RECESSED SLIM LINE 15mm ............................................................... 4

RECESSED SLIM LINE 7mm .................................................................. 6

SLIM LINE 15mm ........................................................................................ 8

SLIM LINE 15mm with optic lens 30° .......................................... 10

SLIM LINE 15mm with optic lens 60° ......................................... 11

SLIM LINE 7mm ........................................................................................ 12

SLIM LINE 7mm with optic lens 30° ............................................ 14

SLIM LINE 7mm with optic lens 60° ............................................ 15

ALU-45 (45 degree light angle) ...................................................... 16

ALU-CORNER ............................................................................................. 19

POWER LINE 35mm ............................................................................... 22

POOWER LINE WIDE 80 ....................................................................... 24

RECESSED POWER LINE 35mm ...................................................... 26

ALU-ROUND .............................................................................................. 30

ALU-ROUND with optic lens 30° ................................................... 32

ALU-FLAT ...................................................................................................... 44

ALU-STAIR ..................................................................................................... 46

ALU-WALL .................................................................................................... 49

ALU-WALL-US ............................................................................................. 54

SLIM LINE WIDE 8mm ........................................................................... 56

RECESS SLIM LINE WIDE 8mm ......................................................... 58

SLIM LINE WIDE 15mm ........................................................................ 60

ALU-CEILINg .............................................................................................. 62

POWER LINE SLIM 30mm ................................................................... 65

RECESSED POWER LINE SLIM 30mm ........................................... 67

ALU-SWISS 15mm ................................................................................... 70

SLIM LINE WIDE 20mm ........................................................................ 72

RECESS SLIM LINE WIDE 20mm ...................................................... 74

SLW20B WALL INSTALLED LED PROFILE .................................... 76

PL35 ONE SIDE LIgHT OUTPUT ....................................................... 78

PL35 TWO SIDE LIgHT OUTPUT ...................................................... 80

ALU-SQUERE LED PROFILE ................................................................. 82

SLW10 LED PROFILE .................................................................84

O N

3

ADVANTAgES:

• High standard of anodizing aluminum surface • High Quality UV resistant polycarbonate snap in diffuser • Three different light diffusers to choice from, frosted (LEDs dots free), 50% frosted and transparent. • Reduced light lost design • Small dimensions only 15mm high • Suitable for standard LED stripes up to 12mm of wideness • Available on stock in anodized silver color • Possible length and color customizing at MOQ • Available with dedicated finish end caps • Indoor use only, IP20

FUTURES:

• Nice looking, clean, contemporary housing for the LEDs

• LEDs heat sink housing and mechanical protection for the LED stripes against damage

APPLICATIONS:

• Recessed under kitchen cabinets LED lighting• Floor led lighting (with IP54 led’s)• Recessed storage shelves LED lighting• Gypsum ceiling, wall accent LED lighting• Furniture production• Exhibition boot LED lighting

RECESSED SLIM LINE 15mmR L ; 5m

24,5

17,5

3,5

12,2

13,5 15

4

It is recessed type of the aluminum LED profile to build into material as MDF or other. The profile can be also recessed into floor (with IP54 LED ribbon inside only), wall or ceiling and the wide edges of the profile will cover the edges of insertion row completely. Extruded polycarbonate, high quality diffuser now is placing/removing from the front on click. It is UV resistant, and damage resistant (walk over safe, tested). Customer has a choice of three types of the diffusers what can be placed into that LED profile, frosted, 50% frosted and transparent.

The fully frosted diffuser do not shows led dots on the diffuser surface and the LED’s are not visible. Frosted diffuser is giving nice smooth light line. Base of the profile is made from anodized aluminum in standard silver color. The product can be customizing like anodized in 9 different colors, and paint in any RAL color. Additionally on the outside surface we can place tin/screech resistant foil, which imitates the wood structure on the profile for perfect mach with kitchen cabinets. All most popular woods structure foils are available.

Profile is available on stock in 1m or 2m sections with finish accessories as end caps or mounting brackets. The aluminum profile will provide mechanical and thermal protection for the LEDs. The profile can be use with high power LED’s up to 1W each. Led profiles are IP20 can be use outside with IP67 led ribbons only.

DE N

LP-AL-RSL15

LP-EC-RSL15

FEATURES:

• Recessed type with clean design• Cover up the edges of the mill Vely low profile,

only 7mm high Perfect for low power LED stripes • Diffuser placed/removed from the top Designed

for indoor use only• Available with frosted or clear diffuser• Made from aluminum / anodized

APPLICATIONS:

• Kitchen cabinets LED lighting• Furniture production• Interior accent lighting• Shop shelf exposition

LP-AL-RSL7

RECESSED SLIM LINE 7mmRS 24 m

6

Recessed Slim Line 7mm LED profile it is dedicated for build-in into surface material. The profile can be recess into any kind of surface and the expending to the sides the profile “wings” covers the mill row completely. This type of profile is often use for build in underneath kitchen cabinets LED lighting, retail store shelf lighting, floor, stairs, walls or ceiling accent LED lighting. The profile itself is generally dedicated for standard up to 12mm LED stripes. The profile is performing as the heat sink to the LEDs and appears as nice, stylish housing for the LEDs itself. It comes with choice of three different quality UV resistant, snap-in diffusers, frosted, 50% frosted and transparent. For RSL7 LED profile we offer some accessories such as finish end caps which helps to professionally finish the profile.

LP-EC-RSL7

D O

7

FEATURES:

• High quality diffuser, placing/removing from front on click• Led dots free profile (frosted)• Walk on safe diffuser, UV resistant polycarbonate diffuser• Available with 50% frosted, frosted and transparent diffuser• LED dots free on frosted diffuser (high density LED’s ribbon)• Made from anodizing aluminum• Suitable for low/high power led bars• Available lengths – 1m, 2m• Heat sink and physical protection to the LEDs• For indoor use only

APPLICATIONS:

• Furniture production (kitchen / office)• Interior light design (stairs / storage / floor)• Stores shelf LED lighting• Independent LED lamp• Exhibition boot LED lighting

SLIM LINE 15 mm

12,2

15

17,5

1

SL 5; 5 m

8

Slim Line 15mm is high quality surface mounting anodized aluminum LED profile which is dedicated for the standard LED stripes up to 12mm of wideness. The profile is coming with choice of three high quality UV resistant and damage resistant snap-in diffusers, frosted, 50% frosted and transparent. The profile with choice of frosted diffuser is “LEDs DOTS FREE” and deliver soft smooth light on the whole surface. The aluminum profile it is performing as the heat sink to the leds and also presents itself as the nice, stylish and professionally looking housing. Available accessories such as end caps or mounting brackets or optic lenses helps professionally finish every installation.

D P ON

LP-MC-SL15LP-EC-SL15

LP-AL-SL15

9

FEATURES:

Surface instalation LED profile with 30° optic lens, UV stabilized. It comes with choice of the mat or clear lens. Available in lengths of 1m/2m.

The outgoing light is concentrated into the 30° beam angle.

SLIM LINE 15 mmwith optic lens 30°

13

6

5

120° (led)

210

28,6°

104,4°

34,3°

SL 5; 5 m

Aluminum end caps for SL15LED profile with 30° optic lens

LP-EC-30SL15-H1, H2

30° optic lens for SL15 & SL7mat or clear nish

LP-AL-SL15-L30

0

FEATURES:

Surface instalation LED profile with 60° optic lens, UV stabilized. It comes with choice of the mat or clear lens. Available in lengths of 1m/2m.

The outgoing light is concentrated into the 60° beam angle.

SLIM LINE 15 mmwith optic lens 60°

; 7, m

60° optic lens for SL15 & SL7mat or clear nish

LP-EC-60SL15- H1, H2

Aluminum end caps for SL15LED profile with 60° optic lens

LP-AL-SL15-L60

13

3

3 50

120° (led)

250

37,4°

48,9° 60°

FEATURES:

• High quality diffuser, placing/removing from front on click• Walk on safe diffuser, UV resistant polycarbonate diffuser• Available with opal, 50% opal and transparent diffuser• Available lengths – 1m, 2m, 3,5m (large quantity orders)• Made from anodizing aluminum• Suitable mostly for flexible led stripes• For indoor use only• Low profile only 7mm high

APPLICATIONS:

• Furniture production (kitchen / office)• Interior light design (stairs / storage / floor)• Stores shelf LED lighting• Independent LED lamp• Exhibition boot LED lighting

LP-AL-SL7

SLIM LINE 7 mmS 7 mm

LP-MC-SL7

LP-EC-SL7

2

Slim Line 7mm it is surface mount high quality anodized aluminum LED profile only 7mm high which is dedicated for standard led stripes up to 12mm in the wideness. The profile is performing as the heat sink to the LEDs and appears as nice, stylish housing for the LEDs itself. It comes with choice of three different quality UV resistant, snap-in diffusers, frosted, 50% frosted and transparent. For this SL7 profile we offer several different accessories such as optic lenses, mounting brackets and end caps which helps to professionally finish the profile.

LP-MC-SL7

LP-EC-SL7

O

3

SLIM LINE 7 mmwith optic lens 30°

S 7 mm

Slim Line 7mm LED prole with 30° optic lens, available with UV stabilized lens in mat or transparent nish.

Aluminum end capsLP-EC-30SL7-H1, H2

LP-AL-SL7-L30

LP-EC-30SL7- H1,H2

120° (led)140°

115°

3,5

1

2,55

6

SLIM LINE 7 mmwith optic lens 60°

; 7 , m

Slim Line 7mm LED prole with 60° optic lens, available with UV stabilized lens in mat or transparent nish.

Aluminum end caps LP-EC-60SL7-H1, H2

LP-AL-SL7-L60

LP-EC-60SL7-H1, H2

120° (led)

115° 1

53

61°

3,5

2,5

5

FEATURES:

• Highqualitydiffusernowplacingfromthefrontonclick• PolycarbonateUVresistant,damageresistant(walkoversafe)• Diffuseravailableintransparent,50%opalandopal• Baseoftheprofileismadeinanodizedaluminum• ProfileavailableinRAL9010andstandardanodecolor• Profileisavailableinlengths1m/2mor3,5m(largequantityorder)• ALU CORNERissuitableforlowpowerandhighpowerleds• Simplicitydesignwithhighqualityfinish

APPLICATIONS:

• UnderkitchencabinetsLEDlighting• StoresshelvesLEDlighting• Furnitureproduction,insidecabinetsLEDlighting• StorageshelvesLEDlighting• ExhibitionbootLEDlighting

ALU-45˚LEDPROFILE

LP-EC-D1Endcapw/outcablehole

LP-EC-D2Endcapwithcablehole

LP-MC-D1Mountingbracket

A U 4 ˚; m

ThisisQualityanodizedaluminumLEDprofileinsilverorRAL9010finishcolorwith45˚degreeLEDslightemittingangle.ALU-45˚hasbeendesignedtofitinatanycornerLEDlightingapplication.ThelightemittedbytheLEDsisdirectedbytheshapeoftheprofilein45˚degreeangletodonotblindthepersonwhostandsinfrontofit.TheLEDprofileisdedicatedforthestandardLEDstripesupto12mmofwideness.Largeamountofaluminumweight[0,45kg/m]providesexcellentthermalheatsinkconditiontotheLEDsandalsopresentsitselfasthenice,stylishandprofessionallylookinghousing.Theprofileitisabletohandleandmaintainstabletemperature[45/50˚C]atlongperiodoftimetheinloadupto25W/m.ItcomeswithchoiceofthreedifferentQualityUVresistant,snap-indiffusers,frosted,50%frostedandtransparent.TheavailableaccessoriesforALU-45˚LEDprofilesuchasendcapsandmountingbracketshelpsprofessionallyfinishtheinstallation.

LP-AL-D2LP-EC-D1Endcap LP-MC-D1

Mountingbracket

D P ON

7

F h

rn r s i

t l

5˚ A O O

8

FEATURES:

• Highqualitydiffusernowplacedfromthefrontonclick• PolycarbonateUVresistant,damageresistant(walkoversafe)• Diffuseravailableintransparent,50%opalandopal• Baseoftheprofileismadeinanodizedaluminum• ProfileisavailableinRAL9010andstandardanodizedcolor• Profileisavailableinlengths1m/2mor3,5m

(largequantityorder)• ALU CORNERissuitableforlowpowerandhighpower

APPLICATIONS:

• UnderkitchencabinetsLEDlighting• StoresshelvesLEDlighting• Furnitureproduction,insidecabinets

LEDlighting• StorageshelvesLEDlighting• ExhibitionbootLEDlighting• InteriorLEDlighting

ALU-CORNER m

8.25

9

ProfileismadefromanodizedaluminuminsilverorRAL9010finishcolorwith45˚degreeLEDslightemittingangle.ALU-CORNERhasbeendesignedtofitinatanycornerLEDlightingapplication.ItisoftenuseforunderkitchencabinetsandshelfLEDlighting.ThelightemittedbytheLEDsisdirectedbytheshapeoftheprofilein45˚degreeangletodonotblindthepersonwhostandsinfrontofit.TheLEDprofileisdedicatedforthestandardlowpowerormidpowerLEDstripesupto25W/mwhichwidenessisupto12mm.TheprofileisperformingastheheatsinktotheLEDsandappearsasnice,stylishhousingfortheLEDstripesitself.TheprofileiscomingwithchoiceofthreehighQualityUVresistantanddamageresistantsnap-indiffusers,frosted,50%frostedandtransparent.Itisavailableonstockwithrelatedaccessoriessuchasendcapsandmountingbracketswhichhelpsprofessionallyfinishtheprofile.

ESC I

20

E AC

LP-MC-E1Mountingbrackets

LP-MC-E1

LP-EC-E1LP-EC-E2Endcapwithcablehole LP-EC-E2

LP-AL-E1

2

FEATURES:

• Highstandardofanodizingaluminumsurface• HighQualityUVresistantpolycarbonatesnapindiffuser• Twodifferentlightdiffuserstochoicefrom,frosted

(LEDsdotsfree)andtransparent.• LEDsDOTSFREEdesign(frosteddiffuser)• Contemporarydesignwhichcanbesuspendedfromtheceilingorsurfaceinstalled• SuitableforstandardorhighpowerLEDstripesupto30W/m• Availableonstockinanodizedsilvercolor• PossiblelengthandcolorcustomizingatMOQ• Availableonstockwithdedicatedaccessoriessuchastwotypeofendcaps• Indooruseonly,IP20

APPLICATIONS:

• LEDlampcomponent• RetailstoremainceilingLEDlighting• SuspendedLEDlightinglamp• Exhibitions,hotels,restaurantsmainLEDlighting• DecorativelinearLEDlighting• ExhibitionbootLEDlighting

POWERLINE35mm

EndcapstypeLP-EC-PL1

EndcapstypeLP-EC-PL2

24

35

31

35

30

20

ST2 2

PL m 5m

22

ThisprofileisdedicatedtobeuseastheLEDlightingxtureformainlightingattheoffices,librariesshowroomsorabovethekitchentable.Itismadefromanodizedaluminumandissuitableforupto32mmwidehighpowerLEDbars.

Theprofilecanbesuspendedfromtheceilingonthestainlessstillwiresorcanbescrewitdirectlytothesurface.ProfilecomeswithpolycarbonateUVresistantfrostedortransparentdiffuserplacedandremovedfromthefrontonclick.

Wehavedesignedtwotypesofnishedendcupsfortwodierentinstallationoptions.Profileisavailableinlengthof1mor2m.

LP-AL-PL

EndcaptypeLP-EC-PL1

D P ON

23

POWERLINEWIDE80mm

This is new surface installation 80mmwidth high qualityanodized aluminum LED profile with “LEDs DOTS FREE”frosteddiffuser.

The anodizing surfacequality is the same as in other ourprofilesanditisfreeofanyextrusionmarksandproductionscreeches. Anodizing surface is tick enough to resistthe transportation and sometimes difficult operatingcondition. Extended internal LED chamber dimensionsforLEDstripesgivesyoufreehansoftypeandsizeofLEDstripe/swhatcanbeaccommodate insidetheprofile.Youcanusealmostanytypeofledstripeandyoudecidehowmuch light will came out by using the right LED stripe.Theheavydutyheat sink (PLW80profile) is prepared andcapable to provide excellent cooling system forlow/highpowerLEDbars[upto35W/m].Speciallyshaped internal chamber reduce the light lost(bouncing of the light inside the profile) anddrive the light sleight up to the diffuser surfacewhere the light diffusion is taking place. Theprofile is coming with choice of two high qualityUV stabilized, snap in diffusers in frosted andtransparent. PLW80 profile is available with colormatchingaluminumendcapsforprofessionalfinish.

P W 0; 0 m

LP-EC-PLW80Aluminumendcaps

LP-AL-PLW80

2

25

RECESSEDPOWERLINE35mm

LP-EC-RPLEndcaps

24 3

34

35

35

44

31

30

20

ST2.2

RPL m

FEATURES:

• Highqualitypolycarbonatediffuser• NoLEDdotsshowsonthediffusersurface• Righthigh,softandsmoothlightdiffusion• Diffuserisplaced/removedfromthetoponclick• Highqualityanodizedaluminumbase• Heavyduty“heatsink”forhighpowerLEDs• Compatiblewithour30mmwidehighpowerLEDbars• Matchingfinishendcupsforthisprofileareavailable• Gypsumceilinginstallation• Availableinlengthof2m/1mwithclearorfrosteddiffuser

APPLICATIONS:

• ShowroomsceilingLEDlighting• RestaurantsceilingLEDlighting• ShoppingmallsLEDlighting

2

ThisprofileisdedicatedtobuildintothegypsumceilingastheLEDlightingxtureformainlightingattheoffices,showrooms,restaurantsandshops.Itismadefromanodizedaluminumandissuitableforupto32mmwidehighpowerLEDbars.ProfilecomeswithpolycarbonateUVresistantfrostedortransparentdiffuserplacedandremovedfromthefrontonclick.Thelightdiusionwiththefrosteddiffuseriscomplete.RPL35isgivingsoftlightonthewholesurface.ProfileisdedicatedforthehighpowerLEDlighting.Itisavailableinlengthof1mor2m.

D P ON

27

27

12

6038

27

60 35

33

4

ST 3.5x9.5(DIN 7970-1985)

381227

33

4

35

ST 3.5x9.5 DIN 7970-1985)

Gypsumceilinginstallation.

CE E O R I L NO IO

OPTION1.W/OUTFIRERESTRICTIONS

OPTION2.W/OUTFIRERESTRICTIONS

28

38

39

12

35

33

4

ST 3 5x19 (DIN 7970-1985)

38

OPTION3.WITHFIRERESTRICTIONS

CE E O R I L NO IO

LP-EC-RPL

LP-AL-RPL

29

ALUROUNDØ24mmALU R UND; 2

FUTURES:

• Highqualityroundshapepolycarbonatediffuser• Diffuserisplaced/removedfromthetoponclick• Highqualityanodizedaluminumbase• Heavyduty“heatsink”forhighpowerLEDs• Compatiblewithupto12mmwidehighpowerLEDbars• Availablefinishendcupsandmountingsystemwith

angleregulation• Twodifferentinstallationoptions(wallorsuspended)• Availableinlengthof2m/1mwithclearorfrosteddiffuser

APPLICATIONS:

• Hotelsheadboardbedreadinglampwithangleregulation

• ShowroomstrackLEDlighting• ReceptiondeskmainLEDlighting• RestaurantsabovetablemainLEDlighting• ShoppingboutiquesexpositionLEDlighting

121,2o

Ø24

14,2

12,2

5

1,2

30

ThisissmallroundshapeLEDprofilewithrounddiffuser.Ithasbeendesignedforhighpowerledlighting.MassivealuminumweightprovidesexcellentmechanicalandthermalprotectiontotheLEDs.TheprofileismadefromanodizedaluminumanditcomeswithroundUVresistantpolycarbonateclearorfrosteddiffuser.Theinstallationofthediffuserisfromthefrontonclick.Installationandremovingiseasyandsimple.Itcomesin1mor2msectionsandissuitableforhighpowerledlighting.TheALU-ROUNDcanbeinstalledinthewardrobeorclosetastheclothesrodledlighting,inthejewelrycases,refrigeratedcabinetsatthegrocerystoreandotherplaces.

D P ON

LP-EC-R2

LP-EC-R1

LP-MC-R1

LP-AL-R0

3

48

ALU-ROUND with 30° optic lens

LU ROUND; Ø 4

2

5

1

12 20

79

6

3 50

250

120°

81,4°

39,6°

20°

12 20

79

6

5

210

120°

67,4°

42°

20°

1:1

Alu-Round profi le with 30° lensLEDs type 3528

Alu-Round profi le with 30° lensLEDs type 5060

LP-AL-RO-LK1, K2

LP-EC-30ROAluminum End Caps

fi =24

32

A O N E O

This is specially dedicated wall arm for the Alu-Round Led profi le. The special material will draw behind the profi le is allowing us to slide in the arm and hold fi rmly in place the LED fi xture.

The power feeding cable was transferred to the profi le thru the wall arm the best possible way.

The profi le now can be installed at any place on the wall lighting up the wall or some objects standing next to. The design of the wall arm is matching with the design of the Alu-Round profi le.

Wall-Arm

ll m

feeding cable

i

step 1

M O k

p 2

w u i wi f n c

10

5

20450

2

scale 1:1LP-MC-RO-WA

20

32

102

33

O D AC O Wall-Arm Instalation guide

Wall

Dr ll 8(for wire 2x4)

2

ALU-Round

Wire 2mmx4mm

Cover sticker

LP-MC-RO-WA20

32

102

LP-MC-RO-WA cross section look

LP-AL-RO

A

A

2x M3 Screw

3

A O N E O Art Lighting Arm

The main purpose for this arm is lighting from down or from above the objects such as art work, gallery, jewelry etc.

The light emitted by leds is directed in 45 degree angle.

The arm is matching perfectly with the Alu-Round led profi le.

The feeding cable is hidden in the arm and can be coverd by the sticky aluminum imitating tape.

AL-EC-RO-AA

35

O D AC O Art Lighting Arm

AL-EC-RO-AA

1225

15

5

2

Cross section look

256,8

39,5

69,8

Feeding cable mill

scale 1:1

3

A O N E O

LP-EC-R1aluminum

LP-MC-R1

Fluent lighting angle regulation from 0-180 degreewith the mounting clip LP-MC-R1

LP-EC-R2

LP-EC-R1

180 degree position

37

O D AC O Closet bracket for Alu-Round led profi le

R20,5

scale 1:1

24

155

4

scale 1:1

Wall to wall closet led rod (Alu-Round) installation

LP-MC-R2Closet bracket

Closet brackets are made from special material whichdo not brake during the screwing or heavy load

LP-AL-RO

LP-MC-R2

38

A O N E O Intermediate support arm for Alu-Round led profi le for closet mount

Stem mount of 1m led profi le (Alu-Round) at the closet

End mount type - 2m of led profi le Alu-Round at the closet with closetbrackets and intermediate support arm

Maximum capability of weight handling per one arm is 25kg

Alu-Round intermediate support arm LP-MC-R3

32,4mm

62 m

m

scale 1:1

Stem mount type of led profi le (Alu-Round) at the closetwith intermediate support arm

End mount type 1m of led profi le (Alu-Round) at the closet with closet brackets and intermediate support arm

39

A R N ES O E Intermediate support arm for Alu-Round led profi le for closet mount

LP

L O

LP-EC-R1

LP-MC-R3

LP-AL-RO

Maximum capability of weight handling per one arm is 25kg

STEM MOUNT

0

A O N E O Intermediate support arm for Alu-Round led profile for closet mount

Intermediate supportsLength : 100cm/39,4” - 3pcs 200cm/78,8” - 5pcs

STEM MOUNT

4

END MOUNT

A R N ES O E Intermediate support arm for Alu-Round led profi le for closet mount

Maximum capability of weight handling per one arm is 25kg

LP-MC-R2End mount closet bracket

LP-AL-RO

LP-MC-R3Intermediate support arm

M

R

L M R

2

A O N E O Intermediate support arm for Alu-Round led profi le for closet mount

(example 1000mm) [39,37"]SPECIFY LENGHT

70m

m [

2,76

"]

(example 2040mm) [80,31"]SPECIFY LENGHT

Closet bracket

Housing

Lens

Nut M3Washer M3

Screw M3

Self-threded wood screw

End mount

Feeding cable

End mount

Intermediate supportsLength : 100cm/39,4” - 1pcs 200cm/78,8” - 2pcs

END MOUNT

43

ALU FLAT LED PROFILEALU FLAT; 7

FUTURES:

• High quality diff user now placed from the front on click• Polycarbonate UV resistant, damage resistant (walk over safe)• Diff user available in transparent, 50% opal and opal• Base of the profi le is made in anodized aluminum• Profi le is available in RAL9010 and standard anodized color• Profi le is available in lengths 1m/2m or 3,5m (large quantity order)• ALU-FLAT is suitable for low power and high power LEDs• Simplicity in design with high quality fi nish• Profi le and diff user is “walk over safe”• Protection grade IP20

APPLICATIONS:

• Under kitchen cabinets LED lighting• Stores shelves LED lighting• Floor LED lighting• Storage shelves LED lighting• Exhibition boot LED lighting• Interior LED lighting

LP-AL-FL

FLFL-EC-FL3End cap with holding ear

FLLP-EC-FL1End cap without holding ear

LP-EC-FL1 LP-EC-FL2LP-EC-FL3

A C E

Aluminum LED profi le only 7,6mm. The aluminum profi le walls thickness and the damage resistant diff user allow you to walk over this profi le. It has been positively tested and is “walk over” safe. The profi le is available in anodized version of aluminum and RAL9010. Profi le comes with polycarbonate UV resistant, damage resistant diff user, which now is placed, into the profi le from front for click. The customer has choice of use transparent, 50% frosted and frosted diff user. Profi le provides mechanical and thermal protection (heat sink) to the LEDs and is suitable for high power LED lighting. The profi le has many diff erent applications it can works as under store shelves independent LED lamp or can be installed on the fl oor to cover the connection and provide additional protection for the computer cables.

D P ON

45

ALU STAIR LED PROFILEALU TAIR; 6 27

6 6 . 9 2

4 4 . 4 1

627

.36

3 9 °

1 5

1 2 . 2

1

1 . 61 . 4

1 . 6

1 4 . 2

FUTURES:

• Hard aluminum alloy and special anodizing thickness • High standard of anodizing aluminum • High Quality UV resistant polycarbonate snap in diff user• Two diff erent light diff users to choice from, frosted

(LEDs dots free) and transparent.• LEDs DOTS FREE design (frosted diff user)• Stair installed LED profi le with smooth line of light• Suitable for standard or high power LED stripes up to 30W/m• Available on stock in anodized silver color• Possible isolation of the diff user and end cap against

water with transparent silicone• Possible length and color customizing at MOQ• Available on stock with dedicated end caps• Indoor use only, IP20

APPLICATIONS:

• Stair LED lighting illumination • Hotels, cinemas, restaurants, night clubs, stair LED lighting

Stair installed LED profi le is designed for steps illumination in darker rooms. It has been made from hard anodized aluminum alloy for walk over safety and time ware out resistant. The profi le is coming with choice of two high quality UV resistant, damage resistant snap-in diff users in frosted and transparent. The frosted diff user is “LEDs DOTS FREE” and is giving nice and soft smooth line of light on the whole diff user surface. The profi le LED chamber can accommodate standard or high power led stripes up to 12mm of the wideness. The profi le can be installed inside or outside if connected with IP67 LEDs stripes and profi le LED chamber will be silicone insulated against water. The available accessories such as end caps helps professionally fi nish the profi le. Installation steps are fully explained in the PDF catalogue.

D P ON

LP-AL-ST

LP-EC-SRend cap (left)

hard aluminum alloy, ware out resistant

LP-AL-ST

free space for silicone insulation of the led chamber (option)

free space for silicone insulation of the led chamber (option)

dots free led profi le (frosted)12,2 mm wide led chamber

47

IR P F E Stair instalation guide

STEP 1

STEP 2

STEP 3

8

ALU-WALL LED PROFILEL ; 2 , mm

FUTURES:

• Asymmetric, wall installed LED profi le for fl oor LED lighting • High standard of anodizing aluminum surface • High Quality UV resistant polycarbonate snap in diff user• Two diff erent light diff users to choice from, frosted or transparent.• Minimalistic design• Extra LED heat silk capability of the profi le (up to 30W/m)• Available on stock in anodized silver color• Suitable for high power or low power LED stripes• Possible length and anodizing color customizing at MOQ• Available on stock with dedicated fi nish end caps• Indoor and outdoor use (outdoor with IP67 leds)

APPLICATIONS:

• Asymmetric, wall build-in type LED profi le for fl oor LED lighting

• Floor hallways LED lighting profi le• Perfect for hotels hallways, restaurant,

hospitals, underground• Walkways LED lighting

49

LP-EC-WLL

LP-EC-WLR

Wall installed led profi le2m units only

LP-AL-WLLP-AL-WLB

Asymmetric, High Quality anodized aluminum LED profi le which has been design to instal into wall and the light is directed to the fl oor.

It is perfect solution for fl oor LED lighting of long walking area such as hotels hallways, underground subway stations, shopping malls, museum hallways, building fasade. The profi le can be use inside or outside with connection of IP67 LEDs inside. The LED profi le is dedicated for the standard LED stripes up to 12mm of wideness. The profi le is coming with choice of two high quality UV resistant, damage resistant snap-in diff users, frosted and transparent. The aluminum profi le it is performing as the heavy heat sink to the LEDs [0,9kg/m] and also presents itself as the nice, stylish and professionally looking housing. ALU-WALL is suitable for high power [up to 30W/m] or low power LEDs. It is available on stock with related accessories such as end caps which helps professionally fi nish the profi le. Installation options are fully explained in the PDF catalogue.

E RIP O

0

A W A O O O

FLOOR

INSTALATION OPTION No. 1

30cm

- 50

cm

18

6

LL

5

A A O O O

INSTALATION OPTION No. 230

cm -

80cm

Ceiling

Floor

6

18

2

A W A O O O

INSTALATION OPTION No. 3

60

25

1.

AL W LL 3

2.

3.

53

ALU-WALL US LED PROFILEALU ALU W LL US; 6 7

FUTURES:

• Floor LED lighting profi le for wood structure walls to build-in • High standard of anodizing aluminum surface • High Quality UV resistant polycarbonate snap in diff user• Two diff erent light diff users to choice from, frosted or transparent.• Minimalistic design• Extra LED heat silk capability of the profi le (up to 30W/m)• Available on stock in anodized silver color• Suitable for high power or low power LED stripes• Possible length and anodizing color customizing at MOQ• Available on stock with dedicated fi nish end caps• Indoor and outdoor use (outdoor with IP67 leds)

APPLICATIONS:

• Floor LED lighting profi le for wood structure walls to build-in(US,Canada)

• Floor hallways LED lighting profi le• Perfect for hotels hallways, restaurant,

hospitals, underground• Walkways LED lighting

End cap feeding cable hole is adapted for 1/8” pipe connector

LP-EC-WLA-Lend cup left

LP-EC-WLA-Rend cap right

LP-AL-WLA

L O OP O S

12" -

20"

5/8"

0,24"

Asymmetric, anodized aluminum LED profile which is dedicated for build-in into the wood structure walls and direct the LED light to the floor.

The thickness of the profile [16mm] is about the same as the standard wood plywood sheets used for wall construction at US or Canada. The profile itself is modification of the standard ALU-WALL profile and adaptation for different buildings, houses and walls construction structure at some places in the world. The other parameters and product functions are the same like for standard ALU-WALL LED profile.

D P ON

A

2" 16"4

55

SLIM LINE WIDE 8mmSLW ; 2 6

FUTURES:

• High standard of anodizing aluminum surface • High Quality UV resistant polycarbonate snap in diff user• Two diff erent light diff users to choice from, frosted or transparent.• Reduced light lost design• Small dimensions only 8mm high• Extra space inside the profi le (20mm) for IP67 led ribbons,

RGB or double row LED stripe• Available on stock in anodized silver color• Possible length and color customizing at MOQ• Available with dedicated accessories such as end caps

and mounting brackets• Indoor use only, IP20

APPLICATIONS:

• Led lamps• Retail store shelf LED lighting• Kitchen cabinets LED lighting• Exhibitions, hotels, restaurants LED lighting• Interior design linear LED lighting

Slim Line Wide 8mm, surface mount profi le has been design and made for wider then standard (10/12mm) LED stripes.

The wideness inside the profi le is 20mm and can accommodate any type of the led stripes available on the market such as double row LED stripes, RGB strips, digital RGB ribbons or waterproof ribbons in single color or RGB version which do not fi t into standard profi le. The wide diff user is not cutting down the angle of the LEDs and presents itself as the quality product. The profi le it is available with two snap-in UV resistant diff users, frosted and transparent. The larger amount of aluminum it is performing as the heat sink to the LEDs and also appears as the nice looking housing. The installation can be easily and professionally fi nish with available accessories such as end caps and mounting brackets.

D P ON

LP-EC-SLW8LP-MC-SLW8LP-AL-SLW8

57

RECESSED SLIM LINE WIDE 8mmR LW ; 7 2 6

FUTURES:

• High standard of anodizing aluminum surface • High Quality UV resistant polycarbonate snap in diff user• Three diff erent light diff users to choice from, frosted,

50% frosted and transparent.• Reduced light lost design• Small dimensions only 8mm high• Extra space inside the profi le (20mm) for IP67 led ribbons,

RGB or double row LED stripe• Available on stock in anodized silver color • Suitable for low power LED stripes • Possible length and color customizing at MOQ• Available with dedicated fi nish end caps• Indoor use only, IP20

APPLICATIONS:

• Build-in type LED profi le• Retail store build-in shelf LED lighting• Kitchen cabinets build-in LED lighting• LED profi le for fl oor, wall, ceiling build-in LED lighting• Exhibition stands, hotels, restaurants LED lighting • Interior design LED lighting

29,6

18,45,6 5,6

20

22,6

1,3

8,47

5,75

5,758,

47

8

Recessed Slim Line Wide 8mm is the version of the LED profi le for build-in into material. The profi le can be recess into any kind of surface and the expending to the sides the profi le “wings” covers the mill row completely. This type of profi le is often use for build-in underneath kitchen cabinets led lighting, retail store shelf lighting. The profi le itself is generally dedicated for wider then standard (10/12mm) LED stripes. The wideness inside the profi le is 20mm and can accommodate any type of the led stripes available on the market such as double row LED stripes, RGB strips, digital RGB ribbons or waterproof ribbons in single color or RGB version which do not fi t into standard profi le. The wide diff user is not cutting down the angle of the LEDs and presents itself as the quality product. The profi le it is available with two snap-in UV resistant diff users, frosted and transparent. The larger amount of aluminum it is performing as the heat sink to the LEDs and also appears as the nice looking housing. The installation can be easily and professionally fi nish with available accessories such as aluminum end caps.

D P ON

LP-EC-RSLW8

LP-EC-RSLW8

LP-AL-RSLW8

59

SLIM LINE WIDE 15mmSLW ; 22 6mm

FUTURES:

• High standard of anodizing aluminum surface • High Quality UV resistant polycarbonate snap in diff user• Two diff erent light diff users to choice from, frosted

(LEDs dots free) and transparent• LEDs dots free diff user (frosted diff user)• Small dimensions only 15mm high• Extra space inside the profi le (18mm) for IP67 led ribbons,

RGB or double row LED stripe• Available on stock in anodized silver color • Suitable for high power LED stripes up to 30W/m• Possible length customizing at MOQ• Available with dedicated fi nish end caps and mounting bracket• Indoor use only, IP20

APPLICATIONS:

• Led lamps• Retail store shelf LED lighting• Kitchen cabinets LED lighting• Exhibitions, hotels, restaurants LED lighting• Interior design linear LED lighting

18,4±0,15

22,618

1,1

15,6

6

LP-MC-SLW15LP-EC-RSLW8

0

Slim Line Wide 15mm surface mount profi le is “LEDs DOTS FREE” design which deliver nice soft and smooth light diff usion on the whole surface of the diff user. In principles of the design it has been made for wider then standard (10/12mm) LED stripes. The wideness inside the profi le is 18mm and can accommodate any type of the LED stripes available on the market such as double row LED stripes, RGB strips, digital RGB ribbons or waterproof ribbons in single color or RGB version which wideness is bigger then 12mm and do not fi t into standard profi les. The wide diff user is not cutting down the angle of the LEDs that and presents itself with the aluminum body as the quality product. The profi le it is available with two snap-in UV resistant diff users, frosted and transparent. The larger amount of aluminum it is performing as the heat sink to the LEDs and also appears as the nice looking housing. The available accessories for SLW15 LED profi le such as end caps and mounting brackets helps professionally fi nish the installation.

D P ON

End CapLP-EC-SLW15

Mounting BracketsLP-MC-SLW15

LP-AL-SLW15

Slim Line Wide 15mmwith all accessories

6

ALU-CEILING LED PROFILEALU CEILING; x mm

FUTURES:

• RecessedtypewallwashLEDprofiles• HighQualityUVresistantpolycarbonatesnapindiffuser• Twodifferentlightdiffuserstochoicefrom,frosted

(LEDsdotsfree)andtransparent.• LEDsDOTSFREEdesign(frosteddiffuser)• ExtraspaceinsidetheLEDprofileforwideLEDstripesupto18mm• Recessdesignforbuildintogypsumceiling• SuitableforstandardorhighpowerLEDstripesupto30W/m• Availableonstockinanodizedsilvercolor• PossiblelengthandcolorcustomizingatMOQ• Availableonstockwithdedicatedendcaps• Indooruseonly,IP20

APPLICATIONS:

• MainceilingLEDlighting• RetailstoreceilingLEDlighting• HotelshallwaysLEDlighting• Exhibitions,hotels,restaurantsceilingLEDlighting

62

18mm

ItisQualityanodizedaluminumLEDprofileforbuild-inintothegypsumceiling.TheprofilewiththeLEDsbuilds-inbetweentheceilingandthewallwillemitthelightdirectedstraightdownfromthetopofthewall/ceilingtothefloor,washingupthenexttowallwithlight.Anotherpossibleandoftenuseinstallationforthisprofileistheinstallationbetweenthewallanddirectlightingofthefloor,constructionframeofthenotbuildwall.TheinstallationoptionshasbeenclearlyexplainedinthePDFcatalogue.ALU-CEILINGiscomingwithchoiceofhighqualityfrosted(“LEDsDOTSFREE”)ortransparentsnap-indiffuserandfinishendcaps.Thesnap-indiffuserismadefromUVresistantmaterial.Theprofilecanaccommodatestandardormidpowerledstripesupto18mmofthewideness.ThealuminumprofileisperformingastheheatsinktotheLEDsandalsopresentsitselfasnice,stylishhousingwhereallcomponentsarematchingandarehighquality.

O

45mm

6

LU E L S O O ON

64

POWERLINESLIM30mm; m

FUTURES:

• HighQualityspeciallytreatedanodizingaluminumsurface• HighQualityUVresistantpolycarbonatesnapindiffuser,30mmwide• Twodifferentlightdiffuserstochoicefrom,frosted

(LEDsDOTsFREE)andtransparent.• LEDsDOTsFREEdesign(frosteddiffuser)• Contemporarydesignwhichcanbesuspended

fromtheceilingorsurfaceinstalled• ExcellentheatsinktothehighpowerLEDs• SuitableforstandardorhighpowerLEDstripesupto30W/m• SeparatechambertohideLEDpowersupplier,cables• Availableonstockinanodizedsilvercolorfreeofanyextrusionmarks• PossiblelengthandanodizingcolorcustomizeatMOQ• Availableonstockwithdedicated

aluminumendcaps• Indooruseonly,IP20

APPLICATIONS:

• LEDlampcomponent• RetailstoremainceilingLEDlighting• SuspendedLEDlightinglamp• Exhibitions,hotels,restaurantsmainLEDlighting• DecorativelinearLEDlightingnhospitals,

underground• WalkwaysLEDlighting

6

ThePOWERLINESLIM30mmprofileishighQualityanodizingaluminumLEDprofilewith“LEDsDOTSFREE”frosteddiffuser.TheprofilehasbeendesignedtoworkasindependentsuspendedorsurfacemountingLEDprofilepreparedforfutureinstallationofhighpowerpowerLEDs[upto30W/m].Massivealuminumweight[1,1kg/m]anddimensionsprovidesexcellentthermalheatsinktotheLEDsandalsopresentsitselfasthenice,stylishandprofessionallylookinghousing.Theprofileitisabletohandleandmaintainstabletemperature[45/50o]atlongperiodoftimetheinloadupto30W/m.Theanodizingsurfaceoftheprofileisspeciallytreatedtobefreeofanymicroscreechesorextrusionprocessflowsmarks.TheprofileiscomingwithchoiceoftwohighQualityUVresistant,snap-indiffusersinfrostedandtransparent.Thefreespacechambercanbeuseforhidingthepowersupplierandcables.LEDprofileisavailablerelatedaccessoriessuchascolormatchingaluminumendcapswhichhelpsprofessionallyfinishtheprofile.

E C I

LP-EC-PLS (aluminumendcap)

LP-AL-PLS

66

RECESSEDPOWERLINESLIM30mm;

FUTURES:

• Recessedtypegypsumceilingbuild-inLEDprofilewith30mmwidediffuser• HighQualityspeciallytreatedanodizingaluminumsurface• HighQualityUVresistantpolycarbonatesnapin30mmwidediffuser• Twodifferentlightdiffuserstochoicefrom:frosted(LEDsDOTsFREE)andtransparent• LEDsDOTsFREEdesign(frosteddiffuser)• Recessdesignforbuildintogypsumceiling• ExcellentheatsinktothehighpowerLEDs• SuitableforstandardorhighpowerLEDstripesupto30W/m• Availableonstockinanodizedsilvercolorfreeofanyextrusionmarks• PossiblelengthandanodizingcolorcustomizeatMOQ• Availableonstockwithdedicatedaluminumendcaps• Indooruseonly,IP20

APPLICATIONS:

• MainceilingLEDlighting• RetailstoreceilingLEDlighting• HotelshallwaysceilingLEDlighting• Exhibitions,hotels,restaurantsceilingLEDlighting• DecorativelinearceilingLEDlightinghospitals,underground• WalkwaysLEDlighting

LP-EC-RPLS (aluminumendcaps)

67

Thisisrecessedtype30mmwide,“LEDsDOTSFREE”anodizedaluminumLEDprofilewhichisdedicatedforbuild-inintosuspendedgypsumceilingtoworkasthemainLEDlightingfixture.Thistypeofprofileisoftenuseforbuild-inintothegypsumceilingsattheoffices,showrooms,restaurants,hotelsandshops.ItismadefromanodizedaluminumandisdedicatedforhighpowerLEDs[upto30W/m].Largealuminumweight[0,9kg/m]providesexcellentthermalheatsinktotheLEDsandalsopresentsitselfasthenice,stylishandprofessionallylookinghousing.Theprofileitisabletohandleandmaintainstabletemperature[50/55o]atlongperiodoftimetheinloadupto30W/m.Theanodizingsurfaceofthisprofileisspeciallytreatedtobefreeofanymicroscreechesorextrusionprocessflowsmarks.TheprofileiscomingwithchoiceoftwohighQualityUVresistant,snap-indiffusersinfrosted“LEDsDOTSFREE”andtransparent.Theavailableaccessoriessuchascolormatchingaluminumendcapshelpsprofessionallyfinishtheprofile.InstallationoptionsarefullyexplainedinthePDFcatalogue.

E R O

LP-EC-RPLS (aluminumendcaps)

LP-AL-RPLS

68

3353

12

57

5030

Wkręt ST3 5x19DIN 968)

33

1227

30

50

43

Wkręt ST3 5x9 5(DIN 968)

27

12

6033

43

60

50

30

Wkręt ST3 5x9 5(D N 968)

WITHNOFIRERESTRICTIONS

RP 0 L O I

WITHFIRERESTRICTIONS

WITHNOFIRERESTRICTIONS

6

ALU-SWISSLEDPROFILEALU SWISS x mm

FUTURES:

• SmallindimensionsqualityfinishLEDprofilefor6mm/8mmwideLEDstripes• AvailablewithsnapininstallationbaseforALU-SWISSprofilewhichsimplifytheinstallation• Highstandardofanodizingaluminum• HighQualityUVresistantpolycarbonatesnapindiffuser• Twodifferentlightdiffuserstochoicefrom,frosted(LEDsdotsfree)andtransparent.• LEDsDOTSFREEdesign(frosteddiffuser)• Multiplepurposeprofilewithsmoothlineoflight• Suitableforstandard6mm/8mmwideLEDstripes

withhighdensity120leds/m• Availableonstockinanodizedsilvercolor• PossiblelengthandcolorcustomizingatMOQ• Availableonstockwithdedicatedendcapsandmountingbase• Indooruseonly,IP20

APPLICATIONS:

• MultiplepurposesLEDprofilefor6mm/8mmwideLEDstripes• Hotels,cinemas,restaurants,nightclubs,stairLEDlighting• Furnitureproduction• RetailstoresproductsLEDlightingillumination

70

ThisissmallindimensionsLEDprofilewhichisdedicatedforthestandard6mm/8mmLEDstripes.ALU-SWISSprofileisavailablewithchoiceoftwohighQuality,snap-in,UVresistantdiffusers,frosted“LEDsDOTSFREE”andtransparent.WedesignedandmadeforALU-SWISSprofilethesnap-ininstallationbasewhichyouinstaltothesurfacefirstthenjustsnap-intheprofilewiththeLEDs.Smalldimensionsofthisprofilegiveopportunitytouseitinmanyapplications.TheprofilecanbeuseforthekitchencabinetsLEDlighting,retailstoresshelflighting,automotiveormarineboutsdiscreteLEDlightingandetc.Profileisavailablewithrelatedaccessoriessuchasaluminumendcapsandthesnap-inmountingbasewhichhelpsprofessionallyfinishtheprofile.

O

LP-MC-SS (instalationbase)

LP-AL-SS

1

28

20

20

20

23 20

24

250

18 20

11

50

SLIMLINEWIDE20mmSLW2 x 7mm

Architectural Design of minimalistic LED profile dedicatedfor wide LED stripes up to 18mm of wideness. The profilepresents itself not the ordinary design which brings theadditionalvaluetotheArchitecturaldesignattheend.Littlebittbiggerdimensionsallowtoplaceithigheranditwillbestill visible from thedistance,whereotherprofiles from thesameperspectiveofviewmay looksmall.Theextraordinaryanodizing surface quality, dedicated aluminum end capsand LEDsDOTs FREE frosted diffusermake this profile veryattractive to work with. Increased amount of aluminumprovide excellent cooling for all kinds of LED stripesincludinghighpower.Theprofile is able tomaintain stablethetemperatureatloadupto25W/m.TheSLW20iscomingwitchchoiceoftwohighqualityUVresistant,snap-indiffusers(frostedandtransparent)aswellasrelatedaccessoriessuchasaluminumendcapsandmountingclip.

COMING UP

LP-EC-SLW20

LP-AL-SLW20

72

28

23 20

20

20

20

2,60

34 20

5 50

18 20

24

250

RECESSEDSLIMLINEWIDE20mmRSLW ; 4 2 x 7mm

Recess type of the Architectural design of minimalistic LEDprofilededicatedforwideLEDstripesupto18mmofwideness.The profile is dedicated for the insertion into the gypsumceilingorothermaterialaswalls,storeshelfsorwoodfurniture.ThelittlebittbiggerdimensionsoftheRSLW20profileallowtoplaceithigheranditwillbestillvisiblefromthedistance,whereother profiles from the same perspective of view may looksmall. The extraordinary anodizing surface quality, dedicatedaluminumendcapsandLEDsDOTsFREEfrosteddiffusermakethis profile very attractive toworkwith. Increased amount ofaluminumprovideexcellentcoolingforallkindsofLEDstripesincluding high power. The profile is able to maintain stablethe temperature at loadup to 25W/m.The SLW20 is comingwitchchoiceoftwohighqualityUVresistant,snap-indiffusers(frostedandtransparent)aswellasrelatedaccessoriessuchasaluminumendcaps.

COMING UP

LP-EC-RSLW20LP-AL-RSLW20

74

SLW20B WALL INSTALLED LED PROFILESLW2 B 27 4 x mm with the side wall mounting base

FUTURES:

• AluminumBaseforthewallinstalledprofiles• Universalbasecompatibleforthreewallprofiles• Highqualityanodizingsurface• Matchingdesignwiththelightingprofiles

27,90

18,20

23,

80

23,1 22,25

28

R24

1,50

ST2.2x9.5

ST2.2

36 15

8 20

23

80

18 20

27

40

ST2.2ST2.2

ST2.2x9.5

LP-AL-SLW20B-M2/K2

76

LP-BA-SLW20

LP-EC-BA-H2

ItismodificationofthestandardSLW20profile,theprofilenowismodifiedtobeinstalledsidewaystothemountingbaseandthewallwiththelightdirecteddown.Relativelysmalldimensionmakethiswalllamplooksdistinguishandsmall.Cleanminimalisticdesignexpendthelistofpossibleapplication.TheprofileprovidegreatheatsinktotheLEDsandcancontainledstripesupto18mmwide.Extraordinaryqualityofthealuminumanodizingsurface,UVresistantlightdiffusercompletely“LEDsDOTSFREE”makeitthequalityproduct.Lightingprofilecomeswiththechoiceoftwodiffusers,frostedandtransparent.Theprofileandbasearefinishwiththealuminumendcaps.ThebaseandthelightingprofileSLW20Baresaleseparately.

O 0E L

7

step 1 step 2

step 3 step 4

LP-EC-SLW20B LP-EC-BA-H2

PL35ONESIDELIGHTOUTPUT

FUTURES:

• SinglelightoutputWallLEDlampwithhidingbaseforpowersupply• Moderndesignwithallmatchingcomponents• Highstandardofthealuminumanodizingsurface• SnapinLEDsDOTsFREEfrosteddiffuser• Highpowerheatdissipationcapabilityupto30W/m• Firmconnectionofthebasewiththewallandbasewiththeprofile• Aluminumendcaps

31

20

31

35

24

35

39 95

ST2.2x9.5

ST2.2

76 60

35

35 36 60

31

20

31

26 70

31

ST2.2x9.5

ST2.2 ST2 2

LP-AL-PL35S-M2/K2

LP-EC-PL35S-H1

PL S 7 mm x mm with the power supplying hiding base

78

ThisiswallinstalledLEDprofilewithlightdirecteddown.ItismodificationofourpopularPowerLine35profile.Thedesign,diffuserremainthesamelikeatthePL35profile.ThePL35onesidelightdownwasequippedwiththehidingbaseforthepowersupplier.Hidingbaseismatchingtheprofiledesign,ismadefromthealuminumandscrewitdirectlywithtosurface.BaseisconnectedmechanicallywiththelightingprofilebyafewselfthreatscrewsST2,2x9,5mm.AdditionallythebaseandlightingprofileiscomingwiththealuminumendcapsholdsbytwoscrewsST2,2mm.Theprofileandthebaseissaleseparatelyaswellastheendcaps.TheprofileisdedicatedmostlyforthehighpowerLEDlightingwiththepossibleloadupto30W/m.

O

LP-BA-PL35S-M2/K2 LP-AL-PL35S-M2/K2

P G E A L E L M UN

LP-AL-PL35S-M2/K2

step 1

step 2

PL35 TWO SIDE LIGHT OUTPUTPL D mm x mm with the power supplying hiding base

FUTURES:

• TwowayslightoutputoftheWallLEDlampwithhidingbaseforpowersupply• Moderndesignwithallmatchingcomponents• Highstandardofthealuminumanodizingsurface• SanpinfrostedUVresistantdiffuser• Highpowerheatdissipationcapabilityupto30W/m• Firmconnectionofthebasewiththewallandbasewiththeprofile• Aluminumendcaps

39 95

35

31

14

90

35 31

14

90

ST2 2x9.5

ST2.2

36 60

26 70

31

35 76 60

35

31 14

90

31

14

90

ST2 2x9.5

ST2.2

ST2.2

LP-AL-PL35D-M2/K2

LP-EC-PL35D- H1

80

ThisiswallinstalledLEDprofilewithlightdirectedupanddown.ItismodificationofourpopularPowerLine35profile.Thedesign,diffusersremainthesamelikeatthePL35profile.ThePL35twosidelightupanddownwasequippedwiththehidingbaseforthepowersupplier.Hidingbaseismatchingtheprofiledesign,ismadefromthealuminumandscrewitdirectlytothesurface.BaseisconnectedmechanicallywiththelightingprofilebyafewselfthreatscrewsST2,2x9,5mm.Additionallythebaseandlightingprofileiscomingwiththealuminum,endcapsholdsbytwoscrewsST2,2mm.Theprofileandthebaseissaleseparatelyaswellastheendcaps.TheprofileisdedicatedmostlyforthehighpowerLEDlightingwiththepossibleloadupto30W/m.

O P E L E L M UN

LP-BA-PL35D-M2/K2 LP-AL-PL35D-M2/K2

LP-AL-PL35D-M2/K2

81

step 1

step 2

24,

6

20

16,20

4 8

,40

15,

2

ST2.2

ST3.5x9.5

ALU-SQUERELEDPROFILEALU SQUERE 4 x mm with round shaped di fuser

FUTURES:

• Highstandardofthealuminumanodizingsurface• Highquality,snapin,UVresistantdiffuser• LEDsDOTsFREEdesign(frosteddiffuser)• Suitableforledstripesupto16mmofwideness.• DirectinstallationwiththesurfacebyST3,5x9,5mmscrews• Aluminumendcaps

LP-AL-SQ-M2/M1

LP-EC-SQ-H1

82

Threesidelightemitting,snapin,roundshapeddiffuserwithdelicaterifflesunderneedthesurface.

Theprofileiscompletely“LEDsDOTSFREE”andcomeswithfrosted,UVresistantdiffuseronly.Theprofiledeliversoftdiffusedlight,canaccommodatethestandardledstripesmidpowerupto16mmofwideness.TherightselectedaluminumalloybodyisperformingastheheatsinktotheLEDsdeliveringpropercooling.TheprofileisdedicatedforsurfaceinstallationbythestandardST3,5mmselfthreatscrew.TheAlu-Sqereisfinishbythededicatedaluminumendcapsinstalledbythetwoscrewsontheside.Alltogethernicediffuser,qualityaluminumbaseandaluminumendcapsbringthequalityandtheprofessionallook.

O

A SQUA RO O

8

step 1 step 2 step 3 step 4

7

36,6

3x 12,20 2,20

11,

10

44,80

R23

0

ST2.2

SLW10LEDPROFILESLW x 4 mm triple row l d profile

FUTURES:

• Triplerowledstripeprofileupto36,6mm• Slimdesignonly11mmhigh• Threetypessnapinhighquality

UVresistantdiffusers• Highqualityanodizingsurface• Directinstallationwiththesurface

bytheST2,2mmscrews• Aluminumendcaps

84

LP-EC-SLW10-H1

LP-AL-SLW10-M2/K2

Superwidealuminumprofilewiththe36,6mmspacefortheextrawideLEDstripesorthetriplerowofstandard12mmLEDstripes.

ItislowdesignwiththealuminumbodydirectlyscrewingtothesurfacebytheST2,2x9,5mmselfthreatscrews.AlmostflatsnapinUVresistantdiffuserisprovidingqualityfinishtothisLEDlamp.Theprofilesisavailablewiththreedifferenttypesofthelightdiffusers,frosted,50%frostedandtransparent.SLW10LEDprofileisalsoequippedwithstylishaluminumendcapsscrewedwiththeprofile.

O

S 0E I R

8

step 1 step 2 step 3 step 4

27

50

33 8

22 55

WALL LED LAMP ;

FUTURES:

• Decorative modern design Wall LED lamp• Great heat dissipation for high power led stripes up to 30W/m• Two side LED light output• Very fi ne anodizing surface• Matching installation/hiding base for power supply• Aluminum accessories

131

LP-EC-WLL

LP-AL-WLL

86

Decorative wall installed LED profi le with two

direction light outputs up and down. Quality

fi nish and very fi ne anodizing surface give you the

chance to build up LED lamp what you can hang

on in walking areas such as hotel hallways, cinemas,

restaurants, lobby. The lamp can be powered by two

high power singe color or RGB LED stripes. Great

heat dissipation allow to use high power LEDs up

to 30W/m. Installation to the wall is made thru

the installation base which working as the hiding

housing for the power supply. Wall LED Lamp and

the base are sale in 2m units for future cut.

DES IO

LU RE OF E U

step 1 step 2 step 3 step 4

LP-AL-BA

LP-EC-WLL

87