As it is Hydramotion’s policy constantly to develop and improve its products, some information contained in this document may change without noticeM04-01-051 Rev2 06/16
continuous PVT tracing
one sweep measurement — wide viscosity range
high accuracy and repeatability
no moving parts — no maintenance
SPECIFICATION
HyperVisc 100 precision PVT viscometer
0 - 10,000+ cP in one single range
1 second
1% of reading or ±0.1 cP
0.3% of reading or ±0.05 cP
–50 - +250 °C, +300 °C or +350 °C *
integral thermometer
690, 1380 or 2070 bar
(10,000, 20,000 or 30,000 psi) *
4 ml *
HiP HF4 *
all-welded, crevice-free
sensor: alloy C276 (EN 2.4819)
measurement cell: alloy C22 (EN 2.4602)
or alloy C276 (EN 2.4819) *
N6 0.8 µm Ra
optional: electropolished, electroplated *
type: V-Con 100
ingress protection: IP65
materials: SS316 (EN 1.4401)
+ aluminium alloy 6082 (EN AW-6082)
ViscoLink data viewing and logging
package (Windows-based for PC)
Viscosity range
Measurement time
Accuracy
Repeatability
Temperature range
Measured temperature
Pressure rating
Sample volume
Process connection
Construction
Materials
Surface finish
Interface
Software
* Custom variations to specification available to order
HV1 Interface Unit
HV750 Readout Unit HV1 Transducer 0 100mm
Heated zone
HV1 transducer in measurement cell
M20cable gland
316 stainless steel process headIP67
24mm
Flange fitting shown as example
41mm
150mm
100mm
210mm