Dehydration Solutionsfor Gas Applications
Natural GasLandfillsDigestersSpecial Applications
TM
Design Fabrication Technical Support60 Years of Experience
Distributed by: Air & Vacuum Process, Inc.Phone Toll Free (866)660-0208Phone Local (281)866-9700 Fax (281)[email protected]
Series Desiccant Dehydrator SystemsSeries desiccant dehydrator systems reduce desiccant costs and improveperformance by using a different desiccant bed in each tower. This openskid package is suitable for most temperatures and includes a ladderassembly for easy desiccant replenishment.
The Van Gas SolutionMaximize your profitability and meet
sales gas specifications with a custom
Van Gas solution for your particular gas
dehydration needs. Put our extensive
in-house engineering and manufacturing
capabilities to work for you today.
Coal Bed Methane Gas DehydratorsWhen gas temperatures are high and pressures are low, coal bedmethane systems remove heat, moisture and particulates to provideoptimal gas quality. With a small foot print and no moving parts, theyare minimally intrusive to the environment while providing an addedmeasure of safety where explosion-proof operation is needed.
Instrument & ControlDryersFor flows of 25 to 150 scfm,adsorbent desiccant gas dryersare ideal for controlling fuel gasand instrument gas applications.
Wellhead Gas DehydratorsDespite severe expansion cooling, the natural gasinside this pipeline keeps flowing with a Van Gas dryerto help maximize wellhead profitability. When possible,dry at higher pressures, then pressure reduce for mostefficient and cost effective operation.
Why Desiccantis better thanGlycolNo BTEX Emissions
Consistent PerformanceWith Variable Flows &Pressures
Lower Operating Costs
Custom-EngineeredEquipment
Ease of Maintenance
Lower Capital Investment
End Point Gas DryersThere’s a Van Gas solution to your gas dehydrationneeds, even when pressures exceed the limits ofother systems. These gas dryers are rated to 4000psi at -40°F ambient. Units for even higherpressures are available.
Desiccant Dehydrator Production UnitsDesiccant dehydrator production units meet sales gas specificationswith no BTEX emissions. Designed to operate in subfreezingambient temperatures, these units include features to reducedesiccant consumption and prevent desiccant migration. Built tohandle flows to 5 million cf/day.
Chiller/Desiccant Gas Dryer SystemsMeet moisture line specifications when gas is at highertemperatures or very low pressures (5 to 100 psig) with achiller/desiccant gas dryer combination unit. The optimalsolution for low desiccant consumption.
PLD Series Gas DryersProtect meters, regulators, valves, compressorsand instruments from moisture damage with astandard PLD Series gas dryer from the originalproducer of absorbent desiccant dryers—Van Gas Technologies. Also ask about our3-phase separators.
Gas FiltrationFrom fine coalescing to gross particulate, VanGas offers a full range of gas filtration choicesand grades for peak system performance.
Extensive Custom FabricationCapabilitiesPut our expertise in custom fabrication to workfor you. Let us engineer and build the rightsolution for your particular gas application.
VanGasCapabilities1/0305/VAS© 2005 Van Gas Technologies
Van Gas—The First Namein DesiccantVan Gas has invested more than 60 yearsperfecting our formulas. In fact, we originatedabsorbent desiccant technology. Trust yoursystem to Van Gas for the best desiccantavailable on the market today.
A division of Van Air Inc.2950 Mechanic Street, Lake City, PA 16423 USA
Phone 800/840-9906 Fax 814/[email protected]
TM
Let’s get started today.Call Van Gas Technologies
at 800/840-9906.Distributed by: Air & Vacuum Process, Inc.Phone Toll Free (866)660-0208 PhoneLocal (281)866-9700 Fax (281)[email protected]
