POP#show ip route | section 192.168.0.0
O IA 192.168.0.0/24 [110/138] via 10.7.1.5, 00:05:12, Serial1/1
[110/138] via 10.7.1.1, 00:04:29, Serial1/0
POP#show ip ospf database router 10.0.1.1
… the printout has been shortened …
Routing Bit Set on this LSA
Advertising Router: 10.0.1.1
Link connected to: another Router (point-to-point)
(Link ID) Neighboring Router ID: 10.1.0.3
(Link Data) Router Interface address: 10.7.1.1
TOS 0 Metrics: 65535
Link connected to: a Stub Network
(Link ID) Network/subnet number: 10.7.1.0
(Link Data) Network Mask: 255.255.255.252
TOS 0 Metrics: 64
POP#show ip ospf database summary 192.168.0.0
… the printout has been shortened …
Summary Net Link States (Area 1)
Link State ID: 192.168.0.0 (summary Network Number)
Advertising Router: 10.0.1.1
Network Mask: /24
TOS: 0 Metric: 65545
Link State ID: 192.168.0.0 (summary Network Number)
Advertising Router: 10.0.1.2
Network Mask: /24
TOS: 0 Metric: 74
POP#show ip route | section 192.168.0.0
O IA 192.168.0.0/24 [110/138] via 10.7.1.5, 00:07:56, Serial1/1
event manager applet noReload
event cli pattern "^reload" sync no skip yes occurs 1 period 1
action 1.0 syslog priority informational msg "Reload is disabled"
event manager applet Shutdown
event none
action 1.0 cli command "enable"
action 1.1 cli command "configure terminal"
action 2.0 cli command "router ospf 1"
action 2.1 cli command "max-metric router-lsa"
action 3.0 cli command "event manager applet doReload"
action 3.1 cli command "event timer countdown time 20"
action 3.2 cli command "action 1.0 syslog msg shutting-down"
action 3.3 cli command "action 1.1 reload"
action 4.0 syslog msg "shutdown has been triggered"
X2#shutdown
X2#
%HA_EM-6-LOG: Shutdown: shutdown has been triggered
%SYS-5-CONFIG_I: Configured from console by vty0
%HA_EM-6-FMS_RELOAD_SYSTEM: fh_io_msg: Policy has requested a system
reload; -Process= "EEM Server", ipl= 0, pid= 230
%SYS-5-
RELOAD: Reload requested by EEM. Reload Reason: Embedded Event Manager acti
on.
C1#show ip route | section 192.168.0.0
O 192.168.0.0/24 [110/74] via 10.7.5.2, 00:07:21, Serial1/1
C1#show ip ospf database router 10.0.5.1
… the printout has been shortened …
LS Type: Router Links
Link State ID: 10.0.5.1
AS Boundary Router
Number of Links: 6
… stub links have been removed …
Link connected to: a Transit Network
(Link ID) Designated Router address: 192.168.0.2
(Link Data) Router Interface address: 192.168.0.1
Number of TOS metrics: 0
TOS 0 Metrics: 65535
Link connected to: another Router (point-to-point)
(Link ID) Neighboring Router ID: 10.0.1.2
(Link Data) Router Interface address: 10.7.5.14
Number of TOS metrics: 0
TOS 0 Metrics: 65535
Link connected to: another Router (point-to-point)
(Link ID) Neighboring Router ID: 10.0.1.1
(Link Data) Router Interface address: 10.7.5.2
Number of TOS metrics: 0
TOS 0 Metrics: 65535
C1#show ip route | section 192.168.0.0
O 192.168.0.0/24 [110/84] via 10.0.2.2, 00:00:05, FastEthernet0/0
X1#show running | section router ospf
router ospf 1
log-adjacency-changes
passive-interface FastEthernet0/0
network 0.0.0.0 255.255.255.255 area 0
C1#show ip route | section 192.168.0.0
O 192.168.0.0/24 [110/74] via 10.7.5.2, 00:02:34, Serial1/1
C1#show ip ospf database router 10.0.5.1
… the printout has been shortened …
Link State ID: 10.0.5.1
AS Boundary Router
Number of Links: 6
Link connected to: a Stub Network
(Link ID) Network/subnet number: 192.168.0.0
(Link Data) Network Mask: 255.255.255.0
Number of TOS metrics: 0
TOS 0 Metrics: 65535
… rest of the printout deleted …
C1#show ip route | section 192.168.0.0
O 192.168.0.0/24 [110/84] via 10.0.2.2, 00:06:15, FastEthernet0/0
router ospf 1
log-adjacency-changes
passive-interface FastEthernet0/0
network 0.0.0.0 255.255.255.255 area 0
default-information originate always metric 20 route-map DefaultRoute
!
route-map DefaultRoute permit 10
match ip address prefix-list DefaultSubnet
!
ip prefix-list DefaultSubnet seq 5 permit 172.16.0.0/24
C1#show ip route | section 0.0.0.0/0
O*E2 0.0.0.0/0 [110/20] via 10.7.5.2, 01:09:32, Serial1/1
C1#show ip ospf database external
… the printout has been shortened …
LS Type: AS External Link
Link State ID: 0.0.0.0 (External Network Number)
Advertising Router: 10.0.5.1 (X1)
Network Mask: /0
Metric Type: 2 (Larger than any link state path)
Metric: 20
Forward Address: 0.0.0.0
External Route Tag: 1
LS Type: AS External Link
Link State ID: 0.0.0.0 (External Network Number)
Advertising Router: 10.0.5.2 (X2)
Network Mask: /0
Metric Type: 2 (Larger than any link state path)
Metric: 20
Forward Address: 0.0.0.0
External Route Tag: 1
Listing 18: Default route advertised by X1
C1#show ip ospf database external adv-router 10.0.5.1
… the printout has been shortened …
Link State ID: 0.0.0.0 (External Network Number)
Advertising Router: 10.0.5.1
Network Mask: /0
Metric Type: 2 (Larger than any link state path)
Metric: 16711680