2
Compatible with the leading readers in the industry Easy to use personnel and patient registration PEBBLE II – I/O Conditioner The Venture Research Pebble II continues the tradition of cost effective I/O conditioning for RFID readers and improves on the reader compatibilty options and flexibility for reader interchange. The Pebble II supports all readers with just a cable change. No switch settings or other configuration is required to match the most extensive reader compatibility in the Industry General Purpose I/O Conditioner Works With All Readers Features Benefits RFID Solutions The most extensive RFID reader compatibility with only a cable change. Allows reader flexibility for multi vendor applications Integrated Status and Activity lights For installation and troubleshooting convenience, all I/O signals are brought out to activity lights to show the current status of all signals, whether input or output. Common Connection To All Industry RFID Readers Sealed Enclosure Allows For Harsh Environments Activity lights on all I/O points Provides quick troubleshooting of peripheral devices Extensive range of direct connect peripherals available such as stack lights, photo eyes, motion detectors, and relays. The Pebble converts the proprietary GP/IO interface between the readers with a compatible connector to a single common DB25 connector for all readers. The signals are converted in the Pebble, conditioned and then brought to industry standard connectors. All interfaces are connectorized to allow for splash and dust resistant implementations. Industry Standard Connectorization Industry standard connectorization for stack lights and photo eyes are directly available on the panel to allow quick disconnect and termination of I/O lines. Direct input for Allen Bradley photo eyes is a standard. The enclosure is provided in a NEMA 4 configuration to allow for splash and dust environments and is well suited for the food industry. To learn how conditioning I/O conditioners can work for you or to find out more about Venture Research’s products and solutions contact us at +1.866.RFID.111 or +1.469-246-4000 or visit us at www.ventureresearch.com Venture Research Inc. – 3001 Summit Ave, Suite 100 – Plano – Texas – 75074 www.ventureresearch.com Fast installation and setup Alien ALR-9780 Alien ALR-9800 Alien ALR-9900 Alien ALR-9650 AWID 2010 Feig ID ISC.LR200 Impinj / CSL CS461 Intelleflex I-Beam 500 Intermec IF5 Intermec IF61 Omron V740 Omron V750 Sirit Infinity 510 Motorola XR400/XR440 Tagsys Lx00 series ThingMagic M4/M5 Standard Functionality For Stack Lights and Photo Eyes The Pebble supports a wide range of photo eye, sensors, stack lights, relays, annunciators a signalers. Depending on the reader and the number of I/O points it supports, up to 2 stacklights with two annunciator modes, 4 inputs, and 2 optional relays are addressable using the GP/IO command set of the reader. Specialty configurations availiable Venture Research leads the industry in controller and specialty I/O configurations for the RFID industry and can develop any configuration and special I/O requirement with the best reader compatibilty in the industry. Special termination or connectorization options are available for special requirements. Fully connectorized to allow ease in termination and quick disconnect Allows for standard devices with standard interconnects to allow quick setup Completely sealed NEMA 4 enclosure and fittings Designed for harsh environments with splash and dust
