CONSTRUCTION ENGINEERING AND TECHNOLOGY (KCS 3272) MINI PROJECT FAEZ NOR AZLIN BINTI SHAZALEE 4134003291 MOHD SHAFIQ BIN MUSTAPA 4133002241 MUHAMAD HAFIZUDDIN BIN MUSTAFA

CONSTRUCTION ENGINEERING AND TECHNOLOGY(KCS 3272)MINI PROJECT

FAEZ NOR AZLIN BINTI SHAZALEE4134003291MOHD SHAFIQ BIN MUSTAPA4133002241MUHAMAD HAFIZUDDIN BIN MUSTAFA;;SITE VISITThe purpose of this site visit is to get more information about this subject. Besides that, we want to learn the realize condition compare than our theoretical in the class. Others than that, we want to know how the management project at site, advantages and disadvantages instruments of what they have applied. We also want to learn about functional and method of structural.

SITE VISITmore the purpose of this site visit is to provide us with sound knowledge on how the project management being handled throughout the whole project. The understanding of the project management practice can be a good basis for us in order for attaining perceptive of project management in real life situation. Furthermore, this site visit can assist the us about knowledge for the preparation of our future career.SITE VISIT LOCATION

GENERAL INFO OF PROJECT

Project Title:Cadangan Membina Dan Menyiapkan Kerja Kompleks Islam Daerah Kuala Selangor, Selangor Darul EhsanContract Value: RM 21, 815,930.85Contract Period: 18 Months Commencement Date : 26 March 2013 Submission Date Site: 22 Sptember 2014 Physical Progress: Ahead (85%) As per 31 March 2011 Client: Jabatan Agama Islam Selangor.Architect: Department of Architect JKR Selangor Contractor: RJ Cergas Maju Sdn BhdTypes of Project: Building

LABOUR TIMEWorking day (Monday Friday)Working Time (8.30am 5pm)

METHOD OF CONSTRUCTIONConventionalComponent of the building that is prefabricated on site through the process of timber or plywood formwork installation, steel reinforcement and cast in-situ. Conventional buildings are mostly built of reinforced concrete frames. The traditional construction method uses wooden formwork. It is much more costly for construction which includes labor, raw material, transportation and low speed of construction time.

construction propertiesuse spun pile; deep foundation systems

Mostly use steel scaffolding, some scaffolds use tubes made up of a mixture of materials

FORMWORKThey are using Steel Formwork for this construction.In this construction they use steel truss because it more strong (light weight truss) from others.

SITE & SOIL CONDITION

At past, this site is formerly used for housing/quarters, before it being demolish.The soil is clay and they fill the soil with the sandy soil at the surface.

MACHINERY

Not to much observed as we visit at the finishing stage.We saw some excavator, of backhoe type at the site doing some site cleaning and excavating land near the building.They also may have used some piling machinery during installing spun pileTEST

During early stage for this construction they make a simple test or test in-situSlump test -The slump test is a means of assessing the consistency of fresh concrete. It is used, indirectly, as a means of checking that the correct amount of water has been added to the mix.

Figure: Slump Test

Cube Test

Concrete cubes test are made on site to check that the strength of the concrete is above the minimum strength which has been specified.

CONCLUSION

From the site visit, we got;exposed to the how technology are being using in construction project at the site.The fact about the project information, the party involves, material used, site specification, machinery use, labors and skills used.understood about importance of safety and notes that should be taken before entering to a construction site for the accidents that may happen there. learning about basic process of construction by observing a real example of working space, plus observing and comparing topics that taught by lecturers .learnt many things by identifying different types of construction materials and their uses, and also learning a lot about construction process and methods that are used in Malaysia