4
Pister multicoupling systems PMK Hydraulic multicoupling systems for all applications
Pister multicoupling systems PMK
Hydraulic multicoupling systemsfor all applications
The advantages of the Pister multicoupling systems
Couples each tool such as:
Demolition Hammer Shaft gripper Multipurpose gripper Diffuser plate Auger Shredders Cone splitter Pruning shears and many more.......
Ease to use:
Tool change in less than 10 seconds
No additional tools are required
No unintentional interchan-ge of couplings
Connect/Disconnect in one step
Toggle lever mechanism for optimal „path-force distribu-tion“
Design:
Robust, modular design Zinc-nickel coating as
corrosion protection Integrated detent kit with
hydraulic locking device Flat sealing couplings Smaller and lighter than
automatic systems
Accessories:
Parking station for tool plate Protective plate for machine
side couplings
Features:
Use of existing tools possible Couple easy, closed safe
even with residual pressure Easy installation possible, no
technician required Couplings of different sizes
in one multi-coupling pos-sible
Various sizes:
Size 1 (0-90 l/min). Size 2 and 3 (0-250 l/min.) Size 4 (0-650 l/min.) Also available in combinati-
on with a drain line
Easy handlingConnect - Uncouple - Protect
Insert tool plate
Pull locking pin and open the system
Close the handle
Change tool plate
The system is closed and the tool is ready for use
Insert protective plate
Mechanics with protective plate Park Station with tool plate
Pister Kugelhähne GmbHVogesenstrasse 37D-76461 MuggensturmGermany
Fon: +49 (0) 72 22 - 50 02 - 0Fax: +49 (0) 72 22 - 50 02 - 50E-Mail: [email protected] Internet: www.pister-gmbh.com
Description
Coupling type
Flow ratel/min. atp 3bar
Flow ratel/min. atp 5bar
max. opera-ting pressure
Range of application for excavator in tons
PMK-13/13-1PMK-13/10/13-1
1
DN 10 coupling50 l/min.
DN 13 coupling90 l/min.
DN 10 coupling75 l/min.
DN 13 coupling125 l/min.
330 bar
2,5 - 8 t*
PMK-20/20-1
All possible variants of 2 and 3
1
DN 13 coupling90 l/min.
DN 20 coupling170 l/min.
DN 13 coupling125 l/min.
DN 20 coupling220 l/min.
330 bar
10 - 16 t*
PMK-20/20-2 with hydraulic lock
All possible variants of 2 and 3
2
DN 13 coupling90 l/min.
DN 20 coupling250 l/min.
DN 13 coupling125 l/min.
DN 20 coupling350 l/min.
450 bar
16 - 30 t*
PMK-25/25-2with hydraulic lock
2
DN 25 coupling650 l/min.
DN 25 coupling800 l/min.
375 bar
ab 30 t*
Technical data of the Pister multicoupling systems
Subject to technical changes * about values : depend on flow and pressure of the machine
100.2
/ 2.1
3 /
PM
K /
E /
1.0
