JC VALVULAS /

Spain

(Western Europe)

Since 1968

TRUELINE

Canada

(North & South

America)

TRUELINE VOSTOK

Eastern Europe & C.I.S.

Oil & Gas, Power, Chemical, Petrochemical, Pulp & Paper , Mine extraction…

Wide range of superior quality products

High level of expertise

High performance goals such as the guarantee

of long life products for severe applications

Customer technical support with our research

& development department

Technical description:

Full and Reduced bore

Floating and Trunnion mounted ball valves

From ½” up to 36” #2500.

Floating BV up to 8” #300.

Soft and Metal seats

ANSI & DIN designs

Motorized ball valves

Special applications:

High temperature

3 ways ball valves

By-pass ball valves

Cryogenic ball valves

Floating BV ASME

3-ways BV

Forged Trunnion mounted BV / Cut drawing

Castings Quality as per ASME B16.34 Mandatory

Appendix I to IV in ASME valves and Severity Levels

S3-V3 to DIN 1690 and EN 10203 in EN-DIN valves

Polished ball Ra 1 in soft seated valves (in metal

seated valves ball is lapped); grinded stem Ra 1.6

Full traceability of shell components, ball and stem

as per EN 10204 3.1

Antistatic device integral with the stem

Viton A, Aflas or Kalrez primary stem seal and

secondary graphite packing

NACE MR.01.75 wetted parts and bolting as Standard

Fire safe as standard construction ISO 10947 : 2004

and API607 : 3rd, 4th, 5th edition

Fugitive emissions EN-ISO 15848-1

SIL 3 (Safety Integrity level 3)

Trunnion mounted BV

GATE VALVES

BOLTED BONNET

from Class 150 up to Class 2500

from 2’’ up to 36’’

PRESSURE SEAL

from Class 900 up to Class 2500

from 2’’ up to 20’’

GLOBE VALVES

BOLTED BONNET

from Class 150 up to Class 2500

from 2’’ up 12’’

PRESSURE SEAL

from Class 900 up to Class 2500

from 2’’ up to 16’’

CHECK VALVES

BOLTED COVER

from Class 150 up to Class 2500

from 2’’ up to 36’’

PRESSURE SEAL

from Class 900 up to Class 2500

from 2’’ up to 20’’

Globe valves

Gate valves

Check valves

Technical description :

From 2 in. up to 48 inches.

Motorized knife gate valves

Design upon customer requests

A unique design and technology

A unique design and highest performance technology

Example of special design KGV: russian project (2011).

Thermal-chemical diffusion a

unique technology to provide the

highest level of performance.

Applications: ball valves, knife gate valves, sleeve bearings, all metal parts.

HT-65 :

- Hardener treatment of austenic steels

- Highly resistant to wear, seizure & corrosion

- Thermally stable up to 550°C / 1060°F

- Thermal-chemical diffusion protects material

from expansion

Hardness

comparison chart

HT-2200

PROPERTIES & APPLICATIONS

Extremely hard surfaces.

Gives longer service life to valve parts.

High abrasive wear and oxidation resistant

properties.

Thermally stable up to 870 °C/1600 °F.

Applications: ball valves, knife gate valves, sleeve bearings, all metal parts.

OTHER TECHNOLOGIES PROPOSED

Non metallic seats as an alternative of

metal seated valves:

Our seats are non-porous as are Teflon

based seats.

True-Hard 66 : up to 425°F/ +218°C

True-Therm 99: up to 625°F /+343°C

G.E. CASE STUDY

Needs: safety automatic BV (trunnion mounted) with pneumatic control / failed close.

Environment: High temperature & G.E. Gas turbins

Results: we designed special actuated valves and made specific tests to assure long life guarantee

and no leakage; 15.000 cycles at high temperature (810°F/432°C). Leakage tests were even better

then ANSI Class VI requirements.

We have been qualified by G.E. and specifications for all Gas Turbins are based on our approved high

technology.

PALL FILTRATION

Gas filtration specialist.

Needs: an automatic BV- fast opening less than 500ms (Blow back system)

Environment: gas treatment plants

Solutions found by TRUELINE: Opposed piston type but with 4 pistons types construction

+external tubings + special solenoid mounting

Results: we reached an opening time of less than 300ms with 3.5bar air supply.

We can know also propose metal/metal design for high temperature and TH-66 seats.

Test results: 15.000

cycles @810°F.

Main agreements & Oil and Gas customers:

SHELL Tests & MESC qualified

.R.G.B. (Belgium Gas) /nD.G. (Danish Gas) /nD.V.G.W. (German Gas)

ARAMCO Vendor Listed

ENAGAS, S.A. (Spain) nGas Natural SDG, S.A. (Spain)

Chevron Philipps

Dragon Oil (Turkmenistan)

DetNorskeVeritasAS (Norway)

EXXON (+ Kvaerner) ( North Sea)

General Electric

Czech Republic (Brno Institute)

Abu Dhabi Gas Liquefaction Company Ltd. (ADGAS)

Abu Dhabi National Oil Company (ADNOC)

TAKREER

TOTAL-ELF Group

Kuwait National Petroleum Company (KNPC)

Kuwait Oil Company (KOC)

PetróleoBrasileiro, S.A. (Petrobras)

Petróleosde Venezuela, S.A. (PDVSA)

Petroleum Development Oman (PDO)

Qatar General Petroleum Corporation (QGPC)

Repsol-YPF Group

Texaco

Gaz de France (North sea)…

JC Quality Assurance System

ISO 9001 : 2000 certified by BVQI API Q1 certified by the AMERICAN - PETROLEUM INSTITUTE PED 97 / 23 / EC certified by BVQI

Products Approvals

API 6D certified by the AMERICAN - PETROLEUM INSTITUTE CE Marking (Module H, Category III) in accordance with PED 97 / 23 / EC certified by BVQI Fire Safe ISO 10947 : 2004 certified by SGS API 607 3rd., 4th. and 5th. Edition certified by SGS BS 6755 Part 2 certified by Lloyd’s Register and SGS RUSSIAN CERTIFICATES: GOST R & Rostekhnadzor SIL 3 (Safety integrity level) Atex EN 13774

Environmental Certifications

ISO 14001 : 2004 certified by BVQI ISO-EN 15848-1 certified by SGS

TRUELINE VOSTOK

54, Bis boulevard Jean-Baptiste LEBAS

59000 LILLE / France

http://www.truelinevostok.com

Sales area manager: Arianne Asselineau

Mobile: +336 14 02 62 88

Chief Engineer: Vincent Dalmagne

Office: +336 09 77 25 46