GF Micro Optics Philippines, Inc. LTI Standard Factory Building 134 East Main Avenue, SEPZ Laguna Technopark, Biñan, Laguna 4024 Philippines Tel: +63 2 751 0304 Fax: +63 2 751 0305 www.gofoton.ph Go!Foton Inc. (Japan) 5-4 Tokodai, Tsukuba City Ibaraki Pref. Japan, 300-2635 Tel: +81 029 847 8686 Fax: +81 029 847 8693 www.gofoton.co.jp Go!Foton Europe Sales Hoogerheide The Netherlands [email protected]Tel: +31 164 62 04 22 Fax: +31 164 62 04 17 www.gofoton.eu Go!Foton Headquarters 28 World’s Fair Drive Somerset, NJ 08873, USA Tel: +1 732 469 9650 Fax: +1 732 469 9654 www.gofoton.com Go!Foton West Coast Sales 100 Century Center Court, Suite 203 San Jose, CA 95112, USA Go!Foton Nanjing Company Ltd. Nanjing Jiangning National High Tech Industrial Park Nanjing Jiangning Science Park 2 Qiande Road, Building 7, 1st Floor Jiangning, Nanjing Jiangsu, 211100, China Tel: +86 25 5216-3442 www.gofoton.cn Bring Light to Life™ PEACOC™ High Density Fiber Management Platform Features: • Up to 144 simplex LC connectors per 1RU • Unparalleled accessibility - easy, fast, and accurate • Access to both front & rear connectors at the same time • Scalable in increments of 1RU for true “pay-as-you-grow” convenience • Tested by Telcordia for compliance with GR-449 Issue 3, GR-63, and Verizon TPR.9464 standards Applications: • Data center, Telecom Central Office, CATV Headend + OSP Cabinets • Patch, Patch & Splice, Structured Cabling, MPO Fanouts • Support for Splitters, Couplers, Attenuators, and other optical components for next generation data centers Go!Foton is proud to offer a remarkably new and innovative optical fiber patch panel for Telecom and Datacenter applications which require ultra-high capacity and density. PEACOC TM is Go!Foton’s Platform with Enhanced Access for Compact Optical Connectors. It is a revolutionary technology platform that promises to enhance the way data center and telecom operators manage the increasingly complex world of optical connectivity. The PEACOC TM fiber patch panel is the industry’s first and only solution to allow tool-less access for up to 144 simplex LC connectors in just 1RU of rackspace. It is also the only high density solution which provides easy access to both the front plane and back plane connector at the same time - from the same side of the rack! The Go!Foton PEACOC TM technology platform accomplishes this feat while also improving the speed and ease at which even “large hand” technicians can access small form factor optical connectors. Higher capacity and higher density fiber connectivity solutions give service providers greater flexibility while also allowing telecom and data center providers to more efficiently and more cost effectively manage the explosive growth in the number of fiber connections. With PEACOC TM technology, each individual optical connection can be easily isolated from adjacent ports creating a generous region of unobstructed handling space for safe, fast, and error free management of optical fiber jumpers. Go!Foton’s 1RU PEACOC TM patch panel is fully compatible with existing 19” racks and cable management solutions. This makes PEACOC TM an ideal solution for operators looking to integrate high density connectivity solutions into their existing rack environment or into compact OSP cabinets for true “pay- as-you-grow” convenience and cost efficiency. For maximum port capacity and density, PEACOC may be deployed using Go!Foton’s integrated Fiber Distribution Frame which will allow up to 4320 total ports. Description:
Transcript
GF Micro Optics Philippines, Inc.LTI Standard Factory Building134 East Main Avenue, SEPZ
Go!Foton West Coast Sales100 Century Center Court, Suite 203
San Jose, CA 95112, USA
Go!Foton Nanjing Company Ltd.Nanjing Jiangning National
High Tech Industrial ParkNanjing Jiangning Science Park
2 Qiande Road, Building 7, 1st FloorJiangning, Nanjing
Jiangsu, 211100, China Tel: +86 25 5216-3442
www.gofoton.cn
Bring Light to Life™
PEACOC™ High Density Fiber Management Platform
PEACOC HD Frame
Features: • Up to 144 simplex LC connectors per 1RU• Unparalleled accessibility - easy, fast, and accurate• Access to both front & rear connectors at the same time• Scalable in increments of 1RU for true “pay-as-you-grow” convenience• Tested by Telcordia for compliance with GR-449 Issue 3, GR-63, and Verizon TPR.9464 standards
Applications: • Data center, Telecom Central Office, CATV Headend + OSP Cabinets • Patch, Patch & Splice, Structured Cabling, MPO Fanouts• Support for Splitters, Couplers, Attenuators, and other
optical components for next generation data centers
Go!Foton is proud to offer a remarkably new and innovative optical fiber patch panel for Telecom and Datacenter applications which require ultra-high capacity and density. PEACOCTM is Go!Foton’s Platform with Enhanced Access for Compact Optical Connectors. It is a revolutionary technology platform that promises to enhance the way data center and telecom operators manage the increasingly complex world of optical connectivity. The PEACOCTM fiber patch panel is the industry’s first and only solution to allow tool-less access for up to 144 simplex LC connectors in just 1RU of rackspace. It is also the only high density solution which provides easy access to both the front plane and back plane connector at the same time - from the same side of the rack! The Go!Foton PEACOCTM technology platform accomplishes this feat while also improving the speed and ease at which even “large hand” technicians can access small form factor optical connectors. Higher capacity and higher density fiber connectivity solutions give service providers greater flexibility while also allowing telecom and data center providers to more efficiently and more cost effectively manage the explosive growth in the number of fiber connections. With PEACOCTM technology, each individual optical connection can be easily isolated from adjacent ports creating a generous region of unobstructed handling space for safe, fast, and error free management of
optical fiber jumpers. Go!Foton’s 1RU PEACOCTM patch panel is fully compatible with
existing 19” racks and cable management solutions. This makes PEACOCTM an ideal
solution for operators looking to integrate high density connectivity solutions
into their existing rack environment or into compact OSP cabinets for true “pay-
as-you-grow” convenience and cost efficiency. For maximum port capacity and
density, PEACOC may be deployed using Go!Foton’s integrated Fiber Distribution
Accessibility Tool-less access to individual simplex connectors
Access direction Front of the rack access to both front & backplane connectors
Fiber routing Front only, Front and rear, Rear MPO, Rear pigtail
Height 1 RU
Width 19” Rack standard (default); 23” Rack standard (optional)
Depth Typical configuration (schematic above), varies by option
Cable Type PEACOCTM cable or Standard 1.2mm, 1.6mm, 2.0 jumpers
Fiber Type Singlemode: ITU-T G.657 A2(default); B2 or B3 (optional)Multimode: ITU-T G.651.1, OM3, OM4
Connector Type LC (simplex and duplex), SC, MPO
* Based on LC connector version (values are per 1 RU, 19” rack mount space)
~ Awarded US Patents: #8,939,792,B2 #9,344,776,B2 #9,151,920,B2 #9,258,916,B2 ~
PEACOC with optional rear MPO access
PEACOC with front only cable routing
The optical port density can be increased even further with the use of smaller form factor connectors, or by integrating multi-fiber push-on (MPO) connectors. The Go!Foton PEACOCTM technology platform addresses the biggest limitation associated with the use of high density fiber connectivity solutions today, namely, the difficulty in accessing and handling the compact optical connectors while performing typical move-add-change (MAC) services. Designed for use with either singlemode and multimode LC connectors, the PEACOCTM platform is also available for use with SC connectors. Other available options include full or partial pre-loading with standard or angled connectors using state of the art 1.2mm and 1.6mm fiber optic jumpers. A further enhancement in fiber management can be achieved by using the optional PEACOCTM fanout cable which combines 24-LC jumpers into a single 3.0mm cable design.
Bring Light to Life™
PEACOC™ High Density Fiber Management Platform
Ordering Information:
PProduct FamilyPEACOC
1 2 3 5 6 7 84
Example Order Code: P3SP5050R61X Description: PEACOC V3 Short, Patch Panel, 50mm Front & Rear Cable Sleeves,
3S V3 Short3L V3 Long3D V3 Long w/Deep Rear Doors3E V3 Short with Extension
2 Chassis/Tray Type
O Chassis (empty)P Patch PanelX Cassette Tray – Any Position (trays A-F)L Cassette Tray – Left Side (trays A-C)R Cassette Tray – Right Side (trays D-F)S Splice Tray Version
3 Front Cable Sleeve Length
_ _ Two Digit Length (mm)XX None
4 Rear Cable Sleeve Length
_ _ Two Digit Length (mm)XX None
5 Rear Cable Routing Direction
F FrontR RearX None
6 Number of Trays
_ 1-6 (max 6 trays fully loaded chassis)X None (also used for tray only)
7 Connector/Adapter Type
1 LC/UPC Blue Duplex Adapters2 LC/APC Green Duplex Adapters3 SC/UPC Blue Simplex Adapters4 SC/APC Green Simplex Adapters5 LC/UPC Blue Simplex Adapters6 LC/APC Green Simplex Adapters7 Black MPO AdaptersP Other
Item Code Code Description
8 Inner Cable Options
A 5M 12F 3.0mm OFNR SC Pigtail SMFB 5M 24F 3.8mm OFNR LC Pigtail SMFC 1x24F Angled Male MPO to LC Fanout SMFD 2x12F Angled Male MPO to LC Fanout SMFE 3x8F Angled Male MPO to LC Fanout SMFF 1x12F Angled Male MPO to SC Fanout SMFG 5M 12F 3.0mm OFNR SC Pigtail OM3 MMFH 5M 24F 3.8mm OFNR LC Pigtail OM3 MMFJ 1x24F Male MPO to LC Fanout OM3 MMFK 2x12F Male MPO to LC Fanout OM3 MMFL 3x8F Male MPO to LC Fanout OM3 MMFM 1x12F Male MPO to SC Fanout OM3 MMFP OtherR 2x8F Angled Male MPO to LC Fanout SMFS 2x8F Male MPO to LC Fanout OM3 SMFX None
GF Micro Optics Philippines, Inc.LTI Standard Factory Building134 East Main Avenue, SEPZ
