become more important with the selection of air filters. AAF will support their customers in selecting the best possible solutions to achieve the required Indoor Air Quality (IAQ) at the lowest possible life cycle cost.

BrochuresandLeafletsIn addition to this brochure AAF International has individual product leaflets which provide more detailed information regarding the (technical) product features of the products on display in this brochure.

- 23 -

International AAF Offices

TheNetherlandsEuropeanRegionalOfficewww.aafeurope.comEmail: info@nl.aafeurope.comAAF-International B.V.P.O. Box 60, 7800 AB EmmenTel: +31 591 686911Fax: +31 591 686936The Netherlands

SalesOfficewww.aafeurope.comEmail: aaf.verkoop@nl.aafeurope.comAAF Verkoop NederlandP. O. Box 101, 7800 AC EmmenTel: +31 591 664466Fax: +31 591 664477

Belgium/Luxembourgwww.aafeurope.comEmail: aaf.verkoop@be.aafeurope.comS. A. AAF N. V.P.O. Box 24, B - 1050 BrusselsTel.: +32 2 426 5451Fax: +32 2 426 7415

Austriawww.aafeurope.comwww.aaf.atEmail: office@aaf.atAAF-Luftreinigigungssysteme Gesellschaft m.b.H.IZ NÖ Süd, Strasse 16, Objekt 61A - 2355 Wr. NeudorfTel.: +43 2236 677628Fax: +43 2236 677628-1

Finlandwww.aafeurope.comEmail: sales@aaf.fiAAF International OyÄyrikuja 3, 01510 VantaaFinland Tel.: +358 (0)10 2290 700Fax: +358 (0)10 2290 720

Francewww.aafeurope.comwww.aaf.frEmail: marketing@aaf-sa.fr AAF S.A.151 Avenue GalliéniF 93170 BagnoletTel.: +33 143 602860Fax: +33 143 620808

Germanywww.aafeurope.comwww.aaf-lufttechnik.deEmail: vertrieb@aaf-lufttechnik.deAAF-Lufttechnik GmbHP.O. Box 130618 D 44316 DortmundTel.: +49 231 921033-0Fax: +49 231 921033-23

SaudiArabiawww.aafeurope.comAAF Saudi Arabia Ltd.P.O. Box 59336, Riyadh 11525Tel.: +966 1 2651116Fax: +966 1 2650005

USA/Canadawww.aafintl.comAmerican Air Filter10300 Ormsby Park Place # 600POB 35690Louisville, KY 40232-5690Tel.: +1 502 637 0011Fax: +1 502 637 0520

MexicoAAF-SA de CVApartado Postal no. 292, TlalnepantlaEdo de Mexico, C.P. 5040 MexicoTel.: +52 5 5655200Fax: +52 5 3905814

RepublicofSouthAfricawww.aafeurope.comwww.gosair.co.zaEmail: sales@gosair.co.zaGosair Filter Systems (Pty) Ltd437 Greenhills Industrial EstateSam Green Road,Tunney Ext 6, GermistonP O Box 12648, Chloorkop 1624 South AfricaTel: +27 11 822 6709Fax: +27 11 822 1514

China (P.R. China)www.aafchina.comwww.aafasia.comEmail:sozhou@aafchina.com AAF (Suzhou) Co. Ltd.No.116 Changyang Street SIP Suzhou 215126P.R. ChinaTel: +86 512 6281 8288Fax: +86 512 6281 8388

Indiawww.aafasia.com AAF India Private Ltd.No. 149/150, Bandapura Village,Marasoor Post, Anekal Taluk,Bangalore - 562106, KarnatakaIndiaTel.: +91 80 2782 0787Fax: +91 80 2782 0788

Malaysia www.aafasia.comEmail: enquires@aafmal.comAmerican Air Filter Manufacturing Sdn BhdLot 6, Jalan Pengapit 15/19Seksyen 1540000 Shah Alam, SelangorMalaysiaTel: +603 5039 7777Fax: +603 5511 8633

GreatBritain&Eirewww.aafeurope.comwww.aafgb.comAAF-Ltd.Bassington Lane, CramlingtonNorthumberland NE23 8AFTel.: +44 1670 713477Fax: 44 1670 714370

Greecewww.aafeurope.comEmail: aaf@aaf.gr AAF-Environmental Control Epe18th km Spata Ave.,GR 19004 Spata, AthensTel.: +30 210 6632015 / 6635057 / 6635088Fax: +30 210 6635109

Italywww.aafeurope.com Email: informazioni@aaf-europe.comAAF-S.r.l.Via E. Mattei 11, I 22076 Mozzate (CO)Tel.: +39 0331838611Fax: +39 0331 838644

Spain&Portugalwww.aafeurope.comwww.aaf.esEmail: info@aaf.es AAF S.A.Severo Ochoa 38, Edificio B2, Planta 2, Modulo 6-7P.A.E. Casablanca I28108 Alcobendas - MadridTel.: +34 916624866Fax: +34 916624275

Turkeywww.aafeurope.comwww.aaf.com.trEmail: bilgi@aaf.com.trAAF Hava Filtreleri ve Ticaret A.S.Bagdat Caddesi Hasan Amir Sokak 4Dursoy is Merkezi Kat. 2/6-734724 Kiziltoprak-IstanbulTel.: +90 216 449 51 64 / 65Fax: +90 216 449 5150

Middle-Eastwww.aafeurope.comEmail: middleeast.sales@nl.aafeurope.comAAF-International B.V.P.O. Box 60, 7800 AB EmmenTel: +31 591 686911Fax: +31 591 686936

UnitedArabEmirates(UAE)www.aafeurope.comEmail: aafme@emirates.net.aeAAF International Air Filtration Systems LLCPOB 28564Dubai, UAETel.: +971 4 339 7688Fax: +971 4 339 7881

0135000001©2011AAFInternational. All rights reserved. AAF has a policy of continuous product research and improvement and reserves the right to change design and specifications without notice.