2
PNEUTORQUE® PTS™ ACCURATE, EFFICIENT, QUIET PNEUMATIC TORQUE TOOLS Part number 07581 | Issue 2 GLOBAL SERVICE Norbar is the only torque equipment manufacturer capable of offering tool and instrument calibraon services to the original factory standard on four connents. Accredited laboratories in Australia, USA, Singapore, China and India operate the same equipment and procedures as the UKAS accredited laboratory within our headquarters in the UK. NORBAR PRODUCT PORTFOLIO Distributed by www.norbar.com © Norbar Torque Tools Ltd 2018 Printed in the UK NORBAR TORQUE TOOLS LTD Wildmere Road, Banbury, Oxfordshire, OX16 3JU UNITED KINGDOM Tel + 44 (0)1295 753600 Email [email protected] NORBAR TORQUE TOOLS 45-47 Raglan Avenue, Edwardstown SA 5039 AUSTRALIA Tel + 61 (0)8 8292 9777 Email [email protected] NORBAR TORQUE TOOLS INC 36400 Biltmore Place, Willoughby Ohio 44094 USA Tel + 1 866 667 2272 Email [email protected] NORBAR TORQUE TOOLS PTE LTD 194 Pandan Loop, #07-20 Pantech Business Hub SINGAPORE 128383 Tel + 65 6841 1371 Email [email protected] NORBAR TORQUE TOOLS (SHANGHAI) LTD 91 Builidng- 7F, No. 1122, North Qinzhou Road, Xuhui District, Shanghai CHINA 201103 Tel + 86 21 6145 0368 Email [email protected] NORBAR TORQUE TOOLS INDIA PVT. LTD Plot No A – 168 Khairne Industrial Area Thane Belapur Road Mahape Navi Mumbai – 400 709 INDIA Tel + 91 22 2778 8480 Email [email protected] ATTACHMENTS & ACCESSORIES A wide range of aachments and accessories make PneuTorques adaptable to many applicaons. Cranked steel reacon plates Double sided reacon plate Single sided reacon plate Right Angle Gearbox The Right Angle Gearbox will provide most ET, PTS™ and PTM tools with a 90˚ angle of operaon, enabling the operator to reach more applicaons where access is restricted and limited Secondary Handle + The secondary handle is an easy to fit and versale accessory which offers addional support and ease of handling when applying torque with Norbar's powered mulpliers *Suitable for use with 80 series only Dual Trigger Module A secondary trigger for use with all PTS™ and PTM tools. This requires the operator to use both hands to run the tool so reduces the risk of hands geng trapped between the reacon bar and reacon point Mul Channel Lubro The Mul Channel Lubro is for users who wish to run their pneumac tools at mulple air pressure sengs, without having to make me consuming adjustments to an air regulator Twin Lubro Control Unit The same features as Norbar's standard filter, regulator, lubricator unit, with addional benefits of two regulators and a switch that allows quick selecon between two air pressure sengs Lubro Control Unit Norbar's standard filter, regulator, lubricator unit features a large, 100mm diameter gauge for easy and accurate seng of air pressure (19286) (19363 & 19448 * ) (180280) (16074) (16075) (60290) Torque Screwdrivers Torque Wrenches Electronic Torque Wrenches Manual Torque Mulpliers Pneumac Torque Tools Electronic Torque Tools Torque Measurement Instruments Torque Transducers Ultrasonic Bolt Measurement Calibraon Services + Not suitable for use with 52 series
