Pichler Tools - Promotion 2012-3

9039160

6041715 6148790

90979500

Tel.: +44 1335 368010 • www.pichler-tools.com • [email protected]

Promotion 2012 - 3valid from 01.10.2012 - 31.12.2012

Pichler Tools Ltd. Ednaston Business Centre Hollington Lane Ednaston Ashbourne GB-DE6 [email protected]

Injector removal, cleaning and copper seal remover kit universal for Delphi, Bosch, Siemens

• New with 10 extra brushes for free• For extracting the injector, removing the copper seal and cleaning the injector shaft.• Complete with brass brushes, copper seal remover, slide hammer, etc.

• Perfectly cleaning M10x1 glow plug shafts• Correct tapered size.

Slide hammer 5 kg

• 5 kg slide hammer• Non slip handle• Thread on the shaft M18x1,5• Our classic for powerful

applications

Sensor and ECU test lead set

• Plugs and adapters for ECU testing.• Diagnosis and repair of sensors and the

ECU.• Simple measuring and testing of the

injector.• Airbag/SRS bypass

Glow plug shaft reamer

6056170

60561100

60561200

61135500

9304930

60398250

6595500

60561400

9048760

60561900

60561000

60967050


For the correct removal and refit of the closely spaced box nuts.

• For confined spaces• Slim rounded head• Non slip stop plate

11 mmDrive hex. 6 mm

Drive hex. 8 mm

12 mm

Engine, gearbox sup-port beam

• Universal support beam• Works without any additional

attachments

Crankshaft locking device

• TDC pulley position Mitsubishi kit• 7-piece• In a practical plastic case

Antenna nut sockets

• 5-piece• 3 and 4 prong• 17 mm / square ⅜“

Drive hex. 8 mm

14 mm

Pulley removal tool

• Universal• Including additional adapters

(3x20mm, 3x26mm)• Diameter 70-100 mm

Socket spanners for fuel pipes

10 mmDrive hex. 6mm

17 mmDrive hex. 10 mm

Common rail injector leak back test kit

• 6 single vials• 24 adapters• Tested directly at the injector (multiple adapters)

Drive hex. 10 mm

19 mm

Pipe sealing plug kit universal

• Engine induction pipe test kit• 6 paired sizes• Ø31 - 69 mm• Including safety valve• 13-piece

90417400 9047200

80650000 80125250

90417900

6041650

6041640

6041685


Glow plug dril out kit OM642 M8x1 and thread repair kit

Glow plug dril out kit OM642 M8x1

• Drilling out broken glow plugs M8x1• With thread repair with threaded bushes• Suitable for: MB OM 642 (V6 2.8 L + 3.2 L)

in the C-, E-, M-, R-, S-Class, new Sprinter and Viano

• As above!• Without thread repair kit 6041685

Thread repair kit with 4 bushes

Glow plug universal joint sockets

• Special Glow plug removal kit• Universal joint sockets with ⅜“ square

and 17 mm drive• 160mm long• Output side hex. 8, 9, 10, 12, 14, 16• 2 reamers M10x1, M1, 25x1• extractor

Fuel retriever

• Removal directly from the tank or through the fuel lines possible

• With 2 meter hose and 3 probes (Ø 8, 9.5, 13mm)

• 40 litre capacity• Level indicator• Including grounding cable

Universal glow plug element drilling out and extractor kit - M8x1, M10x1 and M10x1, 25

• Supplement and spare parts for drilling out kit M8x1 OM642 6041640

• Includes 4 spare bushes

Glow plug drilling out kit CDI M10x1

• For drilling out M10x1 glow plugs• 35 piece• Including tread repair kit (8 bushes

and matching tap)

Suction and pressure pump 250 ml

• Aluminium housing with plastic hoses• Suitable for liquids such as diesel, motor oil,

brake fluid, coolant and water

• For glow plugs M8x1, M10x1 and M10x1,25• Fully complete

9560164

9516500

6123001 9174700

61587600 61587700

6098750

9201100 92024500


Strut mount puller VW Polo

• A03 Kit• without pulling arm

Connector release kit universal

• Releases cables simply from plugs• Saves time and money when working

on the on-board electronics• For flat and round connector systems• 23 piece complete in al in aluminium case

Oilfilterwrenchkit

• 30 piece• Universal• Complete in a carrying case

Camber gauge with magnetic base

• Mounted directly on the brake disc, wheel hub or rim

• With adjusting screw for an easy finding of the original strut angle

• Scale range -6 to +6

Distance sleeve universal

• Adjustable spacer with three pairs of interchange-able attachments as a supplement

• Can be used on the vehicle or on the press.

Distance Sleeve HEAVY DUTY

• Adjustable spacer with four reinforced inter-changeable attachments for cars and light commercials

Pressure and vacuum pump

• Rugged metal housing• Easily switchable pressure on vacuum• With scale from -1 to 4 bar• In case with accessories

Socket wrench kit Triple Plus

• 60 pieces• Triple Plus Drive System• Drive Profile: Metric 6 point / E-Torx profile /

12-point (double hex)• ¼ „and ½“ kit

Toolkit Triple Plus

• 115 pieces• Ratchets, sockets, extensions,

articulated joints and lots more.• Special profile „Triple Plus“ with universal combi-

nation possibilities• ¼ „and ½“ Kit

6176930

6175395 61759500

80250000 61479001

9147698 60509600

61801100

9576000


Push and pull sleeve kit

• For cars & truck bushes, bearings, seals etc• 36 piece• 20 press sleeves (34-72 mm)• 4 stepped discs• Spindles and pressure nuts• Suitable for operation with spindle

or press

Bush driving tool MB

• E.g. MB Actros, S-Class, commercial vehicles

• E.g. for bearing 0003238185• For Ø 75mm bushes

(with workshop press)

Tapered roller bearing tool kit for rear trailing arm MB

• Suitable for: MB A-Class

Hydraulic kit 12 tons

• Suitable to our wheel bearing and wheel hub toolkits

• Hand pump, 2 meter high pressure hose, adapter, open core 12t cylinder ram, heavy duty spindle.

Wheel hub puller

• for hubs with 3 -, 4 - and 5-hole pitch• in a case with spindle, adapters,

screws and nuts• Pitch from 98 mm to 139.7 mm

Wheel bearing toolkitVW / Audi / Skoda / Seat

• Suitable for: VW Polo from ‚00 and Fox from ‚05 Audi A2 Skoda Fabia Seat Ibiza from ‚02

Flare nut spanner set

• 8 pieces; hex. 8, 9, 10, 11, 12, 13, 14, 15mm

• 12 point / offset• 6 point / open

Exhaust rubber removal tool

• Damage free, time saving removing of exhaust rubbers

• Undamaged rubbers are reusable

Folding and Flaring tool

• For wheel arch and fender corrections

4223500 4057500

61344510

61388450 6138725 61387550

7352550

9200000

61343300


Brakefluidtester

• Model EBT• 9 volt battery included• Display with boiling point (° C) and water

content (%)

Vacumrefilkitforcooling systems

• Leak testing of the cooling system• Quick refill of cooling system without air locks

Brake bleeding spanner kit

• For Volkswagen, Opel, MB• 11mm short / long• 10mm short / long• With hose and ratchet spanner

Brake calliper rewind kit universal pneumatic

• In a case, 16-piece• Compatible for left & right threads• Universal pneumatic brake piston rewinding tool

Brake calliper rewind kit universal

• To reset brake pistons of disc brakes on almost all cars

• Suitable for both left and right rotating use • 2 basic unit and 15 different inserts• Supplied in a metal box

Brake piston rewinding tool kit VAG

• Specifically for VAG cars• Includes basic device• 7 pieces

Flare nut spanner 55mm

• Open 55mm - 12 point - Drive 3/4 „ drop shape• For unscrewing compression type fittings on

power steering systems, hydraulic and pneumatic control lines and power cylinders.

Refractometer tester for antifreeze and battery

• Model OTC• Antifreeze, winscreen washer and

battery acid test• Range ethylene glycol,

propylene glycol 0 ° to -50 °C• Battery acid from 1.1 to 1.4 g / ml• Focus adjustment on eyepiece• Robust metal housing

Flare nut spanner set

• For loosening rusted brake line fittings• Actuating articulated flare nut spanner 19mm

open• 2 special socket inserts: 11mm and 13mm

8400000

79416800

80305000 9143400

9143300

9001760 9215075

9130020

9130040


Brake disk lathe

• Brake disks milling on the vehicle - perfect milled surface on the disc

• Automatic feed in two directions• Auto Stop

Impact sockets

• ½“ power socket (impact wrench resistant)• With plastic protection inside and outside• Hex. 17, 19, 21, 22 mm

Impact wrench industrial quality

• Pneumatic impact wrench ½“• Torque up to 1600 Nm at 6.2 bar

Slotted nut sockets universal

For outside slotted nuts

For inside slotted nuts

• 11-piece set, 22-75mm• Outer diameter: 22, 26, 30, 33, 37, 44, 50, 56, 63,

69, 75 mm

• For careful removal of slotted nuts• Tightening with torque• For use on bearing bolts etc.• Length 60mm slotted nuts key universal

• Kit 10-piece, 26-88mm• Outer diameter: 26, 31, 34, 38, 42, 50, 58, 75, 82,

88 mm

Grounding device with suction cup

• Provides a galvanic connection without causing scratches or dents

• Ideal for use with spot and point welding machines• Pad diameter: Ø 10cm

Tire valve mounting tool

• Mount tire valves easily and prevents damage to rims

• Overall length: 300mm• With stepped protection rubber

TWIST SOCKET Removal kit

• ½“ □ drive: 22 - 24 - 27 - 32mm• 3/4“ □ drive: 36 - 41mm• Firmly self fastening special profile

• ½“ □ drive: 19 - 25mm

Ideal for removing rounded, damaged or corroded nuts, bolts, rivets and similar

9582800

5260040

6582400

77050500

9571200

9066030

56041500 8044500

9500000

9411000

60442800 9404000

E&OE. Only while stocks last. All prices are valid 01.10.2012 - 31.12.2012, excluding P&P costs, and VAT at the current rate.


Windshield wiper arm pullers set universal

• 11 pieces in plastic case• Universally suitable specially for Opel, VAG, PSA

Flexible grabber

• 56 cm long• LED lamp integrated into the grabber

VAG wiper linkage repair kit

• For cleaning and repairing the wiper linkage

• Includes suitable snap rings (20 pieces)• For e.g. VW Golf 4, Audi A3, Seat, Skoda and

others.

Reversible ratchet setQUICKRELEASE¼“-⅜“-½“

• Switching mechanism for left / right operation• Socket holder with release button on the ratchet

head• □ - drive with ¼ „, ⅜“ and ½“

Windshield repair kit

• For a clean repair of defects in the windshield• Including 230 UV lamp, carbide scriber, mirror,

suction cups, etc.

Torque spanner with fineteeth-36teeth

• Drive ½“• Range of 20Nm - 200Nm• Ratchet with 36 teeth and push through head

Telescopic screwdriver with bit and socket set

• Length 28 to 44cm, extendable• Screwdriver ¼“ 6-pt + adapter ¼“ square 6x Torx,

4x Torx Secure, 4x slot, 4x hex, 6x socket wrench, 5x E-profile socket

• 44-piece, complete in a metal box

Pneumatic cutting grinder

• Cutting disk 100 x 1 x 10mm• Pneumatic extra long angle grinder ¼“• Ultra portable (375 x 65mm)!• Especially for difficult to reach places

Toolbox

• HxWxD 375x685x320mm

• 7 drawers• Removable extra

compartment• Centrally lockable• Sturdy handles

Ratchet lever universal

• ½“ ratchet head, 3 stage adjustable• 670 mm long• max. torque 640 Nm

Battery lifter

• Ideal for particularly hard to grasp batteries

Battery booster

• Strong 22Ah battery for frequent use• 2200A peak current / starting current 700A• For cars and SUVs

Date post:	01-Mar-2016
Category:	Documents
Upload:	bernhard-lammer
View:	225 times
Download:	0 times

Pichler Tools - Promotion 2012-3

Documents