Home > Documents > Pipes, Fittings, Valves - Eurofusion AS Simona Pipes, Fittings...6 SIMONA Pipes, Fittings, Valves...

Pipes, Fittings, Valves - Eurofusion AS Simona Pipes, Fittings...6 SIMONA Pipes, Fittings, Valves...

Date post: 06-Mar-2018
Category:
Author: lykhuong
View: 220 times
Download: 2 times
Share this document with a friend
Embed Size (px)
of 56 /56
Pipes, Fittings, Valves
Transcript
  • Pipes, Fittings, Valves

  • SIMONA Your Partner for Piping Systems

  • 05/2004 Pipes, Fittings, Valves SIMONA 3

    Content

    4 SIMONAPipes, Fittings and Valves

    Piping Systems for all Applications

    6 Quality, Service, Innovation

    7 Approvals

    8 Norms

    10 Admissible working pressures

    for pipes and fittings

    11 Technical data

    12 Key

    Delivery programme pipes

    14 PE 100 Pressure pipes

    15 PE 100 Pressure pipes for drinking water

    16 PE 100 Coils for drinking water and waste water

    17 PE 80 Pressure pipes

    18 PE 80 CoEx Sewer pipes

    19 PE 100/PE 80 SPC-Pipes

    20 PE 80 Electrically conductive pressure pipes

    21 PE 80 Effluent pipes (HT)

    22 PP Pressure pipes

    23 PVDF Pressure pipes

    24 PVDF Liner pipes

    25 PPs Ventilation pipes

    26 PVC-U Pressure pipes

    27 PVC-GLAS Pressure pipes

    28 E-CTFE Pressure pipes

    Delivery programme fittings

    30 PE 100/PE 80 Fittings with elongated spigots

    for butt and electro fusion welding

    32 PE 100/PE 80 Fittings with short spigots

    for butt welding

    34 PE 100/PE 80 Special fittings

    35 PE 100 Fittings for electro fusion welding

    35 Welding machines and accessories

    for electro fusion welding

    36 PP Fittings with elongated spigots

    for IR- and butt welding

    37 PP Fittings for electrofusion welding

    38 PP Fittings with short spigots for butt welding

    40 PP Special fittings

    41 PE 80/PP Fittings for socket welding

    42 Fittings for flange assemblies

    PE 80/PE 100/PP Piping systems

    43 Fittings for flange assemblies PVDF piping

    systems

    44 PVDF Fittings with elongated spigots

    for IR- and butt welding

    46 PVDF Fittings for socket welding

    47 PPs Fittings for ventilation pipes

    48 Double containment piping systems

    48 Systems for soak-away pipes and land-fill sites

    Delivery programme valves

    50 PP Valves manually operated

    51 PVDF Valves manually operated

    52 Butterfly valves

    52 Accessoires for valves

    53 We are at your Service

    54 SIMONA worldwide

  • In waste water disposal you can

    take advantage of pressure

    pipes and open channels made

    of PE 80 and PE 100; within the

    area of drinking water supply,

    this range is supplemented by

    the material PP. For solutions in

    the field of chemical apparatus

    and installation engineering we

    offer you pipeline components

    which have a proven track record

    in everyday applications.

    Owing to our state-of-the-art

    extrusion technology, we are

    able to extrude pipes up to a

    diameter of 1000 mm. The pos-

    sible wall thicknesses range

    from 1.8 mm to 60 mm. In addi-

    tion to our standard dimensions,

    we can offer you customised

    sizes that are tailored to your

    individual requirements.

    4 SIMONA Pipes, Fittings, Valves 05/2004

    SIMONAPipes, Fittings and Valves Piping Systems for all Applications

    PE-EL exit air ducts

    For the construction of piping

    systems, SIMONA offers you a

    comprehensive product portfolio

    comprising pipes, fittings and

    valves made of various materi-

    als. They range from PE, PP and

    PVC to the partially fluorinated

    materials PVDF and E-CTFE.

    This diversity of materials will

    also meet your application-

    specific requirements, e.g.:

    corrosion resistance

    tension crack resistance

    permanent watertight seal or

    chemical resistance.

    PE 80 sewer pipe

    Welding preparation for double containment piping

    PP pipe system for brewery sewerage

    PE delivery line on floating pontoons

  • Our high-end range of pipes is

    complemented by our comprehen-

    sive portfolio of fittings and

    valves in materials PE, PP and

    PVDF.

    For permanently watertight

    pipes, we offer you fittings for

    the following connection sys-

    tems:

    Butt welding

    Electric socket welding

    Electrofusion fittings

    Socket welding

    Infra-red welding

    Flange assemblies.

    Our range includes complete

    piping systems from a single

    source for:

    Industrial pipeline construc-

    tion, e.g. for the conveyance

    of aggressive chemicals

    Waste water disposal

    Drinking water supply

    Ventilation systems

    Landfill engineering and

    Sewer repairs.

    PVDF industrial pipe system

    05/2004 Pipes, Fittings, Valves SIMONA 5

    PP tank connections

    PE 80 ovoid duct

    PP swimming pool pipework PE 80 co-extruded pipe relining

    In addition, we can offer you a

    special package of products and

    services for repairing leaking

    pipework systems:

    Pipes in various lengths for a

    range of joining methods

    Special sizes of pipe adapted

    to the standard nominal dia-

    meters of other materials

    Co-extruded pipes for

    improved illumination during

    internal camera inspection

    SPC pipes with a protective

    jacket made of modified

    polypropylene and a poly-

    ethylene inner pipe

    Ovoid ducts for repairing

    damaged sewers.

  • 6 SIMONA Pipes, Fittings, Valves 05/2004

    Quality, Service, Innovation

    The quality and environmental mana-gement system of SIMONA AG is cer-tified to DIN EN ISO 9001 : 2000and DIN EN ISO 14001 : 1996

    SIMONA AG is one of the leading

    manufacturers of semi-finished

    plastics. Our portfolio of products

    covers a wide range of applica-

    tions:

    Sheets in thicknesses from

    0.5 to 200 mm

    Pipes in diameters from

    10 to 1000 mm

    Fittings in diameters from

    16 to 1000 mm

    Solid rods in diameters from

    6 to 800 mm

    Hollow rods in diameters from

    110 to 510 mm

    Profiles and welding rods Electrofusion fittings Valves

    The materials used are PE, PP,

    PVC-U, foam PVC-U, PETG, PVDF

    and E-CTFE as well as special

    materials, i. e. for applications in

    the orthopaedic sector.

    SIMONA AG with its head office

    in the Rhineland-Palatine Kirn

    (Germany) produces sheets,

    rods, profiles and welding rods in

    works I and II. Using technologi-

    cally advanced equipment and

    machinery the pipes and fittings

    production is situated in works III

    in Ringsheim in Baden-Wrttem-

    berg. To complement this, our

    worldwide distribution network

    with subsidiaries and sales part-

    ners guarantees a service close

    to the customer on all continents.

    The quality of our products and

    services is one of our utmost

    priorities. We, therefore, critically

    audit and improve our quality

    management on a continual

    basis. To us this is a never

    ending process.

    The high demands that we set

    are not limited to our own

    organisation but extend to the

    needs and requirements of our

    customers. The quality standard

    of our services is the decisive

    factor within our product range.

    Our sense of quality combines

    the project development, the

    purchase of raw materials, the

    production, the dispatch, the

    advice given during projecting

    on the spot and the cooperation

    with our customers.

    So, we are proud to state that

    we have achieved the DIN EN ISO

    9001 certification as the first

    enterprise of our kind and that

    our quality management will be

    constantly optimized by external

    and internal audits. Certification

    of our environmental management

    system in accordance with DIN EN

    ISO 14001: 1996 also bears tes-

    timony to the pioneering role we

    have assumed within the global

    arena.

    The quality management system ofSIMONA AG in compliance with thePressure Equipment Directive is certi-fied to 97/23/EG Annex I, para. 4.3.

  • 05/2004 Pipes, Fittings, Valves SIMONA 7

    Approvals

    Approvals test mark number name of product

    Pipes

    DIBt-approval Z-40.23-311 PE-HD Pipes

    Z-40.23-325 PP Pipes

    Z-40.23-323 PVDF Pipes

    P-BWU03-I-16.5.8 PPs Ventilation pipes

    DVGW-approval DVGW-registration number PE 80/PE 100 Gas pipes

    DG-8106AS2211

    DG-8111AS2212

    DW-8136AU2235 PE 80/PE 100 Drinking water pipes

    DW-8141AU2236

    DW-8146AU2237

    TV-certification MUC-KSP-A 006 PE 100/PE 80/PP Pipes

    MUC-KSP-A 025 PE 100/PE 80 SPC-Pipes

    FM-approval 3003707, class number 4910 PVDF Pipes

    PE-Fittings

    DIBt-approval Z-40.23-322 PE-HD

    DVGW-approval DV-8601AR2079 PE 80/PE 100 injected fittings, PE 80 E-Fitting

    production group 121

    DV-8601AR2080 PE 80/PE 100 injected fittings, PE 80 E-Fitting

    production group 122

    DV-8601AR2081 PE 80/PE 100 injected fittings, PE 80 E-Fitting

    production group 123

    TV-certification MUC-KSP-A 006 PE 100/PE 80 Fittings

    Water Byelaws Scheme Approval 9803504, 9909503 PE 80 injected fittings

    01105112 PE 100 injected fittings

    9603509 PE 100 injected fittings

    PIIP-approval 301 PIIP pren 1555-3 PE 100 injected fittings

    301 PIIP pren 12201-3

    IIP/UNI-approval 301 UNI 10910 PE 100 injected fittings

    PP-Fittings

    DIBt-test mark Z-40.23-326 PP injected fittings

    TV-certification MUC-KSP-A 006 PP Fittings

    PVDF-Fittings

    DIBt-test mark Z-40.23-324 PVDF injected fittings up to d 160 mm

    FM-approval 3003707, class number 4910 PVDF Fittings

    Remark: Some of the PE 100 fittings are indicated with the SDR denomination SDR 17. These items are produced within the tolerance range of SDR 17 andSDR 17,6. These fittings can consequently be connected to component parts of pressure rating SDR 17 or 17,6 by heated element butt welding and,if suitable, by heated coil welding (with elongated spigots) as well.

    SIMONA pipes and fittings are registrated by the German Instituts Deutsches Institut fr Bautechnik Berlin and DVGW for gas and water.

  • 8 SIMONA Pipes, Fittings, Valves 05/2004

    Test group category Norm

    PE 80/PE 100 Pressure pipes and coils DIN 8074/8075

    PE 80/PE 100 SPC-pipes Inner pipe acc. to DIN 8074/8075, DIN 19537

    DIN EN 12201, DIN EN 13244

    PE-EL Pressure pipes DIN 8074/8075

    PE 100/PE 80 Waste water pressure pipes DIN 8074/8075, DIN EN 13244

    PE 100/PE 80 Drinking water pipes DIN 8074/8075, DIN EN 12201

    PE 80 CoEx Sewer pipes acc. to DIN 8074/8075, DIN 19537

    PE 80 Effluent pipes DIN 8074/8075, DIN EN 1519

    PP Pressure pipes DIN 8077/8078

    PVDF Pressure pipes ISO 10931

    PVC Pressure pipes DIN 8061/8062

    PPs Ventilation pipes DIN 4102 building material class B1; acc. to DIN 8077/8078

    E-CTFE Pressure pipes acc. to ISO 10931

    Pipes

    Norms

  • 05/2004 Pipes, Fittings, Valves SIMONA 9

    Test group category Norm

    Pipe joints and pipe parts for pressure pipes, made of polyethylene DIN 16963

    Fittings in segmentally manufactured bends for butt welding DIN 16963, Part 1

    Fittings in segmentally manufactured, swept tees and branches for butt welding DIN 16963, Part 2

    Fittings made of pipe formed bends for butt welding DIN 16963, Part 3

    Stub flanges for filament butt welding, flanges, seals DIN 16963, Part 4

    Fittings, injection moulded, for butt welding DIN 16963, Part 6

    Elbows, injection moulded, for socket welding DIN 16963, Part 8

    Tees, injection moulded, for socket welding DIN 16963, Part 9

    Sockets and end caps, injection moulded, for socket welding DIN 16963, Part 10

    Stub flanges, flanges, sealing rings for socket welding DIN 16963, Part 11

    Reducers machined for butt welding DIN 16963, Part 13

    Reducers, injection moulded, for socket welding DIN 16963, Part 14

    Fittings made of polyethylene for underground pipes and pipework DIN 19537, Part 1

    Pipe joints and pipework parts for pressure pipes made of polypropylene DIN 16962

    Fittings in segmentally manufactured bends for butt welding DIN 16962, Part 1

    Fittings in segmentally manufactured, swept tees and branches for butt welding DIN 16962, Part 2

    Fittings made of pipe formed bends for butt welding DIN 16962, Part 3

    Stub flanges for filament butt welding, flanges, seals DIN 16962, Part 4

    Elbows, injection moulded, for socket welding DIN 16962, Part 6

    Tees, injection moulded, for socket welding DIN 16962, Part 7

    Reducers, injection moulded, for socket welding DIN 16962, Part 9

    Fittings, injection moulded, for butt welding DIN 16962, Part 10

    Stub flanges, flanges, sealing rings for socket welding DIN 16962, Part 12

    Piping systems for industrial applications, made of PVDF ISO 10931-3

    Fittings

  • 10 SIMONA Pipes, Fittings, Valves 05/2004

    Admissible Working Pressuresfor Pipes and Fittings

    1 PN is valid for water at 20C and a calculated life expectancy of 50 years.

    The europeanized norms

    DIN 8074/8075 (PE), DIN 8077/

    8078 (PP) and DIN 8061/8062

    (PVC-U) as well as the following

    applications oriented DIN-EN

    and ISO standards distinguish

    between different safety factors

    leading to different PN charges

    at a given geometry, i.e. outer

    diameter wall thickness ratio

    (SDR).

    The following table shows these

    connections. In practise, the user

    can choose the security factor

    according to the application.

    Further details are indicated in

    our technical catalogue Pipes

    and Fittings. In case of welded

    fittings made of pipes pressure

    reduction factors may arise.

    Correlation between SDR and PN

    PE 80 PE 100 PE 80 PP-H 100 PP-R 80 PVDF PVC-U E-CTFE

    Safety factor S 1.25 1.25 1.6 1.6 1.25 2.0 2.5

    SDR PN1

    51 2.5 3.2 4

    41 3.2 4 2.5 3.1 3.9

    33 4 5 3.2 3.9 4.9 10 ~ 6

    26 5 6.3 4 5 6.2

    22 6 ~ 7.6

    21 6.3 8 5 16 10 10

    17.6 ~ 7.6 ~ 9.7 6 7.5 9.3

    17 8 10 6.3

    13.6 10 12.5 8 ~ 16

    11 12.5 16 10 12.5 15.5

    9 ~ 16 20 12.5 ~ 25

    7.4 20 25 ~ 16 19.8 24.5

    6 25

  • 05/2004 Pipes, Fittings, Valves SIMONA 11

    Technical data

    Technical data PE 80 PE 100 PE-EL PP-H 100 PP-R 80 PPs PVDF E-CTFE

    Density, g/cm3 , ISO 1183 0.955 0.958 0.99 0.91 0.90 0.95 1.78 1.68

    Yield stress, MPa, DIN EN ISO 527 22 23 26 33 24 32 56 31

    Elongation at yield, %, 9 9 7 8 10 8 6 4

    DIN EN ISO 527

    Elongation at break, %, DIN EN ISO 527 300 300 60 70 70 70 22 125

    Tensile-E-Modus, MPa, DIN EN ISO 527 800 900 1100 1700 800 1300 1950 1650

    Impact strength, kJ/m2, without without without without without without without without

    DIN EN ISO 179 break break break break break break break break

    Notched impact strength, kJ/m2, > 20 > 25 5 > 7 20 > 4 12

    DIN EN ISO 179

    Ball indentation hardness, MPa, 40 50 70 45 70 120 56

    DIN EN ISO 2039-1

    Shore hardness, D, ISO 868 63 61 63 72 65 72 78 74

    Average thermal coefficient of 1.8 10-4 1.8 10-4 1.8 10-4 1.6 10-4 1.6 10-4 1.6 10-4 1.3 10-4 0.5 10-4

    elongation, K-1, DIN 53752

    Thermal conductivity, W/m K, DIN 52612 0.38 0.38 0.22 0.22 0.22 0.14 0.15

    Dielectric strength, kV/mm, 47 22 52 52 22 25

    IEC 243-1

    Surface resistance, Ohm, 1014 < 106 1014 1014 1014 1013 1015

    DIN IEC 167

    Fire behaviour, DIN 4102 B2 B2 B2 B2 B2 B1 B1 flame

    retardant

    Physiological acceptability yes yes no yes yes no yes yes1

    acc. to BgVV

    Chemical resistance conforms conforms conforms conforms conforms conforms conforms conforms

    acc. to DIN 8075 suppl.

    Temperature range, C 40 up 40 up 20 up 0 up 0 up 0 up 30 up 40 up

    + 80 + 80 + 80 + 100 + 80 + 100 + 140 + 150

    1 no certificate of BgVV

  • 12 SIMONA Pipes, Fittings, Valves 05/2004

    Materials

    PE Polyethylene

    PE-EL Polyethylene, electrically conductive

    PP-H Polypropylene, homopolymer

    PP-R Polypropylene, random copolymer

    PPs Polypropylene, flame retardant

    PVC-U Polyvinylchloride

    PVC-GLAS Polyvinylchloride, transparent

    PVC-GLAS-LZ Polyvinylchloride, transparent, physiological acceptable

    PVDF Polyvinylidenefluoride

    E-CTFE Ethylene-chlorotrifluorethylene

    Norms/guidelines

    ANSI American National Standard Institute

    DIBt Deutsches Institut fr Bautechnik (German association for building technique)

    DIN Deutsche Industrie Norm (German industrial standard)

    DVGW Deutscher Verband fr Gas und Wasser (German association for gas and water applications)

    EN European standard

    FM Factory Mutual Research

    ISO International Standardization Organisation

    JIS Japan Industry Standard

    TV Technischer berwachungsverein Sddeutschland

    WRc WRc Evaluation & Testing Centre

    Abreviations, measures and dimensions

    d Outer diameter of pipe

    DN Nominal diameter

    e Wall thickness

    kg Kilogram per piece

    kg/m Kilogram per meter

    m Meter

    mm Millimeter

    NPT Threaded female/male end conical

    PN Nominal pressure

    R Threaded male end cylindric

    Rp Threaded female end cylindric

    S Safety factor

    SDR Standard Dimension Ratio (corresponds to the outer diameter of pipe divided by wall thickness)

    PU Packing unit

    Materials (seals)

    EPDM Ethylene-propylene-caoutchouc

    FPM Fluorocaoutchouc

    NBR Nitrile rubber

    All measures in our delivery programme in mm.

    Key

  • Pipes

  • 14 SIMONA Pipes, Fittings, Valves 05/2004

    PEPipes

    PE 100 Pressure pipes

    Material PE 100

    Colour black

    Dimensions DIN 8074,

    standard length: 6 m, also in 12 m length

    Remark terms of delivery on request,

    other lengths on request

    DIBtapproved

    Pressure pipe SDR 41 SDR 33 SDR 26 SDR 17 SDR 11 SDR 7,4

    d e e e e e e

    mm mm ~ kg/m mm ~ kg/m mm ~ kg/m mm ~ kg/m mm ~ kg/m mm ~ kg/m

    10 1.8 0.048

    12 1.8 0.060

    16 1.8 0.084

    20 1.9 0.113

    25 2.3 0.172

    32 1.9 0.189 2.9 0.273

    40 1.8 0.229 2.4 0.298 3.7 0.433

    50 2.0 0.316 3.0 0.457 4.6 0.672 6.9 0.944

    63 2.0 0.402 2.5 0.499 3.8 0.727 5.8 1.060 8.6 1.480

    75 1.9 0.461 2.3 0.556 2.9 0.681 4.5 1.020 6.8 1.480 10.3 2.110

    90 2.2 0.646 2.8 0.798 3.5 0.986 5.4 1.470 8.2 2.140 12.3 3.020

    110 2.7 0.950 3.4 1.180 4.2 1.440 6.6 2.180 10.0 3.170 15.1 4.530

    125 3.1 1.240 3.9 1.530 4.8 1.860 7.4 2.780 11.4 4.110 17.1 5.820

    140 3.5 1.560 4.3 1.890 5.4 2.340 8.3 3.490 12.7 5.120 19.2 7.310

    160 4.0 2.020 4.9 2.450 6.2 3.070 9.5 4.560 14.6 6.720 21.9 9.520

    180 4.4 2.510 5.5 3.090 6.9 3.820 10.7 5.760 16.4 8.490 24.6 12.000

    200 4.9 3.080 6.2 3.870 7.7 4.730 11.9 7.110 18.2 10.500 27.4 14.900

    225 5.5 3.890 6.9 4.820 8.6 5.940 13.4 9.010 20.5 13.300 30.8 18.800

    250 6.2 4.870 7.7 5.970 9.6 7.360 14.8 11.000 22.7 16.300 34.2 23.200

    280 6.9 6.030 8.6 7.460 10.7 9.180 16.6 13.900 25.4 20.400 38.3 29.100

    315 7.7 7.570 9.7 9.450 12.1 11.700 18.7 17.600 28.6 25.800 43.1 36.800

    355 8.7 9.630 10.9 11.900 13.6 14.800 21.1 22.300 32.2 32.800 48.5 46.700

    400 9.8 12.200 12.3 15.200 15.3 18.700 23.7 28.200 36.3 41.600 54.7 59.300

    450 11.0 15.400 13.8 19.100 17.2 23.700 26.7 35.700 40.9 52.700 61.5 75.000

    500 12.3 19.100 15.3 23.600 19.1 29.200 29.7 44.200 45.4 65.100

    560 13.7 23.800 17.2 29.700 21.4 36.600 33.2 55.300 50.8 81.500

    630 15.4 30.100 19.3 37.400 24.1 46.300 37.4 70.000 57.2 103.200

    710 17.4 38.300 21.8 47.600 27.2 58.800 42.1 88.900

    800 19.6 48.600 24.5 60.200 30.6 74.500 47.4 112.700

    900 22.0 61.200 27.6 76.300 34.4 94.200 53.3 142.500

    1000 24.5 75.800 30.6 93.900 38.2 116.300 59.3 176.100

  • 05/2004 Pipes, Fittings, Valves SIMONA 15

    PEPipes

    PE 100 Pressure pipes for drinking water

    Material PE 100

    Colour blue ~ RAL 5005

    Dimensions DIN 8074,

    standard length: 6 m

    Remark terms of delivery on request,

    other lengths on request

    Pressure pipe SDR 17 SDR 11

    d e e

    mm mm ~ kg/m mm ~ kg/m

    20 1.9 0.113

    25 2.3 0.172

    32 1.9 0.189 2.9 0.274

    40 2.4 0.298 3.7 0.433

    50 3.0 0.457 4.6 0.672

    63 3.8 0.727 5.8 1.060

    75 4.5 1.020 6.8 1.480

    90 5.4 1.470 8.2 2.140

    110 6.6 2.180 10.0 3.170

    125 7.4 2.780 11.4 4.110

    140 8.3 3.490 12.7 5.120

    160 9.5 4.560 14.6 6.720

    180 10.7 5.760 16.4 8.490

    200 11.9 7.110 18.2 10.500

    225 13.4 9.010 20.5 13.300

    250 14.8 11.000 22.7 16.300

    280 16.6 13.900 25.4 20.400

    315 18.7 17.600 28.6 25.800

    355 21.1 22.300 32.2 32.800

    400 23.7 28.200 36.3 41.600

    450 26.7 35.700 40.9 52.700

    500 29.7 44.200 45.4 65.100

    560 33.2 55.300 50.8 81.500

    630 37.4 70.000 57.2 103.200

    710 42.1 88.900

    800 47.4 112.700

    900 53.3 142.500

    1000 59.3 176.100

    DIBtapproved

  • 16 SIMONA Pipes, Fittings, Valves 05/2004

    PEPipes

    PE 100 Coils for drinking water and waste water

    Material PE 100

    Colour black with brown stripes for waste water

    blue for drinking water

    Dimensions DIN 8074

    standard length: 100 m

    Remark our injection moulded fittings up to d 160 mm are also

    approved by DVGW, registration no.:

    DV-8601AR2079, DV-8601AR2080, DV-8601AR2081

    DVGW-registration no. by external certification for drinking

    water: DW-8136AU2235, DW-8141AU2236, DW-8146AU2237

    Pressure pipe Nominal diameter coil dimension SDR 17 SDR 11

    d DN Da Di b e e

    mm mm inch mm mm mm mm kg/m mm kg/m

    20 15 1/2 900 650 170 1.9 0.113

    25 20 3/4 1000 650 200 2.3 0.172

    32 25 1 1200 900 250 1.9 0.189 2.9 0.273

    40 32 1 1/4 1350 900 300 2.4 0.298 3.7 0.433

    50 40 1 1/2 1550 1000 330 3.0 0.457 4.6 0.672

    63 50 2 1950 1400 350 3.8 0.727 5.8 1.06

    75 65 2 1/2 2550 1900 420 4.5 1.20 6.8 1.48

    90 80 3 2600 2000 600 5.4 1.47 8.2 2.14

    110 100 4 2900 2200 770 6.6 2.18 10.0 3.17

    125 100 4 3000 2200 820 11.4 4.11

    160 125 5 3000 2000 1100 14.6 6.72

    180 150 6 3100 2000 1150 16.4 8.49

  • 05/2004 Pipes, Fittings, Valves SIMONA 17

    PEPipes

    PE 80 Pressure pipes

    Material PE 80

    Colour black

    Dimensions DIN 8074, DIN 19537 part 1

    standard length: 6 m, also in 12 m length

    Remark terms of delivery on request,

    other lengths on request,

    in case of an order statics data according

    to ATV A 127 can be issued with charge

    DIBtapproved

    Pressure pipe SDR 41 SDR 33 SDR 26 SDR 17,6 SDR 11 SDR 7,4

    d e e e e e e

    mm mm ~ kg/m mm ~ kg/m mm ~ kg/m mm ~ kg/m mm ~ kg/m mm ~ kg/m

    10 1.8 0.051

    12 1.8 0.064

    16 1.8 0.084

    20 1.8 0.107 1.9 0.112

    25 1.8 0.138 2.3 0.171

    32 1.8 0.179 2.9 0.271

    40 1.8 0.227 2.3 0.285 3.7 0.427

    50 2.0 0.314 2.9 0.441 4.6 0.666 6.9 0.936

    63 2.0 0.399 2.5 0.495 3.6 0.688 5.8 1.050 8.6 1.470

    75 1.9 0.457 2.3 0.551 2.9 0.675 4.3 0.977 6.8 1.470 10.3 2.090

    90 2.2 0.640 2.8 0.791 3.5 0.978 5.1 1.390 8.2 2.120 12.3 3.000

    110 2.7 0.942 3.41 1.170 4.21 1.430 6.3 2.080 10.0 3.150 15.1 4.490

    125 3.1 1.230 3.91 1.510 4.81 1.840 7.11 2.660 11.4 4.080 17.1 5.780

    140 3.5 1.550 4.31 1.880 5.41 2.320 8.01 3.340 12.7 5.080 19.2 7.250

    160 4.0 2.000 4.91 2.420 6.21 3.040 9.1 4.350 14.6 6.670 21.9 9.440

    180 4.4 2.480 5.5 3.070 6.9 3.790 10.21 5.480 16.4 8.420 24.6 11.900

    200 4.9 3.050 6.21 3.840 7.7 4.690 11.4 6.790 18.2 10.400 27.4 14.800

    225 5.5 3.860 6.91 4.780 8.61 5.890 12.81 8.550 20.5 13.100 30.8 18.600

    250 6.2 4.830 7.71 5.920 9.6 7.300 14.2 10.600 22.7 16.200 34.2 23.000

    280 6.9 5.980 8.61 7.400 10.71 9.100 15.91 13.200 25.4 20.300 38.3 28.900

    315 7.7 7.510 9.71 9.370 12.1 11.600 17.9 16.700 28.6 25.600 43.1 36.500

    355 8.7 9.550 10.91 11.800 13.61 14.600 20.11 21.200 32.2 32.500 48.5 46.300

    400 9.8 12.100 12.3 15.100 15.3 18.600 22.7 26.900 36.3 41.300 54.7 58.800

    450 11.0 15.200 13.81 19.000 17.21 23.500 25.51 34.000 40.9 52.300 61.5 74.400

    500 12.3 19.000 15.3 23.400 19.1 28.900 28.4 42.000 45.4 64.500

    560 13.7 23.600 17.21 29.400 21.41 36.200 31.71 52.500 50.8 80.800

    630 15.4 29.900 19.31 37.100 24.11 45.900 35.71 66.500 57.2 102.400

    710 17.4 38.000 21.81 47.200 27.21 58.400 40.21 84.400

    800 19.6 48.100 24.51 59.700 30.61 73.900 45.31 107.100

    900 22.0 60.700 27.61 75.600 34.41 93.400 51.0 135.500

    1000 24.5 75.200 30.61 93.100 38.21 115.300 56.7 167.400

    1 acc. to DIN 19537

  • 18 SIMONA Pipes, Fittings, Valves 05/2004

    PEPipes

    PE 80 CoEx Sewer pipes

    Material PE 80, homogene extrusion

    Colour light grey with a black protective coat

    Dimensions acc. to DIN 8074/8075 and DIN 19537,

    standard length: 6 m

    Remark other dimensions,

    colours and lengths on request

    Pipe Nominal diameter SDR 26 SDR 17,6

    d DN e e

    mm mm ~ kg/m mm ~ kg/m

    160 150 9.11 4.35

    180 150 10.2 5.48

    225 200 12.8 8.55

    280 250 10.7 9.1 15.9 13.2

    315 300 12.11 11.6 17.91 16.7

    355 300 13.6 14.6 20.1 21.2

    400 350 15.31 18.6 22.71 26.9

    450 400 17.2 23.5 25.5 34.0

    560 500 21.4 36.2 31.7 52.5

    630 600 24.1 45.9 35.7 66.5

    1 acc. to DIN 19537

  • PE 80 SPC-burst-lining pipes for SDR 17.6 160 630 mm

    non-pressure waste water applications old pipe DN: 150 600 mm

    Inner pipe: black, light grey

    Coat pipe: brown

    PE 100 SPC-Waste water pressure pipes SDR 17 90 630 mm

    Inner pipe: black SDR 11 90 630 mm

    Coat pipe: brown

    PE 80 SPC-Waste water pipes SDR 26 160 630 mm

    Inner pipe: light grey SDR 17.6 160 630 mm

    Coat pipe: brown

    PE 100 SPC-Drinking water pressure pipes SDR 17 90 630 mm

    Inner pipe: black SDR 11 90 630 mm

    Coat pipe: blue

    05/2004 Pipes, Fittings, Valves SIMONA 19

    PEPipes

    Material Inner pipe: PE 100/PE 80

    Protective jacket: modified PP

    Dimensions DIN 8074, DIN 19537

    standard length: 12 m

    Remark terms of delivery on request,

    other lengths on request

    PE 100/PE 80 SPC-Pipes

    SDR-class d Inner pipe

  • 20 SIMONA Pipes, Fittings, Valves 05/2004

    PEPipes

    PE 80 Electrically conductive pressure pipes

    Material PE-EL (polyethylene electrically conductive)

    Colour black

    Dimensions DIN 8074,

    standard length: 5 m

    Remark terms of delivery on request

    Pressure pipe SDR 17.6 SDR 11

    d e e

    mm mm ~ kg/m mm ~ kg/m

    32 2.9 0.282

    40 3.7 0.447

    50 4.6 0.694

    63 3.6 0.717 5.8 1.100

    75 4.3 1.020 6.8 1.530

    90 5.1 1.450 8.2 2.210

    110 6.3 2.170 10.0 3.280

    125 7.1 2.780 11.4 4.250

    140 8.0 3.480 12.7 5.290

    160 9.1 4.530 14.6 6.950

    180 10.2 5.710 16.4 8.780

    200 11.4 7.070 18.2 10.800

    225 12.8 8.910 20.5 13.700

    250 14.2 11.000 22.7 16.800

    280 15.9 13.800 25.4 21.100

    315 17.9 17.400 28.6 26.700

    355 20.1 22.100 32.2 33.900

    400 22.7 28.000 36.3 43.000

    450 25.5 35.400

    500 28.4 43.800

    560 31.7 54.700

    630 35.7 69.300

  • 05/2004 Pipes, Fittings, Valves SIMONA 21

    PEPipes

    PE 80 Effluent pipes (HT)

    Material PE 80 stress relieved by thermal treatment

    acc. to DIN 19535

    Colour black

    Dimensions DIN 8074

    standard length: 6 m

    Remark terms of delivery on request,

    also suitable for underground pipelines,

    Effluent pipes acc. to DIN 19537

    d = 110 up to d = 1000 (see page 17)

    Pipe Nominal diameter SDR 33 SDR 26

    d DN e e

    mm mm ~ kg/m mm ~ kg/m

    50 40 3.0 0.453

    56 50 3.0 0.512

    63 50 3.0 0.580

    75 70 2.9 0.695

    110 100 3.4 1.170 4.2 1.430

    125 125 3.9 1.510 4.8 1.840

    160 150 4.9 2.420 6.2 3.040

    200 200 6.2 3.840 7.7 4.690

    250 250 7.7 5.920 9.6 7.300

    315 300 9.7 9.370 12.1 11.600

  • PP Pressure pipes

    Material PP-H 100 AlphaPlus

    Colour grey ~ RAL 7032

    Dimensions DIN 8077,

    standard length: 5 m

    Remark thinwalled liner pipes on request,

    terms of delivery on request

    Pressure pipe SDR 41 SDR 33 SDR 26 SDR 17.6 SDR 11 SDR 7.4

    d e e e e e e

    mm mm ~ kg/m mm ~ kg/m mm ~ kg/m mm ~ kg/m mm ~ kg/m mm ~ kg/m

    10 1.8 0.046

    12 1.8 0.057

    20 1.9 0.107

    25 1.8 0.132 2.3 0.164 3.5 0.230

    32 1.8 0.171 2.9 0.259

    40 1.8 0.217 2.3 0.273 3.7 0.411

    50 1.8 0.275 2.0 0.300 2.9 0.422 4.6 0.638 6.9 0.896

    63 1.8 0.349 2.0 0.382 2.5 0.474 3.6 0.659 5.8 1.010 8.6 1.410

    75 1.9 0.438 2.3 0.528 2.9 0.647 4.3 0.935 6.8 1.400 10.3 2.010

    90 2.2 0.613 2.8 0.758 3.5 0.936 5.1 1.330 8.2 2.030 12.3 2.870

    110 2.7 0.903 3.4 1.130 4.2 1.370 6.3 1.990 10.0 3.010 15.1 4.300

    125 3.1 1.180 3.9 1.450 4.8 1.760 7.1 2.550 11.4 3.910 17.1 5.530

    140 3.5 1.480 4.3 1.800 5.4 2.230 8.0 3.200 12.7 4.870 19.2 6.950

    160 4.0 1.910 4.9 2.320 6.2 2.920 9.1 4.170 14.6 6.390 21.9 9.040

    180 4.4 2.380 5.5 2.940 6.9 3.630 10.2 5.250 16.4 8.070 24.6 11.400

    200 4.9 2.920 6.2 3.680 7.7 4.500 11.4 6.500 18.2 9.950 27.4 14.100

    225 5.5 3.700 6.9 4.570 8.6 5.650 12.8 8.190 20.5 12.600 30.8 17.900

    250 6.2 4.630 7.7 5.670 9.6 6.990 14.2 10.100 22.7 15.500 34.2 22.100

    280 6.9 5.730 8.6 7.090 10.7 8.720 15.9 12.600 25.4 19.400 38.3 27.600

    315 7.7 7.190 9.7 8.970 12.1 11.100 17.9 16.000 28.6 24.600

    355 8.7 9.140 10.9 11.300 13.6 14.000 20.1 20.300 32.2 31.200

    400 9.8 11.600 12.3 14.400 15.3 17.800 22.7 25.700 36.3 39.600

    450 11.0 14.700 13.8 18.200 17.2 22.500 25.5 32.500 40.9 50.100

    500 12.3 18.200 15.3 22.400 19.1 27.700 28.4 40.200 45.4 62.800

    560 13.7 22.600 17.2 28.200 21.4 34.700 31.7 50.300

    630 15.4 28.600 19.3 35.600 24.1 44.000 35.7 63.700

    710 17.4 36.400 21.8 45.200 27.2 55.900 40.2 80.800

    800 19.6 46.100 24.5 57.200 30.6 70.800 45.3 102.600

    900 22.0 58.300 27.6 72.500 34.4 89.500

    1000 24.5 72.000 30.6 89.200 38.2 111.400

    DIBtapproved

    22 SIMONA Pipes, Fittings, Valves 05/2004

    PPPipes

  • 05/2004 Pipes, Fittings, Valves SIMONA 23

    PVDFPipes

    PVDF Pressure pipes

    Material PVDF

    Colour natural

    Dimensions ISO 10931,

    standard length: 5 m

    Remark terms of delivery on request,

    PVDF-CL with better resistance against

    chlorine radicals and PVDF-EL electrically

    conductive (black) available on request

    Pressure pipe SDR 33 SDR 21

    d e e

    mm mm ~ kg/m mm ~ kg/m

    16 1.9 0.164

    20 1.9 0.210

    25 1.9 0.269

    32 2.4 0.434

    40 2.4 0.554

    50 3.0 0.844

    63 2.0 0.748 3.0 1.090

    75 2.3 1.030 3.6 1.550

    90 2.8 1.480 4.3 2.220

    110 3.4 2.200 5.3 3.330

    125 3.9 2.840 6.0 4.250

    140 4.3 3.520 6.7 5.310

    160 4.9 4.540 7.7 6.960

    180 5.5 5.740

    200 6.2 7.190

    225 6.9 8.950

    250 7.7 11.100

    280 8.6 13.900

    315 9.7 17.600

    DIBtapproved

  • 24 SIMONA Pipes, Fittings, Valves 05/2004

    PVDFPipes

    PVDF Liner pipes

    Material PVDF

    Colour natural

    Dimensions acc. to ISO 10931,

    standard length: 5 m

    Remark terms of delivery on request,

    PVDF-CL with better resistance against

    chlorine radicals and PVDF-EL electrically

    conductive (black) available on request

    PVDF liner pipes 1

    d e

    mm mm ~ kg/m

    75 3.0 1.310

    90 3.0 1.580

    110 3.0 1.940

    125 3.0 2.210

    160 3.0 2.850

    200 3.0 3.580

    250 3.0 4.480

    280 3.5 5.870

    315 4.0 7.470

    355 5.0 10.500

    400 5.0 11.800

    PVDF-CV-liner pipes 2

    d e

    mm mm ~ kg/m

    32 2.4 0.434

    40 2.4 0.554

    50 3.0 0.849

    63 3.0 1.090

    75 3.0 1.310

    90 3.0 1.580

    110 3.0 1.940

    125 3.0 2.210

    160 3.0 2.850

    200 3.0 3.580

    250 3.0 4.480

    280 3.5 5.870

    315 4.0 7.470

    355 5.0 10.500

    400 5.0 11.800

    2 with pretreated surface for direct lamination

    1 without pretreated surface

  • 05/2004 Pipes, Fittings, Valves SIMONA 25

    PPsPipes

    PPs Ventilation pipes

    Material PPs polypropylene,

    flame retardant acc. to DIN 4102 B1

    Colour grey ~ RAL 7037

    Dimensions standard length: 5 m

    Remark terms of delivery on request,

    PPs-EL electrically conductive and PPs pressure pipes

    available on request

    Pipe

    d e

    mm mm ~ kg/m

    32 3.0 0.279

    40 3.0 0.356

    50 3.0 0.453

    63 3.0 0.580

    75 3.0 0.696

    90 3.0 0.841

    110 3.0 1.040

    125 3.0 1.180

    140 3.0 1.330

    160 3.0 1.520

    180 3.0 1.710

    200 3.0 1.910

    225 3.5 2.510

    250 3.5 2.790

    280 4.0 3.540

    315 5.0 4.940

    355 5.0 5.580

    400 6.0 7.520

    450 7.0 9.840

    500 8.0 12.500

    560 8.0 14.000

    630 10.0 19.600

  • 26 SIMONA Pipes, Fittings, Valves 05/2004

    PVC-UPipes

    PVC-U Pressure pipes

    Material PVC-U

    Colour dark grey ~ RAL 7011

    Dimensions DIN 8061,

    standard length: 5 m

    Remark terms of delivery on request

    Pressure pipe SDR 51 SDR 34.3 SDR 21 SDR 13.5 SDR 9

    d e e e e e

    mm mm ~ kg/m mm ~ kg/m mm ~ kg/m mm ~ kg/m mm ~ kg/m

    10 1.2 0.054

    12 1.0 0.055 1.4 0.073

    16 1.2 0.090 1.8 0.124

    20 1.5 0.138 2.3 0.197

    25 1.5 0.175 1.9 0.213 2.8 0.296

    32 1.8 0.265 2.4 0.344 3.6 0.485

    40 1.9 0.353 3.0 0.529 4.5 0.756

    50 1.8 0.426 2.4 0.556 3.7 0.815 5.6 1.170

    63 1.9 0.567 3.0 0.860 4.7 1.300 7.0 1.830

    75 1.8 0.647 2.2 0.787 3.6 1.230 5.6 1.830 8.4 2.620

    90 1.8 0.780 2.7 1.140 4.3 1.760 6.7 2.620 10.0 3.730

    110 2.2 1.170 3.2 1.650 5.3 2.630 8.2 3.920 12.3 5.610

    125 2.5 1.490 3.7 2.150 6.0 3.360 9.3 5.050

    140 2.8 1.850 4.1 2.670 6.7 4.210 10.4 6.310

    160 3.2 2.430 4.7 3.470 7.7 5.520 11.9 8.230

    180 3.6 3.040 5.3 4.400 8.6 6.930 13.4 10.400

    200 4.0 3.730 5.9 5.410 9.6 8.580

  • 05/2004 Pipes, Fittings, Valves SIMONA 27

    PVC-GLASPipes

    PVC-GLAS Pressure pipes

    Material PVC-U

    Colour transparent

    Dimensions DIN 8061,

    standard lengh: 5 m

    Packing in order to protect them against soiling

    SIMONAPVC-GLAS pipes are packed in polyethylene foil

    Remark Wall thicknesses printed in bold types can also be delivered

    in the physiologically acceptable type PVC-GLAS-LZ.

    PVC-GLAS-SX with higher impact resistance available

    on request.

    The permissible working pressure is only valid for temperature

    up to 20C.

    Pressure Pipe PU1 SDR 51 SDR 34.3 SDR 21 SDR 13.5 SDR 9

    d e e e e e

    mm mm ~ kg/m mm ~ kg/m mm ~ kg/m mm ~ kg/m mm ~ kg/m

    6 10 1.0 0.025

    8 10 1.0 0.034

    10 10 1.2 0.052

    12 10 1.0 0.053 1.4 0.071

    16 10 1.2 0.088

    20 5 1.5 0.134

    25 5 1.5 0.170 1.9 0.207

    32 4 1.8 0.258 2.4 0.334

    40 4 2.0 0.358 3.0 0.514

    50 4 1.8 0.414 2.4 0.540 3.7 0.792

    63 3 1.8 0.525 3.0 0.836 4.7 1.260

    75 3 1.8 0.629 3.6 1.190

    90 2 1.8 0.758 4.3 1.710

    110 2 2.2 1.130 5.3 2.560

    125 1 2.5 1.450

    140 1 2.8 1.800

    160 1 3.2 2.360 4.7 3.370

    1 PU = packing unit

  • 28 SIMONA Pipes, Fittings, Valves 05/2004

    E-CTFEPipes

    E-CTFE Pressure pipes

    Material E-CTFE

    Colour natural

    Dimensions acc. to ISO 10931

    standard length: 5 m

    Remark terms of delivery on request

    Pressure pipe SDR 21

    d e

    mm mm ~ kg/m

    16 1.9 0.155

    20 1.9 0.199

    25 1.9 0.255

    32 2.4 0.412

    40 2.4 0.526

    50 3.0 0.806

    63 3.0 1.030

    75 3.6 1.470

    90 4.3 2.210

    110 5.3 3.160

    125 6.0 4.030

    140 6.7 5.040

    160 7.7 6.610

  • Fittings

  • Bends 90 SDR 171 63 315 mm PE 100

    injected SDR 11 63 315 mm PE 100

    PE 100/PE 80 Fittings with elongated spigots for butt weldingand electro fusion welding

    Tees SDR 171 50 500 mm PE 100

    injected SDR 11 20 500 mm PE 100

    Tees with reduced branch SDR 171 63/50 315/250 mm PE 100

    injected SDR 11 63/50 315/250 mm PE 100

    Stub flanges SDR 171 50 400 mm PE 100

    for loose flanges ISO/DIN SDR 11 20 400 mm PE 100

    injected

    Tees SDR 33 90 1000 mm PE 100

    segment welded SDR 171 90 800 mm PE 100

    (pressure reduction SDR 11 90 630 mm PE 100

    factor 0,65)

    Bends 90, 60, 45, 30 SDR 33 90 1000 mm PE 80 PE 100

    segment welded, r ~ 1,5 d SDR 17 90 1000 mm PE 100

    (pressure reduction factor SDR 17,6 90 1000 mm PE 80

    0,8 for PE 100 and PE 80 SDR 11 90 630 mm PE 80 PE 100

    with S =1,25)

    Elbows 90 SDR 171 50 315 mm PE 100

    injected SDR 11 20 315 mm PE 100

    SDR-class d Material

    Branches 45 SDR 33 110 mm PE 100

    injected SDR 171 63 110 mm PE 100

    SDR 11 63 110 mm PE 100

    30 SIMONA Pipes, Fittings, Valves 05/2004

    PEFittings

    Bends 90, 60, 45, 30, SDR 171 50 630 mm PE 100

    22, 11 SDR 11 32 630 mm PE 100

    seamless formed, r ~ 1,5 d

    other dimensions and radius

    on request

    Elbows 45 SDR 171 50 315 mm PE 100

    injected SDR 11 20 315 mm PE 100

  • 05/2004 Pipes, Fittings, Valves SIMONA 31

    PEFittings

    1 execution in SDR 17, also applicable for SDR 17,6

    End caps SDR 171 50 400 mm PE 100

    injected SDR 17,6 50 400 mm PE 80

    SDR 11 20 400 mm PE 80 PE 100

    Reducers concentric SDR 171 50/25 400/355 mm PE 100

    injected SDR 11 25/20 400/355 mm PE 100

    SDR-class d Material

    Unions SDR 11 20 63 mm PE 100

    injected with EPDM or FPM

    gasket

    Adaptors with threaded SDR 11 20 63 mm PE 100

    female end Rp

    injected

    Adaptors with threaded SDR 11 20 63 mm PE 100

    male end R

    injected

  • 32 SIMONA Pipes, Fittings, Valves 05/2004

    PEFittings

    PE 100/PE 80 Fittings with short spigots for butt welding

    Tees with reduced branch SDR 17 90/50 630/450 mm PE 100

    saddle mounted, swept SDR 17,6 90/50 630/450 mm PE 80

    (pressure reduction factor 0,75) SDR 11 90/50 560/400 mm PE 80 PE 100

    Tees with reduced branch SDR 17 1/2" 2"/50 800 mm PE 100

    with internal thread SDR 17,6 1/2" 2"/50 800 mm PE 80

    saddle mounted

    (pressure reduction factor 0,75)

    Tees with reduced branch SDR 171 90/32 250/160 mm PE 100

    injected SDR 11 90/32 250/160 mm PE 100

    Tees SDR 33 110 400 mm PE 100

    injected SDR 171 50 500 mm PE 100

    SDR 11 20 500 mm PE 100

    Bends 90 SDR 33 110 400 mm PE 100

    injected, r=d SDR 17,6 50 400 mm PE 100

    SDR 11 20 400 mm PE 100

    SDR-class d Material

    Stub flanges SDR 33 710 1000 mm PE 100

    for loose flanges ISO/DIN SDR 171 710 1000 mm PE 100

    machined SDR 11 560 630 mm PE 100

    Stub flanges SDR 33 110 630 mm PE 100

    for loose flanges ISO/DIN SDR 171 50 630 mm PE 100

    injected SDR 11 20 500 mm PE 100

    Stub flanges SDR 11 20 90 mm PE 100

    for loose flanges ANSI

    injected

  • 05/2004 Pipes, Fittings, Valves SIMONA 33

    PEFittings

    Fixing points for pipe clamps SDR 17 50 500 mm PE 100

    SDR 17,6 50 630 mm PE 80

    SDR 11 50 6302 mm PE 80 PE 100

    Branches 60, 45 SDR 33 110 630 mm PE 80 PE 100

    segment welded SDR 17 110 630 mm PE 100

    (pressure reduction factor 0,50) SDR 17,6 110 630 mm PE 80

    SDR 11 110 630 mm PE 80 PE 100

    1 execution in SDR 17, also applicable for SDR 17,62 in PE 100 only up to 500 mm

    Thread sockets SDR 11 1/2" 2 1/2" PE 80

    injected

    (see also adaptors on page 31)

    Thread plugs 1/2" 2 1/2" PE 80

    injected

    Reducers concentric SDR 171 355/225 800/710 mm PE 100

    machined SDR 11 355/225 630/560 mm PE 100

    Reducers concentric SDR 171 63/50 315/280 mm PE 100

    injected SDR 11 25/20 315/280 mm PE 100

    End caps SDR 33 75 800 mm PE 80

    machined SDR 17 250 800 mm PE 100

    SDR 17,6 250 800 mm PE 80

    SDR 11 250 630 mm PE 80 PE 100

    SDR-class d Material

    Reducers eccentric SDR 33 160/90 1000/900 mm PE 100

    injected SDR 171 160/90 1000/900 mm PE 100

    machined SDR 11 160/90 630/560 mm PE 100

  • 34 SIMONA Pipes, Fittings, Valves 05/2004

    PEFittings

    PE 100/PE 80 Special fittings

    Compensators SDR 11 63 400 mm PP-H 100 AlphaPlus

    Inspection tees 90 SDR 33 110 630 mm PE 80 PE 1001

    segment welded SDR 17 110 630 mm PE 1001

    (pressure reduction SDR 17,6 110 630 mm PE 80

    factor 0,65) SDR 11 110 250 mm PE 80 PE 1001

    Inspection tees 60 SDR 33 110 400 mm PE 80 PE 1001

    segment welded SDR 17 110 400 mm PE 1001

    (pressure reduction SDR 17,6 110 400 mm PE 80

    factor 0,50) SDR 11 110 400 mm PE 80 PE 1001

    Expansion sockets SDR 33 50 400 mm PE 80 PE 1001

    (also with 100 mm elongated SDR 17 50 400 mm PE 1001

    welding socket) SDR 17,6 50 400 mm PE 80

    SDR 11 50 400 mm PE 80 PE 1001

    SDR-class d Materials

    1 PE 100 Specials fittings on request

    We can manufacture special

    problem solving solutions effec-

    tive for your application, i.e.:

    shafts

    wall passages

    tank connectors

    collecting drains

    floor drainage channels

    coned flanges

    double sockets

    pipe collar wall seals

    If our standard programme does

    not cover your application, please

    dont hesitate to ask us for a

    solution. Our sales consultants,

    our team of experts within the

    Applications Technology Depart-

    ment and our specialist staff at

    the SIMONA plastics workshop

    look forward to developing effec-

    tive solutions tailored to your

    requirements.

  • Tapping saddle 40/20 250/63 mm PE 100

    05/2004 Pipes, Fittings, Valves SIMONA 35

    PEFittings

    PE 100 Fittings for electro fusion welding

    Electro fusion sockets-pressure 20 710 mm PE 100

    for piping systems SDR 17

    up to SDR 11

    Electro fusion sockets-channel 110 500 mm PE 100

    for piping systems SDR 33

    up to SDR 17

    SDR-class d Materials

    Welding machines

    HST 300 Print+3 Light weight 1-hand-held equipment with dataprinting, manual input, barcode input

    HST 300 Print2 Light weight 1-hand-held equipment with dataprinting, barcode input

    Junior HST 300+2 Welding machine with barcode input, manual input

    Junior HST 3002 Welding machine with barcode input

    Accessories

    Restraining clamp for pipes d 25 63 mm, d 63 180 mm, d 63 355 mm

    Rotation pipe scrapers 32 110 mm2, 110 500 mm3

    Hand pipe scrapers

    Loading clamp for tapping tees

    Special key for tapping tees

    Testing mount for tapping tees

    Welding machines and accessories for electro fusion welding

    2 The welding machine can be purchased from SIMONA.3 The welding machine can be purchased or hired from SIMONA.

    in PE 100 on request: tees with integrated heating coils elbows 90/45 with integrated heating coils reducers concentric with integrated heating coils end caps with integrated heating coils

  • 36 SIMONA Pipes, Fittings, Valves 05/2004

    PPFittings

    PP Fittings with elongated spigots for IR- and butt welding

    Tees with reduced branch SDR 17,6 63/50 315/250 mm PP-H 100 AlphaPlus

    injected SDR 11 63/50 315/250 mm PP-H 100 AlphaPlus

    Elbows 90 SDR 11 20 315 mm PP-H 100 AlphaPlus

    injected

    Elbows 45 SDR 17,6 50 315 mm PP-H 100 AlphaPlus

    injected SDR 11 20 315 mm PP-H 100 AlphaPlus

    Bends 90 SDR 17,6 63 315 mm PP-H 100 AlphaPlus

    injected SDR 11 63 315 mm PP-H 100 AlphaPlus

    Tees SDR 11 20 500 mm PP-H 100 AlphaPlus

    injected

    Bends 90, 60, 45, 30 SDR 11 32 315 mm PP-H 100 AlphaPlus

    seamless formed, r ~ 1,5 d

    other dimensions and radius

    on request

    Stub flanges SDR 11 20 315 mm PP-H 100 AlphaPlus

    for loose flanges ISO/DIN

    injected

    SDR-class d Material

    Bends 90, 60, 45, 30 SDR 17,6 90 800 mm PP-H 100 AlphaPlus

    segment welded, SDR 11 90 500 mm PP-H 100 AlphaPlus

    r ~ 1,5 d

    Tees SDR 33 90 1000 mm PP-H 100 AlphaPlus

    segment welded SDR 17,6 90 800 mm PP-H 100 AlphaPlus

    (pressure reduction SDR 11 90 500 mm PP-H 100 AlphaPlus

    factor 0,65)

    Stub flanges SDR 11 20 90 mm PP-H 100 AlphaPlus

    for loose flanges ANSI

    injected

    Stub flanges SDR 11 20 225 mm PP-H 100 AlphaPlus

    for loose flanges JIS

    injected

  • 05/2004 Pipes, Fittings, Valves SIMONA 37

    PPFittings

    End caps SDR 17,6 50 400 mm PP-H 100 AlphaPlus

    injected SDR 11 20 400 mm PP-H 100 AlphaPlus

    Unions SDR 11 20 63 mm PP-H 100 AlphaPlus

    with EPDM and FPM gasket

    injected

    Adaptors with threaded SDR 11 20 63 mm PP-H 100 AlphaPlus

    female end Rp and NPT

    injected

    Adaptors with threaded SDR 11 20 63 mm PP-H 100 AlphaPlus

    male end R and NPT

    injected

    SDR-class d Material

    Electro fusion sockets 20 225 mm PP-H 100 AlphaPlusfor piping systems

    SDR 17,6 up to SDR 11

    PP Fittings for electro fusion welding

    SDR-class d Material

    Reducers eccentric SDR 11 25/20 250/225 mm PP-R 80

    injected

    Branches 45 SDR 33 110 mm PP-H 100 AlphaPlus

    injected SDR 17,6 63 110 mm PP-H 100 AlphaPlus

    SDR 11 63 110 mm PP-H 100 AlphaPlus

    Reducers concentric SDR 11 25/20 315/280 mm PP-H 100 AlphaPlus

    injected

    Remark: For production reasons, some sizes are also manufactured in PP-R 80.

  • 38 SIMONA Pipes, Fittings, Valves 05/2004

    PPFittings

    Stub flanges SDR 33 110 630 mm PP-H 100 AlphaPlus

    for loose flanges ISO/DIN SDR 17,6 50 630 mm PP-H 100 AlphaPlus

    injected SDR 11 20 500 mm PP-H 100 AlphaPlus

    PP Fittings with short spigotsfor butt welding

    Tees with reduced branch SDR 17,6 90/32 250/160 mm PP-R 80

    injected SDR 11 90/32 250/160 mm PP-R 80

    Tees with reduced branch SDR 17,6 90/50 630/450 mm PP-H 100 AlphaPlus

    saddle mounted, swept SDR 11 90/50 500/355 mm PP-H 100 AlphaPlus

    (pressure reduction factor 0,75)

    Bends 90 SDR 33 110 400 mm PP-H 100 AlphaPlus

    injected, r = d SDR 17,6 50 400 mm PP-H 100 AlphaPlus

    SDR 11 20 400 mm PP-H 100 AlphaPlus

    Tees SDR 33 110 500 mm PP-H 100 AlphaPlus

    injected SDR 17,6 50 500 mm PP-H 100 AlphaPlus

    SDR 11 20 500 mm PP-H 100 AlphaPlus

    SDR-class d Material

    Stub flanges SDR 17,6 50 90 mm PP-H 100 AlphaPlus

    for loose flanges ANSI SDR 11 20 90 mm PP-H 100 AlphaPlus

    injected

    Stub flanges SDR 17,6 50 225 mm PP-H 100 AlphaPlus

    for loose flanges JIS SDR 11 20 225 mm PP-H 100 AlphaPlus

    injected

    Stub flanges SDR 33 710 1000 mm PP-H 100 AlphaPlus

    for loose flanges ISO/DIN SDR 17,6 710 1000 mm PP-H 100 AlphaPlus

    machined SDR 11 560 630 mm PP-H 100 AlphaPlus

  • 05/2004 Pipes, Fittings, Valves SIMONA 39

    PPFittings

    Fixing points for SDR 17,6 50 500 mm PP-H 100 AlphaPlus

    pipe clamps SDR 11 50 500 mm PP-H 100 AlphaPlus

    Branches 60, 45 SDR 17,6 110 630 mm PP-H 100 AlphaPlus

    segment welded SDR 11 110 500 mm PP-H 100 AlphaPlus

    (pressure reduction

    factor 0,50)

    Remark: For production reasons, some sizes are also manufactured in PP-R 80.

    Reducers concentric SDR 17,6 355/225 800/710 mm PP-H 100 AlphaPlus

    machined SDR 11 355/225 630/560 mm PP-H 100 AlphaPlus

    Reducers concentric SDR 17,6 63/50 315/280 mm PP-H 100 AlphaPlus

    injected SDR 11 25/20 315/280 mm PP-H 100 AlphaPlus

    SDR-class d Material

    Thread sockets SDR 11 1/2" 2 1/2" PP-R 80

    injected

    (see also adaptors on page 37)

    Thread plugs 1/2" 2 1/2" PP-R 80

    injected

    End caps SDR 17,6 250 800 mm PP-H 100 AlphaPlus

    machined SDR 11 250 500 mm PP-H 100 AlphaPlus

    Tees with reduced branch SDR 17,6 1/2" 2"/50 800 mm PP-H 100 AlphaPlus

    with internal thread

    saddle mounted

    (pressure reduction factor 0,75)

  • 40 SIMONA Pipes, Fittings, Valves 05/2004

    PPFittings

    PP Special fittings

    Expansion sockets SDR 17,6 50 400 mm PP-H 100 AlphaPlus

    (also with 100 mm elongated SDR 11 50 400 mm PP-H 100 AlphaPlus

    welding socket)

    Compensators SDR 11 63 400 mm PP-H 100 AlphaPlus

    Inspection tees 60 SDR 17,6 110 400 mm PP-H 100 AlphaPlus

    segment welded SDR 11 110 400 mm PP-H 100 AlphaPlus

    (pressure reduction

    factor 0,50)

    Inspection tees 90 SDR 17,6 110 630 mm PP-H 100 AlphaPlus

    segment welded SDR 11 110 250 mm PP-H 100 AlphaPlus

    (pressure reduction

    factor 0,65)

    Remark: For production reasons, some sizes are also manufactured in PP-R 80.

    SDR-class d Material

    We can manufacture special

    problem solving solutions effec-

    tive for your application, i.e.:

    shafts

    wall passages

    tank connectors

    collecting drains

    floor drainage channels

    coned flanges

    double sockets

    pipe collar wall seals

    If our standard programme does

    not cover your application, please

    dont hesitate to ask us for a

    solution. Our sales consultants,

    our team of experts within the

    Applications Technology

    Department and our specialist

    staff at the SIMONA plastics

    workshop look forward to devel-

    oping effective solutions tailored

    to your requirements.

  • 05/2004 Pipes, Fittings, Valves SIMONA 41

    PE/PPFittings

    PE 80/PP Fittings for socket welding

    Remark: For production reasons, some sizes are also manufactured in PP-R 80.

    1 PE 100 on request

    Elbows 90, 45 PN 12,5 20 63 mm PE 801

    injected PN 12,5 16 110 mm PP-H 100 AlphaPlus

    Tees PN 12,5 20 63 mm PE 801

    injected PN 12,5 16 110 mm PP-H 100 AlphaPlus

    Stub flanges for socket welding PN 12,5 20 63 mm PE 801

    for loose flanges ISO/DIN PN 12,5 16 110 mm PP-R 80

    injected

    Reducers PN 12,5 25/20 63/50 mm PE 801

    injected PN 12,5 20/16 110/90 mm PP-H 100 AlphaPlus

    Sockets PN 12,5 20 63 mm PE 801

    injected PN 12,5 16 110 mm PP-H 100 AlphaPlus

    End caps PN 12,5 20 63 mm PE 801

    injected PN 12,5 16 110 mm PP-H 100 AlphaPlus

    Unions with cylindric PN 12,5 20 63 mm PP-H 100 AlphaPlus

    threaded end R

    injected with EPDM gasket

    Adaptors with threaded PN 12,5 20 63 mm PP-R 80

    female end Rp

    injected

    (pressure reduction factor 0,8)

    Adaptors with threaded PN 12,5 20 63 mm PP-R 80

    male end R

    injected

    (pressure reduction factor 0,6)

    SDR-class d Material

    Stub flanges for socket welding PN 12,5 20 110 mm PP-R 80

    for loose flanges ANSI

    injected

    Stub flanges for socket welding PN 12,5 20 110 mm PP-H 100 AlphaPlus

    for loose flanges JIS

    injected

  • 42 SIMONA Pipes, Fittings, Valves 05/2004

    Flanges

    Fittings for flange assemblies PE 80/PE 100/PP Piping systems

    Gaskets

    Flat gaskets SDR 17 50 1000 mm EPDM

    for stub flanges SDR 11 20 630 mm EPDM

    Flanges

    PP/Steel Loose flanges drilled acc. to ISO/DIN PN 10/16 20 180 mm PP/Steel

    for stub flanges drilled acc. to ISO/DIN PN 10 200 500 mm PP/Steel

    drilled acc. to ANSI 150 lbs 1/2" 16" PP/Steel

    drilled acc. to JIS 1/2" 10" PP/Steel

    drilled acc. to ISO/DIN PN 10/16 32 500 mm PP-EL/Steel

    PP/Steel Loose flanges drilled acc. to ISO/DIN PN 10/16 90 110 mm PP/Steel

    for stub flanges for socket welding drilled acc. to ANSI 150 lbs 90 110 mm PP/Steel

    drilled acc. to JIS 90 110 mm PP/Steel

    Blind flanges drilled acc. to ISO/DIN PN 10/16 20 180 mm PP/Steel

    drilled acc. to ISO/DIN PN 10 200 400 mm PP/Steel

    AL Loose flanges drilled acc. to ISO/DIN PN 10/16 20 180 mm Aluminium coated

    AL Blind flanges drilled acc. to ISO/DIN PN 10 200 800 mm Aluminium coated

    SDR-class d Material

    Special flange connections SDR 17 160 560 mm PE 100

    with EPDM O-ring and galvinized SDR 11 160 560 mm PE 100

    steel flange

    Accessoires

    Pipe clamps

    injected, without clip 16 32 mm PP

    injected, with clip 40 160 mm PP

    Profile gaskets for stub flanges SDR 33 110 315 mm EPDM

    with steel insert, up to PN 16 for stub flanges SDR 17 50 630 mm EPDM/FPM/NBR

    for stub flanges SDR 11 25 630 mm EPDM/FPM/NBR

    for stub flanges for socket welding PN 16 16 110 mm EPDM/FPM

    PP Filling blocks

    for pipe clamps Type A/Type B 16 160 mm PP

    PP/Steel Profiled loose flanges drilled acc. to ISO/DIN PN 10/16 50 180 mm PP/Steel

    drilled acc. to ISO/DIN PN 16 200 400 mm PP/Steel

    drilled acc. to ISO/DIN PN 10 20 630 mm PP/Steel

    GRP Loose flanges drilled acc. to ISO/DIN PN 10/16 63 180 mm GRP

    for stub flanges drilled acc. to ISO/DIN PN 10 200 630 mm GRP

    for stub flanges for socket welding drilled acc. to ISO/DIN PN 10/16 20 110 mm GRP

  • 05/2004 Pipes, Fittings, Valves SIMONA 43

    Flanges

    PP/Steel Loose flanges drilled acc. to ISO/DIN 90 110 mm PP/Steel

    for stub flanges for drilled acc. to ANSI 90 110 mm PP/Steel

    socket welding drilled acc. to JIS 90 110 mm PP/Steel

    SDR-class d Material

    GRP Loose flanges drilled acc. to ISO/DIN PN 10/16 63 180 mm GFK

    for stub flanges drilled acc. to ISO/DIN PN 10 200 225 mm GFK

    for stub flanges for drilled acc. to ISO/DIN PN 10/16 20 110 mm GFK

    socket welding

    Gaskets

    Flat gaskets for stub flanges for socket welding PN 16 20 110 mm FPM

    FPM up to 10 bar

    Profile gaskets for stub flanges SDR 33 90 315 mm FPM

    with steel insert for stub flanges SDR 21 25 225 mm FPM

    FPM up to PN 16 for stub flanges for socket welding PN 16 16 110 mm FPM

    Fittings for flange assembliesPVDF Piping systems

    Flanges

    PP/Steel Loose flanges drilled acc. to ISO/DIN PN 10/16 20 180 mm PP/Steel

    for stub flanges drilled acc. to ISO/DIN PN 10 200 225 mm PP/Steel

    drilled acc. to ANSI 150 lbs 1/2" 8" PP/Steel

    drilled acc. to JIS 20 200 mm PP/Steel

  • 44 SIMONA Pipes, Fittings, Valves 05/2004

    PVDFFittings

    PVDF Fittings with elongated spigots for IR- and butt welding

    Tees with reduced branch SDR 33 160/90 225/110 mm PVDF

    injected

    Elbows 45 SDR 33 90 225 mm PVDF

    injected SDR 21 20 160 mm PVDF

    Bends 90 SDR 33 90 225 mm PVDF

    injected, r = d SDR 21 90 225 mm PVDF

    Bends 90 SDR 21 20 75 mm PVDF

    injected

    with short spigots

    for butt welding

    Elbows 90 SDR 21 20 75 mm PVDF

    injected

    Tees SDR 33 90 225 mm PVDF

    injected SDR 21 20 160 mm PVDF

    Stub flanges SDR 33 90 225 mm PVDF

    for loose flanges ISO/DIN SDR 21 20 225 mm PVDF

    injected

    Reducers concentric SDR 33 110/90 225/200 mm PVDF

    injected SDR 21 25/20 160/140 mm PVDF

    SDR-classe d Material

    Stub flanges SDR 33 90 mm PVDF

    for loose flanges ANSI SDR 21 20 90 mm PVDF

    injected

    Stub flanges SDR 33 90 225 mm PVDF

    for loose flanges JIS SDR 21 20 225 mm PVDF

    injected

  • 05/2004 Pipes, Fittings, Valves SIMONA 45

    PVDFFittingsReducers eccentric SDR 21 25/20 63/50 mm PVDF

    injected

    Unions SDR 21 20 63 mm PVDF

    injected

    with FPM gasket

    Adaptor with threaded SDR 21 20 63 mm PVDF

    female end Rp and NPT

    injected

    Adaptor with threaded SDR 21 20 63 mm PVDF

    male end R and NPT

    injected

    SDR-class d Material

  • 46 SIMONA Pipes, Fittings, Valves 05/2004

    PVDF

    PVDF Fittings for socket welding

    Sockets PN 16 16 110 mm PVDF

    injected

    Tees PN 16 16 110 mm PVDF

    injected

    Stub flanges for socket welding PN 16 16 110 mm PVDF

    for loose flanges ISO/DIN

    injected

    Unions PN 16 16 63 mm PVDF

    injected

    with FPM gasket

    Elbows 90, 45 PN 16 16 110 mm PVDF

    injected

    Reducers PN 16 20/16 110/90 mm PVDF

    injected

    End caps PN 16 16 110 mm PVDF

    injected

    SDR-class d Material

    Stub flanges for socket welding PN 16 20 110 mm PVDF

    for loose flanges ANSI

    injected

    Stub flanges for socket welding PN 16 16 110 mm PVDF

    for loose flanges JIS

    injected

    Fittings

  • 05/2004 Pipes, Fittings, Valves SIMONA 47

    PPsFittings

    PPs Fittings for ventilation pipes

    Bends 90, 60, 45, 30 Ventilation series 50 400 mm PPs1

    Tees Ventilation series 50 400 mm PPs1

    Butterfly valves

    adjustment in increments Ventilation series 50 315 mm PPs1

    infinitesimal adjustment Ventilation series 50 400 mm PPs1

    Flange adaptors Ventilation series 50 400 mm PPs1

    Sockets Ventilation series 50 400 mm PPs1

    Reducers concentric Ventilation series 90/75 400/355 mm PPs1

    End caps Ventilation series 50 400 mm PPs1

    1 Fittings for ventilation pipes in PVC, PE or PP on request.

    SDR-class d Material

  • 48 SIMONA Pipes, Fittings, Valves 05/2004

    Double containment

    pipes

    Double containment piping systems

    Systems for soak-away pipes and land-fill sites

    Areas of use For industrial installations:

    PE/PE, PP/PP, PE/PP, PVDF on request

    For waste water:

    based on PE 80 CoEx Sewer pipes,

    PP-H 100 AlphaPlus Sewer pipes and

    PE 80/PE 100 Pressure pipes

    perforated and slotted PE 80 pipes d 90 630 mm

    connection parts for soak-away pipes,

    shafts and accessories,

    components for asphalt sealed land-fill sites,

    components for degassification pipelines,

    gas wells, gas chimneys, gas collecting manifolds,

    condensate separators, condensate shafts

    Remark: For detailed information please ask for our special catalogues.

    Pipes and components are also available in electrically conductive version (PE-EL).

  • Valves

  • 50 SIMONA Pipes, Fittings, Valves 05/2004

    PPValves

    PP Valves manually operated

    2-way ball valve 20 110 mm PTFE/EPDM IM, DM, FM, MM, EM, OM ISO

    20 110 mm PTFE/FPM IM, DM, FM, MM, EM, OM ISO

    3-way ball valve 20 63 mm PTFE/EPDM IM, DM, FM, MM, EM

    with L - or T-bore 20 63 mm PTFE/FPM IM, DM, FM, MM, EM

    d Gasket/diaphragm Connections

    Butterfly valve with 50 225 mm EPDM, FPM for flange connection

    locking lever ISO/DIN, ANSI

    Butterfly valve with 75 315 mm EPDM, FPM for flange connection

    manual gear box and ISO/DIN, ANSI

    hand lever

    Ball check valve 20 63 mm FPM with welding connections

    for socket fusion

    Check valve 20 90 mm FPM with female fusion ends

    for socket fusion

    Sediment strainer 20 110 mm FPM with female fusion ends

    for socket fusion

    Diaphragm valve 20 110 mm EPDM, FPM DM, VSS, VSM, OM ISO

    20 110 mm PTFE/EPDM DM, VSS, VSM, OM ISO

  • 05/2004 Pipes, Fittings, Valves SIMONA 51

    PVDFValves2-way ball valve 16 90 mm FPM IM, DM, EF, OM ISO

    Diaphragm valve 20 110 mm FPM DM

    20 110 mm PTFE/EPDM

    d Gasket/diaphragm Connections

    Butterfly valve with 50 225 mm FPM for flange connection

    locking lever ISO/DIN, ANSI

    Butterfly valve with 75 315 mm FPM for flange connection

    manual gear box and ISO/DIN, ANSI

    hand lever

    Ball check valve 20 63 mm FPM with welding connections

    for socket fusion

    PVDF Valves manually operated

    3-way ball valve 20 63 mm PTFE/FPM IM

    with L - or T-bore

    Connections

    IM = female fusion ends ISO/DIN

    DM = male socket fusion ends ISO/DIN

    FM = thread sockets with cyl. threaded female

    ends R

    MM = PP butt fusion ends SDR 11 elongated

    EM = PE 80 butt fusion ends SDR 11 elongated

    OM ISO = PP/Steel Loose flanges drilled acc. to

    ISO/DIN 2501

    VSS = union ends with male butt

    fusion end insert

    VSM = union ends with female fusion

    end insert

    EF = with male IR-/butt fusion ends

    SDR 21

    Key

  • 52 SIMONA Pipes, Fittings, Valves 05/2004

    Valves

    Butterfly valves

    Pressure 10 bar max. for SDR 11,

    6 bar max. for SDR 17/17,6

    Nominal DN 50 DN 600

    diameter

    Connection PN 10 acc. to ISO/DIN 2501

    Remark Valve geometry is specially adapted to pipes

    made of PE and PP. There are no stub

    flanges that have to be machined.

    Butterfly valve type Z411 SDR 17/17,6 63 630 mm aluminium, GGG 40

    interposed flange valve SDR 11 63 630 mm aluminium, GGG 40

    Accessoires for valves

    SDR-class d Body

    Butterfly valve type Z414 SDR 17/17,6 63 630 mm GGG 40

    flange mounting valve SDR 11 63 630 mm GGG 40

    Type Z411 Type Z414

    We supply a full range of acces-

    sories for the various valves and

    types of connection.

    For further details about our

    range of valves, please refer to

    our Gross Price List.

    For ball valves

    Ball valve brackets

    Inserts for connections

    PP/PVDF

    For diaphragm valves

    Mounting plates

    Electrical position indicator

    Locking device

  • 05/2004 Pipes, Fittings, Valves SIMONA 53

    We are at your service

    Catalogues Pipes and Fittings Gross price list

    Pipes, Fittings, Valves Deposit site composite Technical manual Chemical Resistance

    Electronic catalogues SIMCAT (Pipes and Fittings) SIMCHEM (Chemical Resistance)

    Brochures

    Company Profile Waste Water Pipes Pipes for

    Sewer Renovation Semi-Finished Plastics for Tank

    and Apparatus Construction New Fittings PE 80 Ovoid Ducts Sheets, Rods, Profiles, Welding

    Rods Sheets for Display Advertising Sheets and Solid Rods Made of

    High-Molecular Weight PE Product Range PVDF Pipe Systems Pipes,

    Fittings and Valves Pipes, Fittings, Valves SIMONAPP AlphaPlus The New

    Generation of Polypropylene SIMONAPVC-C CORZAN 4910

    SPC Pipes

    Project reports

    No. 9 Land fill site Mertesdorf

    Gas collectors

    No. 10 Drinking water piping system

    No. 11 Renovation of a sewage

    piping system

    No. 12 Renovation of Ovoid Ducts

    with SIMONA PE 80 Ovoid Pipes

    No. 13 Renovation of a Drinking

    water Pipe system using SIMONA

    SPC Pipes No. 14 Transfer of Combined

    Wastewater using SIMONA

    SPC Pipes No. 15 SIMONASystem Solutions

    for Equipping Gravel Factories

    Product information

    SIMONAPE-HWU/HWST SIMONAPE-HML/HMG SIMONAPP-DWU/DWST SIMONAPPs SIMONAPVC-CAW/MZ SIMONAPVC-D/DS

    SIMONAPVC-TF SIMONAPVC-T SIMONAPVC-GLAS SIMONASIMOPOR/SIMOPOR-LIGHT

    SIMONASIMOCEL/COPLAST SIMONASIMOLUX SIMONAPVDF SIMONAE-CTFE Electrically Conductive Products SIMONAPE 80/PE 100 Pressure

    Pipe Systems for Local Authority

    Sewage

    SIMONAPE CoEx Sewer Duct

    Systems for Local Authority Sewage

    SIMONAPP-H 100 Sewer Duct

    Systems for Industrial Sewage

    Processing instructions

    Bending Welding Machining Composite construction Vacuum forming/Thermo forming

    You will find further information to our products and services in the

    following publications:

    The publications marked with are available in English.

    Since the foundation of SIMONA

    AG we are intensively occupied

    with the use of our products and

    the advice of our customers con-

    cerning selection and processing

    of materials. The comprehensive

    advice service by our employees

    of the Technical Application and

    Sales Department can be used

    worldwide.

    The advice starts with the project

    planning at your place and stret-

    ches to the technical application

    advice concerning the project work

    on the spot. Our services include

    training of your employees at your

    place or in our technical depart-

    ment in Kirn, where SIMONA is

    located.

    Our service includes advice

    concerning:

    Chemical resistance

    Tank construction

    Composite constructions

    and linings

    Sewer and waste disposal

    sites construction

    Ventilation pipes

  • 54 SIMONA Pipes, Fittings, Valves 05/2004

    SIMONA worldwide

    SIMONA S.A. ParisZ.I. 1, rue du Plant LogerF -95335 Domont CedexPhone +33 (0) 1 39 35 4949Fax +33 (0) 1 39 [email protected]

    SIMONA S.A. LyonZ.I. du Chanay2, rue Marius BerlietF -69720 Saint-Bonnet-de-MurePhone +33 (0) 4 78 40 70 71Fax +33 (0) 4 78 40 83 [email protected]

    SIMONA S.A. AngersZ.I. 20, Bld. de lIndustrieF -49000 EcouflantPhone +33 (0) 2 41370737Fax +33 (0) 2 [email protected]

    SIMONA S.A. Mulhouse15, Avenue ValparcBtiment D2F -68440 HabsheimPhone +33 (0) 3 89 64 44 66Fax +33 (0) 3 89 44 64 [email protected]

    SIMONA UK LIMITEDTelford DriveBrookmead Industrial ParkGB -Stafford ST16 3STPhone +44 (0) 1785 22 2444Fax +44 (0) 1785 22 20 [email protected]

    SIMONA AG SCHWEIZIndustriezoneBumlimattstrasseCH -4313 MhlinPhone +41 (0) 61 8 55 9070Fax +41 (0) 61 8 55 [email protected]

    SIMONA S.r.l. ITALIAVia Padana Superiore 19/BI -20090 Vimodrone (MI)Phone +39 02 25 08 51Fax +39 02 25 08 [email protected]

    SIMONA IBERICA SEMIELABORADOS S.L.Doctor Josep Castells, 2630Polgono Industrial FonollarE-08830 Sant Boi de Llobregat Phone +34 93 635 4103Fax +34 93 630 88 [email protected]

    SIMONA-PLASTICS CZ, s.r.o.Zdebradsk ul. 70CZ -25101 Rcany / JazlovicePhone +420 323 63 78 3-7/-8/-9Fax +420 323 63 78 [email protected]

    SIMONA POLSKA Sp. z o.o.ul. H. Kamienskiego 201219PL-51-126 WrocawPhone +48 (0) 71 3 52 80 20Fax +48 (0) 71 3 52 81 [email protected]

    SIMONA FAR EAST LIMITEDRoom 501, 5/FCCT Telecom Building11 Wo Shing StreetFo TanHongkongPhone +852 29 47 01 93Fax +852 29 47 01 [email protected]

    SIMONA AMERICA Inc.PO Box 158755 Oakhill RoadMountaintop, PA 18707USAPhone +1 570 474 4406Fax +1 570 474 [email protected]

    SIMONA AGTeichweg 16D -55606 KirnPhone +49 (0) 67 52 14-0Fax +49 (0) 67 52 [email protected]

    Plant I/IITeichweg 16D -55606 KirnPhone +49 (0) 67 52 14-0Fax +49 (0) 67 52 14-211

    Plant IIIGewerbestrae 12D -77975 RingsheimPhone +49 (0) 78 22 436-0Fax +49 (0) 78 22 436-124

  • K+

    D 0

    5/0

    4 -

    30

    00

    - Jo

    hnenSIMONA UK LIMITED Telford Drive Brookmead Industrial Park GB -Stafford ST16 3ST

    Phone +44 (0) 1785 22 2444 Fax +44 (0) 1785 22 20 80

    [email protected] www.simona.de

    SIMONA AG Teichweg 16 D-55606 Kirn Phone +49 (0) 67 52 14 -0 Fax +49 (0) 67 52 14 -211

    [email protected] www.simona.de


Recommended