Phone: 1‐800-878-4648 Page 1 of 22 Fax: 1‐781-932-6695 PRICE LIST ‐ USD FUNDS Effective October 6, 2017 TERMS AND CONDITIONS Pricing: 50% of funds payable when ordering machines. Balance payable on advice of ready to ship. MasterCard, VISA American Express accepted. Plus applicable sales tax. Prices subject to change without notice. Errors and Omissions excepted. Freight: All shipments are F.O.B. our plant. Repairs: All shipments are F.O.B. from our plant. Return authorization numbers must be obtained by Blademaster Customer Service. All products must be shipped freight prepaid, whether within the warranty period or not. Products should be sent to Blademaster or authorized service depot. Warranty: Goods are warranted to be free from defects in materials or workmanship for a period of one year from date of purchase providing such goods have not been subject to misapplication, misuse, negligence, or repairs from an unauthorized person. Any equipment proving defective within the warranty period will be repaired free of charge F.O.B. Chatham or authorized service depot. Returned Merchandise: Returned merchandise will not be accepted for credit unless permission for the return has been obtained. Return authorization numbers must be obtained from Blademaster Customer Service. All returned merchandise is subject to a 20% handling and repackaging charge. Price paid or current price, whichever is lower will be the basis for credit. All returns, including equipment sent to the factory for repairs, must have transportation prepaid. Unauthorized returns at shippers own risk. Skate Sharpening Machine Electrical Specifications: All standard motors are 110 volts, 60 cycle, single phase. On special orders – 220 volts, 50 cycle, single‐phase motors are available. Portable and bench model machines may be plugged into standard 110V outlet. Machines with more than one motor must be supplied with a properly rated 2 pole circuit breaker ahead of machine. Single Station machines require a 30A, 110V, single phase, 3‐wire supply – 1 X 110V line, 1 common line & 1 ground line. Double / Triple Station machines require a 20A, 220V, single phase, 4‐wire supply ‐ 2 X 110V lines, 1 common line & 1 ground line.
Transcript
Phone: 1‐800-878-4648
Page 1 of 22 Fax: 1‐781-932-6695
PRICE LIST ‐ USD FUNDS Effective October 6, 2017
TERMS AND CONDITIONS
Pricing:
50% of funds payable when ordering machines. Balance payable on advice of ready to ship.
MasterCard, VISA American Express accepted. Plus applicable sales tax.
Prices subject to change without notice. Errors and Omissions excepted.
Freight: All shipments are F.O.B. our plant.
Repairs: All shipments are F.O.B. from our plant. Return authorization numbers must be obtained by Blademaster Customer Service. All products must be shipped freight prepaid, whether within the warranty period or not. Products should be sent to Blademaster or authorized service depot.
Warranty: Goods are warranted to be free from defects in materials or workmanship for a period of one year from date of purchase providing such goods have not been subject to misapplication, misuse, negligence, or repairs from an unauthorized person. Any equipment proving defective within the warranty period will be repaired free of charge F.O.B. Chatham or authorized service depot.
Returned Merchandise: Returned merchandise will not be accepted for credit unless permission for the return has been obtained. Return authorization numbers must be obtained from Blademaster Customer Service. All returned merchandise is subject to a 20% handling and repackaging charge. Price paid or current price, whichever is lower will be the basis for credit. All returns, including equipment sent to the factory for repairs, must have transportation prepaid. Unauthorized returns at shippers own risk.
Skate Sharpening Machine Electrical Specifications: All standard motors are 110 volts, 60 cycle, single phase. On special orders – 220 volts, 50 cycle, single‐phase motors are available. Portable and bench model machines may be plugged into standard 110V outlet. Machines with more than one motor must be supplied with a properly rated 2 pole circuit breaker
ahead of machine.
Single Station machines require a 30A, 110V, single phase, 3‐wire supply – 1 X 110V line, 1 common line & 1 ground line.
Double / Triple Station machines require a 20A, 220V, single phase, 4‐wire supply ‐ 2 X 110V lines, 1 common line & 1 ground line.
Largest work surface in the industry (available in granite, steel, or Teflon-coated). Dual variable- speed finishing heads ensure optimal cutting action and a perfect finish on the blade. New 5th generation exhaust system includes a redesigned impeller and industry-unique valves that automatically direct airflow to the active heads. As a result, suction is dramatically improved and noise levels have been cut in half compared to what was already the quietest system on the market. New high-capacity grit bucket and cartridge filter design virtually eliminates the possibility for installation errors and simplifies routine maintenance. Light fixtures shifted towards the front of the hood and Lexan windows in the top help illuminate the sharpening operation. Cabinet includes additional shelving for storage of accessories and commonly used tools. Rear access panels in the hood and dual sweep trays are standard. Also includes built-in cross grind dresser, low profile casters, scratch resistant lexan™ shield, service filter indicator light, keyed lockout, safety glasses, Blademaster banner, sweep tray & vacuum hose. Accepts the Mark 6 or Mark 5 Custom Radius System. H-54”, W- 30.5”, L- 65” (With dual sweep trays 71”). Weight 1,110 lbs.
APEXHOOD OPTIONAL "APEX" HOOD $1,815.00 5
Optional on all PLA3-series machines. The new "APEX" hood includes HI-FI audio complete with CD player, Bluetooth, USB, and subwoofer support (active or passive). New hi-intensity LED lighting and retractable Lexan shields.
Same as PLATINUM machine (PLA5VSV), but with a steel tabletop and without variable speed control. H-54", W-30.5", L-65" (With dual sweep trays 71"). Weight 1,110 lbs.
Built-in quiet exhaust system. 3 station machine with 2 finishing stations & 1 direct drive cross grind station. Comes with 1 cross grind dresser (CGD700), low profile casters, scratch resistant lexan™ shield, 1 pair safety glasses, Blademaster banner, service filter indicator light, sweep tray & vacuum hose. Built to accept Mark 6 or Mark 5 Custom Radius System. Easy to use front feed system with integrated linear bearings. H- 52”, W-27½”, L- 48½” (With sweep tray - 54½”) Weight 750lbs.
Built-in quiet exhaust system. 2 station machine with 1 finishing station & 1 direct drive cross grind station. 20 percent smaller foot print than the 3 station machine. Comes with 1 cross grind dresser (CGD700), low profile casters, scratch resistant lexan™ shield, 1 pair safety glasses, Blademaster banner, service filter indicator light, sweep tray & vacuum hose. Built to accept new generation Mark6 Custom Radius System. New easy to use front feed system with integrated linear bearings. H-52”, W-27½”, L-40½” (With sweep tray - Length 46½”) Weight 720lbs.
Designed for entry level skate sharpening shops that require the versatility of this multi-purpose machine with built-in filtered exhaust system. Has a combination finishing & cross grind head station. It has a convenient front feed system & comes complete with diamond dresser, low profile casters, tommy bar, wheel wrench, safety glasses, sweep tray, vacuum hose & 8” grinding wheel so you are ready to sharpen skates immediately. Can be ordered with optional CRM6 Custom Radius Contouring System. Requires 30 amp service. H-51¼”, W-25½”, L-30½” (with sweep tray) Weight 380lbs.
BRC500 HOOD ASSEMBLY FOR BRCEX1 $373.00 9
BREXCG1 CROSSGRIND STATION W/EXHAUST $5,100.00
BREXD1 DETAIL MACHINE WITH EXHAUST $5,100.00
WHEEL DRESSING SYSTEMS
MPFD300 MULTI PURPOSE FORM DRESSER $1,138.00 10
Feed system and magnet. Rolls not included.
CGD500 CROSS GRIND DRESSER $186.00 37
For all types of Blademaster Cross Grind Heads.
Phone: 1‐800-878-4648
Page 3 of 22 Fax: 1‐781-932-6695
PRICE LIST ‐ USD FUNDS Effective October 6, 2017
ITEM DESCRIPTION PRICE PAGE
WHEEL DRESSING SYSTEMS
CGD700A CROSS GRIND DRESSER ASSEMBLY KIT $353.00
Attachment for Direct Drive Cross Grind Head only.
Form Dressing Rolls ‐ Conventional Radius:
BFR0312D3 DIAMOND ROLL ‐ 5/16" $152.00 10
BFR0375D3 DIAMOND ROLL ‐ 3/8" $152.00 10
BFR0437D3 DIAMOND ROLL ‐ 7/16" $152.00 10
BFR0500D3 DIAMOND ROLL ‐ 1/2" $152.00 10
BFR0562D3 DIAMOND ROLL ‐ 9/16" $152.00 10
BFR0625D3 DIAMOND ROLL ‐ 5/8" $152.00 10
BFR0687D3 DIAMOND ROLL ‐ 11/16" $152.00 10
BFR0750D3 DIAMOND ROLL ‐ 3/4" $152.00 10
BFR0875D3 DIAMOND ROLL ‐ 7/8" $152.00 10
BFR1000D3 DIAMOND ROLL ‐ 1" $152.00 10
BFR1125D3 DIAMOND ROLL ‐ 1‐1/8" $152.00 10
BFR1250D3 DIAMOND ROLL ‐ 1‐1/4" $152.00 10
BFR1500D3 DIAMOND ROLL ‐ 1‐1/2" $152.00 10
Form Dressing Rolls ‐ Flat Bottom:
BFRX5D3 X5 FORM DRESSING ROLL $152.00 10
BFRX6D3 X6 FORM DRESSING ROLL $152.00 10
BFRX7D3 X7 FORM DRESSING ROLL $152.00 10
BFRX8D3 X8 FORM DRESSING ROLL $152.00 10
BFRX9D3 X9 FORM DRESSING ROLL $152.00 10
BFRGX6D3 GX6 FORM DRESSING ROLL (GOALIE / FIGURE) $152.00 10
BFRGX7D3 GX7 FORM DRESSING ROLL (GOALIE / FIGURE) $152.00 10
BFRGX8D3 GX8 FORM DRESSING ROLL (GOALIE / FIGURE) $152.00 10
DUST COLLECTION AND AIR FILTRATION SYSTEMS
RE1 REMOTE EXHAUST $6,984.00 11
The cleanest, quietest exhaust on the market. Works with genuine single or multiple Blademaster skate sharpening machines. Rugged industrial grade equipment. Virtually maintenance free and easy to install. Floor Size H-79”, W-47”, L-41” – Shipping Weight 310 lbs.
RE3 PORTABLE EXHAUST SYSTEM $3,595.00 12
800 CFM Ultra Quiet Exhaust System. Designed for the Locker Room and Entry Level Retailer. Dual adjustable scoop design to accommodate two sharpening machines at the same time. Durable rubber work surface and heavy duty casters for easy storage and movement. A disposable pleated filter element with fire retardant coating carries a MERV 11 efficiency rating and captures >95% of 1-3 micron contaminants. Table working height of 34¾” (48½” – 53” top of adjustable scoops). W – 37¼”, D – 23”. Weight 202 lbs.
RE3410A ADJUSTABLE INLET SCOOP $337.00 12
Adjustable inlet scoop for RE3 portable exhaust units. This 5" diameter fire retardant scoop provides 100% flexibility and ease of adjustment for the operator.
Phone: 1‐800-878-4648
Page 4 of 22 Fax: 1‐781-932-6695
PRICE LIST ‐ USD FUNDS Effective October 6, 2017
ITEM DESCRIPTION PRICE PAGE
DUST COLLECTION AND AIR FILTRATION SYSTEMS
SC9500 CART ASSEMBLY $390.00 12
Optional Cart for RE3 to support second sharpening station.
PLA580A PASS‐THROUGH SCOOP ASSEMBLY $26.00
PORTABLE MACHINES
XFCP C KIT FOR BLADEMASTER PORTABLE SKATE SHARPENERS $199.00 13
Comes with 1 8MXRUBY finishing wheel, 1 BR100 skate gauge, 1 pack of honing stones, 1 bottle of Gusto Glide, 1 bottle of Slick-it, 1 replacement diamond, 1 Blademaster towel, 1 grit removal brush & 1 Blademaster apron. Weight 4 lbs.
BRPPRO2 PRO SERIES VARIABLE SPEED SKATE SHARPENER (TRAVEL MODEL) $4,125.00 13
Industry exclusive Variable Speed Portable Skate Sharpener. Large table area and upgraded heavy-duty motor for easier skate sharpening. Lightweight and includes dressing system with linear bearings. Full stone use right down to the blotter (4.5”). It has a convenient enclosed front feed system & comes complete with diamond dresser, tommy bar, wheel wrench, 1 pair safety glasses and 8” grinding wheel so you are ready to sharpen skates immediately. The sharpener comes in its own durable travel case with pullout handle and travel wheels. H-18½”, W-20 ¾”, L-20” - Weight 80lbs.
BRPPRO2B PRO SERIES VARIABLE SPEED SKATE SHARPENER (BENCH MODEL) $3,300.00 13
Same as BRPPRO2, without carrying case. H-12”, W-20”, L-18½”-Weight 60lbs.
SH8000 PRO SERIES PORTABLE SKATE HOLDER $695.00 13
Ideal for Travel. Portable and lightweight Pro Series skate holder for travelling teams where size and weight are a concern. Weight 4.75 lbs.
Pro Series combination portable skate sharpener has a large table area for easier skate sharpening. Has a combination finishing & cross grind head station. It has a convenient front feed system & comes complete with diamond dresser, tommy bar, wheel wrench, 1 pair safety glasses & 8” grinding wheel so you are ready to sharpen skates immediately. Inlet ports & ducting to accept customer exhaust vacuum. Built to accept Mark 6 Custom Radius System. The sharpener comes in its own durable travel case with pullout handle & travel wheels. H-18½”, W-20 ¾”, L-20” – Weight 98½ lbs.
Same as BRC2005, without carrying case or skate holder. H-12”, W-20”, L-18½” - Weight 80 lbs.
SPB851 SKATE SHARPENER WITH HOLDER (TRAVEL MODEL) $2,190.00 15
Portable Skate Sharpening Machine that sits on table or bench. Comes with grinding wheel, radius arm, diamond and quill, tommy bar, 1 pair safety glasses & wheel wrench. Comes complete with one SH2000 skate holder in its own durable travel case with pullout handle & travel wheels. H- 14½”, W- 20½”, L- 22” - Weight 112 lbs.
SPB850 SKATE SHARPENER WITH HOLDER (BENCH MODEL) $1,095.00 15
Portable Skate Sharpening Machine that sits on table or bench. Comes with grinding wheel, radius arm, diamond and quill, tommy bar, wheel wrench and 1 pair safety glasses. Includes an SH2000 skate holder. Carrying case sold separately. H-11”, W-19”, L-17½” - Weight 70 lbs.
Same as the SPB850 bench model portable machine, but comes with an 88R grinding wheel and our SH6500 skate holder specifically designed for figure skates. H-11”, W-19”, L-17½” - Weight 70 lbs.
Quantities of 6: $10.34 3DW DETAIL WHEEL 3 X 1/4 X 3/8 $10.00 17
Quantities of 6: $9.40 3BW BUFFING WHEEL $17.00 17
Quantities of 6: $15.90 PP100 PICK PROTECTOR $13.00 17
SH6500 SPECIAL PURPOSE SKATE HOLDER (FIGURE) $625.00 17
Ideal for Figure Skates. The SH6500 holds side honed figure blades in the holder by clamping the blade by the stanchions, ensuring square edges. The aluminum clamp and anvil provide mar-free clamping. Weight 7 lbs.
Fast and accurate gauge for checking edge squareness without removing the skate from the holder!
BR1001 MAGNETIC REPLACEMENT ANGLE FOR BR 100 AND BR1000 $20.00 18
BR100 PRO‐SQUARE $105.00 19
Pro Series Blade Squareness Checker
BHC2005 HEIGHT COMPARATOR $674.00 19
Engineered to help produce exact skate blade edges.
HDI100 HOLLOW DEPTH INDICATOR $410.00 19
Measuring tool that indicates the precise depth of hollow & edge balance.
BR33 NYLON THUMB SCREW ‐ 1/4‐20 X 1/2 $2.00 19
For BR100 and BR200.
BR201 MAGNETIC REPLACEMENT ANGLE FOR BR200 SKATE GAUGE $16.00
HDI110 DIAL INDICATOR $217.00
BOOT EXPANDER TOOLS AND ACCESSORIES
BE02111 BOOT EXPANDER WITH ACCESSORIES
This mini-hydraulic pump is a versatile tool that stretches length as well as width, works well for $606.00 20
inline and ice skates. BE02106 EXTENSION & RINGS $74.00 20
BE02107 MICRO TOE ADJUSTER $99.00 20
BE02108 SET OF TOE PIECES $104.00 20
BE02109 MUSHROOMS (SET OF 5) $89.00 20
BE02110 BOOT EXPANDER PUMP WITH HOSE ASSEMBLY $337.00 20
BE02106115 RINGS FOR EXTENSION (SET OF 5) $11.00 20
Phone: 1‐800-878-4648
Page 6 of 22 Fax: 1‐781-932-6695
PRICE LIST ‐ USD FUNDS Effective October 6, 2017
ITEM DESCRIPTION PRICE PAGE
BOOT EXPANDER TOOLS AND ACCESSORIES
BE02400 WALKER SPOT PRESS WITH ACCESSORIES $699.00 20
Easy to use tool, allows you to really customize all types of footwear. Designed to get into hard to reach spots, & works with or without our Boot Expander.
BE02145 WALKER SPOT PRESS ATTACHMENTS $114.00 20
BE02420 BOOT EXPANDER ADAPTERS (SET OF 2) $37.00 20
BE02150 HEEL BLOCK ‐ SMALL WITH BUTTON $72.00 20
Designed to widen the heel area and eliminate the need to grind and weaken the boot, also maintains the heel shape when stretching for length.
BE02301 FOREFOOT EXPANDER ‐ LARGE ‐ XL $326.00 20
Designed to offer 3-dimensional expansion of the Forefoot when used in conjunction with the Boot Expander.
BE02295 FOREFOOT EXPANDER ‐ MEDIUM $351.00 20
BE02290 FOREFOOT EXPANDER ‐ SMALL $310.00 20
BE02285 FOREFOOT EXPANDER ‐ EXTRA SMALL $310.00 20
This tool can be used to do work on the toe box of hockey skates, shoes and small ski boots.
BE02200 THIRD HAND $213.00 20
Holds two boot expanders, & has a handy place to store accessories. Bolts directly to your workbench so you can work easily on two boots at once. Keeps bench clean for maximum efficiency (tools not included).
BE02120 BOOT EXPANDER WITHOUT HOSE $357.00 20
Designed to work with the Walker Press & for those times when you don’t need the length of the hose.
BE02125 FOREFOOT WEDGE ASSEMBLY $130.00 20
Designed to prevent the top of the boot from collapsing during stretching.
BE02130 HEEL BLOCK ASSEMBLY ‐ LARGE $72.00 20
Designed to widen the heel area and eliminate the need to grind & weaken the boot. It also maintains the heel shape when stretching for length.
BE02135 MICRO TOE EXPANDER SET $175.00 20
Designed to precisely stretch problem toe areas.
BE02302 BLOCKS (SET OF 3) $42.00 20
Large, Medium & Small.
SKATE AND GLOVE DRYING EQUIPMENT
SC8500 PRO SERIES GLOVE AND BOOT DRYER $4,500.00 21
Dries up to 12 pairs of skates or gloves in approx 5 minutes. Stainless steel arms & hangers. Heavy duty casters, high temp safety switch. H-43½”, W-20”, L-40“. Weight 244 lbs.
SC7600 PORTABLE HIGH TEMP GLOVE AND BOOT DRYER $2,500.00 21
Dries up to 6 pairs of skates or gloves. Stainless steel arms & hangers. Higher heat & more blower output than before. H-30½”, W-19”, L-15¾“. Weight 68 lbs.
CONTOURING
CRM6KIT COMPLETE CONTOURING KIT $2,600.00 2
May be purchased with new tabletop sharpening machines (PLA3VSV, BR2006VSV, BRHYB1, BRLEG1FSF, BRINFFS, BRCEX1) or BRC2005/BRC2005B portables. Contains the CRM6 Single Point Custom Radius Contouring System, as well as 1 BHC2005 Height Comparator Gauge, 1 CBCTG1 Customer Radius Contour Gauge, 1 BR100 Skate Gauge, 6 8MXRUBY Wheels, 6 8GC Wheels, 1 pack of TSM4004 Honing Stones, 1 TSM4030 Gusto Glide, 1 TSM404 Slick-It, 1 SC9100 Grit Removal Brush, 1 TSM710 Apron, 1 TSM700 Towel, and 1 TSM9001 Window Decal. U.S. Pat. 8,430,723. Weight 100 lbs.
Easily measure the profile/contour on existing skate blades. Four-sided tool has a side for each common radius (7', 9', 11', and 13').
CRBG CUSTOM RADIUS BOOT GAUGE $413.00 23
Can be used with all Blademaster machines with Cross Grind Stations. Weight 20lbs.
CSC1110 BOOT GAUGE STICKER (SCALE) $7.00
Contour Bars ‐ Mark 6:
CBCCUSTOM CUSTOM CBC CONTOUR BAR
Blademaster can make a customized contour bar to your specifications. Please inquire. $130.00 23
CBC0007 CONTOUR BAR CRM6 ‐ 7 FT $115.00 23
CBC0009 CONTOUR BAR CRM6 ‐ 9 FT $115.00 23
CBC0010 CONTOUR BAR CRM6 ‐ 10 FT $115.00 23
CBC0011 CONTOUR BAR CRM6 ‐ 11 FT $115.00 23
CBC0013 CONTOUR BAR CRM6 ‐ 13 FT $115.00 23
CBC0028 CONTOUR BAR CRM6 ‐ 28 FT $115.00 23
CBC0910 CONTOUR BAR CRM6 ‐ 9 FT & 10 FT $115.00 23
CBC0910F2 CONTOUR BAR CRM6 ‐ 9 FT/10 FT/2 IN. FLAT $115.00 23
CBC0911 CONTOUR BAR CRM6 ‐ 9 FT & 11 FT $115.00 23
CBC1011 CONTOUR BAR CRM6 ‐ 10 FT & 11 FT $115.00 23
CBC1011F2 CONTOUR BAR CRM6 ‐ 10 FT/11 FT/2 IN. FLA $115.00 23
CBC1012 CONTOUR BAR CRM6 ‐ 10 FT & 12 FT $115.00 23
Custom Radius Contouring Systems:
CRM6 MARK 6 SINGLE POINT CUSTOM RADIUS CONTOURING SYSTEM $1,858.00 23
Can be used on all Blademaster 2000 series and higher machines as well as the BRC2005 portable. Comes with the Custom Radius Boot Gauge (CRBG), CRM200 contour attachment, SH3000M6 skate holder, 8 radius bars (7, 9, 11, 13, 9/10, 10/11, 9/10 with a 2 inch flat center, 10/11 with a 2 inch flat center) & contouring base plate. U.S. Pat. 8,430,723. Weight 48 lbs.
Radius Bars ‐ Mark 2&3:
CSC2009 CONTOUR BAR ‐ 7/9 FT $90.00
CSC2013 CONTOUR BAR ‐ 11/13 FT $90.00
CSC2015 CONTOUR BAR ‐ 15 FT/STR $90.00
CSC2028 CONTOUR BAR ‐ 28 FT/STR $90.00
CSC2104 CONTOUR BAR ‐ 104 FT/STR $90.00
Radius Bars ‐ Mark 5:
CVC2007 CONTOUR BAR‐7 FT. $104.00
CVC2009 CONTOUR BAR‐9 FT. $104.00
CVC2010 CONTOUR BAR‐10 FT. $104.00
CVC2011 CONTOUR BAR‐11 FT. $104.00
CVC2013 CONTOUR BAR‐13 FT. $104.00
Phone: 1‐800-878-4648
Page 8 of 22 Fax: 1‐781-932-6695
PRICE LIST ‐ USD FUNDS Effective October 6, 2017
ITEM DESCRIPTION PRICE PAGE
CONTOURING
CVC2015 CONTOUR BAR‐15 FT. $104.00
CVC2028 CONTOUR BAR‐28 FT. $104.00
CVC2104 CONTOUR BAR‐104 FT. $104.00
SKATE SERVICE EQUIPMENT
SC1500 DELUXE WORK BENCH AND SHELVING UNIT $2,225.00 24
Durable rubber work surface. Ergonomically designed for user comfort & productivity. Shipping weight 672 lbs. Measurements with accessories: H-74”, W-62”, L-36”
C.S.A. Approved. Complete with digital temperature controller and display, timer on/off switch and large enough to work with skates, ski boots, shoes, etc. Plugs into a standard outlet. Comes with a 30 minute timer and a 15 amp protection fuse. H-19”, W-15½”, L-29“. Weight 58 lbs.
SC2100 CUSTOM SERVICE CENTER $6,514.00 24
Features all the tools needed for custom skate work on hockey and figure skates. Deluxe workbench with durable rubber working surface. Ergonomically designed for user comfort & productivity. Has storage bins, 9 drawers & 2 door storage cabinet. Comes with heat oven, boot stretcher module & boot punch, blade vise and boot stand, and blade alignment jig. Riveting machine with complete sets of tools for hockey & figure skates. Eight (8) boxes of rivets, two (2) boxes of eyelets & one (1) box of hooks. Heavy duty metal construction. Height 74 ½”, Width 36 ½”, Length 60 ½”. Shipping Weight 1256 lbs.
SKATE SERVICE TOOLS
SC6000 BOOT PUNCH PRESS KIT $425.00 25
Steel construction. Includes three pairs of forming tools. Weight 17lbs.
SC6075 SMALL BOOT CLAMP KIT $35.00 25
SC6095 OBLONG CLAMP KIT $48.00 25
SC6085 LARGE BOOT CLAMP KIT $42.00 25
SC7075 SMALL FORM SET ‐ 1 DIA. $36.00 25
SC3500 SKATE VICE $208.00 25
Durable vise that mounts on any workbench. Weight 15lbs.
SC9000 RUBBING BAR ASSY $91.00 25
Includes mainframe, long post and short post attachment.
BSG1 BLADE STRAIGHTNESS GAUGE $570.00 25
Gauge checks for blade straightness to .001" accuracy. Multi-position handle placement for ease of operation. No need to remove the skate from the fixture to straighten and recheck the blade.
SC4500 BOOT STAND $114.00 25
Adjustable stand for working on all skate boots.
SR1000 SKATE RACK $776.00 25
Holds 30 pairs of skates. On casters for ease of moving. H-56”, W-48½”, L-28“ weight 232 lbs.
Phone: 1‐800-878-4648
Page 9 of 22 Fax: 1‐781-932-6695
PRICE LIST ‐ USD FUNDS Effective October 6, 2017
ITEM DESCRIPTION PRICE PAGE
SKATE SERVICE TOOLS
TSM3000 BLADE STRAIGHTENER $259.00 32
SC4000 ALIGNMENT GAUGE $181.00
SC4000A ADJUSTABLE GAUGE‐FIGURE $346.00
SC4100 ALIGNMENT GAUGE‐HOCKEY $177.00
SC4100A ADJUSTABLE GAUGE‐HOCKEY $347.00
SC4200 ALIGNMENT GAUGE‐INLINE $161.00
SC4200A ADJUSTABLEGAUGE‐INLINE $310.00
PRECISION SKATE HOLDERS
SH2000 GENERAL PURPOSE SKATE HOLDER $387.00 26
Entry level "Ultra Glide" skate holder can be used on most skate types. Traditional cam-handles provide height adjustment. Weight 8 lbs.
SH6000 PRO SERIES GENERAL PURPOSE SKATE HOLDER $675.00 26
Pro Series skate holder that originated dial-increment adjustment. Allows for precise three- dimensional adjustment. Weight 8 lbs.
SH6500 SPECIAL PURPOSE SKATE HOLDER (FIGURE) $625.00 26
Ideal for Figure Skates. The SH6500 holds side honed figure blades in the holder by clamping the blade by the stanchions, ensuring square edges. The aluminum clamp and anvil provide mar-free clamping. Weight 7 lbs.
SH7000 SPECIAL PURPOSE SKATE HOLDER (GOALIE) $625.00 26
Ideal for Goalie Skates. The SH7000 is an excellent all around holder and has a wide stirrup to accommodate skates that will not fit over a traditional clamp post. Weight 9 lbs.
SH7700 SPECIAL PURPOSE SKATE HOLDER (CHILD) $625.00 26
Ideal for Child Skates. The SH7700 multi-purpose holder has a smaller anvil to support shorter skates that will not fit over a traditional clamp post. Weight 7 lbs.
SH8000 PRO SERIES PORTABLE SKATE HOLDER $700.00 26
Ideal for Travel. Portable and lightweight Pro Series skate holder for travelling teams where size and weight are a concern. Weight 4.75 lbs.
SH6002 ELITE SERIES UPGRADE KIT $156.00
Complete kit to swap your existing SH6000 or SH8000 holder with the improved anvil and post from the SH6600/SH8800 Elite holders.
SH6600 ELITE SERIES GENERAL PURPOSE SKATE HOLDER $675.00
Same as SH6000, but with an extended-length anvil providing added support for blade-only sharpening. Also includes a modified clamp post with extra runner clearance to accommodate changing skate designs. Weight 8 lbs.
SH8800 ELITE SERIES PORTABLE SKATE HOLDER $700.00
Same as SH8000, but with an extended-length anvil providing added support for blade-only sharpening. Also includes a modified clamp post with extra runner clearance to accommodate changing skate designs. Weight 4.75 lbs.
RIVETING EQUIPMENT
Phone: 1‐800-878-4648
Page 10 of 22 Fax: 1‐781-932-6695
PRICE LIST ‐ USD FUNDS Effective October 6, 2017
ITEM DESCRIPTION PRICE PAGE
RIVETING EQUIPMENT
TSM811T SKATE RIVETER $777.00 27
Hand operated riveter. Comes complete with sets & dies for removing steel rivets & installation of both steel & copper rivets. Includes the TSM711CRR Copper Rivet Removal Tool & 1 pair safety glasses. Weight 42lbs.
811PR POWER RIVETER $2,686.00 27
Powered by a pneumatic pump. Comes complete with sets of pockets, point tools & drive pin for the removal or installation of steel & copper rivets & 1 pair safety glasses. Weight 92 lbs.
811BK BASE ACCESSORY KIT $119.00 27
Base Kit includes: 711DB Drill Bit and 711TB Torque Bar. Steel Rivets - 711916SR 9/16”, 7111016SR 10/16”, 7111116SR 11/16”, 7111216SR 12/16”, 7111316SR 13/16”, 7111516SR 15/16” Copper Rivets - 7111250CR 1-1/4”
811CK COMPLETE ACCESSORY KIT $774.00 27
Complete Package includes: 711DB Drill Bit, 711TB Torque Bar, 71125P 6 Point Punch Plier, 7113PA 3 Piece Adapter Set, 711404B Eyelets, 711404 Eyelet Installation Tools, 71194HC Large Hook Installation Point, 7112HA Hook Installation Tools, 71194HW Large White Hooks, 71119 Small Buckle Installation Tools, 71120 Large Buckle Installation Tools, 71121 Small Buckle Removal Tools, 71122 Frame Rivet Installation Tools, 711HR Hinge Rivet Set & 711409W Hooks. Steel Rivets - 711916SR 9/16”, 7111016SR 10/16”, 7111116SR 11/16”, 7111216SR 12/16”, 7111316SR 13/16”, 7111516SR 15/16”. Copper Rivets - 7111250CR 1-1/4”
TSM811B RIVETER CASE & UTILITY BOX $674.00 27
For Blademaster & BATTCO bench riveters. Durable travel case with telescopic pullout handle & heavy duty travel wheels. Includes interior storage case for tooling, parts, rivets, etc.
IB1000CRM6E BLADEMASTER CRM6 VINYL BANNER ‐ ENGLISH $30.00
HAND HONES AND CLEANERS
TSM4065 BLADEMASTER DEOD. & SANITIZ. 250 ML $6.00 35
TSM4060 ANTI‐STATIC SPRAY $11.00 35
TSM4050 GRANITE GLAZE $25.00 35
TSM4040 SLICK‐IT $26.00 35
TSM5004 RECTANGULAR DEBURRING STONE 4/PKG $21.00 35
TSM4000 PKG'D HAND HONE TEAR DROP $5.00 35
TSM4004 TEAR DROP HAND HONES 4/PKG $16.00 35
TSM4030 GUSTO GLIDE $14.00 35
TSM4032 0/S MOHAIR DAUBER $2.00 35
TSM4504 COMBO GRIT COARSE/FINE CRYSTOLON STONE $25.00 35
Phone: 1‐519‐352‐4550 Page 20 of 22 Fax: 1‐519‐352‐7676
PRICE LIST ‐ USD FUNDS Effective October 6, 2017
ITEM DESCRIPTION PRICE PAGE
HAND HONES AND CLEANERS
TSM4025 SLIK STIK (PKG.OF 5) $19.00 35
TSM4010 BLADE POLISHING COMPOUND $6.00 35
SC9100 BRUSH $6.00 35
TSM2125 MEDIUM INDIA FLAT FILE $10.00 35
New “trainers” professional grade india deburring stone. This medium grit stone is the ideal choice for removing burrs from the edges of the skate and for quick edge repair between sharpenings. The medium grit abrasive will leave a smooth, honed finish on the sides of the blade.
TSM4200 PKG'D HAND HONE TEAR DROP $16.00 35
TSM4204 TEAR DROP HAND HONES 4/PKG $52.00 35
TSM4501 RECTANGULAR HAND HONE $8.00
TSM5001 RECTANGULAR HAND HONE $6.00
FILTERS AND GLIDE PADS
TSM6360 FILTER CARTRIDGE ‐ PAPER FILTER ELEMENT $167.00 36
TSM6380 FILTER CARTRIDGE ‐ LONG LIFE $234.00 36
DH6360 FILTER CARTRIDGE ‐ PAPER FILTER ELEMENT $155.00 36
11502 DUST BAG 16‐1/2 IN. X 72 IN. (600‐900‐CF $115.00 36
RE303A MULTI‐PLEAT XL 11 HIGH CAP MERV 11 FILTER $115.00 36
SH6065 GLIDE PAD ‐ FELT WITH PSA 1/8 $13.00 36
SH60656 GLIDE PAD (PKG OF 6) 11IN X 5IN $51.00 36
SH6065BA GLIDE PAD ‐ FELT WITH PSA 1/8 $10.00 36
SH6065BA6 GLIDE PAD (PKG OF 6) $47.00 36
SG1606 GLIDE PADS (PKG OF 6) 8IN X 5IN $30.00 36
UG2006 GLIDE PAD (PKG OF 6) 12IN X 5IN $61.00 36
MPFD11 GLIDE PAD ‐ FELT WITH PSA $6.00 36
BHC2015 GLIDE PAD ‐ FELT BETAFLEX B76 WITH PSA $6.00 36
PLA450A FILTER ‐ MERV 11 PLEATED FILTER $89.00 36
For all PLA3-series Platinum machines.
MPD2175 GLIDE PAD ‐ FELT WITH PSA 1/8 $6.00
TSM1671 GLIDE PAD ‐ FELT WITH PSA 1/16 $9.00
TSM3556 EXHAUST FILTER BAGS 18 IN. ‐ 6/PKG $160.00
Phone: 1‐519‐352‐4550 Page 21 of 22 Fax: 1‐519‐352‐7676
PRICE LIST ‐ USD FUNDS Effective October 6, 2017
ITEM DESCRIPTION PRICE PAGE
GRINDING WHEELS
6MXR 6" CROSS GRIND WHEEL $37.00 37
Standard cross grind wheel for used on all belt driven cross grind stations prior to 2000-series machines.
Finishing Wheels ‐ 3 inch:
3BW BUFFING WHEEL $17.00 16
Quantities of 6: $15.98 3DR GRINDING WHEEL 3 X 1/4 X 3/8 RUBY $11.00 16
Quantities of 6: $10.34 3DW DETAIL WHEEL 3 X 1/4 X 3/8 $10.00 16
Quantities of 6: $9.40 Finishing Wheels ‐ 8 inch:
8VBP 8" GRINDING WHEEL (PURPLE) $39.00 37
The best form retention in the industry. Maintains radius/shape longer than any other wheel, saving you money. Unsurpassed finish translates to a superior quality sharpening.
Quantities of 6: $36.66
8GC 8" GRINDING WHEEL (GREEN) $37.00 37
Exceptional wheel for holding form - requires fewer dresses between sharpenings. Cool cutting action.
Quantities of 6: $34.78
8AS 8" GRINDING WHEEL (YELLOW) $44.00 37
High performance aerospace grade grinds cool and is optimal for edge retention.
Quantities of 6: $41.36
O8RUBY 8" GRINDING WHEEL (RUBY RED) $36.00 37
Open structured wheel for quick and cool cutting action. Ruby abrasive with a high chromium content.
Quantities of 6: $33.84
88R 8" GRINDING WHEEL (PINK) $30.00 37
Uniform grit and closed structure for a superior finish for recreational figure skates and goalie skates.
Quantities of 6: $28.20
8MXRUBY 8" GRINDING WHEEL (RUBY RED) $26.00 37
Premium ruby abrasive with a high chromium content. Well suited to both carbon and stainless steel blades. Multi-grit.
Quantities of 6: $24.44
8MXR 8" GRINDING WHEEL (BLUE) $26.00 37
All-purpose mutli-grit nitride grained wheel that is suitable for a wide variety of skate blades.
Quantities of 6: $24.44
Replacement Diamonds:
DIAMONDS AND QUILLS
TSM687 STD DIAMOND DRESSER 1/15 CARAT $21.00 38
TSM688 PREMIUM DIAMOND DRESSER 1/7 CARAT HD $38.00 38
CRC684 DIAMOND DRESSER 4‐1/4 $53.00
Replacement Quills:
TSM680N DIAMOND QUILL ASSY $124.00 38
TSM680PRO DIAMOND QUILL ASSY $155.00 38
For BREXD1, BRPD1 and BRPPRO series machines only.
TSM680 OLD DIAMOND QUILL ASSY $155.00
Phone: 1‐519‐352‐4550 Page 22 of 22 Fax: 1‐519‐352‐7676
