Date post: | 02-Jul-2019 |
Category: |
Documents |
Upload: | vuongtuyen |
View: | 217 times |
Download: | 0 times |
PRECISION BOOM HEIGHT CONTROL
4 5.
WWW.NORAC.CA
Precision DefineD sPraying refineD
2016 Parts BookBoom Height Control Systems
Effective Date: October 1, 2015
Effective October 1, 2015 ~ Printed in CanadaRevision A.
Table of Contents
UC5™ Boom Height Control UC5™ Display Kits ................................................................................................................................................... 2 NORAC Approved Virtual Terminals and Displays .............................................................................................3 UC5™ Display Parts .................................................................................................................................................4 UC5™ Options.......................................................................................................................................................... 6 UC5™ Service Parts...............................................................................................................................................12 UC5™ Service Tools ...............................................................................................................................................13 UC5™ Common Parts ..........................................................................................................................................14 UC5™SprayerSpecificElectricalParts .............................................................................................................17
UC4.5™ Boom Height Control UC4.5™ Options ....................................................................................................................................................22 UC4.5™ Service Tools ...........................................................................................................................................26 UC4.5™ Common Parts .......................................................................................................................................28 UC4.5™SprayerSpecificElectricalParts ..........................................................................................................30
UC4+™ Boom Height Control UC4+™ Kits – Discontinued ...............................................................................................................................34 UC4+™ Options .....................................................................................................................................................35 UC4+™ Service Parts ............................................................................................................................................38 UC4+™ Service Tools ............................................................................................................................................39 UC4+™ Common Parts ........................................................................................................................................40 Hydraulic Components (UC5™, UC4.5™ and UC4+™) Hydraulic Parts – Current Models ......................................................................................................................42 Hydraulic Parts – Discontinued ...........................................................................................................................44 Open Center Compensated Proportional Valve Block ...................................................................................46 Active Roll™ ............................................................................................................................................................47 Active Wing Roll™ ..................................................................................................................................................48 Roll Position Cylinder and Roll Position Damper ............................................................................................49 Recharge Kit for Hydraulic Cylinder ...................................................................................................................49 Additional Hydraulic Parts .....................................................................................................................................50
Other Statement of Limited Warranty ............................................................................................................................51 Extended Warranty Packages ................................................................................................................................51
2 PRECISION BOOM HEIGHT CONTROL
WWW.NORAC.CA
NORAC’s most advanced Boom Height Control System. Compatible with a variety of virtual terminals.
UC5™ Control Types
Levels of Control
Wing Control Main Lift Control
Description Control FunctionOn/Off Valves
Proportional Valves
Slant Control™
N/A Standard
NORAC’s Slant Control™ system automatically controls the main lift and slant of the sprayers center section. It compensates for side hills and slopes to maintain a pre-set height above the ground or crop.
Standard Control™
x Optional
NORAC’s Standard Control™ system is intended for booms up to 90’ and for use in less challenging terrain. The system automatically controls wing lift using the sprayer’s existing on/off valves to maintain a pre-set height above the ground or crop.
Passive Roll™ x Standard
NORAC’s Passive Roll™ system automatically measures and compensates for roll in the center section while controlling wing lift independently. The system prevents one boom’s action from affecting the other while maintaining a pre-set height above the ground or crop.
Active Roll™ x Standard
NORAC’s Active Roll™ system automatically measures and controls the roll of the center section while controlling the wing lift and main lift independently. By rotating and controlling the center section, wing lift speeds are increased and spray height is maintained even in the most severe conditions.
Active Wing Roll™
x Standard
NORAC’s Active Wing Roll™ system automatically controls the wing lift and main lift independently while hydraulically linking the left and right wings to simulate roll. Isolating the chassis movement from the boom allows for more precise control in challenging terrain.
1PRECISION BOOM HEIGHT CONTROL
UC5™ Kits UC
5™ K
itsUC5™ Boom Height Control
NORAC PULSE™ Display
UC5™isNORAC’smostadvancedBoomHeightControlSystem.Thiscontroller is ISOBUScertifiedandcanbe integratedwithavariety of virtual terminals and displays (as shown on page 5). Alternatively it can be used as a stand-alone system that is operated through NORAC’s PULSE™ color touchscreen display. In addition to Crop Mode™ and Soil Mode™, operators will enjoy the patented Hybrid Mode™ technology. The UC5™ system is not only easy to operate, but offers advanced troubleshooting and diagnostic capabilities.
Although kit content varies by the level of control, commonly supplied components include:
• Left and right wing ultrasonic sensors with mounting brackets• Center ultrasonic sensor with bracket• Roll Sensor(s) or Position Sensors to measure center section roll• Proportional valve package (load sensing, closed center or open center models available)• Custom designed cables and hydraulics• Customized installation manual for most sprayer models• Operator’s Manual
2 PRECISION BOOM HEIGHT CONTROL
WWW.NORAC.CA
UC5™ Display Kits
ECHO-DT1 ECHO™ Display Terminal Kit
The NORAC PULSE™ display offers a stand-alone option for the UC5™ Boom Height Control system. The PULSE™ offers new functionality, user friendly diagnostics, and an easy to use color touchscreen. This stand-alone display is compact and minimizes cab clutter.
NORAC ECHO™ Display
UC
5™
Dis
play
Kit
s
Kit Number Description Price
ECHO-DT1L ECHO™ Refurbished Display Terminal Kit for UC5™ Boom Height Control system for Self Propelled Sprayers
43700L ECHO™ Display Panel with Power Switch Loaner
105421 Ram-B-101U Unpkd Ram Mount w/2 Ram-B-202 Bases
106586 ECHO™ Recovery Kit - 2 SD Cards
Kit Number Description Price
PULSE-PT01 PULSE™ Display Terminal Kit for UC5™ Boom Height Control system for Pull Type Sprayers
PULSE-SP01 PULSE™ Display Terminal Kit for UC5™ Boom Height Control system for Self-Propelled Sprayers
PULSE™
ECHO™ – Discontinued
NORAC PULSE™ Display
PULSE-PT01 PULSE™ Display Terminal Kit
3PRECISION BOOM HEIGHT CONTROL
UC5™ Boom Height ControlU
C5™
VT
/Display
Cable K
its
Kit Number Description Price
54VT-GS2-PT01 Cable Kit for John Deere GS™2 1800 and 2600 and GS™3 2630 (All John Deere Tractors with GS™2 and GS™3 Displays)
54VT-GS2-PT02 Cable Kit for John Deere GS™2 1800 and 2600 and GS™3 2630 (All European Trailed Sprayers)
54VT-GS2-SP01 Cable Kit for John Deere GS™2 1800 and 2600 and GS™3 2630 (All John Deere Self Propelled, Except 4630)
54VT-GS2-SP02 Cable Kit for John Deere GS™2 1800 and 2600 and GS™3 2630 (John Deere 4630)
54VT-GS2-SP03 Cable Kit for John Deere GS™2 1800 and 2600 and GS™3 2630 (John Deere R4030 and R4038)
54VT-IV-SP01 Cable Kit for IntelliView™ IV on New Holland Guardian Sprayers
54VT-OB-MAX Cable Kit for Outback MAX™ (Self Propelled and Pull Type Sprayers)
54VT-PRO-PT01* Cable Kit for Case AFS PRO 300, 600 and 700 and New Holland IntelliView™ II, III and IV (All Case and New Holland ISOBUS ready tractors)
54VT-PRO-SP01 Cable Kit for Case AFS PRO 300, 600 and 700 on Case Self Propelled Sprayers
54VT-RV-VP4 Cable Kit for Raven Viper® 4(Self Propelled and Pull Type Sprayers)
54VT-TB-FMX Cable Kit for Trimble FmX® & TMX-2050™ (Self Propelled and Pull Type Sprayers)
54VT-TC-X30 Cable Kit for Topcon X25 & X30 (Self Propelled and Pull Type Sprayers)
54VT-TJ-570 Cable Kit for TeeJet® Matrix 570VT & Aeros 9040 (not compatible with the Matrix 570G) (Self Propelled and Pull Type Sprayers)
Ag Leader® Cable Kits and Displays – Available from Ag Leader®
NORAC Approved Virtual Terminals and Displays
Part Number Description Price
43260-17 Cable, UC5™ Interface CANbus Mueller VT
43260-19 Cable, UC5™ Interface IBICUsed to connect UC5™ control module to the ISOBUS (9 pin) connector on back of tractor.
NORAC’s UC5™ Boom Height Control System is ISOBUS certified and can beoperated through a virtual terminal and other compatible displays. NORAC approved virtual terminals and compatible displays are shown here.
Please contact NORAC to inquire about compatibility with other virtual terminals and displays.
Virtual Terminal and Display Cable Kits
ISOBUS Interface Cables
* Check product manuals for alternate cables before ordering.
Topcon X30
Kverneland Group
IsoMatch Tellus
Ag Leader® VERSATM
Ag Leader® InSightTM
AFS Pro 700/IntelliViewTM
Plus lV
MuellerTOUCH800®
John Deere Command
CenterTM
Raven Viper® 4RoGator
Management Center
Kverneland Group Tellus
Trimble® FmX®
John Deere GSTM2
Ag Leader® INTEGRATM
AFS Pro 300/IntelliViewTM lV
FendtVarioterminal
Mueller TOUCH1200®
TeeJet®
Matrix®
570VT
John Deere GSTM3
OutbackMAXTM
Ag Leader® EDGETM
AFS Pro 600/IntelliViewTM
Plus ll
MuellerCOMFORT
TeeJet®
Aeros 9040
ISA 360
Trimble® TMX-2050TM
Topcon X25
4 PRECISION BOOM HEIGHT CONTROL
WWW.NORAC.CAU
C5™
D
ispl
ay P
arts
Kit Number Part Number Model - Description Price
54VT-GS2-PT01
43240-26 Cable, UC5™ Interface Switch Box
43260-02 Cable, UC5™ Interface CANBus VT John Deere GS2/GS3
44602-01 Box Switch UC5™ Remote Hand Control
54VT-GS2-PT02
43240-26 Cable, UC5™ Interface Switch Box
43260-08 Cable, UC5™ Interface CANBus 4 Pin DT
44602-01 Box Switch UC5™ Remote Hand Control
54VT-GS2-SP01
43240-26 Cable, UC5™ Interface Switch Box
43260-02 Cable, UC5™ Interface CANBus VT John Deere GS2/GS3
44602-01 Box Switch UC5™ Remote Hand Control
54VT-GS2-SP02
43240-26 Cable, UC5™ Interface Switch Box
43260-08 Cable, UC5™ Interface CANBus 4 Pin DT
44602-01 Box Switch UC5™ Remote Hand Control
54VT-GS2-SP03
43240-26 Cable, UC5™ Interface Switch Box
43260-32 Cable, UC5™ Interface CANBus VT JD R40XX
44602-01 Box Switch UC5™ Remote Hand Control
54VT-IV-SP01
43240-26 Cable, UC5™ Interface Switch Box
43250-10 Cable, UC5™ Network Power Jumper
43260-31 Cable, UC5™ Interface HD 16 9 Pin to 6 Pin DT
44602-01 Box Switch UC5™ Remote Hand Control
54VT-OB-MAX
43240-26 Cable, UC5™ Interface Switch Box
43260-29 Cable, UC5™ Interface DT 4 Pin 12 inch Stub
44602-01 Box Switch UC5™ Remote Hand Control
UC5™ Display Parts
5PRECISION BOOM HEIGHT CONTROL
UC5™ Boom Height Control
Kit Number Part Number Model - Description Price
54VT-PRO-PT01
43240-26 Cable, UC5™ Interface Switch Box
43260-08 Cable, UC5™ Interface CANBus 4 Pin DT
44602-01 Box Switch UC5™ Remote Hand Control
54VT-PRO-SP01
43240-26 Cable, UC5™ Interface Switch Box
43250-14 Cable, UC5™ Battery 2 Pin DT Fused (ECU and Signal Power)
43260-07 Cable, UC5™ Interface CANBus 3 Pin DT J1939
44602-01 Box Switch UC5™ Remote Hand Control
54VT-RV-VP4
43240-26 Cable, UC5™ Interface Switch Box
43260-33 Cable, UC5™ Interface 7 Pin Circular
44602-01 Box Switch UC5™ Remote Hand Control
54VT-TB-FMX
43240-26 Cable, UC5™ Interface Switch Box
43260-30 Cable, UC5™ Interface DTM 4 Pin 12 inch Stub
44602-01 Box Switch UC5™ Remote Hand Control
54VT-TC-X30
43240-26 Cable, UC5™ Interface Switch Box
43260-08 Cable, UC5™ Interface CANBus 4 Pin DT
44602-01 Box Switch UC5™ Remote Hand Control
54VT-TJ-570
43240-26 Cable, UC5™ Interface Switch Box
43260-21 Cable, UC5™ Interface Tee Jet Matrix 570
44602-01 Box Switch UC5™ Remote Hand Control
UC
5™
Display Parts
6 PRECISION BOOM HEIGHT CONTROL
WWW.NORAC.CA
Severe Terrain – Replacement Parts
Kit Number Description Price
5465BC Severe Terrain Option with Break-Away Brackets (May be used with most UC5™ and UC4.5™ Kits)
5465BC-LP SevereTerrainOptionwithLowProfileBrackets(MaybeusedwithmostUC5™andUC4.5™Kits)
5465BC-JD Severe Terrain Option with Break-Away Brackets (May be used with all John Deere Kits)
5465BC-JD-LP SevereTerrainOptionwithLowProfileBrackets(MaybeusedwithallJohnDeereKits)
5465BC-AP-LP SevereTerrainOptionwithLowProfileBrackets(MaybeusedwithallApacheKits)
5465BC-SM Severe Terrain Option with Summers Bracket (May be used with all Summers Ultra Ultimate Sprayers, not shown)
All packages include: Two ultrasonic sensors with two mounting brackets and all required cables & hardware.
Item Number
Part Number
Description Price
B10 44728 Mounting Bracket, Complete UC5™ Break-Away Extended
44695-11 Nitro/Hagie Mounting Bracket, Break-Away Adapter UC5™ Sensor
105415 JohnDeereClampRound2”SSforBreak-AwayandLowProfileBrackets
44729 Nitro Mounting Bracket, Universal Spring Break-Away
B20 44971 Bracket,LowProfileShortFlange
44734 Summers Ultra Ultimate Sensor Bracket
44747 Spacer, 2” Square Tubing 8”
C06 43210-10 Cable, UC5™ Network 18 AWG 10M
E05 43750 UC5™ Ultrasonic Sensor
E10 43760 UC5™ Network Coupler 3-Way
UC5™ Options
By installing this option an operator adds a second sensor to each wing. This sensor is normally mounted half way down the length of the boom and provides additional boom protection in severe terrain. This option is helpful in any one or a combination of the following situations:
• Boom lengths longer than 90 ft. (27 m) • Land with sharp knolls such as terraces • Spraying in fall crop where there are thin or lodged areas
5465BC [and 5465BC-JD] Severe Terrain with Break-Away Brackets 5465BC-[AP-LP/LP/JD-LP]SevereTerrainwithLowProfileBrackets
Severe Terrain
UC
5™ O
ptio
ns
7PRECISION BOOM HEIGHT CONTROL
UC5™ Options
5468BC UC5™ Enhanced Stability Option
5468BC-MAX UC5™ MAX™ Sensing Option
Enhanced StabilitySome boommovements, such as sprayer flex, are difficult for thestandard system to measure. This option adds the ability to measure more of the boom movements (roll in two places), providing a more accurate representation of boom position, therefore improving system performance. This will be most useful on trapeze booms and isonlyavailableforspecificsprayermodels.
MAX™ Sensing
Enhanced Stability – Replacement Parts
Kit Number Description Price
5468BC UC5™ Enhanced Stability Option*(May be used with trapeze style booms to increase boom stability)Package Includes: One roll sensor with all the required cables & hardware.
* Enhanced Stability can only be used with Version 2 Roll Sensors (part number 43741).
Kit Number Description Price
5468BC-MAX UC5™ MAX™ Sensing Option* (Before ordering, please contact NORAC to inquire about compatibility.) Package Includes: Two MAX Sensors and the required cables and hardware.
* Inner Ultrasonic Sensor Mounting Brackets will be required for installation and can be purchased seperately. See Mounting Bracket and Hardware Options on page 11.
Please Note: UC5™ControlModulefirmwarewillrequireanupdateiflowerthan4.8.1.5,contactyourNORACAccountManagerfor further details.
Item Number
Part Number
Description Price
C03 43220-01 Cable, UC5™ Network 14 AWG 1M
C04 43220-03 Cable, UC5™ Network 14 AWG 3M
E04 43741 UC5™ Roll Sensor Version 2
E10 43760 UC5™ Network Coupler 3-Way
E12 43764 UC5™ Network Coupler 2-Way
MAX™ Sensing – Replacement Parts
Item Number
Part Number
Description Price
E07 50100 MAX™ Sensor
P03 105882 UC5™ Network 6 Pin Plug
UC5™ Boom Height Control
This option utilizes NORAC’s MAX™ Sensors to improve system performance.
UC
5™ O
ptions
8 PRECISION BOOM HEIGHT CONTROL
WWW.NORAC.CA
Active Wing Roll™ – Replacement Parts
Item Number
Part Number
Description Price
C02 43220-01 Cable, UC5™ Network 14 AWG 1M(3’)
C10 43230-04 Cable, UC5™ Valve 2PIN Deutsch to 2PIN Deutsch
E12 43764 UC5™ Network Coupler 2-Way
44745 BRACKET WRC JD R-SERIES
44746 BRACKET WRC CS
44748 BRACKET WRC NT
E06 45030 UC5™ Position Sensor with Standard Hardware
45032-1 Mounting Bracket, Position Sensor VI
E07 50100 Max™ Sensor
105882 UC5™ Network 6 Pin Plug
Active Wing Roll™
Kit Number Description Price
5466BC-AP Active Wing Roll™ Option for Apache Sprayers (Year 2010+)*
5466BC-CS Active Wing Roll™ Option for Case IH 20, 30 and 40 Series Sprayers*
5466BC-JD-R Active Wing Roll™ Option for John Deere R4030, R4038 and R4045 Sprayers
5466BC-NT Active Wing Roll™ Option for Miller Nitro 4000 and 5000 Series Sprayers and New Holland Front Mount Boom*
5466BC-RG Active Wing Roll™ Option for RoGator Sprayers 900, 1100 and 1300* * Inner ultrasonic sensor mounting brackets will be required for installation and can be purchased seperately. See Mounting Bracket and Hardware Options on page 11. Please Note: UC5™ControlModulefirmwarewillrequireanupdateiflowerthan4.8.1.5,contactyourNORACAccountManagerfor further details.
5466BC - [AP/CS/NT/RG] Active Wing Roll™ Option 5466BC-JD-R Active Wing Roll™ Option for John Deere
The addition of NORAC’s Active Wing Roll™ to a UC5™ Boom Height Control system enables the sprayer to go over severe terrain. It uses an Active Wing Roll™ cylinder to hydraulically link the left and right wings, simulating roll. This isolates the chassis movement from the boom allowing for more precise control even in the most severe conditions. This technology can be applied to a variety of sprayer center section designs including center pivot, pendulum, trapez and rigid booms.
UC
5™ O
ptio
ns
9PRECISION BOOM HEIGHT CONTROL
UC
5™ O
ptionsUC5™ Boom Height Control
Item Number
Part Number
Description Price
C06 43220-10 Cable, UC5™ Network 14 AWG 10M (33’)
E10 43760 UC5™ Network Coupler 3-Way
B10 44728 Mounting Bracket, Complete UC5™ Break-Away
B10 44729 Mounting Bracket, Complete UC5™ Nitro Break-Away
44747 Spacer, 2” Square Tubing 8”
B20 44971 MountingBracket,LowProfileShortFlange
Mounting Bracket Hardware Options
Mounting Bracket and Hardware Options – Replacement Parts
Kit Number Description Price
5464BC-BA Bracket and Hardware Option with Break-Away Brackets (May be used with 5466BC-RG)
5464BC-LP BracketandHardwareOptionwithLowProfileBrackets(Maybeusedwith5466BC-CS)
5464BC-AP-LP BracketandHardwareOptionwithLowProfileBrackets(Maybeusedwith5466BC-AP)
5464BC-NT Bracket and Hardware Option with Nitro Break-Away Brackets (May be used with 5466BC-NT) All packages include: Two brackets and all required cables & hardware.
5464BC-BA Bracket and Hardware Option with Break-Away Brackets
5464BC-[LP/AP-LP]BracketandHardwareOptionwithLowProfileBrackets
5464BC-NT Bracket and Hardware Option with Nitro Break-Away Brackets
Select Active Wing Roll™ and MAX™ Sensing options require the addition of inner ultrasonic sensor mounting brackets.
10 PRECISION BOOM HEIGHT CONTROL
WWW.NORAC.CAU
C5™
Opt
ions
The addition of NORAC’s patented Active Roll™ to the UC5™ Boom Height Control systems enable the sprayer to go over severe terrain by rolling the center section, as well as controlling wing lift and main lift height. Rotating and controlling the center section also increases the wing lift speed. Spray height is maintained, even in the most severe conditions.
Kit Number Description Price
5467BC-4B Active Roll™ for John Deere 4700 and 4800 Series Sprayers. Compatible with 44963D and 44960D. Currently available for packages UC5-BC-JD07 and UC5-BC-JD08.Package Includes: Valve assembly, roll cylinder and all required cables, hoses & hardware.
5467BC-4B-JD10 Active Roll™ for John Deere 4930 and 4940 Sprayers. Compatible with 44963D and 44960D. Package Includes: Valve assembly, roll cylinder and all required cables, hoses & hardware.
5467BC-JD Active Roll™ Position Sensor Upgrade Kit for John Deere 4700 and 4800 Series Sprayers.Replaces rods with position sensor for improved measurement of the boom and eliminate the potentialforrodstobecomemisalignedinthefield.Package Includes: Roll cylinder with internal sensing position sensor and all required cables & mounting brackets.
UC5™ Options
5467BC-4B Active Roll™ for John Deere 4700 and 4800 Series Sprayers
5467BC-4B-JD10 Active Roll™ for John Deere 4930 and 4940 Sprayers
Active Roll™
5467BC-JD Active Roll™ Position Sensor Upgrade Kit for John Deere Sprayers
11PRECISION BOOM HEIGHT CONTROL
UC5™ Boom Height ControlU
C5™
Options
Active Roll™ – Replacement Parts (Excluding Hydraulics)
Item Number
Part Number
Description Price
B09 45032-1 Mounting Bracket, Position Sensor V1
B10 44695-21 Pin Active Roll JD Upper Mounting Kit
B25 44760 Mounting Bracket, Linear Roll JD 4920
C04 43220-01 Cable, UC5™ Network 14AWG 1M
C10 43230-04 Cable, UC5™ Valve 2 pin DT to 2 pin DT
E06 45030 UC5™ Position Sensor without Hardware
E12 43764 UC5™ Network Coupler 2-Way
UC5™ Options
Note – Hydraulic Parts start on page 46
12 PRECISION BOOM HEIGHT CONTROL
WWW.NORAC.CAU
C5™
Ser
vice
Par
ts
UC5™ Service Parts
Part Number Description Price
44645-02 Transducer Service Kit (Includes 6 transducers)*
44645-03 Sensor O-Ring Service Kit (Includes 6 silicone O-Rings)*
106285 Hydraulic Filter Element 3000PSI 10 Micron Long End Cap
45020 Ultrasonic Sensor Velcro Field Update Kit (Updates one sensor)
105739 Vibration Mount
106489 Seal, Blue Front for Molded Deutsch 6 Pin Connector
* Requires a NORAC resource kit.
Service Replacement Parts
Kit Number Description Price
UC5-BC-SER UC5™ Boom Height Control Service KitThis kit includes common parts that NORAC recommends all dealers stock.
Part Number Description Quantity
104409 Foam Disc 45 PPI Conductive 1/2 X 2-3/4 Dia 12
43210-20 Cable, UC5™ Network 18 Awg 20m 1
43220-10 Cable, UC5™ Network 14 Awg 10m 1
43741 UC5™ Roll Sensor Version 2 1
43750 UC5™ Ultrasonic Sensor 2
43760 UC5™ Network Coupler 3-Way 1
43764 UC5™ Network Coupler 2-Way 1
43764T UC5™ Network Coupler 2-Way With Terminator (White) 2
43765 UC5™ Network Coupler 8-Way 1
13PRECISION BOOM HEIGHT CONTROL
UC
5™ Service Tools
UC5™ Boom Height Control
UC5™ Service Tools
Kit Number Description Price
54645 UC4+™ Resource Kit Upgrade to UC5™This kit is used to upgrade the UC4+™ Boom Height Control Resource Kit (part # 44645) to calibrate and test UC5™ sensors.
Part Number Description Quantity
43764T UC5™ Network Coupler 2-Way With Terminator (White) 1
44644-08 Cable, BUS Monitor UC5™ Adapter 1
54733 NORACToolsuiteandVerificationToolUSBDrive 1
Kit Number Description Price
54646 UC5™ Resource Kit with PEAK Bus Monitor This kit includes the tools and spare parts required for updating UC5™ software and calibrating/testing UC5™ sensors.
Part Number Description Quantity
106127 ADH RTV 162 White Silicone - 85ml Tube 1
106359 CANbus Monitor (Peak PCAN-USB) 1
43250-12 Cable, UC5™ Battery Pigtail Fused (ECU and Signal Power) 1
43764T UC5™ Network Coupler 2-Way With Terminator (White) 1
44644-11 Cable, Bus Monitor Peak PCAN Tee (Male and Female DT) 1
44645-02 Transducer Service Kit 1
44645-03 O-Ring Service Kit 2
44645-04 Foam Disc Service Kit 1
44968 Ultrasonic Sensor Calibration Fixture Type 2 1
54733 NORACToolsuiteandVerificationToolUSBDrive 1
Kit Number Description Price
54647 UC5™ Updating and Verification Tool KitThis kit includes a PEAK CANbus monitor and the software required for using NORAC’s VerificationToolwhichisusedtoensureproperinstallationandsettingsofUC4.5™andUC5™. Also enables software downloads on UC5™ modules and sensors.
Part Number Description Quantity
106359 PEAK PCAN-USB CANbus Monitor 1
44644-11 Cable, PEAK CANbus Monitor UC5™ Interface 1
43220-0.5 Cable, UC5™ Network 14AWG 0.5M 2
43250-10 Cable, UC5™ Network Power Jumper 1
43760 UC5™ Network Coupler 3-Way 1
43764T UC5™ Network Coupler 2-Way With Terminator (White) 1
54733 NORACToolsuiteandVerificationToolUSBDrive 1
14 PRECISION BOOM HEIGHT CONTROL
WWW.NORAC.CA
UC5™ Common Parts
UC
5™
Com
mon
Par
ts
15PRECISION BOOM HEIGHT CONTROL
UC5™ Boom Height Control
Common Parts
UC
5™
Com
mon Parts
Item Number
Part Number
Description Price
43708 UC5™ Mounting Bracket Kit (Control and Input Modules)
44724 Bracket, Break-Away Spacer 2 inch with Bolts
B10 44728 Mounting Bracket, Complete UC5™ Break-Away
B11 44743 Mounting Bracket, Universal Mount
B17 44972 MountingBracket,LowProfileRainflap
B20 44971 MountingBracket,LowProfileShortFlange
B21 44973 MountingBracket,LowProfileLongFlange
44973-02 MountingBracket,LowProfileLargeFlangeTallClamp
44706-01 Cable Tie Kit Black 10 pcs 21 inch, 150 pcs 7.5 inch
C01 43220-0.5 Cable, UC5™ Network 14 AWG 0.5M (1.6’)
43220-01 Cable, UC5™ Network 14 AWG 1M (3’)
43220-03 Cable, UC5™ Network 14 AWG 3M (10’)
43220-05 Cable, UC5™ Network 14 AWG 5M (16’)
43220-07 Cable, UC5™ Network 14 AWG 7M (23’)
43220-10 Cable, UC5™ Network 14 AWG 10M (33’)
43220-15 Cable, UC5™ Network 14 AWG 15M (50’)
C02 43210-10 Cable, UC5™ Network 18 AWG 10M (33’)
43210-15 Cable, UC5™ Network 18 AWG 15M (50’)
43210-20 Cable, UC5™ Network 18 AWG 20M (65’)
43210-25 Cable, UC5™ Network 18 AWG 25M (82’)
C10 43230-04 Cable, UC5™ Valve 2PIN Deutsch to 2PIN Deutsch
C20 43240-17 Cable, UC5™ Interface Tilt Pigtail Version
C21 43240-18 Cable, UC5™ Interface Main Pigtail Version
C30 43250-04 Cable, UC5™ Battery AMP Fused
43250-06 Cable, UC5™ Battery Pigtail Fused
43250-12 Cable, UC5™ Battery Pigtail Fused (ECU and Signal Power)
43250-16 Cable, UC5™ Battery 6 Pin DT (ECU and Signal Power)
D01 43800 UC5™ PULSE™ Display Panel (Cables Not Included)
E01 43710 UC5™ Controller Module
E02 43720 UC5™ Valve Module
E03 43732 UC5™ Input Module Pass Thru
E04 43741 UC5™ Roll Sensor Version 2 (Current Model)*
44732 Mounting Bracket, UC5™ Roll Sensor
44733 Mounting Bracket, UC5™ Roll Sensor Trapeze Link Plate
43741RB UC5™ Roll Sensor Version 2 Rebuilt*
E05 43750 UC5™ Ultrasonic Sensor
50100 MAX™ Sensor
104409 Foam Disc 45 PPI Conductive
101050 Nut Metric Hex SS M8
102126 Washer Lock Spring SS 5/16 IN
43750RB UC5™ Ultrasonic Sensor Rebuilt
* 43740 Roll Sensors can not be paired with 43741 Roll Sensors. Refer to NORAC Technical Bulletin #11-05 for more information.
16 PRECISION BOOM HEIGHT CONTROL
WWW.NORAC.CAU
C5™
C
omm
on P
arts
Common Parts
E06 45035-1 UC5™ Position Sensor with Standard Hardware
45030 UC5™ Position Sensor without Hardware
45032-1 Mounting Bracket, Position Sensor V1
43760 UC5™ Network Coupler 3-Way
E11 43765 UC5™ Network Coupler 8-Way
E12 43764 UC5™ Network Coupler 2-Way
E20 43764T UC5™ Network Coupler 2-Way With Terminator (White)
P01 106034 UC5™ Network 2 Pin Plug
P02 106602 UC5™ Network 12 Pin Plug (A-Key) DT
P03 105882 UC5™ Network 6 Pin Plug
Note – Hydraulic Parts start on page 46
Item Number
Part Number
Description Price
17PRECISION BOOM HEIGHT CONTROL
UC
5™ Sprayer
Specific Electrical
UC5™ Sprayer Specific Electrical Parts
Kit Number Part Number Model - Description Price
Apache
UC5-BC-AP02
43240-10 Cable, UC5™ Interface Main GP (240 inch)
43240-13 Cable, UC5™ Interface Tilt GP (Weatherpack)
43250-04 Cable, UC5™ Battery AMP Fused
UC5-BC-AP03 / AP03A
43240-01 Cable, UC5™ Interface Tilt DT
43240-22 Cable, UC5™ Interface Main DT (240 inch)
43250-04 Cable, UC5™ Battery AMP Fused
Case
UC5-BC-CS01 / CS02
43240-10 Cable, UC5™ Interface Main GP (240 inch)
43240-13 Cable, UC5™ Interface Tilt GP (Weatherpack)
43250-04 Cable, UC5™ Battery AMP Fused
UC5-BC-CS03 / CS05 / CS05A
43240-01 Cable, UC5™ Interface Tilt DT
43240-22 Cable, UC5™ Interface Main DT (240 inch)
43250-04 Cable, UC5™ Battery AMP Fused
Fast
UC5-BC-FT03
43240-01 Cable, UC5™ Interface Tilt DT
43240-07 Cable, UC5™ Interface Main DT (with AUX 1 & 2)
Flexi-Coil
UC5-BC-FC02
43240-01 Cable, UC5™ Interface Tilt DT
43240-07 Cable, UC5™ Interface Main DT (with AUX 1 & 2)
GVM
UC5-BC-GV01
43240-01 Cable, UC5™ Interface Tilt DT
43240-07 Cable, UC5™ Interface Main DT (with AUX 1 & 2)
43250-09 Cable, UC5™ Battery GP Tee Fused
HARDI
UC5-BC-HD07 / HD12
43240-08 Cable, UC5™ Interface Tilt Amp (Superseal)
43240-09 Cable, UC5™ Interface Main Amp (Superseal 240 inch W/ Bypass)
UC5™ Boom Height Control
18 PRECISION BOOM HEIGHT CONTROL
WWW.NORAC.CA
Kit Number Part Number Model - Description Price
HARDI
UC5-BC-HD08A
43240-30 Cable, UC5™ Interface HARDI DAH09
43240-34 Cable, UC5™ Interface HARDI DAH09 TF Adapter
John Deere
UC5-BC-JD06
43240-19 Cable, UC5™ Interface Tilt John Deere (4920, 4930)
43240-20 Cable, UC5™ Interface Main John Deere (4920, 4930)
43250-07 Cable, UC5™ Battery John Deere Fused
UC5-BC-JD07 / JD07A / JD08 / JD08A
43240-05 Cable, UC5™ Interface Main John Deere
43240-06 Cable, UC5™ Interface Tilt John Deere
43250-07 Cable, UC5™ Battery John Deere Fused
UC5-BC-JD10 / JD10A
43240-19 Cable, UC5™ Interface Tilt John Deere (4920, 4930)
43240-20 Cable, UC5™ Interface Main John Deere (4920, 4930)
43250-07 Cable, UC5™ Battery John Deere Fused
UC5-BC-JD11
43240-05 Cable, UC5™ Interface Main John Deere
43240-06 Cable, UC5™ Interface Tilt John Deere
43250-04 Cable, UC5™ Battery AMP Fused
UC5-BC-JD12 / JD12A
43240-38 Cable, UC5™ Interface John Deere R4030 H038 ML
43240-41 Cable, UC5™ Interface Tilt DT R4038
43250-07 Cable, UC5™ Battery John Deere Fused
Miller Condor
UC5-BC-MC01
43240-39 Cable, UC5™ Interface Main Metripack (Reversed Polarity)
43240-40 Cable, UC5™ Interface Tilt Metripack (Reversed Polarity)
UC5-BC-MC02
43240-13 Cable, UC5™ Interface Tilt GP (Weatherpack)
43240-14 Cable, UC5™ Interface Main GP (Weatherpack)
Nitro
UC5-BC-NT04 / NT04A
43240-21 Cable, UC5™ Interface Main MP (Nitro)
43240-25 Cable, UC5™ Interface Tilt MP (Nitro)
43250-04 Cable, UC5™ Battery AMP Fused
43250-07 Cable, UC5™ Battery John Deere Fused
UC
5™ S
pray
erSp
ecifi
c E
lect
rica
l
19PRECISION BOOM HEIGHT CONTROL
UC5™ Boom Height ControlU
C5™
SprayerSpecific E
lectrical
Kit Number Part Number Model - Description Price
Redball
UC5-BC-RB01
43240-13 Cable, UC5™ Interface Tilt GP (Weatherpack)
43240-14 Cable, UC5™ Interface Main GP (Weatherpack)
RoGator
UC5-BC-RG04 / RG05 / RG06 / RG07
43240-01 Cable, UC5™ Interface Tilt DT
43240-07 Cable, UC5™ Interface Main DT (with AUX 1 & 2)
43250-04 Cable, UC5™ Battery AMP Fused
Spra-Coupe
UC5-BC-SC01 / SC02
43240-01 Cable, UC5™ Interface Tilt DT
43240-07 Cable, UC5™ Interface Main DT (with AUX 1 & 2)
43250-04 Cable, UC5™ Battery AMP Fused
Summers
UC5-BC-SM05
43240-01 Cable, UC5™ Interface Tilt DT
43240-07 Cable, UC5™ Interface Main DT (with AUX 1 & 2)
Top Air
UC5-BC-TA01
43240-01 Cable, UC5™ Interface Tilt DT
43240-07 Cable, UC5™ Interface Main DT (with AUX 1 & 2)
Versatile
UC5-BC-VS01
43240-01 Cable, UC5™ Interface Tilt DT
43240-07 Cable, UC5™ Interface Main DT (with AUX 1 & 2)
43250-04 Cable, UC5™ Battery AMP Fused
Walker
UC5-BC-WK01
43240-01 Cable, UC5™ Interface Tilt DT
43240-07 Cable, UC5™ Interface Main DT (with AUX 1 & 2)
43250-04 Cable, UC5™ Battery AMP Fused
20 PRECISION BOOM HEIGHT CONTROL
WWW.NORAC.CA
NORAC’s entry level Boom Height Control System. Kits come complete with a stand-alone digital Control Panel.
UC4.5™ Control Types
Levels of Control
Wing Control Main Lift Control
Description Control FunctionOn/Off Valves
Proportional Valves
Slant Control™
N/A Standard
NORAC’s Slant Control™ system automatically controls the main lift and slant of the sprayers center section. It compensates for side hills and slopes to maintain a pre-set height above the ground or crop.
Standard Control™
x Optional
NORAC’s Standard Control™ system is intended for booms up to 90’ and for use in less challenging terrain. The system automatically controls wing lift using the sprayer’s existing on/off valves to maintain a pre-set height above the ground or crop.
Passive Roll™ x Optional
NORAC’s Passive Roll™ system automatically measures and compensates for roll in the center section while controlling wing lift independently. The system prevents one boom’s action from affecting the other while maintaining a pre-set height above the ground or crop.
Active Roll™ x Optional
NORAC’s Active Roll™ system automatically measures and controls the roll of the center section while controlling the wing lift and main lift independently. By rotating and controlling the center section, wing lift speeds are increased and spray height is maintained even in the most severe conditions.
Active Wing Roll™
x Optional
NORAC’s Active Wing Roll™ system automatically controls the wing lift and main lift independently while hydraulically linking the left and right wings to simulate roll. Isolating the chassis movement from the boom allows for more precise control in challenging terrain.
4 5.
21PRECISION BOOM HEIGHT CONTROL
UC4.5™ Kits UC
4.5™ K
itsUC4.5™ Boom Height Control
UC4.5™ is NORAC’s entry level Boom Height Control System. It comes complete with a stand-alone digital control panel that offers the same user interface and menu structure as UC4+™. In addition to Crop Mode™ and Soil Mode™, operators will enjoy the patented Hybrid Mode™ technology. Depending on the level of control, most kits will provide automatic control of sprayer boom wings, but Main Lift control is sold seperately.
All kits contain UC5™ sensors and network cables. Although kit content varies by the level of control, commonly supplied components include:
• Control panel with mounting bracket• Left and right wing ultrasonic sensors with mounting brackets• Roll Sensor(s) or Position Sensors to measure center section roll• Proportional valve package (load sensing, closed center or open center models available)• Custom designed cables and hydraulics• Customized installation manual for most sprayer models• Operator’s Manual
22 PRECISION BOOM HEIGHT CONTROL
WWW.NORAC.CA
Kit Number Price
4570BC
Compatible Spray Height Control Kits:
UC4.5-BC-FC1 UC4.5-BC-RG4
UC4.5-BC-FC2 UC4.5-BC-RG5
UC4.5-BC-HD7 UC4.5-BC-RG6
UC4.5-BC-HD12 UC4.5-BC-RG7
UC4.5-BC-JD6 UC4.5-BC-RH1
UC4.5-BC-MC1 UC4.5-BC-SC2
UC4.5-BC-MC2 UC4.5-BC-SM2
UC4.5-BC-MS1 UC4.5-BC-TA1
UC4.5-BC-RG2 UC4.5-BC-VS1
Main Lift Control Replacement Parts
Main Lift Control Option
This option can be added to UC4.5™ Kits to provide Main Lift Height Control. Kits include Main Lift Ultrasonic Sensor, cables and brackets.
Kit Number Price
4571BC
Compatible Spray Height Control Kits:
UC4.5-BC-CS1
UC4.5-BC-CS2
UC4.5-BC-CS3
UC4.5-BC-GN1
UC4.5-BC-GN6
UC4.5-BC-JD7
UC4.5-BC-SS1
Item Number
Part Number
Description Price
B11 44743 Mounting Bracket, Universal Mount
B21 44973 MountingBracket,LowProfileLongFlange
C07 43220-01 Cable, UC5™ Network 14 AWG 1M
E05 43750 UC5™ Ultrasonic Sensor
E12 43764 UC5™ Network Coupler 2-Way
4571BC Main Lift Control Option
UC4.5™ Options
UC
4.5™
Opt
ions
Kit Number Description Price
4575BC Main Lift Control Option for Fast Sprayers
4570BC Main Lift Control Option
Kit Number Description Price
4570BC-HD Main Lift Control Option for HARDI Standard Control™
23PRECISION BOOM HEIGHT CONTROL
UC
4.5™ O
ptions
Severe Terrain – Replacement Parts
Kit Number Description Price
5465BC Severe Terrain Option with Break-Away Brackets (May be used with most UC5™ and UC4.5™ Kits)
5465BC-AP-LP SevereTerrainOptionwithLowProfileBrackets(MaybeusedwithallApacheKits)
5465BC-LP SevereTerrainOptionwithLowProfileBrackets(MaybeusedwithmostUC5™andUC4.5™Kits)
5465BC-JD Severe Terrain Option with Break-Away Brackets (May be used with all John Deere Kits)
5465BC-JD-LP SevereTerrainOptionwithLowProfileBrackets(MaybeusedwithallJohnDeereKits)
5465BC-NT Severe Terrain Option with Break-Away Brackets (May be used with all Nitro Kits, not shown)
5465BC-SM Severe Terrain Option with Summers Bracket (May be used with all Summers Ultra Ultimate Sprayers, not shown)
All packages include: Two ultrasonic sensors with two mounting brackets and all required cables & hardware.
Item Number
Part Number
Description Price
B10 44728 Mounting Bracket, Complete UC5™ Break-Away Extended
44695-11 Nitro/Hagie Mounting Bracket, Break-Away Adapter UC5™ Sensor
105415 JohnDeereClampRound2inchSSforBreak-AwayandLowProfileBrackets
44729 Nitro Mounting Bracket, Universal Spring Break-Away
B20 44971 Bracket,LowProfileShortFlange
44734 Summers Ultra Ultimate Sensor Bracket
44747 Spacer 2 IN Square Tubing 8 IN
C06 43210-10 Cable, UC5™ Network 18 AWG 10M
E05 43750 UC5™ Ultrasonic Sensor
E10 43760 UC5™ Network Coupler 3-Way
By installing this option an operator adds a second sensor to each wing. This sensor is normally mounted half way down the length of the boom and provides additional boom protection in severe terrain. This option is helpful in any one or a combination of the following situations:
• Boom lengths longer than 90 ft. (27 m) • Land with sharp knolls such as terraces • Spraying in fall crop where there are thin or lodged areas
5465BC [and 5465BC-JD] Severe Terrain with Break-Away Brackets 5465BC-[AP-LP/LP/JD-LP]SevereTerrainwithLowProfileBrackets
Severe Terrain
UC4.5™ Boom Height Control
UC4.5™ Options
24 PRECISION BOOM HEIGHT CONTROL
WWW.NORAC.CA U
C4.
5™ O
ptio
ns
4568BC UC4.5™ Enhanced Stability Option
UC4.5™ Options
Someboommovements,suchasboomflex,aredifficultforthestandard system to measure. This option adds the ability to measure more of the boom movements (roll in two places), providing a more accurate representation of boom position, therefore improving system performance. This will be most usefulontrapezeboomsandisonlyavailableforspecificsprayermodels.
Enhanced Stability – Replacement Parts
Kit Number Description Price
4568BC UC4.5™ Enhanced Stability Option*(May be used with some trapeze style booms to increase boom stability)Package Includes: One roll sensor with all the required cables & hardware.
* Enhanced Stability can only be used with Version 2 Roll Sensors (part number 43741).
Item Number
Part Number
Description Price
C07 43220-01 Cable, UC5™ Network 14 AWG 1M
C08 43220-03 Cable, UC5™ Network 14 AWG 3M
E04 43741 UC5™ Roll Sensor Version 2
E10 43760 UC5™ Network Coupler 3-Way
E12 43764 UC5™ Network Coupler 2-Way
Enhanced Stability
25PRECISION BOOM HEIGHT CONTROL
UC
4.5™ O
ptionsUC4.5™ Boom Height Control
The addition of NORAC’s patented Active Roll™ to the UC4.5™ Boom Height Control systems enable the sprayer to go over severe terrain by rolling the center section, as well as controlling wing lift. Spray height is maintained, even in the most severe conditions. Rotating and controlling the center section also increases the wing lift speed.
Active Roll™ – Replacement Parts (Excluding Hydraulics)Note – Hydraulic Parts start on page 46
Kit Number Description Price
4567BC Active Roll™ for John Deere 4730 and 4830 Sprayers. Compatible with 44963D and 44960D. Package includes: Valve assembly, internal sensing position sensor and required cables & mounting brackets.
Item Number
Part Number
Description Price
B09 45032-1 Mounting Bracket, Position Sensor V1
B10 44695-21 Pin Active Roll JD Upper Mounting Kit
C04 43220-0.5 Cable, UC5™ Network 14AWG 0.5M
C70 44658-08D Cable, Valve Roll Bias DT
E06 45030 UC5™ Position Sensor without Hardware
E12 43764 UC5™ Network Coupler 2-Way
UC4.5™ Options
Active Roll™
4567BC Active Roll™ for John Deere 4730 and 4830 Sprayers
26 PRECISION BOOM HEIGHT CONTROL
WWW.NORAC.CAU
C4.
5™
Serv
ice
Tool
s
UC4.5™ Service Tools
Kit Number Description Price
45010 UC4.5™ / UC4+™ Boom Height Control Panel Programming KitThis kit includes the required tools and software for updating UC4.5™ and UC4+™ panels.
Part Number Description Quantity
44649 UC4+™ Panel Programmer 1
54733 NORACToolsuiteandVerificationToolUSBDrive 1
Kit Number Description Price
64645 UC5™ / UC4.5™/ UC4+™ Verification Tool KitThis kit includes a PEAK CANbus monitor and the software required for using NORAC’s VerificationToolwhich isusedtoensureproper installationandsettingsofUC5™,UC4.5™and UC4+™.
Part Number Description Quantity
106359 PEAK PCAN-USB CANbus Monitor 1
44644-08 Cable, Bus Monitor (DT Female to AMP Male) 1
44644-11 Cable, PEAK CANbus Monitor UC5™ Tee Male and Female DT 1
44644-12 Cable, Bus Monitor (DT Male to AMP Female) 1
54733 NORACToolsuiteandVerificationToolUSBDrive 1
27PRECISION BOOM HEIGHT CONTROL
UC
4.5™
Service ToolsUC4.5™ Boom Height Control
Kit Number Description Price
54647 UC5™ Updating and Verification Tool KitThis kit includes a PEAK CANbus monitor and the software required for using NORAC’s VerificationToolwhichisusedtoensureproperinstallationandsettingsofUC4.5™andUC5™. Also enables software downloads on UC5™ modules and sensors.
Part Number Description Quantity
106359 PEAK PCAN-USB CANbus Monitor 1
44644-11 Cable, PEAK CANbus Monitor UC5™ Tee Male and Female DT 1
43220-0.5 Cable, UC5™ Network 14AWG 0.5M 2
43250-10 Cable, UC5™ Network Power Jumper 1
43760 UC5™ Network Coupler 3-Way 1
43764T UC5™ Network Coupler 2-Way With Terminator (White) 1
54733 NORACToolsuiteandVerificationToolUSBDrive 1
UC4.5™ Service Tools
28 PRECISION BOOM HEIGHT CONTROL
WWW.NORAC.CA
UC4.5™ Common Parts
Common Parts
Item Number
Part Number
Description Price
43708 UC5™ Mounting Bracket Kit (Control and Input Modules)
44724 Bracket, Break-Away Spacer 2 inch with Bolts
B10 44728 Mounting Bracket, Complete UC5™ Break-Away
B11 44743 Mounting Bracket, Universal Mount
B17 44972 MountingBracket,LowProfileRainflap
B20 44971 MountingBracket,LowProfileShortFlange
B21 44973 MountingBracket,LowProfileLongFlange
44973-02 MountingBracket,LowProfileLargeFlangeTallClamp
44706-01 Cable Tie Kit Black 10 pcs 21 inch, 150 pcs 7.5 inch
UC
4.5™
C
omm
on P
arts
29PRECISION BOOM HEIGHT CONTROL
Common Parts
Item Number
Part Number
Description Price
C03 44656D Cable, Valve Variable Rate
43220-0.5 Cable, UC5™ Network 14 AWG 0.5M (1.6’)
43220-01 Cable, UC5™ Network 14 AWG 1M (3’)
43220-03 Cable, UC5™ Network 14 AWG 3M (10’)
43220-05 Cable, UC5™ Network 14 AWG 5M (16’)
43220-07 Cable, UC5™ Network 14 AWG 7M (23’)
43220-10 Cable, UC5™ Network 14 AWG 10M (33’)
43220-15 Cable, UC5™ Network 14 AWG 15M (50’)
C05 43210-10 Cable, UC5™ Network 18 AWG 10M (33’)
43210-15 Cable, UC5™ Network 18 AWG 15M (50’)
43210-20 Cable, UC5™ Network 18 AWG 20M (65’)
43210-25 Cable, UC5™ Network 18 AWG 25M (82’)
C10 44650-50 Cable, UC4.5™ Power Generic Self-Propelled
44650-51 Cable, UC4.5™ Power Generic Pull Type
C11 44651-50 Cable, Generic Valve Extension
C12 44658-35 Cable, UC4+™ Interface Generic
C13 44658-36 Cable, UC4+™ Interface Wings Generic
C30 43250-04 Cable, UC5™ Battery AMP Fused
43250-06 Cable, UC5™ Battery Pigtail Version Fused
E01 45100 UC4.5™ Spray Boom Control Panel
E03 43742 UC5™ Roll Sensor with Temperature Probe
E04 43741 UC5™ Roll Sensor Version 2 (Current Model)
44732 Mounting Bracket, UC5™ Roll Sensor
44733 Mounting Bracket, UC5™ Roll Sensor Trapeze Link Plate
E05 43750 UC5™ Ultrasonic Sensor
50100 MAX™ Sensor
104409 Foam Disc 45 PPI Conductive
101050 Nut Metric Hex SS M8
102126 Washer Lock Spring SS 5/16 IN
43750RB UC5™ Ultrasonic Sensor Rebuilt
45035-1 UC5™ Position Sensor with Standard Hardware
45030 UC5™ Position Sensor without Hardware
45032-1 Mounting Bracket,Position Sensor V1
E10 43760 UC5™ Network Coupler 3-Way
E11 43765 UC5™ Network Coupler 8-Way
E12 43764 UC5™ Network Coupler 2-Way
E20 43764T UC5™ Network Coupler 2-Way With Terminator (White)
P03 105882 UC5™ Network 6 Pin Plug
UC
4.5™
Com
mon Parts
UC4.5™ Boom Height Control
Note – Hydraulic Parts start on page 46
30 PRECISION BOOM HEIGHT CONTROL
WWW.NORAC.CA
UC4.5™ Sprayer Specific Electrical Parts
UC
4.5™
Spr
ayer
Spe
cific
Ele
ctri
cal
Kit Number Part Number Model - Description Price
Apache
UC4.5-BC-AP3
44658-90 Cable, UC4+™ Sense AP3
44658-91 Cable, UC4+™ Valve AP3 Main
Bestway
UC4.5-BC-RH1
44658-117 Cable, UC4.5™ Main Lift Directional
Case
UC4.5-BC-CS1
44658-21 Cable, UC4+™ Interface GP All
44658-40 Cable, UC4+™ Interface GP Main Extension
UC4.5-BC-CS2
43250-04 Cable, UC5™ Battery AMP Fused
44658-21 Cable, UC4+™ Interface GP All
44658-34 Cable, UC4+™ Interface Bypass RoGator 854 ‘98 and Older
44658-40 Cable, UC4+™ Interface GP Main Extension
UC4.5-BC-CS3
43250-04 Cable, UC5™ Battery AMP Fused
44658-24 Cable, UC4+™ Interface Power Pigtail
44658-47 Cable, UC4+™ Interface DT2 Main Extension
44658-72 Cable, UC4+™ Interface Roll Sense DT
UC4.5-BC-CS5
43250-04 Cable, UC5™ Battery AMP Fused
44658-24 Cable, UC4+™ Interface Power Pigtail
44658-46D Cable, UC4+™ Valve Roll with Pigtail
44658-47 Cable, UC4+™ Interface DT2 Main Extension
44658-62 Cable, UC4+™ Interface Valve CS4
44658-72 Cable, UC4+™ Interface Roll Sense DT
FAST
UC4.5-BC-FT3
44658-19 Cable, Interface FT1 Main
44658-20 Cable, Interface FT1 Wings
UC4.5-BC-FT4
44658-91 Cable, Valve AP3 Main
44658-113 Cable, UC4.5™ Interface Fast SC
Flexi-Coil
UC4.5-BC-FC1
44650-53 Cable, UC4.5™ Power for Flexi-Coil 67 Series
44653-10 Cable, UC4.5™ Adapter Molex to Deutsch
UC4.5-BC-FC2
44658-24 Cable, UC4+™ Interface Power Pigtail
44658-27 Cable, UC4+™ Interface DT2 GND2 Bypass
31PRECISION BOOM HEIGHT CONTROL
UC
4.5™ Sprayer
Specific Electrical
Kit Number Part Number Model - Description Price
HARDI
UC4.5-BC-HD7/HD12
44658-49 Cable, Valve Roll Pigtail
44658-42 Cable, UC4+™ Interface AMP ML Only
44658-60 Cable, UC4+™Interface Bypass AMP Superseal
UC4.5-BC-HD9
44658-60 Cable, UC4.5 Interface Bypass AMP Superseal
44658-101 Cable, UC4.5 Interface Eagle Demo
UC4.5-BC-HD10
44658-60 Cable, UC4.5 Interface Bypass AMP Superseal
44658-105 Cable, UC4.5 Interface Delta Demo
John Deere
UC4.5-BC-JD6
44650-57 Cable, UC4.5™ Power John Deere
44653-10 Cable, UC4.5™ Adapter Molex to Deutsch
44658-10 Cable, Valve BC JD4920
UC4.5-BC-JD7
44650-57 Cable, UC4.5™ Power John Deere
44653-10 Cable, UC4+™ Adapter Molex to Deutsch
44658-01 Cable, UC4+™ Valve John Deere
UC4.5-BC-JD8
43250-07 Cable, UC5™ Battery John Deere Fused
44658-54 Cable, UC4+™ Interface RMAN/Bypass
UC4.5-BC-JD8A
43250-07 Cable, UC5™ Battery John Deere Fused
44658-45D Cable, UC4+™ Valve Main DT
44658-46D Cable, UC4+™ Valve BC C5 Roll with Pigtail
44658-54 Cable, UC4+™ Interface RMAN/Bypass
45101 UC4.5™ Boom Control Panel One Switch
UC4.5-BC-JD11
44658-87 Cable, UC4 Interface RM JD 4630
Miller Condor
UC4.5-BC-MC1
44658-89 Cable, Interface GP (Reverse Polarity)
UC4.5-BC-MC2
44658-21 Cable, UC4 Interface GP All
MS
UC4.5-BC-MS1
44658-19 Cable, UC4+™ Interface FT1 Main
44658-20 Cable, UC4+™ Interface FT1 Wings
UC4.5™ Boom Height Control
32 PRECISION BOOM HEIGHT CONTROL
WWW.NORAC.CA
Kit Number Part Number Model - Description Price
RoGator
UC4.5-BC-RG2 / RG5 / RG6 / RG7
43250-04 Cable, UC5™ Battery AMP Fused
44658-24 Cable, UC4+™ Interface Power Pigtail
UC4.5-BC-RG4
43250-04 Cable, UC5™ Battery AMP Fused
44658-32 Cable, UC4+™ Interface RoGator 854, 1054, 1254 (RG4)
44658-33 Cable, UC4+™ Interface MP2 GND2 Bypass
44658-116 Cable, UC4.5 Interface Bypass
Spra Coupe
UC4.5-BC-SC2
44653-10 Cable, UC4.5™ Adapter Molex to Deutsch
44658-15 Cable, Jam Valve Spray Coupe 700 Series
44658-116 Cable, UC4.5 Interface Bypass
UC4.5-BC-SC4
44650-60 Cable, Power and Interface Spray Coupe
Sprayer Specialties
UC4.5-BC-SS1
44658-18 Cable Valve AP2 Main
44658-34 Cable, Interface Bypass AP2
44658-111 Cable, Interface Roll Sense GP
Summers
UC4.5-BC-SM2
44658-69 Cable, UC4+™ Interface Roll DT
44658-70 Cable, UC4+™ Interface Remote Manual DT
Top Air
UC4.5-BC-TA1
44658-74 Cable, UC4+™ Interface Deutsch Bypass
44658-97 Cable, UC4+™ Interface DT06-2X GND2 - Diode
UC
4.5™
Spr
ayer
Spe
cific
Ele
ctri
cal
33PRECISION BOOM HEIGHT CONTROL
UC4.5™ Boom Height ControlU
C4.5™
Sprayer Specific E
lectrical
Kit Number Part Number Model - Description Price
Terragator
UC4.5-BC-TG1
43250-04 Cable, UC5™ Battery AMP Fused
44650-61 Cable, UC4.5™ Power Terragator Standard Control
44651-54 Cable, UC4.5™ Extension Terragator Standard Control
44651-55 Cable, UC4.5™ Cabin Entry Terragator Standard Control
44658-69 Cable, UC4.5™ Interface Roll DT
44658-114 Cable, UC4.5™ Interface Standard DT
44658-115 Cable, UC4.5™ Interface Standard MP280
44658-118 Cable, UC4.5™ Interface Roll MP280
UC4.5-BC-TG2
43250-04 Cable, UC5™ Battery AMP Fused
44650-61 Cable, UC4.5™ Power Terragator Standard Control
44651-54 Cable, UC4.5™ Extension Terragator Standard Control
44651-55 Cable, UC4.5™ Cabin Entry Terragator Standard Control
44658-113 Cable, UC4.5™ Interface Fast SC
Versatile
UC4.5-BC-VS1
43250-04 Cable, UC5™ Battery AMP Fused
44658-24 Cable, UC4+™ Interface Power Pigtail
34 PRECISION BOOM HEIGHT CONTROL
WWW.NORAC.CA
UC4+™ Kits – Discontinued
UC4+™ Boom Height Control kits have been discontinued and replaced by UC4.5™ kits. UC4+™ options and spare parts will continue to be available.
ForSprayerSpecificCablespleasereferencethebackofyourinstallationmanual. To obtain an installation manual for your NORAC system please visit www.norac.ca.
35PRECISION BOOM HEIGHT CONTROL
UC4+™ Options
UC
4+™ O
ptions
By installing this option an operator adds a second sensor to each wing. This sensor is normally mounted half way down length of the boom and provides average height for each boom, as well as a minimum height override. This option is helpful in any one or a combination of the following situations:
• Boom lengths longer than 90 ft. (27 m) • Land with sharp knolls such as terraces • Spraying in fall crop where there are thin or lodged areas
4465BC+-[HG/JD] Severe Terrain with Break-Away Brackets 4465BC+[and4465BC+JD-LP]SevereTerrainwithLowProfile Brackets
Severe Terrain
Kit Number Description Price
4465BC+ Severe Terrain Option with Break-Away Brackets (May be used with all UC4-BC and UC4+BC kits)
4465BC+LP SevereTerrainOptionwithLowProfileBrackets(MaybeusedwithallCaseKitsandGenericKits)
4465BC+HG Severe Terrain Option with Break-Away Brackets (May be used with all Hagie Kits)
4465BC+JD Severe Terrain Option with Break-Away Brackets (May be used with all John Deere Kits)
4465BC+JD-LP SevereTerrainOptionwithLowProfileBrackets(MaybeusedwithallJohnDeereKits)
4465BC+NT Severe Terrain Option with Break-Away Brackets (May be used with all Nitro Kits, not shown) All packages include: Two ultrasonic sensors with two mounting brackets and all required cables & hardware.
Item Number
Part Number
Description Price
B13 44728 Mounting Bracket, Complete UC4+™ Break-Away Extended
44695-11 Mounting Bracket, Break-Away Adapter UC4+™ Sensor (for Nitro or Hagie)
105415 ClampRound2inchSSforBreak-AwayandLowProfileBrackets(forJohnDeere)
44729 Nitro Mounting Bracket, Universal Spring Break-Away
B20 44971 MountingBracket,LowProfileShortFlange
C02B 44669 Cable, UC4+™ Severe Terrain 4th and 5th Sensor Cable
E02 44631 UC4+™ Ultrasonic Sensor
Severe Terrain – Replacement Parts
UC4+™ Boom Height Control
36 PRECISION BOOM HEIGHT CONTROL
WWW.NORAC.CA U
C4+
™ O
ptio
ns UC4+™ Options
Kit Number Description Price
4468BC+ UC4+™ Enhanced Stability*(May be used with trapeze style booms to increase boom stability. Requires Version 7 & higher software.)Package Includes: One roll sensor with all the required cables & hardware.
* Enhanced Stability can only be used with Version 2 Roll Sensors (part numbers 45000 and 45001).
Enhanced StabilitySomeboommovements,suchasboomflex,aredifficultforthestandard system to measure. This option adds the ability to measure more of the boom movements (roll in two places), providing a more accurate representation of boom position, therefore improving system performance. This will be most usefulontrapezeboomsandisonlyavailableforspecificsprayermodels.
4468BC+ UC4+™ Enhanced Stability Option
Item Number
Part Number
Description Price
C01 44674 Cable, UC4+™ Sensor Roll Bias
E01 45001 UC4+™ Roll Sensor Version 2
Enhanced Stability – Replacement Parts
Kit Number Description Price
4470BC+ UC4+™ Main Lift Sensor (Used for Active Roll™ systems)Package Includes: One sensor with all the required cables & hardware.
Item Number
Part Number
Description Price
B13 44743 Mounting Bracket, Universal Mount
C71 44674 Cable, UC4+™ Sensor Roll Bias
E02 44631 UC4+™ Ultrasonic Sensor
Main Lift Sensor – Replacement Parts
Main Lift Sensor This option can be added to Active Roll™ with only one ultrasonic sensor on the center section to provide a more accurate representation of boom position, therefore improving system performance.
4470BC+ UC4+™ Main Lift Sensor
37PRECISION BOOM HEIGHT CONTROL
UC4+™ Boom Height Control
UC
4+™ O
ptions
UC4+™ Options
Active Roll™The addition of NORAC’s patented Active Roll™ to the UC4+™ Boom Height Control systems enable the sprayer to go over severe terrain by rolling the center section, as well as controlling wing lift. Spray height is maintained, even in the most severe conditions. Rotating and controlling the center section also increases the wing lift speed.
Kit Number Description Price
4467BC+4B Active Roll™ for John Deere Sprayers (Current Model) – single station valve with 4 mounting bolts and compatible with 44963D and 44960D. Currently available for 4700 and 4800 Series Sprayers.Package Includes: Valve assembly, roll cylinder and all required cables, hoses & hardware.
Item Number
Part Number
Description Price
B09 44695-10 Bracket Sprayer Frame Target Roll Bias Cylinder
B11 44740 Mounting Bracket, Universal Mount
B12 44741 Mounting Bracket, Roll Sensor Target UC4+™
C70 44658-08D Cable, Valve Roll Bias DT
C71 44674 Cable, UC4+™ Sensor Roll Bias
E02 44631 UC4+™ Ultrasonic Sensor
44695-18 Pin Active Roll™ Cylinder Upper JD 20MM Zinc
Active Roll™ – Replacement Parts (Excluding Hydraulics)Note – Hydraulic Parts start on page 46
4467BC+4B Active Roll™ for John Deere Sprayers.
Kit Number Description Price
4473BC UC4+™ Roll Sensor Upgrade From UC4™ (Package Includes: Two roll sensors & cable) NOTE: For upgrade packages, the customer must return the Control Panel and all system sensors to NORAC Service. Price includes programming and testing of components but does not include repairs to components that are not returned in operating condition. Additional charges may apply to the UC3 system after inspection of components.
UC4+™ Upgrade Package
38 PRECISION BOOM HEIGHT CONTROL
WWW.NORAC.CA U
C4+
™
Serv
ice
Part
s
UC4+™ Service Parts
Kit Number Description Price
UC4+BC+SER UC4+™ Boom Height Control Service KitThis kit includes common parts that NORAC recommends all dealers stock.
Part Number Description Quantity
104409 Foam Disc 45 PPI Conductive 1/2 X 2-3/4 Dia 12
44631 UC4+™ Ultrasonic Sensor 2
44664 Cable, UC4+™ Can Node Dual 5’ 1
44668 Cable, UC4+™ Sensor Branch 1 Amp Recept 3 Amp Plug BC 1
45000 UC4+™ Plus Roll Sensor with Temperature Probe Version 2 1
45001 UC4+™ Plus Roll Sensor Version 2 1
Part Number Description Price
44645-02 Transducer Service Kit (Includes 6 transducers)
44645-03 Sensor O-Ring Service Kit (includes 6 silicone O-Rings)
106285 Hydraulic Filter Element 3000PSI 10 Micron Long End Cap
45020 Ultrasonic Sensor Velcro Field Update Kit (Updates one sensor)
105739 Vibration Mount
Service Replacement Parts
39PRECISION BOOM HEIGHT CONTROL
Kit Number Description Price
45010 UC4+™ Boom Height Control Panel Programming KitThis kit includes the required tools and software for updating UC4+™ panels.
Part Number Description Quantity
44649 UC4+™ Panel Programmer 1
54733 NORACToolsuiteandVerificationToolUSBDrive 1
UC4+™ Boom Height Control
Kit Number Description Price
44645 UC4+™ Boom Height Control Resource KitThis kit includes the tools and spare parts required for updating UC4+™ panels and calibrating/testing UC4+™ sensors.
Part Number Description Quantity
106127 ADH RTV 162 White Silicone - 85ml Tube 1
44644 CANbus Monitor 1
44644-04 Cable, Busmonitor Power Stand-Alone Device 1
44645-02 Transducer Service Kit 1
44645-03 O-Ring Service Kit 2
44645-04 Foam Disc Service Kit 1
54733 NORACToolsuiteandVerificationToolUSBDrive 1
44968 Ultrasonic Sensor Calibration Fixture Type 2 1
Part Number Description Price
44644 CANbus MonitorUsed with NORAC software for monitoring CANbus communication and programming UC4+™ panels.
UC
4+™
Service Tools
Kit Number Description Price
64645 UC5™ / UC4.5™/ UC4+™ Verification Tool KitThis kit includes a PEAK CANbus monitor and the software required for using NORAC’s VerificationToolwhich isusedtoensureproper installationandsettingsofUC5™,UC4.5™and UC4+™.
Part Number Description Quantity
106359 PEAK PCAN-USB CANbus Monitor 1
44644-08 Cable, Bus Monitor (DT Female to AMP Male) 1
44644-11 Cable, PEAK CANbus Monitor UC5™ Tee Male and Female 1
44644-12 Cable, Bus Monitor (DT Male to AMP Female) 1
54733 NORACToolsuiteandVerificationToolUSBDrive 1
UC4+™ Service Tools
40 PRECISION BOOM HEIGHT CONTROL
WWW.NORAC.CA
UC4+™ Common Parts
UC
4+™
C
omm
on P
arts
41PRECISION BOOM HEIGHT CONTROL
UC4+™ Boom Height Control
Common Parts
UC
4+™
Com
mon Parts
Item Number
Part Number
Description Price
B11 44743 Mounting Bracket, Universal Mount
B13 44728 Mounting Bracket, Complete UC4+™ Break-Away
44724 Bracket, Break-Away Spacer 2 inch with Bolts
B17 44972 SensorMountingBracketLowProfileRainflap
B20 44971 SensorMountingBracketLowProfileShortFlange
B21 44973 SensorMountingBracketLowProfileLongFlange
44706-01 Cable Tie Black 10 pcs 21 inch, 150 pcs 7.5 inch
C02 44668 Cable, UC3 Sensor Branch 1 AMP Recept 3 AMP Plug BC
C02B 44664 Cable, UC4+™ Can Node Dual 5’
44662B-40 Cable, UC3 Sensor Trunk To AMPF - 40’ Long
44669 Cable, UC4+™ Severe Terrain 4th and 5th Sensor Cable
44672TB-3 Cable, UC4+™ Sensor AMPF to Pigtail w/Termination Resistor Black Standard 3’
C03 44656 Cable, Valve Variable Rate (for valve part # 44933S)
44656D Cable, Valve Variable Rate (for valve part # 44933D, 44963D & 44960D)
C10 44650-35 Cable, Power Generic Pull-Type
44650-39 Cable, Power Generic Self-Propelled
C11 44651-03 Cable, Generic Valve Extension (input/output)
44651 Cable, Valve Extension (output only)
C12 44658-35 Cable, Interface UC4+™ Generic
C13 44658-36 Cable, Interface Wings UC4+™ Generic
44658-38 Cable, Interface UC4+™ DIN All
44658-39 Cable, Interface UC4+™ DIN
44658-49 Cable, Valve UC4+™ Roll Pigtail
C14 44658-28 Cable, Interface UC4+™ Power Pigtail
E01 4461BC+ UC4+™ Sprayer Boom Control Panel
105421 UC4+™ Mount Modular Flex Black
E02 44631 UC4+™ Ultrasonic Sensor
104409 Foam Disc 45 PPI Conductive
101050 Metric Nut 8 mm
102126 Metric Lock Washer 8 mm
105739 Vibration Mount DIA 30MMx30MMx8MM Thread Custom
44631RB UC4+™ Ultrasound Sensor Rebuilt
E03 44641 UC4+™ Roll Sensor With Temperature Probe Version 1 (Previous Model)*
44641RB UC4+™ Roll Sensor With Temperature Probe Version 1 Rebuilt
45000 UC4+™ Roll Sensor With Temperature Probe Version 2 (Current Model)*
45000RB UC4+™ Roll Sensor With Temperature Probe Version 2 Rebuilt
E04 44642 UC4+™ Roll Sensor Version 1 (Previous Model)*
44642RB UC4+™ Roll Sensor Version 1 Rebuilt
45001 UC4+™ Roll Sensor Version 2 (Current Model)*
44732 Mounting Bracket, UC4+™ Roll Sensor
44733 Mounting Bracket, UC4+™ Roll Sensor Trapeze Link Plate
45001RB UC4+™ Roll Sensor Version 2 Rebuilt
* 44641 and 44642 Roll Sensors can not be paired with 45000 and 45001 Roll Sensors. Refer to NORAC Technical Bulletin #11–05 for more information.Note – Hydraulic Parts start on page 46
42 PRECISION BOOM HEIGHT CONTROL
WWW.NORAC.CA
44963D Proportional Valve Block
Cur
rent
Hyd
raul
ic
Part
s
Hydraulic Parts – Current ModelsPart Numbers 44963D, 44960D & 44962DNORAC Proportional Valves are used in the UC5™, UC4.5™ and UC4+™ product lines.
This valve was changed in 2011 to include:
• Redesignedfiltercap• A & B ports were reversed to accommodate internal design changes• Move from 3-bolt pattern to a 4-bolt pattern for the additional of expansion models
43PRECISION BOOM HEIGHT CONTROL
Current H
ydraulic Parts
Hydraulic Components (UC5™, UC4.5™ and UC4+™)
Hydraulic Parts – 44963D, 44960D & 44962D
Item Number
Part Number
Description Price
44963D Valve Package 2-Station Closed Center Proportional Expandable (Deutsch Connectors)
44960D Valve Package 3-Station Closed Center Proportional Expandable (Deutsch Connectors)
44962D Expansion Valve Closed or Open Center Proportional DPOC (Deutsch Connectors)
1 106282 Hex Socket Capscrew NC 3/8x1-1/4 Clear Chrome
2 106203 Filter Cap 4 Bolt with #6 ORB Port
3 106284 Seal Quad Ring for Filter Cap
4 106285 Hydraulic Filter Element 3000PSI 10 Micron Long End Cap
5 106329 Plug #4 SAE Zero-Leak
6 44896 Insert Valve Block Filter Rev B
7 104998 O-Ring 5/8 OD X .420 ID X .103
8 106076 Hydraulic Check Valve C-8-2 with Poly Seal
44-SKC82 SealKitfor8-2CartridgeTeflonRing,NBRBoss,PolyO-Ring
10 106281 Hydraulic Check Valve Pilot Operated C-8-3
44-SKC83 SealKitfor8-3CartridgeTeflonRings,NBRBoss,PolyO-Rings
11 106065 Hydraulic Check Valve Dual Pilot Operated C-8-4
44-SKC84 SealKitfor8-4CartridgeTeflonRings,NBRBoss,PolyO-Rings
12 102706 O-Ring Square Valve D05 12.42 x 1.68 NBR70
13 Hydraulic Fittings for NORAC Block - See Page 54
14 Hydraulic Orifices - See Page 54
16 44956 OrificeScrew-in0.016-1/4-20x3/8(Canbereplacedwithpart#105500,seeitem#26)
17 106328 Plug #2 SAE Zero-Leak
18 106204 Hex Socket Capscrew 10-24 x 1-3/4 Stainless Steel
19 106063 Hydraulic Solenoid Valve 12V CC Proportional Deutsch Connector
20 106118 O-Ring Solenoid Body Seal (Viton 22mm ID X 1.5mm)
21 106080 Coil 12V for Proportional Hydraulic Valve NORAC P/N 106063
22 105948 Coil Nut and O-Ring for NORAC P/N 106063, 105723, 105599
23 102705 O-Ring for D03 Square
24 104943 Hydraulic Check Valve C-10-2
44-SKC102 SealKitfor10-2CartridgeTeflonRing,NBRBoss,PolyO-Ring
25 106328 Plug #2 SAE Zero-Leak
26 105500 Setscrew Plug NC 1/4 x 3/8 Stainless Steel
29 44700-06 Valve Mounting Kit
40 106072 Double Ended Stud 3/8 x 4 SS (4 required to mount one expansion valve)
41 106073 Double Ended Stud 3/8 x 6 SS (4 required to mount two expansion valves)
42 106074 Double Ended Stud 3/8 x 7.5 SS (4 required to mount three expansion valves)
43 100851 Nut 3/8 Stainless Steel
44 100947 Lockwasher 3/8 Stainless Steel
45 44704 Valve Mounting Bracket
Replacement Manifolds
15 44969 Valve Assembly Expansion 4 Bolt NO Solenoids
9 44970 Valve Assembly 2-Station CC/LS 4 Bolt NO Solenoids
9 44974 Valve Assembly 3-Station CC/LS 4 Bolt NO Solenoids
44 PRECISION BOOM HEIGHT CONTROL
WWW.NORAC.CAD
isco
ntin
ued
Hyd
raul
ic P
arts
Hydraulic Parts – DiscontinuedPart Numbers 44933D & 44952D
44933D Proportional Valve Block
45PRECISION BOOM HEIGHT CONTROL
Discontinued
Hydraulic Parts
Hydraulic Components (UC5™ and UC4+™)
Hydraulic Parts – 44933D & 44952D
Item Number
Part Number
Description Price
44933D Valve Package Two Station Proportional Expandable (Deutsch Connectors)Use Part Number 44963D
44952D Expansion Valve Dual Pilot Operated Check Deutsch Connectors
1 Hydraulic Fittings for NORAC Block - See Page 54
2 44897 Filter Cap with #6 O-Ring Boss Port
105361 O-Ring for 24MB Coupling 1.72 inch ID x 0.12 inch 90 Durometer
3 106285 Hydraulic Filter Element 3000PSI 10 Micron Long End Cap
4 44896 Filter Insert
5 104998 O-Ring 5/8 x 0.42 inch ID x 0.103 inch
6 Valve Block Two Station Closed Center Not Available
7 104943 Hydraulic Check Valve C-10-2
44-SKC102 SealKitfor10-2CartridgeTeflonRing,NBRO-RingwithBoss
8 44928 Hydraulic Fittings for NORAC Block - See Page 54
9 104944 Hydraulic Check Valve Pilot Operated C-10-3S
44-POC1KIT SealKitfor10-3SCartridgeTeflonRings,NBRO-RingswithBoss
10 106283 Coupling Hydraulic Plug 4MBP CS Hex
11 106057 O-Ring Face Seal #12 90 Durometer Nitrile 0.74 inch x .07 inch
12 106076 Hydraulic Check Valve C-8-2
44-SKC82 SealKitfor8-2CartridgeTeflonRing,NBRO-RingwithBoss
13 Hydraulic Orifices - See Page 54
14 106065 Hydraulic Dual Pilot Operated Check Valve C-8-4
44-SKC84 SealKitfor8-4CartridgeTeflonRings,NBRO-RingswithBoss
15, 16, 17 Valve Mounting Hardware - See Page 47
18 Valve Block Expansion Single Station Not Available
19 100739 Hex Socket Cap Screw 10-24 x 2 inch
20 106063 Hydraulic Solenoid Valve 12V CC Proportional Deutsch Connector
21 102705 O-Ring for D03 Square
22 105948 Coil Nut and O-Ring used for NORAC Part Numbers 106063, 105723, 105599
23 106118 O-Ring Solenoid Body Seal (Viton 22mm ID X 1.5mm)
24 106080 Coil 12V used for Proportional Hydraulic Valve NORAC Part Number 106063
25 Nut and O-Ring - Multiple versions available. Contact your sales rep for further information.
26 Hydraulic Coil - Multiple versions available. Contact your sales rep for further information.
27 105485 Connector DIN Gasket
Replacement Manifolds
9 44970 Valve Assembly 2-Station CC/LS 4 Bolt NO Solenoids
46 PRECISION BOOM HEIGHT CONTROL
WWW.NORAC.CAO
pen
Cen
ter
Hyd
raul
ic B
lock
Open Center Compensated Proportional Valve Block
Item Number
Part Number
Description Price
30 106258 Filter Cap 4 Bolt with Filter Recess
31 44964 OrificeScrew-in0.026-1/4-20x3/8
32 106279 Hydraulic Relief Valve 3200PSI Max C-8-2
33 106280 Hydraulic Valve Blocking NC Deutsch Connector with Manual Override
34 106259 Manifold Block Open Center / Load Sensing with A Relief (For 44959D)
35 106278 Hydraulic Pressure Compensator 230 PSI C-10-3S
44959D- Open Center Compensated Proportional Valve Block
This optional hydraulic block has integrated features that allow it to operate efficientlywith open center hydraulics systems.
Kit Number Description Price
44959D Valve Package 2-Station Open Center Compensated Proportional Expandable (Deutsch Connectors)
Open Center Compensated Proportional Valve Block – Replacement Parts
47PRECISION BOOM HEIGHT CONTROL
Hydraulic Components (UC5™, UC4.5™ and UC4+™ )A
ctive Roll™
H
ydraulic Parts
Item Number
Part Number
Description Price
V70 44962D Expansion Valve Dual Pilot Operated Check Deutsch Connectors - 4 Bolt (Current Model)
V70 44952D Expansion Valve Dual Pilot Operated Check Deutsch Connectors - 3 Bolt (Discontinued)
B10 44695-21 Pin Active Roll JD Upper Mounting Kit
H75 44695-22 Hydraulic Cylinder AR 1.75 inch with Internal Sensor
44862-11 Hose Assembly 122R2-04 60 inch L 4FORX 4FORX
44864-03 Hose Assembly 122R2-08 166 inch L 6FORX 6FORX
44864-04 Hose Assembly 122R2-08 168 inch L 6FORX 12FORX
44865-38 Hydraulics Fitting Kit - Active Roll™
Active Roll™ for John Deere 4700 and 4800 Series Sprayers
Active Roll™ – Hydraulics Replacement Parts
Active Roll™ for John Deere 4930 and 4940 Sprayers (5467BC-4B-JD10) – Hydraulics Replacement Parts
Item Number
Part Number
Description Price
H20 44795-202 Roll Position Cylinder 40.86 IN 2PS AC JD
44863-31 Hose Assembly 122R2-06 106 inch L 6FORX 6FORX
44865-66 Hydraulics Fitting Kit - JD10A
V02 44962D Expansion Valve Dual Pilot Operated Check Deutsch Connectors - 4 Bolt
5467BC-4B Active Roll™ for John Deere 4700 and 4800 Series Sprayers
5467BC-4B-JD10 Active Roll™ for John Deere 4930 and 4940 Sprayers
48 PRECISION BOOM HEIGHT CONTROL
WWW.NORAC.CA
Active Wing Roll™ – Hydraulic Replacement Parts
Active Wing Roll™ for Apache, Case, John Deere, Miller Nitro, New Holland and Rogator Sprayers
Item Number
Part Number
Description Price
44863-23 Hose Assembly 122R2-06 32 inch L 6FORX 6FOR
44863-53 Hose Assembly 122R2-06 66 inch L 6FORX 6FOR
44865-75 Hydraulics Fitting Kit - AWR1
V02 44962D Expansion Valve Dual Pilot Operated Check Deutsch Connectors - 4 Bolt
H20 44978 Wing Roll Cylinder with Position Sensor
5466BC-[AP/CS/NT/RG] Active Wing Roll™ Option 5466BC-JD-R Active Wing Roll™ Option for John Deere
Act
ive
Win
g R
oll™
H
ydra
ulic
Par
ts
49PRECISION BOOM HEIGHT CONTROL
Roll Position Cylinder and Roll Position Damper
Kit Number Description Price
44792-xxx* Roll Position Damper
44795-0xx* Roll Position Cylinder with External Position Measurement and Auto Charge
44795-2xx* Roll Position Cylinder with Internal Position Measurement and Auto Charge
* Contact your sales rep for exact part numbers.
44792-xxx* Roll Position Damper
44795-2xx* Roll Position Cylinder with Internal Position Measurement and Auto Charge
44795-0xx* Roll Position Cylinder with External Position Measurement and Auto Charge
Part Number Description Price
44750-3 Mounting Bracket Linear Roll LT Upper and Lower - AGCO Large Tree
44750-10 Mounting Hardware Linear Roll RoGator Upper
44750-11 Mounting Hardware Linear Roll RoGator Lower
44750-12 Mounting Hardware RPD Rogator LSD to RPD Upgrade
44771B-1 Mounting Bracket Sensor Ball LRC 9 inch CC
44773B-1 Target Cylinder RPC Hardi
44787B-1 Target Spring Ball LRC 9 inch CC
106709 Washer Spacer RPC/EPD Mild (Included with Hardi RPC)
106710 Washer Spacer RPC/RPD Hard (AGCO Orders Seperately - 3 per RPD) (Included in Aftermarket and Upgrade Kits)
106774 Washer Spacer RPC/RPD Hard Long (AGCO Orders Seperately - 1 per RPD) (Included in Aftermarket and Upgrade Kits)
Roll Position Cylinder and Roll Position Damper – Replacement Parts
Recharge Kit for Hydraulic CylinderKit Number Description Price
44796-Service Recharge Kit RPD Hand Pump with Fixture
44797 Recharge Kit LRC/LSD Hand Pump and Fluid
Part Number Description Price
105798 HVI 10W Shock Oil Liter
106665 Hydraulic Hand Pump 4 Ton Porta-Power
106666 Gauge Pressure GLY 0-2000 PSI
106677 Hydraulic Ball Valve 1/4 Turn 6FP Ports 3000 PSI
165001 Syringe 10CC
Recharge Kit – Replacement Parts
Roll Position C
ylinder and D
amper Parts
Hydraulic Components (UC5™, UC4.5™ and UC4+™ )
50 PRECISION BOOM HEIGHT CONTROL
WWW.NORAC.CA
Hydraulic Fittings for NORAC Block
Part Number Description Price
103312 Coupling 6MB-6MJ
103719 Coupling 6MB-4MJ
104369 Coupling 6MBP
105151 Coupling 6MB-8MOR
44917 Coupling 6MB-6MOR
44916 Coupling 6MB-4MOR
501301 Coupling 6MB-6MBSP
501304 Coupling 6MB-4MBSP
HydraulicOrifices Part Number Description Price
105011 OrificeInsert.026InchOne-way
44927 OrificeInsert.031InchOne-way
44935 OrificeInsert.042InchOne-way
44928* OrificeInsert.047InchOne-way
44929 OrificeInsert.062InchOne-way
44893 OrificeInsertFixed1/32
44926 OrificeInsertFixed3/64
44906 OrificeInsertFixed1/16
*StandardorificesuppliedinmostNORACSprayHeightControlkits.
Please refer to page 46 for overview valve block drawing
Please refer to page 46 for overview valve block drawing
Additional Hydraulic Parts
4467BCX-4 John Deere 30 Series Hydraulic Update Kit
Explanation of Kit:• Installation of larger diameter hydraulic hoses and fittings, which will
greatly improve boom speeds and therefore improve overall performance.• Replacement of the existing upper undersized Active Roll™/link arm pin
with a 20mm pin which will reduce the play in the upper roll link/Active Roll™ cylinder, therefore improving stability. The lower 20mm bolt does not need to be changed.
• Please refer to NORAC Technical Bulletin 11-04.
Available for the following John Deere 30 Series Kits: • UC4+BC+JD8, UC4+BC+JD8A • UC5-BC-JD08, & UC5-BC-JD08A
Performance Update Kit – JD 30 Series
Item Number
Part Number
Description Price
44865-61 Hydraulics Fitting Kit - JD8 Update Kit
H02 44863-53 Hose Assembly 122r2-06 66 In L 6FORX 6FORX
H04 44863-31 Hose Assembly 122r2-06 106 In L 6FORX 6FORX
44695-18 Pin Active Roll™ Cylinder Upper JD 20mm Zinc
John Deere 30 Series Hydraulic Update Kit – Replacement Parts
Kit Number Description Price
4467BCX-4 John Deere 30 Series Hydraulic Update Kit
Add
itio
nal
Hyd
raul
ic P
arts
51PRECISION BOOM HEIGHT CONTROL
Warranty
Part Number Description Price
EW-UC5-1 UC4.5™ and UC5™ Parts Only One-Year Extension Warranty
EW-UC5-2 UC4.5™ and UC5™ Parts Only Two-Year Extension Warranty
Extended Warranty PackagesNORAC continues to develop Spray Height Control systems that provide the best performance available on the market today. Warranty is only available if you register your new purchase or if you purchase Extended Warranty. By registering online (www.norac.ca) most system updates will be done FREE OF CHARGE for the next two years.
NORAC Systems International Inc.Statement of Limited WarrantyNORAC SYSTEMS INTERNATIONAL INC., also known as NORAC, warrants all equipment of its manufacture to be free of defects in material and workmanship for a period of one year. This warranty period is for a period of twelve months from the date the equipment is delivered by NORAC or its authorized dealer to the purchaser. Items include control systems and genuine replacement parts manufactured by NORAC. Auxiliary components not manufactured by NORAC or NORAC rebuilt parts are covered by a 90-day warranty.
NORAC will repair free of charge items returned within the warranty period to one of NORAC’s authorized service centers. In countries where NORAC maintains authorized service centers, freight will be paid one way and returned by the same carrier unless instructed differently. The purchaser is responsible that the item is properly packaged for shipment. Shipping damage is not covered under this warranty.
NORAC or its authorized Service Center will repair or replace, at its option, any defective part or component at nocosttothepurchaserduringtheWarrantyperiod.IfserviceinthefieldisrequiredNORACwillauthorizeon-site repairs at no charge for parts and labor. Travel time, travel costs and per diem expenses to and from the place where repairs are made, will not be covered by this warranty. For the nearest Service Center visit our website at www.norac.ca or call +1 306 664 6711 or e-mail [email protected].
Any evidence of, negligent or abnormal use, alteration of serial numbers, or repairs attempted by other than NORACauthorizedpersonnelornotusingNORACcertifiedorrecommendedparts,automaticallyvoidsthewarranty. Normal wear is not covered under this warranty.
NORAC will not warranty any complaints relating to inadequate installation (unless the installation was performed by NORAC), adjustments or calibration.
The forgoing states the entire liability of NORAC regarding the purchase and use of its equipment. The purchaser agrees that NORAC accepts no liability for any consequential loss or damage of any kind. The purchaser further agreesthatthewarrantiescontainedhereinareinlieuofallotherwarranties,expressedorimplied,and,specificallyNORACdisclaimsanyimpliedwarrantyregardingmerchantabilityorfitnessforaparticularpurpose.Thisparagraphis of no force or effect in those jurisdictions, where the limitations of the type noted herein are prohibited by law.
To ensure warranty coverage the customer must register within 30 days of their purchase by either sending in a registration form included with the equipment or online at www.norac.ca.
www.norac.ca
NORAC SYSTEMS INTERNATIONAL INC.3702 Kinnear Place
Saskatoon, SK S7P 0A6Canada
Phone: (+1) 306 664 6711 Fax: (+1) 306 664 6664
Toll Free: (+1) 800 667 3921
NORAC, INC.6667 West Old Shakopee Road, Suite 111
Bloomington, MN 55438United States
Phone: (+1) 952 224 4142Fax: (+1) 952 224 4149
Toll Free: (+1) 866 306 6722
NORAC EUROPE SARLRue de l’Hermitage
01090 Guéreins France
Phone: +33 (0)4 26 47 04 42
Printed in Canada