24.01.17
Swiss Can Machinery AGV-matic Can Line for 60 cpm
Semi-automatic depalletizer
- Forklift with extended throw- Level compensation elevator- Wide conveyor CBW 1170-1500- Wide conveyor CBW 1170-1000- Rotary Table Feeder RTF 1100
24.01.17
Swiss Can Machinery AGV-matic Can Line for 60 cpm
Empty Can Cleaning ECC 153-3000
- Turning upside down and cleaning of empty cans with cleaned compressed air
- 2 compressed air nozzles: 1 x permanent, 1 x intermittent
- Clean compressed air to blow out cans –odourless and residue-free cleaning air with 0.01 µ particle filter and activated carbon filter
24.01.17
Swiss Can Machinery AGV-matic Can Line for 60 cpm
Empty Can Cleaning ECC 153-3000
- Air ionizing against static loading as option- Rotation of empty can during cleaning- Separate compact deduster with filters, dust
box etc.- Speed control for can conveyor- Energy-saving, FI optimized asynchron motor
with 47 Nm output torque with PROFINET connection to main control
24.01.17
Swiss Can Machinery AGV-matic Can Line for 60 cpm
Empty Can Disinfection UV 153-3000
- 8 UVC tubes with individual surveillance- Warning previous to the end of the UVC tubes
durability (to order new ones on time)- Machine stop at damage or exceeding of the
durability of the UVC tubes- UVC tubes with shatter protection, HACCP
compliant- Very easy accessibility for maintenance works
24.01.17
Swiss Can Machinery AGV-matic Can Line for 60 cpm
Empty Can Disinfection UV 153-3000
- Stainless steel, low-maintenance construction with easy changeable belts
- Speed control for can conveyor- Energy-saving, FI optimized asynchron motor
with 47 Nm output torque with PROFINET connection to main control
- > 99 % (log2) bacterias killed (microbiological base with “Bacillus subtilis SA (DSM 4181)”
24.01.17
Swiss Can Machinery AGV-matic Can Line for 60 cpm
Spoon Dispenser
- Stainless steel, low-maintenance construction with easy changeable belts
- Speed control for can conveyor- Energy-saving, FI optimized asynchron motor
with 47 Nm output torque with PROFINET connection to main control
24.01.17
Swiss Can Machinery AGV-matic Can Line for 60 cpm
Spoon Dispenser
- Can separating device- Spoon feeder with spoon separating device- Vibration hopper for spoons with additional bowl- Can stops – spoon falls in – Can will be released- If there is any interruption (no spoon, spoon not
thrown inside can), the machine will stop and give a signal
24.01.17
Swiss Can Machinery AGV-matic Can Line for 60 cpm
Can Filling and Check-Weighing machine matic 127 Twin FC
- Stainless steel, low-maintenance construction- Dosing with highly precise servo drive with control to
automatically process the data of the subsequent check weigher with feedback control
- Feeding of filling powder via horizontal auger with level control
24.01.17
Swiss Can Machinery AGV-matic Can Line for 60 cpm
Can Filling and Check-Weighing machine matic 127 Twin FC
- All parts in immediate contact with the filling powder are in stainless steel, gaskets are FDA certified
- Automatic FI optimized asynchron motors for horizontal auger and agitator
24.01.17
Swiss Can Machinery AGV-matic Can Line for 60 cpm
3 x V-matic 127-3
- Max. can-Ø 127 mm – compatible with different can-Ø und heights
- Can height easy adjustable via HMI (Touchscreen)- Stainless steel, low-maintenance construction- Indexing turret gear with Hybrid drive (max. 220
Nm) and und positioning accuracy ± 65“
24.01.17
Swiss Can Machinery AGV-matic Can Line for 60 cpm
3 x V-matic 127-3
- Evacuating, gassing and seaming, all in one station!- Adjustable pressure inside can, controlled by pressure
sensor (i.e. 850 mbar)- < 0.5 % O2 inside can possible- Completely new updated heads for 2015!
24.01.17
Swiss Can Machinery AGV-matic Can Line for 60 cpm
3 x V-matic 127-3
NEW IN 2015!- Servomotor for Seaming- New hygienic design for better cleaning- New Machine Frame (Stainless)- New Base Plate (stainless)- New ultrasonic sensors
24.01.17
Swiss Can Machinery AGV-matic Can Line for 60 cpm
Capper C127 with SC 127
- Max. cap-Ø 127 mm – compatible with different cap-Ø- Slope Conveyor stainless steel with FI asynchron motor and continuosly
variable speed- Stainless steel, low-maintenance construction with easy changeable belt- Energy-saving, FI optimized async. motor (0.55 kW, 120 Hz, 47 Nm)- Congestion control with automatic machine start and stop- Automatic discharching of wrongly positioned lids
24.01.17
Swiss Can Machinery AGV-matic Can Line for 60 cpm
Capper C127 with SC 127
- New designed capping system- 2 servomotors synchronized with main belt- Side conveyors to guide the cans- 2 adjustable rolls to push lid onto can- Easy to change format
24.01.17
OPTION: Lid destacker LD 127
- Fully automatic lid destacker with stainless steel lid conveyor with FI asynchron motor and continuosly variable speed
- Variable overall length
Swiss Can Machinery AGV-matic Can Line for 60 cpm
24.01.17
Swiss Can Machinery AGV-matic Can Line for 60 cpm
OPTION: Lid disinfection UV 127
- 4 UVC tubes with individual surveillance- Warning previous to the end of the UVC tubes
durability (to order new ones on time)- Machine stop at damage or exceeding of the
durability of the UVC tubes- UVC tubes with shatter protection, HACCP
compliant