© 2007 Cisco Systems, Inc. All rights reserved. Cisco PublicITE PC v4.0Chapter 1 1
Perencanaan dan Pengkabelan Jaringan
Dosen Pengampu:Resi Utami Putri, S.Kom., M.Cs.
ITE PC v4.0Chapter 1 2© 2007 Cisco Systems, Inc. All rights reserved. Cisco Public
Objectives Mengidentifikasi dasar media jaringan yang diperlukan untuk
membuat koneksi LAN. Mengidentifikasi jenis koneksi untuk koneksi intermediate device
dan end device LAN.- Mengidentifikasi konfigurasi untuk kabel straight-through dan
crossover.- Mengidentifikasi jenis kabel yang berbeda, standard dan port yang
digunakan untuk koneksi WAN.- Mendefinisikan peran manajemen koneksi perangkat ketika
menggunakana peralatan Cisco atau lainnya.
Merancang skema pengalamatan untuk inter-network dan memberikan ranges untuk host, network devices dan the router interface.
Membandingkan dan membedakan pentingnya desain jaringan.
ITE PC v4.0Chapter 1 3© 2007 Cisco Systems, Inc. All rights reserved. Cisco Public
Basic Network Media Required to Make a LAN Connection. Select the appropriate hardware, including the cabling,
to install several computers together in a LAN
ITE PC v4.0Chapter 1 4© 2007 Cisco Systems, Inc. All rights reserved. Cisco Public
Basic Network Media Required to Make a LAN Connection. To identify some key aspects of the devices they will be
employing in a LAN
ITE PC v4.0Chapter 1 5© 2007 Cisco Systems, Inc. All rights reserved. Cisco Public
Basic Network Media Required to Make a LAN Connection. Connect two computers with a switch
ITE PC v4.0Chapter 1 6© 2007 Cisco Systems, Inc. All rights reserved. Cisco Public
Types of Connections in a LAN Given a specific network connection, identify the type of
cable required to make the connection
ITE PC v4.0Chapter 1 7© 2007 Cisco Systems, Inc. All rights reserved. Cisco Public
Types of Connections in a LAN Identify the correct cable to use in connecting
intermediate and end devices in a LAN.
ITE PC v4.0Chapter 1 8© 2007 Cisco Systems, Inc. All rights reserved. Cisco Public
Types of Connections in a LAN Identify the pinout of the straight-through and cross-
over cables
ITE PC v4.0Chapter 1 9© 2007 Cisco Systems, Inc. All rights reserved. Cisco Public
Types of Connections in a LAN Recognize that a different class of cables is used to
connect WANs, and that the cables, standards and ports are different than those in use by LANs.
ITE PC v4.0Chapter 1 10© 2007 Cisco Systems, Inc. All rights reserved. Cisco Public
Types of Connections in a LAN Define the role of device management connections
when using Cisco equipment.
ITE PC v4.0Chapter 1 11© 2007 Cisco Systems, Inc. All rights reserved. Cisco Public
Design an Addressing Scheme for an Inter-network. Design an address scheme for an internetwork and
assign ranges for hosts, network devices and the router interface
ITE PC v4.0Chapter 1 12© 2007 Cisco Systems, Inc. All rights reserved. Cisco Public
Design an Addressing Scheme for an Inter-network. Calculate the address ranges for sub networks
ITE PC v4.0Chapter 1 13© 2007 Cisco Systems, Inc. All rights reserved. Cisco Public
Importance of Network Designs Given a network scenario, develop an appropriate
networking scheme
ITE PC v4.0Chapter 1 14© 2007 Cisco Systems, Inc. All rights reserved. Cisco Public
Importance of Network Designs Determine the total number of hosts in a network,
accounting for present and future requirements
ITE PC v4.0Chapter 1 15© 2007 Cisco Systems, Inc. All rights reserved. Cisco Public
Importance of Network Designs Given a network requirement, determine the optimum
number of sub networks in the larger internetwork.
ITE PC v4.0Chapter 1 16© 2007 Cisco Systems, Inc. All rights reserved. Cisco Public
Importance of Network Designs Describe how to count the segments between router
interfaces.
ITE PC v4.0Chapter 1 17© 2007 Cisco Systems, Inc. All rights reserved. Cisco Public
Summary
ITE PC v4.0Chapter 1 18© 2007 Cisco Systems, Inc. All rights reserved. Cisco Public