Pg. 2 3 - Veto Pro Pac Home Page · PDF filePg. 2 // RUGGED CONSTRUCTION ... tools accessible,...

VETOPROPAC.COM

Pg. 2

3Pg. 2

// RUGGED CONSTRUCTIONIndustrial strength double nylon

stitching, PVC-impregnated 1800 denier

body fabric, and oversized zippers

// ERGONOMIC DESIGNComfortable, over-molded rubber grip

and folding, hinged handle

// MAXIMIZED STORAGE CAPACITYPatented, sturdy center panel design

for balanced weight distribution and

vertical, tiered tool pockets for

easy identification and access

// MARINE-GRADE RIVETSBuilt to stand up to the rigors of

professional use

// DURABLE WATERPROOF BASE3mm thick polypropylene offers wear

protection and vertical stability

VETO PRO PAC professional-

grade, industrial-strength tool

bags are designed by tradesmen

for tradesmen. By keeping your

tools accessible, organized and

protected, you’re not wasting

time searching for tools. You are

keeping the focus where it should

be—on the work. And that leads

to a GOOD day on the job.

Get a VETO, Get it Done.

TOUGH.DURABLE.FUNCTIONAL.

/ / O V E R V I E W

// 3

Pg. 4

/ / T E C H S E R I E S“Veto’s Tech Pac is second to none in quality and protection! That’s why I own two of them. They allow me especially safe transport of tools while climbing ladders and fewer trips because of their very large capacity. Fewer trips up ladders means a safer job site, and a job done more quickly and efficiently with no compromises. That’s better for me and better for my clients! I’ll never be without a Tech Pac again.” — Matt Mulnix

Bergen Plumbing, Heating, Cooling, Inc. Waterloo, Iowa

// 4

Pg. 4

The Veto Pro Pac Tech Series

offers technicians a better

way to organize their tools

and increase work efficiency.

Whether you’re working on a

small job that requires just a

few tools, or a large job that’s

got you walking long distances

or lugging all your tools up a

ladder, this system of bags is

designed to work together to

solve any jobsite challenges

technicians might face.

/ / T E C H S E R I E S T O O L B A G S A N D B A C K P A C K S

TECH OT-MCTECH-LC TECH-MCTTECH-XLTECH-PAC LTTECH-PAC

NEW2017

// 5

Pg. 6

/ / T E C H S E R I E S

// 6

Pg. 6

The only backpack tool bag that stands upright thanks to its load- centered, non-tipping platform. The TECH-PAC offers hands-free mobility for hand tools, meters, accessories and a small tablet.

56 TIERED POCKETS // 4 STORAGE PLATFORMS

H: 21.5" x L: 14.25" x W: 9.875"

TECH-PAC

// INTERNALLY STORED PULL OUT HOOK

Allows hands-free tool bag

hanging mode for efficient

tool access

// QUICK RELEASE METAL HASP

Enables positive load connection

and ergonomic weight load

distribution, with quick and easy

access to the rear storage bay

// ERGONOMIC PADDED BACKEVA thermo formed panel

offers protection and

carrying comfort


TS //

// FRONT

// BACK

// 7

Pg. 8


// 8

Pg. 8

The TECH-PAC LT offers a stable, non-tipping platform that features tool storage on the front inside bay, and laptop, tablet and office supplies’ storage on the back inside bay. Perfect for service technicians who require tools and technology but need to walk long distances, climb ladders or stairs during their workday.

27 TIERED TOOL POCKETS // 4 STORAGE PLATFORMS

H: 19" x L: 14" x W: 8.5"

TECH-PAC LT


// INTERNALLY STORED PULL OUT HOOK

Allows hands-free tool bag

hanging mode for efficient

tool access

// OVER-MOLDED GRIP Positive, comfortable

connection to tool bag load

// ERGONOMIC PADDED BACKEVA thermo formed panel

offers protection and

carrying comfort

// FRONT// BACK

// 9

Pg. 10

This weatherproof, medium-sized service technician’s tool bag organizes, stores and protects hand tools, meters, a cordless drill and accessories, making service time quicker and efficient.

Built for work and built to last, this is the service technician’s version of the award-winning VETO PRO PAC XL tool bag. The TECH-XL features 80 pockets and plenty of space for hand tools, parts boxes, meters, a cordless impact drill and more.

80 TIERED POCKETS // 14 NEOPRENE POCKETS

H: 20.75" x L: 16.5" x W: 9.5"

TECH-LC TECH-XL53 TIERED POCKETS // 6 ZIPPERED POCKETS

H: 19" x L: 13.5" x W: 9.5"

/ / T E C H S E R I E S T O O L B A G S

// 10

Pg. 10


“ I have had many tool bags during the past 22 years, but the Tech LC bag is by far the best tool bag I have ever owned. It takes a beating, and I love the vertical tool storage. I always recommend this tool bag to guys in my trade”

— Walter Cunningham HVAC Building Maintenance Tech Florida

// 11

Pg. 12


“The taller Tech-MCT with full tape clip holder, outside pockets, neoprene pockets, etc. is ideal for HVAC Techs. This bag is obviously well thought out and designed great and it’s a compact bag with the ability to hold many many tools. I am able to carry everything I need to respond to and service HVAC equipment. Also, it’s able to store 12 inch pump pliers or long screwdrivers. I am definitely a satisfied customer.” — Emin Yakubov

HVAC Technician Brooklyn, NY

TESTO PRODUCTS IN THE TECH MCT:

• 770-3 Hook Clamp Meter • 760-3 Digital Multimeter • 745 Non-Contact AC

Voltage Tester

// 12

Pg. 12

The TECH-MCT is a fully featured, compact tool bag offering 12” of vertical storage space zipped up to accommodate longer shanked tools and meters. With 35 interior pockets and 9 exterior pockets, stainless steel tape clip and electrical tape strap, the TECH-MCT offers maximum tool storage capacity in a compact, durable MC platform.

44 POCKETS OF VARYING SIZE // 2 STORAGE BAYS

H: 14" x L: 10" x W: 8"

TECH-MCT


// 35 INTERIOR TOOL POCKETS For maximum tool storage,

including 2 stretch neoprene

pockets to accommodate

different sized meters

and testers

// ERGONOMIC OVER-MOLDED GRIP

Positive, comfortable

connection to tool

bag load // FRONT

// BACK

// DURABLE WATERPROOF BASE

3mm thick polypropylene

offers wear protection and

vertical stability

// 13

The TECH OT-MC is a compact “open-top” tool bag with an internal plastic “box”, housing a repositionable “insert” box that allows you to customize your storage space options. The TECH OT-MC also features multiple vertical tool pockets for quick & easy access.

48 INTERIOR & EXTERIOR POCKETS // INJECTION MOLDED BOX

H: 11.5" x L: 10" x W: 8" (18” TO TOP OF HANDLE)

TECH OT-MC


// INJECTION MOLDED BOXInterior injection molded plastic

box with smaller re-positionable

“insert” box with lid

// ERGONOMIC OVER-MOLDED GRIP

Positive, comfortable

connection to tool

bag load

// DURABLE WATERPROOF BASE


offers wear protection and

vertical stability

NEW2017

// OUTSIDE MOUNTED STAINLESS STEEL TAPE CLIP

// 14


// 15

Pg. 16

/ / C U S T O M E R P R O F I L E

“ I grew up on a farm, so I was always working with my hands and making repairs with whatever we had available. I liked taking things apart to see how they worked. I decided to go into the HVAC field because it allowed me to solve problems and work with my hands. The prospect of having a different scenery everyday was an added bonus.”

I HAVE BEEN IN THE HEATING AND COOLING INDUSTRY FOR ALMOST 20 YEARS.

SCOT’S VETO BAGS: MC, CT-XL, TP3, TP4, MB, TECH PAC, TECH PAC LT, OT-LC, TECH LC, AND TECH MCT.

—Scot DeckardOwner, Premiere Mechanical

Fort Wayne, Indiana

// 16

Pg. 16

“ I went to school at University of Northwestern Ohio (UNOH) and graduated in 1998, and I have been in the heating and cooling industry since I started college in 1996. I’ve done new home duct work, replacements, and service. I spent several years working in property management which gave me the opportunity to work on a variety of commercial units.

“When I started my HVAC company I did everything myself. Since then I merged my company with another company to create a larger firm and allows me to focus more on the service end. Service appeals to me because I enjoy diagnosing and solving problems.”

“New technology has changed the HVAC industry and requires a new skill set and technical skills. The demand for energy efficient products to combat high energy costs and home automation products is increasing. I like to be on the cutting edge of new technology and new products. I feel it’s my duty to educate my customers and present them with all the options to meet their needs.”

/ / S C O T D E C K A R D

// 17

Pg. 18

Veto Pro Pac’s Tech Series Tool

Pouches offer technicians and

contractors multiple options

to set up for smaller jobs.

The range includes meter

bags, tool pouches and a

small cargo pac that store

meters, diagnostic, repair

and hand tools as well as

small tools and parts.

T O O L P O U C H E S

TP3MB2 TP4 CP4MB

/ / T E C H S E R I E S T O O L P O U C H E S

// 18

Pg. 18


“The TP4 is my essential tool pouch. It contains all the vital tools that I need to quickly gain access to and service the residential HVAC systems that I work on daily. It keeps everything neat, upfront & organized so I have quick availability; and, it also lets me know that I am not leaving tools behind on the job.”

— Scot Deckard Owner, Premiere Mechanical Fort Wayne, Indiana

// 19

Pg. 20

The MB is a compact meter/tool bag. Store your meters and your diagnostic and repair tools, and clip it onto any VETO bag for convenient carrying. The MB also features a detachable rubber handle. An optional shoulder strap is sold separately.

10 VERTICAL TOOL POCKETS // 2 METER POCKETS

H: 13" x L: 8" x W: 3"

10 VERTICAL TOOL POCKETS // 2 METER POCKETS

H: 9" x L: 8" x W: 3"

MB2MB

The MB2 is a taller version of our MB bag and accommodates and protects taller meters, analyzers and repair tools. Features rugged construction, multiple pockets, interior cushioning, and a detachable rubber handle. An optional shoulder strap is sold separately.


// 20

Pg. 20


// 21


// 22

Featuring 15 pockets in a variety of sizes, this compact service technician’s pouch is designed to help get the job done quickly. The TP3 clips onto any VETO tool bag and has a detachable rubber handle. An optional shoulder strap is sold separately.

This is our most versatile service technician’s pouch offering 20 pockets and storage space for meters, diagnostic and repair tools. It easily attaches to any Veto bag, and comes with a detachable rubber handle. An optional shoulder strap is sold separately.

15 VERTICAL TOOL POCKETS // 1 METER POCKET

H: 9.5” x L: 5.5” x W: 4.75”

20 VERTICAL TOOL POCKETS // 1 ELECTRICAL TAPE STRAP

H: 9.5” x L: 7” x W: 4.75”

TP3 TP4


// 23

Pg. 24

// 1.5” D-RING For attachment options

and two-fingered carrying

// BUILT-IN BODY/FINGER GRIPS

// 600 DENIER POLYESTER BODY FABRIC

Reduces wear and tear

C P 4 / / T O O L P O U C H E S

With 4 available storage compartments, the CP4 “Grubber” ™ conveniently holds a variety of small do-dads like: small tools, zip ties, pocket knives, key chains, pens and pencils, power cords, etc. A compact workhorse for all sorts of odds and ends.

W: 3” x H: 6" x L: 10"

CP4 - Cargo Pac (“Grubber” ™)

// 24

Pg. 24


// 25

Pg. 26


// 26

Pg. 26

Veto Pro Pac’s Tech Series

Parts Bags are 4 or 5-PAC

solutions to the clutter

dilemma. Color-coded

storage for small tools,

fasteners, wire nuts &

assorted items. A multi-

purpose parts bag for

jobsite & everyday use.

T O O L P O U C H E S

PB4 (Medium) PB4L (Large)PB5 (Small)

/ / T E C H S E R I E S P A R T S B A G S

NEW2017

NEW2017

NEWlarger

size

// 27

/ / L A P T O P S E R I E S

A pack of 5 see-through PARTS BAGS for organizing and storing small tools, fasteners and assorted items. Color-coded to organize and differentiate as storage system.

5 PARTS BAGS - COLOR-CODED

L: 9" x H: 5.5" EACH INDIVIDUAL PARTS BAG

PB5: 5-PACK (Small)


NEW2017



// REINFORCED SEE-THROUGHSIDE PANEL

Allows for clear visibility

of contents

// METAL SWIVEL HOOK Attaches to Veto Pro Pac

tool bags

// YKK ™ ZIPPERS Heavy duty, continuous

extruded Nylon Thread

// 28


// 29

Pg. 30

A pack of 4 see-through PARTS BAGS for organizing and storing small tools, fasteners and assorted items. Color-coded to organize and differentiate as storage system.


L: 10.5” x H: 7.25" EACH INDIVIDUAL PARTS BAG

PB4: 4-PACK (Medium)


NEWLarger

SIZE





of contents


tool bags



// 30

A larger pack of 4 see-through PARTS BAGS for organizing and storing small tools, fasteners and assorted items. Color-coded to organize and differentiate as storage system.


L: 12" x H: 9" EACH INDIVIDUAL PARTS BAG

PB4L: 4-PACK (Large)


NEW2017





of contents


tool bags



Pg. 30 // 31

Pg. 32

/ / C U S T O M E R P R O F I L E I HAVE BEEN IN THE CONSTRUCTION, PLUMBING AND

HVAC TRADES FOR OVER 17 YEARS.

—Matt MulnixPlumbing, Mechanical, Hydronics Tech

Bergen Plumbing, Heating, Cooling, Inc.Waterloo, Iowa

MATT’S VETO BAGS: CP4, LC , TECH LC, MB2, MB, OT-XXL, XL, MC, TECH PAC, CT-LC, CT-XL, TP3, XXL-F, TECH PAC LT, TECH MCT, PB4, PB4L AND PB5. // 32

Pg. 32

“I have been in the construction trades of plumbing and HVAC for over 17 years and it is one of the most rewarding careers that I can imagine. I have the privilege of helping people with some of their greatest needs and solving their problems. It is an industry that carries with it a great deal of responsibility, and I believe that it really earns us the trust of our valued clients.”

“A large part of giving the kind of quality service that Bergen Plumbing prides itself on is being organized and efficient. Jim, a local electrician that I work with always says, ‘Fight the job not the van!’ and the difference for me is Veto. These are all qualities that we are passing on daily to the next generation of technicians in our industries. I also occasionally do finish carpentry, flooring and tile work which all require quality tools well-maintained and protected.”

/ / M A T T M U L N I X

// 33

Pg. 34TECH PAC LT XLT

The list of items project managers and jobsite managers

need at their disposal is a lengthy one. Laptop or tablet,

camera, safety glasses, calculator… And, need the

tools? The VETO PRO PAC Laptop Series is designed to

accommodate any situation with proper technology and tool

storage, creating a mobile office built for jobsite durability.


The VETO PRO PAC Laptop Series bags are

designed for technicians who carry a wide

variety of tools and use technology (either

a laptop or tablet) as well as managers who

visit jobsites and need a mobile office with

some space for diagnostic tools.


// 34

Pg. 34

The TECH-PAC LT offers a stable, non-tipping platform that features tool storage on the front inside bay, and laptop, tablet and office supplies’ storage on the back inside bay. Perfect for service technicians who require tools and technology but need to walk long distances, climb ladders or stairs during their workday.

A true hybrid laptop tool bag built to accommodate whatever kind of work order is on the books. Store your laptop or tablet, hand tools and meters, digital camera, safety glasses, calculator, and all the accessories that you need to get it done!

27 TIERED TOOL POCKETS // 4 STORAGE PLATFORMS

H: 19” x L: 14” x W: 8.5”

58 TIERED POCKETS // 4 ZIPPERED POCKETS

H: 20.25" x L: 16.5" x W: 9.5"

TECH PAC LT XLT


// 35

Pg. 36


I AM A 2ND GENERATION ELECTRICIAN.

• LC• TECH LC• MC• TP3• XLT• TECH PAC LT• OT-LC• TP4• CP4 • MB• PB4• PB4L • PB5

JOE’S VETO BAGS:

—Joseph Castronovo Jr. Field Foreman, Fire Alarm Division

Sullivan and McLaughlinBoston, Massachusetts

// 36

Pg. 36

“ I started electrical at a very young age working with my father and going to Shawsheen Tech in the electrical program. After high school, I went right out into the field. I got my journeymen license at 20 and my master electrician’s license at 21. By then I was running large construction jobs as a foreman for Suburban Electric. I continued on running electrical jobs for a few years more, in the process I got my builder’s license.”

“I then received an offer from SimplexGrinnell to be a programming and service tech working with fire alarm systems. I worked for Simplex for 5 years and received my NICET level 4 in fire alarm systems. Sullivan and McLaughlin then asked me to be a key part in their fire alarm division start-up (and, by the way, they are now the largest electrical contractor in Massachusetts). I jumped at the opportunity and have been with Sullivan for more than 10 years, and I am currently the Field Foreman for the fire alarm division.”

JOE’S VETO BAGS: / / J O S E P H C A S T R O N O V O J R

// 37

/ / C O N T R A C T O R S E R I E S

// 38


The original VETO PRO PAC

contractor series of closed top bags

includes solutions for carpenters,

electricians and technicians.

Whether you need a small service

bag for troubleshooting, diagnostics

or job specific setups, or you are

working on a major construction

project that requires your entire

arsenal, you will find options for any

work environment or challenge.

C L O S E D T O O L B A G S

XL XXL-FMC LC // 39


“ The MC is the most compact, versatile and accessible tool bag for technicians that I have ever owned.”

— Joseph Castronovo JR SET Fire Alarm Technician Boston, Massachusetts

// 40

The MC is an all-purpose tool bag perfect for job specific setups, offering 10” of vertical storage zipped up. With 15 vertical tool pockets on the front inside and 3 large meter and drill pockets on the back inside, the MC allows technicians and contractors the ability to set up multiple job specific bags that can also feed out of our LC, XL and XXL bags. Grab and go!

20 TIERED POCKETS // 2 STORAGE BAYS

H: 12.5" x L: 10" x W: 8"

// FRONT

// BACK

MC

// OVER-MOLDED GRIP Positive, comfortable

connection to tool

bag load


Heavy duty and durable;

reduces wear and tear

// 3MM THICK WATERPROOF BASE


base offers wear protection

and vertical stability


// 41

Pg. 42

This medium-sized tool bag is designed for technicians and trades-men. It has the versatility to organize, store and protect a variety of hand tools, meters, and more.

This award-winning tool bag is built for any trade but especially popular with electricians, as it holds more than 100 tools. As with all our bags, it is made with tough 1800 denier body fabric and an over-molded rubber, ergonomic grip.


H: 19" x L: 13.5" x W: 9.5"


H: 20.25" x L: 16.5" x W: 9.5"

LC XL

/ / C O N T R A C T O R S E R I E S C L O S E D T O O L B A G S

// 42

Pg. 42

/ / C O N T R A C T O R S E R I E S / / C O N T R A C T O R S E R I E S

“The LC is the perfect size bag for anyone in the trades. It is easy to carry in and out of tight spaces and customer’s homes, and it provides superior protection for all of our tools.” — Jason Harris

Owner, Harris ElectricOwosso, Michigan

// 43

Pg. 44


TO TELL YOU THE TRUTH, I KIND OF FELL INTO BECOMING AN ELECTRICIAN.

—Jason HarrisOwner, Harris Electric LLC

Owosso, Michigan

MY VETO BAGS: LC, XL, XXL-F, TECH-PAC, TP3, TP4, CP4, CT-XL, CT-LC, MC AND TECH MCT.

// 44

Pg. 44

“Growing up, my father was an electrician for a local contractor, and I would go with him on some jobs as a kid and hold the flashlight. After my first year of college, I needed a job, and my father, working for a contractor in the Lansing area, got me a job with his company. I kept going to college, and I also kept working as an electrician. My first couple years in the trade were a good mix of commercial and residential work. ”

/ / J A S O N H A R R I S

“My wife is from the Grand Rapids area, so I ended up relocating there. I got a job working for an electrical contractor that specialized mostly in service work. I found the work challenging; I enjoyed the travel part of the job; and, I felt good about solving problems. Although I can’t say that I had the goal of owning my own business, when we relocated back to my hometown in 2013, I decided to go out on my own and start Harris Electric LLC in November of 2014.” // 45

Pg. 46


This bag is the “soft side” version of the classic carpenter’s wooden tool box. It stores longer tools like hand saws, framing squares, pry bars, framing hammers, etc., in an open bay on one side and smaller hand tool storage in vertical pockets on the other side. Offering ergonomic transportation on and off the jobsite. This bag holds it all!


H: 17" x L: 25.5" x W: 9.5"

XXL-F

// FRONT// BACK

/ / C O N T R A C T O R S E R I E S C L O S E D T O O L B A G S

// 46

Pg. 46

/ / C O N T R A C T O R S E R I E S / / C O N T R A C T O R S E R I E S

// 47

Pg. 48

/ / C O N T R A C T O R S E R I E S O P E N T O P T O O L B A G S

OT-XLOT-LC

The VETO PRO PAC contractor series

of open top bags has the same

sturdy construction and ergonomic

features of the closed top contractor

series but offers quick open top

accessibility and tool storage

convenience. The open top bags

have more space to store larger

tools like cordless drills, extension

cords, caulk guns, pry bars, pipe

wrenches and more.

// 48

Pg. 48

This is the open-top version of the award-winning VETO PRO PAC XL, featuring the same sturdy construction and ergonomic features, but offering internal vertical pockets and open spaces to store larger punch- list items. This is a setup, grab-and-go bag that offers quick open-top accessibility and tool storage convenience.


H: 17" x L: 16.5" x W: 9.5"

OT-XL

This compact version of the OT-XL is an open-top tool bag that holds up to 75 tools and gear like cordless drills, extension cords, caulk guns and anything else that fits. A compact grab-and-go workhorse.


H: 17" x L: 13.5" x W: 9.5"

OT-LC

/ / C O N T R A C T O R S E R I E S O P E N T O P T O O L B A G S

// 49

Pg. 50

/ / C A R G O T O T E S

// 50

Pg. 50 CT-LC CT-XL

The Veto Pro Pac Cargo Tote

Series offers tradesmen the FIRST

series of professional grade wide

mouth tote bags. These rugged

totes provide versatile storage

and carrying solutions for a wide

variety of jobsite situations: A

catch-all bag for raiding the van;

a carry-all bag for end of day

cleanup; and, a more efficient way

to carry bulky tools back and forth

to the jobsite.

Made to stand up to the rigors of daily use, these

totes feature 1800 Denier Body Fabric, leather handle

grips and our signature 3mm polypropylene waterproof

base. Cargo Totes are ideal for hauling large tools and

bulky items, and handy for outdoor activities, everyday

home storage and secondary travel bags.


// 51

Pg. 52

This bag offers bulk carrying capacity with a rugged tote design and Veto Pro Pac’s classic polypropylene weatherproof bottom, which allows quick and easy carrying/storage of bulk items from the truck to the jobsite or anywhere in between. An optional shoulder strap is sold separately.

The CT-XL has 40% more cargo storage than the CT-LC; it offers the ultimate bulk storage and carrying capacity for larger tools and accessories such as hammer drills, extension cords, boots, sawzalls, air hoses or even your pet lab. An optional shoulder strap is sold separately.


H: 14.5" x L: 13.5" x W: 9.5"


H: 16.5" x L: 17" x W: 9.5"

CT-LC CT-XL


// 52

Pg. 52

“ The Cargo Totes have taken on so many uses! At the end of the day, I throw all of the miscellaneous tools in, do a quick carry out and organize the back of the trailer, putting the tools in the proper bags ready for the next assignment!”

— Ed Ridgik General Contractor Ridgik Renovations

/ / W H A T T H E P R O S A R E S A Y I N G

// 53

Pg. 54

Promote your company name/brand and enhance the pride and

professionalism of your employees with our custom logo program.

Your employee’s Veto Pro Pac tool Bag is the first “tool” that a

customer sees, so reinforce your company name/brand and

provide a visual reminder that customers can recall.

Ready to get started? Visit www.vetopropac.com/customlogo!

T O O L P O U C H E S / / C U S T O M L O G O P R O G R A M

VETO’S CUSTOM LOGO PROGRAM

YOUR LOGOGOES HERE!

// 54

Pg. 54

/ / F L E E T S A L E S / E M P L O Y E E R E W A R D S P R O G R A M

As a professional organization that prides itself

on doing high quality work for your customers,

employees are your most important assets.

The fact is, organizations that give regular

thanks to their employees for outstanding

service far outperform companies that do not

recognize the efforts of their employees on a

regular basis.

Veto Pro Pac tool bags are a great way to

reward your employees with best in class tool

bag products that also save time and money.

Visit www.vetopropac.com/fleetsales to get

started!

FLEET SALES/EMPLOYEE REWARDS PROGRAM

// 55

56

©2017 VETO PRO PAC, LLC — Protected by US Patent #6,126,003, #D426,384, #D487,345, #D490,245, and #6,915,902.

WWW.VETOPROPAC.COM

VETO PRO PAC, LLC

P.O. Box 2072 Norwalk, CT 06852

Toll Free: 877.847.1443 // Fax: 203.846.4753

Email: [email protected]

Date post:	14-Mar-2018
Category:	Documents
Upload:	dohanh
View:	222 times
Download:	1 times

Pg. 2 3 - Veto Pro Pac Home Page · PDF filePg. 2 // RUGGED CONSTRUCTION ... tools accessible,...

Documents