Just get in touch with us!The PRECISE modular system
A Spindle for any application
A customer-specific solution starts with a good consultation. We‘re always glad to provide that to you, whether there at your own facilities or here in our offices in Langenfeld near Düsseldorf, Germany.
PRECISE Technologies GmbHHans-Böckler-Strasse 17 40764 LangenfeldGermanyFon: +49 2173 20535 - 0Fax: +49 2173 20535 - 99E-Mail: [email protected]
The new PRECISE range of spindles has a “three-in-one” bonus.
There are three types of spindle, which can be utilised for various purposes thanks to their differing performance spectra, yet all of them fit into the same design space.
The usefulness of this is plain to see, since there is no need to modify machines to take different types of spindle.
• Identical HSK (hollow taper shaft) interfaces• Identical electrical connections• Identical design space• Compact design• High precision• Performance enhancement (for cutting threads)
Benefits at a glance:
The right spindle for any application
POSSIBLE APPLICATIONS
45.000 rpm0,8 Nm
Asynchronous motor
Block casing1 x TIP sensor
PTC sensor
45.000 rpm1,4 Nm
Asynchronous motor
Block casing3 x TIP sensorsPT100 sensor
45.000 rpm2,0 Nm
Synchronous motor
Block casing4 x TIP sensors
PTC sensor
MOT
OR P
ERFO
RMAN
CE
09/1
4 (P
rinte
d in
Ger
man
y)Su
bjec
t to
tech
nica
l alte
ratio
ns.
Special Features
[rpm] [kW] [Nm] diameterSpindle type Motor type Speed max. Power Torque Tool interface Outer
Technical Data
Dimensions
Power P [kW]Torque M [Nm]
• Asynchronous motor• Automatic tool change• Grease lubricated• Labyrinth air seal• Water cooled
AG100-45-0.8-P-HE25 45.000 2,1 0,8 HSK-E25 100Asynchron
AG100-45-0.8-P-HE25
Power- / Torque diagram AG100-45-0.8-P-HE25
Spindle with tacho feedback - Vector Control Spindle without tacho feedback
Spindle type Motor type Speed max. Power Torque Tool interface Outer [rpm] [kW] [Nm] diameter
Technical Data
Dimensions
Special Features• Synchronous motor• Automatic tool change• Grease lubricated• Labyrinth air seal• Water cooled• Tacho feedback
SG100-45-2-P-HE25 45.000 6,3 2 HSK-E25 100Synchron
SG100-45-2-P-HE25
Power- / Torque diagram SG100-45-2-P-HE25 - Vector ControlPower P [kW]Torque M [Nm]
Spindle type Motor type Speed max. Power Torque Tool interface Outer [rpm] [kW] [Nm] diameter
Technical Data
Dimensions
Special Features
Power P [kW]Torque M [Nm]
• Asynchronous motor• Automatic tool change• Grease lubricated• Labyrinth air seal• Water cooled
AG100-45-1.4-P-HE25 45.000 3,5 1,4 HSK-E25 100Asynchron
AG100-45-1.4-P-HE25
Power- / Torque diagram AG100-45-1.4-P-HE25
Spindle with tacho feedback - Vector Control Spindle without tacho feedback