32
www.eva-last.com Premium capped and uncapped composite decking
www.eva-last.com
Premium capped and uncapped composite decking
Eva-Last® sets a new standard for durable outdoor
composite decking & accessories. Our high quality,
low-maintenance composite is created without felling a
single tree, and saves you from the hassles of traditional
timber decking upkeep. Our glowing international track
record stands as testament to our beautiful, durable
and versatile product ranges, and the lifestyle benefits
they provide.
GLOBAL PROOF OF PRODUCT
PERFORMANCE
Why Eva-Last®
Strong, sustainable bamboo
Made using solar energy
Eva-Last® harnesses the strength and resilience of bam-
boo to create an ultra reliable composite, which spans
further and lasts longer than the competition. Using
bamboo also helps fulfill the Eva-Last® pledge to make
a holisitically green, high quality product.
Eva-Last® offers four outstanding ranges of weather resistant bamboo composite decking products to suit
your specific outdoor project. The ApexTM
InfinityTM
, Eva-techTM
and EclipseTM
decking technologies come with
industry-leading protection warranties, and each line offers its own specialised benefits.
Eva-Last® is fully committed to offering you a product
that’s green from start to finish. That’s why we now man-
ufacture using solar energy. Not only are we raising the
bar on how quality composite should perform, we’re also
setting new standards for how responsible eco-conscious
production can be achieved with the earth in mind.
GLOBAL PROOF OF PRODUCT
PERFORMANCE
SUSTAINABLE
Bamboo is a type of grass and
grows and regenerates extremely
quickly, with most species
reaching adulthood within 3 – 5
years. This amazing plant is one
of the most environmentally
friendly resources on the planet
and requires no pesticides or
chemical fertilizers to grow.
Bamboo keeps our soil stronger,
our air cleaner and our environ-
ment healthier.
Bamboo must be one of the
most underrated materials on
the planet when it comes to
strength. It has a greater tensile
strength (resistance to being
pulled apart) than steel, and can
withstand compression better
than concrete. These properties
make for an ultra strong end
product and allow Eva-Last® to
offer an industry leading
guarantee on InfinityTM decking.
STRONG
Bamboo is known for its incred-
ible cooling effect and its ability
to deflect heat more effectively
than wood. All natural fibres
have a built-in thermostat,
and Mother Nature has turned
bamboo’s way, way down. This
means your deck will be cooler
in hot weather and a bit warmer
in the cold, just another great
benefit of using bamboo over
wood in composite decking.
Bamboo is a super clean and
safe material and the perfect
additive for composite decking.
Bamboo naturally repels odor
and is hypoallergenic when
compared to timber. Bamboo as
a fibre is actually certified by
most food agencies as safe to
eat. So your customers can rest
assured that InfinityTM decking
will be the cleanest, safest sur-
face for them and their families.
COOL SAFE
LIM
ITED
WARRANTY
YEARS
DUAL TONE
CG005
ARCTIC BIRCH
CB015
ISLAND MAHOGANY
CB010
BRAZILIAN TEAK
VIBRANT
C
OLO URS
CL016
SWEDISH OAK
CG011
ALASKAN DRIFTWOOD
CB013
HAWAIIAN WALNUT
CL014
HIMALAYAN CEDAR
CD002
SIBERIAN BARK
This co-extruded composite line reaches new heights in what is possible for decking. With it's specially engineered lightweight
PVC and bamboo core, capped in a hardened acrylic polymer shell, Apex™ performs better, and offers you a more realistic
finish, than ever before. The resultant combination is a durable and lightweight board with advanced work ability and
incredibly realistic and more natural appearance.
Apex™ Dual tone colour range adds an extra layer of colour to each board to enhance the
natural look of your composite project. The variance in shades within a single composite profile
beautifully represents the colour tones found in timber, making your composite all the more
striking. Dual tone colours are ideal for mid-to-large-scale composite decks and projects, or
other areas that are all about that natural look.
What Apex™ offers you
VIBRANT DUAL TONE COLOURS
DECKING | CLADDING | SCREENING
ABT001
CHESNUT ORCHID
ALAS06
CENTURY BEIGE
ABAS03
BEACH SAND
ABAS08
BURNT COPPER
AB010
OUTBACK EARTH
ABT012
SAND DUNE
SS05
STORMY COAST
ABAS02
CARAMEL SUNSET
AGAS04
SLATE STONE
ABAS07
ENGLISH QUARRY
AGAS05
MISTY GRAY
AGT009
PYRENEES GREY
APEXTM composite adds a touch of class to your home with its handsome finish and range of classic colours. The single tone
colour range offers a consistent look that pairs well with other types of materials, such as stone, concrete and brick.
SINGLE TONE COLOURS
Take home the benefits
Core material:Bamboo, cellular PVCThe foamed mineral-polymer core has improved
water absorption and fire resistance.
Better decking, better living
The ApexTM surface finish can proudly boast the best slip resistance in its class to help prevent life’s little mishaps.
This co-extruded composite line reaches new heights in what is possible for decking. With its specially engineered lightweight PVC and
bamboo core, capped in a hardened acrylic polymer shell, ApexTM performs better, and offers you a more realistic finish, than ever before.
ApexTM is a Euroclass B FR rated composite decking board which can help reduce the risk of fire damage.
Leading slip resistance Euroclass B FR rated
Capping material:Engineered acrylic polymer
Innovative double layer polymer coat provides a unique texture and aesthetic
characteristic as well as a vastly improved slip resistance.
Highly attractive. Ultra-low maintenance.
The Eva-Last® ApexTM co-extruded range is very attractive and has many uses due to it’s light-
weight nature. This versatile product range has many uses and applications. Available profiles
include grooved and square edge decking boards, fascias, trims and utility profiles.
Grooved, solid, double sided
deck boards
Grooved, semi-capped, single
sided deck board
Non-grooved, semi-capped,
single sided deck board
Decorative keel Non-decorative keel Semi-capped single sided fascia
and screen board
ApexTM performs in all residential, commercial and high traffic industrial applications.
From hotels and lodges to ocean marinas, boardwalks, promenades, restaurants,
shopping centres and tranquil residential settings,
whatever the vision, ApexTM has a solution
to suit.
Single tone colour only
Dual and single tone colour
Complete ease-of-maintenance. Complete peace-of-mind.
The proprietary manufacturing process used in the creation of Eva-Last® InfinityTM
achieves an infinitely variable and
authentic colour finish, comparable only to natural timber. This advanced and innovative technology allows for
incredible colour blending, providing one of the best looking composite boards available.
C06
TIGER COVE
C76
OASIS PALM
C70
CARIBBEAN CORAL
C11
CAPE TOWN GREY
C07
SPANISH SAFFRON
C92
SWISS OAK
C69
PACIFIC PEARL
C10
SAPPHIRE SILVER
Eva-Last® Infinity™ performs in all residential, commercial and high traffic industrial applications. From safari lodges to ocean
marinas, boardwalks, promenades, restaurants, shopping centres and tranquil residential settings, whatever the vision,
Eva-Last® Infinity™ will bring it to life.
DECKING | CLADDING | SCREENING | RAILING
What Infinity™ offers you
VIBRANT NATURAL COLOURS
C08
COPPER CANYON
C12
SAHARA SAND
C93
CREAM
C24
FIRE KOA
C09
KONA SUNSET
C94
CONCRETE GREY
C02
BALTIC NERO
For printing and display reasons, the board images herein may vary slightly from the actual board colours. Physical samples should be viewed to
determine actual colour before placing any orders.
Inspired by nature, designed for life
C15
ESPRESSO ROAST
Protected by the revolutionary Eva-Last® capping technology, InfinityTM has outperformed wood and timber
on a global scale. With over a decade of design and development behind it, tested in some of the harshest
climates worldwide, comes a co-extruded bamboo composite range built to withstand all that Mother Nature
has to throw at it.
Horizontal or vertical applications available
High traffic commercial applications Low traffic residential applications
Engineered polymer co-extrusion
It’s all in the finish
Benefits of InfinityTM
Eva-Last® InfinityTM
’s revolutionary capped and embossed surface layer offers superior performance and
ease-of-maintenance. This advanced cap technology is co-extruded simultaneously to the core, giving
Eva-Last® InfinityTM
one of the most hardwearing, stain-resistant, scratch-resistant, slip-resistant and splin-
ter-free surface finishes available.
Eva-Last® InfinityTM is resistant to moisture has high UV stability and has first-class insulating properties making
it one of the most durable and long lasting products in its class.
The innovation of co-extrusion technology resulted in the development of our Infinity™ range. The advancement allowed
for the bamboo-plastic composite core to be wrapped in a protective cap, further improving the longevity of the product.
The Eva-Last®’s engineered polymer coat is equipped with additives that result in an extremely robust outer layer. This
layer protects the products from weathering and biodegradation, even within particularly harsh conditions.
Bamboo
Waste plastic
EVA-LAST® ENVIRONMENTAL PHILOSOPHY
Our philosophy in a nutshell
When you choose Eva-Last®, you are making a truly thoughtful choice for you and the environment. Eva-Last® InfinityTM offers a durable, low-maintenance bamboo composite that consistently outperforms timber and other composites.
Industry & environmental recognition
Eva-Last® has always been at the forefront of the green building industry and, since our inception in 2007, we have been continually and consistently improving our commitments to serving the environment and our clients.
We love trees
No trees are cut down for the purpose of creating Eva-Last® products. Eva-Last® uses only repurposed timber and bamboo, paired with high-quality recycled plastics.
Recycling at its best
Eva-Last® is an industry leader in utilising recycled plastics, which would otherwise end up in landfills and oceans. We transform this potential waste into striking and durable decking, railing and fascade products.
Out with the bad, in with the good
Eva-Last® products are free of toxic chemicals and preservatives normally used for the treatment of natural timber products.
Waste not, want never
In our factory, only the coffee grounds are tossed away. Every bit of quality, left over product is put back into the manufacturing line to be recycled and made into beautiful, useful decking surfaces.
Getting it there with “green” in mind
We go the distance to ensure our transportation channels have the lowest carbon emissions and smallest environmental footprint possible.
Highly versatile. Ultra-low maintenance.
The Eva-Last® InfinityTM co-extruded range is highly versatile in its uses and applications. Available
profiles include I-SeriesTM, solid, arched, grooved, non-grooved and fascia boards as well as trims and
stair treads.
Grooved, solid, double sided
deck boards
Non-Grooved, double sided
deck boards
Stair tread board
Grooved, arched, single sided
deck boards
Grooved, hollow, double sided
deck boards
I-series deck boards
Double sided fascias and
screen boards
Non-Grooved, single sided
deck boards
Eva-Last® InfinityTM performs in all residential, commercial and high traffic
industrial applications. From safari lodges to ocean marinas, boardwalks,
promenades, restaurants, shopping centres
and tranquil residential settings, whatever
the vision, Eva-Last® InfinityTM will bring it
to life. For life!
DECKING
Most cost effective profile designin two Eva-Last® technologies.
The I-series™ deck board incorporates the same low-maintenance and highly durable core and capping materials
as our most popular Eva-Last® decking technologies. Yes, the I-series™ decking profile is available in both Infinity™
capped and Eva-tech™ uncapped decking technologies. Eva-Last® ‘s advancements in extrusion now allow for complex
geometrical profiles to be shaped, these aim to minimise material volume and optimise structural performance. The
result is a revolutionary and patented profile that spans the furthest in its class.
UNCAPPEDCAPPED
THREE PROFILE OPTIONS
One sided grooved board(135 x 25.5 mm)
Grooved board(135 x 25.5 mm)
Non-grooved board(135 x 25.5 mm)
The single sided groove board optimises the uses of the board allowing for a clean and neat finish to the perimeter your deck.
Also available as a single sided groove board
Both sides grooved
Core material:Bamboo, cellular PVC
Capping material:Engineered acrylic polymer
Our latest most efficient Infinity™ profile in performance and cost!NEW
Using I-beam shaped feet, I-Series™ offers superior strength and span capabilities at a more economical price point.
It's cutting-edge Infinity™ cap and bamboo composition make I-Series™ the most attractive weather-proof, low-maintenance
composite decking profile on the market.
Best span in it’s class
This excessive performance in profile stiffness
allows to increased spans.
Reduced cost of installation in time
Greater spans reduce fixing point locations
and framing material which saves time
on site.
Drains - cannot trap water
This profile cannot trap water in any way.
Reduced cost of substructure,
fixtures and fittings
Greater spans reduce the materials and fixings required
for the substructure.
Lighter to transport
Boxed retail or online distribution gets many more
square meters per pack, due to OHS mass limits.
Grooved, double sided
deck boards
Non-grooved, double sided deck
boards
Stair tread board
Grooved, hollow, double sided
deck boards
Double sided fascia and screen
boards
OriginsTM
; a rich co-extruded collection
A co-extruded composite decking product by Eva-Last®, Origins adds value to your home and lifestyle with its
low-maintenance and high-performance features. Like the Infinity™ range, Origins utilises cutting-edge bamboo
plastic composite (BPC) to provide maximum durability. Its manufacture and capping technology make for an
incredibly strong and dependable decking board, at a more affordable price. Its 15-year warranty covers stain and
fade resistance and is perfect for any home or office.
Origins™ offers a premium solution for
vertical cladding and outdoor fencing
applications. A wide range of profile
types are available in all in all the vibrant
Origins™ colours, creating endless op-
portunity for your outdoor space.
Origins™ boards are available in grooved (for HULK clips) and non-grooved profiles with the option of solid,
arched and hollow board options. Origins™ performs at its best in residential lower traffic settings and in
vertical applications like cladding, screening and fencing.
Protective co-extruded cap
Bamboo-plastic compositecore material
EclipseTM
; the best of first generation co-extruded composite decking
EclipseTM co-extruded Eva-techTM boards, are the latest advancement in 1st generation decking. With a
concentrated formula of UV stabilisers and colourants in the cap of the board, which are made of the
identical material as the core; You can enjoy the tactile timber feel of exposed wood fibres, and the intense
uniform colour that only a co-extruded composite deck can provide.
Eclipse™ co-extruded boards offer a uniform and vibrant colour on the surface cap. With a con-
centrated formula Eclipse™ is more durable than any first generation composite decking surface.
Capping Material:Concentrated formula with UV stabilizers
Core Material:Traditional Eva-techcomposite core
DECKING
Grooved, arched, single sided
deck board
146 mm
24 mm
Length per board 5800 mm
Typical mass per metre 3.34 kgSG 1
PEBBLE
Vivid colour Tactile timber feel
Concentrated formula Non-glossy cap
Eva-tech® is our first generation material technology. The engineered cellulose-polymer composite consists primarily
of bamboo and high-density polyethylene. Additives are incorporated, enhancing the materials durability and colour-
fastness of the material. The Eva-tech® products are weather resistant and available in several natural colours.
Eva-techTM and a story of success
Colour range
NOTE: Due to printing and/or screen variations, colours in the brochure may differ slightly from the actual products.
DECKING | CLADDING | SCREENING | RAILING
ARUNA MERBAU SAVANNA PEBBLE
RUSTEAK TOPIA ASPEN XAVIA
Material:High density bamboo and polymer composite
Surface finish:Eva-techTM wide slip
resistant surface finish
Eva-tech® is an uncapped decking range introduced to the market by Eva-Last® in 2008. The instant success and
popularity of the range at the time help Eva-Last® expand and develop futher capped decking and cladding products.
Eva-tech® has truly stood the test of time with grace and resilient durability.
The Eva-techTM product
Wide decking range available
Grooved, solid, double sided
deck boards
Non-Grooved, double sided
deck boards
Grooved, arched, single sided
deck boards
Grooved, hollow, double sided
deck boards
I-series deck boards Double sided fascias andscreen boards
FASTENED, FOR LIFE.
Designed for professionals. Perfect for novices.
Eva-Last® specialised systems: Fixing
Eva-Last® has developed a range of ultra-durable fasteners, specifically designed to work with Eva-Last®
decking products, to provide the strongest fix. HULK is a range of fasteners that can be used to fasten your
Eva-Last® products onto a range of materials such as steel, timber, aluminium and composite structures.
HULK fastenersTM are nano-coated with ceramic corrosion resistant HCTO nano-coating and have been
tested and developed under some of the heaviest loads and in the most ruthless of conditions. They
use an advanced bit lock system which maximises torque transfer, assembly speed and extends the life of
your bits and screws. They are undeniably Eva-Last®’s most superior fixing solution.
FASTENED, FOR LIFE.
Basic fastener components
HULK specialised fasteners and systems work together with all Eva-Last® composite product technologies, helping to
ensure the stability and longevity of your deck. We highly recommend using the HULK fastenersTM range for every Eva-Last®
product installation. HULK fastenersTM are specially designed to securely fasten the deck boards to a substructure, but can
also be used in other wood or steel fixing applications. The coating employed for our HULK fastenersTM ensures the fixing system
supports your deck through out its lifespan.
Clip and clip screw
Top fixing screw
Trim screws
1
2
3
1 2
3
What HULK fastenersTM offer you
HULK Matched warranty guaranteed
The HULK fastenerTM range was originally designed to bring you a fastening system that offers you a warrantee that matches
your chosen Eva-Last® decking. This means that whatever warranty is promised with each Eva-Last® technology, we can
guarantee our HULK fastenerTM will last as long as your deck does.
WARRANTY
HULK bits
Every HULK package, excluding those containing Class 4 Tech screws and mini packs, contains a fastening bit for your convenience.
Carbon steel Carbon steel Carbon steel Carbon steel
TX BIT htx bit htx2 bitsocket hex
Timber clip screw Metal clip screw Timber clip screw Metal clip screw
Stainless steel (SS 430)
38 x 15 x 6 mm Timber | Metal
Material options
Dimensions Fastening into
S6 hidden deck clips
Designed for use with deck boards with a foot groove height of 6mm.
Use in conjunction with
Stainless steel (SS 430)
38 x 15 x 9 mm Timber | Metal
Material options
Dimensions Fastening into
S9 hidden deck clips
These clips are designed to be use with HULK clip screws to provide a hidden fastening system that gives a clean, neat finish to your deck installation.
Use in conjunction with
Timber clip screw
For fastening HULK hidden fasteners onto timber frames.
Use in conjunction with
Metal clip screw
For top fixing deck boards onto metal deck frames. For fastening 20 to 25 mm thick deck boards onto metal frames without having to pre-drill, unless otherwise specified by decking manufacturer. Suitable for metal structures of thicknesses between 0.8 and 2.0 mm.
Use in conjunction with
Stainless steel (SS 305)Carbon steel (C 1022)
18 - 25 screws
M4.2 x 40 mm Timber
HTX (II)
Material options Units per square metre
Dimensions Fastening into
Bit included
Hidden deck clip Hidden deck clip
Stainless steel (SS 410H)Carbon steel (C1022)
18 - 25 screws
M4.2 x 40 mm Metal
HTX (II)
Material options Units per square metre
Dimensions Fastening into
Bit included
Carbon steel (C1022) 36 - 50 screws
M5.0 x 44.5 mm Metal
TX20
Material options Units per square metre
Dimensions Fastening into
Bit included
Composite deck screw
Fastening through composite deck boards into timber. For all exterior applications, designed to leave a clean finish. Countersinking heads are coloured to match your deck leaving a super clean finish.
Stainless steel (SS305) Carbon steel (C1022)
36 - 50 screws
5.0 x 63.5 mm Timber
TX20
Available in a variety of colours to match your deck
Material options Units per square metre
Dimensions Fastening into
Bit included
Dark grey Beige Red brownDark brown Brown Light brown Light grey
Metal top fixing screw
For fastening 16 to 25 mm thick deck boards onto metal frames without having to pre-drill. Unless specified by decking manufacturer.
Available in a variety of colours to match your deck
Dark grey Beige WhiteDark brown Brown Light brown Light grey
Red brown
Stainless steel (SS 410) Stainless steel (SS 316) Carbon steel (10B21)
N/A
M5.5 x 48 mm Timber
TX25
Material options Units per square metre
Dimensions Fastening into
Bit included
Metal trim screw
The screw is specifically designed for the vertical application of thinner composite profiles ranging from 10 to 18 mm thickness onto metal structures without having to pre-drill.
Stainless steel (SS 410)Boron Carbon steel (10B21)
N/A
M5.5 x 35 mm Metal
TX25
Available in a variety of colours to match your deck
Material options Units per square metre
Dimensions Fastening into
Bit included
Timber trim screw
The screw is specifically designed for the vertical application of thinner composite profiles ranging from 10 to 16 mm thickness without having to pre-drill.
Available in a variety of colours to match your deck
SS 410 Stainless steel colours.
10B21 Boron Carbon steel colours.
Dark grey
Dark grey
BeigeDark brown Brown
Brown
Light grey
SS 410 Stainless steel colours.
10B21 Boron Carbon steel colours.
Dark grey
Dark grey
BeigeDark brown Brown
Brown
Light grey
Available in marine grade stainless steel (SS316)
Framing screw for timber
For fastening hardwood and softwood timber in a single or double level frame application.
Carbon steel (C1022)
M6.0 x 80 mm | M6.0 x 100 mm
TimberMaterial options
Dimensions
Fastening into
Framing screw for metal
Carbon steel (C1022)
M5.5 x 25 mm
MetalMaterial options
Dimensions
Fastening into
Fixes steel to steel. Fixes metal frames to metal frames. Self drilling tip, no pre-drilling needed.
I-Series boards have grooved edges and thus can be installed using the HULK hidden clip and clip screw combination. Top fixing is only necessary on perimeter (first and last) deck boards.
Grooved boards use the HULK hidden clip and screw combination, Top fixing is
only necessary on perimeter (first and last) deck boards.
Top fix with composite deck screws for non-grooved decking boards.
I-Series - Clip and screw Installation.
Deck trim installationGrooved boards - Clip and screw Installation.
Non-grooved deck board and screw installationThe distance from the edge of the board to the screw is 30 mm
Overview of HULK fastenersTM clips and screws application.
TX30
Bit required (not included)
13mm Hex bit socker driver
Tex screw bit
S9 clip
I-Series perimeter board. I-Series deck board.
Finish the edges of your decking by top
fixing trim boards.
30 mm
30 m
m
Cleaning & Care
Ease-of-maintenance. Peace-of-mind.
Eva-Last® products are truly designed for easy living, that’s why, unlike natural wood, Eva-Last®’s
composite decking is ultra-low maintenance, easy to care for and requires no costly staining, sand-
ing or sealing. Eva-Last® specialised capped technologies are some of the most highly advanced in
the construction industry, resulting in a product that is highly durable and needs almost no upkeep.
All your Eva-Last® deck needs to have a long and
beautiful life is the occasional sweep with a hard-
bristled broom or a wash with a high pressure hose.
Eva-Last® products have anti-microbial properties
also make it germ resistant and completely hygienic
for the whole family.
For more detailed information on how to simply care
for your Eva-Last® deck, download our Cleaning &
Care Guide at www.eva-last.com
www.eva-last.com
Pollution free, no greenhouse gases emitted.
CHOOSE SUSTAINABLE
DECKING
RENEWABLE RESOURCES & RENEWABLE ENERGY.
We believe that how we manufacture is just as important as what we manufacture when
it comes to going green. That’s why we’ve traded in fossil fuels for renewable energy. Our
products are now manufactured using solar power. We are fully committed to
bringing you a product that’s holistically eco-conscious.
Made from recycled materials
No trees felled
No further treatment or toxic chemicals required
Made using solar energy
Reduced impact on landfills(Recyclable)
Reduced carbon footprint
Each Eva-Last® range pairs recycled raw ingredients with bamboo for a stronger, more
sustainable composite. Bamboo rejuvenates over 30 times faster than traditional hardwoods
and it releases 35% more oxygen into our air. Eva-Last® is internationally recognised for our
commitment to the environment. We’re proud of the work we do to promote environmental
sustainability, and invite you to choose timber alternatives that are gentle on the Earth.
Registered product of the Green Building Council of South Africa
Email: [email protected]: +85 25 808 5722
Hong Kong officeTel: +85 25 808 5722Address: Room 1203, 12/F Tower 333 Canton Road, Tsimshatsui, Hong Kong, China
South Africa officeTel: +27 (0) 10 593 9222 Address: Plot 84 Short StreetRietfontein, Muldersdrift Johannesburg 1747South Africa
